Silver nanoparticles: An integrated view of green synthesis methods, transformation in the environment, and toxicity

Silver Covalently Bound to Cyanographene Overcomes Bacterial Resistance to Silver Nanoparticles and Antibiotics

The ability of bacteria to develop resistance to antibiotics is threatening one of the pillars of modern medicine. It was recently understood that bacteria can develop resistance even to silver nanoparticles by starting to produce flagellin, a protein which induces their aggregation and deactivation. This study shows that silver covalently bound to cyanographene (GCN/Ag) kills silver-nanoparticle-resistant bacteria at concentrations 30 times lower than silver nanoparticles, a challenge which has been so far unmet. Tested also against multidrug resistant strains, the antibacterial activity of GCN/Ag is systematically found as potent as that of free ionic silver or 10 nm colloidal silver nanoparticles. Owing to the strong and multiple dative bonds between the nitrile groups of cyanographene and silver, as theory and experiments confirm, there is marginal silver ion leaching, even after six months of storage, and thus very high cytocompatibility to human cells. Molecular dynamics simulations suggest strong interaction of GCN/Ag with the bacterial membrane, and as corroborated by experiments, the antibacterial activity does not rely on the release of silver nanoparticles or ions. Endowed with these properties, GCN/Ag shows that rigid supports selectively and densely functionalized with potent silver-binding ligands, such as cyanographene, may open new avenues against microbial resistance.

Green synthesized Silver Nanoparticles as Silver Lining in Antimicrobial Resistance: A Review

Unprincipled use of antibiotics has led to the antimicrobial resistance (AMR) against mostly available compounds and now become a major cause of concern for the scientific community. However, in the past decade, green synthesized silver nanoparticles (AgNPs) have received greater attention for the development of newer therapies as antimicrobials by virtue of their unique physico-chemical properties. Unlike traditional antibiotics, AgNPs exert their action by acting on multiple mechanisms which make them potential candidates against AMR. Green synthesis of AgNPs using various medicinal plants has demonstrated broader spectrum of action against several microbes in a number of attempts. The present paper provides an insight into the scientific studies that have elucidated the positive role of plant extracts/phytochemicals during green synthesis of AgNPs and their future perspectives. The studies conducted so far seem promising still, a few factors like, the precise mechanism of action of AgNPs, their synergistic interaction with biomolecules, and industrial scalability need to be explored further till effective drug development using green synthesized AgNPs in healthcare systems against AMR is established.

Nanoparticles potentially mediate salt stress tolerance in plants

In the era of climate change, salt stress is a promising threat to agriculture, limiting crop production via imposing primary effects such as osmotic and ionic, as well as secondary effects such as oxidative stress, perturbance in hormonal homeostasis, and nutrient imbalance. On the other hand, production areas are expanding into the salt affected regions due to excessive pressure for fulfilling food security targets to meet the needs of continuously increasing human population. Accumulating evidences demonstrate that supplementation of nanoparticles to plants can significantly alleviate the injurious effects caused by various harsh conditions including salt stress, and hence, regulate adaptive mechanisms in plants. Various types of NPs and nanofertilizers have shown a promising evidence so far regarding salt stress management. In this review, we recapitulate recent pioneering progress made towards acquiring salt stress tolerance in crop plants utilizing NPs. Finally, future research directions in this domain to explicate the comprehensive roles of nanoparticles in improving salt tolerance in plants are underscored. To ensure social acceptance and safe use of NPs, some conclusive directions have been elaborated in order to achieve sustainable progress in crop production under saline environments.

A critical review on silver nanoparticles: From synthesis and applications to its mitigation through low-cost adsorption by biochar

Silver nanoparticles are one of the most beneficial forms of heavy metals in nanotechnology applications. Due to its exceptional antimicrobial properties, low electrical and thermal resistance, and surface plasmon resonance, silver nanoparticles are used in a wide variety of products, including consumer goods, healthcare, catalysts, electronics, and analytical equipment. As the production and applications of silver nanoparticles containing products increase daily, the environmental pollution due to silver nanoparticles release is increasing and affecting especially the aqueous ecosystem. Silver nanoparticles can kill useful bacteria in soil and water, and bioaccumulate in living organisms even at low concentrations from 10^-2 to 10 μg/mL silver can show antibacterial effect. On the other hand, the maximum silver discharge limit into freshwater is 0.1 μg/L and 3.2 μg/L for Australia and the USA, respectively. To reduce its toxic consequences and meet the regulatory guidelines, it is crucial to remove silver nanoparticles from wastewater before it is discharged into other water streams. Several technologies are available to remove silver nanoparticles, but the adsorption process using low-cost adsorbents is a promising alternative to mitigate silver nanoparticle pollution in the bulk stage. As one of the low-cost adsorbents, biochar produced from the biomass waste could be a suitable adsorbent. This review focuses on collating the latest evidence on silver nanoparticle production, applications, environmental consequences, and cost-effective technological approaches for silver removal from wastewater.

