Prospects of an Electroactive Carbon Nanotube Membrane toward Environmental Applications

Carbon nanotube filter functionalized with MIL-101(Fe) for enhanced flow-through electro-Fenton

Herein, an electrochemical carbon nanotubes (CNT) filter modified with MIL-101(Fe) has been designed for the electro-Fenton applications by serving as a functional flow-through electrode. Under an electric field, the hybrid filter enabled the in situ generation of H₂O₂via the two-electron oxygen reduction reaction, which promoted the production of HO by the accelerated Fe²⁺/Fe³⁺ cycling of MIL-101(Fe). It was observed that 93.2 ± 1.2% tetracycline and 69.0 ± 0.8% total organic carbon (TOC) were removed in 2 h under the optimized conditions. The electron paramagnetic resonance (EPR) analysis and radical scavenging experiments revealed that HO predominated the tetracycline degradation. As compared to the batch reactor, the performance of the proposed system was improved by 5.6 times owing to the convection-enhanced mass transport. The plausible working mechanism and degradation pathway were also subsequently proposed. The findings reported in this study provide a promising insight for the environmental remediation by integrating nanotechnology and Fenton chemistry.

Synergistic oxidation-filtration process of electroactive peroxydisulfate with a cathodic composite CNT-PPy/PVDF ultrafiltration membrane

Ultrafiltration is an advanced water treatment process which performs poorly in the removal of small molecule organic pollutants, and is susceptible to irreversible membrane fouling. In this study, a new carbon nanotube cross-linked polypyrrole composite ultrafiltration membrane (CNT-PPy/PVDF) was fabricated, and exhibited excellent conductivity, hydrophilicity, and permeability in a novel electro-filtration activated peroxydisulfate (PDS) system (EFAP) for cathodic electrochemical activation of PDS. The EFAP showed satisfactory performance in removal of series of small molecule organic pollutants (i.e., carbamazepine, sulfamethoxazole, phenol, diclofenac.) and stable removal ratio (remaining above 90% after 20 operating cycles). Further study proved the electric field could effectively protect the cathodic CNT-PPy/PVDF membrane from oxidative damage through continual free electrons injection. Besides, the EFAP achieved up to 95% flux recovery and 80% reduction of irreversible membrane fouling (bovine serum albumin as the model foulant). Moreover, experiments confirmed that the in situ generated ^•OH, SO₄^•-, and ¹O₂ were the main reactive oxygen species contributing to small organics removal, while the irreversible membrane fouling mitigation was mainly due to the electrical repulsion, SO₄^•- and ^•OH, rather than ¹O₂. This new type of EFAP may provide a promising and sustainable approach in organic emerging contaminants control in water treatment.

Peroxymonosulfate activation by Fe3O4-MnO2/CNT nanohybrid electroactive filter towards ultrafast micropollutants decontamination: Performance and mechanism

Electrocatalytic peroxymonosulfate (PMS) activation is a promising advanced oxidation process for the degradation of micropollutants. Herein, we developed an electroactive carbon nanotube (CNT) filter functionalized with Fe₃O₄-MnO₂ hybrid (Fe₃O₄-MnO₂/CNT) to activate PMS towards ultrafast degradation of sulfamethoxazole (SMX). SMX was completely degraded via a single-pass through the nanohybrid filter (τ < 2 s). The ultrafast degradation kinetics were maintained across a wide pH range (from 3.0 to 8.0), in complicated matrices (e.g., tap water, lake water, WWTP effluent and pharmaceutical wastewater), and for the degradation of various persistent micropollutants. Compared with a conventional batch reactor, the flow-through operation provides an 9.2-fold higher SMX degradation kinetics by virtue of the convection-enhanced mass transport (1.47 vs. 0.16 min^-1). The efficient redox cycle of Fe²⁺/Fe³⁺ and Mn²⁺/Mn⁴⁺ facilitate the PMS activation to generate SO₄^•- under electric field. Meanwhile, the ketonic groups on the CNT provide active sites for the generation of ¹O₂. Both experimental and theoretical results revealed the superior activity of nanohybrid filter associated with the synergistic effects among Fe, Mn, CNT and electric field. Therefore, the electrocatalytic filter based PMS activation system provides a green strategy for the remediation of micropollutants in a sustainable manner.

