The epidemiology of revision total hip arthroplasty in the United States

Is pre-operative block-test with lidocaine injection efficient in predicting the functional result of revision total hip arthroplasty?

BACKGROUND

While performing a hip joint aspiration for culture, a lidocaine diagnostic injection called block test can be performed during the investigation of painful total hip arthroplasties (THA). This test was formerly applied to limited series in pre-operative and without assessing the predictive value on the results of THA revision. Therefore we investigated a consecutive series of THA revisions who underwent pre-operative aspiration-block test to determine if patients with pre-operative positive block test (disappearance of symptoms) have a better clinical improvement after revision.

HYPOTHESIS

The positive pre-operative block test has a positive predictive value greater than 80% in predicting the favourable result of THA revisions.

MATERIALS AND METHODS

We reviewed 152 patients who had a hip aspiration associated with a block test before their THA revision. The patients were evaluated according to the Oxford hip score (OHS). The primary outcome was considered positive if the patient presented an improvement in the OHS greater than the Minimal Clinically Important Difference (MCID; 9 points) and/or if the postoperative OHS was higher than the Patient Acceptable Symptom State (PASS, defined as 39/48).

RESULTS

Block tests were positive for 61.2% (93/152) of patients. The median improvement in the OHS was 23.0 [IQR 16.0; 30.0] if the block test was positive versus 16.0 [IQR 4.0; 17.0] if negative (p = 0.002). The primary outcome after revision was strongly associated with block test positivity (p < 0.0001). The positive block test had a 67.7% sensitivity, 73.3% specificity, 91.4% Positive Predictive Value and 37.3% Negative Predictive Value for significant improvement after revision surgery.

CONCLUSION

Hip joint aspiration for culture with concomitant block test seems to be an interesting tool in predicting outcomes of revision surgery for painful THA.

LEVEL OF EVIDENCE

IV; retrospective study.

Artificial intelligence in planned orthopaedic care

The integration of artificial intelligence (AI) into orthopaedic care has gained considerable interest in recent years, evidenced by the growing body of literature boasting wide-ranging applications across the perioperative setting. This includes automated diagnostic imaging, clinical decision-making tools, optimisation of implant design, robotic surgery, and remote patient monitoring. Collectively, these advances propose to enhance patient care and improve system efficiency. Musculoskeletal pathologies represent the most significant contributor to global disability, with roughly 1.71 billion people afflicted, leading to an increasing volume of patients awaiting planned orthopaedic surgeries. This has exerted a considerable strain on healthcare systems globally, compounded by both the COVID-19 pandemic and the effects of an ageing population. Subsequently, patients face prolonged waiting times for surgery, with further deterioration and potentially poorer outcomes as a result. Furthermore, incorporating AI technologies into clinical practice could provide a means of addressing current and future service demands. This review aims to present a clear overview of AI applications across preoperative, intraoperative, and postoperative stages to elucidate its potential to transform planned orthopaedic care.

Evaluating Alternative Registration Planes in Imageless, Computer-Assisted Navigation Systems for Direct Anterior Total Hip Arthroplasty

(1) Background: Imageless computer navigation systems have the potential to improve the accuracy of acetabular cup position in total hip arthroplasty (THA). Popular imageless navigation methods include locating the patient in a three-dimensional space (registration method) while using a baseline to angle the acetabular cup (reference plane). This study aims to compare the accuracy of different methods for determining postoperative acetabular cup positioning in THA via the direct anterior approach. (2) Methods: Fifty-one participants were recruited. Optical and inertial sensor imageless navigation systems were used simultaneously with three combinations of registration methods and reference planes: the anterior pelvic plane (APP), the anterior superior iliac spine (ASIS) and the table tilt (TT) method. Postoperative acetabular cup position, inclination, and anteversion were assessed using CT scans. (3) Results: For inclination, the mean absolute error (MAE) was lower using the TT method (2.4° ± 1.7°) compared to the ASIS (2.8° ± 1.7°, p = 0.17) and APP method (3.7° ± 2.1°, p < 0.001). For anteversion, the MAE was significantly lower for the TT method (2.4° ± 1.8°) in contrast to the ASIS (3.9° ± 3.2°, p = 0.005) and APP method (9.1° ± 6.2°, p < 0.001). (4) Conclusion: A functional reference plane is superior to an anatomic reference plane to accurately measure intraoperative acetabular cup inclination and anteversion in THA using inertial imageless navigation systems.

Recommendations on the use of restrictions and assistive devices after total hip arthroplasty: an adolopment of guidelines

PURPOSE

Movement restrictions and assistive devices have traditionally been recommended to prevent hip dislocation after total hip arthroplasty (THA). Considering the advancements in THA surgery, a review of treatment recommendations is worthwhile. The aim of this study was to investigate whether unrestricted protocol (without movement restrictions and assistive devices) should be recommended for THA patients.

METHODS

A multiprofessional panel used the GRADE-Adolopment to develop the present recommendations, following the GIN-McMaster-Guideline-Development-Tool. We selected guideline topic and target audience, formulated clinical questions and prioritised outcomes. For the first question, a source guideline was identified and adoloped, whereas the second question required a de-novo recommendation. Therefore, the GRADE-Evidence-Profile and the Evidence-to-Decision framework were completed. Finally, the panel discussed and formulated the final recommendations.

RESULTS

Hip dislocation was defined as critical outcome. No between-groups differences in the early dislocation rates were found: without movement restrictions, 1623 patients, RR 0.44 (CI95 0.16-1.20); without assistive devices, 4426 patients, RR 0.75 (CI95 0.52-1.08). Finally, considering small desirable health effects and trivial undesirable health effects of the intervention, we integrated two "conditional-recommendations" in favour of an unrestricted protocol.

CONCLUSION

Through GRADE-adolopment approach new recommendations to provide an evidence-based guidance after THA have been formulated.

Early adverse outcomes remain challenging to prevent in morbidly obese patients undergoing total hip arthroplasty

Aims

The prevalence of obesity is increasing substantially around the world. Elevated BMI increases the risk of complications following total hip arthroplasty (THA). We sought to evaluate trends in BMI and complication rates of obese patients undergoing primary THA over the last 30 years.

Methods

Through our institutional total joint registry, we identified 15,455 primary THAs performed for osteoarthritis from 1990 to 2019. Patients were categorized according to the World Health Organization (WHO) obesity classification and groups were trended over time. Cox proportional hazards regression analysis controlling for confounders was used to investigate the association between year of surgery and two-year risk of any reoperation, any revision, dislocation, periprosthetic joint infection (PJI), venous thromboembolism (VTE), and periprosthetic fracture. Regression was stratified by three separate groups: non-obese; WHO Class I and Class II (BMI 30 to 39 kg/m2); and WHO Class III patients (BMI ≥ 40 kg/m2).

Results

There was a significant increase in the proportion of all obesity classes from 1990 to 2019, and the BMI values within each WHO class significantly increased over time. Risk of any reoperation did not change over time among non-obese or WHO Class I/II patients, but increased for WHO Class III patients (hazard ratio (HR) 1.04; p = 0.044). Risk of dislocation decreased over time for non-obese (HR 0.96; p < 0.001) and WHO Class I/II (HR 0.96; p = 0.002) patients, but did not change over time for WHO Class III (HR 0.94; p = 0.073) patients. Risks of any revision and PJI did not change over time for any group.

Conclusion

The proportion of patients undergoing THA who are obese has increased dramatically at our institution between 1990 and 2019. Despite BMI values increasing within all WHO classes over time, two-year complication risks have remained stable or decreased in WHO Class I/II patients. However, continued efforts will be required to mitigate risks in the heaviest WHO Class III patients.

Hip contact force pathways in total hip replacement differ between patients and activities of daily living

One of the main causes of implant failure and revision surgery in total hip replacement (THR) is aseptic loosening often caused by the accumulation of wear debris arising between the contact surfaces of the acetabular cup and femoral head during activities of daily living (ADL's). However, limited information is available regarding the contact force pathways between these two surfaces during specific ADL's. In this study, through musculoskeletal modelling, we aimed to estimate the orientation of the hip contact force pathway on the acetabular cup. One hundred and thirty-two THR patients underwent motion capture analysis whilst undertaking locomotor and non-locomotor ADL's. Musculoskeletal simulations were performed to calculate contact force pathways using inverse dynamics analysis. We then qualitatively compared differences in the contact force pathways between patients and between ADL's. Walking resulted in a typical figure-of-eight pattern, with the peak contact forces occurring in the superior-anterior area of the cup. The non-locomotive activities such as stand up, sit down and squat had a more linear shape, spanning across the superior-posterior quarter of the cup. Our results showed a large inter-patient variability in the shape and location of the contact force pathway. There is a distinct difference in the location and shape of the pathway between locomotor and non-locomotor activities and this could result in different wear accumulations. These results could enhance our understanding why revision rates vary across the population and could inform the development of personalised implant design.

Automated design of bone-preserving, insertable, and shape-matching patient-specific acetabular components

Effective treatment of large acetabular defects remains among the most challenging aspects of revision total hip arthroplasty (THA), due to the deficiency of healthy bone stock and degradation of the support columns. Generic uncemented components, which are favored in primary THA, are often unsuitable in revision cases, where the bone-implant contact may be insufficient for fixation, without significant reaming of the limited residual bone. This study presents a computational design strategy for automatically generating patient-specific implants that simultaneously maximize the bone-implant contact area, and minimize bone reaming while ensuring insertability. These components can be manufactured using the same additive manufacturing methods as porous components and may reduce cost and operating-time, compared to existing patient-specific systems. This study compares the performance of implants generated via the proposed method to optimally fitted hemispherical implants, in terms of the achievable bone-implant contact surface, and the volume of reamed bone. Computer-simulated results based on the reconstruction of a set of 15 severe pelvic defects (Paprosky 2A-3B) suggest that the patient-specific components increase bone-implant contact by 63% (median: 63%; SD: 44%; 95% CI: 52.3%-74.0%; RMSD: 42%), and reduce the volume of reamed bone stock by 97% (median: 98%; SD: 4%; 95% CI: 95.9%-97.4%; RMSD: 3.7%).

