The electromechanics of DNA in a synthetic nanopore

Microscopic mechanics of hairpin DNA translocation through synthetic nanopores

Nanoscale pores have proved useful as a means to assay DNA and are actively being developed as the basis of genome sequencing methods. Hairpin DNA (hpDNA), having both double-helical and overhanging coil portions, can be trapped in a nanopore, giving ample time to execute a sequence measurement. In this article, we provide a detailed account of hpDNA interaction with a synthetic nanopore obtained through extensive all-atom molecular dynamics simulations. For synthetic pores with minimum diameters from 1.3 to 2.2 nm, we find that hpDNA can translocate by three modes: unzipping of the double helix and--in two distinct orientations--stretching/distortion of the double helix. Furthermore, each of these modes can be selected by an appropriate choice of the pore size and voltage applied transverse to the membrane. We demonstrate that the presence of hpDNA can dramatically alter the distribution of ions within the pore, substantially affecting the ionic current through it. In experiments and simulations, the ionic current relative to that in the absence of DNA can drop below 10% and rise beyond 200%. Simulations associate the former with the double helix occupying the constriction and the latter with accumulation of DNA that has passed through the constriction.

Translocation of a stiff polymer in a microchannel

The voltage-driven dynamics of a stiff polymer through a nanopore are treated with a bend elastic model. In contrast to flexible polymers described by a stretch elasticity, bend elastic chains can be oriented in an external field, here the anchoring field created by the pore atoms. The trajectory of the chain is calculated using the Langevin equation of motion. The dynamical equation is solved by a normal mode analysis of the elastic curve with free ends. Interaction with the pore walls acts to align the chain, and with the electric field induced inside the pore controls the translocation time. Application of a force proportional to the distance of the exit from the end of the pore such as an optical trap slows down the motion, and reduces the chain response to the wall potential and the extension along the pore axis. DNA is a well-known semirigid polymer, and a comparison is made to the molecular dynamics simulation of translocation of DNA through a synthetic nanopore.

Dynamics of DNA translocation through an attractive nanopore

We investigate the dynamics of single-stranded DNA translocation through a nanopore driven by an external force using Langevin dynamics simulations in two dimensions to study how the translocation dynamics depend on the details of the DNA sequences. We consider a coarse-grained model of DNA built from two bases A and C, having different base-pore interactions, e.g., a strong (weak) attractive force between the pore and the base A (C) inside the pore. From a series of studies on hetero-DNAs with repeat units AmCn, we find that the translocation time decreases exponentially as a function of the volume fraction fC of the base C. For longer A sequences with fC<or=0.5, the translocation time strongly depends on the orientation of DNA, namely which base enters the pore first. Our studies clearly demonstrate that for a DNA of certain length N with repeat units AmCn, the pattern exhibited by the waiting times of the individual bases and their periodicity can unambiguously determine the values of m, n, and N, respectively. Therefore, a prospective experimental realization of this phenomenon may lead to fast and efficient sequence detection.

Electromechanical unzipping of individual DNA molecules using synthetic sub-2 nm pores

Nanopores have recently emerged as high-throughput tools for probing and manipulating nucleic acid secondary structure at the single-molecule level. While most studies to date have utilized protein pores embedded in lipid bilayers, solid-state nanopores offer many practical advantages which greatly expand the range of applications in life sciences and biotechnology. Using sub-2 nm solid-state nanopores, we show for the first time that the unzipping kinetics of individual DNA duplexes can be probed by analyzing the dwell-time distributions. We performed high-bandwidth electrical measurements of DNA duplex unzipping as a function of their length, sequence, and temperature. We find that our longer duplexes (>10 bp) follow Arrhenius dependence on temperature, suggesting that unzipping can be approximated as a single-barrier crossing, but the unzipping kinetics of shorter duplexes do not involve a barrier, due to the strong biasing electrical force. Finally, we show that mismatches in the duplex affect unzipping times in a position-sensitive manner. Our results are a crucial step toward sequence variability detection and our single-molecule nanopore sequencing technology, which rely on parallel detection from nanopore arrays.

