Anion insertion enhanced electrodeposition of robust metal hydroxide/oxide electrodes for oxygen evolution

Electrocatalytic water oxidation performance in an extended porous organic framework with a covalent alliance of distinct Ru sites

The rational synthesis of durable, earth-abundant efficient electrocatalysts for the oxygen evolution reaction (OER) from water is one of the most important routes for storing renewable energy and minimizing fossil fuel combustion. The prime hurdles for effectively utilizing commercial RuO₂ as (OER) electrocatalysts are its very low stability, catalyst deactivation, and high cost. In this work, we explored a Ru-integrated porous organic polymer (Ru@Bpy-POP) by a facile one-pot Friedel-Crafts alkylation strategy between redox-active (Ru(demob)3Cl2) and a carbazole unit, which is composed of unique features including an extended framework unit, isolated active sites, and tunable electrode kinetics. Ru@Bpy-POP can serve as a bridge between a Metal-Organic Framework (MOF) and POP-based catalytic systems with a balanced combination of covalent bonds (structural stability) and open metal sites (single site catalysis). Ru@Bpy-POP, deposited on a three-dimensional nickel foam electrode support, exhibits a promising electrocatalytic OER activity with an ultra-low ruthenium loading compared to a benchmark RuO₂ catalyst, providing an overpotential of about 270 mV to reach 10 mA cm^-2 in an alkaline medium. Moreover, a high current density of 248 mA cm^-2 was achieved for the Ru@Bpy-POP catalyst at only 1.6 V (vs. RHE), which is much higher than 91 mA cm^-2 for commercial RuO₂. The robust, albeit highly conjugated, POP framework not only triggered facile electro-kinetics but also suppressed aggregation and metallic corrosion during electrolysis. In particular, the benefits of covalent integration of distinct Ru sites into the framework can modulate intermediate adsorption and charge density, which contributes to its exceptional OER activity. All of the critical steps involved in OER are complemented by Density Functional Theory (DFT) calculations, which suggest that electrocatalytic water oxidation proceeds from a closed-shell configuration to open-shell electronic configurations with high-spin states. These open-shell configurations are more stable than their closed-shell counterparts by 1 eV, improving the overall catalytic activity.

Temperature-Induced Structure Transformation from Co0.85Se to Orthorhombic Phase CoSe2 Realizing Enhanced Hydrogen Evolution Catalysis

Transition-metal chalcogenides (TMC) have been widely studied as active electrocatalysts toward the hydrogen evolution reaction due to their suitable d-electron configuration and relatively high electrical conductivity. Herein, we develop a feasible method to synthesize an orthorhombic phase of CoSe₂ (o-CoSe₂) from the regeneration of Co_0.85Se, where the temperature plays a key role in controlling the structure transformation. To the best of our knowledge, this is the first report about this synthetic route for o-CoSe₂. The resulting o-CoSe₂ catalysts exhibit enhanced hydrogen evolution reaction performance with an overpotential of 220 mV to reach 10 mA cm^-2 in 1.0 M KOH. Density functional theory calculations further reveal that the change in the Gibbs free energy of hydrogen, water adsorption energy, and the downshifted d-band center make o-CoSe₂ more suitable for accelerating the HER process.

Mesoporous Single Crystals with Fe-Rich Skin for Ultralow Overpotential in Oxygen Evolution Catalysis

The oxygen evolution reaction (OER) is a key reaction in water splitting and metal-air batteries, and transition metal hydroxides have demonstrated the most electrocatalytic efficiency. Making the hydroxides thinner for more surface commonly fails to increase the active site number, because the real active sites are the edges. Up to now, the overpotentials of most state-of-the-art OER electrocatalysts at a current density of 10 mA cm^-2 (η₁₀ ) are still larger than 200 mV. Herein, a novel design of mesoporous single crystal (MSC) with an Fe-rich skin to boost the OER is shown. The edges around the mesopores provide lots of real active sites and the Fe modification on these sites further improves the intrinsic activity. As a result, an ultralow η₁₀ of 185 mV is achieved, and the turnover frequency based on Fe atoms is as high as 16.9 s^-1 at an overpotential of 350 mV. Moreover, the catalyst has an excellent catalytic stability, indicated by a negligible current drop after 10 000 cyclic voltammetry cycles. The catalyst enables Zn-air batteries to run stably over 270 h with a low charge voltage of 1.89 V. This work shows that MSC materials can provide new opportunities for the design of electrocatalysts.

Recent Advances in Design of Electrocatalysts for High-Current-Density Water Splitting

Electrochemical water splitting technology for producing "green hydrogen" is important for the global mission of carbon neutrality. Electrocatalysts with decent performance at high current densities play a central role in the industrial implementation of this technology. This field has advanced immensely in recent years, as witnessed by many types of catalysts designed and synthesized toward industriallyrelevant current densities (>200 mA cm^-2 ). By discussing recent advances in this field, several key aspects are summarized that affect the catalytic performance for high-current-density electrocatalysis, including dimensionality of catalysts, surface chemistry, electron transport path, morphology, and catalyst-electrolyte interplay. The multiscale design strategy that considers these aspects comprehensively for developing high-current-density electrocatalysts are highlighted. The perspectives on the future directions in this emerging field are also put forward.

