Materials for lithium-ion battery safety

Phase Evolution of Multi-Metal Dichalcogenides With Conversion-Alloying Hybrid Mechanism for Superior Lithium Storage

Traditional lithium-ion battery (LIB) anodes, whether intercalation-type like graphite or alloying-type like silicon, employing a single lithium storage mechanism, are often limited by modest capacity or substantial volume changes. Here, the kesterite multi-metal dichalcogenide (CZTSSe) is introduced as an anode material that harnesses a conversion-alloying hybrid lithium storage mechanism. Results unveil that during the charge-discharge processes, the CZTSSe undergoes a comprehensive phase evolution, transitioning from kesterite structure to multiple dominant phases of sulfides, selenides, metals, and alloys. The involvement of multi-components facilitates electron transport and mitigates swelling stress; meanwhile, it results in formation of abundant defects and heterojunctions, allowing for increased lithium storage active sites and reduced lithium diffusion barrier. The CZTSSe delivers a high specific capacity of up to 2266 mA h g-1 at 0.1 A g-1; while, maintaining a stable output of 116 mA h g-1 after 10 000 cycles at 20 A g-1. It also demonstrates remarkable low-temperature performance, retaining 987 mA h g-1 even after 600 cycles at -40 °C. When employed in full cells, a high specific energy of 562 Wh kg-1 is achieved, rivalling many state-of-the-art LIBs. This research offers valuable insights into the design of LIB electrodes leveraging multiple lithium storage mechanisms.

Flame-Retardant Nonaqueous Electrolytes for High-Safety Potassium-Ion Batteries

Potassium-ion batteries (PIBs) with conventional organic-based flammable electrolytes suffer from serious safety issues with a high risk of ignition and burning especially under harsh conditions, which significantly limits their widespread applications. Flame-retardant electrolytes (FREs) are considered as one of the most effective strategies to address these safety issues. Therefore, it's much necessary to summarize the challenges, recent progress, and design principles of flame-retardant nonaqueous electrolytes for PIBs to guide their development and future applications. In this review, an in-depth introduction and explanation of the origins of electrolyte flammability are first presented. Particularly, the state-of-the-art design principles of FREs for PIBs are extensively summarized and emphasized, including the electrolyte flame-retardant solvents/additives, highly concentrated electrolytes (HCEs), localized high-concentration electrolytes (LHCEs), ionic liquids-based electrolytes and solid-state electrolytes. Moreover, the advantages and drawbacks of each approach are systematically presented and discussed, following by proposed perspectives to guide the rational development of next-generation high-safety PIBs for practical applications.

Potential Gradient-Driven Dual-Functional Electrochromic and Electrochemical Device Based on a Shared Electrode Design

The integration of electrochromic devices and energy storage systems in wearable electronics is highly desirable yet challenging, because self-powered electrochromic devices often require an open system design for continuous replenishment of the strong oxidants to enable the coloring/bleaching processes. A self-powered electrochromic device has been developed with a close configuration by integrating a Zn/MnO2 ionic battery into the Prussian blue (PB)-based electrochromic system. Zn and MnO2 electrodes, as dual shared electrodes, the former one can reduce the PB electrode to the Prussian white (PW) electrode and serves as the anode in the battery; the latter electrode can oxidize the PW electrode to its initial state and acts as the cathode in the battery. The bleaching/coloring processes are driven by the gradient potential between Zn/PB and PW/MnO2 electrodes. The as-prepared Zn||PB||MnO2 system demonstrates superior electrochromic performance, including excellent optical contrast (80.6%), fast self-bleaching/coloring speed (2.0/3.2 s for bleaching/coloring), and long-term self-powered electrochromic cycles. An air-working Zn||PB||MnO2 device is also developed with a 70.3% optical contrast, fast switching speed (2.2/4.8 s for bleaching/coloring), and over 80 self-bleaching/coloring cycles. Furthermore, the closed nature enables the fabrication of various flexible electrochromic devices, exhibiting great potentials for the next-generation wearable electrochromic devices.

Second-harmonic electron paramagnetic resonance spectroscopy and imaging reveal metallic lithium depositions in Li-ion batteries

We have investigated metallic lithium particle nucleation following lithiation and delithiation steps of the graphite electrode using X-band electron paramagnetic resonance (EPR). Metallic lithium aggregates like dendrites and/or filaments which are formed during electrochemical cycling on the graphite anode are complex structures which may lead to internal short-circuit and safety issues. Understanding and following, in real conditions, this nucleation process is necessary to improve the development of Li-ion batteries. The complexity to detect metallic lithium structures inside Li-ion batteries depends on the number of EPR lines and their linewidth. The presence of lithiated graphite phases affects the detection of micrometric Li-metal elements. Herein, we report a new approach using cw-EPR (continuous-wave EPR) spectroscopy and imaging, combining the first- and second-harmonic detection schemes to provide evidence for the metallic lithium aggregate nucleation in these negative electrodes. Although the first harmonic gives all the EPR signals present in the sample, it is found that the second-harmonic EPR signal is mainly sensitive to metallic lithium depositions.

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

To enhance energy density and secure the safety of lithium-ion batteries, developing solid-state electrolytes is a promising strategy. In this study, a composite solid-state electrolyte (CSE) composed of poly(vinylidene difluoride) (PVDF)/cellulose acetate (CA) matrix, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt, and Li1.3Al0.3Ti1.7(PO4)3 (LATP) fillers is developed via a facile solution-casting method. The PVDF/CA ratio, LiTFSI, and LATP fractions affect the crystallinity, structural porosity, and thermal and electrochemical stability of the PVDF/CA/LATP CSE. The optimized CSE (4P1C-40LT/20F) presents a high ionic conductivity of 4.9 × 10-4 S cm-1 and a wide electrochemical window up to 5.0 V vs. Li/Li+. A lithium iron phosphate-based cell containing the CSE delivers a high discharge capacity of over 160 mAh g-1 at 25 °C, outperforming its counterpart containing PVDF/CA polymer electrolyte. It also exhibits satisfactory cycling stability at 1C with approximately 90 % capacity retention at the 200th cycle. Additionally, its rate performance is promising, demonstrating a capacity retention of approximately 80 % under varied rates (2C/0.1C). The increased amorphous region, Li+ transportation pathways, and Li+ concentration of the 4P1C-40LT/20F CSE membrane facilitate Li+ migration within the CSE, thus improving the battery performance.

