Bioinspired Supramolecular Lubricating Hydrogel Induced by Shear Force

Bioinspired lubricating materials are great challenge toward artificial joints. In this contribution, we synthesize a bioinspired hydrogel by combining a thixotropic supramolecular network and polymer double network, exhibiting a unique shear-responsive lubricating property. The disassembly of the N-fluorenylmethoxycarbonyl-l-tryptophan supramolecular network triggered by shear force will endow lubricating function to the hydrogel; meanwhile PAAm and PVA double network acts as the supporting skeleton with high mechanical property. This work will bring new insight on the design of artificial lubricating joint.

Multifunctional hybrid graphene oxide for circulating tumor cell isolation and analysis

Even in 21st century, >90% cancer-associated deaths are caused by metastatic disease. Circulating tumor cells (CTCs), which circulate in the blood stream after release from primary tumors, extravasate and form fatal metastases in different organs. Several clinical trials indicate that CTCs can be used as a liquid biopsy of tumors for early diagnosis of cancers. Since CTCs are extremely rare and exhibit heterogeneous biology due to epithelial-mesenchymal transition (EMT), oncologists continue to face enormous challenges in using CTCs as a true "liquid biopsy" for cancer patients. Recent advancements in nanoscience allow us to design nano-architectures with the capability of targeted CTCs isolation and identification. In the current review, we discuss contribution from different groups on the development of graphene oxide based nanoarchitecture for effective isolation and accurate identification of CTCs from whole blood. In the last few years, using zero-dimensional (0D), two dimensional (2D) and three dimensional (3D) multifunctional hybrid graphene oxide (GO), different types of nanoarchitectures have been designed. These nanoarchitectures represent a highly powerful platform for CTC diagnosis. We discuss the major design criteria that have been used to develop hybrid GO nanoarchitectures for selective capture and accurate identification of heterogeneous CTCs from whole blood. At the end, we conclude with the promises, major challenges, and prospect to clinically translate the identification of CTCs using GO based nanotechnology.

A supramolecular pyrenyl glycoside-coated 2D MoS2 composite electrode for selective cell capture

Here we demonstrate the simple construction and characterization of a pyrenyl glycoside-coated 2D MoS₂ material composite capable of selectively capturing proteins and live cells on an electrode, as determined by differential pulse voltammetry.

Electrochemical biosensor for cancer cell detection based on a surface 3D micro-array

The detection of rare circulating tumour cells (CTCs) in patients' blood is crucial for the early diagnosis of cancer, highly precise cancer therapy and monitoring therapeutic outcomes in real time. In this study we have developed an efficient strategy to capture and detect CTCs from the blood of cancer patients using a benzoboric acid modified gold-plated polymeric substrate with a regular 3D surface array. Compared with the smooth substrate, the substrate with the surface 3D microarrays exhibited a higher capture efficiency, i.e. 3.8 times that afforded by the smooth substrate. Additionally, due to the reversible reaction between the benzoboric acid on the 3D microarray and the sialic acid on CTCs, our strategy allowed for easy detachment of the captured CTCs from the substrate without causing critical damage to the cells. This will be of benefit for gaining further access to these rare cells for downstream characterization. The proposed strategy provides several advantages, including enhanced capture efficiency, high sensitivity, low cost and recovery of isolated CTCs, and could become a promising platform for early stage diagnosis of cancer.

Biofunctionalized and self-supported polypyrrole frameworks as nanostructured ECM-like biointerfaces

Hybrid nanobiointerfaces were designed as an original contribution to the challenge of synthesizing nanostructured biomaterials integrating a set of cell fate-determining cues, originally provided to cells by the extracellular matrix (ECM). The produced biointerfaces consist of a stiff framework of intersected polypyrrole (PPy) nanotubes supporting a soft multilayer composed of ECM-derived biomacromolecules: collagen (Col) and hyaluronic acid (HA). PPy frameworks with highly tunable characteristics were synthesized through chemical oxidative polymerization of pyrrole monomers, templated within track-etched polycarbonate (PC) membranes featuring a network of intersected nanopores. PPy interfaces with a porosity of 80%, composed of nanotubes with an average diameter ranging from 40 to 300 nm, intersecting at an angle of 90°, were shown to be self-supported. These rigid PPy nanostructured interfaces were functionalized with a self-assembling (HA/Col) multilayer deposited via a layer-by-layer process. Biofunctionalized and unmodified PPy frameworks were both shown to promote sustained cell adhesion, therefore demonstrating the cytocompatibility of the engineered matrices. Such nanobiointerfaces, combining a mechanically-stable framework of tunable dimensions with a soft biopolymeric multilayer of highly versatile nature, pave the way towards cell-instructive biomaterials able to gather a wide range of cues guiding cell behavior. The developed self-supported structures could be used as a coating or as membranes bridging different tissues.

A versatile template-based approach allows for the synthesis of nanostructured biointerfaces, made of core–shell nanotubes, combining bioactivity and mechanical stability.

Nanotechnology-Based Strategies for Early Cancer Diagnosis Using Circulating Tumor Cells as a Liquid Biopsy

Circulating tumor cells (CTCs) are cancer cells that shed from a primary tumor and circulate in the bloodstream. As a form of “tumor liquid biopsy”, CTCs provide important information for the mechanistic investigation of cancer metastasis and the measurement of tumor genotype evolution during treatment and disease progression. However, the extremely low abundance of CTCs in the peripheral blood and the heterogeneity of CTCs make their isolation and characterization major technological challenges. Recently, nanotechnologies have been developed for sensitive CTC detection; such technologies will enable better cell and molecular characterization and open up a wide range of clinical applications, including early disease detection and evaluation of treatment response and disease progression. In this review, we summarize the nanotechnology-based strategies for CTC isolation, including representative nanomaterials (such as magnetic nanoparticles, gold nanoparticles, silicon nanopillars, nanowires, nanopillars, carbon nanotubes, dendrimers, quantum dots, and graphene oxide) and microfluidic chip technologies that incorporate nanoroughened surfaces and discuss their key challenges and perspectives in CTC downstream analyses, such as protein expression and genetic mutations that may reflect tumor aggressiveness and patient outcome.

