Complex permittivity measurement as a new noninvasive tool for monitoring in vitro tissue engineering and cell signature through the detection of cell proliferation, differentiation, and pretissue formation

In in vitro tissue engineering, microporous scaffolds are commonly used to promote cell proliferation and differentiation in three-dimensional structures. Classic measurement methods are particularly time consuming, difficult to handle, and destructive. In this study, a new nondestructive method based on complex permittivity measurement (CPM) is proposed to monitor and track the osteoblast and macrophage differentiation through their morphological variation upon cell attachment and proliferation inside the microporous scaffolds. CPM is performed using a vector network analyzer and a dielectric probe under sterile conditions in a laminar-flow hood. A suitable effective medium approximation (EMA) is applied to fit the data in order to extract the parameters of the different constituents. Our data show that the EMA depolarization factor can be monitored to assess the variation of cell morphology characterizing cell attachment. Discrimination between two batches of scaffolds seeded, respectively, with 2 million and 1 million osteoblast cells is possible; the ratio of their CPM-derived cell volume fractions is in agreement with the ratio of their cell seeding numbers. In addition, cell proliferation inside scaffolds seeded with osteoblasts cultured in alpha minimum essential medium and inside scaffolds seeded with osteoblasts cultured in alpha minimum essential medium supplemented to induce the formation of extracellular matrix is monitored via CPM over several days. CPM-determined cell volume fraction is compared to DNA assay cell counts. Extracellular matrix formation and cell presence was confirmed by scanning electron microscopy. A set of three signature parameters (epsilon'mem, epsilon'cyt, kappa'cyt) characteristic of cell line is extracted from CPM. Distinct signatures are recorded for osteoblasts and macrophages, thus confirming the ability of CPM to discriminate between different cell types. This study demonstrates the potential of CPM as a diagnostic tool to monitor quickly and noninvasively cell growth and differentiation inside microporous scaffolds. Our findings suggest that the use of CPM could be extended to many biomedical applications, such as drug detection and automation of tissue and bacterial cultures in bioreactors.

Electrical bioimpedance measurement during hypothermic rat kidney preservation for assessing ischemic injury

Non-heart-beating donors sustain an ischemic insult of unknown severity and duration, which can compromise the viability of the graft. This preliminary study aimed to assess whether electrical bioimpedance monitoring of cold preserved organs could be useful to identify kidneys that have suffered previous warm ischemia (WI). Two rat groups were studied during 24 h of preservation in University of Wisconsin solution (UW): a control cold ischemia group and another group subjected previously to 45 min of WI. Multi-frequency bioimpedance was monitored during preservation by means of a miniaturized silicon probe and the results were modeled according to the Cole equation. Tissular ATP content, lactate dehydrogenase in UW solution and histological injury were assessed. Renal function and cell injury, evaluated during 3 h of ex vivo reperfusion using the isolated perfused rat kidney model, demonstrated differences between groups. Bioimpedance results showed that the time constant and the high frequency resistivity parameters derived from the Cole equation were able to discriminate between groups at the beginning of the preservation (Deltatau approximately 78%, DeltaRinfinity approximately 36%), but these differences tended to converge as preservation time advanced. Nevertheless, another of the Cole parameters, alpha, showed increasing significant differences until 24 h of preservation (Deltaalpha approximately 15%).

Transfection ofHeLa-cells withpEGFP plasmid by impedance power-assisted electroporation

Bioimpedance spectrometry was applied to study cell viability and pEGFP plasmid-transfection efficiency in electroporation (EP) of 20,000 HeLa cells with 0.3 microg DNA in 90 microl low conductivity 0.32 M sucrose medium of pH 7.5. Monopolar rectangular pulses, of field strength 75 V/mm, and pulse length 0.1 ms were applied in 1-16 repetitions with a 10-sec pause interval between pulses. Surviving cells were stained by crystal violet and counted using a confocal microscope. Transfected cells were fixed with 10% formaldehyde and counted as green spots in a fluorescence microscope. In the present investigation we used the method of bioimpedance spectrometry to analyze the effect of EP on survival and transfection ratio of cells in suspension. DC and low-frequency AC currents preferably pass through the medium due to the high impedance of the cell membrane. At frequencies above 10 kHz the impedance of the cell membrane starts to decrease and the impedance value of the cell suspension approach a lower limit value Rinfinity at infinite frequency. Recording of electrical impedance spectra of cells in culture was performed over a frequency range of 10 Hz to 125 kHz, allowing separation of the contribution from extracellular space and that of the cell membranes. A parallel resistance capacitance model of the cell suspension was used to evaluate the response of applying EP pulses. The values of the collective membrane resistance RM decay exponentially (r2=0.995) with the number of applied pulses. The ratio of the extrapolated value of the intact membrane resistance before pulsing, RM,0, and the value RM,N after each pulse makes an index of the effect of electroporation on the cells. The ratio RM,N/RM,0 as well as the relative change of the dissipation factor, tandelta, on the "Loss Change Index" (LCI) fits well a dose-response model (r2=0.98) with the number of applied pulses. The changes in the model parameters membrane resistance DeltaRM=[1-RM,N/RM,o] and loss factor [1-tandelta0/tandeltaN] correlate well with the transfection ratio and fraction of dead cells. Those parameters were used for power-assisted electroporation in monitoring, controlling, and optimizing the EP procedure.

