Designed protein pores as components for biosensors

Determining the Physical Properties of Molecules with Nanometer-Scale Pores

Nanometer-scale pores have been developed for the detection, characterization, and quantification of a wide range of analytes (e.g., ions, polymers, proteins, anthrax toxins, neurotransmitters, and synthetic nanoparticles) and for DNA sequencing. We describe the key requirements that made this method possible and how the technique evolved. Finally, we show that, despite sound theoretical work, which advanced both the conceptual framework and quantitative capability of the method, there are still unresolved questions that need to be addressed to further improve the technique.

Quantitative Framework for Stochastic Nanopore Sensors Using Multiple Channels

Membrane protein channels employed as stochastic sensors offer large signal-to-noise ratios and high specificity in single molecule binding measurements. Stochastic events in a single ion channel system can be measured using current-time traces, which are straightforward to analyze. Signals arising from measurement using multiple ion channels are more complicated to interpret. We show that multiple independent ion channels offer improved detection sensitivity compared to single channel measurements and that increased signal complexity can be accounted for using binding event frequency. More specifically, the leading edge of binding events follows a Poisson point process, which means signals from multiple channels can be superimposed and the association times (between each binding event leading edge), allow for sensitive and quantitative measurements. We expand our calibration to high ligand concentrations and high numbers of ion channels to demonstrate that there is an upper limit of quantification, defined by the time resolution of the measurement. The upper limit is a combination of the instrumental time resolution and the dissociation time of a ligand and protein which limits the number of detectable events. This upper limit also allows us to predict, in general, the measurement requirements needed to observe any process as a Poisson point process. The nanopore-based sensing analysis has wide implications for stochastic sensing platforms that operate using multiple simultaneous superimposable signals.

Building membrane nanopores

Membrane nanopores-hollow nanoscale barrels that puncture biological or synthetic membranes-have become powerful tools in chemical- and biosensing, and have achieved notable success in portable DNA sequencing. The pores can be self-assembled from a variety of materials, including proteins, peptides, synthetic organic compounds and, more recently, DNA. But which building material is best for which application, and what is the relationship between pore structure and function? In this Review, I critically compare the characteristics of the different building materials, and explore the influence of the building material on pore structure, dynamics and function. I also discuss the future challenges of developing nanopore technology, and consider what the next-generation of nanopore structures could be and where further practical applications might emerge.

Peptide-Mediated Nanopore Detection of Uranyl Ions in Aqueous Media

Uranium is one of the most common radioactive contaminants in the environment. As a major nuclear material in production, environmental samples (like soil and groundwater) can provide signatures on uranium production activity inside the facility. Thus, developing a new and portable analytical technology for uranium in aqueous media is significant not only for environmental monitoring, but also for nonproliferation. In this work, a label-free method for the detection of uranyl (UO₂²⁺) ions is developed by monitoring the translocation of a peptide probe in a nanopore. Based on the difference in the number of peptide events in the absence and presence of uranyl ions, nanomolar concentration of UO₂²⁺ ions could be detected in minutes. The method is highly selective; micromolar concentrations of Cd²⁺, Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺, Hg²⁺, Th⁴⁺, Mg²⁺, and Ca²⁺ would not interfere with the detection of UO₂²⁺ ions. In addition, simulated water samples were successfully analyzed.

Interference-Free Detection of Genetic Biomarkers Using Synthetic Dipole-Facilitated Nanopore Dielectrophoresis

The motion of polarizable particles in a nonuniform electric field (i.e., dielectrophoresis) has been extensively used for concentration, separation, sorting, and transport of biological particles from cancer cells and viruses to biomolecules such as DNAs and proteins. However, current approaches to dielectrophoretic manipulation are not sensitive enough to selectively target individual molecular species. Here, we describe the application of the dielectrophoretic principle for selective detection of DNA and RNA molecules using an engineered biological nanopore. The key element of our approach is a synthetic polycationic nanocarrier that selectively binds to the target biomolecules, dramatically increasing their dielectrophoretic response to the electric field gradient generated by the nanopore. The dielectrophoretic capture of the nanocarrier-target complexes is detected as a transient blockade of the nanopore ionic current, while any nontarget nucleic acids are repelled from the nanopore by electrophoresis and thus do not interfere with the signal produced by the target's capture. Strikingly, we show that even modestly charged nanocarriers can be used to capture DNA or RNA molecules of any length or secondary structure and simultaneously detect several molecular targets. Such selective, multiplex molecular detection technology would be highly desirable for real-time analysis of complex clinical samples.