Membrane Distillation Hybrid Peroxydisulfate Activation toward Mitigating the Membrane Wetting by Sodium Dodecyl Sulfate

The fouling/wetting of hydrophobic membrane caused by organic substances with low-surface energy substantially limits the development of the membrane distillation (MD) process. The sulfate radical (SO4 ·−)-based advanced oxidation process (AOP) has been a promising technology to degrade organics in wastewater treatment, and peroxydisulfate (PDS) could be efficiently activated by heat. Thus, a hybrid process of MD-AOP via PDS activated by a hot feed was hypothesized to mitigate membrane fouling/wetting. Experiments dealing with sodium dodecyl sulfate (SDS) containing a salty solution via two commercial membranes (PVDF and PTFE) were performed, and varying membrane wetting extents in the coupling process were discussed at different PDS concentrations and feed temperatures. Our results demonstrated permeate flux decline and a rise in conductivity due to membrane wetting by SDS, which was efficiently alleviated in the hybrid process rather than the standalone MD process. Moreover, such a mitigation was enhanced by a higher PDS concentration up to 5 mM and higher feed temperature. In addition, qualitative characterization on membrane coupons wetted by SDS was successfully performed using electrochemical impedance spectroscopy (EIS). The EIS results implied both types of hydrophobic membranes were protected from losing their hydrophobicity in the presence of PDS activation, agreeing with our initial hypothesis. This work could provide insight into future fouling/wetting control strategies for hydrophobic membranes and facilitate the development of an MD process.

Carbon Nanomaterials (CNMs) and Enzymes: From Nanozymes to CNM-Enzyme Conjugates and Biodegradation

Carbon nanomaterials (CNMs) and enzymes differ significantly in terms of their physico-chemical properties-their handling and characterization require very different specialized skills. Therefore, their combination is not trivial. Numerous studies exist at the interface between these two components-especially in the area of sensing-but also involving biofuel cells, biocatalysis, and even biomedical applications including innovative therapeutic approaches and theranostics. Finally, enzymes that are capable of biodegrading CNMs have been identified, and they may play an important role in controlling the environmental fate of these structures after their use. CNMs' widespread use has created more and more opportunities for their entry into the environment, and thus it becomes increasingly important to understand how to biodegrade them. In this concise review, we will cover the progress made in the last five years on this exciting topic, focusing on the applications, and concluding with future perspectives on research combining carbon nanomaterials and enzymes.

Effective stabilization of atomic hydrogen by Pd nanoparticles for rapid hexavalent chromium reduction and synchronous bisphenol A oxidation during the photoelectrocatalytic process

Atomic hydrogen (H*) plays a vital role in the synchronous redox of metallic ions and organic molecules. However, H* is extremely unstable as it is easily converted to hydrogen. Herein, we designed a novel strategy for the effective stabilization of H* to enhance its utility. The synthesized Pd nanoparticles grown on the defective MoS₂ (DMS) of TiO₂ nanowire arrays (TNA) (TNA/DMS/Pd) photocathode exhibited rapid Cr(VI) reduction (~95% in 10 min) and bisphenol A (BPA) oxidation (~97% in 30 min), with the kinetic constants almost 24- and 6-fold higher than those of the TNA photocathode, respectively. This superior performances could be attributed to: (i) the generated interface heterojunctions between TNA and DMS boosted the separation efficiencies of photogenerated electrons, thereby supplying abundant valance electrons to lower the overpotential to create a suitable microenvironment for H* generation; (ii) the stabilization of H* by Pd nanoparticles resulted in a significant increase in the yield of hydroxyl radical (•OH). This research provides a new strategy for the effective utilization of H* toward rapid reduction of heavy metals and synchronous oxidation of the refractory organics.

