Bacteriocin AS-48, a microbial cyclic polypeptide structurally and functionally related to mammalian NK-lysin

Crystal structure and functional studies reveal that PAS factor from Vibrio vulnificus is a novel member of the saposin-fold family

PAS factor is a novel putative bacterial secretion factor thought to induce secretion of periplasmic proteins. We solved the crystal structure of PAS factor from Vibrio vulnificus at 1.8A resolution and found it to be comprised of five alpha helices that form an antiparallel bundle with an up-and-down topology, and to adopt the saposin-fold characteristic of a family of proteins that bind to membranes and lipids. PAS factor lacks the disulfide bridge characteristic of mammalian saposin-fold proteins; in fact, it shows no sequence homology with mammalian proteins. Nevertheless, the molecular architectures are similar, and the shared propensity for membrane interaction suggests strongly that PAS factor is another member of the saposin-fold family. Analysis of the CD spectra showed that PAS factor binds to membranes directly, while measurement of calcein dye leakage showed that PAS factor interacts strongly with liposomes composed of anionic phospholipids, making them leaky, but binds very weakly with liposomes composed of zwitterionic phospholipids. Moreover, by analyzing tryptophan fluorescence emission from four single-tryptophan mutants (V10W, T22W, F35W, and L70W), we identified the putative phospholipid-binding site of PAS factor. The resultant membrane destabilization likely mediates secretion of periplasmic proteins required for the in vivo survival and pathogenesis of V.vulnificus.

Control of Alicyclobacillus acidoterrestris in fruit juices by enterocin AS-48

Alicyclobacillus acidoterrestris is a spoilage-causing bacterium in fruit juices. Control of this bacterium by enterocin AS-48 from Enterococcus faecalis A-48-32 is described. Enterocin AS-48 was active against one A. acidocaldarius and three strains of A. acidoterrestris tested. In natural orange and apple juices incubated at 37 degrees C, vegetative cells of A. acidoterrestris DSMZ 2,498 were inactivated by enterocin AS-48 (2.5 microg/ml) and no growth was observed in 14 days. In commercial fruit juices added of AS-48 (2.5 microg/ml) and inoculated with vegetative cells or with endospores of strain DSMZ 2,498, no viable cells were detected during 90 days of incubation at temperatures of 37 degrees C, 15 degrees C or 4 degrees C, except for apple, peach and grapefruit juices inoculated with vegetative cells and incubated at 37 degrees C which were protected efficiently for up to 60 days. Remarkably, in all commercial fruit juices tested, no viable cells were detected as early as 15 min after incubation with the bacteriocin. Endospores incubated for a very short time (1 min) with increasing bacteriocin concentrations were inactivated by 2.5 microg/ml AS-48. Electron microscopy examination of vegetative cells and endospores treated with enterocin AS-48 revealed substantial cell damage and bacterial lysis as well as disorganization of endospore structure.

Stability of enterocin AS-48 in fruit and vegetable juices

Enterocin AS-48 is a candidate bacteriocin for food biopreservation. Before addressing application of AS-48 to vegetable-based foods, the interaction between AS-48 and vegetable food components and the stability of AS-48 were studied. Enterocin AS-48 had variable interactions with fruit and vegetable juices, with complete, partial, or negligible loss of activity. For some juices, loss of activity was ameliorated by increasing the bacteriocin concentration, diluting the juice, or applying a heat pretreatment. In juices obtained from cabbage, cauliflower, lettuce, green beans, celery, and avocado, AS-48 was very stable for the first 24 to 48 h of storage under refrigeration, and decay of activity was markedly influenced by storage temperature. In fresh-made fruit juices (orange, apple, grapefruit, pear, pineapple, and kiwi) and juice mixtures, AS-48 was very stable for at least 15 days at 4 degrees C, and bacteriocin activity was still detectable after 30 days of storage. Gradual and variable loss of activity occurred in juices stored at 15 and 28 degrees C; inactivation was faster at higher temperatures. In commercial fruit juices (orange, apple, peach, and pineapple) stored at 4 degrees C, the bacteriocin was completely stable for up to 120 days, and over 60% of initial activity was still present in juices stored at 15 degrees C for the same period. Commercial fruit juices stored at 28 degrees C for 120 days retained between 31.5% (apple) and 67.71% (peach) of their initial bacteriocin activity. Solutions of AS-48 in sterile distilled water were stable (120 days at 4 to 28 degrees C). Limited loss of activity was observed after mixing AS-48 with some food-grade dyes and thickening agents. Enterocin AS-48 added to lettuce juice incubated at 15 degrees C reduced viable counts of Listeria monocytogenes CECT 4032 and Bacillus cereus LWL1 to below detection limits and markedly reduced viable counts of Staphylococcus aureus CECT 976.