Eco-friendly synthesis of an α-Fe2O3/rGO nanocomposite and its application in high-performance asymmetric supercapacitors

This work presents an innovative and environmentally friendly biological synthesis approach for producing α-Fe2O3 nanoparticles (NPs) and the successful synthesis of α-Fe2O3/reduced graphene oxide (rGO) nanocomposites (NCs). This novel synthesis route utilizes freshly extracted albumin, serving as both a reducing agent and a stabilizing agent, rendering it eco-friendly, cost-effective, and sustainable. A combination of characterization techniques including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) was employed to predict and confirm the formation of the as-synthesized α-Fe2O3 NPs and α-Fe2O3/rGO NCs. Transmission electron microscopy (TEM) verified the anisotropic nature of the synthesized nanoparticles. To gain insight into the enhanced capacitance of the α-Fe2O3/rGO NCs, a series of electrochemical tests, namely cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), electrochemical impedance spectroscopy (EIS), and stability assessments, were conducted in a conventional three-electrode configuration. Furthermore, a two-electrode asymmetric supercapacitor (ASC) device was fabricated to assess the practical viability of this material. The α-Fe2O3/rGO NCs exhibited a remarkable potential window of 2 V in an aqueous electrolyte, coupled with exceptional cycling stability. Even after undergoing 10 000 cycles, the capacitive retention exceeded 100%, underlining the promising potential of this material for advanced energy storage applications.

Toward the High-Voltage Stability of Layered Oxide Cathodes for Sodium-Ion Batteries: Challenges, Progress, and Perspectives

Sodium-ion batteries (SIBs) have garnered significant attention as ideal candidates for large-scale energy storage due to their notable advantages in terms of resource availability and cost-effectiveness. However, there remains a substantial energy density gap between SIBs and commercially available lithium-ion batteries (LIBs), posing challenges to meeting the requirements of practical applications. The fabrication of high-energy cathodes has emerged as an efficient approach to enhancing the energy density of SIBs, which commonly requires cathodes operating in high-voltage regions. Layered oxide cathodes (LOCs), with low cost, facile synthesis, and high theoretical specific capacity, have emerged as one of the most promising candidates for commercial applications. However, LOCs encounter significant challenges when operated in high-voltage regions such as irreversible phase transitions, migration and dissolution of metal cations, loss of reactive oxygen, and the occurrence of serious interfacial parasitic reactions. These issues ultimately result in severe degradation in battery performance. This review aims to shed light on the key challenges and failure mechanisms encountered by LOCs when operated in high-voltage regions. Additionally, the corresponding strategies for improving the high-voltage stability of LOCs are comprehensively summarized. By providing fundamental insights and valuable perspectives, this review aims to contribute to the advancement of high-energy SIBs.

A High-Entropy Prussian Blue Analog for Aqueous Potassium-Ion Batteries

Aqueous potassium-ion batteries (AKIBs) are considered promising electrochemical energy storage systems owing to their high safety and cost-effectiveness. However, the structural degradation resulting from the repeated accommodation of large K-ions and the dissolution of active electrode materials in highly dielectric aqueous electrolytes often lead to unsatisfactory electrochemical performance. This study introduces a high-entropy Prussian blue analog (HEPBA) cathode material for AKIBs, demonstrating significantly enhanced structural stability and reduced dissolution. The HEPBA exhibits a highly reversible specific capacity of 102.4 mAh g-1, with 84.4% capacity retention after undergoing 3448 cycles over a duration of 270 days. Mechanistic insights derived from comprehensive experimental investigations, supported by theoretical calculations, reveal that the HEPBA features a robust structure resistant to dissolution, a solid-solution reaction pathway with negligible volume variation during charge-discharge, and efficient ion transport kinetics characterized by a reduced band gap and a low energy barrier. This study represents a measurable step forward in the development of long-lasting electrode materials for aqueous AKIBs.

Development of composite separators by coating hydrochloric acid-treated halloysite nanotubes on polypropylene separators for lithium-ion batteries

In this study, polypropylene/halloysite nanotube (PP/HNT) composite separators were prepared by coating HNTs treated with hydrochloric acid (HCl) of different concentrations on both sides of a PP separator. The effect of HNTs treated with hydrochloric acid (HCl) of different concentrations on the properties of PP/HNT composite separators was investigated. The results indicate that the PP/HNT composite separator exhibits higher electrolyte uptake and wettability than a commercial PP separator, resulting in a better electrochemical performance in Li/LiFePO4 cells. In particular, the PP/HNTs-1.2 M composite separator with HNTs treated with 1.2 M HCl exhibits the highest electrolyte uptake (384%) and ionic conductivity (1.03 mS cm-1). The cells assembled with a PP/HNTs-1.2 M composite separator deliver discharge capacities of 166 mA h g-1 (0.5 C) and 131 mA h g-1 (3 C) with attractive cycling performance (87.6% capacity retention after 100 cycles). HNTs treated with HCl of appropriate concentrations can significantly improve the properties of PP/HNT composite separators for application in lithium-ion batteries.

Fast formation of anode-free Li-metal batteries by pulsed current

Anode-free Li-metal batteries offer high energy density but are prone to dendrite formation during charging which can cause catastrophic failures. Ensuring dendrite-free smooth Li deposits during charging is therefore necessary. Suppressing dendrite growth can be achieved by pulsed current charging, especially during the formation cycle that largely determines the corrosion trajectory of a cell. As opposed to the constant-current technique, pulsed current techniques apply intermittently stopped current flows. This work investigates the electroplating of metallic Li onto a Cu foil current collector under constant-current and pulsed current formation protocols. In addition to smoother, less resistive electroplated metallic Li deposits and increased Coulombic efficiency, we show that by employing an optimized pulsed current formation protocol, the formation process is accelerated by a factor of 2 and the Coulombic efficiency was increased by 10% compared to a C/20 protocol. Finally, by employing a simple regression coupled to experimentation, we propose the pseudo-IR-drop to be used for live adjustment of pulsed current protocols i.e., individually approach each cell at all SOC during formation.

Thermal stability analysis of nitrile additives in LiFSI for lithium-ion batteries: An accelerating rate calorimetry study

Although lithium-ion batteries (LIBs) are extensively used as secondary storage energy devices, they also pose a significant fire and explosion hazard. Subsequently, thermal stability studies for LiPF6- and LiFSI-type electrolytes have been conducted extensively. However, the thermal characteristics of these electrolytes with thermally stable additives in a full cell assembly have yet to be explored. This study presents a comprehensive accelerating rate calorimetry (ARC) study. First, 1.2-Ah cells were prepared using a control commercial LiPF6 electrolyte and LiFSI with a specific succinonitrile additive and ethyl-methyl carbonate as a thermally stable electrolyte additive. The kinetic parameters involved in heat generation and their effects on the thermal properties of the ARC module were analyzed from the heat-wait-seek (HWS), self-heating (SH), and thermal runaway (TR) stages. The results indicate that the addition of a succinonitrile additive to the LiFSI electrolyte lowers the decomposition temperatures of the solid electrolyte interface (SEI) owing to polymerization with Li at the anode, while simultaneously increasing the activation energy of reaction temperatures at SEI between the separator and the electrolyte. The maximum thermal-runaway temperature decreased from 417 °C (ΔH = 5.26 kJ) (LiPF6) to 285 °C (ΔH = 2.068 kJ) (LiFSI + succinonitrile). This study provides key insights to the thermal characteristics of LiPF6 and LiFSI during the self-heating and thermal runaway stages and indicates a practical method for achieving thermally stable LIBs.

