Green biosynthesis of superparamagnetic magnetite Fe3O4 nanoparticles and biomedical applications in targeted anticancer drug delivery system: A review

Protective effect of vasostatin-1 plasmid-like nanoparticles on aortic aneurysm and its mechanism

Vasostatin 1 (VS-1) plays an important role in the regulation of various tissue injury and repair processes, but its role in aortic aneurysm remains unclear. The plasmid-like nanoparticles containing the vasostatin-1 gene Pul-PGEA-pCas-sgVs-1 were constructed, and their guarantee, safety, hemolysis, and particle size were analyzed. Eighty-four eight-week-old male ApoE-mice were randomly divided into blank group (without any treatment), model group (Ang II aortic aneurysm model + tail injection of PBS), control group (modeling + tail injection of Pul-PGEA-pCas9), and experimental group (modeling + tail injection of Pul-PGEA-pCas-sgVs-1), with 21 rats in each group. The incidence, mortality, and maximum diameter of abdominal aortic aneurysm (AAA) and the contents of high sensitivity C-reactive protein (HS-CRP), soluble intercellular adhesion molecule-1 (ICAM-1), soluble vascular cell adhesion molecule-1 (VCAM-1), and TNF-a in serum were compared in different groups of mice. The results showed that Pul-PGEA-pCas-sgVs-1 had good biosafety and transfection ability. The maximum diameter of abdominal aorta, incidence of abdominal aortic aneurysm, mortality, and the expression levels of HS-CRP, ICAM-1, VCAM-1, and TNF-a in the experimental group were lower than those in the model group (P< 0.05). These results indicated that the plasmid-like nanoparticles Pul-PGEA-pCas-sgVs-1 can inhibit the development of aorta by down-regulating the expression of inflammatory factors, which played a good protective role on the aorta.

Formation, antimicrobial activity, and biomedical performance of plant-based nanoparticles: a review

Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant extracts contain flavonoids, amino acids, proteins, polysaccharides, enzymes, polyphenols, steroids, and reducing sugars that facilitate the reduction, formation, and stabilization of nanoparticles. Moreover, synthesizing nanoparticles from plant extracts is fast, safe, and cost-effective because it does not consume much energy, and non-toxic derivatives are generated. These nanoparticles have diverse and unique properties of interest for applications in many fields. Here, we review the synthesis of metal/metal oxide nanoparticles with plant extracts. These nanoparticles display antibacterial, antifungal, anticancer, and antioxidant properties. Plant-based nanoparticles are also useful for medical diagnosis and drug delivery.

Fe3O4 Nanoparticles: Structures, Synthesis, Magnetic Properties, Surface Functionalization, and Emerging Applications

Magnetite (Fe3O4) nanoparticles (NPs) are attractive nanomaterials in the field of material science, chemistry, and physics because of their valuable properties, such as soft ferromagnetism, half-metallicity, and biocompatibility. Various structures of Fe3O4 NPs with different sizes, geometries, and nanoarchitectures have been synthesized, and the related properties have been studied with targets in multiple fields of applications, including biomedical devices, electronic devices, environmental solutions, and energy applications. Tailoring the sizes, geometries, magnetic properties, and functionalities is an important task that determines the performance of Fe3O4 NPs in many applications. Therefore, this review focuses on the crucial aspects of Fe3O4 NPs, including structures, synthesis, magnetic properties, and strategies for functionalization, which jointly determine the application performance of various Fe3O4 NP-based systems. We first summarize the recent advances in the synthesis of magnetite NPs with different sizes, morphologies, and magnetic properties. We also highlight the importance of synthetic factors in controlling the structures and properties of NPs, such as the uniformity of sizes, morphology, surfaces, and magnetic properties. Moreover, emerging applications using Fe3O4 NPs and their functionalized nanostructures are also highlighted with a focus on applications in biomedical technologies, biosensing, environmental remedies for water treatment, and energy storage and conversion devices.

Sustainable materials in the removal of pesticides from contaminated water: Perspective on macro to nanoscale cellulose

Recently, over utilization of pesticides in agrarian and non- agrarian sectors has resulted in a significant increment in the deposition of their remnants in different segments of the environmental media. The presence of pesticides and transportation of their different metabolites in rivers, ponds, lakes, soils, air, groundwater sources and drinkable water sources has demonstrated a high threat to human wellbeing and the climate. Thus, the removal of pesticides and their metabolites from contaminated water is imperative to lessen the ill effects of pesticides on human beings. In the present article, we have appraised recent advances in pesticides removal utilizing low cost pristine and functionalized cellulose biomass-based derivatives. One of the key focus has been on better understand the destiny of pesticides in the environment as well as their behaviour in the water. In addition, the impact of magnetite cellulose nanocomposites, cellulose derived photo nano-catalyst, cellulose/clay nano composites, CdS/cellulose nanocomposites and activated carbons/biochar on percent removal of pesticides have also been a part of the current review. The impact of different parameters such as adsorbent dosage, pH, time of contact and initials pesticide concentration on adsorption capacity and adsorption kinetics followed during absorption by different cellulosic bio-adsorbents has also been given. The cellulosic biomass is highly efficient in the removal of pesticides and their efficiency further increases upon functionalization or their conversion into activated carbons forms. Nano particles loaded cellulosic materials have in general found to be less efficient than raw, functionalized cellulosic materials and activated carbons. Further, among different nano particles loaded with cellulose-based materials, cellulose/MnO₂ photonanocatalyst were noticed to be more effective. So considerable efforts should be given to determine the finest practices that relate to the dissipation of different pesticides from the water.