Enterocin AS-48RJ: a variant of enterocin AS-48 chromosomally encoded by Enterococcus faecium RJ16 isolated from food

The bacteriocinogenic strain RJ16 isolated from goat cheese has been identified as Enterococcusfaecium by species-specific PCR, DNA-rRNA hybridization and rDNA sequencing. Purified bacteriocin from strain RJ16 is a carboxypeptidase A-resistant peptide with a molecular mass (7125 Da) very close to the cyclic peptide enterocin AS-48. Bacteriocin from strain RJ16 and AS-48 show identical antibacterial spectra, although the former is slightly less active on strains of Listeria monocytogenes and Bacillus cereus. Producer strains show cross-immunity. PCR amplification of total DNA from strain RJ16 with primers for the AS-48 structural gene and sequencing of the amplified fragment revealed an almost identical sequence (99.5%), except for a single mutation that predicts the change of Glu residue at position 20 of AS-48 to Val. Therefore, bacteriocin produced by E. faecium RJ16 should be considered a variant of AS-48, which we call AS-48RJ. PCR amplification revealed that strain RJ16 contains the complete as-48. gene cluster. Hybridization with probes for as-48 gene cluster revealed a chromosomal location of as-48 genes in strain RJ16, being the first example of a chromosomal location of this bacteriocin trait. Strain RJ16 produced enzymes of interest in food processing (esterase, esterase lipase and phytase activities), and did not decarboxylate amino acids precursors for biogenic amines. Strain RJ16 did not exhibit haemolytic or gelatinase activities, and PCR amplification revealed the lack of genes encoding for known virulence determinants (aggregation substance, collagen adhesin, enterococcal surface protein, endocarditis antigens, as well as haemolysin and gelatinase production). Strain RJ16 was resistant to ciprofloxacin (MIC > 2 mgl(-1)) and levofloxacin (MIC > 4 mgl(-1)) and showed intermediate resistance to nitrofurantoin and erythromycin, but was sensitive to ampicillin, penicillin, streptomycin, gentamicin, rifampicin, chloramphenicol, tetracycline, quinupristin/dalfopristin, vancomycin and teicoplanin. Altogether, results from this study suggest that this broad-spectrum bacteriocin-producing strain may have a potential use in food preservation.

Practical lessons from protein structure prediction

Despite recent efforts to develop automated protein structure determination protocols, structural genomics projects are slow in generating fold assignments for complete proteomes, and spatial structures remain unknown for many protein families. Alternative cheap and fast methods to assign folds using prediction algorithms continue to provide valuable structural information for many proteins. The development of high-quality prediction methods has been boosted in the last years by objective community-wide assessment experiments. This paper gives an overview of the currently available practical approaches to protein structure prediction capable of generating accurate fold assignment. Recent advances in assessment of the prediction quality are also discussed.

Virulence factors of Enterococcus faecalis: relationship to endodontic disease

Enterococcus faecalis is a micro-organism that can survive extreme challenges. Its pathogenicity ranges from life-threatening diseases in compromised individuals to less severe conditions, such as infection of obturated root canals with chronic apical periodontitis. In the latter situation, the infecting organisms are partly shielded from the defense mechanisms of the body. In this article, we review the virulence factors of E. faecalis that may be related to endodontic infection and the periradicular inflammatory response. The most-cited virulence factors are aggregation substance, surface adhesins, sex pheromones, lipoteichoic acid, extracellular superoxide production, the lytic enzymes gelatinase and hyaluronidase, and the toxin cytolysin. Each of them may be associated with various stages of an endodontic infection as well as with periapical inflammation. While some products of the bacterium may be directly linked to damage of the periradicular tissues, a large part of the tissue damage is probably mediated by the host response to the bacterium and its products.

