Electroporation of mammalian cells in a microfluidic channel with geometric variation

Microfluidic electro-sonoporation: a multi-modal cell poration methodology through simultaneous application of electric field and ultrasonic wave

A microfluidic device that simultaneously applies the conditions required for microelectroporation and microsonoporation in a flow-through scheme toward high-efficiency and high-throughput molecular delivery into mammalian cells is presented. This multi-modal poration microdevice using simultaneous application of electric field and ultrasonic wave was realized by a three-dimensional (3D) microelectrode scheme where the electrodes function as both electroporation electrodes and cell flow channel so that acoustic wave can be applied perpendicular to the electric field simultaneously to cells flowing through the microfluidic channel. This 3D microelectrode configuration also allows a uniform electric field to be applied while making the device compatible with fluorescent microscopy. It is hypothesized that the simultaneous application of two different fields (electric field and acoustic wave) in perpendicular directions allows formation of transient pores along two axes of the cell membrane at reduced poration intensities, hence maximizing the delivery efficiency while minimizing cell death. The microfluidic electro-sonoporation system was characterized by delivering small molecules into mammalian cells, and showed average poration efficiency of 95.6% and cell viability of 97.3%. This proof of concept result shows that by combining electroporation and sonoporation together, significant improvement in molecule delivery efficiency could be achieved while maintaining high cell viability compared to electroporation or sonoporation alone. The microfluidic electro-sonoporation device presented here is, to the best of our knowledge, the first multi-modal cell poration device using simultaneous application of electric field and ultrasonic wave. This new multi-modal cell poration strategy and system is expected to have broad applications in delivery of small molecule therapeutics and ultimately in large molecule delivery such as gene transfection applications where high delivery efficiency and high viability are crucial.

Gene delivery by microfluidic flow-through electroporation based on constant DC and AC field

Electroporation is one of the most widely used physical methods to deliver exogenous nucleic acids into cells with high efficiency and low toxicity. Conventional electroporation systems typically require expensive pulse generators to provide short electrical pulses at high voltage. In this work, we demonstrate a flow-through electroporation method for continuous transfection of cells based on disposable chips, a syringe pump, and a low-cost power supply that provides a constant voltage. We successfully transfect cells using either DC or AC voltage with high flow rates (ranging from 40 µl/min to 20 ml/min) and high efficiency (up to 75%). We also enable the entire cell membrane to be uniformly permeabilized and dramatically improve gene delivery by inducing complex migrations of cells during the flow.

Flow-through comb electroporation device for delivery of macromolecules

We present a microfluidic electroporation device with a comb electrode layout fabricated in polydimethylsiloxane (PMDS) and glass. Characterization experiments with HeLa cells and fluorescent dextran show efficient delivery (∼95%) with low toxicity (cell viability ∼85%) as well as rapid pore closure after electroporation. The activity of delivered molecules is also verified by silencing RNA (siRNA) studies that demonstrate gene knockdown in GFP expressing cells. This simple, scalable approach to microfluidic, flow-through electroporation could facilitate the integration of electroporation modules within cell analysis devices that perform multiple operations.

Analysis of intracellular reducing levels in human hepatocytes on three-dimensional focusing microchip

A novel three-dimensional hydrodynamic focusing microfluidic device integrated with high-throughput cell sampling and detection of intracellular contents is presented. It has a pivotal role in maintaining the reducing environment in cells. Intracellular reducing species such as vitamin C and glutathione in normal and tumor cells were labeled by a newly synthesized 2,2,6,6-tetramethyl-piperidine-1-oxyl-based fluorescent probe. Hepatocytes are adherent cells, which are prone to attaching to the channel surface. To avoid the attachment of cells on the channel surface, a single channel microchip with three sheath-flow channels located on both sides of and below the sampling channel was developed. Hydrostatic pressure generated by emptying the sample waste reservoir was used as driving force of fluid on the microchip. Owing to the difference between the liquid levels of the reservoirs, the labeled cells were three-dimensional hydrodynamically focused and transported from the sample reservoir to the sample waste reservoir. Hydrostatic pressure takes advantage of its ease of generation on a microfluidic chip without any external pressure pump, which drives three sheath-flow streams to constrain a sample flow stream into a narrow stream to avoid blockage of the sampling channel by adhered cells. The intracellular reducing levels of HepG2 cells and L02 cells were detected by home-built laser-induced fluorescence detector. The analysis throughput achieved in this microfluidic system was about 59-68 cells/min.

