Optical switching and image storage by means of azobenzene liquid-crystal films

Continuous flow synthesis of azobenzenes via Baeyer–Mills reaction

Azobenzene, as one of the most prominent molecular switches, is featured in many applications ranging from photopharmacology to information or energy storage. In order to easily and reproducibly synthesize non-symmetric substituted azobenzenes in an efficient way, especially on a large scale, the commonly used Baeyer–Mills coupling reaction was adopted to a continuous flow setup. The versatility was demonstrated with a scope of 20 substances and the scalability of this method exemplified by the synthesis of >70 g of an azobenzene derivative applied in molecular solar thermal storage (MOST) systems.

Cooperative light-induced breathing of soft porous crystals via azobenzene buckling

Although light is a prominent stimulus for smart materials, the application of photoswitches as light-responsive triggers for phase transitions of porous materials remains poorly explored. Here we incorporate an azobenzene photoswitch in the backbone of a metal-organic framework producing light-induced structural contraction of the porous network in parallel to gas adsorption. Light-stimulation enables non-invasive spatiotemporal control over the mechanical properties of the framework, which ultimately leads to pore contraction and subsequent guest release via negative gas adsorption. The complex mechanism of light-gated breathing is established by a series of in situ diffraction and spectroscopic experiments, supported by quantum mechanical and molecular dynamic simulations. Unexpectedly, this study identifies a novel light-induced deformation mechanism of constrained azobenzene photoswitches relevant to the future design of light-responsive materials.

Modifying electron injection kinetics for selective photoreduction of nitroarenes into cyclic and asymmetric azo compounds

Modifying the reactivity of substrates by encapsulation is essential for microenvironment catalysts. Herein, we report an alternative strategy that modifies the entry behaviour of reactants into the microenvironment and substrate inclusion thermodynamics related to the capsule to control the electron injection kinetics and the selectivity of products from the nitroarenes photoreduction. The strategy includes the orchestration of capsule openings to control the electron injection kinetics of electron donors, and the capsule’s pocket to encapsulate more than one nitroarene molecules, facilitating a condensation reaction between the in situ formed azanol and nitroso species to produce azo product. The conceptual microenvironment catalyst endows selective conversion of asymmetric azo products from different nitroarenes, wherein, the estimated diameter and inclusion Gibbs free energy of substrates are used to control and predict the selectivity of products. Inhibition experiments confirm a typical enzymatic conversion, paving a new avenue for rational design of photocatalysts toward green chemistry.

Shape Permanence in Diarylethene-Functionalized Liquid-Crystal Elastomers Facilitated by Thiol-Anhydride Dynamic Chemistry

Diarylethene-functionalized liquid-crystalline elastomers (DAE-LCEs) containing thiol-anhydride bonds were prepared and shown to undergo reversible, reprogrammable photoinduced actuation. Upon exposure to UV light, a monodomain DAE-LCE generated 5.5 % strain. This photogenerated strain was demonstrated to be optically reversible over five cycles of alternating UV/Visible light exposure with minimal photochrome fatigue. The incorporation of thiol-anhydride dynamic bonds allowed for retention of actuated states. Further, re-programming of the nematic director was achieved by heating above the temperature for bond exchange to occur (70 °C) yet below the nematic-to-isotropic transition temperature (100 °C) such that order was maintained between mesogens. The observed thermal stability of each of the diarylethene isomers of over 72 h allowed for decoupling of photo-induced processes and polymer network effects, showing that both polymer relaxation and back-isomerization of the diarylethene contributed to LCE relaxation over a period of 12 hours after actuation unless bond exchange occurred.

Real-Time, Time-Dependent Density Functional Theory Study on Photoinduced Isomerizations of Azobenzene Under a Light Field

The trans to cis photoisomerization of azobenzene and its reverse (i.e., the cis to trans) processes are studied using real-time propagation time-dependent density functional theory combined with molecular dynamics for ions. We show that the wavelength of the applied laser may significantly affect the transition process. The simulations also show that the photon-excited electrons play essential roles in the isomerization processes, in which the hot electrons couple to phonon modes that drive the transitions.