Design, NMR characterization and activity of a 21-residue peptide fragment of bacteriocin AS-48 containing its putative membrane interacting region

Bacteriocin AS-48 is a 70-residue cyclic polypeptide from Enterococcus faecalis that shows a broad antimicrobial spectrum against both Gram-positive and Gram-negative bacteria. The structure of bacteriocin AS-48 consists of a globular arrangement of five helices with a high positive electrostatic potential in the region comprising helix 4, the turn linking helix 4 and 5, and the N-terminus of helix 5. This region has been considered to participate in its biological activity and in particular in membrane permeation. To understand the mechanism of the antibacterial activity of AS-48 and to discriminate the several mechanisms proposed, a simplified bacteriocin was designed consisting of 21 residues and containing the high positively charged region. A disulfide bridge was introduced at an appropriate position to stabilize the peptide and to conserve the helix-turn-helix arrangement in the parent molecule. According to (1)H and (13)C NMR data, the designed simplified bacteriocin fragment adopts a significant population of a native-like helical hairpin conformation in aqueous solution, which is further stabilized in 30% TFE. The designed peptide does not show any antibacterial activity, though it is shown to compete with the intact native bacteriocin AS-48. These results suggest that the mechanism of membrane disruption by bacteriocin is not as simple as being driven by a deposition of positively charged molecules on the plane of the bacterial membrane. Some other regions of the protein must be present such as, for instance, hydrophobic regions so as to enhance the accumulation of the peptide and favour membrane permeation.

Functional analysis of the gene cluster involved in production of the bacteriocin circularin A by Clostridium beijerinckii ATCC 25752

A region of 12 kb flanking the structural gene of the cyclic antibacterial peptide circularin A of Clostridium beijerinckii ATCC 25752 was sequenced, and the putative proteins involved in the production and secretion of circularin A were identified. The genes are tightly organized in overlapping open reading frames. Heterologous expression of circularin A in Enterococcus faecalis was achieved, and five genes were identified as minimally required for bacteriocin production and secretion. Two of the putative proteins, CirB and CirC, are predicted to contain membrane-spanning domains, while CirD contains a highly conserved ATP-binding domain. Together with CirB and CirC, this ATP-binding protein is involved in the production of circularin A. The fifth gene, cirE, confers immunity towards circularin A when expressed in either Lactococcus lactis or E. faecalis and is needed in order to allow the bacteria to produce bacteriocin. Additional resistance against circularin A is conferred by the activity of the putative transporter consisting of CirB and CirD.

Structure of bacteriocin AS-48: from soluble state to membrane bound state

The bacteriocin AS-48 is a membrane-interacting peptide, which displays a broad anti-microbial spectrum against Gram-positive and Gram-negative bacteria. The NMR structure of AS-48 at pH 3 has been solved. The analysis of this structure suggests that the mechanism of AS-48 anti-bacterial activity involves the accumulation of positively charged molecules at the membrane surface leading to a disruption of the membrane potential. Here, we report the high-resolution crystal structure of AS-48 and sedimentation equilibrium experiments showing that this bacteriocin is able to adopt different oligomeric structures according to the physicochemical environment. The analysis of these structures suggests a mechanism for molecular function of AS-48 involving a transition from a water-soluble form to a membrane-bound state upon membrane binding.

DNA-repair protein hHR23a alters its protein structure upon binding proteasomal subunit S5a

The Rad23 family of proteins, including the human homologs hHR23a and hHR23b, stimulates nucleotide excision repair and has been shown to provide a novel link between proteasome-mediated protein degradation and DNA repair. In this work, we illustrate how the proteasomal subunit S5a regulates hHR23a protein structure. By using NMR spectroscopy, we have elucidated the structure and dynamic properties of the 40-kDa hHR23a protein and show it to contain four structured domains connected by flexible linker regions. In addition, we reveal that these domains interact in an intramolecular fashion, and by using residual dipolar coupling data in combination with chemical shift perturbation analysis, we present the hHR23a structure. By itself, hHR23a adopts a closed conformation defined by the interaction of an N-terminal ubiquitin-like domain with two ubiquitin-associated domains. Interestingly, binding of the proteasomal subunit S5a disrupts the hHR23a interdomain interactions and thereby causes it to adopt an opened conformation.