Electrophoresis of ssDNA through nanoelectrode gaps from molecular dynamics: impact of gap width and chain length

Molecular dynamics simulations were performed to study the translocation of single-stranded (ss) DNA through the nanoscale gap between the nanoscale electrodes of a proposed genomic sequencing device. An applied electric field forces the ssDNA to move in the direction of the nanoscale gap in platinum electrodes. A series of simulations utilizing eight different nanoscale gap distances as well as seven different nucleotide chain lengths were performed to determine the impact of these variables on the overall design of the sequencing device and the translocation behavior of ssDNA. The results clearly indicate a threshold value of the gap width below which the ssDNA will readily enter and traverse the nanoscale gap. Translocation velocities obtained for various chain lengths were consistent with simulated bulk data; however, successful translocation was inconsistent, possibly related to the sample's affinity for the metal electrodes. An attempt at overcoming this barrier was made through the implementation of shaped electrodes as well as pre-threading of the ssDNA sample.

Theory of DNA translocation through narrow ion channels and nanopores with charged walls

Translocation of a single-stranded DNA molecule through genetically engineered alpha -hemolysin channels with positively charged walls is studied. It is predicted that transport properties of such channels are dramatically different from neutral wild-type alpha -hemolysin channels. We assume that the wall charges compensate a fraction x of the bare charge q_{b} of the DNA piece residing in the channel. Our predictions are as follows. (i) At small concentration of salt the blocked ion current decreases with x . (ii) The effective charge q_{s} of the DNA piece, which is very small at x=0 (neutral channel) grows with x and at x=1 reaches q_{b} . (iii) The rate of DNA capture by the channel grows exponentially with x . Our theory is also applicable to translocation of a double-stranded DNA molecular in narrow solid state nanopores with positively charged walls.

Modulation of T4 gene 32 protein DNA binding activity by the recombination mediator protein UvsY

Bacteriophage T4 UvsY is a recombination mediator protein that promotes assembly of the UvsX-ssDNA presynaptic filament. UvsY helps UvsX to displace T4 gene 32 protein (gp32) from ssDNA, a reaction necessary for proper formation of the presynaptic filament. Here we use DNA stretching to examine UvsY interactions with single DNA molecules in the presence and absence of gp32 and a gp32 C-terminal truncation (*I), and show that in both cases UvsY is able to destabilize gp32-ssDNA interactions. In these experiments UvsY binds more strongly to dsDNA than ssDNA due to its inability to wrap ssDNA at high forces. To support this hypothesis, we show that ssDNA created by exposure of stretched DNA to glyoxal is strongly wrapped by UvsY, but wrapping occurs only at low forces. Our results demonstrate that UvsY interacts strongly with stretched DNA in the absence of other proteins. In the presence of gp32 and *I, UvsY is capable of strongly destabilizing gp32-DNA complexes in order to facilitate ssDNA wrapping, which in turn prepares the ssDNA for presynaptic filament assembly in the presence of UvsX. Thus, UvsY mediates UvsX binding to ssDNA by converting rigid gp32-DNA filaments into a structure that can be strongly bound by UvsX.

Label-free detection of single protein molecules and protein-protein interactions using synthetic nanopores

Nanofabricated pores in 20 nm-thick silicon nitride membranes were used to probe various protein analytes as well as to perform an antigen-antibody binding assay. A two-compartment electrochemical cell was separated by a single nanopore, 28 nm in diameter. Adding proteins to one compartment caused current perturbations in the ion current flowing through the pore. These perturbations correlated with both the charge and the size of the protein or of a protein-protein complex. The potential of this nanotechnology for studying protein-protein interactions is highlighted with the sensitive detection of beta-human chorionic gonadotropin, a hormone and clinical biomarker of pregnancy, by monitoring in real time and at a molecular level the formation of a complex between hormones and antibodies in solution. In this form, the assay compared advantageously to immunoassays, with the important difference that labels, immobilization, or amplification steps were no longer needed. In conclusion, we present proof-of-principle that properties of proteins and their interactions can be investigated in solution using synthetic nanopores and that these interactions can be exploited to measure protein concentrations accurately.