A DFT study on the isomerization mechanism of azobenzene derivatives on silicon substrates

The cis–trans isomerization mechanism of azobenzenesulfonamide derivatives on silicon substrates was investigated using DFT. The most favorable cooperative mode of the N2 inversion of the L followed by the N1 inversion of the R was proposed.

Photoresponsive nanostructures of azobenzene-containing block copolymers at solid surfaces

An azobenzene-containing block copolymer self-assembled into island-like nanostructures. The island-like nanostructures fused into chain-like nanostructures under UV irradiation based on photoinduced solid-to-liquid transitions at the nanoscale.

Research Progress of Photo-/Electro-Driven Thermochromic Smart Windows

Thermochromic smart windows can automatically control solar radiation according to the ambient temperature. Compared with photochromic and electrochromic smart windows, they have a stronger applicability and lower energy consumption, and have a wide range of application prospects in the field of building energy efficiency. At present, aiming at the challenge of the high transition temperature of thermochromic smart windows, a large amount of innovative research has been carried out via the principle that thermochromic materials can be driven to change their optical performance by photothermal or electrothermal effects at room temperature. Based on this, the research progress of photo- and electro-driven thermochromic smart windows is summarized from VO₂-based composites, hydrogels and liquid crystals, and it is pointed out that there are two main development trends of photo-/electro-driven thermochromic smart windows. One is exploring the diversified combination methods of photothermal materials and thermochromic materials, and the other is developing low-cost large-area heating electrodes.

Engineering Achiral Liquid Crystalline Polymers for Chiral Self-Recovery

Flexible construction of permanently stored supramolecular chirality with stimulus-responsiveness remains a big challenge. Herein, we describe an efficient method to realize the transfer and storage of chirality in intrinsically achiral films of a side-chain polymeric liquid crystal system by combining chiral doping and cross-linking strategy. Even the helical structure was destroyed by UV light irradiation, the memorized chiral information in the covalent network enabled complete self-recovery of the original chiral superstructure. These results allowed the building of a novel chiroptical switch without any additional chiral source in multiple types of liquid crystal polymers, which may be one of the competitive candidates for use in stimulus-responsive chiro-optical devices.

Multistage Reversible Tg Photomodulation and Hardening of Hydrazone-Containing Polymers

The glass transition temperature (T_g) of a series of polyacrylate- and polymethacrylate-based polymers having bistable hydrazone photoswitches as pendants increases upon photoisomerization. The ensuing photohardening of the polymeric network was corroborated using nanoindentation measurements. The bistability of the switch allowed us to lock-in and sustain multiple T_g values in the same polymeric material as a function of the hydrazone switch's Z/E isomer ratio, even at elevated temperatures.

Mesomeric Effects of Azobenzene Bearing Natural Product-Based Molecules for Liquid Crystal Materials: An Overview

Latest progress in the liquid crystal (LC) field related to azo molecules incorporated into natural product- based moieties for the improvement of LC texture and mesomeric phases has received great interest among researchers. A LC containing natural product-based moieties i.e. menthol, kojic acid, cholesterol and chalcone with stable azo and azobenzene scaffolds with specific optical tunability, has been widely used in photo-active materials such as Liquid Crystal Display (LCD), LC films, smart windows and other devices. This review discusses the influence of azobenzene, a renowned photo-responsive and stable LC scaffold, in mesogenic phases due to photo-isomerization and optical switching. The incorporation of mesomeric phases of natural product moieties to azo molecules has improved the properties of LC, i.e, from the nematic phase to the smectic phase with proper magnetic field alignment. Natural product-based LC can be useful in numerous applications, especially practical electronic or optic devices such as optical image storage, display devices, solar cells, optical switching.