Manipulation of the response of human endothelial colony-forming cells by focal adhesion assembly using gradient nanopattern plates

Nanotopography plays a pivotal role in the regulation of cellular responses. Nonetheless, little is known about how the gradient size of nanostructural stimuli alters the responses of endothelial progenitor cells without chemical factors. Herein, the fabrication of gradient nanopattern plates intended to mimic microenvironment nanotopography is described. The gradient nanopattern plates consist of nanopillars of increasing diameter ranges [120-200 nm (GP 120/200), 200-280 nm (GP 200/280), and 280-360 nm (GP 280/360)] that were used to screen the responses of human endothelial colony-forming cells (hECFCs). Nanopillars with a smaller nanopillar diameter caused the cell area and perimeter of hECFCs to decrease and their filopodial outgrowth to increase. The structure of vinculin (a focal adhesion marker in hECFCs) was also modulated by nanostructural stimuli of the gradient nanopattern plates. Moreover, Rho-associated protein kinase (ROCK) gene expression was significantly higher in hECFCs cultured on GP 120/200 than in those on flat plates (no nanopillars), and ROCK suppression impaired the nanostructural-stimuli-induced vinculin assembly. These results suggest that the gradient nanopattern plates generate size-specific nanostructural stimuli suitable for manipulation of the response of hECFCs, in a process dependent on ROCK signaling. This is the first evidence of size-specific nanostructure-sensing behavior of hECFCs.

SIGNIFICANCE

Nano feature surfaces are of growing interest as materials for a controlled response of various cells. In this study, we successfully fabricated gradient nanopattern plates to manipulate the response of blood-derived hECFCs without any chemical stimulation. Interestingly, we find that the sensitive nanopillar size for manipulation of hECFCs is range between 120 nm and 200 nm, which decreased the area and increased the filopodial outgrowth of hECFCs. Furthermore, we only modulate the nanopillar size to increase ROCK expression can be an attractive method for modulating the cytoskeletal integrity and focal adhesion of hECFCs.

Manipulating cell fate: dynamic control of cell behaviors on functional platforms

We review the recent advances and new horizons in the dynamic control of cell behaviors on functional platforms and their applications.

Tunable stiffness of graphene oxide/polyacrylamide composite scaffolds regulates cytoskeleton assembly

Graphene oxide/polyacrylamide composite scaffolds with tunable stiffness are designed and fabricated to investigate the effect of extracellular matrix (ECM) stiffness on cytoskeleton assembly and specific gene expression during cell growth.

The stiffness of the extracellular matrix (ECM) not only provides mechanical resistance to support the cellular shape, but also plays significant roles in many cell functions. However, it's difficult to utilize traditional substrate materials to investigate cell behaviors under physical microenvironments due to their unphysiological stiffness or intrinsic secondary effects. Herein, a stiffness-tunable graphene oxide/polyacrylamide composite scaffold was fabricated to investigate the effect of substrate stiffness on cytoskeleton assembly and specific gene expression during cell growth. In the composite structure, the polyacrylamide (PAAm) hydrogel plays an exceptional role in controlling the substrate stiffness; in contrast, graphene oxide (GO) sheets not only provide permissive surfaces for cell adhesion and growth, but also effectively eliminate the secondary effects of the PAAm hydrogel. It's found that substrate stiffness could affect cell morphology and cytoskeleton assembly via specific genetic pathways. Therefore, the composite structure can be considered an attractive candidate as a scaffold and provides potential to elucidate the disease association of ECMs.

Tuning the interactions between chiral plasmonic films and living cells

Designing chiral materials to manipulate the biological activities of cells has been an important area not only in chemistry and material science, but also in cell biology and biomedicine. Here, we introduce monolayer plasmonic chiral Au nanoparticle (NP) films modified with L- or D-penicillamine (Pen) to be developed for cell growth, differentiation, and retrieval. The monolayer films display high chiroptical activity, with circular dichroism values of 3.5 mdeg at 550 nm and 26.8 mdeg at 775 nm. The L-Pen-NP films accelerate cell proliferation, whereas the D -Pen-NP films have the opposite effect. Remote irradiation with light is chosen to noninvasively collect the cells. The results demonstrate that left circularly polarized light improves the efficiency of cell detachment up to 91.2% for L-Pen-NP films. These findings will facilitate the development of cell culture in biomedical application and help to understand natural homochirality.

Water and Blood Repellent Flexible Tubes

A top-down scalable method to produce flexible water and blood repellent tubes is introduced. The method is based on replication of overhanging nanostructures from an aluminum tube template to polydimethylsiloxane (PDMS) via atomic layer deposition (ALD) assisted sacrificial etching. The nanostructured PDMS/titania tubes are superhydrophobic with water contact angles 163 ± 1° (advancing) and 157 ± 1° (receding) without any further coating. Droplets are able to slide through a 4 mm (inner diameter) tube with low sliding angles of less than 10° for a 35 µL droplet. The superhydrophobic tube shows up to 5,000 times increase in acceleration of a sliding droplet compared to a control tube depending on the inclination angle. Compared to a free falling droplet, the superhydrophobic tube reduced the acceleration by only 38.55%, as compared to a 99.99% reduction for a control tube. The superhydrophobic tubes are blood repellent. Blood droplets (35 µL) roll through the tubes at 15° sliding angles without leaving a bloodstain. The tube surface is resistant to adhesion of activated platelets unlike planar control titania and smooth PDMS surfaces.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Light-Responsive Janus-Particle-Based Coatings for Cell Capture and Release