Magnetite-Silica Core/Shell Nanostructures: From Surface Functionalization towards Biomedical Applications—A Review

The interconnection of nanotechnology and medicine could lead to improved materials, offering a better quality of life and new opportunities for biomedical applications, moving from research to clinical applications. Magnetite nanoparticles are interesting magnetic nanomaterials because of the property-depending methods chosen for their synthesis. Magnetite nanoparticles can be coated with various materials, resulting in “core/shell” magnetic structures with tunable properties. To synthesize promising materials with promising implications for biomedical applications, the researchers functionalized magnetite nanoparticles with silica and, thanks to the presence of silanol groups, the functionality, biocompatibility, and hydrophilicity were improved. This review highlights the most important synthesis methods for silica-coated with magnetite nanoparticles. From the presented methods, the most used was the Stöber method; there are also other syntheses presented in the review, such as co-precipitation, sol-gel, thermal decomposition, and the hydrothermal method. The second part of the review presents the main applications of magnetite-silica core/shell nanostructures. Magnetite-silica core/shell nanostructures have promising biomedical applications in magnetic resonance imaging (MRI) as a contrast agent, hyperthermia, drug delivery systems, and selective cancer therapy but also in developing magnetic micro devices.

Green Synthesis of Metal and Metal Oxide Nanoparticles: Principles of Green Chemistry and Raw Materials

Increased request for metal and metal oxide nanoparticles nanoparticles has led to their large-scale production using high-energy methods with various toxic solvents. This cause environmental contamination, thus eco-friendly “green” synthesis methods has become necessary. An alternative way to synthesize metal nanoparticles includes using bioresources, such as plants and plant products, bacteria, fungi, yeast, algae, etc. “Green” synthesis has low toxicity, is safe for human health and environment compared to other methods, meaning it is the best approach for obtaining metal and metal oxide nanoparticles. This review reveals 12 principles of “green” chemistry and examples of biological components suitable for “green” synthesis, as well as modern scientific research of eco-friendly synthesis methods of magnetic and metal nanoparticles. Particularly, using extracts of green tea, fruits, roots, leaves, etc., to obtain Fe3O4 NPs. The various precursors as egg white (albumen), leaf and fruit extracts, etc., can be used for the „green” synthesis of spinel magnetic NPs. “Green” nanoparticles are being widely used as antimicrobials, photocatalysts and adsorbents. “Green” magnetic nanoparticles demonstrate low toxicity and high biocompatibility, which allows for their biomedical application, especially for targeted drug delivery, contrast imaging and magnetic hyperthermia applications. The synthesis of silver, gold, platinum and palladium nanoparticles using extracts from fungi, red algae, fruits, etc., has been described.

Preparation of Multilayered Core-Shell Fe3O4-SnO2-C Nanoparticles via Polymeric/Silane-Amino Functionalization

Multilayered core–shell Fe₃O₄-SnO₂-C nanoparticles were prepared via surface treatment and carbonization at atmospheric pressure. Fe₃O₄-SnO₂ nanoparticles were prepared by the carboxylation of the pivotal particles (Fe₃O₄) with an anionic surfactant to immobilize SnO₂ nanoparticles. A method was proposed to externally surround hydrophilic carbon with amine-forming materials, polyethyleneimine (PEI), and (3-Aminopropyl) triethoxysilane (APTES). The synthesis strategy was based on the electrostatic bonding of the introduced amine group with the hydroxyl group on the carbon precursor and the carbonization of the coating layer by the catalytic reaction of sulfuric acid.

Hydroxyurea-loaded Fe3O4/SiO2/chitosan-g-mPEG2000 nanoparticles; pH-dependent drug release and evaluation of cell cycle arrest and altering p53 and lincRNA-p21 genes expression

Carbohydrate polymers were widely used in pharmaceuticals and drug delivery systems due to their biodegradability and biocompatibility. Among them, chitosan (Cs) has been considered in many new drug delivery systems. Poly(ethylene glycol) as a hydrophilic polymer can increase the solubility and stealth functions of nanocarriers. The Fe₃O₄ nanoparticles functionalized with polymers act as non-toxic drug vehicles for tumor targeting under external magnetic fields. In present study, the Fe₃O₄/SiO₂-NH₂ nanoparticles were prepared and then functionalized with methoxy-PEGylated chitosan (Cs-g-mPEG2000) and the hydroxyurea (HU) was loaded on this nanoparticles. The structure, crystallinity, and morphology of HU/Fe₃O₄/SiO₂/Cs-g-mPEG2000 were determined using spectroscopic and electron microscopy analysis. Encapsulation efficiency of HU and the percentage of loading and release rate at different pH values at 37 °C were examined. Maximum drug release was observed at pH = 7.4. According to TEM results, the nanoparticle sizes were between 18 and 157 nm. The cytotoxicity effect of HU-loaded nanoparticles against MCF-7 human breast cancer cell was evaluated using MTT assay and cell cycle arrest analysis. The inhibitory concentration (IC50) values were 249 and 85 μg/mL on the MCF-7 cell line compared to the control group in 24 h and 96 h, respectively. In addition, the expression of p53 and lincRNA-P21 genes in treated cells and control group was assessed using real-time PCR, and the results showed that the ratio of p53 expression to lincRNA-P21 in MCF-7 cells was significantly increased (P < 0.05). The cell cycle arrested in the S-phase and the population of cells increased 1.3-fold compared to the control group.