Droplet sorting based on the number of encapsulated particles using a solenoid valve

Droplet microfluidics provides a high-throughput platform for screening subjects and conditions involved in biology. Droplets with encapsulated beads and cells have been increasingly used for studying molecular and cellular biology. Droplet sorting is needed to isolate and analyze the subject of interest during such screening. The vast majority of current sorting techniques use fluorescence intensity emitted by each droplet as the only criterion. However, due to the randomness and imperfections in the encapsulation process, typically a mixed population of droplets with an uneven number of encapsulated particles results and is used for screening. Thus droplet sorting based on the number of encapsulated particles becomes necessary for isolating or enriching droplets with a specific occupancy. In this work, we developed a fluorescence-activated microfluidic droplet sorter that integrated a simple deflection mechanism based on the use of a solenoid valve and a sophisticated signal processing system with a microcontroller as the core. By passing droplets through a narrow interrogation channel, the encapsulated particles were detected individually. The microcontroller conducted the computation to determine the number of encapsulated particles in each droplet and made the sorting decision accordingly that led to actuation of the solenoid valve. We tested both fluorescent beads and stained cells and our results showed high efficiency and accuracy for sorting and enrichment.

Micro-/nanofluidics based cell electroporation

Non-viral gene delivery has been extensively explored as the replacement for viral systems. Among various non-viral approaches, electroporation has gained increasing attention because of its easy operation and no restrictions on probe or cell type. Several effective systems are now available on the market with reasonably good gene delivery performance. To facilitate broader biological and medical applications, micro-/nanofluidics based technologies were introduced in cell electroporation during the past two decades and their advances are summarized in this perspective. Compared to the commercially available bulk electroporation systems, they offer several advantages, namely, (1) sufficiently high pulse strength generated by a very low potential difference, (2) conveniently concentrating, trapping, and regulating the position and concentration of cells and probes, (3) real-time monitoring the intracellular trafficking at single cell level, and (4) flexibility on cells to be transfected (from single cell to large scale cell population). Some of the micro-devices focus on cell lysis or fusion as well as the analysis of cellular properties or intracellular contents, while others are designed for gene transfection. The uptake of small molecules (e.g., dyes), DNA plasmids, interfering RNAs, and nanoparticles has been broadly examined on different types of mammalian cells, yeast, and bacteria. A great deal of progress has been made with a variety of new micro-/nanofluidic designs to address challenges such as electrochemical reactions including water electrolysis, gas bubble formation, waste of expensive reagents, poor cell viability, low transfection efficacy, higher throughput, and control of transfection dosage and uniformity. Future research needs required to advance micro-/nanofluidics based cell electroporation for broad life science and medical applications are discussed.

Genomic DNA extraction from cells by electroporation on an integrated microfluidic platform

The vast majority of genetic analysis of cells involves chemical lysis for release of DNA molecules. However, chemical reagents required in the lysis interfere with downstream molecular biology and often require removal after the step. Electrical lysis based on irreversible electroporation is a promising technique to prepare samples for genetic analysis due to its purely physical nature, fast speed, and simple operation. However, there has been no experimental confirmation on whether electrical lysis extracts genomic DNA from cells in a reproducible and efficient fashion in comparison to chemical lysis, especially for eukaryotic cells that have most of the DNA enclosed in the nucleus. In this work, we construct an integrated microfluidic chip that physically traps a low number of cells, lyses the cells using electrical pulses rapidly, then purifies and concentrates genomic DNA. We demonstrate that electrical lysis offers high efficiency for DNA extraction from both eukaryotic cells (up to ∼36% for Chinese hamster ovary cells) and bacterial cells (up to ∼45% for Salmonella typhimurium) that is comparable to the widely used chemical lysis. The DNA extraction efficiency has dependence on both the electric parameters and relative amount of beads used for DNA adsorption. We envision that electroporation-based DNA extraction will find use in ultrasensitive assays that benefit from minimal dilution and simple procedures.

Single-cell electroporation using proton beam fabricated biochips

We report the design and fabrication of a novel single cell electroporation biochip featuring high aspect ratio nickel micro-electrodes with smooth side walls between which individual cells are attached. The biochip is fabricated using Proton Beam Writing (PBW), a new direct write lithographic technique capable of fabricating high quality high-aspect-ratio nano and microstructures. By applying electrical impulses across the biochip electrodes, SYTOX® Green nucleic acid stain is incorporated into mouse neuroblastoma (N2a) cells and observed via green fluorescence when the stain binds with DNA inside the cell nucleus. Three parameters; electric field strength, pulse duration, and numbers of pulses have been investigated for the single cell electroporation process. The results indicate high transfection rates as well as cell viability of 82.1 and 86.7% respectively. This single cell electroporation system may represent a promising method for the introduction of a wide variety of fluorophores, nanoparticles, quantum dots, DNAs and proteins into cells.