Photohardenable Pressure-Sensitive Adhesives using Poly(methyl methacrylate) containing Liquid Crystal Plasticizers

Hardenable pressure-sensitive adhesives, which show pressure-sensitive adhesion state with weak adhesion strength in their initial semisolid state and general adhesion state with strong adhesion strength in their hardened state, are desirable in various industrial fields to improve efficiency of manufacturing and recycling products. Here we developed novel photohardenable pressure-sensitive adhesives triggered by photoplasticization of poly(methyl methacrylate) containing photoresponsive liquid crystal (nematic and smectic E) plasticizers at various ratios. It was found that photoplasticization, which is the photoinduced reduction of glass transition temperature and hardness of polymers, could be repeatedly induced by alternate irradiation with ultraviolet (UV) and visible (Vis) light in all mixtures, regardless of the phase structures of the photoresponsive plasticizers. Upon photoplasticization under UV-light irradiation, all mixtures exhibited glassy-to-rubbery transition to a pressure-sensitive adhesion state under appropriate conditions. Upon irradiation of the photoplasticized samples with Vis light, the samples recovered their initial hardened state, recovering the glassy nature with elastic moduli. The adhesion strength of the samples in the hardened state was significantly influenced by the phase structures of the plasticizers. When a photoresponsive plasticizer exhibited the smectic E phase, which is a highly ordered liquid-crystalline phase, the adhesion strength was remarkably larger than those of the case using the plasticizers showing nematic and crystalline phases. This result was reasonably explained in terms of the suppressed bleed-out of the photoresponsive plasticizers from the polymer and the good mechanical properties of the mixture stemming from the characteristics of the smectic E phase. Furthermore, through the reversibility of a photoplasticization process, we achieved a photoinduced reduction of the adhesion strength by UV irradiation of the samples in the hardened state. Photohardenable pressure-sensitive adhesives with reversibility has been developed using a commodity plastic just by adding the photoresponsive plasticizer showing the smectic E phase.

Transfer, Amplification, Storage, and Complete Self-Recovery of Supramolecular Chirality in an Achiral Polymer System

Supramolecular chirality and its complete self-recovery ability are highly mystical in nature and biological systems, which remains a major challenge today. Herein, we demonstrate that partially cross-linked azobenzene (Azo) units can be employed as the potential chiral trigger to fully heal the destroyed helical superstructure in achiral nematic polymer system. Combining the self-assembly of Azo units and terminal hydroxyl groups in polymer side chains allows the vapor-induced chiral nematic phase and covalent fixation of the superstructure via acetal reaction. The induced helical structure of Azo units can be stored by inter-chain cross-linking, even after removal of the chiral source. Most interestingly, the stored chiral information can trigger perfect chiral self-recovery (CSR) behavior after being destroyed by UV light, heat, and solvents. The results pave a new way for producing novel chiroptical materials with reversible chirality from achiral sources.

Optimization of the photo-orientation rate of an azobenzene-containing polymer based on a kinetic model of photoinduced ordering

The explicit dependence of the rate of photoinduced ordering (photo-orientation) of an azobenzene-containing liquid-crystalline polymer on the photostationary concentration of cis-azobenzene has been predicted theoretically and found experimentally. The employed kinetic model based on the photoinduced rearrangement of the domain structure of a liquid-crystalline material predicts the maximum rate of photo-orientation at ca. 50% content of the cis-isomer in the photostationary state of irradiation. For experimental fine tuning of the photostationary trans-cis ratio, the simultaneous irradiation of material with two beams of light with different wavelengths was employed. The excellent agreement of theory and experiment indicates that the difference of photostationary fractions of cis-azobenzene fragments in adjacent domains of different orientations is the driving force of photoinduced ordering.

Active Ester Functionalized Azobenzenes as Versatile Building Blocks

Azobenzenes are important molecular switches that can still be difficult to functionalize selectively. A high yielding Pd-catalyzed cross-coupling method under mild conditions for the introduction of NHS esters to azobenzenes and diazocines has been established. Yields were consistently high with very few exceptions. The NHS functionalized azobenzenes react with primary amines quantitatively. These amines are ubiquitous in biological systems and in material science.