Nanotechnology: an efficient approach for rejuvenation of aged seeds

Modern agricultural efforts are now in search of an efficient, eco-friendly and sustainable approach for enhanced crop production. Nearly 50-60% of seeds lost occurs due to improper technical handling. Seed deterioration manifests itself as reduction in the rate of germination and growth with increased susceptibility to biotic and abiotic stresses. Furthermore, seed ageing is another economic and scientific issue that is associated with an array of internal (structural, physiological and genetic) and external (storage temperature and relative humidity) factors. Reactive oxygen species (ROS) are believed to be a key player in ageing phenomenon. However, hydrated storage, or ROS blockers are a few of the conventionally used methods to minimize the ageing process. Recently, exogenous applications of different inorganic nanoparticles (metal and metal oxide) are suggested to revitalize and revive aged seeds. Owing to their special properties of nano-size with high surface area they easily penetrate the seed coat. Exposure of nanoparticles has been suggested to neutralize the excess of ROS to a level that initiates hormonal signaling to support early emergence of radicles from the seeds. Nanotechnology has been well explored to enhance the crops nutritional quality, livestock productivity, plant protection from various stressors and in enhancement of seed quality via nanopesticides and nanofertilizers. Aiming at sustainable agriculture practices with fewer inputs, maximum benefits, ecologically safe and compatible technique the nanotechnology is an efficient approach to counteract problems of seed ageing incurring during storage, which is relatively less explored and unresolved conventionally, in general.

A review on biosynthesis of metal nanoparticles and its environmental applications

Nanotechnology has become one of the emerging multi-disciplinary fields receiving universal attention and playing a substantial role in agriculture, environment and pharmacology. In spite of various techniques employed for nanoparticle synthesis such as laser ablation, mechanical milling, spinning and chemical deposition, usage of hazardous chemicals and expensiveness of the process makes it unsuitable for the continuous production. Hence the necessity of sustainable, economic and environment friendly approach development have increased in recent years. Microbial synthesis of nanoparticles connecting microbiology and nanotechnology is one of the green techniques employed for sustainable production. Gold, silver and other metal nanoparticles like platinum, palladium, molybdenum nanoparticles biosynthesis by bacteria, fungi, yeast and algae have been reported in the present review. On account of microbial rich community, several microbes have been explored for the production of nanoparticles. Nanoparticles are also employed for environmental remediation processes such as pollutant removal and detection of contaminants. Lack of monodispersity and prolonged duration of synthesis are the limitations of bio-synthesis process which can be overcome by optimization of methods of microbial cultivation and its extraction techniques. The current review describes the different microbes involved in the synthesis of nanoparticles and its environmental applications.

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

The significance of silver nanostructures has been growing considerably, thanks to their ubiquitous presence in numerous applications, including but not limited to renewable energy, electronics, biosensors, wastewater treatment, medicine, and clinical equipment. The properties of silver nanostructures, such as size, size distribution, and morphology, are strongly dependent on synthesis process conditions such as the process type, equipment type, reagent type, precursor concentration, temperature, process duration, and pH. Physical and chemical methods have been among the most common methods to synthesize silver nanostructures; however, they possess substantial disadvantages and short-comings, especially compared to green synthesis methods. On the contrary, the number of green synthesis techniques has been increasing during the last decade and they have emerged as alternative routes towards facile and effective synthesis of silver nanostructures with different morphologies. In this review, we have initially outlined the most common and popular chemical and physical methodologies and reviewed their advantages and disadvantages. Green synthesis methodologies are then discussed in detail and their advantages over chemical and physical methods have been noted. Recent studies are then reviewed in detail and the effects of essential reaction parameters, such as temperature, pH, precursor, and reagent concentration, on silver nanostructure size and morphology are discussed. Also, green synthesis techniques used for the synthesis of one-dimensional (1D) silver nanostructures have been reviewed, and the potential of alternative green reagents for their synthesis has been discussed. Furthermore, current challenges regarding the green synthesis of 1D silver nanostructures and future direction are outlined. To sum up, we aim to show the real potential of green nanotechnology towards the synthesis of silver nanostructures with various morphologies (especially 1D ones) and the possibility of altering current techniques towards more environmentally friendly, more energy-efficient, less hazardous, simpler, and cheaper procedures.