Low-frequency ac electroporation shows strong frequency dependence and yields comparable transfection results to dc electroporation

Conventional electroporation has been conducted by employing short direct current (dc) pulses for delivery of macromolecules such as DNA into cells. The use of alternating current (ac) field for electroporation has mostly been explored in the frequency range of 10kHz-1MHz. Based on Schwan equation, it was thought that with low ac frequencies (10Hz-10kHz), the transmembrane potential does not vary with the frequency. In this report, we utilized a flow-through electroporation technique that employed continuous 10Hz-10kHz ac field (based on either sine waves or square waves) for electroporation of cells with defined duration and intensity. Our results reveal that electropermeabilization becomes weaker with increased frequency in this range. In contrast, transfection efficiency with DNA reaches its maximum at medium frequencies (100-1000Hz) in the range. We postulate that the relationship between the transfection efficiency and the ac frequency is determined by combined effects from electrophoretic movement of DNA in the ac field, dependence of the DNA/membrane interaction on the ac frequency, and variation of transfection under different electropermeabilization intensities. The fact that ac electroporation in this frequency range yields high efficiency for transfection (up to ~71% for Chinese hamster ovary cells) and permeabilization suggests its potential for gene delivery.

Controlled electroporation of the plasma membrane in microfluidic devices for single cell analysis

Chemical cytometry on a single cell level is of interest to various biological fields ranging from cancer to stem cell research. The impact chemical cytometry can exert in these fields depends on the dimensionality of the retrievable analytes content. To this point, the number of different analytes identifiable and additionally their subcellular localization is of interest. To address this, we present an electroporation based approach for selective lysis of only the plasma membrane, which permits analysis of the dissolved cytoplasm, while reducing contributions from the nucleus and membrane bound fractions of the cell analytes. The use of 100 μs long pulse and a well defined DC electric field gradient of ∼4.5 kV·cm(-1) generated by 3D electrodes initiates release of a cytoplasm marker in ≪1 s, while retaining nuclear fluorescence markers.

Contrast agent-free sonoporation: The use of an ultrasonic standing wave microfluidic system for the delivery of pharmaceutical agents

Sonoporation is a useful biophysical mechanism for facilitating the transmembrane delivery of therapeutic agents from the extracellular to the intracellular milieu. Conventionally, sonoporation is carried out in the presence of ultrasound contrast agents, which are known to greatly enhance transient poration of biological cell membranes. However, in vivo contrast agents have been observed to induce capillary rupture and haemorrhage due to endothelial cell damage and to greatly increase the potential for cell lysis in vitro. Here, we demonstrate sonoporation of cardiac myoblasts in the absence of contrast agent (CA-free sonoporation) using a low-cost ultrasound-microfluidic device. Within this device an ultrasonic standing wave was generated, allowing control over the position of the cells and the strength of the acoustic radiation forces. Real-time single-cell analysis and retrospective post-sonication analysis of insonated cardiac myoblasts showed that CA-free sonoporation induced transmembrane transfer of fluorescent probes (CMFDA and FITC-dextran) and that different mechanisms potentially contribute to membrane poration in the presence of an ultrasonic wave. Additionally, to the best of our knowledge, we have shown for the first time that sonoporation induces increased cell cytotoxicity as a consequence of CA-free ultrasound-facilitated uptake of pharmaceutical agents (doxorubicin, luteolin, and apigenin). The US-microfluidic device designed here provides an in vitro alternative to expensive and controversial in vivo models used for early stage drug discovery, and drug delivery programs and toxicity measurements.

Electroactive microwell arrays for highly efficient single-cell trapping and analysis

We present a novel method, implemented in the form of a microfluidic device, for arraying and analyzing large populations of single cells. The device contains a large array of electroactive microwells where manipulation and analysis of large population of cells are carried out. On the device, single cells can be actively trapped in the microwells by dielectrophoresis (DEP) and then lysed by electroporation (EP) for subsequent analysis of the confined cell lysates. The DEP force in the selected dimensions of the microwells could achieve efficient trapping in nearly all the microwells (95%) in less than three minutes. Moreover, the positions of the cells in the microwells are maintained even when unstable flow of liquid is applied. This makes it possible to exchange the DEP buffer to a solution that will be subsequently used for stimulating or analyzing the trapped cells. After closing the microwells, EP is conducted to lyse the trapped cells by applying short electric pulses. Tight enclosure is critical to prevent dilution, diffusion and cross contamination of the cell lysates. We demonstrated the feasibility of our approach with an enzymatic assay measuring the intracellular-galactosidase activity. The use of this method should greatly help analysis of large populations of cells at the single-cell level. Furthermore, the method offers rapidity in the trapping and analysis of multiple cell types in physiological conditions that will be important to ensure the relevance of single cell analyses.