Tautomeric influence on the photoinduced birefringence of 4-substituted phthalimide 2-hydroxy Schiff bases in PMMA matrix

The photoinduced birefringence of two 4-substituted phthalimide 2-hydroxy Schiff bases, containing salicylic (4) and 2-hydroxy-1-naphthyl (5) moieties has been investigated in PMMA matrix. Their optical behaviour as nanocomposite films was revealed by combined use of DFT quantum chemical calculations (in ground and excited state) and experimental optical spectroscopy (UV-Vis and fluorescence). The results have shown that solid-state reversible switching takes place by enol/keto tautomerization and Z/E isomerization. Birefringence study was performed in the PMMA nanocomposite films using pump lasers at λ_rec = 355 nm and λ_rec = 442 nm. Fast response time and high stability of anisotropy up to 58% for (4) and 95% for (5) after turning off the excitation laser, was observed, which makes these materials appropriate candidates for cutting-edge optical information technology materials. The possibility for multiple cycles of recording, reading and optical erasure of the photoinduced birefringence at λ_rec = 442 nm in 5 has been demonstrated. The obtained results have shown that the maximum value of the measured birefringence is close to the anisotropic characteristics of the most frequently used azo materials.

Application of terahertz spectroscopy on monitoring crystallization and isomerization of azobenzene

Terahertz spectroscopy provides a powerful and informative link between infrared spectroscopy and microwave spectroscopy, and is now beginning to make its transition from initial development to broader use by chemists, materials scientists and biologists. In this study, utilizing terahertz spectroscopy we monitored the crystallization and isomerization of azobenzene. In flash-frozen trans-azobenzene solutions, the processes of crystallization and phase transition were observed. A new phase has been experimentally confirmed to exist stably at low temperatures. The results on gradual-frozen experiment indicate that the formation of the observed new phase is determined by the cooling rate. Besides, based on the distinctive spectral features of the isomers, the thermal- and photo-induced isomerization processes of azobenzene were investigated. This work presents that the terahertz spectroscopy has a great potential to study the phase transitions and crystallization of liquid samples under different freezing conditions.

Photoisomerization-induced patterning of ion-pairing materials based on anionic azobenzene and its complex with a fluorescent π-electronic system

Large mass transport driven by the difference in the photoisomerization-induced surface tension was demonstrated in ion pairs of anionic azobenzene and a cationic polymer. This material motion enabled fluorescence patterning using a trace amount of photoisomerized azobenzenes in complex form with a π-electronic system.

Emission Switching in the Near-Infrared by Reversible Trans-Cis Photoisomerization of Styrylbenzene-Conjugated Osmium Terpyridine Complexes

A new array of homoleptic osmium(II) complexes based on styrylbenzene-conjugated terpyridine ligands (tpy-pvp-X) were synthesized and their photophysical, electrochemical, and photoisomerization behaviors thoroughly investigated in this work. Both electron-donating and -withdrawing substituents were incorporated onto a tpy-pvp-X (X = H, Me, Cl, NO₂, and Ph) moiety to tune the optical properties and also the rate of photoisomerization behaviors in the complexes. All complexes display strong spin-allowed singlet metal-to-ligand charge-transfer bands in the visible (495-506 nm) and weak singlet ground state to triplet metal-to-ligand charge-transfer (³MLCT) broad bands within the 600-700 nm range. The complexes also exhibit strong phosphorescence emission from their ³MLCT state in the near-infrared domain (737-752 nm) at room temperature with excited-state lifetimes spanning between 107 and 165 ns. Two styrylbenzene units promote reversible trans-trans to trans-cis/cis-cis isomerization induced by light. The rate constants and quantum yields of photoisomerization were found to vary linearly with the Hammett σ_p parameters of the substituents. The rate and quantum yields were also found to decrease with increasing polarity of the solvents. Considerable modulation of the optical behavior along with luminescence switching in the complexes has been achieved upon photoisomerization. Moreover, the optical outputs as a function of two photonic stimuli inputs were used to demonstrate the binary function of a two-input IMPLICATION logic gate. In conjunction with the experimental study, computational investigations were also carried out in all three conformations of the complexes (trans-trans, trans-cis, and cis-cis) to have a perception of their electronic structures and for correct assignment of their absorption and emission spectral bands.