A robust light-responsive coating based on Janus composite particles is achieved. First, strawberry-like silica Janus particles are synthesized by the sol-gel process at a patchy emulsion interface. One side of the silica Janus particles possesses nanoscale roughness, and the other side is flat. Then, spiropyran-containing polymer brushes are grafted onto the coarse hemispherical side of the as-synthesized Janus particles, and the other flat side is modified with imidazoline groups. The light-responsive polymer brush-terminated coarse hemispherical sides direct toward the air when the Janus composite particles self-organize into a layer on the surface of epoxy resin substrate. The imidazoline groups react with the epoxy groups in the epoxy resin to form a robust smart coating. The coating can be reversibly triggered between hydrophobic and hydrophilic by UV and visible-light irradiation, which is attributed to the isomerization of spiropyran moieties. When the hydrophobic ring-closed spiropyran form is prominent, HeLa cells can be effectively captured onto the coating. After UV light irradiation, the ring-closed spiropyran form changes to the hydrophilic ring-opened zwitterionic merocyanine form, and then the captured cells are released. This work shows promising potential for engineering advanced smart biointerfaces.

Highly Efficient Capture and Electrochemical Release of Circulating Tumor Cells by Using Aptamers Modified Gold Nanowire Arrays

The effective capture and release of circulating tumor cells (CTCs) is of significant importance in cancer prognose and treatment. Here we report a highly efficient method to capture and release human leukemic lymphoblasts (CCRF-CEM) using aptamers modified gold nanowire arrays (AuNWs). The gold nanowires, showing tunable morphologies from relatively random pillar deposit to relatively uniform arrays, were fabricated by electrochemical deposition using anodic aluminum oxide (AAO) as template. Upon simply being modified with aptamers by Au-S chemistry, the AuNWs exhibit higher specificity to target cells. Also compared to flat gold substrate, the AuNWs with nanostructure can capture target cells with much higher capture yield. Moreover, the captured CCRF-CEM cells can be released from AuNWs efficiently with little damage through an electrochemical desorption process. We predict that our strategy has great potential in providing a simple and economical platform for CTCs isolation, cancer diagnosis, and therapy.

One-Dimensional Hydroxyapatite Nanostructures with Tunable Length for Efficient Stem Cell Differentiation Regulation

It is well-accepted that most osteogenic differentiation processes do need growth factors assistance to improve efficiency. As a material cue, hydroxyapatite (HAp) can promote osteogenic differentiation of stem cells only in a way. Up to now, rare work related to the relationship between HAp nanostructures and stem cells in osteogenic differentiation process without the assistance of growth factors has been reported. In this study, one-dimensional (1D) HAp nanostructures with tunable length were synthesized by an oleic acid assisted solvothermal method by adjusting the alcohol/water ratio (η). The morphology of 1D HAp nanostructures can be changed from long nanowires into nanorods with the η value change. Different substrates constructed by 1D HAp nanostructures were prepared to investigate the effect of morphology of nanostructured HAp on stem cell fate without any growth factors or differentiation induce media. Human adipose-derived stem cells (hADSCs), a kind of promising stem cell for autologous stem cell tissue engineering, were used as the stem cell model. The experiments prove that HAp morphology can determine the performance of hADSCs cultured on different substrates. Substrate constructed by HAp nanorods (100 nm) is of little benefit to osteogenic differentiations. Substrate constructed on HAp long nanowires (50 μm) causes growth and spread inhibition of hADSCs, which even causes most cells death after 7 days of culture. However, substrate constructed by HAp short nanowires (5 μm) can destine the hADSCs differentiation to osteoblasts efficiently in normal medium (after 3 weeks) without any growth factors. It is surprise that hADSCs have changed to polyhedral morphology and exhibited the tendency to osteogenic differentiation after only 24 h culture. Hydroxyapatite nanostructures mediated stem cell osteogenic differentiation excluding growth factors provides a powerful cue to design biomaterials with special nanostructures, and helps to elucidate the interaction of stem cell and biomaterials nanostructures. The results from this study are promising for application in bone tissue engineering.

Facile modulation of cell adhesion to a poly(ethylene glycol) diacrylate film with incorporation of polystyrene nano-spheres

Poly(ethylene glycol) diacrylate (PEGDA) is a common hydrogel that has been actively investigated for various tissue engineering applications owing to its biocompatibility and excellent mechanical properties. However, the native PEGDA films are known for their bio-inertness which can hinder cell adhesion, thereby limiting their applications in tissue engineering and biomedicine. Recently, nano composite technology has become a particularly hot topic, and has led to the development of new methods for delivering desired properties to nanomaterials. In this study, we added polystyrene nano-spheres (PS) into a PEGDA solution to synthesize a nano-composite film and evaluated its characteristics. The experimental results showed that addition of the nanospheres to the PEGDA film not only resulted in modification of the mechanical properties and surface morphology but further improved the adhesion of cells on the film. The tensile modulus showed clear dependence on the addition of PS, which enhanced the mechanical properties of the PEGDA-PS film. We attribute the high stiffness of the hybrid hydrogel to the formation of additional cross-links between polymeric chains and the nano-sphere surface in the network. The effect of PS on cell adhesion and proliferation was evaluated in L929 mouse fibroblast cells that were seeded on the surface of various PEGDA-PS films. Cells density increased with a larger PS concentration, and the cells displayed a spreading morphology on the hybrid films, which promoted cell proliferation. Impressively, cellular stiffness could also be modulated simply by tuning the concentration of nano-spheres. Our results indicate that the addition of PS can effectively tailor the physical and biological properties of PEGDA as well as the mechanical properties of cells, with benefits for biomedical and biotechnological applications.