Comparison of the Surface Properties of Hydrothermally Synthesised Fe3O4@C Nanocomposites at Variable Reaction Times

The influence of variable reaction time (tr) on surface/textural properties (surface area, total pore volume, and pore diameter) of carbon-encapsulated magnetite (Fe3O4@C) nanocomposites fabricated by a hydrothermal process at 190 °C for 3, 4, and 5 h was studied. The properties were calculated using the Brunauer-Emmett-Teller (BET) isotherms data. The nanocomposites were characterised using Fourier transform infrared spectroscopy, X-ray diffraction analysis, thermogravimetry, and scanning and transmission electron microscopies. Analysis of variance shows tr has the largest effect on pore volume (F value = 1117.6, p value < 0.0001), followed by the surface area (F value = 54.8, p value < 0.0001) and pore diameter (F value = 10.4, p value < 0.001) with R2-adjusted values of 99.5%, 88.5% and 63.1%, respectively. Tukey and Fisher tests confirmed tr rise to have caused increased variations in mean particle sizes (11-91 nm), crystallite sizes (5-21 nm), pore diameters (9-16 nm), pore volume (0.017-0.089 cm3 g-1) and surface area (7.6-22.4 m2 g-1) of the nanocomposites with individual and simultaneous confidence limits of 97.9 and 84.4 (p-adj < 0.05). The nanocomposites' retained Fe-O vibrations at octahedral (436 cm-1) and tetrahedral (570 cm-1) cubic ferrite sites, modest thermal stability (37-60 % weight loss), and large volume-specific surface area with potential for catalytic application in advanced oxidation processes.

Synthesis of Magnetite Nanoparticles through a Lab-On-Chip Device

Magnetite nanoparticles (MNPs) represent one of the most intensively studied types of iron oxide nanoparticles in various fields, including biomedicine, pharmaceutics, bioengineering, and industry. Since their properties in terms of size, shape, and surface charge significantly affects their efficiency towards the envisaged application, it is fundamentally important to develop a new synthesis route that allows for the control and modulation of the nanoparticle features. In this context, the aim of the present study was to develop a new method for the synthesis of MNPs. Specifically, a microfluidic lab-on-chip (LoC) device was used to obtain MNPs with controlled properties. The study investigated the influence of iron precursor solution concentration and flowed onto the final properties of the nanomaterials. The synthesized MNPs were characterized in terms of size, morphology, structure, composition, and stability. Results proved the formation of magnetite as a single mineral phase. Moreover, the uniform spherical shape and narrow size distribution were demonstrated. Optimal characteristics regarding MNPs crystallinity, uniformity, and thermal stability were obtained at higher concentrations and lower flows. In this manner, the potential of the LoC device is a promising tool for the synthesis of nanomaterials by ensuring the necessary uniformity for all final applications.

Synthesis and efficacy of norfloxacin loaded onto magnetic hydrogel nanocomposites

A targeted drug delivery system based on biocompatible magnetic hydrogel nanocomposites consisting of poly[oligo(oxyethylene methacrylate)] anchored Fe3O4 nanoparticles was synthesized. The characteristics, thermal properties, morphology and magnetic properties were studied by XRD, FT-IR, TGA, SEM, TEM and VSM. A norfloxacin (NOR) anti-bacterial agent with a potential antitumor activity was immobilized into hydrogels, Fe3O4 nanoparticles and their magnetic hydrogel nanocomposites. The in vitro drug release manner of NOR was explored at different temperatures and pH values. The behavior of the drug release has been studied via different kinetic models. The antibacterial efficacy was tested against Streptococcus, Staphylococcus aureus, Kelebsella pneumonia and Escherichia coli via well diffusion method, and showed significant activity compared to the unloaded drug. Furthermore, an antitumor efficacy against HCT-116, HepG-2, PC3 and MCF-7 cancer cells revealed the highest cytotoxic efficacy with no influence on healthy cells. These nanodrugs, retaining both antibacterial and anticancer efficacy, have a talented therapeutic potential because of their selective cytotoxicity, connected with the ability to minimize the risk of bacterial infection in a cancer patient who is frequently immunocompromised.

Metal and Metal Oxide Nanoparticle as a Novel Antibiotic Carrier for the Direct Delivery of Antibiotics

In addition to the benefits, increasing the constant need for antibiotics has resulted in the development of antibiotic bacterial resistance over time. Antibiotic tolerance mainly evolves in these bacteria through efflux pumps and biofilms. Leading to its modern and profitable uses, emerging nanotechnology is a significant field of research that is considered as the most important scientific breakthrough in recent years. Metal nanoparticles as nanocarriers are currently attracting a lot of interest from scientists, because of their wide range of applications and higher compatibility with bioactive components. As a consequence of their ability to inhibit the growth of bacteria, nanoparticles have been shown to have significant antibacterial, antifungal, antiviral, and antiparasitic efficacy in the battle against antibiotic resistance in microorganisms. As a result, this study covers bacterial tolerance to antibiotics, the antibacterial properties of various metal nanoparticles, their mechanisms, and the use of various metal and metal oxide nanoparticles as novel antibiotic carriers for direct antibiotic delivery.