Azobenzene-Based Macrocyclic Arenes: Synthesis, Crystal Structures, and Light-Controlled Molecular Encapsulation and Release

Azobenzene (azo)-based macrocycles are highly fascinating in supramolecular chemistry because of their light-responsiveness. In this work, a series of azo-based macrocyclic arenes 1, 2, 3, and 4, distinguished by the substituted positions of azo groups, is rationally designed and synthesized via a fragment-cyclization method. From the crystal and computed structures of 1, 2, and 3, we observe that the cavity size of these azo-macrocycles decreases gradually upon E→Z photoisomerization. Moreover, light-controlled host-guest complexations between azo-macrocycle 1 and guest molecules (7,7,8,8-tetracyanoquinodimethane, terephthalonitrile) are successfully achieved. This work provides a simple and effective method to prepare azo-macrocycles, and the light-responsive molecular-encapsulation systems in this work may further advance the design and applications of novel photo-responsive host-guest systems.

Investigation of UV-vis spectra of azobenzene containing carboxyl groups

UV-vis spectra of azobenzene containing carboxyl group were investigated by using density functional theory calculations. The calculation results show that substitutions of carboxyl groups have no obvious effect on the coplanarity of azobenzene. Compared with azobenzene, the wavelength of maximum absorption of P-COOH-trans has obvious red shift and the wavelength of maximum absorption of M-COOH-trans has blue shift in UV-vis spectra. In addition, P-COOH and M-COOH were synthesized, and their structures were determined by Fourier transform infrared(FT-IR),and their UV-vis spectra. The calculation results are in good agreement with the experimental data.

Self-Regulation of Infrared Using a Liquid Crystal Mixture Doped with Push-Pull Azobenzene for Energy-Saving Smart Windows

A self-regulating liquid crystal (LC) smart window whose reflectance changes with ambient conditions is demonstrated. Thermally or optically induced switching between the transparent state and a near-infrared (NIR) reflective state can be used for energy-saving windows. Reflection of NIR can reduce the energy used for cooling, while remaining transparent to visible light. By changing the initial alignment of LCs, the window can be switched between hazy-opaque and IR-reflective states to be used for privacy windows.

Exploring Structures and Dynamics of Molecular Assemblies: Ultrafast Time-Resolved Electron Diffraction Measurements

ConspectusMolecular assemblies have been widely applied to functional soft materials in a variety of fields. Liquid crystal is one of the representative molecular soft materials in which weak intermolecular interactions induce its dynamic molecular behavior under external stimuli, such as electric and magnetic fields, photoirradiation, and thermal treatment. It is important to understand molecular behavior and motion in the liquid-crystalline (LC) states at the picosecond level for further functionalization of liquid crystals and molecular assembled materials. For investigation of assembled structures of the materials on the nanometer scale, X-ray diffraction (XRD) measurements have been a powerful tool. Despite the dynamic nature of the assembled materials, however, time resolution of XRD is limited to millisecond due to the response speed of the detector, which hampered real-time observation of the dynamics of the molecular assembly. For further understanding of the dynamic behavior of functional molecules and improvement of performance for their applications, the insights of faster dynamics on the micro-, nano-, pico-, and even femtosecond time scales are required. In this context, the interdisciplinary approaches of the emerging fields of materials chemistry and ultrafast science will open up new aspects of molecular science and technology. These approaches may lead to more effective design of new functional materials, which enables us to control molecular behaviors and motions.The development of ultrashort pulsed X-ray and electron sources has resulted in the visualization of the key structural dynamics on the femto- to picosecond time scale not only in isolated molecules but also in assembled molecules, such as in the LC, crystal, and amorphous phases. We focus on ultrafast phenomena in molecular assemblies induced by photoexcitation. Ultrafast time-resolved electron diffraction measurements are sensitive to the molecular periodicity under photoexcitation, and thus the methodologies directly provide the ultrafast photoinduced molecular dynamic arrangements.In this Account, we describe ultrafast structural dynamics of molecules in the LC phases observed by time-resolved electron diffraction measurements. Photoinduced conformational changes of LC molecules is shown as the example, which is the first observation of LC molecule using time-resolved electron diffraction. It is important to understand the correlation between the conformational or configurational changes induced in a photoirradiated single molecule and the oriented collective motions of molecular assemblies induced by intermolecular interaction. We also show observation of collective motions of azobenzene LC molecules. The collective motions are initiated from photoreaction in a single molecule and are subsequently amplified by the steric interaction with its neighboring molecules.One remaining challenge is to create the platform of materials and sample preparations for time-resolved electron diffraction experiments, which can only be achieved by the interdisciplinary fusion of the fields of materials chemistry and ultrafast science. Time-resolved electron diffraction is a powerful tool for structural investigation of molecular materials with a dynamic nature, whose adaptability goes beyond that of more complex assemblies of carbon nanomaterials. This methodology will extend the possibility to investigate motions of a variety of molecular self-assemblies on a larger scale, for example, to understand responses of biomolecular assemblies and intermolecular chemical reactions.