A porous organic polymer for symmetric sodium dual-ion batteries through an adsorption-intercalation-insertion mechanism

A porous organic polymer (POP) has been developed for dual-ion storage in all organic symmetric rechargeable batteries. The triphenylamine-pyrene-based POP could host sodium and hexafluorophosphate ions acting as the anode and the cathode, respectively, through the adsorption-intercalation and insertion mechanism. The current study highlights the concept of widening the potential window of a dual ion battery by judicious selection of the constituent moieties.

Machine Learning on Microstructure-Property Relationship of Lithium-Ion Conducting Oxide Solid Electrolytes

Understanding the structure-property relationship of lithium-ion conducting solid oxide electrolytes is essential to accelerate their development and commercialization. However, the structural complexity of nonideal materials increases the difficulty of study. Here, we develop an algorithmic framework to understand the effect of microstructure on the properties by linking the microscopic morphology images to their ionic conductivities. We adopt garnet and perovskite polycrystalline oxides as examples and quantify the microscopic morphologies via extracting determined physical parameters from the images. It directly visualizes the effect of physical parameters on their corresponding ionic conductivities. As a result, we can determine the microstructural features of a Li-ion conductor with high ionic conductivity, which can guide the synthesis of highly conductive solid electrolytes. Our work provides a novel approach to understanding the microstructure-property relationship for solid-state ionic materials, showing the potential to extend to other structural/functional ceramics with various physical properties in other fields.

Halogen-powered static conversion chemistry

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

A Thermal-Ball-Valve Structure Separator for Highly Safe Lithium-Ion Batteries

The separator located between the positive and negative electrodes not only provides a lithium-ion transmission channel but also prevents short circuits for direct contact of electrodes. The inferior dimension thermostability of commercial polyolefin separators intensifies the thermal runaway of batteries under abuse such as short circuits, overcharge, and so on. a polyvinylidene fluoride/polyether imide (PVDF/PEI) separator with high thermal stability in which the high thermostable PEI microspheres are evenly dispersed in the PVDF film matrix and also located in the micro holes of the PVDF film is developed. They not only function as strong skeleton that enables the rare shrink of the separator at 200 °C avoiding short circuit but also act as ball valve that blocks the lithium ion transmission channel at 150 °C interrupting the further heat aggregation. Thus, the LiNi0.6Co0.2Mn0.2O2/Li batteries exhibit high cycle stability of 96.5% capacity retention after 100 cycles at 0.2C and 80°C. Further, the LiNi0.6Co0.2Mn0.2O2/graphite pouch cells are constructed and deliver good safety performance without smoke release and catching fire after the nail penetration test.

An Ultrathin Composite Polymer Electrolyte Dual-Reinforced by a Polymer of Intrinsic Microporosity (PIM-1) and Poly(tetrafluoroethylene) (PTFE) Porous Membrane

The performances of solid-state polymer electrolytes are urgently required to be further improved for high energy density lithium metal batteries. Herein, a highly reinforced ultrathin composite polymer electrolyte (PLPP) is successfully fabricated in a large scale by densely filling the well-dispersed mixture of polyethylene oxide (PEO), Li-salt (LiTFSI) and a polymer of intrinsic microporosity (PIM-1) into porous poly(tetrafluoroethylene) (PTFE) matrix. Based on the macro-plus-micro synergistic enhancement of the PTFE with excellent mechanical properties and the soluble PIM-1 with suitable functional groups, the PLPP electrolyte exhibits excellent properties including mechanical stress, thermal stability, lithium-ion transference number, voltage window and ionic conductivity, which are all superior to the typical PEO/LiTFSI electrolytes. As a result, the Li/PLPP/Li symmetric cell can stably cycle for > 2000 h, and the LiFePO4/PLPP/Li full cell exhibits excellent rate performance (>10 C) and high cycling stability with an initial capacity of 158.8 mAh g-1 and a capacity retention of 78.8% after 300 cycles. In addition, the excellent mechanical properties as well as the wide voltage window reasonably result in the stable operation of full cells with either high-loading cathode up to 28.1 mg cm-2 or high voltage cathode with high energy density.

Lightweight Carbon-Metal-Based Fabric Anode for Lithium-Ion Batteries

Lithium-ion battery electrodes are typically manufactured via slurry casting, which involves mixing active material particles, conductive carbon, and a polymeric binder in a solvent, followed by casting and drying the coating on current collectors (Al or Cu). These electrodes are functional but still limited in terms of pore network percolation, electronic connectivity, and mechanical stability, leading to poor electron/ion conductivities and mechanical integrity upon cycling, which result in battery degradation. To address this, we fabricate trichome-like carbon-iron fabrics via a combination of electrospinning and pyrolysis. Compared with slurry cast Fe2O3 and graphite-based electrodes, the carbon-iron fabric (CMF) electrode provides enhanced high-rate capacity (10C and above) and stability, for both half cell and full cell testing (the latter with a standard lithium nickel manganese oxide (LNMO) cathode). Further, the CMFs are free-standing and lightweight; therefore, future investigation may include scaling this as an anode material for pouch cells and 18,650 cylindrical batteries.

Phase Change Nanocapsules Enabling Dual-Mode Thermal Management for Fast-Charging Lithium-Ion Batteries

The fast-charging performance of conventional lithium-ion batteries (LIBs) is determined by the working temperature. LIBs may fail to work under harsh conditions, especially in the low-temperature range of the local environment or in the high-temperature circumstances resulting from the release of substantial Joule heating in the short term. Constructing a thermal engineering framework for thermal regulation and maintaining the battery running at an appropriate temperature range are feasible strategies for developing temperature-tolerant, fast-charging LIBs. In this work, we prepare phase change nanocapsules as a thermal regulating layer on the cell surface. The polyurea shells of the nanocapsules are decorated with polyaniline, where the molecular vibration of polyaniline is enhanced under solar irradiation, enabling light-to-heat conversion that achieves an effective temperature increment at low temperatures. Based on the large latent heat storage capability of the n-octadecane core in the nanocapsules, the thermal regulating layer is sufficient to modulate strong heat release when operating LIBs at a high current rate, which efficiently prevents strong side reactions at high temperatures or even the occurrence of thermal runaway. This work highlights the promise of optimizing the operating temperature with a thermal regulator to ensure the safety and performance stability of fast-charging LIBs.

Porous carbohydrate-graphene aerogels synthesized by green method as electroactive supercapacitor materials

Various graphene derivatives have been known as electrode-active materials for fabricating supercapacitors. Interconnected graphene networks with adjustable porous structures, i.e., 3D graphene aerogels (GAs), can control the restacking of graphene sheets very well and, thus, lead to the enhanced performance supercapacitors. In this study, carbohydrates (sucrose and fructose) were used to make two types of 3D porous carbohydrates-graphene aerogels, sucrose-graphene aerogel (SCR) and fructose-graphene aerogel (FRC). Carbohydrates operate as a cross-linking and reductant agent. Voltammograms of supercapacitor electrodes based on the FRC and SCR indicate a more rectangular shape with a larger area and a superior current than the GA (graphene aerogel without using carbohydrates) electrode. They have better capacitive performance, more electron transportation ability, and higher specific capacitance (CS) values than GA. The supercapacitor electrodes based on FRC, SCR, and GA demonstrate the CS values of 257.2 F g -1, 221.0 F g -1, and 95 F g -1 at ѵ = 10 mV.s-1, respectively. Improvement in the performance of SCR and FRC supercapacitor electrodes, in comparison to GA, is attributed to the porous interconnected feature of their structures and their suitable available surface area, which facilitates electron and ion transportation throughout graphene networks. These supercapacitors also show excellent stability after recording 5000 consecutive voltammograms.