Single Nanoparticle Translocation Through Chemically Modified Solid Nanopore

The nanopore sensor as a high-throughput and low-cost technology can detect single nanoparticle in solution. In the present study, the silicon nitride nanopores were fabricated by focused Ga ion beam (FIB), and the surface was functionalized with 3-aminopropyltriethoxysilane to change its surface charge density. The positively charged nanopore surface attracted negatively charged nanoparticles when they were in the vicinity of the nanopore. And, nanoparticle translocation speed was slowed down to obtain a clear and deterministic signal. Compared with previous studied small nanoparticles, the electrophoretic translocation of negatively charged polystyrene (PS) nanoparticles (diameter ~100 nm) was investigated in solution using the Coulter counter principle in which the time-dependent nanopore current was recorded as the nanoparticles were driven across the nanopore. A linear dependence was found between current drop and biased voltage. An exponentially decaying function (t d   ~ e (-v/v0) ) was found between the duration time and biased voltage. The interaction between the amine-functionalized nanopore wall and PS microspheres was discussed while translating PS microspheres. We explored also translocations of PS microspheres through amine-functionalized solid-state nanopores by varying the solution pH (5.4, 7.0, and 10.0) with 0.02 M potassium chloride (KCl). Surface functionalization showed to provide a useful step to fine-tune the surface property, which can selectively transport molecules or particles. This approach is likely to be applied to gene sequencing.

Outer membrane protein design

Membrane proteins are the gateway to the cell. These proteins are also a control center of the cell, as information from the outside is passed through membrane proteins as signals to the cellular machinery. The design of membrane proteins seeks to harness the power of these gateways and signal carriers. This review will focus on the design of the membrane proteins that are in the outer membrane, a membrane which only exists for gram negative bacteria, mitochondria, and chloroplasts. Unlike other membrane proteins, outer membrane proteins are uniquely shaped as β-barrels. Herein, I describe most known examples of membrane β-barrel design to date, focusing particularly on categorizing designs as: Firstly, structural deconstruction; secondly, structural changes; thirdly, chemical function design; and finally, the creation of new folds.

A monodisperse transmembrane α-helical peptide barrel

The fabrication of monodisperse transmembrane barrels formed from short synthetic peptides has not been demonstrated previously. This is in part because of the complexity of the interactions between peptides and lipids within the hydrophobic environment of a membrane. Here we report the formation of a transmembrane pore through the self-assembly of 35 amino acid α-helical peptides. The design of the peptides is based on the C-terminal D4 domain of the Escherichia coli polysaccharide transporter Wza. By using single-channel current recording, we define discrete assembly intermediates and show that the pore is most probably a helix barrel that contains eight D4 peptides arranged in parallel. We also show that the peptide pore is functional and capable of conducting ions and binding blockers. Such α-helix barrels engineered from peptides could find applications in nanopore technologies such as single-molecule sensing and nucleic-acid sequencing.

Unzipping of A-Form DNA-RNA, A-Form DNA-PNA, and B-Form DNA-DNA in the α-Hemolysin Nanopore

Unzipping of double-stranded nucleic acids by an electric field applied across a wild-type α-hemolysin (αHL) nanopore provides structural information about different duplex forms. In this work, comparative studies on A-form DNA-RNA duplexes and B-form DNA-DNA duplexes with a single-stranded tail identified significant differences in the blockage current and the unzipping duration between the two helical forms. We observed that the B-form duplex blocks the channel 1.9 ± 0.2 pA more and unzips ∼15-fold more slowly than an A-form duplex at 120 mV. We developed a model to describe the dependence of duplex unzipping on structure. We demonstrate that the wider A-form duplex (d = 2.4 nm) is unable to enter the vestibule opening of αHL on the cis side, leading to unzipping outside of the nanopore with higher residual current and faster unzipping times. In contrast, the smaller B-form duplexes (d = 2.0 nm) enter the vestibule of αHL, resulting in decreased current blockages and slower unzipping. We investigated the effects of varying the length of the single-stranded overhang, and studied A-form DNA-PNA duplexes to provide additional support for the proposed model. This study identifies key differences between A- and B-form duplex unzipping that will be important in the design of future probe-based methods for detecting DNA or RNA.

Digitally encoded DNA nanostructures for multiplexed, single-molecule protein sensing with nanopores

The simultaneous detection of a large number of different analytes is important in bionanotechnology research and in diagnostic applications. Nanopore sensing is an attractive method in this regard as the approach can be integrated into small, portable device architectures, and there is significant potential for detecting multiple sub-populations in a sample. Here, we show that highly multiplexed sensing of single molecules can be achieved with solid-state nanopores by using digitally encoded DNA nanostructures. Based on the principles of DNA origami, we designed a library of DNA nanostructures in which each member contains a unique barcode; each bit in the barcode is signalled by the presence or absence of multiple DNA dumbbell hairpins. We show that a 3-bit barcode can be assigned with 94% accuracy by electrophoretically driving the DNA structures through a solid-state nanopore. Select members of the library were then functionalized to detect a single, specific antibody through antigen presentation at designed positions on the DNA. This allows us to simultaneously detect four different antibodies of the same isotype at nanomolar concentration levels.