Nanoporous Films with Photoswitchable Absorption Kinetics Based on Polymerizable Columnar Discotic Liquid Crystals

A photoresponsive nanoporous polymer film has been produced from the templated self-assembly of a columnar liquid crystal containing azo units. A liquid crystalline complex of polymerizable azobenzoic acid and a tris-benzimidazolyl benzene template molecule was cross-linked via thiol-ene radical copolymerization with dodecanedithiol. Subsequent removal of the template yielded nanoporous polymer films with pores of approximately 1 nm in diameter. Both trans-cis and cis-trans photoisomerizations of azobenzoic acid took place in the porous films. At room temperature, the cis isomer was sufficiently long-lived to establish a difference in dye absorption kinetics of the two isomers. The cationic dye rhodamine 6G was bound to both isomers, but the rate of binding to films enriched in the cis isomer was 8 times faster.

The contribution of intermolecular forces to phototropic actuation of liquid crystalline elastomers

Azobenzene-functionalized crystalline elastomers containing a monomer with reduced aromatic content exhibits enhanced phototropic response.

Highly Hydrophobic, Homogeneous Suspension and Resin by Graft Copolymerization Modification of Cellulose Nanocrystal (CNC)

Cellulose nanocrystal (CNC) is a nanoscale colloid with superior potential for coatings, liquid crystal displays, and optoelectronics. However, to date, the presence of hydrophilicity still limits its application. Multifunction via graft copolymerization modification of CNC appears to be breaking into a new direction. In this study, we used the residual hydroxyl groups on the CNC to react with 2-bromoisobu-tyryl bromide, and the initiator was therefore anchored on the CNC surface. Through atom transfer radical polymerization (ATRP), CNC was successfully grafted to azobenzene monomer, i.e., 9-[4-[2-[4-(trifluorometh) phenyl] diazenyl] phenoxy] nonayl acrylate (FAZO). After a series of characterization methods, such as FTIR, NMR and XRD, it was found that the surface water contact angle of the CNC-PFAZO prepared by the modification was as high as 134.4°, and the high hydrophilicity of this material could be maintained for up to one month, even longer.

Spectral Tuning and Photoisomerization Efficiency in Push-Pull Azobenzenes: Designing Principles

This work demonstrates how push–pull substitution can induce spectral tuning toward the visible range and improve the photoisomerization efficiency of azobenzene-based photoswitches, making them good candidates for technological and biological applications. The red-shifted bright ππ* state (S₂) behaves like the lower and more productive dark nπ* (S₁) state because less potential energy along the planar bending mode is available to reach higher energy unproductive nπ*/S₀ crossing regions, which are responsible for the lower quantum yield of the parent compound. The stabilization of the bright ππ* state and the consequent increase in isomerization efficiency may be regulated via the strength of push–pull substituents. Finally, the torsional mechanism is recognized here as the unique productive route because structures with bending values attributable to the inversion mechanism were never detected, out of the 280 ππ* time-dependent density functional theory (RASPT2-validated) dynamics simulations.