Self-Reducible Painless and Recurrent Prosthetic Hip Dislocation: A Case Study

Prosthetic hip dislocations following total hip arthroplasty can significantly impact patient quality of life and functional capabilities. Early dislocations typically occur within the first three months post-surgery, while delayed dislocations arise after three months. Notably, patients may experience implant instability and dislocation for years, even decades, after the initial procedure due to a variety of underlying issues. A comprehensive evaluation including patient history, physical examination, and imaging studies is essential for diagnosing delayed dislocations. Reducing prosthetic hip dislocations can be particularly challenging, often necessitating the cooperation of multiple healthcare professionals to perform a series of reduction maneuvers. For this reason, it is surprising when an individual is able to self-reduce a dislocated prosthetic hip. Documenting this instance of self-reduction can foster dialogue among orthopedic surgeons and healthcare providers, ultimately enhancing the management strategies for similar cases in the future. In this study, the case of a 73-year-old male with a six-month history of painless, recurrent prosthetic hip dislocations with self-reduction is detailed. Self-reduction was performed via maneuvers including right lower extremity extension and external rotation. To corroborate the patient's story, multiple X-rays were obtained. These images demonstrated an initially stable right hip prosthesis, followed by evidence of a dislocated femoral implant, and concluded with a reduced hip after self-reduction.  Self-reduction of a prosthetic hip dislocation by a patient is unusual, therefore presenting a unique case. The primary purpose of this case report is to describe this case of self-reduction, increase awareness of this instance, and highlight the importance of obtaining serial imaging to thoroughly identify a potential dislocation.

Are some neutral liners more neutral than others? An ex vivo morphological analysis of acetabular liners classified as "neutral"

BACKGROUND AND PURPOSE

 In contemporary total hip replacement (THR), dislocation is one of the most common complications. At our institution, the cause of an increase in the dislocation rate was recently reported to be reduced head coverage of a newly introduced neutral liner. We therefore aimed to ascertain whether differences exist in articulating head coverage between the various neutral liners used in contemporary THR. A secondary aim was to utilize coverage measurements to develop a new liner coverage classification.

METHODS

 The articulating head coverage of 25 modular neutral polyethylene liners used in 6 uncemented cup designs from 4 major manufacturers was evaluated. The measurements were performed in a metrology laboratory and a mathematical model was developed to calculate coverage of the articulating surfaces. Further, 1 "elevated rim" liner and 1 "face changing liner" were included to develop a new liner coverage classification.

RESULTS

 The articulating head coverage among the studied liners ranged from 167.7° to 194.8°, corresponding to a variation of 27.1°. The variations with different cup and head sizes within each design were smaller (from 1.0° to 5.6°) than those between different designs. Each of the liner designs offered distinct coverage, even though they were all classified as neutral. Based on measurements, a set of descriptive parameters to discriminate different liners in terms of coverage was created.

CONCLUSION

 We showed that all neutral liners are not equal - instead, they clearly varied in terms of their actual coverage design. We suggest our set of descriptive parameters called "hemispheric coverage index values" be used in discriminating the differences in liner coverage.

Influence of hip prosthesis position on postoperative gait in symptomatic hip osteoarthritis secondary to hip dysplasia patients after primary total hip arthroplasty: a short-term follow-up study

BACKGROUND

The aim of this study was to analyze the influence of the positioning of the components of total hip arthroplasty (THA) evaluated by the acetabular anteversion (AA) and femoral anteversion (FA) angle on postoperative gait in patients with symptomatic hip osteoarthritis secondary to hip dysplasia undergoing THA.

METHODS

Between May 2023 and May 2024, patients with symptomatic hip osteoarthritis secondary to hip dysplasia (Crowe Type I and IV) who underwent THA were enrolled in the study. The AA angle and FA angle were measured by computer tomography (CT). Gait data were determined by using the Dynamic Right Gait & Posture analysis system. The relationship between FA, AA and gait data was analyzed by Pearson correlation test, subgroup Pearson correlation test, multiple linear regression.

RESULTS

A total of 40 patients (45hips) were included in the study. Compared with preoperative, the patient's postoperative foot progression angle, foot contact angle, plantarflexion velocity, swing foot speed, gait velocity, cadence, stride length were significantly improved. Preoperative FA is significantly different from postoperative FA (P < 0.05), while the difference between preoperative and postoperative AA is not significant. BMI, Crowe Type, AA were related to change of cadence. The less the postoperative AA of patients, and the more the cadence in the postoperative gait of patients.

CONCLUSION

Our study showed that THA could improve the gait function of patients with symptomatic hip osteoarthritis secondary to hip dysplasia. Adjusting AA lower could obtain a much more postoperative cadence.

Failure Following Revision Total Hip Arthroplasty After Cobalt-Chrome Femoral Heads are Placed on a Retained Femoral Stem

BACKGROUND

Failure due to trunnionosis with adverse local tissue reaction (ALTR) has been reported with cobalt-chrome (CoCr) heads in total hip arthroplasty (THA); however, there are limited data on the use of these heads in the revision setting. The purpose of this study was to analyze the outcomes of patients who underwent revision THA with a retained femoral component and received a CoCr femoral head on a used trunnion.

METHODS

In this retrospective review, we identified all patients who underwent revision THA with a retained femoral component and received a CoCr femoral head between February 2006 and March 2014. Demographic factors, implant details, and postoperative complications, including the need for repeat revisions, were recorded. In total, 107 patients were included (mean age 67 years, 74.0% women). Of the 107 patients, 24 (22.4%) required repeat revisions.

RESULTS

Patients who required repeat revision were younger than those who did not (mean age: 62.9 versus 69, P = .03). The most common indications for repeat revision were instability (8 of 24, 33.3%), ALTR (5 of 24, 20.8%), and infection (4 of 18, 16.7%). Evidence of ALTR or metallosis was identified at the time of reoperation in 10 of the 24 patients who underwent re-revision (41.7%).

CONCLUSIONS

The placement of a new CoCr femoral head on a used trunnion during revision THA with a retained femoral component carries a significant risk of complication (22.4%) and should be avoided when possible.

Unsuspected Positive Intraoperative Cultures in Aseptic Revision Knee Arthroplasty: Prevalence, Management, and Infection-Free Survivorship

BACKGROUND

The purpose of this study was to evaluate the management and outcomes of aseptic revision total knee arthroplasty (arTKA) with unsuspected positive cultures (UPCs) compared to those with sterile cultures.

METHODS

The institutional database at a single tertiary center was retrospectively reviewed for arTKA from January 2013 to October 2023. Patients who met Musculoskeletal Infection Society criteria for periprosthetic joint infection (PJI) based on available preoperative infectious workup, received antibiotic spacers, or did not have at least 1 year of follow-up were excluded. Patients were stratified based on intraoperative cultures into 4 cohorts: sterile cultures, 1 UPC, ≥ 2 UPCs with different organisms, and ≥ 2 UPCs with the same organism. Univariable analyses were used to compare these groups. Kaplan-Meier survivorship analysis assessed infection-free survival at 5 years, and Cox proportional hazards regressions were used to evaluate factors that influence infection-free survival. A total of 691 arTKAs at a mean follow-up of 4.2 years were included in the study. Of these, 49 (7.1%) had 1 UPC with a new organism, 10 (1.4%) had ≥2 UPCs of the same organism, and 2 (0.2%) had ≥2 UPCs with different organisms.

RESULTS

Postoperative antibiotics were prescribed to 114 (16.5%) patients-13 (26.5%) with 1 UPC, 6 (60.0%) with ≥2 UPCs of the same organism, and 0 (0.0%) of patients who had ≥2 UPCs of different organisms. There were no differences in infection-free survival at 5 years between patients who had sterile cultures and 1 UPC (96 versus 89%; P = .39) nor between sterile cultures and ≥2 UPCs of different organisms (96 versus 100%; P < .72). However, patients who had ≥2 UPCs of the same organism had significantly worse infection-free survival at 5 years compared to patients who had sterile cultures (58 versus 96%; P < .001). Cox proportional hazards regression suggested that when adjusting for covariates, an American Society of Anesthesiologists classification of ≥3 (hazard ratio [HR] = 3.1; P = .007), ≥2 UPCs of the same organism (HR = 11.0; P < .001), 1 UPC (HR = 4.2; P = .018), and arTKA with hinge constructs (HR = 4.1; P = .008) were associated with increased risk of rerevision for PJI.

CONCLUSIONS

Patients who had 1 UPC or ≥2 UPCs with different organisms had similar infection-free survival at 5 years as patients who had sterile cultures. However, patients who had ≥2 UPCs of the same organism had significantly worse infection-free survival at 5 years. Overall, 1 UPC or ≥2 UPCs of the same organism at the time of arTKA may suggest the patient is at higher risk of rerevision for PJI. More studies are needed to determine what interventions can be implemented to mitigate this risk.

Evaluating the Diagnostic Utility of Serum Laboratory Studies and Synovial Fluid Analysis in Identifying Periprosthetic Joint Infection in Metal Hip Revisions

Background Metal-on-metal (MoM) bearing surfaces have been implicated as a cause of increased complication rates in total hip arthroplasty (THA), with local and systemic reactions identified. These reactions may cause abnormal laboratory results in common tests that are used to diagnose periprosthetic joint infection (PJI). The purpose of this study was to evaluate the utility of common laboratory studies in the diagnosis of PJI in patients undergoing revision THA with MoM bearings. Methods A retrospective case series of 81 patients undergoing THA revision of MoM bearings from January 2010 to May 2023 at a single institution was performed. Patient data was extracted from the electronic medical record. All patients were evaluated using the 2018 International Consensus Meeting (ICM) definition of PJI. Descriptive statistics were calculated for the clinical characteristics of all patients. Univariate analyses were performed to compare patients who met the ICM criteria for infection with those deemed indeterminate. Results Fifty-one (63.0%) patients were deemed not infected according to ICM criteria, 19 (23.5%) were deemed indeterminate, and 11 (13.6%) were deemed infected. Clinically, four patients had two or more positive cultures and were formally treated for PJI; all patients were deemed inconclusive, and the remaining seven patients deemed infected were clinically treated as not infected, and all remained infection-free. There were significant differences between patients deemed inconclusive and those deemed infected in synovial WBC count (17,539 vs. 90,196 cells/μL, p = 0.049) and synovial polymorphonuclear (PMN) neutrophils (38 vs. 79%, p = 0.002). No other significant differences in laboratory values or outcomes were noted between groups. Conclusions Patients undergoing revision THA with MoM bearings may be more likely to present with a clinical picture that is concerning for infection and may benefit from a more aggressive preoperative workup. The synovial PMN neutrophil percentage may help differentiate between hips that are infected and those that are not.