Carbon nanotubes for voltage reduction and throughput enhancement of electrical cell lysis on a lab-on-a-chip

We report on the enhancement of electrical cell lysis using carbon nanotubes (CNTs). Electrical cell lysis systems are widely utilized in microchips as they are well suited to integration into lab-on-a-chip devices. However, cell lysis based on electrical mechanisms has high voltage requirements. Here, we demonstrate that by incorporating CNTs into microfluidic electrolysis systems, the required voltage for lysis is reduced by half and the lysis throughput at low voltages is improved by ten times, compared to non-CNT microchips. In our experiment, E. coli cells are lysed while passing through an electric field in a microchannel. Based on the lightning rod effect, the electric field strengthened at the tip of the CNTs enhances cell lysis at lower voltage and higher throughput. This approach enables easy integration of cell lysis with other on-chip high-throughput sample-preparation processes.

Transfection of cells using flow-through electroporation based on constant voltage

Electroporation is a high-efficiency and low-toxicity physical gene transfer method. Classical electroporation protocols are limited by the small volume of cell samples processed (less than 10(7) cells per reaction) and low DNA uptake due to partial permeabilization of the cell membrane. Here we describe a flow-through electroporation protocol for continuous transfection of cells, using disposable devices, a syringe pump and a low-cost power supply that provides a constant voltage. We show transfection of cell samples with rates ranging from 40 μl min(-1) to 20 ml min(-1) with high efficiency. By inducing complex migrations of cells during the flow, we also show permeabilization of the entire cell membrane and markedly increased DNA uptake. The fabrication of the devices takes 1 d and the flow-through electroporation typically takes 1-2 h.

An electroactive microwell array for trapping and lysing single-bacterial cells

Interest in single-cell analysis has increased because it allows to understand cell metabolism and characterize disease states, cellular adaptation to environmental changes, cell cycles, etc. Here, the authors propose a device to electrically trap and lyse single-bacterial cells in an array format for high-throughput single-cell analysis. The applied electric field is highly deformed and concentrated toward the inside of the microwell structures patterned on the planar electrode. This configuration effectively generates dielectrophoretic force to attract a single cell per well. The microwell has a comparable size to the target bacterial cell making it possible to trap single cells by physically excluding additional cells. Inducing highly concentrated electric potential on the cell membrane can also effectively lyse the trapped single-bacterial cells. The feasibility of the authors' approach was demonstrated by trapping and lysing Escherichia coli cells at the single-cell level. The present microwell array can be used as a basic tool for individual bacterial cell analysis.

High-throughput single-cell manipulation system for a large number of target cells

A sequential and high-throughput single-cell manipulation system for a large volume of cells was developed and the successive manipulation for single cell involving single-cell isolation, individual labeling, and individual rupture was realized in a microhydrodynamic flow channel fabricated by using two-dimensional simple flow channels. This microfluidic system consisted of the successive single-cell handlings of single-cell isolation from a large number of cells in cell suspension, labeling each isolated single cell and the lysate extraction from each labeled single cell. This microfluidic system was composed of main channels, cell-trapping pockets, drain channels, and single-cell content collection channels which were fabricated by polydimethylsiloxane. We demonstrated two kinds of prototypes for sequential single-cell manipulations, one was equipped with 16 single-cell isolation pockets in microchannel and the other was constructed of 512 single-cell isolation pockets. In this study, we demonstrated high-throughput and high-volume single-cell isolation with 512 pocket type device. The total number of isolated single cells in each isolation pocket from the cell suspension at a time was 426 for the cell line of African green monkey kidney, COS-1, and 360 for the rat primary brown preadipocytes, BAT. All isolated cells were stained with fluorescence dye injected into the same microchannel successfully. In addition, the extraction and collection of the cell contents was demonstrated using isolated stained COS-1 cells. The cell contents extracted from each captured cell were individually collected within each collection channel by local hydrodynamic flow. The sequential trapping, labeling, and content extraction with 512 pocket type devices realized high-throughput single-cell manipulations for innovative single-cell handling, feasible staining, and accurate cell rupture.

Electrokinetic gated injection-based microfluidic system for quantitative analysis of hydrogen peroxide in individual HepG2 cells

A microfluidic system to determine hydrogen peroxide (H(2)O(2)) in individual HepG2 cells based on the electrokinetic gated injection was developed for the first time. A home-synthesized fluorescent probe, bis(p-methylbenzenesulfonate)dichlorofluorescein (FS), was employed to label intracellular H(2)O(2) in the intact cells. On a simple cross microchip, multiple single-cell operations, including single cell injection, cytolysis, electrophoresis separation and detection of H(2)O(2), were automatically carried out within 60 s using the electrokinetic gated injection and laser-induced fluorescence detection (LIFD). The performance of the method was evaluated under the optimal conditions. The linear calibration curve was over a range of 4.39-610 amol (R(2)=0.9994). The detection limit was 0.55 amol or 9.0×10(-10) M (S/N=3). The relative standard deviations (RSDs, n=6) of migration time and peak area were 1.4% and 4.8%, respectively. With the use of this method, the average content of H(2)O(2) in single HepG2 cells was found to be 16.09±9.84 amol (n=15). Separation efficiencies in excess of 17,000 theoretical plates for the cells were achieved. These results demonstrated that the efficient integration and automation of these single-cell operations enabled the sensitive, reproducible, and quantitative examination of intracellular H(2)O(2) at single-cell level. Owing to the advantages of simple microchip structure, controllable single-cell manipulation and ease in building, this platform provides a universal way to automatically determine other intracellular constituents within single cells.