Conjugation strategies on functionalized iron oxide nanoparticles as a malaria vaccine delivery system

Vaccination has been used effectively to protect from infectious diseases and non-infectious diseases such as cancer and allergies. Different forms of particulate arrangements, including nanoparticles, virus-like particles (VLPs), and virosomes, have been built recently depending on the type of pathogen to be targeted. The ability to conjugate the recombinant Plasmodium yoelii, 19-kDa C-terminal fragment of merozoite surface protein 1 (PyMSP119) on the surface of superparamagnetic magnetite nanoparticles (SPIONs) was explored as a new technique of enhancing vaccination against malaria. Different conjugation strategies were performed to correlate the effects of nanoparticle chemistry surfaces to bind later with the malaria protein. (SPIONs) were prepared by chemical coprecipitation method and coated with 3-aminopropyltriethoxysilane (APTS) alone (as a surface coater), or with both APTS and polyethylene glycol (PEG) (as a shield to protect the malaria protein from proteolytic enzymes) by using a modified silanisation method. X-ray powder diffraction (XRD, Philips Model) patterns indicated that the SPIONs were of high purity with an inverse spinal structure. Fourier Transform Infrared Spectroscopy (FTIR) was collected using PerkinElmer Spectrum 100 Series; spectra of uncoated and coated magnetite nanoparticles confirmed that the silane layer had been coated on the surface Fe3O4. The SPIONs were superparamagnetic as investigated by Vibrating Sample Magnetometry (VSM, Princeton Applied Research, model ISS) and relatively stable in aqueous phase at room temperature and could also be quickly recovered from suspension using an external magnet. Introduce the carboxyl groups onto the SPIONs surfaces, resulting in a relatively high protein binding capacity onto the nanoparticle surfaces. The bare particles had a mean size of around 20 nm with a relatively narrow size distribution. 82% of African Green Monkey fibroblast (COS-7) were alive in nanoparticle suspension using the MTT assay method. The quantity of protein explicitly bound to particles was determined using Sodium Dodecyl Sulfate (SDS) - Polyacrylamide Gel Electrophoresis (PAGE). SDS–PAGE. When the conjugation blend was prepared in EDC, there was approximately 100% binding between PyMSP119 and the Fe3O4-COOH particles because no protein band was apparent at the expected molecular weight for PyMSP119 (45 kDa). The current study investigates the theory that the gradual, persistent release of the malaria antigen may stimulate and maintain an elevated level of immune response for an extended period in vivo, which will be the scope of future work.

Spinel ferrites (MFe2O4): Synthesis, improvement and catalytic application in environment and energy field

To develop efficient catalysts is one of the major ways to solve the energy and environmental problems. Spinel ferrites, with the general chemical formula of MFe₂O₄ (where M = Mg²⁺, Co²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Mn²⁺, etc.), have attracted considerable attention in catalytic research. The flexible position and valence variability of metal cations endow spinel ferrites with diverse physicochemical properties, such as abundant surface active sites, high catalytic activity and easy to be modified. Meanwhile, their unique advantages in regenerating and recycling on account of the magnetic performances facilitate their practical application potential. Herein, the conventional as well as green chemistry synthesis of spinel ferrites is reviewed. Most importantly, the critical pathways to improve the catalytic performance are discussed in detail, mainly covering selective doping, site substitution, structure reversal, defect introduction and coupled composites. Furthermore, the catalytic applications of spinel ferrites and their derivative composites are exclusively reviewed, including Fenton-type catalysis, photocatalysis, electrocatalysis and photoelectro-chemical catalysis. In addition, some vital remarks, including toxicity, recovery and reuse, are also covered. Future applications of spinel ferrites are envisioned focusing on environmental and energy issues, which will be pushed by the development of precise synthesis, skilled modification and advanced characterization along with emerging theoretical calculation.

Nanoparticles as Novel Emerging Therapeutic Antibacterial Agents in the Antibiotics Resistant Era

Microorganisms are highly resistant to the antibiotics that are commonly used and thus are becoming serious public health problem. There is an urgent need for new approaches to monitor microbial behavior, and hence, nanomaterial can be a very promising solution. Nanotechnology has led to generation of novel antimicrobial agents such as gold, silver, zinc, copper, poly-£-lysine, iron, and chitosan which have shown remarkable potential, demonstrating their applicability as proficient antibiotic agents against various pathogenic bacterial species. The antimicrobial nanoproduct physically kills the organism's cell membranes that prevent the production of drug-resistant microorganisms. These nanosized particles can also be used as diagnostic agents, targeted drug delivery vehicle, noninvasive imaging technologies, and in vivo visual monitoring of tumors angiogenesis. These nanomaterials provide a promising platform for diagnostics, prognostic, drug delivery, and treatment of diseases by means of nanoengineered products/devices. This owes to their small size, prolonged antimicrobial efficacy with insignificant toxicity creating less environmental hazard or toxicity. Scientists address several problems such as health, bioethical problems, toxicity risks, physiological, and pharmaceutical concerns related with the usage of NPs as antimicrobial agents as current research lack adequate data and information on the safe use of certain tools and materials.