Ultrasound-assisted electrochemical treatment of cosmetic industry wastewater: Mechanistic and detoxification analysis

This study aims to investigate the mineralization of cosmetics producing industrial wastewater (CW) using sono-electrochemical (US-EC) treatments. The influence of operating parameters such as current density (j), electrolyte (Na₂SO₄) concentration (m), initial pH (pH_o), and ultrasonic power was investigated using Ti/RuO₂ dimensionally stable electrodes. The results demonstrated 80.9% chemical oxygen demand (COD) removal efficiency, 433.5 kWh (kg COD removed)^-1 of specific energy consumption at the optimum conditions of P = 100 W, j = 213 A m^-2, pH_o= 7.6 (natural pH), and m = 1.5 g L^-1. With the application of ultrasound, COD removal efficiency increases from 60.2% to 80.9%, with a synergistic effect of 1.1. Kinetics study analysis confirms that mineralization follows the n^th order kinetics model. In the presence of ultrasound, the performance of electrochemical treatment gets enhanced due to higher electron transfer, the enhanced production of ^•OH radicals, and sulfate radicals (SO₄^•-). The pathway for the degradation of the compound was suggested by quadrupole time of flight mass spectroscopy (QToF-MS). The operating cost of the process was also evaluated to establish the applicability of the US-EC process at the industrial scale.

Hierarchical N-doped CNTs grafted onto MOF-derived porous carbon nanomaterials for efficient oxygen reduction

The rational design and preparation of nonprecious metal-based oxygen reduction reaction (ORR) catalysts to facilitate electron and mass transport are of great significance in oxygen-involved energy applications. Herein, a stepwise approach to synthesize a type of hierarchically porous N-doped carbon nanotubes (CNTs) grafted onto zinc-based coordination polymer derived carbon nanomaterials (M-NCNT, M = Fe/Co/Ni) is proposed. At first, an isostructural zinc-based metal-organic framework (MOF) to HKUST-1(Cu) (ZnHKUST-1) is solvothermally prepared, and then under pyrolysis to obtain MOF-derived porous carbon. After the secondary calcination, the in-situ formed N-doped CNTs are efficiently catalyzed by iron group metal-based nanoparticles (Fe/Co/Ni), which are thermally reduced by porous carbon together with additional urea. The synergistic effect between ultrahigh porosity, large surface area, suitable N-doping, high graphitization degree, and ultrafine metal particles prompts M-NCNT series to exhibit satisfactory electrocatalysis in oxygen reduction. Among them, Fe-NCNT owns the optimal ORR activity with high positive onset potential (0.987 V), half-wave potential (0.860 V) and large diffusion-limited current density (4.893 mA cm^-2). Meanwhile, it shows a high current retention of 90.7% after the 24-hour stability, and the obtained Zn-air battery by Fe-NCNT with open-circuit voltage of 1.44 V owns moderate capacity and satisfying stability. The demonstrated method to prepare hierarchically porous N-doped carbon nanomaterials stemmed from MOF precursors unfolds a new route for the facile construction of efficient nanocatalysts for advanced energy applications.

Magnetically assembled electrodes based on Pt, RuO2-IrO2-TiO2 and Sb-SnO2 for electrochemical oxidation of wastewater featured by fluctuant Cl- concentration