DNA Hydrogel with Aptamer-Toehold-Based Recognition, Cloaking, and Decloaking of Circulating Tumor Cells for Live Cell Analysis

Circulating tumor cells (CTCs) contain molecular information on the primary tumor and can be used for predictive cancer diagnostics. Capturing rare live CTCs and their quantification in whole blood remain technically challenging. Here we report an aptamer-trigger clamped hybridization chain reaction (atcHCR) method for in situ identification and subsequent cloaking/decloaking of CTCs by porous DNA hydrogels. These decloaked CTCs were then used for live cell analysis. In our design, a DNA staple strand with aptamer-toehold biblocks specifically recognizes epithelial cell adhesion molecule (EpCAM) on the CTC surface that triggers subsequent atcHCR via toehold-initiated branch migration. Porous DNA hydrogel based-cloaking of single/cluster of CTCs allows capturing of living CTCs directly with minimal cell damage. The ability to identify a low number of CTCs in whole blood by DNA hydrogel cloaking would allow high sensitivity and specificity for diagnosis in clinically relevant settings. More significantly, decloaking of CTCs using controlled and defined chemical stimuli can release living CTCs without damages for subsequent culture and live cell analysis. We expect this liquid biopsy tool to open new powerful and effective routes for cancer diagnostics and therapeutics.

Three-Dimensional Inverse Opal Photonic Crystal Substrates toward Efficient Capture of Circulating Tumor Cells

Artificial fractal structures have attracted considerable scientific interest in circulating tumor cells (CTCs) detection and capture, which plays a pivotal role in the diagnosis and prognosis of cancer. Herein, we designed a bionic TiO₂ inverse opal photonic crystal (IOPC) structure for highly efficient immunocapture of CTCs by combination of a magnetic Fe₃O₄@C6@silane nanoparticles with anti-EpCAM (antiepithelial cell adhesion molecule) and microchannel structure. Porous structure and dimension of IOPC TiO₂ can be precisely controlled for mimicking cellular components, and anti-EpCAM antibody was further modified on IOPC interface by conjugating with polydopamine (PDA). The improvement of CTCs capture efficiency reaches a surprising factor of 20 for the IOPC interface compared to that on flat glass, suggesting that the IOPCs are responsible for the dramatic enhancement of the capture efficiency of MCF-7 cells. IOPC substrate with pore size of 415 nm leads to the optimal CTCs capture efficiency of 92% with 1 mL/h. Besides the cell affinity, IOPCs also have the advantage of light scattering property which can enhance the excitation and emission light of fluorescence labels, facilitating the real-time monitoring of CTCs capture. The IOPC-based platform demonstrates excellent performance in CTCs capture, which will take an important step toward specific recognition of disease-related rare cells.

3D Printed, Microgroove Pattern-Driven Generation of Oriented Ligamentous Architectures

Specific orientations of regenerated ligaments are crucially required for mechanoresponsive properties and various biomechanical adaptations, which are the key interplay to support mineralized tissues. Although various 2D platforms or 3D printing systems can guide cellular activities or aligned organizations, it remains a challenge to develop ligament-guided, 3D architectures with the angular controllability for parallel, oblique or perpendicular orientations of cells required for biomechanical support of organs. Here, we show the use of scaffold design by additive manufacturing for specific topographies or angulated microgroove patterns to control cell orientations such as parallel (0°), oblique (45°) and perpendicular (90°) angulations. These results demonstrate that ligament cells displayed highly predictable and controllable orientations along microgroove patterns on 3D biopolymeric scaffolds. Our findings demonstrate that 3D printed topographical approaches can regulate spatiotemporal cell organizations that offer strong potential for adaptation to complex tissue defects to regenerate ligament-bone complexes.

Smart Biointerface with Photoswitched Functions between Bactericidal Activity and Bacteria-Releasing Ability

Smart biointerfaces with capability to regulate cell-surface interactions in response to external stimuli are of great interest for both fundamental research and practical applications. Smart surfaces with "ON/OFF" switchability for a single function such as cell attachment/detachment are well-known and useful, but the ability to switch between two different functions may be seen as the next level of "smart". In this work reported, a smart supramolecular surface capable of switching functions reversibly between bactericidal activity and bacteria-releasing ability in response to UV-visible light is developed. This platform is composed of surface-containing azobenzene (Azo) groups and a biocidal β-cyclodextrin derivative conjugated with seven quaternary ammonium salt groups (CD-QAS). The surface-immobilized Azo groups in trans form can specially incorporate CD-QAS to achieve a strongly bactericidal surface that kill more than 90% attached bacteria. On irradiation with UV light, the Azo groups switch to cis form, resulting in the dissociation of the Azo/CD-QAS inclusion complex and release of dead bacteria from the surface. After the kill-and-release cycle, the surface can be easily regenerated for reuse by irradiation with visible light and reincorporation of fresh CD-QAS. The use of supramolecular chemistry represents a promising approach to the realization of smart, multifunctional surfaces, and has the potential to be applied to diverse materials and devices in the biomedical field.

Programmable Nano-Bio Interfaces for Functional Biointegrated Devices

A large amount of evidence has demonstrated the revolutionary role of nanosystems in the screening and shielding of biological systems. The explosive development of interfacing bioentities with programmable nanomaterials has conveyed the intriguing concept of nano-bio interfaces. Here, recent advances in functional biointegrated devices through the precise programming of nano-bio interactions are outlined, especially with regard to the rational assembly of constituent nanomaterials on multiple dimension scales (e.g., nanoparticles, nanowires, layered nanomaterials, and 3D-architectured nanomaterials), in order to leverage their respective intrinsic merits for different functions. Emerging nanotechnological strategies at nano-bio interfaces are also highlighted, such as multimodal diagnosis or "theragnostics", synergistic and sequential therapeutics delivery, and stretchable and flexible nanoelectronic devices, and their implementation into a broad range of biointegrated devices (e.g., implantable, minimally invasive, and wearable devices). When utilized as functional modules of biointegrated devices, these programmable nano-bio interfaces will open up a new chapter for precision nanomedicine.