The synthesis and characterization of targeted delivery curcumin using chitosan-magnetite-reduced graphene oxide as nano-carrier

To achieve targeted treatment with fewer adverse effects against fatal cancer diseases, the use of nanoparticles as therapeutic agents or drug carriers has been proved to be very extensive and remarkable, today. In this study, chitosan-magnetite-reduced graphene oxide (CS-Fe₃O₄-RGO) nanocomposites (NC) were used for the targeted delivery of curcumin (Cur) as anticancer drugs to suppress MCF-7 breast cancer cells and this was accomplished using a facile water-in-oil (W/O) emulsification procedure. FTIR and XRD were used for characterization. The average size distribution of nanoemulsions and their surface charge (zeta potential) were determined by Dynamic light scattering (DLS) analyzer and zeta potential measurement, respectively. SEM Mapping showed the uniform and flat surface for the NC which was confirmed by the EDX diagram. Measurement of VSM exhibited that the Fe₃O₄-RGOs have superparamagnetic properties. According to the MTT assay, the NC has the highest toxicity at 0.1 against MCF-7 cancer cells. The results of flow cytometry indicated apoptosis in MCF-7 cells. By using the dialysis method, it was determined that curcumin was released faster in an acidic medium. It is expected that the results of this study will be effective in the development of targeted drug delivery as well as the development of CS- Fe₃O₄-RGO-based drug carriers against various cancer cells during future research.

Biosynthesized magnetite nanoparticles as an environmental opulence and sustainable wastewater treatment

This review emphasizes the win-win one-pot valorization process of different waste biomass that composed of many biological macromolecules (e.g. polysaccharides, polyphenols, carbohydrates, lipids, enzymes, proteins, etc.) and other biomolecules (e.g. alkaloids, terpenoids, tannins, phenolics, carotenoids, amino acids, sugars, vitamins, etc.) into biofunctionalized magnetite (Fe₃O₄) nanoparticles (BMNPs). It illustrates the sustainable recruitment of microbial intra- and extra-cellular metabolites, proteins, and/or enzymes in the biosynthesis of BMNPs. It elucidates the environmental affluence of such sustainable, cost-effective, and ecofriendly BMNPs as an antimicrobial agent for water disinfection, photo-degrader, and adsorbent for different xenobiotics, organic and inorganic water pollutants. It confers the future environmental aspects of BMNPs in biofuels production from lipids and lignocellulosic wastes, biosensors manufacturing and bio-upgrading of petroleum fractions, etc. It discusses the circular economy, challenges, and opportunities for scaling up the zero-waste green synthesis of MNPs. Nevertheless, imminent investigations are still needed to elucidate the exact rule of biological macro- and micro- molecules in BMNPs synthesis and mechanisms involved in its microbicidal and photodegradation activities. Accentuated researches are more required on the toxicity and/or biosafety of the green synthesized BMNPs to humans and other non-target organisms to ensure its eco-safety upon environmental applications.

Endophytic Nanotechnology: An Approach to Study Scope and Potential Applications

Nanotechnology has become a very advanced and popular form of technology with huge potentials. Nanotechnology has been very well explored in the fields of electronics, automobiles, construction, medicine, and cosmetics, but the exploration of nanotecnology's use in agriculture is still limited. Due to climate change, each year around 40% of crops face abiotic and biotic stress; with the global demand for food increasing, nanotechnology is seen as the best method to mitigate challenges in disease management in crops by reducing the use of chemical inputs such as herbicides, pesticides, and fungicides. The use of these toxic chemicals is potentially harmful to humans and the environment. Therefore, using NPs as fungicides/ bactericides or as nanofertilizers, due to their small size and high surface area with high reactivity, reduces the problems in plant disease management. There are several methods that have been used to synthesize NPs, such as physical and chemical methods. Specially, we need ecofriendly and nontoxic methods for the synthesis of NPs. Some biological organisms like plants, algae, yeast, bacteria, actinomycetes, and fungi have emerged as superlative candidates for the biological synthesis of NPs (also considered as green synthesis). Among these biological methods, endophytic microorganisms have been widely used to synthesize NPs with low metallic ions, which opens a new possibility on the edge of biological nanotechnology. In this review, we will have discussed the different methods of synthesis of NPs, such as top-down, bottom-up, and green synthesis (specially including endophytic microorganisms) methods, their mechanisms, different forms of NPs, such as magnesium oxide nanoparticles (MgO-NPs), copper nanoparticles (Cu-NPs), chitosan nanoparticles (CS-NPs), β-d-glucan nanoparticles (GNPs), and engineered nanoparticles (quantum dots, metalloids, nonmetals, carbon nanomaterials, dendrimers, and liposomes), and their molecular approaches in various aspects. At the molecular level, nanoparticles, such as mesoporous silica nanoparticles (MSN) and RNA-interference molecules, can also be used as molecular tools to carry genetic material during genetic engineering of plants. In plant disease management, NPs can be used as biosensors to diagnose the disease.