Magneto-Electrodeposition of 3D Cross-Linked NiCo-LDH for Flexible High-Performance Supercapacitors

Layered double hydroxides (LDHs) with outstanding redox activity on flexible current collectors can serve as ideal cathode materials for flexible hybrid supercapacitors in wearable energy storage devices. Electrodeposition is a facile, time-saving, and economical technique to fabricate LDHs. The limited loading mass induced by insufficient mass transport and finite exposure of active sites, however, greatly hinders the improvement of areal capacity. Herein, magneto-electrodeposition (MED) under high magnetic fields up to 9 T is developed to fabricate NiCo-LDH on flexible carbon cloth (CC) as well as Ti₃ C₂ T_x functionalized CC. Owing to the magneto-hydrodynamic effect induced by magnetic-electric field coupling, the loading mass and exposure of active sites are significantly increased. Moreover, a 3D cross-linked nest-like microstructure is constructed. The MED-derived NiCo-LDH delivers an ultrahigh areal capacity of 3.12 C cm^-2 at 1 mA cm^-2 and as-fabricated flexible hybrid supercapacitors show an excellent energy density with an outstanding cycling stability. This work provides a novel route to improve electrochemical performances of layered materials through MED technique.

Co4 N-Decorated 3D Wood-Derived Carbon Host Enables Enhanced Cathodic Electrocatalysis and Homogeneous Lithium Deposition for Lithium-Sulfur Full Cells

The sluggish kinetics of sulfur conversion in the cathode and the nonuniform deposition of lithium metal at the anode result in severe capacity decay and poor cycle life for lithium-sulfur (Li-S) batteries. Resolving these deficiencies is the most direct route toward achieving practical cells of this chemistry. Herein, a vertically aligned wood-derived carbon plate decorated with Co₄ N nanoparticles host (Co₄ N/WCP) is proposed that can serve as a host for both the sulfur cathode and the metallic lithium anode. This Co₄ N/WCP electrode host drastically enhances the reaction kinetics in the sulfur cathode and homogenizes the electric field at the anode for the uniform lithium plating. Density functional theory calculations confirm the experimental observations that Co₄ N/WCP provides a lower energy barrier for the polysulfide redox reaction in the cathode and a low adsorption energy for lithium deposition at the anode. Employing the Co₄ N/WCP host at both electrodes in a S@Co₄ N/WCP||Li@Co₄ N/WCP full cell delivers a specific capacity of 807.9 mAh g^-1 after 500 cycles at a 1 C rate. Additional experiments are performed with high areal sulfur loading of 4 mg cm^-2 to demonstrate the viability of this strategy for producing practical Li-S cells.

W Doping in Ni12P5 as a Platform to Enhance Overall Electrochemical Water Splitting

Bifunctional electrocatalysts for efficient hydrogen generation from water splitting must overcome both the sluggish water dissociation step of the alkaline hydrogen evolution half-reaction (HER) and the kinetic barrier of the anodic oxygen evolution half-reaction (OER). Nickel phosphides are a promising catalysts family and are known to develop a thin active layer of oxidized Ni in an alkaline medium. Here, Ni₁₂P₅ was recognized as a suitable platform for the electrochemical production of γ-NiOOH─a particularly active phase─because of its matching crystallographic structure. The incorporation of tungsten by doping produces additional surface roughness, increases the electrochemical surface area (ESCA), and reduces the energy barrier for electron-coupled water dissociation (the Volmer step for the formation of H_ads). When serving as both the anode and cathode, the 15% W-Ni₁₂P₅ catalyst provides an overall water splitting current density of 10 mA cm^-2 at a cell voltage of only 1.73 V with good durability, making it a promising bifunctional catalyst for practical water electrolysis.

Crystal-amorphous NiO/MoO2 with high-density interface for hydrogen evolution

Distinctive interfacial catalysis play a vital role for achieving ultrahigh activity for hydrogen evolution reaction (HER) under alkaline media. In fact, the optimized regulation of electronic structure of heterostructures interface...

Anchoring Co3S4 nanowires on NiCo2O4 nanosheet arrays as high-performance electrocatalyst for hydrogen and oxygen evolution

The development of catalysts which can substitute expensive metals to efficiently split water is currently a hot research topic. Here, multi-layered NF/NiCo2O4/Co3S4 nanocomposite was prepared on 3D porous nickel foam...

Phosphorous Doped Two-dimensional CoFe2O4 Nanobelt Decorated with Ru Nanoclusters and Co-Fe Hydroxide as Efficient Electrocatalysts Toward Hydrogen Generation

Developing efficient and durable hydrogen evolution reaction (HER) electrocatalysts has attracted considerable concerns for large-scale hydrogen generation. In this work, phosphorous doped two-dimensional (2D) CoFe2O4 nanobelt decorated with Ru and...

Superimposed OER and UOR performances by the interaction of each component in an Fe–Mn electrocatalyst

An Fe–Mn based OER and UOR bifunctional catalyst is synthesized through electrodeposition. Mn serves as a co-catalyst of Fe for OER. Both Mn and Fe act as active sites for UOR.

MOF-on-MOF Strategy to Construct a Nitrogen-Doped Carbon-Incorporated CoP@Fe-CoP Core-Shelled Heterostructure for High-Performance Overall Water Splitting

The design and preparation of efficient and low-cost catalysts for water electrolysis are crucial and highly desirable to produce eco-friendly and sustainable hydrogen fuel. Herein, we prepared nitrogen-doped carbon-incorporated CoP@Fe-CoP core-shelled nanorod arrays grown on Ni foam (CoP@Fe-CoP/NC/NF) through phosphorization of ZIF-67@Co-Fe Prussian blue analogue (ZIF-67@CoFe-PBA). The hierarchical nanorod arrays combined with the core-shelled structure offer favorable mass/electron transport capacity and maximize the active sites, thus enhancing the electrochemically active surface area. The synergistic effect of the bimetallic components and the nitrogen-doped carbon matrix endow the composite with an optimized electronic structure. Benefiting from the above superiorities of morphological and chemical compositions, this self-supported CoP@Fe-CoP/NC/NF heterostructure can drive alkaline hydrogen evolution reaction and oxygen evolution reaction with overpotentials of 97 and 270 mV to yield 100 mA cm^-2, respectively. The two-electrode alkaline electrolyzer constructed by this heterostructure shows a low cell voltage of 1.58 V to yield 10 mA cm^-2, superior to the precious-metal-based electrocatalyst apparatus (IrO₂∥Pt/C). This study offers a feasible and facile approach to develop efficient electrocatalysts for water electrolysis, which applies to other electrochemical energy conversion and storage applications.