Micro-sized microbial fuel cell: a mini-review

This review presents the development of micro-sized microbial fuel cells (including mL-scale and μL-scale setups), with summarization of their advantageous characteristics, fabrication methods, performances, potential applications and possible future directions. The performance of microbial fuel cells (MFCs) is affected by issues such as mass transport, reaction kinetics and ohmic resistance. These factors are manipulated in micro-sized MFCs using specially allocated electrodes constructed with specified materials having physically or chemically modified surfaces. Both two-chamber and air-breathing cathodes are promising configurations for mL-scale MFCs. However, most of the existing μL-scale MFCs generate significantly lower volumetric power density compared with their mL-counterparts because of the high internal resistance. Although μL-scale MFCs have not yet to provide sufficient power for operating conventional equipment, they show great potential in rapid screening of electrochemically microbes and electrode performance. Additional possible applications and future directions are also provided for the development of micro-sized MFCs.

Kinetics of NF-κB nucleocytoplasmic transport probed by single-cell screening without imaging

Transport of protein and RNA cargoes between the nucleus and cytoplasm (nucleocytoplasmic transport) is vital for a variety of cellular functions. The studies of kinetics involved in such processes have been hindered by the lack of quantitative tools for measurement of the nuclear and cytosolic fractions of an intracellular protein at the single cell level for a cell population. In this report, we describe using a novel method, microfluidic electroporative flow cytometry, to study kinetics of nucleocytoplasmic transport of an important transcription factor NF-κB. With data collected from single cells, we quantitatively characterize the population-averaged kinetic parameters such as the rate constants and apparent activation barrier for NF-κB transport. Our data demonstrate that NF-κB nucleocytoplasmic transport fits first-order kinetics very well and is a fairly reversible process governed by equilibrium thermodynamics.

Targeted nanoparticles enhanced flow electroporation of antisense oligonucleotides in leukemia cells

Liposome nanoparticles (LNs) with a targeting ligand were used in a semi-continuous flow electroporation (SFE) device to enhance in vitro delivery of exogenous oligonucleotides (ODN). Nanoparticles comprising transferrin-targeted lipoplex encapsulating ODN G3139 were mixed with K562 cells (a chronic myeloid leukemia cell line) and incubated for half an hour to accomplish nanoparticle binding. The mixture was then flowed through a SFE channel where electric pulses were given. Better ODN delivery efficiency was achieved with an increase of ∼24% to the case in combination of non-targeted LNs and SFE, and ∼60% to the case using targeted LNs alone, respectively. The MTS assay results confirmed cell viability greater than 75%.

Integrated electrical concentration and lysis of cells in a microfluidic chip

Lysing cells is an important step in the analysis of intracellular contents. Concentrating cells is often required in order to acquire adequate cells for lysis. This work presents an integrated concentration and lysis of mammalian cells in a constriction microchannel using dc-biased ac electric fields. By adjusting the dc component, the electrokinetic cell motion can be precisely controlled, leading to an easy switch between concentration and lysis of red blood cells in the channel constriction. These two operations are also used in conjunction to demonstrate a continuous concentration and separation of leukemia cells from red blood cells in the same microchannel. The observed cell behaviors agree reasonably with the simulation results.

One-step extraction of subcellular proteins from eukaryotic cells

Conventional biochemical analysis mainly focuses on the expression level of cellular proteins from entire cells. However, it has been increasingly acknowledged that the subcellular location of proteins often carries important information. Analysis of subcellular proteins conventionally requires subcellular fractionation which involves two steps: cell lysis to release proteins and high-speed centrifugation to separate the homogenate. Such approach requires bulky and expensive equipment and is not compatible with processing scarce cell samples of limited volume. In this study, we apply microfluidic flow-through electroporation to breach cell membranes and extract cytosolic proteins selectively in a single step. We demonstrate that this approach allows monitoring the translocation of the transcription factor NF-kappaB from the cytosol to the nucleus without the need of subcellular fractionation. Our technique is compatible with the processing of samples of various sizes and provides a simple and universal tool for bioanalytical analysis and spatial proteomics.