Green Synthesis of Transition-Metal Nanoparticles and Their Oxides: A Review

In recent years, many researchers have begun to shift their focus onto the synthesis of nanomaterials as this field possesses an immense potential that may provide incredible technological advances in the near future. The downside of conventional synthesis techniques, such as co-precipitation, sol-gel and hydrothermal methods, is that they necessitate toxic chemicals, produce harmful by-products and require a considerable amount of energy; therefore, more sustainable fabrication routes are sought-after. Biological molecules have been previously utilized as precursors for nanoparticle synthesis, thus eliminating the negative factors involved in traditional methods. In addition, transition-metal nanoparticles possess a broad scope of applications due to their multiple oxidation states and large surface areas, thereby allowing for a higher reactivity when compared to their bulk counterpart and rendering them an interesting research topic. However, this field is still relatively unknown and unpredictable as the biosynthesis of these nanostructures from fungi, bacteria and plants yield undesired diameters and morphologies, rendering them redundant compared to their chemically synthesized counterparts. Therefore, this review aims to obtain a better understanding on the plant-mediated synthesis process of the major transition-metal and transition-metal oxide nanoparticles, and how process parameters—concentration, temperature, contact time, pH level, and calcination temperature affect their unique properties such as particle size, morphologies, and crystallinity.

Simultaneous Fe3O4 Nanoparticle Formation and Catalyst-Driven Hydrothermal Cellulose Degradation

Breakdown and utilization of cellulose are critical for the bioenergy sector; however, current cellulose-to-energy conversion schemes often consume large quantities of unrecoverable chemicals, or are expensive, due to the need for enzymes or high temperatures. In this paper, we demonstrate a new method for converting cellulose into soluble compounds using a mixture of Fe²⁺ and Fe³⁺ as catalytic centers for the breakdown, yielding Fe₃O₄ nanoparticles during the hydrothermal process. Iron precursors transformed more than 61% of microcrystalline cellulose into solutes, with the composition of the solute changing with the initial Fe³⁺ concentration. The primary products of the breakdown of cellulose were a range of aldaric acids with different molecular weights. The nanoparticles have concentration-dependent tuneable sizes between 6.7 and 15.8 nm in diameter. The production of value-added nanomaterials at low temperatures improves upon the economics of traditional cellulose-to-energy conversion schemes with the precursor value increasing rather than deteriorating over time.

Magnetite nanoparticles: Synthesis methods - A comparative review

Iron oxide-based nanoparticles have gathered tremendous scientific interest towards their application in a variety of fields. Magnetite has been particularly investigated due to its readily availability, versatility, biocompatibility, biodegradability, and special magnetic properties. As the behavior of nano-scale magnetite is in direct relation to its shape, size, and surface chemistry, accurate control over the nanoparticle synthesis process is essential in obtaining quality products for the intended end uses. Several chemical, physical, and biological methods are found in the literature and implemented in the laboratory or industrial practice. However, non-conventional methods emerged in recent years to bring unprecedented synthesis performances in terms of better-controlled morphologies, sizes, and size distribution. Particularly, microfluidic methods represent a promising technology towards smaller reagent volume use, waste reduction, precise control of fluid mixing, and ease of automation, overcoming some of the major drawbacks of conventional bulk methods. This review aims to present the main properties, applications, and synthesis methods of magnetite, together with the newest advancements in this field.

Improved delivery system for celastrol-loaded magnetic Fe3O4/α-Fe2O3 heterogeneous nanorods: HIF-1α-related apoptotic effects on SMMC-7721 cell

Fe₃O₄/α-Fe₂O₃ heterogeneous nanorods were prepared by a rapid combustion method with α-FeOOH nanorods as precursors. Fe₃O₄/α-Fe₂O₃ heterogeneous nanorods with a saturation magnetization of 33.2 emu·g^-1 were obtained using 30 mL of absolute ethanol at a calcination temperature of 300 °C. Their average length was around 140 nm, and average diameter was about 20 nm. To improve the dispersion characteristics of the Fe₃O₄/α-Fe₂O₃ heterogeneous nanorods in aqueous solution, citric acid and PEG were applied to modify the nanorod surface via the Mitsunobu reaction. The results showed that the hydrodynamic size range of Fe₃O₄/α-Fe₂O₃/CA-PEG-celastrol was 250-500 nm, the surface potential was -15 mV, and the saturation magnetization was approximately 23 emu·g^-1. The drug loading capacity of Fe₃O₄/α-Fe₂O₃/CA-PEG was larger than the non-PEG modified version. Fe₃O₄/α-Fe₂O₃/CA-PEG-celastrol had slow-release characteristics and was sensitive to changes in pH. Application of a magnetic field significantly promoted the inhibition of SMMC-7721 human liver cancer cell growth after treatment with Fe₃O₄/α-Fe₂O₃/CA-PEG-celastrol. Celastrol and Fe₃O₄/α-Fe₂O₃/CA-PEG-celastrol increased the production of reactive oxygen species in SMMC-7721 cells and promoted apoptosis and apoptosis-related proteins (p53, Bax, Bcl-2) were also changed. In addition, the expression of hypoxia-inducible factor 1α (HIF-1α) was enhanced. We may conclude that celastrol-loaded magnetic Fe₃O₄/α-Fe₂O₃ heterogeneous nanorods may be applied in the chemotherapy of human cancer with good biocompatibility and delivery.