Designing Self-Supported Electrocatalysts for Electrochemical Water Splitting: Surface/Interface Engineering toward Enhanced Electrocatalytic Performance

Electrochemical water splitting is regarded as the most attractive technique to store renewable electricity in the form of hydrogen fuel. However, the corresponding anodic oxygen evolution reaction (OER) and cathodic hydrogen evolution reaction (HER) remain challenging, which exhibit complex reactions and sluggish kinetic behaviors at the triple-phase interface. Material surface and interface engineering provide a feasible approach to improve catalytic activity. Besides, self-supported electrocatalysts have been proven to be highly efficient toward water splitting, because of the regulated catalyst/substrate interface. In this Review, the state-of-the-art achievements in self-supported electrocatalyst for HER/OER have demonstrated the feasibility of surface and interface engineering strategies to boost performance. The six key effective surface/interface engineering approaches for rational catalysts design are systematically reviewed, including defect engineering, morphology engineering, crystallographic tailoring, heterostructure design, catalyst/substrate interface engineering, and catalyst/electrolyte interface regulation. Finally, the challenges and opportunities on the valuable directions are proposed to inspire future investigation of highly active and durable HER/OER electrocatalysts.

Iron-Facilitated Transformation of Mesoporous Spinel Nanosheets into Oxyhydroxide Active Species in the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is critical for many clean energy conversion and storage technologies because it contributes the electrons required for converting renewable electricity into value-added chemicals. Electrocatalysts can promote the sluggish oxygen evolution process involving four-electron transfer. Herein, we prepare mesoporous spinel oxide nanosheets and develop an efficient strategy using Fe substitution to enable mesoporous NiCo₂O₄ nanosheets to generate superior active centers for the OER. Additionally, the iron substitution also promotes the preoxidation of Co/Ni and facilitates the formation of active species. Raman spectroscopy data reveal that the active species of mesoporous NiCo₂O₄ nanosheets for the OER is NiCo₂O₄ itself, and the active species of Fe substitution in NiCo₂O₄ nanosheets are Ni(Co) oxyhydroxides. Therefore, the iron substitution is beneficial to facilitate the transformation of spinel NiCo₂O₄ into active Ni(Co) oxyhydroxides under OER conditions. Owing to the mesoporous nanosheet structure and the formation of oxyhydroxide active species, the optimized mesoporous Fe_0.2Ni_0.8Co₂O₄ nanosheet catalyst exhibits a low overpotential of 270 mV to deliver a current density of 10 mA cm^-2 and a small Tafel slope of 39 mV dec^-1 for the oxygen evolution reaction in alkaline media.

Nickel Boride/Boron Carbide Particles Embedded in Boron-Doped Phenolic Resin-Derived Carbon Coating on Nickel Foam for Oxygen Evolution Catalysis in Water and Seawater Splitting

Electrolysis of seawater can be a promising technology, but chloride ions in seawater can lead to adverse side reactions and the corrosion of electrodes. A new transition metal boride-based self-supported electrocatalyst was prepared for efficient seawater electrolysis by directly soaking nickel foam (NF) in a mixture of phenolic resin (PR) and boron carbide (B₄ C), followed by an 800 °C annealing. During PR carbonization process, the reaction of B₄ C and NF generated nickel boride (Ni_x B) with high catalytic activity, while PR-derived carbon coating was doped with boron atoms from B₄ C (B-C_PR ). The B-C_PR coating fixed Ni_x B/B₄ C particles in the frames and holes to improve the space utilization of NF. Meanwhile, the B-C_PR coating effectively protected the catalyst from the corrosion by seawater and facilitates the transport of electrons. The optimal Ni_x B/B₄ C/B-C_PR /NF required 1.50 and 1.58 V to deliver 100 and 500 mA cm^-2 , respectively, in alkaline natural seawater for the oxygen evolution reaction.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

Nanoscale electrodeposition: Dimension control and 3D conformality

Electrodeposition with a long history has been considered one of the important synthesis techniques for applying various applications. It is a feasible route for fabricating nanostructures using diverse materials due to its simplicity, cost-effectiveness, flexibility, and ease of reaction control. Herein, we mainly focus on the nanoscale electrodeposition with respect to dimension control and three-dimensional (3D) conformality. The principles of electrodeposition, dimensional design of materials, and uniform coatings on various substrates are presented. We introduce that manipulating synthesis parameters such as precursors, applied current/voltage, and additives affect the synthesis reaction, resulting in not only dimensional control of materials from three-dimensional structures to zero-dimensional atomic-level but also conformal coatings on complicated substrates. Various cases regarding morphology control of metal (hydro)oxides, metals, and metal-organic frameworks according to electrodeposition conditions are summarized. Lastly, recent studies of applications such as batteries, photoelectrodes, and electrocatalysts using electrodeposited materials are summarized. This review represents significant advances in the nanoscale design of materials through methodological approaches, which are highly attractive from both academic and commercial aspects.