Intra and Inter-Rater Variability in the Interpretation of White Blood Cell Scintigraphy of Hip and Knee Prostheses

Background: White blood cell (WBC) scintigraphy plays a major role in the diagnostic approach to periprosthetic infections. Although the procedure has been standardized by the publication of several guidelines, the interpretation of this technique may be susceptible to intra and inter-variability. We aimed to assess the reproducibility of interpretation between nuclear medicine physicians and by the same physician and to demonstrate that Cohen's coefficient is more unstable than Gwet's coefficient, as the latter is influenced by the prevalence rates. Methods: We enrolled 59 patients who performed a Technetium-99m WBC (99mTc-WBC) scintigraphy for suspected hip or knee prosthesis infection. Three physicians, blinded to all patient clinical data, performed two image readings. Each WBC study was assessed both visually and semi-quantitatively according to the guidelines of the European Association of Nuclear Medicine (EANM). For semi-quantitative analysis, readers drew an irregular Region of Interest (ROI) over the suspected infectious lesion and copied it to the normal contralateral bone. The mean counts per ROI were used to calculate lesion-to-reference tissue (LR) ratios for both late and delayed images. An increase in LR over time (LRlate> LRdelayed) of more than 20% was considered indicative of infection. Agreement between readers and between readings was assessed by the first-order agreement coefficient (Gwet's AC1). Reading time for each scan was compared between the three readers in both the first and the second reading, using the Generalized Linear Mixed Model. Results: An excellent agreement was found among all three readers: 0.90 for the first reading and 0.94 for the second reading. Both inter- and intra-variability showed values ≥0.86. Gwet's method demonstrated greater robustness than the Cohen coefficient when assessing the intra and inter-rater variability, since it is not influenced by the prevalence rate. Conclusions: These studies can contribute to improving the reliability of nuclear medicine imaging techniques and to evaluating the effectiveness of trainee preparation.

Extended Prophylactic Antibiotics for Primary and Aseptic Revision Total Joint Arthroplasty: A Meta-Analysis

BACKGROUND

There is growing interest in extended antibiotic prophylaxis (EAP) following total joint arthroplasty (TJA); however, the benefit of EAP remains controversial. For this investigation, both oral and intravenous antibiotic protocols were included in the EAP group.

METHODS

The Cochrane Database of Systematic Reviews, Cochrane Register of Controlled Trials, PubMed, MEDLINE, Web of Science, Ovid Embase, Elton B. Stephens CO, and Cumulative Index to Nursing and Allied Health Literature were queried for literature comparing outcomes of primary and aseptic revision total hip arthroplasty (THA) and total knee arthroplasty (TKA) patients who were treated with either ≤24 hours of postoperative antibiotic prophylaxis (standard of care [SoC]) or >24 hours of EAP. The primary outcome was periprosthetic joint infection (PJI). A pooled relative-risk random-effects Mantel-Haenszel model was implemented to compare cohorts.

RESULTS

There were 18 studies with a total of 19,153 patients included. There was considerable variation in antibiotic prophylaxis protocols with first-generation cephalosporins being the most commonly implemented antibiotic for both groups. Patients treated with EAP were 35% less likely to develop PJI relative to the SoC (P = .0004). When examining primary TJA, patients treated with EAP were 39% and 40% less likely to develop a PJI for TJA (P = .0008) and THA (P = .02), respectively. There was no significant difference for primary TKA (P = .17). When examining aseptic revision TJA, EAP led to a 36% and 47% reduction in the probability of a PJI for aseptic revision TJA (P = .007) and aseptic revision TKA (P = .008), respectively; there was no observed benefit for aseptic revision THA (P = .36).

CONCLUSIONS

This meta-analysis demonstrated that patients treated with EAP were less likely to develop a PJI relative to those treated with the SoC for all TJA, primary TJA, primary THA, aseptic revision TJA, and aseptic revision TKA. There was no significant difference observed between EAP and SoC for primary TKA or aseptic revision THA.

Decreased Instability in High-Risk (Hip-Spine 2B) Patients After Modifications of Surgical Planning and Technique

BACKGROUND

Patients undergoing primary total hip arthroplasty (THA) who have spinal deformity and a stiff spine are the highest-risk group for instability. Despite the increasing use of dual-mobility cups and large femoral heads, dislocation remains a major complication after THA. Preoperative planning becomes a critical aspect of ensuring precise component positioning within a safe zone. The purpose of this study was to investigate dislocation rates over a 9-year period.

METHODS

A retrospective review of 4,731 THAs performed by 3 orthopaedic surgeons between January 2014 and March 2023 was performed. Spinopelvic measurements were conducted to determine the hip-spine classification group for each patient. Only patients classified as 2B (pelvic incidence-lumbar lordosis > 10° and Δsacral slope < 10°) were eligible. Both absolute and relative dislocation frequencies were then analyzed using time-series analysis techniques and Fisher's exact tests.

RESULTS

A total of 281 hip-spine 2B patients undergoing primary THA were eligible for analysis (57% women; mean age, range: 66 years, 23 to 87; mean body mass index, range: 28, 16 to 45). The overall dislocation rate was 4.3%. Use of femoral head sizes ≥ 40 mm increased from 4% in 2014 to 2019 to 37% in 2020 to 2023 (P < .001), while the use of dual-mobility cups decreased from 100% in 2014 to 2019 to 37% in 2020 to 2023 (P < .001). Acetabular component planning was changed from the supine plane to the standing plane in February 2020. Those changes in surgical practice were notably correlated with a significant decrease in dislocation rates from 6.8% in 2014 to 2019 to 1.5% in 2020 to 2023 (P = .03).

CONCLUSIONS

Our study demonstrates that the introduction of advanced preoperative THA planning to the standing plane, coupled with precise intraoperative technology for implant placement, can significantly reduce the risk of instability in high-risk THA patients. Notably, we observed a significant decrease in dislocation rates, which aligned with the shift in surgical practice.

LEVEL OF EVIDENCE

IV.

Durability of Primary Total Hip Arthroplasty With Cementless Stems Without a Collar in Elderly Patients Age 75 Years and Over

BACKGROUND

Cementless femoral fixation in total hip arthroplasty (THA) has increased in prevalence worldwide. However, cementless fixation in elderly patients is controversial due to the risks of periprosthetic fracture and aseptic loosening. This study evaluated outcomes in patients undergoing primary THA utilizing a cementless stem without a collar, comparing those less than 75 years to those older than 75 years.

METHODS

Between 2011 and 2021, there were 2,605 cementless THAs performed by 4 surgeons utilizing a highly porous metal fixation surface without a collar and consistent clinical protocols. There were 469 patients who had an age ≥ 75 years. Revision rates, intraoperative fractures, and 90-day mortality were compared between cohorts. In the ≥ 75 year age group, there were more women, more American Society of Anesthesiologists physical status classification III or IV, a lower body mass index, and more kidney disease, osteoporosis, and thyroid disease (P ≤ .002).

RESULTS

All-cause revision rates trended lower for the ≥75 year age group compared to < 75 year (1.9 versus 3.5%, P = .082) at 20-months of follow-up. Moreover, there was no difference in all-cause femoral component revisions comparing ≥ 75 to < 75 year age groups (1.5 versus 2.2%, P = .375), with only 3 of 10 femoral revisions due to aseptic loosening being in the ≥ 75 year age group. Intraoperative fracture (0.2 versus 0.5%, P = .701) and 90-day mortality (0.2 versus 0.1%, P = .460) did not differ between ≥ 75 and < 75 year age groups.

CONCLUSIONS

Older patients had comparable revision rates compared to younger patients using cementless femoral fixation without a collar. Furthermore, there was no difference in 90-day mortality or intraoperative fracture rates. Study findings provide evidence for the safety and durability of cementless THA using collarless femoral stems in elderly patients ≥ 75 years of age.

LEVEL OF EVIDENCE

III.

Reliability of the transverse acetabular ligament as a landmark for functional cup anteversion in total hip arthroplasty

BACKGROUND

The transverse acetabular ligament (TAL) can be a useful and reproducible landmark in the orientation of the acetabular cup in total hip arthroplasty (THA). Its role in guiding cup orientation when aiming to implant in a functional anteversion orientation is unclear. The aim of this study was to assess the relationship between the TAL and the planned acetabular cup anteversion when implanted in a function orientation.

MATERIAL AND METHODS

In a retrospective study the anteversion of the TAL in the contralateral un-replaced hip was measured in CT scans of patients undergoing THA and compared to the functional cup anteversion using the patient-specific spinopelvic parameters. Comparative measurements of the native acetabular version were made from the superior rim to the inferior rim and at 10 mm intervals between the 2, all in reference to the anterior pelvic plane.

RESULTS

96 hips were measured. The mean TAL anteversion angle was 17.2° ± 4.5°. The mean planned acetabular cup anteversion angle was 26.3° ± 4.7°. Pearson's correlation coefficient of this measurement with the TAL was -0.03 (p = 0.769). There was a significant difference between the planned acetabular cup anteversion and the measurement of the TAL (p < 0.0001).

CONCLUSIONS

If cups are implanted parallel to the TAL, almost 80% will be >5° different to targeted functional cup version. It should be aimed to implant cups with more anteversion than the TAL indicates.

Outcomes of Regional Block in Revision Total Joint Arthroplasty for Prosthetic Joint Infection

INTRODUCTION

Infection is among the most common reasons for revision after a total joint arthroplasty (TJA) and is associated with notable morbidity and mortality rates. As the demand for TJA increases, a concurrent increase in the prevalence of periprosthetic joint infection (PJI) is also expected to rise. While previous studies have explored differences in postoperative outcomes between general and spinal anesthesia, there is limited data on the use of regional blocks in patients undergoing revision joint arthroplasty for PJI. This study evaluated the postoperative outcomes of patients undergoing revision TJA for PJI using regional blocks.