An improved protein decoy set for testing energy functions for protein structure prediction

We have improved the original Rosetta centroid/backbone decoy set by increasing the number of proteins and frequency of near native models and by building on sidechains and minimizing clashes. The new set consists of 1,400 model structures for 78 different and diverse protein targets and provides a challenging set for the testing and evaluation of scoring functions. We evaluated the extent to which a variety of all-atom energy functions could identify the native and close-to-native structures in the new decoy sets. Of various implicit solvent models, we found that a solvent-accessible surface area-based solvation provided the best enrichment and discrimination of close-to-native decoys. The combination of this solvation treatment with Lennard Jones terms and the original Rosetta energy provided better enrichment and discrimination than any of the individual terms. The results also highlight the differences in accuracy of NMR and X-ray crystal structures: a large energy gap was observed between native and non-native conformations for X-ray structures but not for NMR structures.

Purification of bacteriocin AS-48 from an Enterococcus faecium strain and analysis of the gene cluster involved in its production

The cyclic bacteriocin AS-48 has previously been shown to be produced by Enterococcus faecalis strains. A bacteriocin has been purified from an E. faecium strain (E. faecium 7C5), and it has been found to possess molecular mass, cyclization and amino acid sequence typical of bacteriocin AS-48. In addition to the structural gene as-48A, the sequence analysis of the AS-48 gene cluster present in E. faecium 7C5 has revealed the presence of several putative coding regions presumably involved in bacteriocin production and immunity. The results of DNA hybridization assays have indicated that the AS-48 gene cluster and the gene pd78 are present on the same plasmid, possibly the pPD1 plasmid, in E. faecium 7C5.

Identification and characterization of two novel clostridial bacteriocins, circularin A and closticin 574

Two novel antibacterial peptides of clostridial species were purified, N-terminally sequenced, and characterized. Moreover, their structural genes were identified. Closticin 574 is an 82-amino-acid bacteriocin produced by Clostridium tyrobutyricum ADRIAT 932. The supernatant of the producing strain showed a high level of activity against the indicator strain C. tyrobutyricum. The protein is synthesized as a preproprotein that is possibly secreted via the general secretion pathway, after which it is hydrolyzed at an Asp-Pro site. Circularin A is produced by Clostridium beijerinckii ATCC 25752 as a prepeptide of 72 amino acids. Cleavage of the prepeptide between the third leucine and fourth valine residues followed by a head-to-tail ligation between the N and C termini creates a circular antimicrobial peptide of 69 amino acids. The unusually small circularin A leader peptide of three amino acids is cleaved off in this process. The supernatant of C. beijerinckii ATCC 25752 showed a broad antibacterial activity range.

Structure and dynamics of the potato carboxypeptidase inhibitor by 1H and 15N NMR

The solution structure and backbone dynamics of the recombinant potato carboxypeptidase inhibitor (PCI) have been characterized by NMR spectroscopy. The structure, determined on the basis of 497 NOE-derived distance constraints, is much better defined than the one reported in a previous NMR study, with an average pairwise backbone root-mean-square deviation of 0.5 A for the well-defined region of the protein, residues 7-37. Many of the side-chains show now well-defined conformations, both in the hydrophobic core and on the surface of the protein. Overall, the solution structure of free PCI is similar to the one that it shows in the crystal of the complex with carboxypeptidase A. However, some local differences are observed in regions 15-21 and 27-29. In solution, the six N-terminal and the two C-terminal residues are rather flexible, as shown by 15N backbone relaxation measurements. The flexibility of the latter segment may have implications in the binding of the inhibitor by the enzyme. All the remaining residues in the protein are essentially rigid (S2 > 0.8) with the exception of two of them at the end of a short 3/10 helix. Despite the small size of the protein, a number of amide protons are protected from exchange with solvent deuterons. The slowest exchanging protons are those in a small two-strand beta-sheet. The unfolding free energies, as calculated from the exchange rates of these protons, are around 5 kcal/mol. Other protected amide protons are located in the segment 7-12, adjacent to the beta-sheet. Although these residues are not in an extended conformation in PCI, the equivalent residues in structurally homologous proteins form a third strand of the central beta-sheet. The amide protons in the 3/10 helix are only marginally protected, indicating that they exchange by a local unfolding mechanism, which is consistent with the increase in flexibility shown by some of its residues. Backbone alignment-based programs for folding recognition, as opposite to disulfide-bond alignments, reveal new proteins of unrelated sequence and function with a similar structure.