Magnetically assembled electrode (MAE) flexibly attracts magnetic particles (auxiliary electrodes, AEs) on a main electrode (ME) by the magnetic force, where the role of ME is always ignored. In this study, Ti/Pt, Ti/RuO₂-IrO₂-TiO₂ and Ti/Sb-SnO₂ were selected as the ME for comparison in treating synthetic wastewater (acid red G or phenol) with variable Cl^- content. The effects of ME type, loading amount of Fe₃O₄/Sb-SnO₂ AEs, and Cl^- concentration were investigated, followed by varied electrochemical characterizations. Results show that AEs played a vital role in electrode activity and selectivity, and MEs also exerted an unignorable influence on the performance of the MAEs. Among the three MEs, Ti/RuO₂-IrO₂-TiO₂ has the best OER/CER ability, activating more extra active sites with same AEs loading amount, leading to higher organics degradation efficiency under chlorine-free condition. However, this MAE is featured by the noticeable accumulation of intermediate products under chlorine-free condition even if 0.3 g·cm^-2 of AEs are loaded. All electrodes' performances were enhanced in the presence of Cl^-. With high concentration chloride (0.5 M NaCl), the accumulation of intermediate products was reduced significantly, especially on Ti/RuO₂-IrO₂-TiO₂ based MAE, and no chlorinated compound was identified. Finally, the structure-activity relationships of these MAEs were proposed.

Crosslinked poly(ionic liquid)s as selective receptors for Cr(VI) - Counter anion effect and application in treating drinking water and tannery effluents

A series of crosslinked poly(ionic liquid)s (C-PILs), with five different counter anions, were synthesised and investigated for their Cr(VI) binding properties. C-PIL with chloride as the counter anion (C-PIL-Cl) showed the highest sorption capacity (2.96 ± 0.03 mmol/g), while bis(trifluoromethanesulfonyl)imide led to minimum uptake. The chromium binding properties of C-PIL-Cl were investigated in detail, which revealed remarkable Cr(VI) selectivity against other anions. It could reduce the Cr(VI) concentration from 980 ppb to 28 ppb in a typical drinking water sample, which is below the WHO prescribed acceptable limit. The polymer could also remove about 90% of Cr(VI) from synthetic tannery effluent. SEM-EDX studies clearly revealed the chromium uptake and regeneration of the chromium sorbed polymer to be through anion exchange at the binding sites. Quantitative elution of the bound chromium from C-PIL-Cl was feasible with 1 M NaOH and 1 M NaCl solution. While the polymer regenerated with NaCl showed sorption properties similar to the virgin polymer, regeneration with NaOH led to reduced capacity. Microscopic investigations showed no effect on polymer morphology during desorption. The sorption kinetics followed pseudo second order and showed poor fit with pseudo first order model.

Fabrication of a permeable SnO2-Sb reactive anodic filter for high-efficiency electrochemical oxidation of antibiotics in wastewater

Electrochemical oxidation (ECO) is an appealing technology for treating emerging organic pollutants in wastewater. However, the conventional flow-by ECO process is expensive with a low energy efficiency owing to the limitations of mass transport of contaminants to the limited surface area of the anode. In this study, a novel freestanding porous and permeable SnO₂-Sb anode was fabricated by one-step sintering using micrometer-sized (NH₄)₂CO₃ grains as the pore-forming agents. This permeable SnO₂-Sb anode without Ti substrate functioned as a reactive anodic filter (RAF) in an ECO cell to treat wastewater containing ciprofloxacin (CIP). Forcing the wastewater through the porous RAF depth-wise improved the mass transport and vastly enlarged the electroactive surface area. Compared with the conventional flow-by configuration, the flow-through RAF exhibited a 12-fold increase in the mass transfer rate constant (60.7 × 10^-6 m s^-1) and a 5-fold increase in the CIP degradation rate constant (0.077 min^-1). At a cell potential of 4.0 V, more than 92% of the CIP was degraded in a single-pass operation at a filtration flux of 54 L m^-2 h^-1 and a short retention time of 1.7 min through the RAF. The robustness and stability of the RAF were demonstrated by its remarkable CIP degradation efficacy of 99% during 200 h of operation. The mechanism of CIP degradation was examined using probe molecules and density functional theory calculations and found to be a combined effect of direct electron transfer and oxidation by generated radicals (OH and SO₄^-). The great potential of RAF in flow-through ECO was further validated by its effective removal (>92%) of various organic pollutants in actual municipal wastewater at a low energy consumption of 0.33 kWh m^-3. The RAF-based ECO process thus provides an advanced environmental technology for the oxidation of toxic and recalcitrant organic pollutants in wastewater treatment.