Bioinspired Protein Channel-Based Scanning Ion Conductance Microscopy (Bio-SICM) for Simultaneous Conductance and Specific Molecular Imaging

The utility of stochastic single-molecule detection using protein nanopores has found widespread application in bioanalytical sensing as a result of the inherent signal amplification of the resistive pulse method. Integration of protein nanopores with high-resolution scanning ion conductance microscopy (SICM) extends the utility of SICM by enabling selective chemical imaging of specific target molecules, while simultaneously providing topographical information about the net ion flux through a pore under a concentration gradient. In this study, we describe the development of a bioinspired scanning ion conductance microscopy (bio-SICM) approach that couples the imaging ability of SICM with the sensitivity and chemical selectivity of protein channels to perform simultaneous pore imaging and specific molecule mapping. To establish the framework of the bio-SICM platform, we utilize the well-studied protein channel α-hemolysin (αHL) to map the presence of β-cyclodextrin (βCD) at a substrate pore opening. We demonstrate concurrent pore and specific molecule imaging by raster scanning an αHL-based probe over a glass membrane containing a single 25-μm-diameter glass pore while recording the lateral positions of the probe and channel activity via ionic current. We use the average channel current to create a conductance image and the raw current-time traces to determine spatial localization of βCD. With further optimization, we believe that the bio-SICM platform will provide a powerful analytical methodology that is generalizable, and thus offers significant utility in a myriad of bioanalytical applications.

Decoding DNA, RNA and peptides with quantum tunnelling

Drugs and treatments could be precisely tailored to an individual patient by extracting their cellular- and molecular-level information. For this approach to be feasible on a global scale, however, information on complete genomes (DNA), transcriptomes (RNA) and proteomes (all proteins) needs to be obtained quickly and at low cost. Quantum mechanical phenomena could potentially be of value here, because the biological information needs to be decoded at an atomic level and quantum tunnelling has recently been shown to be able to differentiate single nucleobases and amino acids in short sequences. Here, we review the different approaches to using quantum tunnelling for sequencing, highlighting the theoretical background to the method and the experimental capabilities demonstrated to date. We also explore the potential advantages of the approach and the technical challenges that must be addressed to deliver practical quantum sequencing devices.

Membrane platforms for biological nanopore sensing and sequencing

In the past two decades, biological nanopores have been developed and explored for use in sensing applications as a result of their exquisite sensitivity and easily engineered, reproducible, and economically manufactured structures. Nanopore sensing has been shown to differentiate between highly similar analytes, measure polymer size, detect the presence of specific genes, and rapidly sequence nucleic acids translocating through the pore. Devices featuring protein nanopores have been limited in part by the membrane support containing the nanopore, the shortcomings of which have been addressed in recent work developing new materials, approaches, and apparatus resulting in membrane platforms featuring automatability and increased robustness, lifetime, and measurement throughput.

Molecular dynamics simulation of water permeation through the alpha-hemolysin channel

The alpha-hemolysin (AHL) nanochannel is a non-selective channel that allows for uncontrolled transport of small molecules across membranes leading to cell death. Although it is a bacterial toxin, it has promising applications, ranging from drug delivery systems to nano-sensing devices. This study focuses on the transport of water molecules through an AHL nanochannel using molecular dynamics (MD) simulations. Our results show that AHL can quickly transport water across membranes. The first-passage time approach was used to estimate the diffusion coefficient and the mean exit time. To study the energetics of transport, the potential of mean force (PMF) of a water molecule along the AHL nanochannel was calculated. The results show that the energy barriers of water permeation across a nanopore are always positive along the channel and the values are close to thermal energy (kBT). These findings suggest that the observed quick permeation of water is due to small energy barriers and a hydrophobic inner channel surface resulting in smaller friction. We speculate that these physical mechanisms are important in how AHL causes cell death.

Analytical applications for pore-forming proteins

Proteinaceous nanometer-scale pores are ubiquitous in biology. The canonical ionic channels (e.g., those that transport Na(+), K(+), Ca(2+), and Cl(-) across cell membranes) play key roles in many cellular processes, including nerve and muscle activity. Another class of channels includes bacterial pore-forming toxins, which disrupt cell function, and can lead to cell death. We describe here the recent development of these toxins for a wide range of biological sensing applications. This article is part of a Special Issue entitled: Pore-Forming Toxins edited by Mauro Dalla Serra and Franco Gambale.

Nanostructured materials detect epidermal growth factor receptor, neuron specific enolase and carcinoembryonic antigen

New nanostructured materials based on thin films of Cu and Ni deposited on textile material (veil), as well as gold nanostructured microspheres were used for the design of new stochastic sensors. The stochastic sensors were able to detect simultaneously a panel of biomarkers comprising epidermal growth factor receptor, neuron specific enolase, and carcinoembryonic antigen from whole blood samples with high reliabilities - recovery tests higher than 97.00%, with a RSD (%) lower than 0.1%. The stochastic sensors had shown high sensitivities and low determination levels for the detection of the proposed panel of biomarkers making early detection of lung cancer possible by fast screening of whole blood.