Characterization of a new operon, as-48EFGH, from the as-48 gene cluster involved in immunity to enterocin AS-48

Enterocin AS-48 is a cyclic peptide produced by Enterococcus faecalis S-48 whose genetic determinants have been identified in the conjugative plasmid pMB2. A region of 7.8 kb, carrying the minimum information required for production of and immunity against AS-48, had been previously cloned and sequenced in pAM401 (pAM401-52). In this region, the as-48A structural gene and as-48B, as-48C, as-48C(1), as-48D, and as-48D(1) genes and open reading frame 6 (ORF6) and ORF7 had been identified. The sequence analysis carried out in this work in the BglII B fragment (6.6-kb) from pMB2 cloned downstream from the last ORF identified (ORF7) revealed the existence of two new ORFs, as-48G and as-48H, necessary for full AS-48 expression. Thus, JH2-2 transformants obtained with the pAM401-81 plasmid became producers and resistant at the wild-type level. Tn5 disruption experiments in the last genes, as-48EFGH, were not able to reproduce these expression levels, confirming that expression of these genes is necessary to get the phenotype conferred by the wild-type pMB2 plasmid. The as-48EFGH operon encodes a new ABC transporter that could be involved in producer self-protection. On the basis of the observed similarities, As-48G would be the ATP-binding domain, the deduced amino acid sequences of As-48E and As48-H could be assigned as transmembrane subunits, and As-48F, with an N-terminal transmembrane segment and a coiled-coil domain, strongly resembles the structure of some known ABC transporter accessory proteins whose localization in the cell is discussed. This cluster of genes is expressed by two polycistronic mRNAs, T(2) and T(3), in JH2-2(pAM401-81) in coordinate expression. Our results also suggest that expression of T(3) could be regulated, because in JH2-2(pAM401(EH)) transformants, T(3) was not detected, suggesting that these genes do not by themselves confer immunity, in accordance with the requirement for the as-48D(1) gene for immunity against AS-48.

Granulysin crystal structure and a structure-derived lytic mechanism

Our crystal structure of granulysin suggests a mechanism for lysis of bacterial membranes by granulysin, a 74-residue basic protein from human cytolytic T lymphocyte and natural killer cells. We determined the initial crystal structure of selenomethionyl granulysin by MAD phasing at 2A resolution. We present the structure model refined using native diffraction data to 0.96A resolution. The five-helical bundle of granulysin resembles other "saposin folds" (such as NK-lysin). Positive charges distribute in a ring around the granulysin molecule, and one face has net positive charge. Sulfate ions bind near the segment of the molecule identified as most membrane-lytic and of highest hydrophobic moment. The ion locations may indicate granulysin's orientation of initial approach towards the membrane. The crystal packing reveals one way to pack a sheet of granulysin molecules at the cell surface for a concerted lysis effort. The energy of binding granulysin charges to the bacterial membrane could drive the subsequent lytic processes. The loosely packed core facilitates a hinge or scissors motion towards exposure of hydrophobic surface that we propose tunnels the granulysin into the fracturing target membrane.

Crystal structure of saposin B reveals a dimeric shell for lipid binding

Saposin B is a small, nonenzymatic glycosphingolipid activator protein required for the breakdown of cerebroside sulfates (sulfatides) within the lysosome. The protein can extract target lipids from membranes, forming soluble protein-lipid complexes that are recognized by arylsulfatase A. The crystal structure of human saposin B reveals an unusual shell-like dimer consisting of a monolayer of alpha-helices enclosing a large hydrophobic cavity. Although the secondary structure of saposin B is similar to that of the known monomeric members of the saposin-like superfamily, the helices are repacked into a different tertiary arrangement to form the homodimer. A comparison of the two forms of the saposin B dimer suggests that extraction of target lipids from membranes involves a conformational change that facilitates access to the inner cavity.

De novo prediction of three-dimensional structures for major protein families

We use the Rosetta de novo structure prediction method to produce three-dimensional structure models for all Pfam-A sequence families with average length under 150 residues and no link to any protein of known structure. To estimate the reliability of the predictions, the method was calibrated on 131 proteins of known structure. For approximately 60% of the proteins one of the top five models was correctly predicted for 50 or more residues, and for approximately 35%, the correct SCOP superfamily was identified in a structure-based search of the Protein Data Bank using one of the models. This performance is consistent with results from the fourth critical assessment of structure prediction (CASP4). Correct and incorrect predictions could be partially distinguished using a confidence function based on a combination of simulation convergence, protein length and the similarity of a given structure prediction to known protein structures. While the limited accuracy and reliability of the method precludes definitive conclusions, the Pfam models provide the only tertiary structure information available for the 12% of publicly available sequences represented by these large protein families.