Lithium-ion battery electrode properties of hydrogen boride

Recently, hydrogen boride (HB) with a pseudo-two-dimensional sheet structure was successfully synthesized, and it is theoretically predicted to have high potential as a negative electrode material for alkali metal ion batteries, making it a promising new candidate. This study represents the first experimental examination of the negative electrode properties of HB. HB was synthesized via cation exchange from MgB2. The confirmation of HB synthesis was achieved through various spectroscopic experiments, including synchrotron radiation X-ray diffraction and X-ray photoelectron spectroscopy, in addition to direct observation using transmission electron microscopy. The HB electrode was prepared by mixing the HB powder sample with conductive additive carbon black and a polymer binder. A test cell was assembled with the HB electrode as the working electrode, and lithium metal as the counter and reference electrodes, and its battery electrode properties were evaluated. Although reversible charge-discharge curves with good reversibility were observed, the reversible capacity was 100 ± 20 mA h g-1 which is significantly smaller than the theoretical predictions. Nitrogen gas adsorption experiments were performed on the HB powder sample to determine the specific surface area indicating that the HB sheets were stacked together. It is plausible to consider that this stacking structure led to a reduced lithium-ion storage capacity compared to the theoretical predictions.

Advances in All-Solid-State Lithium-Sulfur Batteries for Commercialization

Solid-state batteries are commonly acknowledged as the forthcoming evolution in energy storage technologies. Recent development progress for these rechargeable batteries has notably accelerated their trajectory toward achieving commercial feasibility. In particular, all-solid-state lithium-sulfur batteries (ASSLSBs) that rely on lithium-sulfur reversible redox processes exhibit immense potential as an energy storage system, surpassing conventional lithium-ion batteries. This can be attributed predominantly to their exceptional energy density, extended operational lifespan, and heightened safety attributes. Despite these advantages, the adoption of ASSLSBs in the commercial sector has been sluggish. To expedite research and development in this particular area, this article provides a thorough review of the current state of ASSLSBs. We delve into an in-depth analysis of the rationale behind transitioning to ASSLSBs, explore the fundamental scientific principles involved, and provide a comprehensive evaluation of the main challenges faced by ASSLSBs. We suggest that future research in this field should prioritize plummeting the presence of inactive substances, adopting electrodes with optimum performance, minimizing interfacial resistance, and designing a scalable fabrication approach to facilitate the commercialization of ASSLSBs.

Applications of electron microscopic observations to electrochemistry in liquid electrolytes for batteries

Herein, we review notable points from observations of electrochemical reactions in a liquid electrolyte by liquid-phase electron microscopy. In situ microscopic observations of electrochemical reactions are urgently required, particularly to solve various battery issues. Battery performance is evaluated by various electrochemical measurements of bulk samples. However, it is necessary to understand the physical/chemical phenomena occurring in batteries to elucidate the reaction mechanisms. Thus, in situ microscopic observation is effective for understanding the reactions that occur in batteries. Herein, we focus on two methods, of the liquid phase (scanning) transmission electron microscopy and liquid phase scanning electron microscopy, and summarize the advantages and disadvantages of both methods.

From power to plants: unveiling the environmental footprint of lithium batteries

Widespread adoption of lithium-ion batteries in electronic products, electric cars, and renewable energy systems has raised severe worries about the environmental consequences of spent lithium batteries. Because of its mobility and possible toxicity to aquatic and terrestrial ecosystems, lithium, as a vital component of battery technology, has inherent environmental problems. Leaching of lithium from discharged batteries, as well as its subsequent migration through soil and water, represents serious environmental hazards, since it accumulates in the food chain, impacting ecosystems and human health. This study thoroughly analyses the effects of lithium on plants, including its absorption, transportation, and toxicity. An attempt has been made to examine how lithium moves throughout plants through symplastic and apoplastic pathways and the factors that affect lithium accumulation in plant tissues, such as soil pH and calcium. This review focuses on the possible toxicity of lithium and its impact on ecosystems and human health. Aside from examining the environmental impacts, this review also emphasizes the significance of proper disposal and recycling measures in order to offset the negative effects of used lithium batteries. The paper also highlights the need for ongoing research to develop innovative and sustainable techniques for lithium recovery and remediation.

Dressing Paraffin Wax/Boron Nitride Phase Change Composite with a Polyethylene "Underwear" for the Reliable Battery Safety Management

Phase change material (PCM) can provide a battery system with a buffer platform to respond to thermal failure problems. However, current PCMs through compositing inorganics still suffer from insufficient thermal-transport behavior and safety reliability against external force. Herein, a best-of-both-worlds method is reported to allow the PCM out of this predicament. It is conducted by combining a traditional PCM (i.e., paraffin wax/boron nitride) with a spirally weaved polyethylene fiber fabric, just like the traditional PCM is wearing functional underwear. On the one hand, the spirally continuous thermal pathways of polyethylene fibers in the fabric collaborate with the boron nitride network in the PCM, enhancing the through-plane and in-plane thermal conductivity to 10.05 and 7.92 W m-1 K, respectively. On the other, strong polyethylene fibers allow the PCM to withstand a high puncture strength of 47.13 N and tensile strength of 18.45 MPa although above the phase transition temperature. After this typical PCM packs a triple Li-ion battery system, the battery can be promised reliable safety management against both thermal and mechanical abuse. An obvious temperature drop of >10 °C is observed in the battery electrode during the cycling charging and discharging process.

Grave-to-cradle photothermal upcycling of waste polyesters over spent LiCoO2

Lithium-ion batteries (LIBs) and plastics are pivotal components of modern society; nevertheless, their escalating production poses formidable challenges to resource sustainability and ecosystem integrity. Here, we showcase the transformation of spent lithium cobalt oxide (LCO) cathodes into photothermal catalysts capable of catalyzing the upcycling of diverse waste polyesters into high-value monomers. The distinctive Li deficiency in spent LCO induces a contraction in the Co-O6 unit cell, boosting the monomer yield exceeding that of pristine LCO by a factor of 10.24. A comprehensive life-cycle assessment underscores the economic viability of utilizing spent LCO as a photothermal catalyst, yielding returns of 129.6 $·kgLCO-1, surpassing traditional battery recycling returns (13-17 $·kgLCO-1). Solar-driven recycling 100,000 tons of PET can reduce 3.459 × 1011 kJ of electric energy and decrease 38,716 tons of greenhouse gas emissions. This work unveils a sustainable solution for the management of spent LIBs and plastics.