Phenotypic responses and potential genetic mechanism of lepidopteran insects under exposure to graphene oxide

Clarification of the interactions between engineered nanomaterials and multiple generations of insects is crucial to understanding the impact of nanotechnology on the environment and agriculture, particularly in toxicity management, pest management and genetic engineering. To date, there has been very limited information about nanoparticle-insect interactions at the genetic and proteomic levels. Here, we examined the phenotypic responses and potential mechanism of a lepidopteran insect Asian corn borer (ACB) to graphene oxide (GO). It was demonstrated that GO could significantly promote the growth of ACB. The transcriptomic and proteomic results consistently verified that GO might activate trypsin-like serine protease, glutathione S-transferase, heat shock protein and glycosyltransferase to further influence the development of ACB. RNA interference results indicated that the trypsin gene was one of the critical genes to accelerate the growth of ACB fed with GO diet. Moreover, physiological analysis showed potential alterations of the expression levels of genes and proteins, and more cholesterol (CE), triacylglycerides (TG) and lipids were accumulated in GO-exposed ACB. Our findings may help to reveal the phenotypic, physiological and genetic responses of insects under exposure to nanomaterials and to assess the environmental risks of other nanomaterials.

Absolute and Fast Removal of Viruses and Bacteria from Water by Spraying-Assembled Carbon-Nanotube Membranes

Membrane separation is able to efficiently remove pathogens like bacteria and viruses from water based on size exclusion. However, absolute and fast removal of pathogens requires highly permeable but selective membranes. Herein, we report the preparation of such advanced membranes using carbon nanotubes (CNTs) as one-dimensional building blocks. We first disperse CNTs with the help of an amphiphilic block copolymer, poly(2-dimethylaminoethyl methacrylate)-block-polystyrene (PDMAEMA-b-PS, abbreviated as BCP). The PS blocks adsorb on the surface of CNTs via the π-π interaction, while the PDMAEMA blocks are solvated, thus forming homogeneous and stable CNT dispersions. We then spray the CNT dispersions on porous substrates, producing composite membranes with assembled CNT layers as the selective layers. We demonstrate that the optimized membrane shows 100% rejection to phage viruses and bacteria (Escherichia coli) while giving a water permeance up to ∼3300 L m^-2 h^-1 bar^-1. The performance of the resultant BCP/CNT membrane outperforms that of state-of-the-art membranes and commercial membranes. The BCP/CNT membrane can be used for multiple runs and regenerated by water rinsing. Membrane modules assembled from large-area membrane sheets sustain the capability of absolute and fast removal of viruses and bacteria.

Making Waves: Zero Liquid Discharge for Sustainable Industrial Effluent Management

Zero liquid discharge (ZLD) aims to minimize liquid waste generation whilst extend water supply, and this industrial strategy has attracted renewed interest worldwide in recent years. In spite of the advantages such as reduced water pollution and resource recovery from waste, there are several challenges to overcome prior to wider applications of ZLD. This study will examine the main processes involved in ZLD, and analyze their limitations and potential solutions. This study also differs from past reviews on the subject, by providing a summary of the challenges that were found light of in prevalent studies. To fulfill the sustainable vision, future research that can bridge the gap between the theoretical study and industrial practice is highlighted.