Noise and bandwidth of current recordings from submicrometer pores and nanopores

Nanopores and submicrometer pores have recently been explored for applications ranging from detection of single molecules, assemblies of nanoparticles, nucleic acids, occurrence of chemical reactions, and unfolding of proteins. Most of these applications rely on monitoring electrical current through these pores, hence the noise and signal bandwidth of these current recordings are critical for achieving accurate and sensitive measurements. In this report, we present a detailed theoretical and experimental study on the noise and signal bandwidth of current recordings from glass and polyethylene terephthalate (PET) membranes that contain a single submicrometer pore or nanopore. We examined the theoretical signal bandwidth of two different pore geometries, and we measured the signal bandwidth of the electronics used to record the ionic current. We also investigated the theoretical noise generated by the substrate material, the pore, and the electronics used to record the current. Employing a combination of theory and experimental results, we were able to predict the noise in current traces recorded from glass and PET pores with no applied voltage with an error of less than 12% in a range of signal bandwidths from 1 to 40 kHz. In approximately half of all experiments, application of a voltage did not significantly increase the noise. In the other half of experiments, however, application of a voltage resulted in an additional source of noise. For these pores, predictions of the noise were usually still accurate within 35% error at signal bandwidths of at least 10 kHz. The power spectra of this extra noise suggested a 1/f(alpha) origin with best fits to the power spectrum for alpha = 0.4-0.8. This work provides the theoretical background and experimental data for understanding the bandwidth requirements and the main sources of noise in current recordings; it will be useful for minimizing noise and achieving accurate recordings.

DNA overstretching in the presence of glyoxal: structural evidence of force-induced DNA melting

When a long DNA molecule is stretched beyond its B-form contour length, a transition occurs in which its length increases by a factor of 1.7, with very little force increase. A quantitative model was proposed to describe this transition as force-induced melting, where double-stranded DNA is converted into single-stranded DNA. The force-induced melting model accurately describes the thermodynamics of DNA overstretching as a function of solution conditions and in the presence of DNA binding ligands. An alternative explanation suggests a transformation into S-DNA, a double-stranded form which preserves the interstrand base pairing. To determine the extent to which DNA base pairs are exposed to solution during the transition, we held DNA overstretched to different lengths within the transition in the presence of glyoxal. If overstretching involved strand separation, then force-melted basepairs would be glyoxal-modified, thus essentially permanently single-stranded. Subsequent stretches confirm that a significant fraction of the DNA melted by force is permanently melted. This result demonstrates that DNA overstretching is accompanied by a disruption of the DNA helical structure, including a loss of hydrogen bonding.

Structural analysis of the Sulfolobus solfataricus MCM protein N-terminal domain

The Mini-Chromosome Maintenance (MCM) proteins are candidates of replicative DNA helicase in eukarya and archaea. Here we report a 2.8 Å crystal structure of the N-terminal domain (residues 1–268) of the Sulfolobus solfataricus MCM (Sso MCM) protein. The structure reveals single-hexameric ring-like architecture, at variance from the protein of Methanothermobacter thermoautotrophicus (Mth). Moreover, the central channel in Sso MCM seems significantly narrower than the Mth counterpart, which appears to more favorably accommodate single-stranded DNA than double-stranded DNA, as supported by DNA-binding assays. Structural analysis also highlights the essential role played by the zinc-binding domain in the interaction with nucleic acids and allows us to speculate that the Sso MCM N-ter domain may function as a molecular clamp to grasp the single-stranded DNA passing through the central channel. On this basis possible DNA unwinding mechanisms are discussed.