Directing Stem Cell Differentiation via Electrochemical Reversible Switching between Nanotubes and Nanotips of Polypyrrole Array

Control of stem cell behaviors at solid biointerfaces is critical for stem-cell-based regeneration and generally achieved by engineering chemical composition, topography, and stiffness. However, the influence of dynamic stimuli at the nanoscale from solid biointerfaces on stem cell fate remains unclear. Herein, we show that electrochemical switching of a polypyrrole (Ppy) array between nanotubes and nanotips can alter surface adhesion, which can strongly influence mechanotransduction activation and guide differentiation of mesenchymal stem cells (MSCs). The Ppy array, prepared via template-free electrochemical polymerization, can be reversibly switched between highly adhesive hydrophobic nanotubes and poorly adhesive hydrophilic nanotips through an electrochemical oxidation/reduction process, resulting in dynamic attachment and detachment to MSCs at the nanoscale. Multicyclic attachment/detachment of the Ppy array to MSCs can activate intracellular mechanotransduction and osteogenic differentiation independent of surface stiffness and chemical induction. This smart surface, permitting transduction of nanoscaled dynamic physical inputs into biological outputs, provides an alternative to classical cell culture substrates for regulating stem cell fate commitment. This study represents a general strategy to explore nanoscaled interactions between stem cells and stimuli-responsive surfaces.

Bio-inspired self-healing structural color hydrogel

Biologically inspired self-healing structural color hydrogels were developed by adding a glucose oxidase (GOX)- and catalase (CAT)-filled glutaraldehyde cross-linked BSA hydrogel into methacrylated gelatin (GelMA) inverse opal scaffolds. The composite hydrogel materials with the polymerized GelMA scaffold could maintain the stability of an inverse opal structure and its resultant structural colors, whereas the protein hydrogel filler could impart self-healing capability through the reversible covalent attachment of glutaraldehyde to lysine residues of BSA and enzyme additives. A series of unprecedented structural color materials could be created by assembling and healing the elements of the composite hydrogel. In addition, as both the GelMA and the protein hydrogels were derived from organisms, the composite materials presented high biocompatibility and plasticity. These features of self-healing structural color hydrogels make them excellent functional materials for different applications.

A Nanostructured Microfluidic Immunoassay Platform for Highly Sensitive Infectious Pathogen Detection

Rapid and simultaneous detection of multiple potential pathogens by portable devices can facilitate early diagnosis of infectious diseases, and allow for rapid and effective implementation of disease prevention and treatment measures. The development of a ZnO nanorod integrated microdevice as a multiplex immunofluorescence platform for highly sensitive and selective detection of avian influenza virus (AIV) is described. The 3D morphology and unique optical property of the ZnO nanorods boost the detection limit of the H5N2 AIV to as low as 3.6 × 103 EID50 mL-1 (EID50 : 50% embryo infectious dose), which is ≈22 times more sensitive than conventional enzyme-linked immunosorbent assay. The entire virus capture and detection process could be completed within 1.5 h with excellent selectivity. Moreover, this microfluidic biosensor is capable of detecting multiple viruses simultaneously by spatial encoding of capture antibodies. One prominent feature of the device is that the captured H5N2 AIV can be released by simply dissolving ZnO nanorods under slightly acidic environment for subsequent off-chip analyses. As a whole, this platform provides a powerful tool for rapid detection of multiple pathogens, which may extent to the other fields for low-cost and convenient biomarker detection.

Flexible Gold Nanocone Array Surfaces as a Tool for Regulating Neuronal Behavior

Accelerated neurite outgrowth of rat cortical neurons on a flexible and inexpensive substrate functionalized with gold nanocone arrays is reported. The gold nanocone arrays are fabricated on Teflon films by a bottom-up approach based on colloidal lithography followed by deposition of a thin gold layer. The geometry of nanocone arrays including height and pitch is controlled by the overall etching time and template polystyrene beads size. Fluorescence microscopy studies reveal high viability and significant morphological changes of the neurons on the structured surfaces. The elongation degree of neurite is maximized on the nanocone arrays created with 1 µm polystyrene beads by a factor of two with respect to the control. Furthermore, the interface between the neurons and the nanocones is investigated by scanning electron microscopy and focused ion beam cross-sectioning. The detailed observation of the neuron/nanocone interfaces reveals the morphological similarity between the nanocone tips and the neuronal processes, the existence of interspace at the interface between the cell body and the nanocones, and neurite bridging among the neighboring structures, which may induce the acceleration of neurite outgrowth. The flexible gold nanocone arrays can be a good supporting substrate of neuron culture with noble electrical and optical properties.

Fabrication of micropatterns on polypropylene films via plasma pretreatment combined with UV-initiated graft polymerization

In this study, micropatterns on polypropylene films were fabricated via plasma pretreatment and UV-initiated graft polymerization. Firstly, radio-frequency plasma, which does not significantly influence bulk attributes of substrates due to limited penetration depth, was utilized to activate polypropylene films. Then, different sizes of micropatterns of poly(hydroxyethyl methacrylate) (PHEMA) were fabricated on the polypropylene films via UV-initiated graft polymerization of hydroxyethyl methacrylate by using photo-masks. Scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and contact angle (CA) were employed to characterize changes of pristine polypropylene films and modified ones in surface morphology, roughness, hydrophilicity, free energy and the surface chemical composition. All of these confirmed the successful grafting of different sizes of PHEMA micropatterns on the polypropylene surface. Furthermore, the influence of PHEMA micropatterns on cell proliferation and cytotoxicity was evaluated in vitro. Analysis of cell behaviour indicated that PHEMA micropatterns of the appropriate size can promote cellular adhesion and proliferation, and the PHEMA-micropatterned polypropylene films had good biocompatibility. The approach presented here provides an alternative to synthesize on the surface of polypropylene films' micropatterns with the aim of using them in a diverse array of applications.

