Mismanagement of Plastic Waste through Open Burning with Emphasis on the Global South: A Systematic Review of Risks to Occupational and Public Health

Health risks of solid waste management practices in rural Ghana: A semi-quantitative approach toward a solid waste safety plan

Inadequate solid waste management (SWM) can lead to environmental contamination and human health risks. The health risks from poor SWM can vary based on specific practices and exposure pathways. Thus, it is necessary to adequately understand the local context. This information, however, is rarely available in low-resource settings, particularly in rural areas. A solid waste safety plan could be helpful in these settings for gathering necessary data to assess and minimize health risks. As a step in developing such a tool, a semi-quantitative health risk analysis of SWM practices in nine Ghanaian rural villages was undertaken. Data on SWM in each village were collected through qualitative field observations and semi-structured interviews with local stakeholders. SWM-related health risks were assessed using the collected data, similar case studies in the scientific literature and dialogue among an assembled team of experts. The analysis identified context-specific practices and exposure pathways that may present the most substantial health risks as well as targeted solutions for mitigation risks. A risk assessment matrix was developed to quantify SWM risks as low, medium, high, or very high based on the likelihood and severity of identified hazards. The highest SWM risks were identified from dumpsites and uncontrolled burying of solid waste. More specifically, a very high or high risk of infectious and vector-borne diseases from SWM in the villages was identified, both in the disposal of solid waste in dumpsites and uncontrolled burying of solid waste. Additionally, a very high or high risk of inhalation, ingestion or dermal contact with contaminants was found in the disposal of solid waste in dumpsites, open burning of waste and reuse of waste from dumpsites as compost. The results demonstrate the potential value of a solid waste safety plan and a parsimonious approach to collect key local data to inform its contents.

Scaling up resource recovery of plastics in the emergent circular economy to prevent plastic pollution: Assessment of risks to health and safety in the Global South

Over the coming decades, a large additional mass of plastic waste will become available for recycling, as efforts increase to reduce plastic pollution and facilitate a circular economy. New infrastructure will need to be developed, yet the processes and systems chosen should not result in adverse effects on human health and the environment. Here, we present a rapid review and critical semi-quantitative assessment of the potential risks posed by eight approaches to recovering value during the resource recovery phase from post-consumer plastic packaging waste collected and separated with the purported intention of recycling. The focus is on the Global South, where there are more chances that high risk processes could be run below standards of safe operation. Results indicate that under non-idealised operational conditions, mechanical reprocessing is the least impactful on the environment and therefore most appropriate for implementation in developing countries. Processes known as 'chemical recycling' are hard to assess due to lack of real-world process data. Given their lack of maturity and potential for risk to human health and the environment (handling of potentially hazardous substances under pressure and heat), it is unlikely they will make a useful addition to the circular economy in the Global South in the near future. Inevitably, increasing circular economy activity will require expansion towards targeting flexible, multi-material and multilayer products, for which mechanical recycling has well-established limitations. Our comparative risk overview indicates major barriers to changing resource recovery mode from the already dominant mechanical recycling mode towards other nascent or energetic recovery approaches.

A temporal assessment of microplastics distribution on the beaches of three remote islands of the Yasawa archipelago, Fiji

This is the first study that investigated the presence, distribution, and composition of microplastics, MPs (1-5 mm) on beaches in the Yasawa Islands, Fiji. A temporal assessment over three years on six beaches was undertaken to investigate different beach traits on MP abundance. Average MP concentration was 4.5 ± 11.1 MPs·m^-2 with significantly higher concentrations were found on east-facing beaches than west (p < 0.001), and higher on the storm line compared to the high tide line (p < 0.001). No difference was found between tourist and local beaches (p = 0.21). These results demonstrate the role of current-driven ocean transport of plastic pollution in this part of The South Pacific. ATR FT-IR analysis showed that across all sites 34 % of MPs were polypropylene (PP), 33 % polystyrene (PS), 25 % polyethylene (PE), and 8 % other polymer types. Further studies are needed to assess the potential impacts of MPs on Fiji's coral reefs and marine life.

Interlinkage Between Persistent Organic Pollutants and Plastic in the Waste Management System of India: An Overview

Improper handling of plastic waste and related chemical pollution has garnered much attention in recent years owing to the associated detrimental impacts on human health and the environment. This article reports an overview of the main interlinkages between persistent organic pollutants (POPs) and plastic in the waste management system of India. Both plastics and POPs share certain common traits such as persistence, resistance to biological degradation, and the ability to get transported over long distances. Throughout the processes of production, consumption, and disposal, plastics interact with and accumulate POPs through several mechanisms and end up co-existing in the environment. Plastic waste can undergo long-range transport through rivers and the oceans, break down into microplastics and get transported through the air, or remain locked in waste dump yards and landfills. Over time, environmental processes lead to the leaching and release of accumulated POPs from these plastic wastes. Plastic recycling in the Indian informal sector including smelting, scrubbing, and shredding of plastic waste, is also a potential major POPs source that demands further investigation. The presence of POPs in plastic waste and their fate in the plastic recycling process have not yet been elucidated. By enhancing our understanding of these processes, this paper may aid policy decisions to combat the release of POPs from different waste types and processes in India.