Nanopore-based analysis of biochemical species

Biological nanochannels or nanopores play a crucial role in basic biochemical processes in cells. Artificial nanopores possessing dimensions comparable to the size of biological molecules and mimicking the function of biological ion channels are of particular interest with respect to the design of biosensors with a sensitivity that can go down to the fM level and even to single molecule detection. Nanopore-based analysis (NPA) is currently a new research field with fascinating prospects. This review (with 118 refs.) summarizes the progress made in this field in the recent 10 years. Following an introduction into the fundamentals of NPA, we demonstrate its potential by describing selected methods for sensing (a) proteins such as streptavidin, certain antibodies, or thrombin via aptamers; (b) oligomers, larger nucleic acids, or micro-RNA; (c) small molecules, (d) ions such as K(I) which is vital to the maintenance of life, or Hg(II) which is dangerous to health. We summarize the results and discuss the merits and limitations of the various methods at last. Graphical abstractSchematic of a signal-off system and a signal-on system in nanopore analysis. The effective diameter of nanopores decreases when targets undergo certain interactions with receptors attached on the inner surface of the nanopore. Correspondingly, the current will drop on appearance of the analyte. This is referred to as a "signal-off" system. Conversely, it is called a "signal-on" system.

DNA-functionalized silicon nitride nanopores for sequence-specific recognition of DNA biosensor

Nanopores have been proven to be novel and versatile single-molecule sensors for individual unlabeled biopolymer detection and characterization. In the present study, a relatively large silicon nitride (Si3N4) nanopore with a diameter of approximately 60 nm was fabricated successfully using a focused Ga ion beam (FIB). We demonstrated a simple ex situ silanization procedure to control the size and functionality of solid-state nanopores. The presented results show that by varying the silanization time, it is possible to adjust the efficiency of probe molecule attachment, thus shrinking the pore to the chosen size, while introducing selective sensing probes. The functionalization of nanopores was verified by analysis of field-emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), and electrical measurements. Based on this study, we envision that the functionalized silicon nitride nanopores with the DNA probe might provide a biosensing platform for the detection and discrimination of a short single-stranded DNA oligomer of unknown sequences in the future.

Resolved single-molecule detection of individual species within a mixture of anti-biotin antibodies using an engineered monomeric nanopore

Oligomeric protein nanopores with rigid structures have been engineered for the purpose of sensing a wide range of analytes including small molecules and biological species such as proteins and DNA. We chose a monomeric β-barrel porin, OmpG, as the platform from which to derive the nanopore sensor. OmpG is decorated with seven flexible loops that move dynamically to create a distinct gating pattern when ionic current passes through the pore. Biotin was chemically tethered to the most flexible one of these loops. The gating characteristic of the loop's movement in and out of the porin was substantially altered by analyte protein binding. The gating characteristics of the pore with bound targets were remarkably sensitive to molecular identity, even providing the ability to distinguish between homologues within an antibody mixture. A total of five gating parameters were analyzed for each analyte to create a unique fingerprint for each biotin-binding protein. Our exploitation of gating noise as a molecular identifier may allow more sophisticated sensor design, while OmpG's monomeric structure greatly simplifies nanopore production.

Electromechanical Signatures for DNA Sequencing through a Mechanosensitive Nanopore

Biological nanopores have been extensively used for DNA base detection since these pores are widely available and tunable through mutations. Distinguishing bases of nucleic acids by passing them through nanopores has so far primarily relied on electrical signals-specifically, ionic currents through the nanopores. However, the low signal-to-noise ratio makes detection of ionic currents difficult. In this study, we show that the initially closed mechanosensitive channel of large conductance (MscL) protein pore opens for single-stranded DNA (ssDNA) translocation under an applied electric field. As each nucleotide translocates through the pore, a unique mechanical signal is observed-specifically, the tension in the membrane containing the MscL pore is different for each nucleotide. In addition to the membrane tension, we found that the ionic current is also different for the four nucleotide types. The initially closed MscL adapts its opening for nucleotide translocation due to the flexibility of the pore. This unique operation of MscL provides single nucleotide resolution in both electrical and mechanical signals. Finally, we also show that the speed of DNA translocation is roughly 1 order of magnitude slower in MscL compared to Mycobacterium smegmatis porin A (MspA), suggesting MscL to be an attractive protein pore for DNA sequencing.

Various strategies for obtaining oxidative artificial hemoproteins with a catalytic oxidative activity: from "Hemoabzymes" to "Hemozymes"?