Defect-Rich Hierarchical Porous UiO-66(Zr) for Tunable Phosphate Removal

The introduction of defects into hierarchical porous metal-organic frameworks (HP-MOFs) is of vital significance to boost their adsorption performance. Herein, an advanced template-assisted strategy has been developed to fine-tune the phosphate adsorption performance of HP-MOFs by dictating the type and number of defects in HP-UiO-66(Zr). To achieve this, monocarboxylic acids of varying chain lengths have been employed as template molecules to fabricate an array of defect-rich HP-UiO-66(Zr) derivatives following removal of the template. The as-prepared HP-UiO-66(Zr) exhibits a higher sorption capacity and faster sorption rate compared to the pristine UiO-66(Zr). Particularly, the octanoic acid-modulated UiO-66(Zr) exhibits a high adsorption capacity of 186.6 mg P/g and an intraparticle diffusion rate of 6.19 mg/g·min^0.5, which are 4.8 times and 1.9 times higher than those of pristine UiO-66(Zr), respectively. The results reveal that defect sites play a critical role in boosting the phosphate uptake performance, which is further confirmed by various advanced characterizations. Density functional theory (DFT) calculations reveal the important role of defects in not only providing additional sorption sites but also reducing the sorption energy between HP-UiO-66(Zr) and phosphate. In addition, the hierarchical pores in HP-UiO-66(Zr) can accelerate the phosphate diffusion toward the active sorption sites. This work presents a promising route to tailor the adsorption performance of MOF-based adsorbents via defect engineering.

Highly efficient metal-free electro-Fenton degradation of organic contaminants on a bifunctional catalyst

Heterogeneous electro-Fenton (e-Fenton) is a promising technology for the treatment of persistent organic pollutants, in which H₂O₂ is produced via 2e^- oxygen reduction and is simultaneously activated into •OH by the iron-based catalyst. This system often suffers from the inevitable metal dissolution in the acidic or even neutral environment, leading to poor pH adaptation and low stability. In this work, we designed a metal-free e-Fenton system, using O-doped carbon nanotubes (OCNTs) as the bifunctional metal-free cathode for the degradation of organic pollutants. The system showed the excellent e-Fenton performance under neutral conditions with the phenol degradation kinetic constant of 0.071 min^-1, and the corresponding TOC removal was 76.6% within 300 min. It also exhibited excellent performance for actual coking wastewater treatment with the specific energy consumption of 7.4 kW h kg^-1 COD^-1, which was lower than that reported heterogeneous electro-Fenton system (9.2-14.4 kW h kg^-1 COD^-1). The in-situ metal-free e-Fenton system could be regarded as a promising strategy for actual wastewater treatment.

Antimony, a pollutant of emerging concern: A review on industrial sources and remediation technologies

Technologies for remediation of industrial effluents and natural sources contaminated with antimony - a pollutant of emerging concern - are just emerging. The complex speciation of antimony makes it challenging to devise effective remediation technologies. Antimony is used in several industrial applications and comes into the environment majorly through human induced activities such as antimony mining and other activities involving the use of various products containing antimony. Many researchers are working on the important task of developing methodologies to stop or limit the release of antimony into the environment through these activities. Antimony removal is an important requirement in nuclear industry as well due to the formation of its radioactive isotopes during power plant operations. Thus, better antimony remediation or removal techniques can have wider applications ranging from domestic water treatment and industrial effluent remediation to safe isolation of radioactive waste in the nuclear industry. Proper understanding of the problem is very important in designing the source appropriate remediation technique. Treatment methodologies needed for antimony effluents from antimony mining and smelting industries are different from antimony decontamination in nuclear reactors. The problem of antimony leaching from a polyethylene terephthalate bottle is very much different from the leaching of antimony from mining wastes. Each process necessitates custom-made treatment methodologies by taking into account various factors including the speciation and concentration. The current review is focused on this aspect. The review attempts to bring out a clear understanding on various industry specific sources of antimony pollution and the available antimony removal/remediation technologies.