Boosting Oxygen Evolution Reaction on Metallocene-based Transition Metal Sulfides Integrated with N-doped Carbon Nanostructures

In this study, utilizing metallocene and organosulfur chelating agent, an innovative synthetic route was developed towards electrochemically activated transition metal sulfides entrapped in pyridinic nitrogen-incorporated carbon nanostructures for superior oxygen evolution reaction (OER). Most importantly, the preferential electrochemical activation process, which consisted of both anodic and cathodic pre-treatment steps, strikingly enhanced OER and long-lasting cyclic stability. The substantial increase in OER electrocatalytic activity of Ni₉ S₈ /Ni₃ S₂ -NC and Co₉ S₈ -NC during the activation process was mainly attributed to the increase of faradaic active site density on the catalytic layer resulting from the reconstruction of catalytic interfaces. It was also found that Fe-based metallocene [ferrocene (Fc)]-incorporation in the Co₉ S₈ -NC and Ni₉ S₈ /Ni₃ S₂ -NC nanostructures significantly boosted the OER activity. Thus, the combined effects of Fc-incorporation and the electrochemical activation process reduced the overpotential to about 115 and 95 mV on the Ni₉ S₈ /Ni₃ S₂ -NC and Co₉ S₈ -NC nanostructures to derive a current density of 10 mA cm^-2 , respectively. Notably, Fc-Ni₉ S₈ /Ni₃ S₂ -NC electrocatalysts required very small overpotentials of around 222, 244, and 280 mV to acquire the current densities of 10, 20, and 50 mA cm^-2 , respectively. This work opens up a new avenue for superior OER electrocatalysts by the utilization of metallocene and the preferential electrochemical activation process.

Selective cobalt and nickel electrodeposition for lithium-ion battery recycling through integrated electrolyte and interface control

Molecularly-selective metal separations are key to sustainable recycling of Li-ion battery electrodes. However, metals with close reduction potentials present a fundamental challenge for selective electrodeposition, especially for critical elements such as cobalt and nickel. Here, we demonstrate the synergistic combination of electrolyte control and interfacial design to achieve molecular selectivity for cobalt and nickel during potential-dependent electrodeposition. Concentrated chloride allows for the speciation control via distinct formation of anionic cobalt chloride complex (CoCl42-), while maintaining nickel in the cationic form ([Ni(H2O)5Cl]+). Furthermore, functionalizing electrodes with a positively charged polyelectrolyte (i.e., poly(diallyldimethylammonium) chloride) changes the mobility of CoCl42- by electrostatic stabilization, which tunes cobalt selectivity depending on the polyelectrolyte loading. This strategy is applied for the multicomponent metal recovery from commercially-sourced lithium nickel manganese cobalt oxide electrodes. We report a final purity of 96.4 ± 3.1% and 94.1 ± 2.3% for cobalt and nickel, respectively. Based on a technoeconomic analysis, we identify the limiting costs arising from the background electrolyte, and provide a promising outlook of selective electrodeposition as an efficient separation approach for battery recycling.

Constructing urchin-like Ni3S2@Ni3B on Ni plate as a highly efficient bifunctional electrocatalyst for water splitting reaction

Developing efficient and promising non-noble catalysts that can promote both the HER and OER in the same electrolyte is vital. Currently, these reported bifunctional catalysts show only moderate electrocatalytic water-splitting performance, which is much lower than expected. In addition, most of these promising nonprecious electrocatalysts work well only at small current densities (e.g. 10 mA cm^-1), but at large current densities their stability and activity are far from satisfactory for practical applications. Herein, we have successfully constructed an urchin-like Ni₃S₂@Ni₃B heterostructure electrocatalyst on Ni plates. The resulting material exhibits great catalytic activities for both the HER and OER, even at large current densities, reaching a current density of 1000 mA cm^-l at relatively low applied overpotentials of 517 and 632 mV, respectively. The excellent catalytic performance of Ni₃S₂@Ni₃B/NP is found to benefit from the effective integration of the unique surface structure and the interface electronic structure.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.

Engineering Self-Reconstruction via Flexible Components in Layered Double Hydroxides for Superior-Evolving Performance

Most transition metal-based catalysts for electrocatalytic oxygen evolution reaction (OER) undergo surface reconstruction to generate real active sites favorable for high OER performance. Herein, how to use self-reconstruction as an efficient strategy to develop novel and robust OER catalysts by designing pre-catalysts with flexible components susceptible to OER conditions is proposed. The NiFe-based layered double hydroxides (LDHs) intercalated with resoluble molybdate (MoO₄ ^2- ) anions in interlayers are constructed and then demonstrated to achieve complete electrochemical self-reconstruction (ECSR) into active NiFe-oxyhydroxides (NiFeOOH) beneficial to alkaline OER. Various ex situ and in situ techniques are used to capture structural evolution process including fast dissolution of MoO₄ ^2- and deep reconstruction to NiFeOOH upon simultaneous hydroxyl invasion and electro-oxidation. The obtained NiFeOOH exhibits an excellent OER performance with an overpotential of only 268 mV at 50 mA cm^-1 and robust durability over 45 h, much superior to NiFe-LDH and commercial IrO₂ benchmark. This work suggests that the ECSR engineering in component-flexible precursors is a promising strategy to develop highly active OER catalysts for energy conversion.