The design of artificial hemoproteins that could lead to new biocatalysts for selective oxidation reactions using clean oxidants such as O 2 or H 2 O 2 under ecocompatible conditions constitutes a really promising challenge for a wide range of industrial applications. In vivo, such reactions are performed by heme-thiolate proteins, cytochromes P450, that catalyze the oxidation of drugs by dioxygen in the presence of electrons delivered from NADPH by cytochrome P450 reductase. Several strategies were used to design new artificial hemoproteins to mimic these enzymes, that associate synthetic metalloporphyrin derivatives to a protein that is supposed to induce a selectivity in the catalyzed reaction. A first generation of artificial hemoproteins or "hemoabzymes" was obtained by the non-covalent association of synthetic hemes such as N-methyl-mesoporphyrin IX, Fe(III) -α3β-tetra-o-carboxyphenylporphyrin or microperoxidase 8 with monoclonal antibodies raised against these cofactors. The obtained antibody-metalloporphyrin complexes displayed a peroxidase activity and some of them catalyzed the regio-selective nitration of phenols by H 2 O 2/ NO 2 and the stereo-selective oxidation of sulphides by H 2 O 2. A second generation of artificial hemoproteins or "hemozymes", was obtained by the non-covalent association of non-relevant proteins with metalloporphyrin derivatives. Several strategies were used, the most successful of which, named "host-guest" strategy involved the non-covalent incorporation of metalloporphyrin derivatives into easily affordable proteins. The artificial hemoproteins obtained were found to be able to perform efficiently the stereoselective oxidation of organic compounds such as sulphides and alkenes by H 2 O 2 and KHSO 5.

From “hemoabzymes” to “hemozymes”: towards new biocatalysts for selective oxidations

Two generations of artificial hemoproteins have been obtained: “hemoabzymes”, by non-covalent association of synthetic hemes with monoclonal antibodies raised against these cofactors and “hemozymes”, by non-covalent association of non-relevant proteins with metalloporphyrin derivatives. A review of the different strategies employed as well as their structural and catalytic properties is presented here.

Continuous observation of the stochastic motion of an individual small-molecule walker

Motion--whether it the ability to change shape, rotate or translate--is an important potential asset for functional nanostructures. For translational motion, a variety of DNA-based and small-molecule walkers have been created, but observing the translational motion of individual molecules in real time remains a significant challenge. Here, we show that the movement of a small-molecule walker along a five-foothold track can be monitored continuously within a protein nanoreactor. The walker is an organoarsenic(III) molecule with exchangeable thiol ligands, and the track a line of cysteine residues 6 Å apart within an α-haemolysin protein pore that acts as the nanoreactor. Changes in the flow of ionic current through the pore reflect the individual steps of a single walker, which require the making and breaking of As-S bonds, and occur in aqueous solution at neutral pH and room temperature. The walker moves considerably faster (∼0.7 s per step) than previous walkers based on covalent chemistry and is weakly processive (6 ± 1 steps per outing). It shows weak net directional movement, which can be described by a thermodynamic sink arising from the different environments of the cysteines that constitute the track.

Designing a hydrophobic barrier within biomimetic nanopores

Nanopores in membranes have a range of potential applications. Biomimetic design of nanopores aims to mimic key functions of biological pores within a stable template structure. Molecular dynamics simulations have been used to test whether a simple β-barrel protein nanopore can be modified to incorporate a hydrophobic barrier to permeation. Simulations have been used to evaluate functional properties of such nanopores, using water flux as a proxy for ionic conductance. The behavior of these model pores has been characterized as a function of pore size and of the hydrophobicity of the amino acid side chains lining the narrow central constriction of the pore. Potential of mean force calculations have been used to calculate free energy landscapes for water and for ion permeation in selected models. These studies demonstrate that a hydrophobic barrier can indeed be designed into a β-barrel protein nanopore, and that the height of the barrier can be adjusted by modifying the number of consecutive rings of hydrophobic side chains. A hydrophobic barrier prevents both water and ion permeation even though the pore is sterically unoccluded. These results both provide insights into the nature of hydrophobic gating in biological pores and channels, and furthermore demonstrate that simple design features may be computationally transplanted into β-barrel membrane proteins to generate functionally complex nanopores.

Channel-forming bacterial toxins in biosensing and macromolecule delivery

To intoxicate cells, pore-forming bacterial toxins are evolved to allow for the transmembrane traffic of different substrates, ranging from small inorganic ions to cell-specific polypeptides. Recent developments in single-channel electrical recordings, X-ray crystallography, protein engineering, and computational methods have generated a large body of knowledge about the basic principles of channel-mediated molecular transport. These discoveries provide a robust framework for expansion of the described principles and methods toward use of biological nanopores in the growing field of nanobiotechnology. This article, written for a special volume on "Intracellular Traffic and Transport of Bacterial Protein Toxins", reviews the current state of applications of pore-forming bacterial toxins in small- and macromolecule-sensing, targeted cancer therapy, and drug delivery. We discuss the electrophysiological studies that explore molecular details of channel-facilitated protein and polymer transport across cellular membranes using both natural and foreign substrates. The review focuses on the structurally and functionally different bacterial toxins: gramicidin A of Bacillus brevis, α-hemolysin of Staphylococcus aureus, and binary toxin of Bacillus anthracis, which have found their "second life" in a variety of developing medical and technological applications.