Can the properties of engineered nanoparticles be indicative of their functions and effects in plants?

The extensive applicability of engineered nanoparticles (ENPs) in various fields such as environment, agriculture, medicine or biotechnology has mostly been attributed to their better physicochemical properties as compared with conventional bulk materials. However, functions and biological effects of ENPs change across different scenarios which impede the progress in their risk assessment and safety management. This review thus intends to figure out whether properties of ENPs can be indicators of their behavior through summarizing and analyzing the available literature and knowledge. The studies have indicated that size, shape, solubility, specific surface area, surface charge and surface reactivity constitute a more accurate measure of ENPs functions and toxic effects in addition to mass concentration. Effects of ENPs are also highly dependent on dose metrics, species and strains of organisms, environmental conditions, exposure route and duration. Searching correlations between properties and functions or biological effects may serve as an effective way in understanding positive and negative impacts of ENPs. This will ensure safe design and sustainable future use of ENPs.

Biological activity of selected lichens and lichen-based Ag nanoparticles prepared by a green solid-state mechanochemical approach

Lichens dispose a wide spectrum of bioactive compounds known as secondary metabolites. Their biological effects like antioxidant and antibacterial activities are widely studied. Green synthesis of silver nanoparticles (AgNPs) is a method where the compounds/substances present in plants are used for reduction of AgNO₃instead of toxic chemicals. However, this methodology is usually a two-step process (extract preparation step and the synthesis step) performed under the elevated temperatures nad in the case of lichens, the redicing compounds are insoluble in water. These disadvantages can be overcome by a solid-state mechanochemical synthesis applied in the present study. As microorganisms are becoming more resistant to commercial antibiotics, AgNPs prepared in an environmentally friendly way represent an interesting alternative. In the present study, we compared the processing of lichen material of Pseudevernia furfuracea and Lobaria pulmonaria for extraction as well as for synthesis of AgNPs, and tested the antibacterial and antioxidant activity of the extracts. Both selected lichen species could be successfully used as reducing agents to produce AgNPs. Six different bacterial strains were tested for antibacterial activity of AgNPs-containing products and it was highly effective on all strains. However, the antioxidant activity of lichen extracts showed the lowest effect even if AgNPs are present which positively correlated with the content of total phenols and flavonoids. Both phenols and flavonoids are natural antioxidants and react with silver nitrate. Due to this fact, we observed a decrease of total phenols, total flavonoids as well as antioxidant activity when processing of lichen extracts with silver nitrate was used. We demonstrated that the formation of AgNPs increased the antibacterial activity but on the other hand reduced the antioxidant activity. Thus, antibacterial and antioxidant effects have to be treated differentially.

Polyphenols profile of pomegranate leaves and their role in green synthesis of silver nanoparticles

The current study reports on polyphenols profile of pomegranate leaves (PL) Punica granatum grown in Egypt and exhibiting their role in development of an eco-friendly method of green synthesis of silver nanoparticles (AgNPs). PL aqueous alcohol extract was fractionated, the major phenolic compound was isolated from the polyphenols rich fraction (ethyl acetate fraction) and identified by conventional and spectroscopic methods of analysis as ellagic acid. Furthermore, the fraction was standardized and analysed using UPLC-PDA-UV and LC–MS-MS techniques revealing tentative identification of 23 polyphenolic compounds, quantifying ellagic acid as 43.14 ± 0.57 μg/mg of the fraction. AgNPs were successfully synthesized with the aid of polyphenols rich fraction. This is the first report revealing the systematic optimization of the green synthesis process using various independent variables. AgNPs were characterized by adopting UV–Vis spectroscopy, FTIR, XRD, and SEM, which revealed strong SPR band within average of λ _max 425 nm and polygonal shaped nanoparticles of 26.22 nm size, respectively. The antimicrobial efficacies of AgNPs and polyphenols rich fraction were tested against Gram-positive bacteria (Bacillus subtilis, Staphylococcus aureus, and Sarcina lutea), Gram-negative bacteria (Salmonella paratyphi, Escherichia coli, and Pseudomonas aeruginosa) and fungi (Candida albicans). AgNPs showed a concentration-dependent activity against all the tested microorganisms.