Vortex-assisted DNA delivery

Electroporation is one of the most widely used methods to deliver exogenous DNA payloads into cells, but a major limitation is that only a small fraction of the total membrane surface is permeabilized. Here we show how this barrier can be easily overcome by harnessing hydrodynamic effects associated with Dean flows that occur along curved paths. Under these conditions, cells are subjected to a combination of transverse vortex motion and rotation that enables the entire membrane surface to become uniformly permeabilized. Greatly improved transfection efficiencies are achievable with only a simple modification to the design of existing continuous flow electroporation systems.

Single-cell electroporation

Single-cell electroporation (SCEP) is a relatively new technique that has emerged in the last decade or so for single-cell studies. When a large enough electric field is applied to a single cell, transient nano-pores form in the cell membrane allowing molecules to be transported into and out of the cell. Unlike bulk electroporation, in which a homogenous electric field is applied to a suspension of cells, in SCEP an electric field is created locally near a single cell. Today, single-cell-level studies are at the frontier of biochemical research, and SCEP is a promising tool in such studies. In this review, we discuss pore formation based on theoretical and experimental approaches. Current SCEP techniques using microelectrodes, micropipettes, electrolyte-filled capillaries, and microfabricated devices are all thoroughly discussed for adherent and suspended cells. SCEP has been applied in in-vivo and in-vitro studies for delivery of cell-impermeant molecules such as drugs, DNA, and siRNA, and for morphological observations.

Electroporation based on hydrodynamic focusing of microfluidics with low dc voltage

Microfluidics-based cell electroporation has many advantages in delivering small molecules into cells. In this study, hydrodynamic focusing of fluids with different conductivities has been used for high through-put cell electroporation at low voltage (<3 V) of continuous direct current (dc) power. Simulation results showed that an input voltage of only 1.5 V could generate an electric field intensity of about 1.17 kV cm(-1) across the cell suspension flow in the squeezed area. The electropermeation of yeast cell was observed, showing a permeabilization percentage up to 70%.

Regional electroporation of single cardiac myocytes in a focused electric field

There is now a significant interest in being able to locate single cells within geometrically defined regions of a microfluidic chip and to gain intracellular access through the local electroporation of the cell membrane. This paper describes the microfabrication of electroporation devices which can enable the regional electroporation of adult ventricular myocytes, in order to lower the local electrical resistance of the cell membrane. Initially three different devices, designed to suit the characteristic geometry of the cardiomyocyte, were investigated (all three designs serve to focus the electric field to selected regions of the cell). We demonstrate that one of these three devices revealed the sequence of cellular responses to field strengths of increasing magnitudes, namely, cell contraction, hypercontraction, and lysis. This same device required a reduced threshold voltage for each of these events, including in particular membrane breakdown. We were not only able to show the gradual regional increase in the electric conductivity of the cell membrane but were also able to avoid changes in the local intra- and extracellular pH (by preventing the local generation of protons at the electrode surface, as a consequence of the reduced threshold voltage). The paper provides evidence for new strategies for achieving robust and reproducible regional electroporation, a technique which, in future, may be used for the insertion of large molecular weight molecules (including genes) as well as for on-chip voltage clamping of the primary adult cardiomyocyte.

Microfluidic electroporation of tumor and blood cells: observation of nucleus expansion and implications on selective analysis and purging of circulating tumor cells

Circulating tumor cells (CTCs) refer to cells that detach from a primary tumor, circulate in the blood stream, and may settle down at a secondary site and form metastases. The detection and characterization of CTCs are clinically useful for diagnosis and prognosis purposes. However, there has been very little work on purging CTCs from the blood. In this study, we systematically studied electroporation of tumor and blood cells in the context of selective purging and analysis of CTCs, using M109 and mouse blood cells as models. Electroporation is a simple and effective method for disruption of the cell membrane by applying an external electric field. We applied a microfluidic flow-through electroporation to process cells with various electroporation durations and field intensities. With duration of 100-300 ms, we found that the thresholds for electroporation-induced lysis started at 300-400 V cm(-1) for M109, 400-500 V cm(-1) for white blood cells and 1100-1200 V cm(-1) for red blood cells. Due to the substantial difference, we demonstrated the selective electroporation of tumor cells among blood cells and the scale-up of the flow-through electroporation devices for processing samples of millilitre volumes. Using Coherent Anti-stokes Raman Scattering (CARS) and fluorescence microscopy tools, we observed the dramatic increase in the size of the nucleus of a tumor cell in response to the applied field. We suggest that the nucleus expansion is a newly discovered mechanism responsible for rapid tumor cell death resulted from electroporation.

Semicontinuous flow electroporation chip for high-throughput transfection on mammalian cells

We have recently developed a semicontinuous flow electroporation (SFE) device for in vitro DNA delivery. Cells mixed with plasmid DNA continuously flowed through a serpentine channel, the side walls of which also serving as electrodes. With the use of pWizGFP plasmid and K562 cells as a model system, SFE showed better transgene expression (10-15%) compared to a commercial electroporation system. Quantitative results via MTS assay also revealed a 50% or higher cell viability. Similar observations were also found with pWizGFP transfection to mouse embryonic stem cells. Such improvements were attributed to less gas formation and Joule heating in SFE.