METHODS

Data from 518 patients were retrospectively collected. Patients included in the study had undergone revision TJA for PJI from January 2004 to January 2023 at a single institution. Patients undergoing same-day bilateral revisions, above-knee amputations, and aseptic revisions were excluded. Postoperative complications investigated included local complications, postoperative transfusion, wound complication, readmission, sepsis, systemic infection, spinal infection, death, persistent PJI, periprosthetic fracture, and unplanned revision surgery. Chi-square analysis was used to compare postoperative complications between procedures that used spinal or general anesthesia with regional blocks and those with spinal or general anesthesia without regional blocks.

RESULTS

Of the 518 patients who underwent revision TJA, 63 (12.2%) used a regional block. After surgery, 12.7% (n = 8) of patients with regional block and 23.5% (n = 107) of patients without regional block experienced persistent PJI (P = 0.076). No significant differences in wound complication (P = 0.333), readmission (P = 0.998), revision surgery (P = 0.783), and death (P = 0.588) were found between those with and without regional block use. Sepsis (P = 0.224), systemic infection (P = 0.220), and spinal infection (P = 0.998) rates within 1 year after revision TJA for PJI surgery were comparable between the two groups. No local infections were observed at the block site. A subanalysis comparing spinal and general anesthesia demonstrated comparable persistent PJI postoperatively and complication rates; however, spinal anesthesia use was associated with shorter length of stay (P = 0.003) and lower transfusion rates (P = 0.002).

CONCLUSION

The results of this study suggest that the use of regional block is not associated with an increased probability of postoperative persistent PJI, local wound complication, readmission, spinal/systemic/other infections, death, or revision surgery. Surgeons can comfortably choose regional block as a safe option for revision surgery for PJI. Consistent with previous research, patients who received spinal anesthesia had shorter hospital stays and lower transfusion rates when compared with those who received general anesthesia.

AAHKS Surgical Techniques & Technologies Award: Inferior Screw Fixation Decreases Acetabular Component Failure Following Revision Total Hip Arthroplasty

BACKGROUND

Adjunctive screw fixation has been shown to be reliable in achieving acetabular component stability in revision total hip arthroplasty (THA). The purpose of this study was to assess the effect of inferior screw placement on acetabular component failure following revision THA. We hypothesized that inferior screw fixation would decrease acetabular failure rates.

METHODS

We reviewed 250 patients who had Paprosky Type II or III defects who underwent acetabular revision between 2001 and 2021 across three institutions. Demographic factors, the number of screws, location of screw placement (superior versus inferior), use of augments and/or cup-cage constructs, Paprosky classification, and presence of discontinuity were documented. Multivariate regression was performed to identify the independent effect of inferior screw fixation on the primary outcome of aseptic rerevision of the acetabular component.

RESULTS

At a mean follow-up of 53.4 months (range, 12 to 261), 16 patients (6.4%) required re-revision for acetabular loosening. There were 140 patients (56.0%) who had inferior screw fixation, all of whom did not have neurovascular complications during screw placement. Patients who had inferior screws had a lower rate of acetabular rerevision than those who only had superior screw fixation (2.1 versus 11.8%, P = .0030). Multivariate regression demonstrates that inferior screw fixation decreased the likelihood of rerevision for acetabular loosening when compared to superior screw fixation alone (odds ratio: 0.1, confidence interval: 0.03 to 0.5; P = .0071). No other risk factors were identified.

CONCLUSIONS

Inferior screw fixation is a safe and reliable technique to reduce acetabular component failure following revision THA in cases of severe acetabular bone loss.

Femoral Head Penetration Rates and Oxidation of Highly Cross-Linked Polyethylene Hip Liners Implanted More Than 10 Years

BACKGROUND

Highly cross-linked polyethylene (HXLPE) was introduced to improve wear in total hip arthroplasty, with manufacturers implementing different thermal treatments to reduce oxidation. It is important to understand how long-term time in vivo affects the wear of these materials. The purpose of this study was to investigate the wear and oxidative performance of first-generation HXLPE hip inserts implanted for greater than 10 years and compare annealed and remelted HXLPE formulations.

METHODS

There were 49 total hip arthroplasty liners retrieved during routine revision surgery as part of an institutional review board-approved implant retrieval program. Penetration rates for the liners were calculated as the difference between the thickness of the unloaded and loaded regions divided by implantation time. Oxidation indices for the rim, locking mechanism, articulating surface, and backside regions were measured using Fourier-transform infrared spectroscopy according to American Society for Testing and Materials 2102. Mann-Whitney U tests were used to determine the statistical difference between annealed and remelted components.

RESULTS

The cohort had an average implantation time of 13.1 ± 2.6 years for annealed and 12.1 ± 1.7 years for remelted components. The components were revised most often for polyethylene wear, instability, and loosening. The penetration rate averaged 0.0177 ± 0.014 mm/year for annealed components and 0.015 ± 0.022 mm/year for remelted components. Penetration rates did not differ between the remelted and annealed cohorts (P = .28). Oxidation indices were found to be significantly higher in the annealed cohort for all regions of interest (P < .001).

CONCLUSIONS

Oxidation was found to be higher in the annealed HXLPE; however, this does not seem to be associated with greater wear as we found the average penetration rates for the cohorts were low, and the penetration rates were similar between the annealed and remelted cohorts.

Long stem revision versus short stem revision with plate osteosynthesis for Vancouver type B2 periprosthetic femoral fracture: a comparative study of eighty five cases

PURPOSE

Periprosthetic femoral fractures (PPFs) around the hip are challenging complications in orthopaedic surgery, particularly Vancouver type B2 (VTB2) fractures. The surgical management of these fractures is crucial and depends on various factors. Cementless short taper stem with plate osteosynthesis is an alternative surgical technique. This study aims to compare the outcomes of this surgical technique with revision arthroplasty (RA) with long stem in the treatment of VTB2 PPFs.

METHODS

This retrospective study was conducted in a single medical institute from February 2010 to May 2019. Patients who had received either total hip arthroplasty or bipolar hemiarthroplasty and subsequently developed a VTB2 PPF were included; patients who sustained intra-operative fractures or received a cemented stem previously were excluded from the analysis. The patients were divided into two groups: group I received RA with cementless long stem, while group II underwent RA with cementless short taper stem with plate osteosynthesis. Demographic data, radiographic and functional outcomes, and complications were analyzed between the two groups.

RESULTS

A total of 85 patients diagnosed with VTB2 PPFs were included in the study. There were no significant differences between the two groups in terms of demographic data, including age, gender, mean follow-up times, estimated blood loss, and operative times. The radiographic results showed that there was no significant difference in the incidence of subsidence and implant stability between the two groups. However, group II tended to have less subsidence and periprosthetic osteolysis. Patients in group II had significantly better functional scores (mean Harris hip score: post-operative: 60.2 in group I and 66.7 in group ii; last follow-up: 77.4 in group 1 and 83.2 in group II (both p < 0.05)). There were no significant differences in the overall complication rate, including infection, dislocation, re-fracture, and revision surgery, between the two groups.

CONCLUSIONS

Both surgical techniques, cementless long stem and cementless short taper stem with plate osteosynthesis, are effective in the treatment of Vancouver B2 PPFs, with no significant differences in outcomes or complications. However, patients in cementless short taper stem with plate osteosynthesis had better functional scores at both post-operative and the last follow-up.

Performing Revision Arthroplasty Increases Surgeon and Practice Volumes Through the Generation of Subsequent Cases: A Retrospective Study

Background

Revision total knee (TKR) and hip (THR) arthroplasty surgeries are disincentivized due to unfavorable reimbursement rates, surgical times, and complication rates. Our study investigates secondary benefits of performing these surgeries by generating subsequent cases for surgeons and practices.

Methods

Patients undergoing TKR and THR between April 1, 2011, and January 1, 2019, at our tertiary academic institution were analyzed. Patients were identified with Current Procedural Terminology codes for TKR and THR. We calculated a subsequent surgery rate on the same or different joint by the initial surgeon or another surgeon within the practice to determine the procedure yield after initial revision arthroplasty.

Results

One thousand six hundred twenty-five patients met inclusion criteria. Six hundred forty-nine (39.9%) patients received at least one subsequent procedure on any joint by any orthopaedic surgeon in the practice. Four hundred five patients (24.9%) underwent another procedure on any joint by the same surgeon. Two hundred sixty patients (16.0%) underwent another procedure on the same joint by the same surgeon, with 109 cases (41.9%) being a planned second stage of a 2-stage revision for infection. Two hundred eighty-five patients (17.5%) underwent another procedure on a different joint by the same surgeon, with 122 of these patients (42.8%) undergoing at least one primary total hip or knee arthroplasty.

Conclusions

TKRs and THRs can increase surgeon and practice volumes through the generation of future cases, which are primarily the second stage of a 2-stage revision or primary joint arthroplasties on other joints.

Decreased Patellar Fractures and Subluxation With Patellar Component Replacement at Stage-One Spacer

BACKGROUND

Periprosthetic joint infection is a devastating complication of total knee arthroplasty and is often treated with 2-stage revision. We retrospectively assessed whether replacing the patellar component with articulating stage-one spacers was associated with improved outcomes compared to spacers without patellar component replacement.

METHODS

A total of 139 patients from a single academic institution were identified who underwent an articulating stage-one revision total knee arthroplasty and had at least 1-year follow-up. Of the 139 patients, 91 underwent patellar component removal without replacement, while 48 had a patellar component replaced at stage-one revision. Patellar fracture and reinfection at any point after stage-one were recorded. Knee range of motion (ROM), patellar thickness, lateral tilt, and lateral displacement were measured at 6-weeks post stage-one. Chi-square, Fisher's exact, and t-tests were utilized for comparisons. There were no significant demographic differences between groups.

RESULTS

Patellar component replacement at stage-one revision was associated with fewer patellar fractures (2.1 versus 12.1%, P = .046), less lateral patellar displacement (1.7 versus 16.0 mm, P < .01), and improved pre to postoperative knee ROM 6 weeks after stage-one (+5.9 versus -11.4°, P = .03). There was no difference in reinfections after stage-2 revision for the replaced or unreplaced patellar groups (15.4 versus 15%, P = 1.000). While the mean time between stage-one and stage-2 was not different (5.2 versus 4.5 months, P = .50), at one-year follow-up, significantly more patients in the patellar component replacement group were satisfied and refused stage-2 revision (45.8 versus 3.3%, P < .001).