Green Synthesis of Gold and Silver Nanoparticles from Plant Extracts and Their Possible Applications as Antimicrobial Agents in the Agricultural Area

Currently, metal nanoparticles have varied uses for different medical, pharmaceutical, and agricultural applications. Nanobiotechnology, combined with green chemistry, has great potential for the development of novel and necessary products that benefit human health, environment, and industries. Green chemistry has an important role due to its contribution to unconventional synthesis methods of gold and silver nanoparticles from plant extracts, which have exhibited antimicrobial potential, among other outstanding properties. Biodiversity-rich countries need to collect and convert knowledge from biological resources into processes, compounds, methods, and tools, which need to be achieved along with sustainable use and exploitation of biological diversity. Therefore, this paper describes the relevant reported green synthesis of gold and silver nanoparticles from plant extracts and their capacity as antimicrobial agents within the agricultural field for fighting against bacterial and fungal pathogens that can cause plant, waterborne, and foodborne diseases. Moreover, this work makes a brief review of nanoparticles' contribution to water treatment and the development of "environmentally-friendly" nanofertilizers, nanopesticides, and nanoherbicides, as well as presenting the harmful effects of nanoparticles accumulation in plants and soils.

Removal and recovery of silver nanoparticles by hierarchical mesoporous calcite: Performance, mechanism, and sustainable application

The widespread use of silver nanoparticles (AgNPs) inevitably leads to the environmental release of AgNPs. The released AgNPs can pose ecological risks because of their specific toxicity. However, they can also be used as secondary sources of silver metal. Herein, hierarchical mesoporous calcite (HMC) was prepared and used to remove and recover AgNPs from an aqueous solution. The batch experiments show that the HMC has high removal percentages for polyvinylpyrrolidone- and poly (vinyl alcohol)-coated AgNPs (PVP- and PVA-AgNPs) over a wide pH range of 6-10. The adsorption isotherms indicate that the maximum removal capacities are 55 and 19 mg g^-1 for PVP-AgNPs and PVA-AgNPs, respectively, corresponding to partition coefficients (PCs) of 0.55 and 0.77 mg g^-1 μM^-1. Furthermore, the removal performance is also not impaired by coexisting anions, such as Cl^-, NO₃^-, SO₄^2-, and CO₃^2-. Their removal mechanisms can be ascribed to the electrostatic attraction and chemical adsorption between the HMC and polymer-coated AgNPs. Calcium ions on the HMC surface serve as active sites for coordination with the oxygen-bearing functional groups of AgNP coatings. Moreover, the AgNPs adsorbed onto HMC show high catalytic activity and good reusability for the reduction of the organic pollutant 4-nitrophenol. This work may pave the way not only to remove metal nanopollutants from waters but also to convert them into functional materials.

New Relevant Descriptor of Linear QNAR Models for Toxicity Assessment of Silver Nanoparticles

The use of silver nanoparticles (NPs) in medical, industrial and agricultural fields is becoming more widespread every year. This leads to an increasing number of experimental toxicological and microbiological studies of silver NPs aimed at establishing the risk-benefit ratio for their application. The following key parameters affecting the biological activity of silver dispersions are traditionally taken into consideration: mean diameter of NPs, surface potential of NPs and equilibrium concentration of Ag+. These characteristics are mainly predetermined by the chemical nature of the capping agent used for stabilization. However, the extent to which they influence the biological activity and the toxicity of silver NPs varies greatly. In this work, dispersions of silver NPs stabilized with a wide array of substances of different chemical nature were used for quantitative evaluation of whether the various measurable properties of silver NPs fit as descriptors of linear QNAR (quantitative nanostructure-activity relationship) models for silver NP toxicity evaluation with respect to a model eukaryotic microorganism-Saccharomyces cerevisiae yeast cells. It was shown that among the factors that determine silver NP toxicity, the charge of particles, their colloidal stability and the ability to generate Ag+ ions carry more importance than the descriptors related to the particle size. A significant synergistic effect between the ζ-potential and the colloidal stability of silver NPs on their toxicity was also discovered. Following this, a new descriptor has been proposed for the integral characterization of the silver dispersion colloidal stability. According to the obtained data, it can be considered applicable for building QNAR models of higher efficacy. The validity testing of the proposed model for theoretical prediction of silver NP toxicity using a wide range of living organisms has shown that this new descriptor correlates with toxicity much better compared to most traditionally used descriptors. Consequently, it seems promising in terms of being used not only in situations involving the rather narrow array of the objects tested, but also for the construction of silver NP toxicity models with respect to other living organisms.