Surface-Enhanced Raman Spectroscopic Evidence of Key Intermediate Species and Role of NiFe Dual-Catalytic Center in Water Oxidation

NiFe-based electrocatalysts have attracted great interests due to the low price and high activity in oxygen evolution reaction (OER). However, the complex reaction mechanism of NiFe-catalyzed OER has not been fully explored yet. Detection of intermediate species can bridge the gap between OER performances and catalyst component/structure properties. Here, we performed label-free surface-enhanced Raman spectroscopic (SERS) monitoring of interfacial OER process on Ni₃ FeO_x nanoparticles (NPs) in alkaline medium. By using bifunctional Au@Ni₃ FeO_x core-satellite superstructures as Raman signal enhancer, we found direct spectroscopic evidence of intermediate O-O^- species. According to the SERS results, Fe atoms are the catalytic sites for the initial OH^- to O-O^- oxidation. The O-O^- species adsorbed across neighboring Fe and Ni sites experiences further oxidation caused by electron transfer to Ni^III and eventually forms O₂ product.

Oxygen-evolving catalytic atoms on metal carbides

Single-atom catalysts have shown promising performance in various catalytic reactions. Catalytic metal sites supported on oxides or carbonaceous materials are usually strongly coordinated by oxygen or heteroatoms, which naturally affects their electronic environment and consequently their catalytic activity. Here, we reveal the stabilization of single-atom catalysts on tungsten carbides without the aid of heteroatom coordination for efficient catalysis of the oxygen evolution reaction (OER). Benefiting from the unique structure of tungsten carbides, the atomic FeNi catalytic sites are weakly bonded with the surface W and C atoms. The reported catalyst shows a low overpotential of 237 mV at 10 mA cm^-2, which can even be lowered to 211 mV when the FeNi content is increased, a high turnover frequency value of 4.96 s^-1 (η = 300 mV) and good stability (1,000 h). Density functional theory calculations show that either metallic Fe/Ni atoms or (hydro)oxide FeNi species are responsible for the high OER activity. We suggest that the application of inexpensive and durable WC_x supports opens up a promising pathway to develop further single-atom catalysts for electrochemical catalytic reactions.

High-Performance Bifunctional Ni-Fe-S Catalyst in situ Synthesized within Graphite Intergranular Nanopores for Overall Water Splitting

Low-cost and efficient bifunctional catalysts are urgently needed for overall water splitting used in large-scale energy storage. In this study, we develop a nickel and iron (di)sulfide (Ni-Fe-S) composite catalyst that is in situ synthesized and fixed within the intergranular nanopores inside high pure polycrystalline graphite. Two precursor solutions (reactants) may permeate the graphite intergranular pores to a depth of more than 3.5 mm. The nanoscale pores serve as an array of nanoreactors for the synthesis of the Ni-Fe-S nanoparticles under conditions much milder than usual. The prepared catalyst efficiently catalyzes both the hydrogen and oxygen evolution reactions (HER and OER) in 1.0 M KOH. It delivers a current density of 400 mA cm^-2 at a full cell voltage of around 2.3 V without considerable activity decay over 24 h electrolysis. The active species of the catalyst are different for the HER and OER and discussed accordingly. The synthesis strategy based on the nanopores in a monolithic conductive substrate proves to be a simple, efficient, and promising way to prepare electrocatalysts that are cheap, abundant, and industrially attractive.

Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction

A climax in the development of cost-effective and high-efficiency transition metal-based electrocatalysts has been witnessed recently for sustainable energy and related conversion technologies. In this regard, structure-activity relationships based on several descriptors have already been proposed to rationally design electrocatalysts. However, the dynamic reconstruction of the surface structures and compositions of catalysts during electrocatalytic water oxidation, especially during the anodic oxygen evolution reaction (OER), complicate the streamlined prediction of the catalytic activity. With the achievements in operando and in situ techniques, it has been found that electrocatalysts undergo surface reconstruction to form the actual active species in situ accompanied with an increase in their oxidation state during OER in alkaline solution. Accordingly, a thorough understanding of the surface reconstruction process plays a critical role in establishing unambiguous structure-composition-property relationships in pursuit of high-efficiency electrocatalysts. However, several issues still need to be explored before high electrocatalytic activities can be realized, as follows: (1) the identification of initiators and pathways for surface reconstruction, (2) establishing the relationships between structure, composition, and electrocatalytic activity, and (3) the rational manipulation of in situ catalyst surface reconstruction. In this review, the recent progress in the surface reconstruction of transition metal-based OER catalysts including oxides, non-oxides, hydroxides and alloys is summarized, emphasizing the fundamental understanding of reconstruction behavior from the original precatalysts to the actual catalysts based on operando analysis and theoretical calculations. The state-of-the-art strategies to tailor the surface reconstruction such as substituting/doping with metals, introducing anions, incorporating oxygen vacancies, tuning morphologies and exploiting plasmonic/thermal/photothermal effects are then introduced. Notably, comprehensive operando/in situ characterization together with computational calculations are responsible for unveiling the improvement mechanism for OER. By delivering the progress, strategies, insights, techniques, and perspectives, this review will provide a comprehensive understanding of the surface reconstruction in transition metal-based OER catalysts and future guidelines for their rational development.