CONCLUSIONS

Replacing the patellar component at stage-one revision is associated with a decreased rate of patellar fracture and lateral patellar subluxation, improved ROM, and possible increased patient satisfaction, as reflected by nearly half of these patients electing to keep their spacer. There was no difference in reinfection rates between the cohorts.

Impact of spinal or epidural anaesthesia on perioperative outcomes in adult noncardiac surgery: a narrative review of recent evidence

Spinal and epidural anaesthesia and analgesia are important anaesthetic techniques, familiar to all anaesthetists and applied to patients undergoing a range of surgical procedures. Although the immediate effects of a well-conducted neuraxial technique on nociceptive and sympathetic pathways are readily observable in clinical practice, the impact of such techniques on patient-centred perioperative outcomes remains an area of uncertainty and active research. The aim of this review is to present a narrative synthesis of contemporary clinical science on this topic from the most recent 5-year period and summarise the foundational scholarship upon which this research was based. We searched electronic databases for primary research, secondary research, opinion pieces, and guidelines reporting the relationship between neuraxial procedures and standardised perioperative outcomes over the period 2018-2023. Returned citation lists were examined seeking additional studies to contextualise our narrative synthesis of results. Articles were retrieved encompassing the following outcome domains: patient comfort, renal, sepsis and infection, postoperative cancer, cardiovascular, and pulmonary and mortality outcomes. Convincing evidence of the beneficial effect of epidural analgesia on patient comfort after major open thoracoabdominal surgery outcomes was identified. Recent evidence of benefit in the prevention of pulmonary complications and mortality was identified. Despite mechanistic plausibility and supportive observational evidence, there is less certain experimental evidence to support a role for neuraxial techniques impacting on other outcome domains. Evidence of positive impact of neuraxial techniques is best established for the domains of patient comfort, pulmonary complications, and mortality, particularly in the setting of major open thoracoabdominal surgery. Recent evidence does not strongly support a significant impact of neuraxial techniques on cancer, renal, infection, or cardiovascular outcomes after noncardiac surgery in most patient groups.

Intraoperative application of three-dimensional printed guides in total hip arthroplasty: A systematic review

BACKGROUND

Acetabular component positioning in total hip arthroplasty (THA) is of key importance to ensure satisfactory post-operative outcomes and to minimize the risk of complications. The majority of acetabular components are aligned freehand, without the use of navigation methods. Patient specific instruments (PSI) and three-dimensional (3D) printing of THA placement guides are increasingly used in primary THA to ensure optimal positioning.

AIM

To summarize the literature on 3D printing in THA and how they improve acetabular component alignment.

METHODS

PubMed was used to identify and access scientific studies reporting on different 3D printing methods used in THA. Eight studies with 236 hips in 228 patients were included. The studies could be divided into two main categories; 3D printed models and 3D printed guides.

RESULTS

3D printing in THA helped improve preoperative cup size planning and post-operative Harris hip scores between intervention and control groups (P = 0.019, P = 0.009). Otherwise, outcome measures were heterogeneous and thus difficult to compare. The overarching consensus between the studies is that the use of 3D guidance tools can assist in improving THA cup positioning and reduce the need for revision THA and the associated costs.

CONCLUSION

The implementation of 3D printing and PSI for primary THA can significantly improve the positioning accuracy of the acetabular cup component and reduce the number of complications caused by malpositioning.

Kinematic analysis of preparation for transferring from wheelchair to bed

This study aimed to clarify the kinematics, particularly of the shoulder and hip joints, during preparation for manual wheelchair-to-bed transfer (i.e. when flipping up the arm and foot supports). This cross-sectional study included 32 able-bodied individuals. The kinematics of the shoulder and hip joints when the arm and foot supports were flipped up of manual wheelchair, were evaluated using a markerless inertial sensor-based motion capture system. We found that flipping the arm support upwards involved a large amount of abduction, internal and external rotation, flexion, and extension at the shoulder joint, whereas flipping the foot support upwards involved a large amount of flexion at the hip joint. The findings suggest that it is necessary to consider the range of motion required to flip up the arm and foot supports of manual wheelchairs, particularly in those with limited shoulder and hip range of motion such as older people, neuromuscular disorders, and orthopedic disorders.

Cementless Total Knee Arthroplasty: Is it Safe in Demineralized Bone?

There is concern for cementless total knee arthroplasty (TKA) in patients with decreased bone mineral density (BMD) due to the potential increase in complications, namely failed in-growth or future aseptic loosening. Some data suggest that advances in cementless prostheses mitigate these risks; however this is not yet born out in long-term registry data. It is crucial to expand our understanding of the prevalence and etiology of osteoporosis in TKA patients, survivorship of cementless implants in decreased BMD, role of bone-modifying agents, indications and technical considerations for cementless TKA in patients with decreased BMD. The purpose of this study is to review current literature and expert opinion on such topics.

A new classification to characterize and predict treatment of acetabular bone defects

BACKGROUND

The increasing amount of revision surgeries in total hip arthroplasty (THA) represents a burden for orthopedic surgeons given the complexity and unpredictability of this kind of surgery. The aim of the current study was to develop a new radiographic classification of acetabular bone defects stratify the severity of the lesion and to suggest the surgical strategy to address it.

METHODS

Radiographs of 151 consecutive patients who underwent acetabular revision surgery in our institution were collected to develop a new classification that groups the acetabular bone defects in three zones (A, B and C). The performance to predict treatment and inter- and intra-rater agreement were evaluated.

RESULTS

The ability of the newly proposed classification to predict treatment was 87.3% (k weighted: 0.65). The inter-rater reliability was 90.1% (k: 0.81), and the intra-rater reliability between the two sets of evaluations performed by the observer at 1-month distance was 97.5% (k: 0.94).

CONCLUSIONS

The newly proposed classification was able to characterize the extent of acetabular bone defects and predict pre-operatively the appropriate surgical treatment strategy in 87.3% of cases. It showed a strong agreement among raters and an almost perfect agreement among different measurements at 1 month distance. This new tool could be used in the preoperative assessment to drive the use of secondary level image examinations and the type of surgical management.

Dual-mobility implants in primary and revision total hip arthroplasty: A systematic review and meta-analysis

Purpose

Total hip arthroplasty (THA) is a common and successful operation. However, dislocation remains a significant cause of implant failure in fixed-bearing designs. This study investigated the effect of dual-mobility implants (DM) compared to fixed-bearing (FB) implants on all-cause revisions, revisions due to dislocation, post-operative complications and functional scores in patients undergoing primary and revision THA.

Methods

A systematic review was performed including studies that compared DM with FB implants in primary or revision THA according to PRISMA guidelines, and was registered in PROSPERO (ID CRD42023403736). The Cochrane Library, Embase, MEDLINE, Web of Science, and Scopus were searched from the time of database inception to March 12, 2023. Eligible studies underwent meta-analysis and risk of bias assessment using the ROBINS-I tool. Treatment effects were assessed using odds ratios and data were pooled using a random-effects maximum-likelihood, where appropriate.

Results

Eight comparative, non-randomised studies involving 2810 DM implants and 3188 FB implants were included. In primary THA, there was an imprecise estimate of the difference in all-cause revision (OR 0.82, 95 % CI 0.25-2.72) and a significant benefit for the DM cohort in revision due to dislocation (OR 0.08, 95 % CI 0.02-0.28). In revision THA, the DM cohort showed benefit in all-cause revision (OR 0.57, 95 % CI 0.31-1.05) and revision due to dislocation (OR 0.14, 95 % CI 0.04-0.53). DM implants were associated with a lower incidence of implant dislocation and infection. The analysis of functional outcomes was limited due to reporting limitations. No intraprosthetic dislocations were observed.

Conclusion

The results suggest that contemporary DM designs may be advantageous in reducing the risk of all-cause revision, revision due to dislocation, and post-operative complication incidence at mid-term follow-up. Further high-quality prospective studies are needed to evaluate the long-term risk profile of this design, especially in the revision context.

Analysis of Postoperative Complication and Revision Rates and Mid- to Long-Term Implant Survival in Primary Short-Stem Total Hip Arthroplasty

Background/Objectives: Short-stem prostheses were introduced as an alternative to conventional straight-stem prostheses. Despite their benefits, including minimally invasive approaches, soft-tissue- and bone-sparing implantation, and physiological load transfer to the metaphysis, data on postoperative complication and revision rates as well as on implant survival are scarce. Methods: A retrospective analysis of 1327 patients who underwent primary total hip arthroplasty (THA) using the Metha® short stem between 2006 and 2023 was conducted. Complication and revision rates were analysed for the intraoperative, direct postoperative, and follow-up episodes. Implant survival was analysed with the endpoint of all-cause stem revision. Results: Intraoperative complications were observed in 3.77% of the cases and included 44 hairline cracks and 6 fractures. In 15 cases (30.0%), conversion to a straight-stem or revision implant was necessary. The direct postoperative complication rate was 2.44%, and 11 revision procedures were performed during inpatient stay (0.84%). Mean follow-up was 7 years (range 1-17). During follow-up, femoral component revision was performed in 60 cases. Aseptic loosening and stem subsidence accounted for a combined percentage of 80% of all indications. Implant survival rate was 95.66% after 5 years, 95.58% after 10 years, and 95.50% after 15 years. Conclusions: Our study provides a comprehensive analysis of postoperative complication and revision rates in a large sample undergoing primary short-stem THA. Postoperative complication rates were favourable, and the long-term implant survival rates were comparable to conventional straight-stem prostheses. Therefore, short-stem THA may be considered an alternative for younger patients.