Monitoring charge flux to quantify unusual ligand-induced ion channel activity for use in biological nanopore-based sensors

The utility of biological nanopores for the development of sensors has become a growing area of interest in analytical chemistry. Their emerging use in chemical analysis is a result of several ideal characteristics. First, they provide reproducible control over nanoscale pore sizes with an atomic level of precision. Second, they are amenable to resistive-pulse type measurement systems when embedded into an artificial lipid bilayer. A single binding event causes a change in the flow of millions of ions across the membrane per second that is readily measured as a change in current with excellent signal-to-noise ratio. To date, ion channel-based biosensors have been limited to well-behaved proteins. Most demonstrations of using ion channels as sensors have been limited to proteins that remain in the open, conducting state, unless occupied by an analyte of interest. Furthermore, these proteins are nonspecific, requiring chemical, biochemical, or genetic manipulations to impart chemical specificity. Here, we report on the use of the pore-forming abilities of heat shock cognate 70 (Hsc70) to quantify a specific analyte. Hsc70 reconstitutes into phospholipid membranes and opens to form multiple conductance states specifically in the presence of ATP. We introduce the measurement of “charge flux” to characterize the ATP-regulated multiconductance nature of Hsc70, which enables sensitive quantification of ATP (100 μM–4 mM). We believe that monitoring protein-induced charge flux across a bilayer membrane represents a universal method for quantitatively monitoring ion-channel activity. This measurement has the potential to broaden the library of usable proteins in the development of nanopore-based biosensors.

Nanopore stochastic detection: diversity, sensitivity, and beyond

Nanopore sensors have emerged as a label-free and amplification-free technique for measuring single molecules. First proposed in the mid-1990s, nanopore detection takes advantage of the ionic current modulations produced by the passage of target analytes through a single nanopore at a fixed applied potential. Over the last 15 years, these nanoscale pores have been used to sequence DNA, to study covalent and non-covalent bonding interactions, to investigate biomolecular folding and unfolding, and for other applications. A major issue in the application of nanopore sensors is the rapid transport of target analyte molecules through the nanopore. Current recording techniques do not always accurately detect these rapid events. Therefore, researchers have looked for methods that slow molecular and ionic transport. Thus far, several strategies can improve the resolution and sensitivity of nanopore sensors including variation of the experimental conditions, use of a host compound, and modification of the analyte molecule and the nanopore sensor. In this Account, we highlight our recent research efforts that have focused on applications of nanopore sensors including the differentiation of chiral molecules, the study of enzyme kinetics, and the determination of sample purity and composition. Then we summarize our efforts to regulate molecular transport. We show that the introduction of various surface functional groups such as hydrophobic, aromatic, positively charged, and negatively charged residues in the nanopore interior, an increase in the ionic strength of the electrolyte solution, and the use of ionic liquid solutions as the electrolyte instead of inorganic salts may improve the resolution and sensitivity of nanopore stochastic sensors. Our experiments also demonstrate that the introduction of multiple functional groups into a single nanopore and the development of a pattern-recognition nanopore sensor array could further enhance sensor resolution. Although we have demonstrated the feasibility of nanopore sensors for various applications, challenges remain before nanopore sensing is deployed for routine use in applications such as medical diagnosis, homeland security, pharmaceutical screening, and environmental monitoring.

Reconstitution of cholesterol-dependent vaginolysin into tethered phospholipid bilayers: implications for bioanalysis

Functional reconstitution of the cholesterol-dependent cytolysin vaginolysin (VLY) from Gardnerella vaginalis into artificial tethered bilayer membranes (tBLMs) has been accomplished. The reconstitution of VLY was followed in real-time by electrochemical impedance spectroscopy (EIS). Changes of the EIS parameters of the tBLMs upon exposure to VLY solutions were consistent with the formation of water-filled pores in the membranes. It was found that reconstitution of VLY is a strictly cholesterol-dependent, irreversible process. At a constant cholesterol concentration reconstitution of VLY occurred in a concentration-dependent manner, thus allowing the monitoring of VLY concentration and activity in vitro and opening possibilities for tBLM utilization in bioanalysis. EIS methodology allowed us to detect VLY down to 0.5 nM (28 ng/mL) concentration. Inactivation of VLY by certain amino acid substitutions led to noticeably lesser tBLM damage. Pre-incubation of VLY with the neutralizing monoclonal antibody 9B4 inactivated the VLY membrane damage in a concentration-dependent manner, while the non-neutralizing antibody 21A5 exhibited no effect. These findings demonstrate the biological relevance of the interaction between VLY and the tBLM. The membrane-damaging interaction between VLY and tBLM was observed in the absence of the human CD59 receptor, known to strongly facilitate the hemolytic activity of VLY. Taken together, our study demonstrates the applicability of tBLMs as a bioanalytical platform for the detection of the activity of VLY and possibly other cholesterol-dependent cytolysins.