Mapping cell behavior across a wide range of vertical silicon nanocolumn densities

Over the past decade, vertical nanostructures have provided novel approaches for biomedical applications such as intracellular delivery/detection, specific cell capture, membrane potential measurement, and cellular activity regulation. Although the feasibility of the vertical nanostructures as a new biological tool has been thoroughly demonstrated, a better understanding of cell behavior on vertical nanostructures, in particular the effects of geometry, is essential for advanced applications. To investigate the cell behavior according to the variation of the spacing between vertical nanostructures, we have interfaced fibroblasts (NIH3T3) with density-controlled vertical silicon nanocolumn arrays (vSNAs). Over a wide range of vSNA densities, we observe three distinct cell settling regimes and investigate both overall cell behavior (adhesions, morphology, and mobility) and detailed biomacromolecule variance (F-actin and focal adhesion) across these regimes. We expect that these systematic observations could serve as a guide for improved nanostructure array design for the desired cell manipulation.

Tissue-engineered cartilage constructed by a biotin-conjugated anti-CD44 avidin binding technique for the repairing of cartilage defects in the weight-bearing area of knee joints in pigs

OBJECTIVES

The lack of effective treatment for cartilage defects has prompted investigations using tissue engineering techniques for their regeneration and repair. The success of tissue-engineered repair of cartilage may depend on the rapid and efficient adhesion of transplanted cells to a scaffold. Our aim in this study was to repair full-thickness defects in articular cartilage in the weight-bearing area of a porcine model, and to investigate whether the CD44 monoclonal antibody biotin-avidin (CBA) binding technique could provide satisfactory tissue-engineered cartilage.

METHODS

Cartilage defects were created in the load-bearing region of the lateral femoral condyle of mini-type pigs. The defects were repaired with traditional tissue-engineered cartilage, tissue-engineered cartilage constructed with the biotin-avidin (BA) technique, tissue-engineered cartilage constructed with the CBA technique and with autologous cartilage. The biomechanical properties, Western blot assay, histological findings and immunohistochemical staining were explored.

RESULTS

The CBA group showed similar results to the autologous group in biomechanical properties, Moran's criteria, histological tests and Wakitani histological scoring.

CONCLUSIONS

These results suggest that tissue-engineered cartilage constructed using the CBA technique could be used effectively to repair cartilage defects in the weight-bearing area of joints.Cite this article: H. Lin, J. Zhou, L. Cao, H. R. Wang, J. Dong, Z. R. Chen. Tissue-engineered cartilage constructed by a biotin-conjugated anti-CD44 avidin binding technique for the repairing of cartilage defects in the weight-bearing area of knee joints in pigs. Bone Joint Res 2017;6:-295. DOI: 10.1302/2046-3758.65.BJR-2016-0277.

Underwater Transparent Miniature "Mechanical Hand" Based on Femtosecond Laser-Induced Controllable Oil-Adhesive Patterned Glass for Oil Droplet Manipulation

Development of underwater superoleophobic surfaces has captured the imagination of researchers because of their applications; especially, oil manipulation based on such surfaces has attracted much attention. Here, we show a simple and effective way to fabricate an underwater transparent miniature "mechanical hand" based on controllable oil-adhesive patterned glass using a femtosecond laser. The underwater oil-adhesive force of the patterned glasses that compose the "mechanical hand" device can be controlled from ultralow to ultrahigh by adjusting the ratio of the untreated flat glass area to the laser-ablated rough area. These surfaces also showed favorable transparency in water. Various oils such as chloroform, hexadecane, n-dodecane, decane, liquid paraffin, and petroleum ether were tested, and their repellency against the as-prepared surfaces in water medium was confirmed. Moreover, the "mechanical hand" was used to implement oil transportation, fusion, and rapid capture, which can be applied in the construction of microfluidic devices, in situ detectors, and bioreactors.

Efficient Capture of Cancer Cells by Their Replicated Surfaces Reveals Multiscale Topographic Interactions Coupled with Molecular Recognition

Cell-surface topographic interactions can direct the design of biointerfaces, which have been widely used in isolation of circulating tumor cells or fundamental cell biological research. By using three kinds of cancer cell-replicated surfaces with differentiated structures, we uncover that multiscale-cooperative topographic interactions (at both nanoscale and microscale) coupled with molecular recognition enable efficient and specific isolation of cancer cells. The cell replicas precisely inherit the structural features from the original cancer cells, providing not only preferable structures for matching with cancer cells but also a unique platform to interrogate whether certain cancer cells can optimally match with their own replicated surfaces. The results reveal that cancer cells do not show preferential recognitions to their respective replicas, while the capture agent-modified surfaces with hierarchical structures exhibit improved cancer cell capture efficiencies. Two levels of topographic interactions between cancer cells and cell replica surfaces exist. Nanoscale filopodia on cancer cells can topographically interact with different nanostructures on replica surfaces. In addition, microscale concave/convex on surfaces provide suitable sites for trapping cancer cells. This study may promote smart design of multiscale biofunctional materials that can specifically recognize cancer cells.

Bioinspired Hierarchically Structured Surfaces for Efficient Capture and Release of Circulating Tumor Cells

The development of novel bioinspired surfaces with hierarchical micro- and nanoscale topographic structures for efficient capture and release of circulating tumor cells (CTCs) is reported. The capture of CTCs, facilitated by surface-immobilized epithelial cell adhesion molecule antibodies (anti-EpCAM), was shown to be significantly enhanced in novel three-dimensional hierarchically structured surfaces that were fabricated by replicating the natural micro- and nanostructures of rose petals. Under static conditions, these hierarchical capture substrates exhibited up to 6 times higher cell capture ability at concentrations of 100 cells mL^-1 in contrast to flat anti-EpCAM-functionalized polydimethylsiloxane (PDMS) surfaces. As indicated by scanning electron microscopy (SEM) and immunofluorescent images, this enhancement can be in large part attributed to the topographical interaction between nanoscale cell surface components and nanostructures on the substrate. Similarly, the increased surface area affords a higher nominal coverage of anti-EpCAM, which increases the number of available binding sites for cell capture. By treating the substrates with the biocompatible reductant glutathione (GSH), up to 85% of the captured cells were released, which displayed over 98% cell viability after culturing on tissue culture polystyrene (TCP) for 24 h. Therefore, these bioinspired hierarchically structured and functionalized substrates can be successfully applied to capture CTCs, as well as release CTCs for subsequent analysis. These findings provide new prospects for designing cell-material interfaces for advanced cell-based biomedical studies in the future.