Catalytic membrane-based oxidation-filtration systems for organic wastewater purification: A review

Catalytic membranes can simultaneously realize physical separation and chemical oxidation in one integrated system, which is the frontier technology for effective removal of organic containments in wastewater treatment. The catalytic membrane coupled with advanced oxidation processes (AOPs) not only significantly enhances the pollutant removal efficiency but also inhibits the fouling of the membrane via self-cleaning. In this review, the preparation approaches of catalytic membranes including blending, surface coating, and bottom-up synthesis are comprehensively summarized. The different integrated catalytic membrane systems coupled with photocatalysis, Fenton oxidation, persulfate activations, ozonation and electrocatalytic oxidation are discussed in terms of mechanisms and performance. Besides, the principles, influencing factors, advantages and issues of the different catalytic membrane/oxidation systems are outlined comparatively. Finally, the future challenges, and research directions are suggested, which is conducive to the design and development of catalytic membrane-oxidation systems for practical remediation of organic containing wastewater.

Emerging Energy Harvesting Materials and Devices for Self-Powered Water Disinfection

Contaminated drinking water is one of the main pathogen transmission pathways making waterborne illnesses such as diarrheal diseases and gastroenteritis a huge threat to public health, especially in the areas where sanitation facilities and gird power are inadequate such as rural and disaster hit areas. Self-powered water disinfection systems are a promising solution in these cases. In this review paper, the authors provide an overview of the new and emerging methods of applying energy harvesting materials and devices as a source of power for water disinfection systems microbial disinfection in water by harnessing ambient forms of energy such as mechanical motion, light, and heat into electricity. The authors begin with a brief introduction of the different energy harvesting technologies commonly applied in water disinfection; triboelectric, piezoelectric, pyroelectric, and photovoltaic effects. Various microbial disinfection mechanisms and types of device construction are summarized. Then, a detailed discussion of the energy harvester-driven water disinfection process is provided. Finally, challenges and perspectives regarding the future development of self-powered water disinfection are described.

Simultaneous decontamination of arsenite and antimonite using an electrochemical CNT filter functionalized with nanoscale goethite

The co-presence of arsenic (As) and antimony (Sb) in water bodies has been commonly reported. The toxicity of As and Sb varies with different speciation. Herein, we designed a dual-functional electrochemical filter toward "one-step" detoxification and sequestration of highly toxic As(III) and Sb(III). The key to this technology is a functional anodic filter consists of nanoscale goethite and carbon nanotubes (CNT). Results showed that 97.9% As(III) and 91.9% Sb(III) transformation and 86.4% As_total and 70.1% Sb_total removal efficiency can be obtained over 2 h continuous filtration under optimized conditions. The As_total removal kinetics and efficiency enhanced with flow rate and applied voltage (e.g., the As_total removal efficiency increased from 62.9% at 0 V to 86.4% at 2.5 V). This enhancement in kinetics and efficiency can be explained by the synergistic effects of the flow-through design, plentiful exposed sorption sites, electrochemical reactivity, and nanoscale goethite. Moreover, the proposed technology works effectively across a wide pH range. Only negligible inhibition was observed in the presence of nitrate, chloride, and carbonate. Exhausted hybrid filters can be effectively regenerated by using chemical wash with NaOH solution. This study not only revealed the different adsorption behaviors of As(III) and Sb(III) on the hybrid filters, but also provided new insights into rational design of continuous-flow filters toward simultaneous decontamination of As(III) and Sb(III).

A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

In this study, we designed an integrated electrochemical filtration system for catalytic activation of peroxymonosulfate (PMS) and degradation of aqueous microcontaminants. Composites of carbon nanotube (CNT) and nanoscale zero valence copper (nZVC) were developed to serve as high-performance catalysts, electrode and filtration media simultaneously. We observed both radical and nonradical reaction pathways, which collectively contributed to the degradation of model pollutants. Congo red was completely removed via a single-pass through the nZVCCNT filter (τ <2 s) at neutral pH. The rapid kinetics of Congo red degradation were maintained across a wide pH range (from 3.0-7.0), in complicated matrixes (e.g., tap water and lake water), and for the degradation of a wide array of persistent organic contaminants. The superior activity of nZVCCNT stems from the boosted redox cycles of Cu²⁺/Cu⁺ in the presence of an external electric field. The flow-through design remarkably outperformed the conventional batch system due to the convection-enhanced mass transport. Mechanism studies suggested that the carbonyl group and electrophilic oxygen of CNT served as electron donor and electron acceptor, respectively, to activate PMS to generate •OH and ¹O₂via one-electron transport. The electron-deficient Cu atoms are prone to react with PMS via surface hydroxyl group to produce reactive intermediates (Cu²⁺-O-O-SO₃^-), and then ¹O₂ will be generated by breaking the coordination bond of the metastable intermediate. The study will provide a green strategy for the remediation of organic pollution by a highly efficient and integrated system based on catalytic oxidation, electrochemistry, and nano-filtration techniques.