Silver Nanoparticles for Water Pollution Monitoring and Treatments: Ecosafety Challenge and Cellulose-Based Hybrids Solution

Silver nanoparticles (AgNPs) are widely used as engineered nanomaterials (ENMs) in many advanced nanotechnologies, due to their versatile, easy and cheap preparations combined with peculiar chemical-physical properties. Their increased production and integration in environmental applications including water treatment raise concerns for their impact on humans and the environment. An eco-design strategy that makes it possible to combine the best material performances with no risk for the natural ecosystems and living beings has been recently proposed. This review envisages potential hybrid solutions of AgNPs for water pollution monitoring and remediation to satisfy their successful, environmentally safe (ecosafe) application. Being extremely efficient in pollutants sensing and degradation, their ecosafe application can be achieved in combination with polymeric-based materials, especially with cellulose, by following an eco-design approach. In fact, (AgNPs)-cellulose hybrids have the double advantage of being easily produced using recycled material, with low costs and possible reuse, and of being ecosafe, if properly designed. An updated view of the use and prospects of these advanced hybrids AgNP-based materials is provided, which will surely speed their environmental application with consequent significant economic and environmental impact.

The fate and toxicity of Pb-based perovskite nanoparticles on soil bacterial community: Impacts of pH, humic acid, and divalent cations

Pb-based perovskite nanoparticles (PbPNPs) are amongst others used within highly efficient solar cells. PbPNPs can be released into the environment during their production, recycling or waste processing. In this study we investigated the fate and toxicity of PbPNPs on soil bacterial community under simulated natural environmental conditions across a range of pH, humic acid, and divalent cation concentrations. Increasing pH decreased PbPNPs-particle aggregation as well as Pb-ion release. The presence of only humic acid (HA) prevented the aggregation of PbPNPs-particles, whereas the presence of only divalent cations promoted the aggregation of PbPNPs-particles. The amount of Pb-ions released from the PbPNPs-particles was reduced in the presence of either HA or the divalent cations. Results of toxicity testing of PbPNPs by determining the metabolic potential of a bacterial community indicated that increasing pH alleviated particle toxicity. The presence of only HA reduced the toxicity of PbPNPs, while the presence of only divalent cations enhanced the particle toxicity. The coexistence of HA and divalent cations enhanced PbPNPs aggregation and reduced toxicity, with both Pb-ions and the interaction between the PbPNPs-particles and bacterial cells contributing to the toxic effects. Our study emphasized that environmental conditions play important roles that influencing the fate and toxicity of PbPNPs.

The effects of silver nanoparticles (Ag-NPs) sublethal concentrations on common carp (Cyprinus carpio): Bioaccumulation, hematology, serum biochemistry and immunology, antioxidant enzymes, and skin mucosal responses

The present study aimed to evaluate the effects of different waterborne sublethal concentrations of Ag-NPs LC₅₀ (96h) on common carp Cyprinus carpio using a multi-biomarker approach. Fish (9.22 ± 0.12 g) were stocked in fiberglass tanks and exposed to concentrations of 0 (control), 12.5%, 25% and 50% of Ag-NPs LC₅₀ (96h) or Ag-NO₃ LC₅₀ (96h), as the source of Ag⁺ ion, for a period of 21 days. At the end of study, tissue Ag contents were significantly (P < 0.05) higher and different in fish exposed to concentrations of 25% and 50% compared to the control. The numbers of RBCs, hematocrit, and MCHC values at these concentrations differed significantly in respect to the control. No significant effects were observed for hemoglobin, MCH, and MCV values. The number of WBCs was significantly higher at concentrations of 12.5% and 25% compared to the control. Meanwhile, the percentage of neutrophils significantly elevated at concentrations of 25% and 50%. Serum total protein at concentration of 50% detected significantly lower than that of 12.5% or the control. The serum albumin and globulin levels significantly declined in Ag-NPs-exposed groups versus the control. The serum ACH50 and total immunoglobulins showed significantly lower values in the treatments of 25% and 50% compared to the control. The serum glucose, cortisol, ALT, and ALP values significantly escalated upon Ag-NPs exposure. The serum SOD and CAT showed enhanced activity in the treatment of 12.5% vice versa significantly diminished at concentrations of 25% and 50% compared to the control. The exposure to the concentrations of 25% and 50% significantly dwindled the lysozyme activity and total immunoglobulin levels in skin mucus. In conclusion, sublethal concentrations of Ag-NPs LC₅₀ (96h) impaired fish health status at higher concentrations and 12.5% of Ag-NPs LC₅₀ (96h) was presumably safe for common carp aquaculture.