Highly efficient sunitinib release from pH-responsive mHPMC@Chitosan core-shell nanoparticles

This study reports developing novel smart drug delivery systems (DDS) that have great importance in anticancer therapeutics. The magnetic hydroxypropyl methylcellulose (mHPMC) synthesized via in situ method and introduced in the fabrication of tripolyphosphate (TPP)-cross-linked chitosan core-shell nano-carriers (mHPMC@Chitosan). The TPP-cross-linked mHPMC@Chitosan nano-carriers then characterized using TEM, SEM/EDS, DLS, XPS, FTIR, TGA, XRD, and VSM. The encapsulation efficiency showed high capacity of loading for sunitinib malate (above 86 % for all samples). At pH 7.4, the minimum content of drug release was observed for all samples fabricated with variable contents of chitosan. At pH 4.5, the effect of chitosan content revealed that the rate of sunitinib release tends to decrease as its content increased. During two days, 44 and 93 % of the loaded sunitinib released from carriers containing high and low contents of chitosan, respectively. Besides, this mHPMC@Chitosan core shell nano-carrier shown pH-sensitive drug release.

Green Synthesis of Fe3O4 Nanoparticles Stabilized by a Garcinia mangostana Fruit Peel Extract for Hyperthermia and Anticancer Activities

INTRODUCTION

Fe3O4 nanoparticles (Fe3O4 NPs) with multiple functionalities are intriguing candidates for various biomedical applications.

MATERIALS AND METHODS

This study introduced a simple and green synthesis of Fe3O4 NPs using a low-cost stabilizer of plant waste extract rich in polyphenols content with a well-known antioxidant property as well as anticancer ability to eliminate colon cancer cells. Herein, Fe3O4 NPs were fabricated via a facile co-precipitation method using the crude extract of Garcinia mangostana fruit peel as a green stabilizer at different weight percentages (1, 2, 5, and 10 wt.%). The samples were analyzed for magnetic hyperthermia and then in vitro cytotoxicity assay was performed.

RESULTS

The XRD planes of the samples were corresponding to the standard magnetite Fe3O4 with high crystallinity. From TEM analysis, the green synthesized NPs were spherical with an average size of 13.42±1.58 nm and displayed diffraction rings of the Fe3O4 phase, which was in good agreement with the obtained XRD results. FESEM images showed that the extract covered the surface of the Fe3O4 NPs well. The magnetization values for the magnetite samples were ranging from 49.80 emu/g to 69.42 emu/g. FTIR analysis verified the functional groups of the extract compounds and their interactions with the NPs. Based on DLS results, the hydrodynamic sizes of the Fe3O4 nanofluids were below 177 nm. Furthermore, the nanofluids indicated the zeta potential values up to -34.92±1.26 mV and remained stable during four weeks of storage, showing that the extract favorably improved the colloidal stability of the Fe3O4 NPs. In the hyperthermia experiment, the magnetic nanofluids showed the acceptable specific absorption rate (SAR) values and thermosensitive performances under exposure of various alternating magnetic fields. From results of in vitro cytotoxicity assay, the killing effects of the synthesized samples against HCT116 colon cancer cells were mostly higher compared to those against CCD112 colon normal cells. Remarkably, the Fe3O4 NPs containing 10 wt.% of the extract showed a lower IC50 value (99.80 µg/mL) in HCT116 colon cancer cell line than in CCD112 colon normal cell line (140.80 µg/mL).

DISCUSSION

This research, therefore, introduced a new stabilizer of Garcinia mangostana fruit peel extract for the biosynthesis of Fe3O4 NPs with desirable physiochemical properties for potential magnetic hyperthermia and colon cancer treatment.

Evaluation of nanoparticle drug-delivery systems used in preclinical studies

Multifunctional nanoparticles have been identified as a promising drug-delivery system for sustainable drug release. The structural and size tunability and disease-targeting ability of nanoparticles have made them more suitable for multiple drug loading and delivery, thereby enhancing therapeutic results through synergistic effects. Nanoparticulate carriers with specific features such as target specificity and stimuli-responsiveness enable selective drug delivery with lower potential side effects. In this review we have classified the recently published articles on polymeric and inorganic nanoparticle-mediated drug delivery into three different categories based on functionality and discussed their efficiency for drug delivery and their therapeutic outcomes in preclinical models. Most of the drug-loaded nanodelivery systems discussed have demonstrated negligible or very low systemic toxicity throughout the experimental period in animal models compared with free drug administration. In addition, some challenges associated with the translation of nanoparticle-based drug carrier responses to clinical application are highlighted.

Sustainable plant and microbes-mediated preparation of Fe3O4 nanoparticles and industrial application of its chitosan, starch, cellulose, and dextrin-based nanocomposites as catalysts

Iron oxide nanoparticles (Fe₃O₄ NPs) attracted significant scientific interest, considering their immense diversity of usage and biocompatibility. Perceiving the growing importance of sustainable chemistry, many efforts have been made to prepare these NPs using naturally occurring materials mostly plant extracts and microbes. Magnetic NPs (MNPs) are commonly used as composites and are considered in two matters: synthesis and modification of their functional groups. Biopolymeric nanocomposites are a group of hybrid materials composed of natural polymers and inorganic nanomaterials. Biopolymers such as alginate, cellulose, starch, gelatin, chitosan, etc. have been considered extensively and provided composites with better electrical and mechanical thermal properties. Fe₃O₄ NPs incorporated in a polymer and biopolymer matrix is a good instance of the functional nanostructure, which has been able to enhance the properties of both ingredients. These hybrids can have impressive applications in various scopes such as magneto-optical storage, electromagnetic interference shielding, catalyst, water remediation, biomedical sensing, and so on. In this study, we have tried to briefly introduce Fe₃O₄ NPs, investigate the green and sustainable methods that have been suggested for its synthesis and review recent utilization of their biopolymeric nanocomposite (NC) including starch, chitosan, dextrin, etc. as catalysts and photocatalysts.