Nanopore detection of copper ions using a polyhistidine probe

We report a stochastic nanopore sensing method for the detection of Cu(2+) ions. By employing a polyhistidine molecule as a chelating agent, and based on the different signatures of the events produced by the translocation of the chelating agent through an α-hemolysin pore in the absence and presence of target analytes, trace amounts of copper ions could be detected with a detection limit of 40 nM. Importantly, although Co(2+), Ni(2+), and Zn(2+) also interacts with the polyhistidine molecule, since the event residence times and/or blockage amplitudes for these metal chelates are significantly different from those of copper chelates, these metal ions do not interfere with Cu(2+) detection. This chelating reaction approach should find useful application in the development of nanopore sensors for other metal ions.

Biosensors in the small scale: methods and technology trends

This study presents a review on biosensors with an emphasis on recent developments in the field. A brief history accompanied by a detailed description of the biosensor concepts is followed by rising trends observed in contemporary micro- and nanoscale biosensors. Performance metrics to quantify and compare different detection mechanisms are presented. A comprehensive analysis on various types and subtypes of biosensors are given. The fields of interest within the scope of this review are label-free electrical, mechanical and optical biosensors as well as other emerging and popular technologies. Especially, the latter half of the last decade is reviewed for the types, methods and results of the most prominently researched detection mechanisms. Tables are provided for comparison of various competing technologies in the literature. The conclusion part summarises the noteworthy advantages and disadvantages of all biosensors reviewed in this study. Furthermore, future directions that the micro- and nanoscale biosensing technologies are expected to take are provided along with the immediate outlook.

Channel size conversion of Phi29 DNA-packaging nanomotor for discrimination of single- and double-stranded nucleic acids

Nanopores have been utilized to detect the conformation and dynamics of polymers, including DNA and RNA. Biological pores are extremely reproducible at the atomic level with uniform channel sizes. The channel of the bacterial virus phi29 DNA-packaging motor is a natural conduit for the transportation of double-stranded DNA (dsDNA) and has the largest diameter among the well-studied biological channels. The larger channel facilitates translocation of dsDNA and offers more space for further channel modification and conjugation. Interestingly, the relatively large wild-type channel, which translocates dsDNA, cannot detect single-stranded nucleic acids (ssDNA or ssRNA) under the current experimental conditions. Herein, we reengineered this motor channel by removing the internal loop segment of the channel. The modification resulted in two classes of channels. One class was the same size as the wild-type channel, while the other class had a cross-sectional area about 60% of the wild-type. This smaller channel was able to detect the real-time translocation of single-stranded nucleic acids at single-molecule level. While the wild-type connector exhibited a one-way traffic property with respect to dsDNA translocation, the loop-deleted connector was able to translocate ssDNA and ssRNA with equal competencies from both termini. This finding of size alterations in reengineered motor channels expands the potential application of the phi29 DNA-packaging motor in nanomedicine, nanobiotechnology, and high-throughput single-pore DNA sequencing.

Solid-State and Biological Nanopore for Real-Time Sensing of Single Chemical and Sequencing of DNA

Sensitivity and specificity are two most important factors to take into account for molecule sensing, chemical detection and disease diagnosis. A perfect sensitivity is to reach the level where a single molecule can be detected. An ideal specificity is to reach the level where the substance can be detected in the presence of many contaminants. The rapidly progressing nanopore technology is approaching this threshold. A wide assortment of biomotors and cellular pores in living organisms perform diverse biological functions. The elegant design of these transportation machineries has inspired the development of single molecule detection based on modulations of the individual current blockage events. The dynamic growth of nanotechnology and nanobiotechnology has stimulated rapid advances in the study of nanopore based instrumentation over the last decade, and inspired great interest in sensing of single molecules including ions, nucleotides, enantiomers, drugs, and polymers such as PEG, RNA, DNA, and polypeptides. This sensing technology has been extended to medical diagnostics and third generation high throughput DNA sequencing. This review covers current nanopore detection platforms including both biological pores and solid state counterparts. Several biological nanopores have been studied over the years, but this review will focus on the three best characterized systems including α-hemolysin and MspA, both containing a smaller channel for the detection of single-strand DNA, as well as bacteriophage phi29 DNA packaging motor connector that contains a larger channel for the passing of double stranded DNA. The advantage and disadvantage of each system are compared; their current and potential applications in nanomedicine, biotechnology, and nanotechnology are discussed.

Natural channel protein inserts and functions in a completely artificial, solid-supported bilayer membrane

Reconstitution of membrane proteins in artificial membrane systems creates a platform for exploring their potential for pharmacological or biotechnological applications. Previously, we demonstrated amphiphilic block copolymers as promising building blocks for artificial membranes with long-term stability and tailorable structural parameters. However, the insertion of membrane proteins has not previously been realized in a large-area, stable, and solid-supported artificial membrane. Here, we show the first, preliminary model of a channel membrane protein that is functionally incorporated in a completely artificial polymer, tethered, solid-supported bilayer membrane (TSSBM). Unprecedented ionic transport characteristics that differ from previous results on protein insertion into planar, free-standing membranes, are identified. Our findings mark a change in understanding protein insertion and ion flow within natural channel proteins when inserted in an artificial TSSBM, thus holding great potential for numerous applications such as drug screening, trace analyzing, and biosensing.