Biosynthesis of silver nanoparticles by Fusarium scirpi and its potential as antimicrobial agent against uropathogenic Escherichia coli biofilms

The ability of Uropathogenic Escherichia coli (UPEC) to form biofilms, can be considered an important factor that contributes to the prevalence of Urinary Tract Infections (UTIs) due to the inaccessibility of the antibiotics into the highly complex structure of the biofilm. Moreover, with the appearance of antibiotic multiresistant UPEC strains, the alternatives of treatment of UTIs are less. Silver nanoparticles (AgNPs) can be useful in the treatment of the UPEC infections due to its physicochemical properties that confer them antibacterial activity against both planktonic and biofilm structured cells. A diversity of biological methods for synthesis of AgNPs with antimicrobial activity has been widely investigated during the last decades, between these methods; the fungal-biosynthesis of AgNPs highlights as an ecofriendly, scalable and low cost method. In this study, biogenic AgNPs were synthesized with extracellular metabolites secreted by the soil fungal strain Fusarium scirpi (Ag0.5–5) by an ecofriendly, simple and efficient method. The antimicrobial activity of the biosynthesized AgNPs against UPEC was evaluated. The Minimal Inhibitory Concentration (MIC) of biogenic AgNPs over planktonic UPEC cells was 25 mg/mL, whereas a sub-MIC concentration (7.5 mg/L) was sufficient to inhibit the UPEC-biofilm formation about a 97%, or produce the disruption of an 80% of mature UPEC-biofilms demonstrating the potential of fungal-derived AgNPs to prevent UPEC infections.

Synthesis of silver nanoparticles using gallic acid-conjugated chitosan derivatives

In presented study, various chitosan derivatives containing covalently bounded gallic acid were obtained: chitosan with gallic acid (CG), quaternized chitosan with gallic acid (QCG), and succinylated chitosan with gallic acid (SCG). Chitosan derivatives were used as stabilizing and reducing agents in the synthesis of silver nanoparticles (AgNPs). The dimensional characteristics of nanomaterials were determined by transmission electron (TEM), dynamic light scattering (DLS) and atomic force (AFM) microscopy, antibacterial activity (against E. coli, S. epidermidis), cytotoxicity (HaCaT, Colo 357 cell lines) and hemocompatibility. Among all samples, QCG-AgNPs showed low toxicity in the range of studied concentrations (3.125-100 μg/ml) high stability of nanoparticle for 4 months (according to UV.spectroscopy data) the highest antibacterial activity against S. epidermidis (3.91 μg/ml). The high antibacterial activity, stability, and simplicity of the process of producing AgNPs based on the QCG derivative reveals that a new method for producing modified AgNPs deserves future consideration.

Hybrids based on borate-functionalized cellulose nanofibers and noble-metal nanoparticles as sustainable catalysts for environmental applications

Polymeric supports from renewable resources such as cellulose nanomaterials are having a direct impact on the development of heterogenous sustainable catalysts. Recently, to increase the potentiality of these materials, research has been oriented towards novel functionalization possibilities. In this study, to increase the stability of cellulose nanofiber films as catalytic supports, by limiting the solubility in water, we report the synthesis of new hybrid catalysts (HC) based on silver, gold, and platinum nanoparticles, and the corresponding bimetallic nanoparticles, supported on cellulose nanofibers (CNFs) cross-linked with borate ions. The catalysts were prepared from metal precursors reduced by the CNFs in an aqueous suspension. Metal nanoparticles supported on CNFs with a spherical shape and a mean size of 9 nm were confirmed by TEM, XRD, and SAXS. Functionalized films of HC-CNFs were obtained by adding a borate solution as a cross-linking agent. Solid-state ¹¹B NMR of films with different cross-linking degrees evidenced the presence of four different boron species of which the bis-chelate is responsible for the cross-linking of the CNFs. Also, it may be concluded that the bis-chelate and the mono-chelates modify the microstructure of the film increasing the water uptake and enhancing the catalytic activity in the reduction of 4-nitrophenol.