Simulations of electrophoretic RNA transport through transmembrane carbon nanotubes

The study of interactions between carbon nanotubes and cellular components, such as membranes and biomolecules, is fundamental for the rational design of nanodevices interfacing with biological systems. In this work, we use molecular dynamics simulations to study the electrophoretic transport of RNA through carbon nanotubes embedded in membranes. Decorated and naked carbon nanotubes are inserted into a dodecane membrane and a dimyristoylphosphatidylcholine lipid bilayer, and the system is subjected to electrostatic potential differences. The transport properties of this artificial pore are determined by the structural modifications of the membrane in the vicinity of the nanotube openings and they are quantified by the nonuniform electrostatic potential maps at the entrance and inside the nanotube. The pore is used to transport electrophoretically a short RNA segment and we find that the speed of translocation exhibits an exponential dependence on the applied potential differences. The RNA is transported while undergoing a repeated stacking and unstacking process, affected by steric interactions with the membrane headgroups and by hydrophobic interaction with the walls of the nanotube. The RNA is structurally reorganized inside the nanotube, with its backbone solvated by water molecules near the axis of the tube and its bases aligned with the nanotube walls. Upon exiting the pore, the RNA interacts with the membrane headgroups and remains attached to the dodecane membrane while it is expelled into the solvent in the case of the lipid bilayer. The results of the simulations detail processes of molecular transport into cellular compartments through manufactured nanopores and they are discussed in the context of applications in biotechnology and nanomedicine.

Stretching and unzipping nucleic acid hairpins using a synthetic nanopore

We have explored the electromechanical properties of DNA by using an electric field to force single hairpin molecules to translocate through a synthetic pore in a silicon nitride membrane. We observe a threshold voltage for translocation of the hairpin through the pore that depends sensitively on the diameter and the secondary structure of the DNA. The threshold for a diameter 1.5 < d < 2.3 nm is V > 1.5 V, which corresponds to the force required to stretch the stem of the hairpin, according to molecular dynamics simulations. On the other hand, for 1.0 < d < 1.5 nm, the threshold voltage collapses to V < 0.5 V because the stem unzips with a lower force than required for stretching. The data indicate that a synthetic nanopore can be used like a molecular gate to discriminate between the secondary structures in DNA.

Nanoscopic porous sensors

There are thousands of different nanometer-scale pores in biology, many of which act as sensors for specific chemical agents. Recent work suggests that protein and solid-state nanopores have many potential uses in a wide variety of analytical applications. In this review we survey this field of research and discuss the prospects for advances that could be made in the near future.

Computer modeling in biotechnology: a partner in development

Computational modeling can be a useful partner in biotechnology, in particular, in nanodevice engineering. Such modeling guides development through nanoscale views of biomolecules and devices not available through experimental imaging methods. We illustrate the role of computational modeling, mainly of molecular dynamics, through four case studies: development of silicon bionanodevices for single molecule electrical recording, development of carbon nano-tube-biomolecular systems as in vivo sensors, development of lipoprotein nanodiscs for assays of single membrane proteins, and engineering of oxygen tolerance into the enzyme hydrogenase for photosynthetic hydrogen gas production. The four case studies show how molecular dynamics approaches were adapted to the specific technical uses through (i) multi-scale extensions, (ii) fast quantum chemical force field evaluation, (iii) coarse graining, and (iv) novel sampling methods. The adapted molecular dynamics simulations provided key information on device behavior and revealed development opportunities, arguing that the "computational microscope" is an indispensable nanoengineering tool.

Reversible pH-controlled DNA-binding peptide nanotweezers: an in-silico study

We describe the molecular dynamics (MD)-aided engineering design of mutant peptides based on the α-helical coiled-coil GCN4 leucine zipper peptide (GCN4-p1) in order to obtain environmentally-responsive nanotweezers. The actuation mechanism of the nanotweezers depends on the modification of electrostatic charges on the residues along the length of the coiled coil. Modulating the solution pH between neutral and acidic values results in the reversible movement of helices toward and away from each other and creates a complete closed-open-closed transition cycle between the helices. Our results indicate that the mutants show a reversible opening of up to 15 Å (1.5 nm; approximately 150% of the initial separation) upon pH actuation. Investigation on the physicochemical phenomena that influence conformational properties, structural stability, and reversibility of the coiled-coil peptide-based nanotweezers revealed that a rationale- and design-based approach is needed to engineer stable peptide or macromolecules into stimuli-responsive devices. The efficacy of the mutant that demonstrated the most significant reversible actuation for environmentally responsive modulation of DNA-binding activity was also demonstrated. Our results have significant implications in bioseparations and in the engineering of novel transcription factors.