Rosetta in CASP4: progress in ab initio protein structure prediction

Rosetta ab initio protein structure predictions in CASP4 were considerably more consistent and more accurate than previous ab initio structure predictions. Large segments were correctly predicted (>50 residues superimposed within an RMSD of 6.5 A) for 16 of the 21 domains under 300 residues for which models were submitted. Models with the global fold largely correct were produced for several targets with new folds, and for several difficult fold recognition targets, the Rosetta models were more accurate than those produced with traditional fold recognition models. These promising results suggest that Rosetta may soon be able to contribute to the interpretation of genome sequence information.

Predicting novel protein folds by using FRAGFOLD

The results of applying a fragment-based protein tertiary structure prediction method to the prediction of 8 CASP4 targets are described. The method is based on the assembly of supersecondary structural fragments taken from highly resolved protein structures using a simulated annealing algorithm. Despite the significant degree of success in this case, there is clearly much more developmental work required before predictions with the accuracy of a good homology model, or even a good fold recognition model, can be made with use of this kind of approach.

CASP2 knowledge-based approach to distant homology recognition and fold prediction in CASP4

In 1996, in CASP2, we presented a semimanual approach to the prediction of protein structure that was aimed at the recognition of probable distant homology, where it existed, between a given target protein and a protein of known structure (Murzin and Bateman, Proteins 1997; Suppl 1:105-112). Central to our method was the knowledge of all known structural and probable evolutionary relationships among proteins of known structure classified in the SCOP database (Murzin et al., J Mol Biol 1995;247:536-540). It was demonstrated that a knowledge-based approach could compete successfully with the best computational methods of the time in the correct recognition of the target protein fold. Four years later, in CASP4, we have applied essentially the same knowledge-based approach to distant homology recognition, concentrating our effort on the improvement of the completeness and alignment accuracy of our models. The manifold increase of available sequence and structure data was to our advantage, as well as was the experience and expertise obtained through the classification of these data. In particular, we were able to model most of our predictions from several distantly related structures rather than from a single parent structure, and we could use more superfamily characteristic features for the refinement of our alignments. Our predictions for each of the attempted distant homology recognition targets ranked among the few top predictions for each of these targets, with the predictions for the hypothetical protein HI0065 (T0104) and the C-terminal domain of the ABC transporter MalK (T0121C) being particularly successful. We also have attempted the prediction of protein folds of some of the targets tentatively assigned to new superfamilies. The average quality of our fold predictions was far less than the quality of our distant homology recognition models, but for the two targets, chorismate lyase (T0086) and Appr>p cyclic phosphodiesterase (T0094), our predictions achieved the top ranking.

The denaturation of circular enterocin AS-48 by urea and guanidinium hydrochloride

The unfolding thermodynamics of the circular enterocin protein AS-48, produced by Enterococcus faecalis, has been studied. The native structure of the 70-amino-acid-long protein turned out to be extremely stable against heat and denaturant-induced unfolding. At pH 2.5 and low ionic strength, it denatures at 102 degrees C, while at 25 degrees C, the structure only unfolds in 6.3 M guanidinium hydrochloride (GuHCl) and does not unfold even in 8 M urea. A comparison of its thermal unfolding in water and in the presence of urea shows a good correspondence between the two deltaGw(298) values, which are about 30 kJ mol(-1) at pH 2.5 and low ionic strength. The stability of the structure is highly dependent upon ionic strength and so GuHCl acts both as a denaturant and a stabilising agent. This seems to be why the deltaGw(298) value calculated from the unfolding data in GuHCl is twice as high as in the absence of this salt. At least part of the high stability of native AS-48 can almost certainly be put down to its circular organization since other structural features are quite normal for a protein of this size.

Inhibition of bacterial growth, enterotoxin production, and spore outgrowth in strains of Bacillus cereus by bacteriocin AS-48

Bacteriocin AS-48 showed high bactericidal activity for mesophilic and psychrotrophic strains of Bacillus cereus over a broad pH range. AS-48 inhibition of the enterotoxin-producing strain LWL1 was enhanced by sodium nitrite, sodium lactate, and sodium chloride. The latter also enhanced AS-48 activity against strain CECT 131. Bacterial growth and enterotoxin production by strain LWL1 were completely inhibited at bacteriocin concentrations of 7.5 microg/ml. At subinhibitory bacteriocin concentrations, enterotoxin production decreased markedly and sporulation was delayed. Intact spores were resistant to AS-48 but became gradually sensitive to AS-48 during the course of germination.