We report the synthesis of supported noble metal nanoparticles on cellulose nanofibers cross-linked with borate as highly efficient sustainable catalysts.

Silver nanoparticles for delivery purposes

The synthesis of nanostructured materials can be considered a research field of high importance, especially in the recent past, due to the unique properties that make these materials applicable in different fields of science and technology. Metallic nanoparticles gained significant interest due to the possibility to obtain them through biological means, among other techniques. Silver nanoparticles are some of the most investigated metallic nanoparticles, due to their recognized anticancer, antimicrobial, and antiviral potential. This chapter aims to summarize the emerging efforts to address current challenges and solutions in the treatment of infectious diseases, particularly through the use of silver nanoparticles biosynthesized via microbes and plants pathways.

Factorial design-optimized and gamma irradiation-assisted fabrication of selenium nanoparticles by chitosan and Pleurotus ostreatus fermented fenugreek for a vigorous in vitro effect against carcinoma cells

The novelty of the present work looks in the synthesis of aqueous dispersed selenium nanoparticles (Se NPs) using gamma rays with the aid of various natural macromolecules such as citrus pectin (CP), sodium alginate (Alg), chitosan (CS) and aqueous extract of fermented fenugreek powder (AEFFP) using Pleurotus ostreatus for investigating their impact in vitro toward carcinoma cell. The synthesized Se NPs were characterized by XRD, UV-Vis., DLS, HRTEM, SEM, EDX and FTIR. Nucleation and growth mechanisms were also discussed. The factorial design was applied to examine the importance of multiple parameters on Se NPs production with a special focus on temperature and gamma rays influences. FTIR spectrum exhibited the existence of several functional groups in Se NPs-capping macromolecules. Results revealed that Se NPs' size was dramatically-influenced by the type of stabilizer, precursors concentration, pH and the absorbed gamma rays dose. The current research reported the promising antitumor application of Se NPs against Ehrlich Ascites Carcinoma (EAC) and human Colon Adenocarcinoma (CACO) in vitro. The proliferation of EAC was significantly-hindered by Se NPs-CS (38.0 μg/ml) at 60 kGy (IC₅₀ = 23.12%) and Se NPs-AEFFP (19.00 μg/ml) at 15 kGy (IC₅₀ = 7.21%). Also, Se NPs control the generation of CACO cells, IC₅₀ was recorded as 25.32% for Se NPs-CS (38.0 μg/ml) and 8.57% for Se NPs-AEFFP (19.00 μg/ml).

Biological synthesis of silver nanoparticles using Rheum ribes and evaluation of their anticarcinogenic and antimicrobial potential: A novel approach in phytonanotechnology

This paper reports the anticarcinogenic and antimicrobial properties of silver nanoparticles (Ag NPs) obtained by green synthesis using the extract of Rheum ribes (R. ribes), a medicinal plant. For the synthesis of Ag NPs, the ethanolic extracts of R. ribes were used as a reducing as well as the stabilizing agent. For the characterization of Ag NPs, advanced analytical methods such as transmission electron microscopy (TEM), X-Ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and UV-vis spectrophotometry were performed. The synthesized Ag NPs obtained from R. ribes were evaluated as a cytotoxic agent against MDA-MB-231 breast carcinoma cell line. The IC₅₀ values of the nanoparticles were ranged from 165 to 99 μg/mL against MDA-MB 231 cell line for 24 h and 48 h, respectively. The results show that the use of Ag NPs at low concentrations show the toxic effect in the cancer cells. In addition, the results of experiments on gram-positive (Staphylococcus aureus (S. aureus), Methicillin-resistant Staphylococcus aureus (MRSA) and Bacillus subtilis (B. subtilis)) and gram-negative (Escherichia coli (E. coli)) bacteria showed that the Ag NPs had high antimicrobial activity. The results suggest that Ag NPs can be developed as potential anticancer and antibacterial agents.