Clean and Affordable Hydrogen Fuel from Alkaline Water Splitting: Past, Recent Progress, and Future Prospects

Hydrogen economy has emerged as a very promising alternative to the current hydrocarbon economy, which involves the process of harvesting renewable energy to split water into hydrogen and oxygen and then further utilization of clean hydrogen fuel. The production of hydrogen by water electrolysis is an essential prerequisite of the hydrogen economy with zero carbon emission. Among various water electrolysis technologies, alkaline water splitting has been commercialized for more than 100 years, representing the most mature and economic technology. Here, the historic development of water electrolysis is overviewed, and several critical electrochemical parameters are discussed. After that, advanced nonprecious metal electrocatalysts that emerged recently for negotiating the alkaline oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are discussed, including transition metal oxides, (oxy)hydroxides, chalcogenides, phosphides, and nitrides for the OER, as well as transition metal alloys, chalcogenides, phosphides, and carbides for the HER. In this section, particular attention is paid to the catalyst synthesis, activity and stability challenges, performance improvement, and industry-relevant developments. Some recent works about scaled-up catalyst synthesis, novel electrode designs, and alkaline seawater electrolysis are also spotlighted. Finally, an outlook on future challenges and opportunities for alkaline water splitting is offered, and potential future directions are speculated.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

Large-area patterning of full-color quantum dot arrays beyond 1000 pixels per inch by selective electrophoretic deposition

Colloidal quantum dot (QD) emitters show great promise in the development of next-generation displays. Although various solution-processed techniques have been developed for nanomaterials, high-resolution and uniform patterning technology amicable to manufacturing is still missing. Here, we present large-area, high-resolution, full-color QD patterning utilizing a selective electrophoretic deposition (SEPD) technique. This technique utilizes photolithography combined with SEPD to achieve uniform and fast fabrication, low-cost QD patterning in large-area beyond 1,000 pixels-per-inch. The QD patterns only deposited on selective electrodes with precisely controlled thickness in a large range, which could cater for various optoelectronic devices. The adjustable surface morphology, packing density and refractive index of QD films enable higher efficiency compared to conventional solution-processed methods. We further demonstrate the versatility of our approach to integrate various QDs into large-area arrays of full-color emitting pixels and QLEDs with good performance. The results suggest a manufacture-viable technology for commercialization of QD-based displays.

Colloidal quantum dots are promising for next-generation displays, yet the technology to realise high-resolution and uniform patterning is still scarce. Here, the authors report full-colour QD large area patterning by combining photolithography and selective electrophoretic deposition technique.

Engineering single-atomic ruthenium catalytic sites on defective nickel-iron layered double hydroxide for overall water splitting

Rational design of single atom catalyst is critical for efficient sustainable energy conversion. However, the atomic-level control of active sites is essential for electrocatalytic materials in alkaline electrolyte. Moreover, well-defined surface structures lead to in-depth understanding of catalytic mechanisms. Herein, we report a single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets (Ru₁/D-NiFe LDH). Under precise regulation of local coordination environments of catalytically active sites and the existence of the defects, Ru₁/D-NiFe LDH delivers an ultralow overpotential of 18 mV at 10 mA cm⁻² for hydrogen evolution reaction, surpassing the commercial Pt/C catalyst. Density functional theory calculations reveal that Ru₁/D-NiFe LDH optimizes the adsorption energies of intermediates for hydrogen evolution reaction and promotes the O–O coupling at a Ru–O active site for oxygen evolution reaction. The Ru₁/D-NiFe LDH as an ideal model reveals superior water splitting performance with potential for the development of promising water-alkali electrocatalysts.

Rational design of single atom catalyst is critical for efficient sustainable energy conversion. Single-atomic-site ruthenium stabilized on defective nickel-iron layered double hydroxide nanosheets achieve superior HER and OER performance in alkaline media.

Electrochemical Polymer Pen Lithography

The development of a massively parallel lithographic technique called electrochemical polymer pen lithography is reported. Pyramidal pen arrays, consisting of more than 10 000 hydrogel pens loaded with metal salts, are integrated into a three-electrode cell and used to locally reduce ions at each pen tip. This system enables high-throughput patterning of a variety of metallic inks (e.g., Ni²⁺ , Pt²⁺ , Ag⁺ ) on the nanometer to micrometer length scale. By incorporating a z-direction piezo actuator, the extension length and dwell time can be used to precisely define feature dimensions (210 to 10 µm in width, and up to 900 nm in height, thus far). Furthermore, by controlling the potential and precursor concentrations, more than one element can be simultaneously deposited, creating a new tool for the synthesis of alloy features, such as NiCo, which are relevant for catalysis. Importantly, this methodology enables fine control over feature size and composition in a single pattern, which may make it ultimately useful for rapid, high-throughput combinatorial screening of metallic features.

Covalent SO Bonding Enables Enhanced Photoelectrochemical Performance of Cu2 S/Fe2 O3 Heterojunction for Water Splitting

The severe charge recombination and the sluggish kinetic for oxygen evolution reaction have largely limited the application of hematite (α-Fe₂ O₃ ) for water splitting. Herein, the construction of Cu₂ S/Fe₂ O₃ heterojunction and discover that the formation of covalent SO bonds between Cu₂ S and Fe₂ O₃ can significantly improve the photoelectrochemical performance and stability for water splitting is reported. Compared with bare Fe₂ O₃ , the heterostructure of Cu₂ S/Fe₂ O₃ endows the resulting electrode with enhanced charge separation and transfer, extended range for light absorption, and reduced charge recombination rate. Additionally, due to the photothermal properties of Cu₂ S, the heterostructure exhibits locally a higher temperature under illumination, profitable for increasing the rate of oxygen evolution reaction. Consequently, the photocurrent density of the heterostructure is enhanced by 177% to be 1.19 mA cm^-2 at 1.23 V versus reversible hydrogen electrode. This work may provide guideline for future in the design and fabrication of highly efficient photoelectrodes for various reactions.