Graphene oxide nanolayers as nanoparticle anchors on biomaterial surfaces with nanostructures and charge balance for bone regeneration

Graphene oxide (GO) is a carbon-based nanomaterial with high surface area and abundant functional groups, providing various sites for binding and immobilization of growth factor vehicles. This study used GO nanolayer as an anchor for the immobilization of bone morphogenetic protein-2 (BMP-2)-encapsulated bovine serum albumin nanoparticles (NPs) on the hydroxyapatite (HA) and tricalcium phosphate (TCP) scaffolds by electrostatic interaction between the positive charges of the NPs and negative charges of GO. GO nanolayers prevented the rapid degradation of TCP scaffolds. Moreover, GO nanolayers promoted NP adsorption on these scaffolds, and realized BMP-2 sustained release. NPs endowed the scaffold surfaces with a nanostructure similar to that of the extracellular matrix (ECM), improving bone marrow stromal cell (BMSC) attachment. Furthermore, the positive charged NPs and negative charged GO nanolayers constructed a charge-balanced surface on the scaffolds, enhancing BMSC proliferation. The nanostructure, charge balance and BMP-2 sustained release capability synergistically improved BMSC differentiation and bone regeneration. In summary, GO is a potential candidate to modify biomaterial surfaces as an anchor for efficient immobilization of growth factor vehicles. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1311-1323, 2017.

Circulating Tumor Cells: From Theory to Nanotechnology-Based Detection

Cancer stem cells with stem-cell properties are regarded as tumor initiating cells. Sharing stem-cell properties, circulating tumor cells (CTCs) are responsible for the development of metastasis, which significant affects CTC analysis in clinical practice. Due to their extremely low occurrence in blood, however, it is challenging to enumerate and analyze CTCs. Nanotechnology is able to address the problems of insufficient capture efficiency and low purity of CTCs owing to the unique structural and functional properties of nanomaterials, showing strong promise for CTC isolation and detection. In this review, we discuss the role of stem-like CTCs in metastases, provide insight into recent progress in CTC isolation and detection approaches using various nanoplatforms, and highlight the role of nanotechnology in the advancement of CTC research.

Label-Free Virus Capture and Release by a Microfluidic Device Integrated with Porous Silicon Nanowire Forest

Viral diseases are perpetual threats to human and animal health. Detection and characterization of viral pathogens require accurate, sensitive, and rapid diagnostic assays. For field and clinical samples, the sample preparation procedures limit the ultimate performance and utility of the overall virus diagnostic protocols. This study presents the development of a microfluidic device embedded with porous silicon nanowire (pSiNW) forest for label-free size-based point-of-care virus capture in a continuous curved flow design. The pSiNW forests with specific interwire spacing are synthesized in situ on both bottom and sidewalls of the microchannels in a batch process. With the enhancement effect of Dean flow, this study demonstrates that about 50% H5N2 avian influenza viruses are physically trapped without device clogging. A unique feature of the device is that captured viruses can be released by inducing self-degradation of the pSiNWs in physiological aqueous environment. About 60% of captured viruses can be released within 24 h for virus culture, subsequent molecular diagnosis, and other virus characterization and analyses. This device performs viable, unbiased, and label-free virus isolation and release. It has great potentials for virus discovery, virus isolation and culture, functional studies of virus pathogenicity, transmission, drug screening, and vaccine development.

Recent progress on the development of anisotropic gold nanoparticles: Design strategies and growth mechanism

This review summarizes recent advances on design strategies for shape-controlled anisotropic gold nanoparticles. Detailed chemical mechanism has been discussed to understand the anisotropic growth. The effect of various chemical parameters and surface facets for the formation of different shaped anisotropic nanoparticles have been addressed.

Hierarchical macropore/nano surface regulates stem cell fate through a ROCK-related signaling pathway

Synergistic cytoskeleton distribution accompanying higher ROCK activity activated FAK-ERK1/2 signaling pathway and promotion of BMSC osteogenesis on hierarchical surface.

A reusable supramolecular platform for the specific capture and release of proteins and bacteria

A re-usable supramolecular platform with the capability of high-efficiency capture and on-demand release of specific proteins and bacteria was developed.

Inflammation-sensitive in situ smart scaffolding for regenerative medicine

To cope with the rapid evolution of the tissue engineering field, it is now essential to incorporate the use of on-site responsive scaffolds. Therefore, it is of utmost importance to find new 'Intelligent' biomaterials that can respond to the physicochemical changes in the microenvironment. In this present report, we have developed biocompatible stimuli responsive polyaniline-multiwalled carbon nanotube/poly(N-isopropylacrylamide), (PANI-MWCNT/PNIPAm) composite nanofiber networks and demonstrated the physiological temperature coordinated cell grafting phenomenon on its surface. The composite nanofibers were prepared by a two-step process initiated with an assisted in situ polymerization followed by electrospinning. To obtain a smooth surface in individual nanofibers with the thinnest diameter, the component ratios and electrospinning conditions were optimized. The temperature-gated rearrangements of the molecular structure are characterized by FTIR spectroscopy with simultaneous macromolecular architecture changes reflected on the surface morphology, average diameter and pore size as determined by scanning electron microscopy. The stimuli responsiveness of the nanofibers has first been optimized with computational modeling of temperature sensitive components (coil-like and globular conformations) to tune the mechanism for temperature dependent interaction during in situ scaffolding with the cell membrane. The nanofiber networks show excellent biocompatibility, tested with fibroblasts and also show excellent sensitivity to inflammation to combat loco-regional acidosis that delay the wound healing process by an in vitro model that has been developed for testing the proposed responsiveness of the composite nanofiber networks. Cellular adhesion and detachment are regulated through physiological temperature and show normal proliferation of the grafted cells on the composite nanofibers. Thus, we report for the first time, the development of physiological temperature gated inflammation-sensitive smart biomaterials for advanced tissue regeneration and regenerative medicine.