Recent advances on drug delivery nanocarriers for cerebral disorders

Pharmacotherapies for brain disorders are generally faced with obstacles from the blood-brain barrier (BBB). There are a variety of drug delivery systems that have been put forward to cross or bypass the BBB with the access to the central nervous system. Brain drug delivery systems have benefited greatly from the development of nanocarriers, including lipids, polymers and inorganic materials. Consequently, various kinds of brain drug delivery nano-systems have been established, such as liposomes, polymeric nanoparticles (PNPs), nanomicelles, nanohydrogels, dendrimers, mesoporous silica nanoparticles and magnetic iron oxide nanoparticles. The characteristics of their carriers and preparations usually differ from each other, as well as their transportation mechanisms into intracerebral lesions. In this review, different types of brain drug delivery nanocarriers are classified and summarized, especially their significant achievements, to present several recommendations and directions for future strategies of cerebral delivery.

Characterization and Inhibitory Effects of Magnetic Iron Oxide Nanoparticles Synthesized from Plant Extracts on HeLa Cells

Magnetic Fe₃O₄ nanoparticles were synthesized from maize leaves and plantain peels extract mediators. Particles were characterized, and the inhibitory effects were studied on HeLa cells in vitro using cyclic voltammetry (CV). Voltammograms from the CV show that Fe₃O₄ NPs interaction with HeLa cells affected their electrochemical behavior. The nanoparticles formed with higher Fe³⁺/Fe²⁺ molar ratio (2.8 : 1) resulted in smaller crystallite sizes compared to those formed with lower Fe³⁺/Fe²⁺ molar ratio (1.4 : 1). The particles with the smallest crystallite size showed higher anodic peak currents, whereas the larger crystallite sizes resulted in lower anodic peak currents. The peak currents relate to cell inhibition and are confirmed by the half-maximum inhibitory concentration (IC₅₀). The findings show that the particles have a different inhibitory mechanism on HeLa cells ion transfer and are promising to be further exploited for cancer treatment.

Novel Fe3O4-poly(methacryloxyethyltrimethyl ammonium chloride) adsorbent for the ultrafast and efficient removal of anionic dyes

The removal of anionic dyes from wastewater has attracted global concern. In this work, a novel Fe3O4-poly(methacryloxyethyltrimethyl ammonium chloride) (Fe3O4-pDMC) adsorbent for the efficient removal of anionic dyes from wastewater was successfully synthesized by grafting methacryloxyethyltrimethyl ammonium chloride (DMC) on the surfaces of Fe3O4. Various characterization analyses confirmed that the obtained Fe3O4-pDMC possessed numerous functional groups on its surfaces and retained good magnetic separation properties. Fe3O4-pDMC showed ultrafast removal for acid orange 7 (AO7, 58.6%, 1 min) and direct blue 15 (DB15, 98.1%, 1 min), and the maximum adsorption capacity was high (266.8 and 336.5 mg g-1 for AO7 and DB15, respectively). In addition, the adsorption process was in accordance with pseudo-second-order kinetics and the Langmuir isotherm. The mechanism underlying the adsorption of Fe3O4-pDMC on anionic dyes was mainly dependent on electrostatic interaction. This study illustrated that Fe3O4-pDMC has great potential applications as an environmentally friendly, desirable adsorbent for the efficient removal of anionic dyes from wastewater.

Magnetite (Fe3O4) Nanoparticles in Biomedical Application: From Synthesis to Surface Functionalisation

Nanotechnology has gained much attention for its potential application in medical science. Iron oxide nanoparticles have demonstrated a promising effect in various biomedical applications. In particular, magnetite (Fe3O4) nanoparticles are widely applied due to their biocompatibility, high magnetic susceptibility, chemical stability, innocuousness, high saturation magnetisation, and inexpensiveness. Magnetite (Fe3O4) exhibits superparamagnetism as its size shrinks in the single-domain region to around 20 nm, which is an essential property for use in biomedical applications. In this review, the application of magnetite nanoparticles (MNPs) in the biomedical field based on different synthesis approaches and various surface functionalisation materials was discussed. Firstly, a brief introduction on the MNP properties, such as physical, thermal, magnetic, and optical properties, is provided. Considering that the surface chemistry of MNPs plays an important role in the practical implementation of in vitro and in vivo applications, this review then focuses on several predominant synthesis methods and variations in the synthesis parameters of MNPs. The encapsulation of MNPs with organic and inorganic materials is also discussed. Finally, the most common in vivo and in vitro applications in the biomedical world are elucidated. This review aims to deliver concise information to new researchers in this field, guide them in selecting appropriate synthesis techniques for MNPs, and to enhance the surface chemistry of MNPs for their interests.