MRI of total hip arthroplasty: technical aspects and imaging findings

Total hip arthroplasty (THA) is the best surgical approach for treating advanced hip degeneration, providing pain relief, and improved function in most cases. In the past, MR imaging quality has been highly compromised by in-plane distortions, inadequate fat saturation, and other artifacts due to metal components of THA. Technological advancements have made pathologic conditions, which were previously hidden by periprosthetic artifacts, outstanding features due to the optimization of several sequences. To date, several short and long-term complications involving bony and soft-tissue structures may be detected through magnetic resonance imaging (MRI). The use of MRI with adapted sequences and protocols may drastically reduce artifacts thereby providing essential pre-operative elements for planning revision surgery of failed THA. This review has the purpose of conveying new insights to musculoskeletal radiologists about the techniques to suppress metal-related artifacts and the hallmark MRI findings of painful THA. CRITICAL RELEVANCE STATEMENT: Advancements in metal-suppression have given radiologists the opportunity to play an emerging role in THA management. This article provides technical and imaging insights into challenges that can be encountered in cases of THA, which may present complications and characteristic imaging findings. KEY POINTS: Imaging total hip arthroplasty requires adapted MRI protocol and awareness of the common complications. We have reported the available metal-suppression sequences for evaluating total hip arthroplasty. Many structures and conditions should be considered when dealing with painful aseptic or septic arthroplasty.

Dislocation of primary total hip arthroplasty: Analysis of risk factors and preventive options

Total hip arthroplasty (THA) is one of the most successful elective operations in orthopedic surgery for improving pain and functional disability in patients with end-stage joint disease. However, dislocation continues to be a troublesome complication after THA, as it is a leading cause of revision and is associated with substantial social, health, and economic costs. It is a relatively rare, usually early occurrence that depends on both the patients' characteristics and the surgical aspects. The most recent and important finding is the special attention to be given preoperatively to spinopelvic mobility, which is closely related to the incidence of dislocation. Consequently, clinical and radiographic assessment of the lumbar spine is mandatory to identify an altered pelvic tilt that could suggest a different positioning of the cup. Lumbar spinal fusion is currently considered a risk factor for dislocation and revision regardless of whether it is performed prior to or after THA. Surgical options for its treatment and prevention include the use of prostheses with large diameter of femoral head size, dual mobility constructs, constrained liners, and modular neck stems.

SrTiO3 Nanotube-Based "Pneumatic Nanocannon" for On-Demand Delivery of Antibacterial and Sustained Osseointegration Enhancement

Infection and aseptic loosening caused by bacteria and poor osseointegration remain serious challenges for orthopedic implants. The advanced surface modification of implants is an effective strategy for addressing these challenges. This study presents a "pneumatic nanocannon" coating for titanium orthopedic implants to achieve on-demand release of antibacterial and sustained release of osteogenic agents. SrTiO3 nanotubes (SrNT) were constructed on the surface of Ti implants as "cannon barrel," the "cannonball" (antibiotic) and "propellant" (NH4HCO3) were codeposited into SrNT with assistance of mussel-inspired copolymerization of dopamine and subsequently sealed by a layer of polydopamine. The encapsulated NH4HCO3 within the nanotubes could be thermally decomposed into gases under near-infrared irradiation, propelling the on-demand delivery of antibiotics. This coating demonstrated significant efficacy in eliminating typical pathogenic bacteria both in planktonic and biofilm forms. Additionally, this coating exhibited a continuous release of strontium ions, which significantly enhanced the osteogenic differentiation of preosteoblasts. In an implant-associated infection rat model, this coating demonstrated substantial antibacterial efficiency (>99%) and significant promotion of osseointegration, along with alleviated postoperative inflammation. This pneumatic nanocannon coating presents a promising approach to achieving on-demand infection inhibition and sustained osseointegration enhancement for titanium orthopedic implants.

Multivariate Analysis of Risk Factors for In-Hospital Dislocation Following Primary Total Hip Arthroplasty

Background: Early dislocation following primary total hip arthroplasty (THA) is a rare but devastating complication and represents a source of patient morbidity and financial burden to the healthcare system. The objective of this study was to identify patient characteristics and comorbidities that are associated with increased early in-hospital dislocation rates following primary THA. Methods: A retrospective cohort study was conducted using patient data from the Nationwide Inpatient Sample (NIS) database; we identified patients who had undergone THA from 2016 to 2019 and compared those with an early periprosthetic dislocation prior to discharge to those without. The patient characteristics and comorbidities were compared using univariate analysis with a subsequent investigation of statistically significant variables using multivariate analysis. The variables were compared using chi square, Fisher's exact test, and independent sample t-tests with data assessed using odds ratio with 95% confidence intervals. Results: A total of 5151 patients sustained an early dislocation compared to 362,743 who did not. Those who sustained an in-hospital dislocation were more likely to share the following characteristics: female sex (OR 1.21, p < 0.01), age > 70 (OR 1.45, p < 0.01), Caucasian ethnicity (OR 1.22, p < 0.01), SLE (OR 1.87, p < 0.01), and Parkinson's disease (OR 1.93, p < 0.01). Certain characteristics were also associated with decreased odds of having an in-hospital dislocation including elective surgery (OR 0.14, p < 0.01), tobacco use (OR 0.8, p < 0.01), diabetes without complications (OR 0.87, p < 0.01), and a history of heart valve replacement (OR 0.81, p < 0.01). The length of stay was significantly longer (4.7 days vs. 2.3 days) as was the total hospital charges (USD $101,517 vs. USD $66,388) for the early in-hospital dislocation group. Conclusions: Several patient characteristics and comorbidities are associated with early in-hospital dislocation episodes following total hip arthroplasty including female sex, age > 70, non-elective surgery, SLE, and Parkinson's. This information may be useful to help guide intraoperative implant selection and/or postoperative protocol in select patient populations to limit early instability as well as decrease the financial burden associated with this postoperative complication.

A Comparison of Wound Complications Following Total Hip Arthroplasty Performed Through the Direct Anterior Versus Direct Lateral Approach

Background

Some studies have suggested the risk of wound complications may be higher using the direct anterior (DA) approach to total hip arthroplasty (THA). This study aimed to compare the risk of early postoperative wound complications between the DA and direct lateral (DL) approaches to THA and to determine patient risk factors that may contribute to this problem.

Methods

All patients who underwent primary THA with a single surgeon over a 5-year period were retrospectively reviewed. All patients were treated with either the DA or DL approach. Data collected included patient demographics, surgical approach, and wound status. There was a minimum follow-up of 6 weeks to allow for an adequate assessment of surgical wound healing. Univariate and multivariate analyses were used to compare the 2 approaches.

Results

Five hundred seventy-nine patients (77.6%) who underwent DA approach and 167 patients (22.4%) who underwent DL approach were included. Patients who underwent DL approach had a higher body mass index and a higher rate of diabetes than those treated with the DA approach. Forty patients (6.9%) in the DA cohort and 14 (8.4%) in the DL cohort experienced early wound complications, P = .523. After controlling for potential confounding variables, the surgical approach was not an independent risk factor for early postoperative wound complications.

Conclusions

While there have been concerns regarding use of the DA approach in patients with higher body mass index and certain medical comorbidities, the results of this study suggest the choice of surgical approach may have minimal effect on the rate of early postoperative wound complications.

How Many Patients Qualify for Extended Oral Antibiotic Prophylaxis Infection Following Primary and Revision Hip and Knee Arthroplasties?

Extended oral antibiotic prophylaxis (EOAP) has been suggested to reduce rates of periprosthetic joint infection (PJI) postoperatively after total joint arthroplasty (TJA). The purpose of this multicenter study is to define how many TJA patients are considered high risk for developing PJI based on published EOAP criteria and determine whether this status is associated with socioeconomic or demographic factors. All primary and aseptic revision TJAs performed in 2019 at three academic medical centers were reviewed. High-risk status was defined based on prior published EOAP criteria. Area deprivation index (ADI) was calculated as a measure of socioeconomic status. Data were reported as means with standard deviation. Both overall and institutional differences were compared. Of the 2,511 patients (2,042 primary and 469 revision) in this cohort, 73.3% met criteria for high risk (primary: 72.9% [1,490] and revision: 74.6% [350]). Patient's race or age did not have a significant impact on risk designation; however, a larger proportion of high-risk patients were women (p = 0.002) and had higher Elixhauser scores (p < 0.001). The mean ADI for high-risk patients was higher (more disadvantaged) than for standard-risk patients (64.0 [20.8] vs. 59.4 [59.4]) (p < 0.001). Over 72% of primary and revision TJA patients at three medical centers met published criteria for EOAP. These patients were more often women, had more comorbidities, and lived in more disadvantaged areas. Our findings suggest that most patients qualify for EOAP, which may call for more stringent criteria on who would benefit extended antibiotic prophylaxis.

Re-revision and mortality rate following revision total hip arthroplasty for infection

Aims

This study compares the re-revision rate and mortality following septic and aseptic revision hip arthroplasty (rTHA) in registry data, and compares the outcomes to previously reported data.

Methods

This is an observational cohort study using data from the German Arthroplasty Registry (EPRD). A total of 17,842 rTHAs were included, and the rates and cumulative incidence of hip re-revision and mortality following septic and aseptic rTHA were analyzed with seven-year follow-up. The Kaplan-Meier estimates were used to determine the re-revision rate and cumulative probability of mortality following rTHA.

Results

The re-revision rate within one year after septic rTHA was 30%, and after seven years was 34%. The cumulative mortality within the first year after septic rTHA was 14%, and within seven years was 40%. After multiple previous hip revisions, the re-revision rate rose to over 40% in septic rTHA. The first six months were identified as the most critical period for the re-revision for septic rTHA.

Conclusion

The risk re-revision and reinfection after septic rTHA was almost four times higher, as recorded in the ERPD, when compared to previous meta-analysis. We conclude that it is currently not possible to assume the data from single studies and meta-analysis reflects the outcomes in the 'real world'. Data presented in meta-analyses and from specialist single-centre studies do not reflect the generality of outcomes as recorded in the ERPD. The highest re-revision rates and mortality are seen in the first six months postoperatively. The optimization of perioperative care through the development of a network of high-volume specialist hospitals is likely to lead to improved outcomes for patients undergoing rTHA, especially if associated with infection.