Bioelectrical impedance assay to monitor changes in cell shape during apoptosis

Apoptosis is a strictly regulated and genetically encoded cell 'suicide' that may be triggered by cytokines, depletion of growth factors or certain chemicals. It is morphologically characterized by severe alterations in cell shape like cell shrinkage and disintegration of cell-cell contacts. We applied a non-invasive electrochemical technique referred to as electric cell-substrate impedance sensing (ECIS) in order to monitor the apoptosis-induced changes in cell shape in an integral and quantitative fashion with a time resolution in the order of minutes. In ECIS the cells are grown directly on the surface of small gold-film electrodes (d = 2 mm). From readings of the electrical impedance of the cell-covered electrode, performed with non-invasive, low amplitude sensing voltages, it is possible to deduce alterations in cell-cell and cell-substrate contacts. To improve the sensitivity of this impedance assay we used endothelial cells derived from cerebral micro-vessels as cellular model systems since these are well known to express electrically tight intercellular junctions. Apoptosis was induced by cycloheximide (CHX) and verified by biochemical and cytological assays. The time course of cell shape changes was followed with unprecedented time resolution by impedance readings at 1 kHz and correlated with biochemical parameters. From impedance readings along a broad frequency range of 1-10(6) Hz we could assign the observed impedance changes to alterations on the subcellular level. We observed that disassembly of barrier-forming tight junctions precedes changes in cell-substrate contacts and correlates strongly with the time course of protease activation.

An in-depth analysis of electric cell-substrate impedance sensing to study the attachment and spreading of mammalian cells

The attachment and spreading of fibroblast cells on a gold surface coated with fibronectin or ovalbumin were studied by a modified electric cell-substrate impedance sensor. In this system, cells were cultured in a well, equipped with a detecting gold electrode (surface area of 0.057 mm2) and a gold counter electrode (18 mm2). Based on a comprehensive theoretical framework, the impedance of the electrode-electrolyte interface and a cell layer was precisely obtained for frequencies ranging from 1 to 10 kHz. Surface concentrations of the protein adsorbed on the gold surface were determined by a surface plasmon resonance biosensor. The resistance change of the electrode-electrolyte interface at 4 kHz increased linearly with the number of fibroblast cells attached on the detecting electrode. The slope of the linear relationship appeared to depend on the type of coating protein. As the surface area occupied by the cells was also proportional to the cell number, the resistance change was in turn proportional to the area covered by the cells.

Microfabrication in biology and medicine

Microfabrication uses integrated-circuit manufacturing technology supplemented by its own processes to create objects with dimensions in the range of micrometers to millimeters. These objects can have miniature moving parts, stationary structures, or both. Microfabrication has been used for many applications in biology and medicine. These applications fall into four domains: tools for molecular biology and biochemistry, tools for cell biology, medical devices, and biosensors. Microfabricated device structures may provide significantly enhanced function with respect to a conventional device. Sometimes microfabrication can enable devices with novel capabilities. These enhancing and enabling qualities are conferred when microfabrication is used appropriately to address the right types of problems. Herein, we describe microfabrication technology and its application to biology and medicine. We detail several classes of advantages conferred by microfabrication and how these advantages have been used to date.

General purpose, field-portable cell-based biosensor platform

There are several groups of researchers developing cell-based biosensors for chemical and biological warfare agents based on electrophysiologic monitoring of cells. In order to transition such sensors from the laboratory to the field, a general-purpose hardware and software platform is required. This paper describes the design, implementation, and field-testing of such a system, consisting of cell-transport and data acquisition instruments. The cell-transport module is a self-contained, battery-powered instrument that allows various types of cell-based modules to be maintained at a preset temperature and ambient CO(2) level while in transit or in the field. The data acquisition module provides 32 channels of action potential amplification, filtering, and real-time data streaming to a laptop computer. At present, detailed analysis of the data acquired is carried out off-line, but sufficient computing power is available in the data acquisition module to enable the most useful algorithms to eventually be run real-time in the field. Both modules have sufficient internal power to permit realistic field-testing, such as the example presented in this paper.