Circular proteins--no end in sight

Circular proteins are a recently discovered phenomenon. They presumably evolved to confer advantages over ancestral linear proteins while maintaining the intrinsic biological functions of those proteins. In general, these advantages include a reduced sensitivity to proteolytic cleavage and enhanced stability. In one remarkable family of circular proteins, the cyclotides, the cyclic backbone is additionally braced by a knotted arrangement of disulfide bonds that confers additional stability and topological complexity upon the family. This article describes the discovery, structure, function and biosynthesis of the currently known circular proteins. The discovery of naturally occurring circular proteins in the past few years has been complemented by new chemical and biochemical methods to make synthetic circular proteins; these are also briefly described.

Crystal structure of a cyclic form of bovine pancreatic trypsin inhibitor

The crystal structure of a cyclic form of a mutant of bovine pancreatic trypsin inhibitor has been solved at 1.0 A resolution. The protein was synthesized by native chemical ligation and its structure is almost indistinguishable from the previously described recombinant form of the same mutant; however, the new loop containing the former termini became much better ordered.

Protein structure prediction and structural genomics

Genome sequencing projects are producing linear amino acid sequences, but full understanding of the biological role of these proteins will require knowledge of their structure and function. Although experimental structure determination methods are providing high-resolution structure information about a subset of the proteins, computational structure prediction methods will provide valuable information for the large fraction of sequences whose structures will not be determined experimentally. The first class of protein structure prediction methods, including threading and comparative modeling, rely on detectable similarity spanning most of the modeled sequence and at least one known structure. The second class of methods, de novo or ab initio methods, predict the structure from sequence alone, without relying on similarity at the fold level between the modeled sequence and any of the known structures. In this Viewpoint, we begin by describing the essential features of the methods, the accuracy of the models, and their application to the prediction and understanding of protein function, both for single proteins and on the scale of whole genomes. We then discuss the important role that protein structure prediction methods play in the growing worldwide effort in structural genomics.

AS-48: a circular protein with an extremely stable globular structure

The unfolding thermodynamics of the circular enterocin protein AS-48, produced by Enterococcus faecalis, has been characterized by differential scanning calorimetry. The native structure of the 70-residue protein is extremely thermally stable. Thus, at pH 2.5 and low ionic strength thermal denaturation occurs under equilibrium at 102 degrees C, while the unfolded state irreversibly aggregates at neutral and alkaline pH. Calorimetric data analysis shows that the specific enthalpy change upon unfolding is unusually small and the heat capacity change is quite normal for a protein of this size, whereas the Gibbs energy change at 25 degrees C is relatively high. At least part of this high stability might be put down to entropic constraints induced by the circular organization of the polypeptide chain.

Functional inferences from blind ab initio protein structure predictions

Ab initio protein structure prediction methods have improved dramatically in the past several years. Because these methods require only the sequence of the protein of interest, they are potentially applicable to the open reading frames in the many organisms whose sequences have been and will be determined. Ab initio methods cannot currently produce models of high enough resolution for use in rational drug design, but there is an exciting potential for using the methods for functional annotation of protein sequences on a genomic scale. Here we illustrate how functional insights can be obtained from low-resolution predicted structures using examples from blind ab initio structure predictions from the third and fourth critical assessment of structure prediction (CASP3, CASP4) experiments.

Solution structure of microcin J25, the single macrocyclic antimicrobial peptide from Escherichia coli