Hygroscopic Solutes Enable Non-van der Waals Electrolytes for Fire-Tolerant Dual-Air Batteries

Thermal safety issues of batteries have hindered their large-scale applications. Nonflammable electrolytes improved safety but solvent evaporation above 100 °C limited thermal tolerance, lacking reliability. Herein, fire-tolerant metal-air batteries were realized by introducing solute-in-air electrolytes whose hygroscopic solutes could spontaneously reabsorb the evaporated water solvent. Using Zn/CaCl2 -in-air/carbon batteries as a proof-of-concept, they failed upon burning at 631.8 °C but self-recovered then by reabsorbing water from the air at room temperature. Different from conventional aqueous electrolytes whose irreversible thermal transformation is determined by the boiling points of solvents, solute-in-air electrolytes make this transformation determined by the much higher decomposition temperature of solutes. It was found that stronger intramolecular bonds instead of intermolecular (van der Waals) interactions were strongly correlated to ultra-high tolerance temperatures of our solute-in-air electrolytes, inspiring a concept of non-van der Waals electrolytes. Our study would improve the understanding of the thermal properties of electrolytes, guide the design of solute-in-air electrolytes, and enhance battery safety.

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

The battery technology progress has been a contradictory process in which performance improvement and hidden risks coexist. Now the battery is still a "black box", thus requiring a deep understanding of its internal state. The battery should "sense its internal physical/chemical conditions", which puts strict requirements on embedded sensing parts. This paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed, focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition, electrolyte degradation, electrode-electrolyte interface dynamics to three-dimensional macro-safety evolution. The paper contributes to understanding how to use optical fiber sensors to achieve "real" and "embedded" monitoring. Through the inherent advantages of the advanced optical fiber sensor, it helps clarify the battery internal state and reaction mechanism, aiding in the establishment of more detailed models. These advancements can promote the development of smart batteries, with significant importance lying in essentially promoting the improvement of system consistency. Furthermore, with the help of smart batteries in the future, the importance of consistency can be weakened or even eliminated. The application of advanced optical fiber sensors helps comprehensively improve the battery quality, reliability, and life.

Boosting Potassium Adsorption and Diffusion Performance of Carbon Anodes for Potassium-Ion Batteries via Topology and Curvature Engineering: From KT-Graphene to KT-CNTs

We propose a two-dimensional carbon allotrope (named KT-graphene) by incorporating kagome and tetragonal lattices consisting of trigonal, quadrilateral, octagonal, and dodecagonal rings. The introduction of non-hexagonal rings can give rise to the localized electronic states that improve the chemical reactivity toward potassium, making KT-graphene a high-performance anode material for potassium-ion batteries. It shows a high theoretical capacity (892 mAh g-1), a low diffusion barrier (0.33 eV), and a low average open-circuit voltage (0.51 V). The presence of electrolyte solvents is propitious to boost the K-ion adsorption and diffusion capabilities. Moreover, one-dimensional nanotubes (KT-CNTs), rolled up by the KT-graphene sheet, are metallic regardless of the tube diameter. As the curvature increases, KT-CNTs exhibit significantly increased surface activity, which can promote the electron-donating ability of K. Furthermore, the curvature effect greatly enhances the efficiency of K diffusion on the inner surface compared to that on the outer surface.

Insights into Nano- and Micro-Structured Scaffolds for Advanced Electrochemical Energy Storage

Adopting a nano- and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy storage devices at all technology readiness levels. Due to various challenging issues, especially limited stability, nano- and micro-structured (NMS) electrodes undergo fast electrochemical performance degradation. The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement, even though it only occupies complementary and facilitating components for the main mechanism. However, extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies. This review will aim at highlighting these NMS scaffold design strategies, summarizing their corresponding strengths and challenges, and thereby outlining the potential solutions to resolve these challenges, design principles, and key perspectives for future research in this field. Therefore, this review will be one of the earliest reviews from this viewpoint.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Hydrolysis of Solid Buffer Enables High-Performance Aqueous Zinc Ion Battery

Aqueous zinc (Zn) ion batteries (AZIBs) have not yet fulfilled their talent of high safety and low cost since the anode/electrolyte interface (AEI) has long been impeded by hydrogen evolution, surface corrosion, dendritic growth, and by-product accumulation. Here, the hydrolysis of solid buffers is elaborately proposed to comprehensively and enduringly handle these issues. Take 2D layered black phosphorus (BP) as a hydrolytic subject. It is reported that the phosphoric acid generated by hydrolysis in an aqueous electrolyte produces a zinc phosphate (ZPO) rich solid electrolyte interphase (SEI) layer, which largely inhibits the dendrite growth, surface corrosion, and hydrogen evolution. Meanwhile, the hydrolytic phosphoric acid stabilizes the pH value near AEI, avoiding the accumulation of alkaline by-products. Notably, compared with the disposable ZPO engineerings of anodic SEI pre-construction and electrolyte additive, the hydrolysis strategy of BP can realize a dramatically prolonged protective effect. As a result, these multiple merits endow BP modified separator to achieve improved stripping/plating stability toward Zn anode with more than ten times lifespan enhancement in Zn||Zn symmetrical cell. More encouragingly, when coupled with a V2 O5 ·nH2 O cathode with ultra-high loadings (34.1 and 28.7 mg cm-2 ), the cumulative capacities are remarkably promoted for both coin and pouch cells.

Rational Design of a Cross-Linked Composite Solid Electrolyte for Li-Metal Batteries

The interfacial problem caused by solid-solid contact is an important issue faced by a solid-state electrolyte (SSE). Herein, a cross-linked composite solid electrolyte (CSE) poly(vinylene carbonate) (PVCA)─ethoxylated trimethylolpropane triacrylate (ETPTA)─Li1.5Al0.5Ge1.5(PO4)3 (LAGP) (PEL) is prepared by in situ thermal polymerization. The ionic conductivity and Li+ transference number (tLi+) of PEL increase significantly due to the addition of LAGP, which can reach 1.011 × 10-4 S cm-1 and 0.451 respectively. The electrochemical stable window is also widened to 4.68 V. Benefiting from the integrated interfacial structure, the assembled coin cell shows low interfacial resistance. The all-solid-state NCM622|PEL|Li coin cell exhibits an initial discharge capacity of 169.7 mA h g-1 and 70% capacity retention over 100 cycles at 0.2 C, demonstrating excellent cycling stability.