Hierarchical urchin-like amorphous carbon with Co-adding anchored on nickel foam: A free-standing electrode for advanced asymmetrical supercapacitors and adsorbed Pb (II)

The booming development of carbon materials is of great value for diverse applications, owing to their superior electron conductivity, unique structures, and excellent cycle lifetime. This study presents two hierarchically structured amorphous carbon materials for asymmetric supercapacitor (ASC) device: i) the MOFs-derived urchin-like amorphous carbon anchored on nickel foam (UAC@NF) as positive electrode; ii) high temperature activated graphite carbon felt (GF500) as negative electrode. This ASC device achieves a higher energy density of 0.036 mWh cm^-3 at a power density of 0.984 mW cm^-3 and demonstrates better cycling performance with 91.4% capacitance retention after 10,000 cycles, compared with the other carbon-based supercapacitor. In addition, the UAC@NF after 10,000 cycles displays much better adsorption performance for Pb (II) compared with the unused UAC@NF. We have demonstrated the relationship between carbon materials' structure and performance by combining experiment and theoretical calculation. Predominantly, our work can provide a new direction for the common development of amorphous carbon materials in the field of energy and environment.

Enhancing One-Dimensional Charge Transport in Metal-organic Framework Hexagonal Nanorods for Electrocatalytic Oxygen Evolution

Metal-organic frameworks (MOFs) have exhibited huge potential in electrocatalytic fields. However, the intrinsic low conductivity and the blockage of metal active sites by organic linkers still seriously hinder their large-scale application. In this study, as a proof of principle, constructing cofacial π-π stacking in the terminal ligand (4,4'-bipyridine) of a Ni/Fe-chain-based MOF to fabricate strong π-π interaction, in combination with unique hexagonal nanorod (HXR) structure, is found to be an effective strategy to enhance one-dimensional charge carrier efficiency and thus achieve excellent activity in the oxygen evolution reaction (OER). The approach yields a high turnover frequency (4.54 s^-1 ) in well-designed bimetallic chain-based MOFs (NiFe-HXR) at an overpotential of 350 mV, which is about 8.7 and 34.9 times higher than those in Ni-HXR (0.52 s^-1 ) and IrO₂ (0.13 s^-1 ), respectively. This work effectively combines "through-bond" channel in chain-based structure of NiFe-HXR and "through-space" transport between face-to-face terminal ligands, thus resulting in outstanding OER activity. This strategy of modulating the structure chemistry and morphology of MOFs to promote the OER may open a new perspective to synthesize MOFs for energy-relevant electrochemical reactions.

Kinetically Controlled, Scalable Synthesis of γ-FeOOH Nanosheet Arrays on Nickel Foam toward Efficient Oxygen Evolution: The Key Role of In-Situ-Generated γ-NiOOH

Layered γ-type iron oxyhydroxide (γ-FeOOH) is a promising material for various applications; however, its sheet-shaped structure often suffers from instability that results in aggregation and leads to inferior performance. Herein, a kinetically controlled hydrolysis strategy is proposed for the scalable synthesis of γ-FeOOH nanosheets arrays (NAs) with enhanced structural stability on diverse substrates at ambient conditions. The underlying mechanisms for the growth of γ-FeOOH NAs associated with their structural evolution are systematically elucidated by alkalinity-controlled synthesis and time-dependent experiments. As a proof-of-concept application, γ-FeOOH NAs are developed as electrocatalysts for the oxygen evolution reaction (OER), where the sample grown on nickel foam (NF) exhibits superior performance of high catalytic current density, small Tafel slope, and exceptional durability, which is among the top level of FeOOH-based electrocatalysts. Density functional theory calculations suggest that γ-NiOOH in situ generated from the electrooxidation of NF would induce charge accumulation on the Fe sites of γ-FeOOH NAs, leading to enhanced OER intermediates adsorption for water splitting. This work affords a new technique to rationally design and synthesize γ-FeOOH NAs for various applications.

Electrodeposition of Pt-Decorated Ni(OH)2/CeO2 Hybrid as Superior Bifunctional Electrocatalyst for Water Splitting

The facile synthesis of highly active and stable bifunctional electrocatalysts to catalyze water splitting is attractive but challenging. Herein, we report the electrodeposition of Pt-decorated Ni(OH)₂/CeO₂ (PNC) hybrid as an efficient and robust bifunctional electrocatalyst. The graphite-supported PNC catalyst delivers superior hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities over the benchmark Pt/C and RuO₂, respectively. For overall water electrolysis, the PNC hybrid only requires a cell voltage of 1.45 V at 10 mA cm⁻² and sustains over 85 h at 1000 mA cm⁻². The remarkable HER/OER performances are attributed to the superhydrophilicity and multiple effects of PNC, in which Ni(OH)₂ and CeO₂ accelerate HER on Pt due to promoted water dissociation and strong electronic interaction, while the electron-pulling Ce cations facilitate the generation of high-valence Ni OER-active species. These results suggest the promising application of PNC for H₂ production from water electrolysis.

Facile Access to an Active γ-NiOOH Electrocatalyst for Durable Water Oxidation Derived From an Intermetallic Nickel Germanide Precursor

Identifying novel classes of precatalysts for the oxygen evolution reaction (OER by water oxidation) with enhanced catalytic activity and stability is a key strategy to enable chemical energy conversion. The vast chemical space of intermetallic phases offers plenty of opportunities to discover OER electrocatalysts with improved performance. Herein we report intermetallic nickel germanide (NiGe) acting as a superior activity and durable Ni-based electro(pre)catalyst for OER. It is produced from a molecular bis(germylene)-Ni precursor. The ultra-small NiGe nanocrystals deposited on both nickel foam and fluorinated tin oxide (FTO) electrodes showed lower overpotentials and a durability of over three weeks (505 h) in comparison to the state-of-the-art Ni-, Co-, Fe-, and benchmark NiFe-based electrocatalysts under identical alkaline OER conditions. In contrast to other Ni-based intermetallic precatalysts under alkaline OER conditions, an unexpected electroconversion of NiGe into γ-NiIII OOH with intercalated OH- /CO3 2- transpired that served as a highly active structure as shown by various ex situ methods and quasi in situ Raman spectroscopy.