Detection of DNA sequences using an alternating electric field in a nanopore capacitor

Molecular dynamics simulations revealed that back-and-forth motion of DNA strands through a 1 nm diameter pore exhibits sequence-specific hysteresis that arises from the reorientation of the DNA bases in the nanopore constriction. Such hysteresis of the DNA motion results in detectable changes of the electrostatic potential at the electrodes of the nanopore capacitor and in a sequence-specific drift of the DNA strand under an oscillating transmembrane bias. A strategy is suggested for sequencing DNA in a nanopore using the electric field that alternates periodically in time.

Quantifying DNA-protein interactions by single molecule stretching

In this chapter, we discuss a new method for quantifying DNA-protein interactions. A single double-stranded DNA (dsDNA) molecule is stretched beyond its contour length, causing the base pairs to break while increasing the length from that of dsDNA to that of ssDNA. When applied in a solution containing DNA binding ligands, this method of force-induced DNA melting can be used to quantify the free energy of ligand binding, including the free energy of protein binding. The dependence of melting force on protein concentration is used to obtain the equilibrium binding constant of the ligand to DNA. We have applied this method to a well-studied DNA-binding protein, bacteriophage T4 gene 32 protein (gp32), and have obtained binding constants for the protein to single-stranded DNA (ssDNA) under a wide range of solution conditions. Our analysis of measurements conducted at several salt concentrations near physiological conditions indicates that a salt-dependent conformational change regulates DNA binding by gp32.

Can an atomic force microscope sequence DNA using a nanopore?

R. Bension has proposed that single molecules of DNA could be sequenced rapidly, in long sequential reads, by reading off the force required to pull a tightly fitting molecular ring over each base in turn using an atomic force microscope (AFM). We present molecular dynamics simulations that indicate that pulling DNA very rapidly (m/s) could generate large force peaks as each base is passed ( approximately 1 nN) with significant differences ( approximately 0.5 nN) between purine and pyrimidine. These speeds are six orders of magnitude faster than could be read out by a conventional AFM, and extending the calculations to accessible speeds using Kramers' theory shows that thermal fluctuations dominate the process with the result that purine and pyrimidine cannot be distinguished with the pulling speeds attained by current AFM technology.

Influence of the environment and probes on rapid DNA sequencing via transverse electronic transport

We study theoretically the feasibility of using transverse electronic transport within a nanopore for rapid DNA sequencing. Specifically, we examine the effects of the environment and detection probes on the distinguishability of the DNA bases. We find that the intrinsic measurement bandwidth of the electrodes helps the detection of single bases by averaging over the current distributions of each base. We also find that although the overall magnitude of the current may change dramatically with different detection conditions, the intrinsic distinguishability of the bases is not significantly affected by pore size and transverse field strength. The latter is the result of very effective stabilization of the DNA by the transverse field induced by the probes, so long as that field is much larger than the field that drives DNA through the pore. In addition, the ions and water together effectively screen the charge on the nucleotides, so that the electron states participating in the transport properties of the latter ones resemble those of the uncharged species. Finally, water in the environment has negligible direct influence on the transverse electrical current.

Exploring transmembrane transport through alpha-hemolysin with grid-steered molecular dynamics

The transport of biomolecules across cell boundaries is central to cellular function. While structures of many membrane channels are known, the permeation mechanism is known only for a select few. Molecular dynamics (MD) is a computational method that can provide an accurate description of permeation events at the atomic level, which is required for understanding the transport mechanism. However, due to the relatively short time scales accessible to this method, it is of limited utility. Here, we present a method for all-atom simulation of electric field-driven transport of large solutes through membrane channels, which in tens of nanoseconds can provide a realistic account of a permeation event that would require a millisecond simulation using conventional MD. In this method, the average distribution of the electrostatic potential in a membrane channel under a transmembrane bias of interest is determined first from an all-atom MD simulation. This electrostatic potential, defined on a grid, is subsequently applied to a charged solute to steer its permeation through the membrane channel. We apply this method to investigate permeation of DNA strands, DNA hairpins, and alpha-helical peptides through alpha-hemolysin. To test the accuracy of the method, we computed the relative permeation rates of DNA strands having different sequences and global orientations. The results of the G-SMD simulations were found to be in good agreement in experiment.