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

Electrolytes play a critical role in battery performance. They are associated with an increased risk of safety issues. The main challenge faced by many researchers is how to balance the physical and electrical properties of electrolytes. Gel polymer electrolytes (GPEs) have received increasing attention due to their satisfactory properties of ionic conductivity, mechanical stability, and safety. Herein, we develop a gel network polymer electrolyte (GNPE) to address the challenge mentioned earlier. This GNPE was formed by tri-epoxide monomer and bis(fluorosulfonyl)imide lithium salt (LiFSI) via an in situ cationic polymerization under mild thermal conditions. The obtained GNPE exhibited a relatively high ionic conductivity (σ) of 2.63 × 10-4 S cm-1, lithium transference number (tLi+, 0.58) at room temperature (RT), and intimate electrode compatibility with LiFePO4 and graphite. The LiFePO4/GNPE/graphite battery also showed a promising cyclic performance at RT, e.g., a suitable discharge specific capacity of 127 mAh g-1 and a high Coulombic efficiency (>97%) after 100 cycles at 0.2 C. Moreover, electrolyte films showed good mechanical stability and formed the SEI layer on the graphite anode. This study provides a facile method for preparing epoxy-based electrolytes for high-performance lithium-ion batteries (LIBs).

Intercalation pseudocapacitance mechanism realizes high-performance cathode for aqueous potassium ion batteries

Aqueous potassium-ion batteries have garnered significant interest due to their eco-friendly characteristics and affordability. However, The suboptimal lifetime and restricted energy density of electrode materials present considerable obstacles to the advancement of aqueous potassium ion batteries. In this paper, we report a Ce doped MnO2 material (Ce-MnO2). Ce-MnO2 with large lattice spacing and abundant oxygen defects successfully triggered the intercalation pseudocapacitance behavior in aqueous potassium ion batteries. The intercalation pseudocapacitance mechanism gives MnO2 good capacity and enhanced stability. The Ce-MnO2 demonstrates a high discharge capacity of 120 mAh g-1 at 1 A g-1 with a low concentration electrolyte. It also has a capacity retention rate of 82.5% at 2000 cycles at 5 A g-1. The application of the intercalation pseudocapacitance mechanism offers a new approach to addressing the challenges associated with aqueous potassium-ion batteries.

Contributing to the Revolution of Electrolyte Systems via In Situ Polymerization at Different Scales: A Review

Solid-state batteries have become the most anticipated option for compatibility with high-energy density and safety. In situ polymerization, a novel strategy for the construction of solid-state systems, has extended its application from solid polymer electrolyte systems to other solid-state systems. This review summarizes the application of in situ polymerization strategies in solid-state batteries, which covers the construction of polymer, the formation of the electrolyte system, and the design of the full cell. For the polymer skeleton, multiple components and structures are being chosen. In the construction of solid polymer electrolyte systems, the choice of initiator for in situ polymerization is the focus of this review. New initiators, represented by lithium salts and additives, are the preferred choice because of their ability to play more diverse roles, while the coordination with other components can also improve the electrical properties of the system and introduce functionalities. In the construction of entire solid-state battery systems, the application of in situ polymerization to structure construction, interface construction, and the use of separators with multiplex functions has brought more possibilities for the development of various solid-state systems and even the perpetuation of liquid electrolytes.

Promoting Homogeneous Zinc-Ion Transfer Through Preferential Ion Coordination Effect in Gel Electrolyte for Stable Zinc Metal Batteries

Aqueous zinc metal batteries (AZMBs) are emerging energy storage systems that are poised to replace conventional lithium-ion batteries owing to their intrinsic safety, facile manufacturing process, economic benefits, and superior ionic conductivity. However, the issues of inferior anode reversibility and dendritic plating during operation remain challenging for the practical use of AZMBs. Herein, a gel electrolyte based on zwitterionic poly(sulfobetaine methacrylate) (poly(SBMA)) dissolved with different concentrations of ZnSO4 is proposed. Two-dimensional correlation spectroscopy based on Raman analysis reveals an enhanced interaction priority between the polar groups in SBMA and the dissolved ions as electrolyte concentration increases, which establishes a robust interaction and renders homogeneous ion distribution. Attributable to the modified coordination, zwitterionic gel polymer electrolyte with 5 mol kg-1 of ZnSO4 (ZGPE-5) facilitates stable zinc deposition and improves anode reversibility. By taking advantage of preferential coordination, a symmetrical cell evaluation employing ZGPE-5 demonstrates a cycle life over 3600 h, where ZGPE-5 also exerts a beneficial effect on the full cell cycling when assembled with Zn0.25 V2 O5 cathode. This study elucidates changes in the internal ion behavior that are dependent on electrolyte concentrations and pave the way for durable AZMBs.

Toward Sustainable All Solid-State Li-Metal Batteries: Perspectives on Battery Technology and Recycling Processes

Lithium (Li)-based batteries are gradually evolving from the liquid to the solid state in terms of safety and energy density, where all solid-state Li-metal batteries (ASSLMBs) are considered the most promising candidates. This is demonstrated by the Bluecar electric vehicle produced by the Bolloré Group, which is utilized in car-sharing services in several cities worldwide. Despite impressive progress in the development of ASSLMBs, their avenues for recycling them remain underexplored, and combined with the current explosion of spent Li-ion batteries, they should attract widespread interest from academia and industry. Here, the potential challenges of recycling ASSLMBs as compared to Li-ion batteries are analyzed and the current progress and prospects for recycling ASSLMBs are summarized and analyzed. Drawing on the lessons learned from Li-ion battery recycling, it is important to design sustainable recycling technologies before ASSLMBs gain widespread market adoption. A battery-recycling-oriented design is also highlighted for ASSLMBs to promote the recycling rate and maximize profitability. Finally, future research directions, challenges, and prospects are outlined to provide strategies for achieving sustainable development of ASSLMBs.

Biofluid-Activated Biofuel Cells, Batteries, and Supercapacitors: A Comprehensive Review

Recent developments in wearable and implanted devices have resulted in numerous, unprecedented capabilities that generate increasingly detailed information about a user's health or provide targeted therapy. However, options for powering such systems remain limited to conventional batteries which are large and have toxic components and as such are not suitable for close integration with the human body. This work provides an in-depth overview of biofluid-activated electrochemical energy devices, an emerging class of energy sources judiciously designed for biomedical applications. These unconventional energy devices are composed of biocompatible materials that harness the inherent chemistries of various biofluids to produce useable electrical energy. This work covers examples of such biofluid-activated energy devices in the form of biofuel cells, batteries, and supercapacitors. Advances in materials, design engineering, and biotechnology that form the basis for high-performance, biofluid-activated energy devices are discussed. Innovations in hybrid manufacturing and heterogeneous integration of device components to maximize power output are also included. Finally, key challenges and future scopes of this nascent field are provided.