Selective deposition of metal oxide nanoflakes on graphene electrodes to obtain high-performance asymmetric micro-supercapacitors

To meet the charging market demands of portable microelectronics, there has been a growing interest in high performance and low-cost microscale energy storage devices with excellent flexibility and cycling durability. Herein, interdigitated all-solid-state flexible asymmetric micro-supercapacitors (A-MSCs) were fabricated by a facile pulse current deposition (PCD) approach. Mesoporous Fe2O3 and MnO2 nanoflakes were functionally coated by electrodeposition on inkjet-printed graphene patterns as negative and positive electrodes, respectively. Our PCD approach shows significantly improved adhesion of nanostructured metal oxide with crack-free and homogeneous features, as compared with other reported electrodeposition approaches. The as-fabricated Fe2O3/MnO2 A-MSCs deliver a high volumetric capacitance of 110.6 F cm-3 at 5 μA cm-2 with a broad operation potential range of 1.6 V in neutral LiCl/PVA solid electrolyte. Furthermore, our A-MSC devices show a long cycle life with a high capacitance retention of 95.7% after 10 000 cycles at 100 μA cm-2. Considering its low cost and potential scalability to industrial levels, our PCD technique could be an efficient approach for the fabrication of high-performance MSC devices in the future.

Operando unraveling photothermal-promoted dynamic active-sites generation in NiFe2O4 for markedly enhanced oxygen evolution

The ability to develop highly active and low-cost electrocatalysts represents an important endeavor toward accelerating sluggish water-oxidation kinetics. Herein, we report the implementation and unraveling of the photothermal effect of spinel nanoparticles (NPs) on promoting dynamic active-sites generation to markedly enhance their oxygen evolution reaction (OER) activity via an integrated operando Raman and density functional theory (DFT) study. Specifically, NiFe₂O₄ (NFO) NPs are first synthesized by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors. Upon the near-infrared light irradiation, the photothermal heating of the NFO-based electrode progressively raises the temperature, accompanied by a marked decrease of overpotential. Accordingly, only an overpotential of 309 mV is required to yield a high current density of 100 mA cm^-2, greatly lower than recently reported earth-abundant electrocatalysts. More importantly, the photothermal effect of NFO NPs facilitates surface reconstruction into high-active oxyhydroxides at lower potential (1.36 V) under OER conditions, as revealed by operando Raman spectroelectrochemistry. The DFT calculation corroborates that these reconstructed (Ni,Fe)oxyhydroxides are electrocatalytically active sites as the kinetics barrier is largely reduced over pure NFO without surface reconstruction. Given the diversity of materials (metal oxides, sulfides, phosphides, etc.) possessing the photo-to-thermal conversion, this effect may thus provide a unique and robust platform to boost highly active surface species in nanomaterials for a fundamental understanding of enhanced performance that may underpin future advances in electrocatalysis, photocatalysis, solar-energy conversion, and renewable-energy production.

In situ identification of the electrocatalytic water oxidation behavior of a nickel-based metal-organic framework nanoarray

Metal-organic frameworks (MOFs) have been identified as one of the promising electrocatalysts for the oxygen evolution reaction (OER). However, direct observation of the electrocatalytic behavior of MOF-based electrocatalysts remains extremely challenging, which is of great significance to understand their electrocatalytic mechanism. Herein, we developed a vertically oriented Ni-based MOF nanosheet array doped with 2.09 wt% Ce (denoted as Ce-NiBDC/OG). Ce-NiBDC/OG displayed a low overpotential of 265 mV to deliver a 10 mA cm^-2 current density for the OER. In situ spectroscopy and operando microscopy visualized the phase transformation behavior of Ce-NiBDC/OG to Ce-doped NiOOH induced by electrochemical activation, which was regarded as the real active site. Mechanistic studies revealed that, for the Ce-NiBDC/OG-derived catalyst, the doping of Ce species in NiOOH significantly increased the adsorption of *OH, and further reduced the energy barriers of the rate-determining step (*OH→*O).

Bonding interface boosts the intrinsic activity and durability of NiSe@Fe2O3 heterogeneous electrocatalyst for water oxidation

The intrinsic activity and durability of oxygen evolution reaction (OER) electrocatalysts are mainly dominated by the surface and interface properties of active materials. Herein, a core-shell heterogeneous structure (NF/NiSe@Fe₂O₃) is fabricated via two-step hydrothermal method, which exhibits a low overpotential of 220 mV (or 282 mV) at 10 mA/cm² (or 200 mA/cm²), a small Tafel slope of 36.9 mV/dec, and long-term stability (~230 h) in 1 mol/L KOH for OER. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy reveal the (oxy)hydroxide-rich surface and strong coupling interface between NiSe and Fe₂O₃ via the Fe-Se bond. Density functional theory calculation suggests that the d-band center and electronic state of NiSe@Fe₂O₃ heterojunction are well optimized due to the formation of Fe-Se bond, which is favorable for the enhanced OER activity because of the easy adsorption of oxygen-containing intermediates and desorption of O₂ in the OER process. In addition, the unique core-shell structure and robust bonding interface are responsible for the good stability for OER. This work provides fundamental insights on the bonding effect that determine the performance of OER electrocatalyst.