Metal-organic transmembrane nanopores

A stable tetraporphyrin metallacycle with Re(I) corners (1) is capable of forming nanopores in a liposomial membrane, provided that the porphyrin units are properly functionalized with peripheral carboxylic acid residues that, by establishing an hydrogen bond network, allow the formation of dimers that span the depth of the membrane.

The role of Lys147 in the interaction between MPSA-gold nanoparticles and the α-hemolysin nanopore

Single channel recordings were used to determine the effect of direct electrostatic interactions between sulfonate-coated gold nanoparticles and the constriction of the Staphylococcus aureus α-hemolysin protein channel on the ionic current amplitude. We provide evidence that Lys147 of α-hemolysin can interact with the sulfonate groups at the nanoparticle surface, and these interactions can reversibly block 100% of the residual ionic current. Lys147 is normally involved in a salt bridge with Glu111. The capture of a nanoparticle leads to a partial current block at neutral pH values, but protonation of Glu111 at pH 2.8 results in a full current block when the nanoparticle is captured. At pH 2.8, we suggest that Lys147 is free to engage in electrostatic interactions with sulfonates at the nanoparticle surface. To verify our results, we engineered a mutation in the α-hemolysin protein, where Glu111 is substituted by Ala (E111A), thus removing Glu111-Lys147 interactions and facilitating Lys147-sulfonate electrostatic interactions. This mutation leads to a 100% current block at pH 2.8 and a 92% block at pH 8.0, showing that electrostatic interactions are formed between the nanopore and the nanoparticle surface. Besides demonstrating the effect of electrostatic interactions on cross channel ionic current, this work offers a novel approach to controlling open and closed states of the α-hemolysin nanopore as a function of external gears.

Protein nanotubes, channels and cages

Proteins are the work-horses of life and excute the essential processes involved in the growth and repair of cells. These roles include all aspects of cell signalling, metabolism and repair that allow living things to exist. They are not only chemical catalysts and machine components, they are also structural components of the cell or organism, capable of self-organisation into strong supramolecular cages, fibres and meshes. How proteins are encoded genetically and how they are sythesised in vivo is now well understood, and for an increasing number of proteins, the relationship between structure and function is known in exquisite detail. The next challenge in bionanoscience is to adapt useful protein systems to build new functional structures. Well-defined natural structures with potential useful shapes are a good starting point. With this in mind, in this chapter we discuss the properties of natural and artificial protein channels, nanotubes and cages with regard to recent progress and potential future applications. Chemistries for attaching together different proteins to form superstructures are considered as well as the difficulties associated with designing complex protein structures ab initio.

Tetrameric assembly of KvLm K+ channels with defined numbers of voltage sensors

Voltage-gated K(+) (Kv) channels are tetrameric assemblies in which each modular subunit consists of a voltage sensor and a pore domain. KvLm, the voltage-gated K(+) channel from Listeria monocytogenes, differs from other Kv channels in that its voltage sensor contains only three out of the eight charged residues previously implicated in voltage gating. Here, we ask how many sensors are required to produce a functional Kv channel by investigating heterotetramers comprising combinations of full-length KvLm (FL) and its sensorless pore module. KvLm heterotetramers were produced by cell-free expression, purified by electrophoresis, and shown to yield functional channels after reconstitution in droplet interface bilayers. We studied the properties of KvLm channels with zero, one, two, three, and four voltage sensors. Three sensors suffice to promote channel opening with FL(4)-like voltage dependence at depolarizing potentials, but all four sensors are required to keep the channel closed during membrane hyperpolarization.

Nanochannels preparation and application in biosensing

Selective transport in nanochannels (protein-based ion channels) is already used in living systems for electrical signaling in nerves and muscles, and this natural behavior is being approached for the application of biomimetic nanochannels in biosensors. On the basis of this principle, single nanochannels and nanochannel arrays seem to bring new advantages for biosensor development and applications. The purpose of this review is to provide a general comprehensive and critical overview on the latest trends in the development of nanochannel-based biosensing systems. A detailed description and discussion of representative and recent works covering the main nanochannel fabrication techniques, nanoporous material characterizations, and especially their application in both electrochemical and optical sensing systems is given. The state-of-the-art of the developed technology may open the way to new advances in the integration of nanochannels with (bio)molecules and synthetic receptors for the development of novel biodetection systems that can be extended to many other applications with interest for clinical analysis, safety, and security as well as environmental and other industrial studies and applications.

Detecting and characterizing individual molecules with single nanopores

Single-nanometer-scale pores have demonstrated the capability for the detection, identification, and characterization of individual molecules. This measurement method could soon extend the existing commercial instrumentation or provide solutions to niche applications in many fields, including health care and the basic sciences. However, that paradigm shift requires a significantly better understanding of the physics and chemistry that govern the interactions between nanopores and analytes. We describe herein some of our methods and approaches to address this issue.