A genetically engineered cell-based biosensor for functional classification of agents

Cell-based biosensors (CBBs) utilize whole cells to detect biologically active agents. Although CBBs have shown success in detecting the presence of biological agents, efforts to classify the type of agent based on functional activity have proven difficult because multiple biochemical pathways can lead to the same cellular response. However, a new approach using a genetically-engineered cell-based biosensor (GECBB) described in this paper translates this cross-talk noise into common-mode noise that can be rejected. The GECBB operates by assaying for an agent's ability to differentially activate two populations of cells, wild-type (WT) cells and cells genetically engineered to lack a specific receptor, knockout (KO) cells. Any biological agent that targets the knocked out receptor will evoke a response in the WT but not in the KO. Thus, the GECBB is exquisitely sensitive to agents that effect the engineered pathway. This approach provides the benefits of an assay for specific functional activity while simplifying signal analysis. The GECBB implemented was designed to be sensitive to agents that activate the beta 1-adrenergic receptor (beta 1-AR). This was achieved by using mouse cardiomyocytes in which the beta 1-AR had been knocked out. The cellular signal used in the GECBB was the spontaneous beat rate of the two cardiomyocyte syncitia as measured with microelectrode arrays. The GECBB was able to detect the beta-AR agonist isoproterenol (ISO) at a concentration of 10 microM (P<0.005).

Monitoring motility, spreading, and mortality of adherent insect cells using an impedance sensor

An emerging sensor technology referred to as electric cell-substrate impedance sensing (ECIS) has been extended for monitoring the behavior of insect cells including attachment, motility, and mortality. In ECIS, adherent cells were cultured on an array of eight small gold electrodes deposited on the bottom of tissue culture wells and immersed in a culture medium. Upon the attachment and spreading of cells on the gold electrode, the impedance increased because the cells acted as insulating particles to restrict the current flow. Experimental data revealed that insect cells interacted differently with various proteins used to precoat the gold electrode with concanavalin A as the best promoter to accelerate the rate of cell attachment. After the cells were fully spread, the measured impedance continued to fluctuate to reflect the constant motion and metabolic activity of the cells. As the cell behavior was sensitive to external chemicals, the applicability of ECIS for inhibition assays was demonstrated with HgCl2, trinitrotoluene, trinitrobenzene (TNB), and 2-amino-4,6-dinitrotoluene as model systems. Unlike conventional assays, the quantitative data obtained in this study are taken in real time and in a continuous fashion to depict cell motility and mortality.

Electric cell-substrate impedance sensing (ECIS) as a noninvasive means to monitor the kinetics of cell spreading to artificial surfaces

This article describes the optimization of an experimental technique referred to as electric cell-substrate impedance sensing (ECIS) to monitor attachment and spreading of mammalian cells quantitatively and in real time. The method is based on measuring changes in AC impedance of small gold-film electrodes deposited on a culture dish and used as growth substrate. Based on experimental data and theoretical considerations we demonstrate that high-frequency capacitance measurements (f = 40 kHz) are most suited to follow the increasing surface coverage of the electrode due to cell spreading. The excellent time resolution of the method allowed an in-depth analysis of cell spreading kinetics under various experimental conditions. Using ECIS we studied the attachment and spreading of epithelial MDCK cells (strain II) on different protein coatings, and investigated the influence of divalent cations on spreading kinetics. We quantified the inhibitory effect of soluble peptides that mimic the recognition sequence of fibronectin and other extracellular matrix proteins (RGDS). We also applied the ECIS technique to monitor the detachment of confluent fibroblastic cell layers (WI38/VA-13) by means of these peptides.

Biomass monitoring using impedance spectroscopy

The biomass density in biotechnological processes is often determined by indirect and manual methods. Electrical impedance spectroscopy can provide online viable biomass density estimators. In this work, we present two linear estimators obtained with this technique. Four different microorganisms were measured. The detection threshold was approximately 1 g/L (dry weight) for bacteria and 0.5 g/L for yeast. Liposome suspensions were also used to validate the methods. The monitoring of the continuous growth of a yeast culture is also presented.

Characterisation of cell movement by impedance measurement on fibroblasts grown on perforated Si-membranes

Mouse fibroblasts grown on perforated Si-membranes (pore diameter approximately 10 microns have been studied to clarify cell locomotive ability. The cell motility was microscopically monitored by a time-lapse video system and, simultaneously, the impedance of the growing cells was measured every 5 s. The correlations between observed cell activities and measured impedance events are discussed and classified. The method is sensitive and allows discrimination between signals arising from translocation of single cells and those arising from filopodia activities. Both cell and filopodia motion could be detected. Designs of microdevices fabricated in semiconductor technology are presented.