Comparison of Outcomes in Dual-Mobility Versus Fixed-Bearing Implants in Primary Total Hip Arthroplasty: A Systematic Review and Meta-Analysis

Total hip arthroplasty (THA) is often regarded as one of the most successful surgical techniques developed in the twenty-first century. However, it is associated with complications such as prosthetic instability, dislocations, or infections. Dual-mobility (DM) implants have been developed with the goal of reducing the incidence of dislocations by increasing the femoral head-neck ratio, maximising hip stability, and improving the range of motion (ROM) before impingement and dislocation. This systematic review aims to comprehensively compare the safety and efficacy of DM versus fixed-bearing (FB) implants in primary THA patients. A comprehensive search strategy of PubMed, Embase, Scopus, and Web of Science Core Collection databases was executed to identify pertinent literature comparing DM and FB implants in THAs. Eligible studies underwent independent screening, and data were systematically extracted. The analysis employed pooled risk ratios (RR) for dichotomous outcomes and mean differences (MD) for continuous variables, each accompanied by their respective 95% confidence intervals (CI). Our systematic review and meta-analysis included nine studies encompassing 22,277 patients. The DM group had a significantly reduced incidence of dislocations compared to the FB group (RR 0.25, 95%CI [0.13, 0.47]; p-value <0.0001) and a significantly shorter length of stay (MD -9.92, 95%CI [-15.53, -4.32]; p-value = 0.0005). The FB group, however, had a significantly shorter operative time compared to the DM group (MD 10.41, 95%CI [7.64, 13.17]; p-value < 0.00001). We did not identify any significant statistical differences between the DM and FB groups regarding patient-reported outcome measures, the incidence of all-cause readmissions, the incidence of peri-prosthetic fractures, the incidence of infections, or the incidence of groyne pain.

Clinical effects of combined anteversion and offset on postoperative dislocation in total hip arthroplasty

BACKGROUND

Implant impingement and soft tissue tension are factors involved in dislocation after total hip arthroplasty (THA). Combined anteversion (CA) has been used as an indicator for implant placement. However, optimal implant placement remains a challenge. Moreover, the effect of changes in offset on dislocation is still unclear. In this study, we aimed to clarify the effects of postoperative CA and pre- and postoperative changes in offset on dislocation.

METHODS

Included were patients who underwent primary cementless THA between 2013 and 2020. The mean values of CA and offset in the dislocation and non-dislocation groups were compared. The CA values within ± 10% of the recommended values were defined as good CA, and those outside the range were rated as poor CA. The dislocation rates were compared between the good and poor CA groups and between the groups with and without increased offset.

RESULTS

A total of 283 hips were included. The mean values of CA in the dislocation and non-dislocation groups were significantly different (P < 0.05). The dislocation rate was significantly lower in the good CA group (P < 0.05). The dislocation rates in the groups with and without increased total offset were 0.5% and 4.3%, respectively (P = 0.004). There were no dislocations in patients with good CA and increased offset.

CONCLUSIONS

The dislocation rate was significantly lower when implants were placed within ± 10% of the recommended CA value. Our results suggest that dislocation can be avoided by placing the implant in the good CA range and considering the increase in total offset on the operative side.

Artemisinic acid attenuates osteoclast formation and titanium particle-induced osteolysis via inhibition of RANKL-induced ROS accumulation and MAPK and NF-κB signaling pathways

Periprosthetic osteolysis (PPO) is the most common cause of joint arthroplasty failure. Its progression involves both biological and mechanical factors. Osteoclastogenesis induced by wear from debris-cell interactions, ultimately leading to excessive bone erosion, is considered the primary cause of PPO; therefore, targeting osteoclasts is a promising treatment approach. Currently available drugs have various side effects and limitations. Artemisinic acid (ArA) is a sesquiterpene isolated from the traditional herb Artemisia annua L. that has various pharmacological effects, such as antimalarial, anti-inflammatory, and antioxidant activities. Therefore, this study was aimed at investigating the effect of ArA on osteoclast formation and bone resorption function in vitro, as well as wear particle-induced osteolysis in vivo, and to explore its molecular mechanism of action. Here, we report that ArA inhibits RANKL-stimulated osteoclast formation and function. Mechanistically, ArA suppresses intracellular reactive oxygen species levels by activating the antioxidant response via nuclear factor erythroid-2-related factor 2 (Nrf2) pathway upregulation. It also inhibits the mitogen-activated kinases (MAPK) and nuclear factor-κB (NF-κB) pathways, as well as the transcription and expression of NFATc1 and c-Fos. In vivo experiments demonstrated that ArA reduces osteoclast formation and alleviates titanium particle-induced calvarial osteolysis. Collectively, our study highlights that ArA, with its osteoprotective and antioxidant effects, is a promising therapeutic agent for preventing and treating PPO and other osteoclast-mediated osteolytic diseases.

Dual-mobility bearings reduce instability but may not be the only answer in revision total hip arthroplasty for recurrent dislocation

Aims

There is little information in the literature about the use of dual-mobility (DM) bearings in preventing re-dislocation in revision total hip arthroplasty (THA). The aim of this study was to compare the use of DM bearings, standard bearings, and constrained liners in revision THA for recurrent dislocation, and to identify risk factors for re-dislocation.

Methods

We reviewed 86 consecutive revision THAs performed for dislocation between August 2012 and July 2019. A total of 38 revisions (44.2%) involved a DM bearing, while 39 (45.3%) and nine (10.5%) involved a standard bearing and a constrained liner, respectively. Rates of re-dislocation, re-revision for dislocation, and overall re-revision were compared. Radiographs were assessed for the positioning of the acetabular component, the restoration of the centre of rotation, leg length, and offset. Risk factors for re-dislocation were determined by Cox regression analysis. The modified Harris Hip Scores (mHHSs) were recorded. The mean age of the patients at the time of revision was 70 years (43 to 88); 54 were female (62.8%). The mean follow-up was 5.0 years (2.0 to 8.75).

Results

DM bearings were used significantly more frequently in elderly patients (p = 0.003) and in hips with abductor deficiency (p < 0.001). The re-dislocation rate was 13.2% for DM bearings compared with 17.9% for standard bearings, and 22.2% for constrained liners (p = 0.432). Re-revision-free survival for DM bearings was 84% (95% confidence interval (CI) 0.77 to 0.91) compared with 74% (95% CI 0.67 to 0.81) for standard articulations, and 67% (95% CI 0.51 to 0.82) for constrained liners (p = 0.361). Younger age (hazard ratio (HR) 0.92 (95% CI 0.85 to 0.99); p = 0.031), lower comorbidity (HR 0.44 (95% CI 0.20 to 0.95); p = 0.037), smaller heads (HR 0.80 (95% CI 0.64 to 0.99); p = 0.046), and retention of the acetabular component (HR 8.26 (95% CI 1.37 to 49.96); p = 0.022) were significantly associated with re-dislocation. All DM bearings which re-dislocated were in patients with abductor muscle deficiency (HR 48.34 (95% CI 0.03 to 7,737.98); p = 0.303). The radiological analysis did not reveal a significant relationship between restoration of the geometry of the hip and re-dislocation. The mean mHHSs significantly improved from 43 points (0 to 88) to 67 points (20 to 91; p < 0.001) at the final follow-up, with no differences between the types of bearing.

Conclusion

We found that the use of DM bearings reduced the rates of re-dislocation and re-revision in revision THA for recurrent dislocation, but did not guarantee stability. Abductor deficiency is an important predictor of persistent instability.

Can Dual Mobility Cups Reduce Revision and Dislocation Risks? An Analysis of 107,528 Primary Total Hip Arthroplasties in the United States

BACKGROUND

Dual mobility acetabular cups (DMC) were designed to increase the effective femoral head size and improve stability with the goal of reducing revision risk at the potential cost of polyethylene thickness. We sought to evaluate revision risk following primary elective total hip arthroplasty with DMC compared to highly cross-linked polyethylene (XLPE).

METHODS

A cohort study was conducted using data from a Kaiser Permanente's total joint arthroplasty registry. Patients ≥18 years who underwent primary elective total hip arthroplasty using DMC, unipolar Metal-on-XLPE (MoXLPE), or unipolar Ceramic-on-XLPE (CoXLPE) were identified (2010 to 2021). The final sample comprised 2,219 DMC, 48,251 MoXLPE, and 57,058 CoXLPE. Multiple Cox proportional hazard regressions were used to evaluate aseptic revision and any dislocation regardless of revision within 6 years follow-up.

RESULTS

In adjusted analyses, no differences in aseptic revision risk were observed for MoXLPE (hazard ratio [HR] = 1.04, 95% confidence interval [CI] = 0.72 to 1.51) or CoXLPE (HR = 0.98, 95% CI = 0.69 to 1.40) compared to DMC. No differences in dislocation risk were observed for MoXLPE (HR = 1.42, 95% CI = 0.93 to 2.15) or CoXLPE (HR = 1.25, 95% CI = 0.84 to 1.87) compared to DMC.

CONCLUSIONS

In a US-based cohort, 6-year aseptic revision risk of DMC was similar to metal or ceramic femoral head unipolar constructs. Furthermore, no difference in dislocation risk was observed. Continued longer-term follow-up may reveal if there is a reduced risk of dislocation that comes at the cost of increased late revision.

LEVEL OF EVIDENCE

Level III.

Modular fluted tapered stems in two-stage reimplantation of previously infected total hip arthroplasties

Aims

Uncemented implants are now commonly used at reimplantation of a two-stage revision total hip arthoplasty (THA) following periprosthetic joint infection (PJI). However, there is a paucity of data on the performance of the most commonly used uncemented femoral implants - modular fluted tapered (MFT) femoral components - in this setting. This study evaluated implant survival, radiological results, and clinical outcomes in a large cohort of reimplantation THAs using MFT components.

Methods

We identified 236 reimplantation THAs from a single tertiary care academic institution from September 2000 to September 2020. Two designs of MFT femoral components were used as part of an established two-stage exchange protocol for the treatment of PJI. Mean age at reimplantation was 65 years (SD 11), mean BMI was 32 kg/m2 (SD 7), and 46% (n = 109) were female. Mean follow-up was seven years (SD 4). A competing risk model accounting for death was used.

Results

The 15-year cumulative incidence of any revision was 24%. There were 48 revisions, with the most common reasons being dislocation (n = 25) and infection (n = 16). The 15-year cumulative incidence of any reoperation was 28%. Only 13 revisions involved the fluted tapered component (FTC), for a 15-year cumulative incidence of any FTC revision of 8%. Only two FTCs were revised for aseptic loosening, resulting in a 15-year cumulative incidence of FTC revision for aseptic loosening of 1%. Stem subsidence ≥ 5 mm occurred in 2% of unrevised cases. All stems were radiologically stable at most recent follow-up. Mean Harris Hip Score was 69 (SD 20) at most recent follow-up.