The three-dimensional solution structure of microcin J25, the single cyclic representative of the microcin antimicrobial peptide class produced by enteric bacteria, was determined using two-dimensional 1H NMR spectroscopy and molecular modeling. This hydrophobic 21-residue peptide exhibits potent activity directed to Gram-negative bacteria. Its primary structure, cyclo(-V1GIGTPISFY10GGGAGHVPEY20F-), has been determined previously [Blond, A., Péduzzi, J., Goulard, C., Chiuchiolo, M. J., Barthélémy, M., Prigent, Y., Salomón, R.A., Farías, R.N., Moreno, F. & Rebuffat, S. (1999) Eur. J. Biochem., 259, 747-755]. Conformational parameters (3JNHCalphaH coupling constants, quantitative nuclear Overhauser enhancement data, chemical shift deviations, temperature coefficients of amide protons, NH-ND exchange rates) were obtained in methanol solution. Structural restraints consisting of 190 interproton distances inferred from NOE data, 11 phi backbone dihedral angle and 9 chi1 angle restraints derived from the coupling constants and three hydrogen bonds in agreement with the amide exchange rates were used as input for simulated annealing calculations and energy minimization in the program XPLOR. Microcin J25 adopts a well-defined compact structure consisting of a distorted antiparallel beta sheet, which is twisted and folded back on itself, thus resulting in three loops. Residues 7-10 and 17-20 form the more regular part of the beta sheet. The region encompassing residues Gly11-His16 consists of a distorted beta hairpin, which divides into two small loops and is stabilized by an inverse gamma turn and a type I' beta turn. The reversal of the chain leading to the Phe21-Pro6 loop results from a mixed beta/gamma turn. A cavity, in which the hydrophilic Ser8 side-chain is confined, is delimited by two crab pincer-like regions that comprise residues 6-8 and 18-1.

Bacteriocin production in vancomycin-resistant and vancomycin-susceptible Enterococcus isolates of different origins

Bacteriocin production was determined for 218 Enterococcus isolates (Enterococcus faecalis [93] and E. faecium [125]) obtained from different origins (human clinical samples [87], human fecal samples [78], sewage [28], and chicken samples [25]) and showing different vancomycin susceptibility patterns (vancomycin resistant, all of them vanA positive [56], and vancomycin susceptible [162]). All enterococcal isolates were randomly selected except for the vancomycin-resistant ones. A total of 33 isolates of eight different bacterial genera were used as indicators for bacteriocin production. Forty-seven percent of the analyzed enterococcal isolates were bacteriocin producers (80.6% of E. faecalis and 21.6% of E. faecium isolates). The percentage of bacteriocin producers was higher among human clinical isolates (63.2%, 81.8% of vancomycin-resistant isolates and 60.5% of vancomycin-susceptible ones) than among isolates from the other origins (28 to 39.3%). Only one out of the 15 vancomycin-resistant isolates from human fecal samples was a bacteriocin producer, while 44.4% of fecal vancomycin-susceptible isolates were. The bacteriocin produced by the vanA-containing E. faecium strain RC714, named bacteriocin RC714, was further characterized. This bacteriocin activity was cotransferred together with the vanA genetic determinant to E. faecalis strain JH2-2. Bacteriocin RC714 was purified to homogeneity and its primary structure was determined by amino acid sequencing, showing an identity of 88% and a similarity of 92% with the previously described bacteriocin 31 from E. faecalis YI717. The presence of five different amino acids in bacteriocin RC714 suggest that this could be a new bacteriocin. The results obtained suggest that the epidemiology of vancomycin resistance may be influenced by different factors, including bacteriocin production.

Recent improvements in prediction of protein structure by global optimization of a potential energy function

Recent improvements of a hierarchical ab initio or de novo approach for predicting both alpha and beta structures of proteins are described. The united-residue energy function used in this procedure includes multibody interactions from a cumulant expansion of the free energy of polypeptide chains, with their relative weights determined by Z-score optimization. The critical initial stage of the hierarchical procedure involves a search of conformational space by the conformational space annealing (CSA) method, followed by optimization of an all-atom model. The procedure was assessed in a recent blind test of protein structure prediction (CASP4). The resulting lowest-energy structures of the target proteins (ranging in size from 70 to 244 residues) agreed with the experimental structures in many respects. The entire experimental structure of a cyclic alpha-helical protein of 70 residues was predicted to within 4.3 A alpha-carbon (C(alpha)) rms deviation (rmsd) whereas, for other alpha-helical proteins, fragments of roughly 60 residues were predicted to within 6.0 A C(alpha) rmsd. Whereas beta structures can now be predicted with the new procedure, the success rate for alpha/beta- and beta-proteins is lower than that for alpha-proteins at present. For the beta portions of alpha/beta structures, the C(alpha) rmsd's are less than 6.0 A for contiguous fragments of 30-40 residues; for one target, three fragments (of length 10, 23, and 28 residues, respectively) formed a compact part of the tertiary structure with a C(alpha) rmsd less than 6.0 A. Overall, these results constitute an important step toward the ab initio prediction of protein structure solely from the amino acid sequence.