Thermally insulating and fire‐retardant bio‐mimic structural composites with a negative Poisson's ratio for battery protection

Battery safety has attracted considerable attention worldwide due to the rapid development of wearable electronics and the steady increase in the production and use of electric vehicles. As battery failures are often associated with mechanical‐thermal coupled behaviors, protective shielding materials with excellent mechanical robustness and flame‐retardant properties are highly desired to mitigate thermal runaway. However, most of the thermal insulating materials are not strong enough to protect batteries from mechanical abuse, which is one of the most critical scenarios with catastrophic consequences. Here, inspired by wood, we have developed an effective approach to engineer a hierarchical nanocomposite via self‐assembly of calcium silicate hydrate and polyvinyl alcohol polymer chains (referred as CSH wood). The versatile protective material CSH wood demonstrates an unprecedented combination of light weight (0.018 g cm−3), high stiffness (204 MPa in the axial direction), negative Poisson's ratio (−0.15), remarkable toughness (6.67 × 105 J m−3), superior thermal insulation (0.0204 W m−1 K−1 in the radial direction), and excellent fire retardancy (UL94‐V0). When applied as a protective cover or a protective layer within battery packages, the tough CSH wood can resist high‐impact load and block heat diffusion to block or delay the spread of fire, therefore significantly reducing the risk of property damage or bodily injuries caused by battery explosions. This work provides new pathways for fabricating advanced thermal insulating materials with large scalability and demonstrates great potential for the protection of electronic devices.

Fundamentals, status and challenges of direct recycling technologies for lithium ion batteries

Advancement in energy storage technologies is closely related to social development. However, a significant conflict has arisen between the explosive growth in battery demand and resource availability. Facing the upcoming large-scale disposal problem of spent lithium-ion batteries (LIBs), their recycling technology development has become key. Emerging direct recycling has attracted widespread attention in recent years because it aims to 'repair' the battery materials, rather than break them down and extract valuable products from their components. To achieve this goal, a profound understanding of the failure mechanisms of spent LIB electrode materials is essential. This review summarizes the failure mechanisms of LIB cathode and anode materials and the direct recycling strategies developed. We systematically explore the correlation between the failure mechanism and the required repair process to achieve efficient and even upcycling of spent LIB electrode materials. Furthermore, we systematically introduce advanced in situ characterization techniques that can be utilized for investigating direct recycling processes. We then compare different direct recycling strategies, focussing on their respective advantages and disadvantages and their applicability to different materials. It is our belief that this review will offer valuable guidelines for the design and selection of LIB direct recycling methods in future endeavors. Finally, the opportunities and challenges for the future of battery direct recycling technology are discussed, paving the way for its further development.

Covalent Organic Frameworks in Aqueous Zinc-Ion Batteries

The development and utilization of green renewable energy are imperative with the aggravation of environmental pollution and energy crisis. In recent years, the exploration of electrochemical energy storage systems has gradually become a research hotspot in energy. Among them, aqueous zinc-ion batteries (ZIBs) have progressively developed into highly competitive and efficient energy storage devices owing to their inherent safety, natural abundance, and higher theoretical capacity. However, the practical application of ZIBs suffers from the limitation of challenges such as the absence of proper cathode materials and the unavoidable zinc dendrites and side reactions of Zn anode. Covalent organic frameworks (COFs) are an attractive class of electrode materials due to their inherent advantages, like structural designability, high stability, and ordered-open channels, bestowing them with great potential to overcome the problems of ZIBs. In this review, we concentrate on the discussion of designed strategies of COFs applied to ZIBs. Furthermore, the methods of using COFs to solve the challenging problems of cathode development, anode modification, and electrolyte optimization for ZIBs are summarized. Finally, the existing difficulties, solution measures, and prospects of COFs for ZIBs applications are discussed. Our commentary hopes to serve as a valuable reference for developing COFs-based ZIBs.

High-Safety Lithium-Ion Batteries with Silicon-Based Anodes Enabled by Electrolyte Design

High-energy-density lithium-ion batteries (LIBs) with high safety have long been pursued for extending the cruise range of electric vehicles. Owing to the high gravimetric capacity, silicon is a promising alternative to the convention graphite anode for high-energy LIBs. However, it suffers from intrinsic poor interfacial stability with liquid electrolytes, inevitably increasing the risk of thermal runaway and posing serious safety challenges. In this review, we will focus on mitigating thermal runaway of silicon anodes-based LIBs from the perspective of electrolyte design. First, the thermal runaway mechanism of LIBs is briefly introduced, while the specific thermal failure reactions associated with silicon anodes and electrolytes are discussed in detail. We then summarize the safety countermeasures (e. g., thermally stable solid electrolyte interphase, nonflammable electrolytes, highly stable lithium salts, mitigating electrode crosstalk, and solid-state electrolytes) enabled by customized electrolyte design to address these triggers of thermal runaway. Finally, the remaining unanswered questions regarding the thermal runaway mechanism are presented, and future directions to achieve intrinsically safe electrolytes for silicon-based anodes are prospected. This review is expected to provide insightful knowledge for improving the safety of LIBs with silicon-based anodes.

Trend of Developing Aqueous Liquid and Gel Electrolytes for Sustainable, Safe, and High-Performance Li-Ion Batteries

Current lithium-ion batteries (LIBs) rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity. The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern. Water-based (aqueous) electrolytes have been receiving attention as an alternative to organic electrolytes. However, a narrow electrochemical-stability window, water decomposition, and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes. Therefore, developing novel aqueous electrolytes for sustainable, safe, high-performance LIBs remains challenging. This Review first commences by summarizing the roles and requirements of electrolytes-separators and then delineates the progression of aqueous electrolytes for LIBs, encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes. These aqueous electrolytes are progressed based on strategies using superconcentrated salts, concentrated diluents, polymer additives, polymer networks, and artificial passivation layers, which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes. In addition, this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte-electrode interfaces. A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.

Li, Na, K, Mg, Zn, Al, and Ca Anode Interface Chemistries Developed by Solid-State Electrolytes

Solid-state batteries (SSBs) have received significant attention due to their high energy density, reversible cycle life, and safe operations relative to commercial Li-ion batteries using flammable liquid electrolytes. This review presents the fundamentals, structures, thermodynamics, chemistries, and electrochemical kinetics of desirable solid electrolyte interphase (SEI) required to meet the practical requirements of reversible anodes. Theoretical and experimental insights for metal nucleation, deposition, and stripping for the reversible cycling of metal anodes are provided. Ion transport mechanisms and state-of-the-art solid-state electrolytes (SEs) are discussed for realizing high-performance cells. The interface challenges and strategies are also concerned with the integration of SEs, anodes, and cathodes for large-scale SSBs in terms of physical/chemical contacts, space-charge layer, interdiffusion, lattice-mismatch, dendritic growth, chemical reactivity of SEI, current collectors, and thermal instability. The recent innovations for anode interface chemistries developed by SEs are highlighted with monovalent (lithium (Li+ ), sodium (Na+ ), potassium (K+ )) and multivalent (magnesium (Mg2+ ), zinc (Zn2+ ), aluminum (Al3+ ), calcium (Ca2+ )) cation carriers (i.e., lithium-metal, lithium-sulfur, sodium-metal, potassium-ion, magnesium-ion, zinc-metal, aluminum-ion, and calcium-ion batteries) compared to those of liquid counterparts.