Phytotoxicity of particulate matter from controlled burning of different plastic waste types

According to careful estimations, open burning of plastic waste affects app. 2 billion people worldwide. While human health risks have become more and more obvious, much less information is available on the phytotoxicity of these emissions. In our study phytotoxicity of particulate matter samples generated during controlled combustion of different plastic waste types such as polyvinyl chloride (PVC), polyurethane (PUR), polypropylene (PP), polystyrene (PS) and polyethylene (PE) was evaluated based on peroxidase levels. While different samples showed different concentration-effect relationship patterns, higher concentration(s) caused decreased peroxidase activities in each sample indicating serious damage.

Divergent Forms of Pyroplastic: Lessons Learned from the M/V X-Press Pearl Ship Fire

In late May 2021, the M/V X-Press Pearl container ship caught fire while anchored 18 km off the coast of Colombo, Sri Lanka and spilled upward of 70 billion pieces of plastic or "nurdles" (∼1680 tons), littering the country's coastline. Exposure to combustion, heat, chemicals, and petroleum products led to an apparent continuum of changes from no obvious effects to pieces consistent with previous reports of melted and burned plastic (pyroplastic) found on beaches. At the middle of this continuum, nurdles were discolored but appeared to retain their prefire morphology, resembling nurdles that had been weathered in the environment. We performed a detailed investigation of the physical and surface properties of discolored nurdles collected on a beach 5 days after the ship caught fire and within 24 h of their arrival onshore. The color was the most striking trait of the plastic: white for nurdles with minimal alteration from the accident, orange for nurdles containing antioxidant degradation products formed by exposure to heat, and gray for partially combusted nurdles. Our color analyses indicate that this fraction of the plastic released from the ship was not a continuum but instead diverged into distinct groups. Fire left the gray nurdles scorched, with entrained particles and pools of melted plastic, and covered in soot, representing partial pyroplastics, a new subtype of pyroplastic. Cross sections showed that the heat- and fire-induced changes were superficial, leaving the surfaces more hydrophilic but the interior relatively untouched. These results provide timely and actionable information to responders to reevaluate cleanup end points, monitor the recurrence of these spilled nurdles, gauge short- and long-term effects of the spilled nurdles to the local ecosystem, and manage the recovery of the spill. These findings underscore partially combusted plastic (pyroplastic) as a type of plastic pollution that has yet to be fully explored despite the frequency at which plastic is burned globally.

Recent advances on the transport of microplastics/nanoplastics in abiotic and biotic compartments

Plastics enter the environment and break up into microplastics (MPs) and even nanoplastics (NPs) by biotic and abiotic weathering. These small particles are widely distributed in the environmental media and extremely mobile and reactive, easily suspending in the air, infiltrating into the soil, and interacting with biota. Current research on MPs/NPs is either in the abiotic or biotic compartments, with little attention paid to the fact that the biosphere as a whole. To better understand the complex and continuous movement of plastics from biological to planetary scales, this review firstly discusses the transport processes and drivers of microplastics in the macroscopic compartment. We then summarize insightfully the uptake pathways of MPs/NPs by different species in the ecological compartment and analyze the internalization mechanisms of NPs in the organism. Finally, we highlight the bioaccumulation potential, biomagnification effects and trophic transfer of MPs/NPs in the food chain. This work is expected to provide a meaningful theoretical body of knowledge for understanding the biogeochemical cycles of plastics.

Cross-Generational Impacts of Diet Shift on Bisphenol Analogue Loads in Indo-Pacific Humpback Dolphins (Sousa chinensis)

Bisphenol analogues (BPs) are ubiquitous pollutants to marine organisms as endocrine disruptive chemicals. However, the residue contamination and the trophic transfer of BPs in the apex predator nearshore dolphins are poorly studied. Here, we measured the concentrations of six BPs, including bisphenol A (BPA), bisphenol AF (BPAF), bisphenol B (BPB), bisphenol F (BPF), bisphenol P (BPP), and bisphenol S (BPS) in the liver of Indo-Pacific humpback dolphin (Sousa chinensis) (n = 75) collected from the Pearl River Estuary during a period with significant dietary changes (2004-2020). BPA and BPAF were the dominant components of the residue ∑BPs in the liver, with a proportion of 80%. Sex, maturity, and stranding location had no significant effects on BP levels. The generalized additive models indicated that BPA levels in juveniles and adults decreased from 2004 to 2013 while increasing from 2013 to 2020. The temporal trend of BPA levels was likely driven by the shift of the dominant diet from Harpadon nehereus to Thryssa spp. The concurrent increase of BPA loads in calves and juveniles and adults over the recent decades suggested that the diet-mediated variations of maternal BPA levels could be redistributed to their offspring.