Entrapment and measurement of a biologically functionalized microbead with a microwell electrode

A chip with integrated electrophoretic and electrochemical systems was developed to manipulate either an individual microbead or a cell inside a microwell electrode (MWE) for electrochemical measurement. The optimal MWE geometry (30 microm diameter and 25 microm depth) was designed to accommodate the micro particles according to the simulated results. A chip device was sequentially built from a slide patterned with Pt electrodes, an adhesive tape defined with a flow channel (200 microm in width and 25 microm in height), and an indium tin oxide (ITO) cover. The MWE not only generated an active electrophoretic force to trap the particle but also provided a low flow velocity area (LFVA) to stabilize the trapped bead or cell in a continuous flow. Scanning electrochemical microscopy (SECM) theory was employed to explain the electrochemical behaviors of the MWE. An enhanced current was confirmed as the redox recycling effect on the conductive ITO cover. The catalytic reaction of an individual alkaline phosphatase coated microbead (ALP-bead) was electrochemically detected with the MWE after being trapped. The ALP on the trapped ALP-bead catalyzed the hydrolysis of p-aminophenylphosphate (PAPP) to p-aminophenol (PAP), and then a decaying amperogram (+0.3 V vs. Ag/AgCl) due to a tiny PAP quantity around the MWE was observed.

Microchip capillary electrophoresis

Microchip capillary electrophoresis (MCE) is gaining popularity due to the developments of simple microfabrication methods under nonstringent laboratory conditions. Moreover, the low material and production costs of polymer-based microchips have further stimulated advances in the applications of MCE in various fields, including clinical analysis, drug screening, biomarker identification, and biosensing. In this chapter, a simple and robust protocol for fabrication of microchips for lab-on-chip testing and microchip electrophoresis is described. The microchips are hybrid poly(dimethylsiloxane) (PDMS)/glass microchips, which are produced by a combination of photolithography and micromolding processes. This type of microchip has been used in a wide range of analyses.

Modulating DNA adsorption on silica beads using an electrical switch

We demonstrate active tuning of DNA adsorption on silica beads using an electrical switch in a microfluidic device; we use electrolysis of water to alter pH in a packed bed of silica beads and switch the silica bead surface between being adsorptive and desorptive for DNA molecules.

Microfluidic electroporation for selective release of intracellular molecules at the single-cell level

Analysis of intracellular materials at the single-cell level presents opportunities for probing the heterogeneity of a cell population. Lysis by electroporation has been gaining popularity as a rapid method for disruption of the cell membrane and release of intracellular contents. In this report, we selectively released specific intracellular molecules for interrogation at the single-cell level by tuning the parameters of electroporation. We examined the release of a small molecule, calcein (MW approximately 600), and a 72-kDa protein kinase, Syk, tagged by enhanced green fluorescent protein (EGFP) from chicken B cells during electroporation at the single-cell level. We studied the effects of the field intensity and the field duration on the release of the two molecules. We found that calcein in general was released at lower field intensities and shorter durations than did SykEGFP. By tuning the electrical parameters, we were able to deplete calcein from the cells before SykEGFP started to release. This approach potentially provides a high-throughput alternative for probing different intracellular molecules at the single-cell level compared to chemical cytometry by eliminating complete disruption of the cell membrane.

Chemical cytometry on microfluidic chips

Chemical cytometry, referring to the analysis of the chemical contents in individual cells, has been in intensive study since Kennedy's first work that was published in Science. The early researches relied on fine-tip capillaries to capture the cells and do the analyses, which were lab- and time-intensive and required high skills of operation. The emergence of microfluidics has greatly spurred this research field and a great number of research papers have been published in the last decades. Highly integrated microfluidic chips have been developed to capture multiple single cells, lyse them, perform chemical reactions in enclosed microchambers, separate contents by CE and detect chemical species in individual cells. This review focuses on the development of relevant components and their integration for on-chip chemical cytometry.

Microfluidic electroporation for delivery of small molecules and genes into cells using a common DC power supply

Electroporation is an efficient method of introducing foreign impermeant molecules such as drugs and genes into cells. Conventional electroporation has been based on the application of short electrical pulses (electropulsation). Electropulsation requires specialized equipment and cannot be integrated easily with techniques such as electrophoresis which is based on constant voltage. Here we demonstrate the delivery of small molecules and genes into cells, using a microfluidic electroporation technique based on constant direct current (DC) voltage that we developed earlier. We demonstrate the delivery of two molecules into Chinese hamster ovary (CHO-K1) cells: a membrane impermeable nucleic acid dye (SYTOX Green) and a plasmid vector carrying the gene for green fluorescent protein (pEGFP-C1). Our devices can exert field variations to flowing cells that are analogous to the application of single or multiple pulses by having different geometries. We investigate the effects of the electrical parameters and different geometries of the device on the transfection efficiency and cell viability. Our technique provides a simple solution to electroporation-based drug and gene delivery by eliminating the need for a pulse generator. We envision that these simple microscale electroporation devices will have the potential to work in parallel on a microchip platform and such technology will allow high-throughput functional screening of drugs and genes.