NPs-TiO2 and Lincomycin Coexposure Induces DNA Damage in Cultured Human Amniotic Cells

Titanium dioxide nanoparticles (NPs-TiO2 or TiO2-NPs) have been employed in many commercial products such as medicines, foods and cosmetics. TiO2-NPs are able to carry antibiotics to target cells enhancing the antimicrobial efficiency; so that these nanoparticles are generally used in antibiotic capsules, like lincomycin, added as a dye. Lincomycin is usually used to treat pregnancy bacterial vaginosis and its combination with TiO2-NPs arises questions on the potential effects on fetus health. This study investigated the potential impact of TiO2-NPs and lincomycin co-exposure on human amniocytes in vitro. Cytotoxicity was evaluated with trypan blue vitality test, while genotoxic damage was performed by Comet Test, Diffusion Assay and RAPD-PCR for 48 and 72 exposure hours. Lincomycin exposure produced no genotoxic effects on amniotic cells, instead, the TiO2-NPs exposure induced genotoxicity. TiO2-NPs and lincomycin co-exposure caused significant increase of DNA fragmentation, apoptosis and DNA damage in amniocytes starting from 48 exposure hours. These results contribute to monitor the use of TiO2-NPs combined with drugs in medical application. The potential impact of antibiotics with TiO2-NPs during pregnancy could be associated with adverse effects on embryo DNA. The use of nanomaterials in drugs formulation should be strictly controlled in order to minimize risks.

Phyto-Nanocatalysts: Green Synthesis, Characterization, and Applications

Catalysis represents the cornerstone of chemistry, since catalytic processes are ubiquitous in almost all chemical processes developed for obtaining consumer goods. Nanocatalysis represents nowadays an innovative approach to obtain better properties for the catalysts: stable activity, good selectivity, easy to recover, and the possibility to be reused. Over the last few years, for the obtaining of new catalysts, classical methods—based on potential hazardous reagents—have been replaced with new methods emerged by replacing those reagents with plant extracts obtained in different conditions. Due to being diversified in morphology and chemical composition, these materials have different properties and applications, representing a promising area of research. In this context, the present review focuses on the metallic nanocatalysts’ importance, different methods of synthesis with emphasis to the natural compounds used as support, characterization techniques, parameters involved in tailoring the composition, size and shape of nanoparticles and applications in catalysis. This review presents some examples of green nanocatalysts, grouped considering their nature (mono- and bi-metallic nanoparticles, metallic oxides, sulfides, chlorides, and other complex catalysts).

Soybean Interaction with Engineered Nanomaterials: A Literature Review of Recent Data

With a continuous increase in the production and use in everyday life applications of engineered nanomaterials, concerns have appeared in the past decades related to their possible environmental toxicity and impact on edible plants (and therefore, upon human health). Soybean is one of the most commercially-important crop plants, and a perfect model for nanomaterials accumulation studies, due to its high biomass production and ease of cultivation. In this review, we aim to summarize the most recent research data concerning the impact of engineered nanomaterials on the soya bean, covering both inorganic (metal and metal-oxide nanoparticles) and organic (carbon-based) nanomaterials. The interactions between soybean plants and engineered nanomaterials are discussed in terms of positive and negative impacts on growth and production, metabolism and influences on the root-associated microbiota. Current data clearly suggests that under specific conditions, nanomaterials can negatively influence the development and metabolism of soybean plants. Moreover, in some cases, a possible risk of trophic transfer and transgenerational impact of engineered nanomaterials are suggested. Therefore, comprehensive risk-assessment studies should be carried out prior to any mass productions of potentially hazardous materials.

Polysaccharidic spent coffee grounds for silver nanoparticle immobilization as a green and highly efficient biocide

Spent coffee grounds (SCGs) contain abundant polysaccharides and several components with bioactivities. Despite many bio-functionalities, their bioactivities are not always satisfactory. Modifications of SCGs may overcome this issue. This work describes the method for reusing the SCGs as biological macromolecular supports and reducing agents to prepare silver nanoparticle (AgNP)/SCGS composites (AgNPs@SCGs) by biogenic synthesis. The AgNPs anchored on the surface of SCGs were synthesized by mixing the SCGs in AgNO₃ solution with various pH conditions at room temperature. Scanning electron microscopy (SEM) and X-ray diffractometer (XRD) analysis confirmed the reduction of silver ions to AgNPs, and showed that the pH 4.5 condition could generate uniform and impurity-free AgNPs on the surface of SCGs. Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and thermal gravimetric analysis (TGA) showed that the reducing process of AgNPs was mild and could preserve the original nature of the SCGs. The AgNPs@SCGs composites exhibited an excellent antimicrobial ability against S. aureus and E. coli compared to SCGs. The transformation of the polysaccharidic SCGs to AgNPs@SCGs composites by the green and sustainable method makes them highly valuable for developing the applications on antimicrobial products.