Smart Thin Hydrogel Coatings Harnessing Hydrophobicity and Topography to Capture and Release Cancer Cells

Smart thin hydrogel coatings are fabricated to capture and release targeted cancer cells by simultaneously tuning surface hydrophobicity and topography. At physiological temperature, the targeted cancer cells are captured on the hydrophobic and wrinkled coating surface. At room temperature, the captured cells are released from the hydrophilic and smooth coating surface.

Chitosan Nanofibers for Specific Capture and Nondestructive Release of CTCs Assisted by pCBMA Brushes

Over the last decade, significant progress has been made to develop sensitive devices for the capture of circulating tumor cells (CTCs) from blood of cancer patients. However, simple capture and counting of CTCs cannot provide effective information for understanding the biology of them. In this work, a functional biointerface is fabricated for specific capture and nondestructive release of CTCs from blood samples. A nanostrucure of porous network based on chitosan nanofibers is fabricated by electrospinning, to mimic the function of extracellular matrices, and then the poly(carboxybetaine methacrylate) (pCBMA) brushes integrating onto nanofiber interface provide the effect of interfacial properties to control nonspecific cell adhesion and the multivalent immobilization of aptamers to induce high efficient and specific CTC capture. Furthermore, a complementary sequence is used to efficiently hybridize with the aptamer to achieve nondestructive release of the captured target cells, assisted by the flexible space provided by pCBMA brushes. This work also shows how nanostructure and the interface molecules regulate the morphology of the captured CTCs, and reveals the importance of the controllable cell morphology on biointerface for an effective nondestructive release of the captured CTCs.

High Density of Aligned Nanowire Treated with Polydopamine for Efficient Gene Silencing by siRNA According to Cell Membrane Perturbation

High aspect ratio nanomaterials, such as vertically aligned silicon nanowire (SiNW) substrates, are three-dimensional topological features for cell manipulations. A high density of SiNWs significantly affects not only cell adhesion and proliferation but also the delivery of biomolecules to cells. Here, we used polydopamine (PD) that simply formed a thin coating on various material surfaces by the action of dopamine as a bioinspired approach. The PD coating not only enhanced cell adhesion, spreading, and growth but also anchored more siRNA by adsorption and provided more surface concentration for substrate-mediated delivery. By comparing plain and SiNW surfaces with the same amount of loaded siRNA, we quantitatively found that PD coating efficiently anchored siRNA on the surface, which knocked down the expression of a specific gene by RNA interference. It was also found that the interaction of SiNWs with the cell membrane perturbed the lateral diffusion of lipids in the membrane by fluorescence recovery after photobleaching. The perturbation was considered to induce the effective delivery of siRNA into cells and allow the cells to carry out their biological functions. These results suggest promising applications of PD-coated, high-density SiNWs as simple, fast, and versatile platforms for transmembrane delivery of biomolecules.

Tubular inverse opal scaffolds for biomimetic vessels

There is a clinical need for tissue-engineered blood vessels that can be used to replace or bypass damaged arteries. The success of such grafts depends strongly on their ability to mimic native arteries; however, currently available artificial vessels are restricted by their complex processing, controversial integrity, or uncontrollable cell location and orientation. Here, we present new tubular scaffolds with specific surface microstructures for structural vessel mimicry. The tubular scaffolds are fabricated by rotationally expanding three-dimensional tubular inverse opals that are replicated from colloidal crystal templates in capillaries. Because of the ordered porous structure of the inverse opals, the expanded tubular scaffolds are imparted with circumferentially oriented elliptical pattern microstructures on their surfaces. It is demonstrated that these tailored tubular scaffolds can effectively make endothelial cells to form an integrated hollow tubular structure on their inner surface and induce smooth muscle cells to form a circumferential orientation on their outer surface. These features of our tubular scaffolds make them highly promising for the construction of biomimetic blood vessels.

Amplified effect of surface charge on cell adhesion by nanostructures

Nano-biointerfaces with varied surface charge can be readily fabricated by integrating a template-based process with maleimide-thiol coupling chemistry. Significantly, nanostructures are employed for amplifying the effect of surface charge on cell adhesion, as revealed by the cell-adhesion performance, cell morphology and corresponding cytoskeletal organization. This study may provide a promising strategy for developing new biomedical materials with tailored cell adhesion for tissue implantation and regeneration.

Subsurface Super-resolution Imaging of Unstained Polymer Nanostructures

Optical imaging has offered unique advantages in material researches, such as spectroscopy and lifetime measurements of deeply embedded materials, which cannot be matched using electron or scanning-probe microscopy. Unfortunately, conventional optical imaging cannot provide the spatial resolutions necessary for many nanoscopic studies. Despite recent rapid progress, super-resolution optical imaging has yet to be widely applied to non-biological materials. Herein we describe a method for nanoscopic optical imaging of buried polymer nanostructures without the need for extrinsic staining. We observed intrinsic stochastic fluorescence emission or blinking from unstained polymers and performed spatial-temporal spectral analysis to investigate its origin. We further applied photon localization super-resolution imaging reconstruction to the detected stochastic blinking, and achieved a spatial resolution of at least 100 nm, which corresponds to a six-fold increase over the optical diffraction limit. This work demonstrates the potential for studying the static heterogeneities of intrinsic polymer molecular-specific properties at sub-diffraction-limited optical resolutions.