Microfluidic delivery of small molecules into mammalian cells based on hydrodynamic focusing

Microfluidics-based cell assays offer high levels of automation and integration, and allow multiple assays to be run in parallel, based on reduced sample volumes. These characteristics make them attractive for studies associated with drug discovery. Controlled delivery of drug molecules or other exogenous materials into cells is a critical issue that needs to be addressed before microfluidics can serve as a viable platform for drug screening and studies. In this study, we report the application of hydrodynamic focusing for controlled delivery of small molecules into cells immobilized on the substrate of a microfluidic device. We delivered calcein AM which was permeant to the cell membrane into cells, and monitored its enzymatic conversion into fluorescent calcein during and after the delivery. Different ratios of the sample flow to the side flow were tested to determine how the conditions of hydrodynamic focusing affected the delivery. A 3D numerical model was developed to help understand the fluid flow, molecular diffusion due to hydrodynamic focusing in the microfluidic channel. The results from the simulation indicated that the calcein AM concentration on the outer surface of a cell was determined by the conditions of hydrodynamic focusing. By comparing the results from the simulation with those from the experiment, we found that the calcein AM concentration on the cell outer surface correlated very well with the amount of the molecules delivered into the cell. This suggests that hydrodynamic focusing provides an effective way for potentially quantitative delivery of exogenous molecules into cells at the single cell or subcellular level. We expect that our technique will pave the way to high-throughput drug screening and delivery on a microfluidic platform.

Detection of kinase translocation using microfluidic electroporative flow cytometry

Directed localization of kinases within cells is important for their activation and involvement in signal transduction. Detection of these events has been largely carried out based on imaging of a low number of cells and subcellular fractionation/Western blotting. These conventional techniques either lack the high throughput desired for probing an entire cell population or provide only the average behaviors of cell populations without information from single cells. Here we demonstrate a new tool, referred to as microfluidic electroporative flow cytometry, to detect the translocation of an EGFP-tagged tyrosine kinase, Syk, to the plasma membrane in B cells at the level of the cell population. We combine electroporation with flow cytometry and observe the release of intracellular kinase out of the cells during electroporation. We found that the release of the kinase was strongly influenced by its subcellular localization. Cells stimulated through the antigen receptor have a fraction of the kinase at the plasma membrane and retain more kinase after electroporation than do cells without stimulation and translocation. We are able to differentiate a cell population with translocation from one without it with the information collected from individual cells of the entire population. This technique potentially allows detection of protein translocation at the single-cell level. Due to the frequent involvement of kinase translocations in disease processes such as oncogenesis, our approach will have utility for kinase-related drug discovery and tumor diagnosis and staging.

High-throughput and real-time study of single cell electroporation using microfluidics: effects of medium osmolarity

Electroporation has been widely accepted as an important tool for the delivery of exogenous molecules into cells. Previous mechanistic studies have been carried out by observing either the average behavior from a large population of cells or the response from a small number of single cells. In this study, we demonstrated a novel microfluidic method with high throughput (up to 30 Hz) for real-time studies of single cell electroporation events. Electroporation occurred when cells flowed through a section of a microfluidic channel defined by special geometry. A CCD camera was used to monitor the response of cells starting from the onset of the electroporation. We studied the swelling of Chinese hamster ovary cells and the rupture of cell membrane during electroporation using this technique. We applied buffers with different osmolarities to investigate the effects of medium osmolarity, based on results from a population of single cells. We were able to establish the distributions of the rates of swelling and membrane rupture in the cell population. We also explored establishing the correlation between the property (the cell diameter) and the behavior (the swelling rate) of single cells. Our results indicated that the processes of swelling and rupture occurred more rapidly in the hypotonic or hypertonic buffers than in the isotonic buffer. Statistical analysis did not reveal strong linear correlation between the cell size and the swelling rate. These proof-of-concept studies reveal the potential of applying microfluidics to study electroporation of a cell population at single cell level in real time with high throughput. The limitations associated with this approach were also addressed.

Microfluidic chemical cytometry based on modulation of local field strength

A simple microfluidic device was demonstrated to analyze intracellular contents from single cells with high throughput based on having different field strengths in geometrically defined sections of a microchannel for electrical lysis and electrophoresis.