Plastics in the environment as potential threat to life: an overview

Plastics have become inevitable for human beings in their daily life. Million tons of plastic waste is entering in oceans, soil, freshwater, and sediments. Invasion of plastics in different ecosystems is causing severe problems to inhabitants. Wild animals such as seabirds, fishes, crustaceans, and other invertebrates are mostly effected by plastic entanglements and organic pollutants absorbed and carried by plastics/microplastics. Plastics can also be potentially harmful to human beings and other mammals. Keeping in view the possible harms of plastics, some mitigation strategies must be adopted which may include the use of bioplastics and some natural polymers such as squid-ring teeth protein. This review focuses on the possible sources of intrusion and fate of plastics in different ecosystems, their potential deleterious effects on wildlife, and the measures that can be taken to minimize and avoid the plastic use.

A scoping review protocol on in vivo human plastic exposure and health impacts

BACKGROUND

Global plastic production has increased exponentially since the 1960s, with more than 6300 million metric tons of plastic waste generated to date. Studies have found a range of human health outcomes associated with exposure to plastic chemicals. However, only a fraction of plastic chemicals used have been studied in vivo, and then often in animals, for acute toxicological effects. With many questions still unanswered about how long-term exposure to plastic impacts human health, there is an urgent need to map human in vivo research conducted to date, casting a broad net by searching terms for a comprehensive suite of plastic chemical exposures and the widest range of health domains.

METHODS

This protocol describes a scoping review that will follow the recommended framework outlined in the 2017 Guidance for the Conduct of Joanna Briggs Institute (JBI) Scoping Reviews, to be reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) Checklist. A literature search of primary clinical studies in English from 1960 onwards will be conducted in MEDLINE (Ovid) and EMBASE (Ovid) databases. References eligible for inclusion will be identified through a quality-controlled, multi-level screening process. Extracted data will be presented in diagrammatic and tabular form, with a narrative summary addressing the review questions.

DISCUSSION

This scoping review will comprehensively map the primary research undertaken to date on plastic exposure and human health. Secondary outputs will include extensive databases on plastic chemicals and human health outcomes/impacts.

SYSTEMATIC REVIEW REGISTRATION

Open Science Framework (OSF)-Standard Pre-Data Collection Registration, https://archive.org/details/osf-registrations-gbxps-v1 , https://doi.org/10.17605/OSF.IO/GBXPS.

Transforming the Plastic Production System Presents Opportunities to Tackle the Climate Crisis

Due to the rapid growth in global plastic production, in short-term applications, and negative impacts on natural ecosystems, plastics have received much attention. Additionally, the entire plastic value chain generates a significant amount of GHGs, and plastic use reductions should be considered as interventions addressing the climate crisis. This work investigates the life cycle of plastics in non-durable goods holistically. It identifies interventions to improve the sustainability and circularity of the system of production and analyzes the potential benefit of these interventions as climate change solutions. A baseline global market for plastics is defined and forecast to 2050, to which four interventions are applied: (1) plastic reduction through elimination and reuse; (2) replacement with paper; (3) replacement with recycled feedstock, (4) replacement with bioplastics. The highest potential in GHG emissions reduction lies in plastic reduction, followed by replacement with recycled plastics, paper, and, finally, bioplastics. Together the integrated system can reduce between 9.5 and 14.9 Gt CO2-eq from 2020 to 2050. The environmental and social impact of applying all these interventions in parallel is significant, as plastics are at the intersection of many challenges, including waste production, energy use, ocean pollution, and land disruption from fossil extraction.

Appropriate solid waste management system in Quelimane (Mozambique): study and design of a small-scale center for plastic sorting with wastewater treatment