Photocatalytic activity of SnO2/Fe3O4 nanocomposites and the toxicity assessment of Vigna radiata, Artemia salina and Danio rerio in the photodegraded solution

The study was undertaken to design SnO₂/Fe₃O₄ nanocomposite by sonochemical method and to assess the photodegradation of organic dye. Textural, composition and structural features of the bare SnO₂ and SnO₂/Fe₃O₄ samples were characterized using scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The X-ray diffraction of as-synthesized SnO₂/Fe₃O₄ nanocomposites confirms the presence of tetragonal and cubic structure. The results disclose that the incorporation of Fe₃O₄ in SnO₂ decrease the crystallite size and increase the surface area compared with bare SnO₂ nanoparticle. The as-prepared photocatalyst shows higher efficiency than the bare SnO₂ under sunlight irradiation. Vigna radiata seeds (VR), Artemia salina (AS) and Zebra fish (Danio rerio (DR) were used to check the toxicity level of the treated and untreated Rhodamine B (RhB) dye solution. These models displayed good consistency for examining the harmfulness of the solutions. The results suggests SnO₂/Fe₃O₄ nanocomposite exhibited a good efficacy in the dye wastewater treatment. Further, the degradation efficiency was confirmed by the toxicity examination.

Silicate-Enhanced Heterogeneous Flow-Through Electro-Fenton System Using Iron Oxides under Nanoconfinement

Herein, a silicate-enhanced flow-through electro-Fenton system with a nanoconfined catalyst was rationally designed and demonstrated for the highly efficient, rapid, and selective degradation of antibiotic tetracycline. The key active component of this system is the Fe₂O₃ nanoparticle filled carbon nanotube (Fe₂O₃-in-CNT) filter. Under an electric field, this composite filter enabled in situ H₂O₂ generation, which was converted to reactive oxygen species accompanied by the redox cycling of Fe³⁺/Fe²⁺. The presence of the silicate electrolyte significantly boosted the H₂O₂ yield by preventing the O-O bond dissociation of the adsorbed OOH*. Compared with the surface coated Fe₂O₃ on the CNT (Fe₂O₃-out-CNT) filter, the Fe₂O₃-in-CNT filter demonstrated 1.65 times higher k_L value toward the degradation of the antibiotic tetracycline. Electron paramagnetic resonance and radical quenching tests synergistically verified that the dominant radical species was the ¹O₂ or HO· in the confined Fe₂O₃-in-CNT or unconfined Fe₂O₃-out-CNT system, respectively. The flow-through configuration offered improved tetracycline degradation kinetics, which was 5.1 times higher (at flow rate of 1.5 mL min^-1) than that of a conventional batch reactor. Liquid chromatography-mass spectrometry measurements and theoretical calculations suggested reduced toxicity of fragments of tetracycline formed. This study provides a novel strategy by integrating state-of-the-art material science, Fenton chemistry, and microfiltration technology for environmental remediation.

Single-atom catalysis in advanced oxidation processes for environmental remediation

This review presents the recent advances in synthetic strategies, characterisation, and computations of carbon-based single-atom catalysts, as well as their innovative applications and mechanisms in advanced oxidation technologies.