Conclusion

This series demonstrated that MFT components were durable and reliable in the setting of two-stage reimplantation THA for infection. While the incidence of aseptic loosening was very low, the incidence of any revision was 24% at 15 years, primarily due to dislocation and recurrent PJI.

Dual-mobility tripod cup for revision hip arthroplasty: long-term (five to fourteen years) evaluation of a new generation cementless implant

PURPOSE

The aims of this study were to evaluate the survivorships of a new generation cementless DMC with tripod additional fixation in revision total hip arthroplasty and complications at a minimum five year follow-up.

METHODS

One hundred and fifteen revisions (THA) treated with tripod DMC performed between 2009 and 2015 were included in this retrospective study. Acetabular defects were classified as Paprosky 1 (n = 38, 33%), 2 (n = 75, 65%) or 3 (n = 2, 2%). Unipolar or bipolar revision was performed for the following indications: aseptic acetabular loosening (63%), infection (14%), aseptic bipolar loosening (11%), instability (4%), aseptic femoral loosening (3%), ALVAL (3%) and iliopsoas impingement (2%). Mean follow-up was 9.4 years ± two (range, 5 to 14).

RESULTS

At the final follow-up, a single episode of dislocation occurred within three months after the procedure (0.8%) with no revision. Three cases of aseptic loosening were diagnosed (2.6%). Four infections (3.5%) required reoperation: three required a two stage bipolar revision; one was treated by DAIR procedure. At the latest follow-up, the survivorship of the acetabular cup for aseptic loosening was 98% [95% CI (91.2-99.4)] and for any reasons was 94.4% [95% CI (90.1%-98.9%)]; the mean HHS improved from 60 points (range, 18-94 points) to 83 points (range, 37-100 points) (p < .001).

CONCLUSION

This study reports a low complication rate in favour of the use of a tripod DMC in revision THA with a satisfactory survivorship at a ten year follow-up.

Increasing temperature accelerates Ti-6Al-4V oxide degradation and selective dissolution: An Arrhenius-based analysis

Ti-6Al-4V selective dissolution occurs in vivo on orthopedic implants as the leading edge of a pitting corrosion attack. A gap persists in our fundamental understanding of selective dissolution and pre-clinical tests fail to reproduce this damage. While CoCrMo clinical use decreases, Ti-6Al-4V and the crevice geometries where corrosion can occur remain ubiquitous in implant design. Additionally, most additively manufactured devices cleared by the FDA use Ti-6Al-4V. Accelerated preclinical testing, therefore, would aid in the evaluation of new titanium devices and biomaterials. In this study, using temperature, we (1) developed an accelerated pre-clinical methodology to rapidly induce dissolution and (2) investigated the structure-property relationship between the dissolving surface and the oxide layer. We hypothesized that solution temperature and H2O2 concentration would accelerate oxide degradation, increase corrosion kinetics and decrease experimental times. To assess this effect, we selected temperatures above (45 °C), below (24 °C), and at (37 °C) physiological levels. Then, we acquired electrochemical impedance spectra during active β dissolution, showing significant decreases in oxide polarization resistance (Rp) both over time (p = 0.000) and as temperature increased (p = 0.000). Next, using the impedance response as a guide, we quantified the extent of selective dissolution in scanning electron micrographs. As the temperature increased, the corrosion rate increased in an Arrhenius-dependent manner. Last, we identified three surface classes as the oxide properties changed: undissolved, transition and dissolved. These results indicate a concentration and temperature dependent structure-property relationship between the solution, the protective oxide film, and the substrate alloy. Additionally, we show how supraphysiological temperatures induce structurally similar dissolution to tests run at 37 °C in less experimental time. STATEMENT OF SIGNIFICANCE: Within modular taper junctions of total hip replacement systems, retrieval studies document severe corrosion including Ti-6AL-4V selective dissolution. Current pre-clinical tests and ASTM standards fail to reproduce this damage, preventing accurate screening of titanium-based biomaterials and implant designs. In this study, we induce selective dissolution using accelerated temperatures. Building off previous work, we use electrochemical impedance spectroscopy to rapidly monitor the oxide film during dissolution. We elucidate components of the dissolution mechanism, where oxide degradation precedes pit nucleation within the β phase. Using an Arrhenius approach, we relate these accelerated testing conditions to more physiologically relevant solution concentrations. In total, this study shows the importance of including adverse electrochemical events like cathodic activation and inflammatory species in pre-clinical testing.

Comparing outcomes in revision total hip arthroplasty in inpatient versus outpatient setting: a matched cohort analysis

BACKGROUND

As the population ages, revision total hip arthroplasty (rTHA) is becoming more common. However, there is a paucity of literature regarding perioperative outcomes following inpatient versus outpatient rTHA. Our study aims to compare perioperative complications and readmission rates associated with rTHA in a large national cohort.

METHODS

A retrospective, propensity-matched cohort study was conducted using the National Surgical Quality Improvement Program database from 2006 to 2020. Patients undergoing rTHA in the inpatient setting were propensity matched to patients receiving rTHA in the outpatient setting. Following 1:1 matching, multivariate analyses were performed to compare perioperative complications and readmission.

RESULTS

A total of 207,102 patients were identified, including 181,164 outpatient primary THA, 25,466 inpatient rTHA, and 492 outpatient rTHA patients. Following propensity matching, outpatient primary THA versus outpatient rTHA had 210 patients and inpatient rTHA versus outpatient rTHA had 214 patients. Patients in the outpatient rTHA had a significantly higher operative time (132.4 ± 73.2 versus 90.9 ± 32.7, p < 0.001) and length of stay (1.6 ± 1.6 vs. 0.9 ± 1.0, p < 0.001) compared to outpatient primary THA. When comparing inpatient versus outpatient rTHA, the outpatient cohort had lower operative time (131.1 ± 70.9 vs. 145.4 ± 71.5, p = 0.038), total length of stay (1.7 ± 1.8 vs. 3.6 ± 4.1, p < 0.001), and bleeding complications (6% vs. 18%, p < 0.001).

CONCLUSION

There were no difference in the odds of complications between outpatient primary and revision THA. Additionally, rTHA performed in an outpatient setting did not show any increase in immediate compared to inpatient settings. These findings suggest that rTHA can be safely performed on certain patients.

Revision Dual Mobility Constructs With Unmatched Acetabular and Femoral Components Do Not Increase Failure Rate

BACKGROUND

Dual mobility (DM) constructs for revision total hip arthroplasty (THA) have continued to grow in popularity to mitigate instability. This benefit comes at the cost of potential unique modes of failure, and there are theoretical concerns that combining femoral and acetabular components from different manufacturers could lead to increased failure rates. We aimed to investigate rates of reoperation between matched and unmatched DM implants used in revision THA.

METHODS

We retrospectively reviewed 217 revision THAs performed with DM constructs between July 2012 and September 2021 at a single institution. Dual mobility (DM) constructs were classified as "matched" if the acetabular and femoral components were manufactured by the same company. They were classified as "unmatched" if the acetabular and femoral components were manufactured by different companies. The primary outcome was reoperation for any reason.

RESULTS

There were 136 matched DM constructs and 81 unmatched constructs. Average follow-up was 4.6 years (range, 2.0 to 9.6 years). There was no difference in reoperation rate between matched and unmatched groups (11.0 versus 13.6%, P = .576). The most common reasons for reoperation in both groups were instability and periprosthetic joint infection. There was 1 revision for intraprosthetic dislocation in the matched group.

CONCLUSIONS

The use of unmatched DM components in revision THA was common and did not increase the risk of reoperation at an average of 4.6-year follow-up. This information can be helpful in operative planning, but further research on long-term survival will be necessary.

Cemented dual-mobility constructs in uncemented revision acetabular components

Aims

Dislocation remains a leading cause of failure following revision total hip arthroplasty (THA). While dual-mobility (DM) bearings have been shown to mitigate this risk, options are limited when retaining or implanting an uncemented shell without modular DM options. In these circumstances, a monoblock DM cup, designed for cementing, can be cemented into an uncemented acetabular shell. The goal of this study was to describe the implant survival, complications, and radiological outcomes of this construct.

Methods

We identified 64 patients (65 hips) who had a single-design cemented DM cup cemented into an uncemented acetabular shell during revision THA between 2018 and 2020 at our institution. Cups were cemented into either uncemented cups designed for liner cementing (n = 48; 74%) or retained (n = 17; 26%) acetabular components. Median outer head diameter was 42 mm. Mean age was 69 years (SD 11), mean BMI was 32 kg/m2 (SD 8), and 52% (n = 34) were female. Survival was assessed using Kaplan-Meier methods. Mean follow-up was two years (SD 0.97).

Results

There were nine cemented DM cup revisions: three for periprosthetic joint infection, three for acetabular aseptic loosening from bone, two for dislocation, and one for a broken cup-cage construct. The two-year survivals free of aseptic DM revision and dislocation were both 92%. There were five postoperative dislocations, all in patients with prior dislocation or abductor deficiency. On radiological review, the DM cup remained well-fixed at the cemented interface in all but one case.

Conclusion

While dislocation was not eliminated in this series of complex revision THAs, this technique allowed for maximization of femoral head diameter and optimization of effective acetabular component position during cementing. Of note, there was only one failure at the cemented interface.

What to Know about Antimicrobial Coatings in Arthroplasty: A Narrative Review

Periprosthetic joint infections (PJIs) are one of the most worrying complications orthopedic surgeons could face; thus, methods to prevent them are evolving. Apart from systemic antibiotics, targeted strategies such as local antimicrobial coatings applied to prosthetics have been introduced. This narrative review aims to provide an overview of the main antimicrobial coatings available in arthroplasty orthopedic surgery practice. The search was performed on the PubMed, Web of Science, SCOPUS, and EMBASE databases, focusing on antimicrobial-coated devices used in clinical practice in the arthroplasty world. While silver technology has been widely adopted in the prosthetic oncological field with favorable outcomes, recently, silver associated with hydroxyapatite for cementless fixation, antibiotic-loaded hydrogel coatings, and iodine coatings have all been employed with promising protective results against PJIs. However, challenges persist, with each material having strengths and weaknesses under investigation. Therefore, this narrative review emphasizes that further clinical studies are needed to understand whether antimicrobial coatings can truly revolutionize the field of PJIs.