Appropriate solid waste management (SWM) strategies are necessary to avoid severe environmental and sanitary impacts, especially in low-income countries. Such strategies are most likely to succeed whether implementing actors are supported by scientific research. In this paper, the results of a collaboration between local authorities and researchers are presented and discussed that are the assessment of waste generation in the city of Quelimane (Mozambique), integrating existing and field-collected data and the design of a small-scale center for plastic sorting to complement the SWM system of the city. The center is expected to receive about 0.3–0.4 t/day of plastic waste (5%–7% of the overall amount of plastic waste daily produced in Quelimane). As long-term sustainability represents a typical issue, simplicity of operation was a leading principle in the design of the center; moreover, the design included a treatment plant (WWTP) for generated wastewater, whose management is usually neglected in such interventions. Among others, natural wastewater treatment (constructed wetlands) has been chosen for its affordability. Noteworthy, the so-conceived WWTP appears as a novelty in the scientific literature associated with small-scale plastic sorting plants. The system is designed to treat an average flow of 6 m³/day and consisted of a septic tank followed by a subsurface flow constructed wetland. Overall, the COD (chemical oxygen demand) and TSS (total suspended solids) removal higher than 80% and 90% were estimated, respectively. Based on this work, both the center and the WWTP were successfully realized, which are waiting to become operational. In the authors’ opinion, the implemented procedure could become a reference for broader investigations and surveys.

A comprehensive review of domestic-open waste burning: recent trends, methodology comparison, and factors assessment

Open burning is a waste management practice performed by many people worldwide, especially in developing countries. Lack of detailed data of open burning practices may lead to a misinterpretation during data analysis, especially when estimating global/local emissions and assessing risks. This study presents a comprehensive review of current research trends, methodological assessments, and factors behind open waste burning practices from published literature. This review used systematic methods such as PRISMA 2020 methodology, a bibliometric approach, and qualitative content analysis to determine and assess 84 articles related to open burning. The results show that environmental risks and emission factors related to open burning incidents at the landfill or residential level are preferable topics that will be rising in the years to come. Coupling methods such as a transect-based approach with a questionnaire survey and mobile-static plume sampling to determine the activities and incidents as baseline data for risk assessment will help researchers gain a robust dataset of open burning emission inventory. In addition, it was found that environmental knowledge and awareness levels influence open burning practices, thereby opening up opportunities for future research.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10163-022-01430-9.

Activity and emission inventory of open waste burning at the household level in developing countries: a case study of Semarang City

In this study, total burned household waste and the potential emissions released from waste burning in Semarang City, Indonesia, were estimated. Waste piles were monitored using the transect walk survey method in 16 sub-districts of Semarang City. Carbon monoxide (CO), carbon dioxide (CO₂), hydrocarbon (HC), nitrous oxide (NO_x), and total particulate matter (TPM) were directly analyzed through a simulation of waste combustion. The potential emissions from other pollutants were predicted by multiplying the weight of the burned waste by the emission factors available in the literature. The estimated waste burned in Semarang City in 2020-2021 was 58.8 Gg/year, or approximately 9.70% of the total waste generated in Semarang City. This estimation exceeds local government estimates of 2020 by two-fold. Peri-urban areas (both inner and outer) were identified as the most significant contributors to waste burning. Further, garden waste was the most burned waste (73.61%), followed by plastic waste (17.45%). Other wastes, including paper, leather, textile, rubber, and food, were also burned. Overall, a decrease in the activity of waste burning is an important step for reducing the potential of air pollution and climate change.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10163-022-01371-3.

Impacts of Plastic Pollution on Ecosystem Services, Sustainable Development Goals, and Need to Focus on Circular Economy and Policy Interventions

Plastic pollution is ubiquitous in terrestrial and aquatic ecosystems. Plastic waste exposed to the environment creates problems and is of significant concern for all life forms. Plastic production and accumulation in the natural environment are occurring at an unprecedented rate due to indiscriminate use, inadequate recycling, and deposits in landfills. In 2019, the global production of plastic was at 370 million tons, with only 9% of it being recycled, 12% being incinerated, and the remaining left in the environment or landfills. The leakage of plastic wastes into terrestrial and aquatic ecosystems is occurring at an unprecedented rate. The management of plastic waste is a challenging problem for researchers, policymakers, citizens, and other stakeholders. Therefore, here, we summarize the current understanding and concerns of plastics pollution (microplastics or nanoplastics) on natural ecosystems. The overall goal of this review is to provide background assessment on the adverse effects of plastic pollution on natural ecosystems; interlink the management of plastic pollution with sustainable development goals; address the policy initiatives under transdisciplinary approaches through life cycle assessment, circular economy, and sustainability; identify the knowledge gaps; and provide current policy recommendations. Plastic waste management through community involvement and socio-economic inputs in different countries are presented and discussed. Plastic ban policies and public awareness are likely the major mitigation interventions. The need for life cycle assessment and circularity to assess the potential environmental impacts and resources used throughout a plastic product’s life span is emphasized. Innovations are needed to reduce, reuse, recycle, and recover plastics and find eco-friendly replacements for plastics. Empowering and educating communities and citizens to act collectively to minimize plastic pollution and use alternative options for plastics must be promoted and enforced. Plastic pollution is a global concern that must be addressed collectively with the utmost priority.