Revealing Phase Transition in Ni-Rich Cathodes via a Nondestructive Entropymetry Method

With the expanding requirements of recent energy regulations and economic interest in high-performance batteries, the need to improve battery energy density and safety has gained prominence. High-energy-density lithium batteries, employed in next-generation energy storage devices, rely on nickel-rich cathode materials. Since they have extremely high charge/discharge capacity, high operating voltage, prolonged cycle life, and lower cost, nickel-rich cathode materials such as Ni-rich NCM (LiNix > 0.8CoyMnzO2) and Ni-rich NCA (LiNix > 0.8CoyAlzO2) are of particular interest to researchers. Several in situ characterization methodologies are currently used to understand lithium-ion battery electrode response and deterioration better. Nevertheless, in many contexts, these measurement methodologies must be combined with specially designed cells and electrode materials with distinct forms, which is sometimes inconvenient. As an alternative, thermo-voltammetric dynamic characterization may be utilized to describe the thermal internal characteristics of various electrode materials, such as the structural changes and electrode reactions that occur during charging and discharging. In this paper, a nondestructive entropy measurement method demonstrates that phase change occurs for NCM (LiNi0.83Co0.12Mn0.05O2) and NCA (LiNi0.88Co0.09Al0.03O2) at 40-30% of state of charge (SOC) and 90-80% of SOC, respectively. This is confirmed by ex situ X-ray diffraction (XRD) measurements for these highly popular cathodes.

Prussian Blue-Type Sodium-ion Conducting Solid Electrolytes for All Solid-State Batteries

Conventional solid electrolyte frameworks typically consist of anions such as sulphur, oxygen, chlorine, and others, leading to inherent limitations in their properties. Despite the emergence of sulphide, oxide, and halide-based solid electrolytes for all-solid-state batteries, their utilization is hampered by issues, including the evolution of H2 S gas, the need for expensive elements, and poor contact. Here, we first introduce Prussian Blue analogue (PBA) open-framework structures as a solid electrolyte that demonstrates appreciable Na+ conductivity (>10-2 mS cm-1 ). We delve into the relationship between Na+ conductivity and the lattice parameter of N-coordinated transition metal, which is attributed to the reduced interaction between Na+ and the framework, corroborated by the distribution of relaxation times and density functional theory calculations. Among the five PBAs studied, Mn-PBA have exhibited the highest Na+ conductivity of 9.1×10-2 mS cm-1 . Feasibility tests have revealed that Mn-PBA have maintained a cycle retention of 95.1 % after 80cycles at 30 °C and a C-rate of 0.2C. Our investigation into the underlying mechanisms that play a significant role in governing the conductivity and kinetics of these materials contributes valuable insights for the development of alternative strategies to realize all-solid-state batteries.

Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries

Solid polymer electrolytes (SPEs) are the key components for all-solid-state lithium metal batteries with high energy density and intrinsic safety. However, the low lithium ion transference number (t+) of a conventional SPE and its unstable electrolyte/electrode interface cannot guarantee long-term stable operation. Herein, asymmetric trihalogenated aromatic lithium salts, i.e., lithium (3,4,5-trifluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFFF) and lithium (4-bromo-3,5-difluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFBF), are synthesized for polymer electrolytes. They exhibit higher t+ values and better compatibility with Li metal than conventional lithium bis(trifluoromethanesulfonyl) imide (LiTFSI). Due to the trihalogenated aromatic anions, LiFFF- and LiFBF-based electrolytes are prone to generate an LiF- and LiBr-rich solid electrolyte interphase (SEI), therefore increasing the stability of the solid electrolyte/anode interface. Particularly, LiFBF could induce a LiF/LiBr hybrid SEI, where LiF shows a high Young's modulus and high surface energy for homogenizing Li ion flux and LiBr exhibits an extremely low Li ion diffusion barrier in the SEI layer. As a result, the Li/Li symmetric cells could remain stable for more than 1200 h without a short circuit and the LiFePO4/Li batteries showed superb electrochemical performance over 1200 cycles at 1 C. This work provides valuable insights from the perspective of lithium salt molecular structures for high-performance all-solid-state lithium metal batteries.

Polyethylene Oxide (PEO) Provides Bridges to Silica Nanoparticles to Form a Shear Thickening Electrolyte for High Performance Impact Resistant Lithium-ion Batteries

The development of shear thickening electrolytes is proving to be pivotal in the quest for impact resistant lithium-ion batteries (LIBs). However, the high viscosity and poor stability associated with the need for high filler content has to date impeded progress. Here, this work reports a new type of polymer-bridged shear thickening electrolyte that overcomes these shortcomings, by utilizing the interaction between polymer chains and silica nanoparticles. The incorporation of polyethylene oxide (PEO) facilitates hydrocluster formation providing impact resistance with a filler content as low as 2.2 wt%. This low viscosity electrolyte has a high ionic conductivity of ≈5.1 mS cm-1 with excellent long-term stability, over 30 days. The effectiveness of this electrolyte in LIBs is demonstrated by excellent electrochemical performance and high impact resistance.

Burnt by His Cellphone During a Parachute Jump

BACKGROUND: Many current cell phone (mobile phone, smartphone) batteries are lithium-ion. These batteries can overheat and catch fire under certain conditions. If it happens during a flight or air activity, this might compromise aviation safety. We report a case of a man whose phone caught fire during a parachute jump.CASE REPORT: The individual, a member of Police Special Forces, is required to regularly perform parachute jumps. During the incident flight, the man had a cell phone in a pocket that ignited during the jump. He was able to land and then extract the phone with burns requiring acute medical care and later a skin graft.DISCUSSION: This is a cautionary tale of lithium-ion batteries in flight. Many other situations could also occur with these batteries. There is little medical documentation of the risk of fire with lithium-ion batteries causing injuries during flight operations. To reduce the risk of fire, the devices should be powered down and phones should not be worn directly touching the skin. Damaged devices are more prone to overheating.des Robert V, Saint-Jean L, Corcostegui S-P, Romary E, and Derkenne C. Burnt by his cellphone during a parachute jump. Aerosp Med Hum Perform. 2023; 94(10):792-795.

Flexible Self-Powered Energy Systems Based on H2 O/Ni2+ Intercalated Nix V2 O5 ⋅ nH2 O

The development of portable electronic devices has created greater demands for multifunctional energy integration systems. Self-powered systems have gained widespread interest because they can collect and storage renewable environmental energy and provide stable electricity to electronic devices. Herein, we developed a flexible self-charging energy system, involving textile-based zinc-ion hybrid (ZIHC) and triboelectric nanogenerator (TENG), which demonstrates wearable, compatibility, lightweight and can quickly harvest and store energy. Nix V2 O5  ⋅ nH2 O (NVO) loaded on carbon cloth (CC) with Ni2+ /H2 O ions intercalated as the cathode was assembled with activated CC to form a ZIHC, which has a voltage range of 2.0 V and capacitance value of 267.1 mF cm-2 as well as good charge and discharge rates and excellent cycling stability. At the same time, the NVO/CC can be assembled with PDMS to form a TENG achieving a maximum instantaneous power of 18.5 mW cm-2 . The device can be flexibly worn over the body to continuously harvest and store biomechanical energy and charge the electronic wristwatch successfully. This work demonstrates great convenience and promising practical applications as sustainable flexible energy system for portable electronic devices.