Progress toward ultrafast DNA sequencing using solid-state nanopores

BACKGROUND

Measurements of the ionic current flowing through nanometer-scale pores (nanopores) have been used to analyze single DNA and RNA molecules, with the ultimate goal of achieving ultrafast DNA sequencing. However, attempts at purely electronic measurements have not achieved the signal contrast required for single nucleotide differentiation. In this report we propose a novel method of optical detection of DNA sequence translocating through a nanopore.

METHODS

Each base of the target DNA sequence is 1st mapped onto a 2-unit code, 2 10-bp nucleotide sequence, by biochemical conversion into Designed DNA Polymers. These 2-unit codes are then hybridized to complementary, fluorescently labeled, and self-quenching molecular beacons. As the molecular beacons are sequentially unzipped during translocation through a <2-nm-wide nanopore, their fluorescent tags are unquenched and are detected by a custom-built dual-color total internal reflection fluorescence (TIRF) microscope. The 2-color optical signal is then correlated to the target DNA sequence.

RESULTS

A dual-color TIRFM microscope with single-molecule resolution was constructed, and controlled fabrication of 1-dimensional and 2-dimensional arrays of solid-state nanopores was performed. A nanofluidic cell assembly was constructed for TIRF-based optical detection of voltage-driven DNA translocation through a nanopore.

CONCLUSIONS

We present a novel nanopore-based DNA sequencing technique that uses an optical readout of DNA translocating unzipping through a nanopore. Our technique offers better single nucleotide differentiation in sequence readout, as well as the possibility of large-scale parallelism using nanopore arrays.

Real-time observations of single bacteriophage lambda DNA ejections in vitro

The physical, chemical, and structural features of bacteriophage genome release have been the subject of much recent attention. Many theoretical and experimental studies have centered on the internal forces driving the ejection process. Recently, Mangenot et al. [Mangenot S, Hochrein M, Rädler J, Letellier L (2005) Curr Biol 15:430-435.] reported fluorescence microscopy of phage T5 ejections, which proceeded stepwise between DNA nicks, reaching a translocation speed of 75 kbp/s or higher. It is still unknown how high the speed actually is. This paper reports real-time measurements of ejection from phage lambda, revealing how the speed depends on key physical parameters such as genome length and ionic state of the buffer. Except for a pause before DNA is finally released, the entire 48.5-kbp genome is translocated in approximately 1.5 s without interruption, reaching a speed of 60 kbp/s. The process gives insights particularly into the effects of two parameters: a shorter genome length results in lower speed but a shorter total time, and the presence of divalent magnesium ions (replacing sodium) reduces the pressure, increasing ejection time to 8-11 s. Pressure caused by DNA-DNA interactions within the head affects the initiation of ejection, but the close packing is also the dominant source of friction: more tightly packed phages initiate ejection earlier, but with a lower initial speed. The details of ejection revealed in this study are probably generic features of DNA translocation in bacteriophages and have implications for the dynamics of DNA in other biological systems.

Mechanism of DNA transport through pores

The transport of electrically charged macromolecules such as DNA through narrow pores is a fundamental process in life. When polymer molecules are forced to navigate through pores, their transport is controlled by entropic barriers that accompany their conformational changes. During the past decade, exciting results have emerged from single-molecule electrophysiology experiments. Specifically, the passage of single-stranded DNA/RNA through alpha-hemolysin pores and double-stranded DNA through solid-state nanopores has been investigated. By a combination of these results with the entropic barrier theory of polymer transport and macromolecular simulations, an understanding of the mechanism of DNA transport through pores has emerged.

Nanopore-based single-molecule DNA analysis

Nanopore-based DNA analysis is a single-molecule technique with revolutionary potential. It promises to carry out a range of analyses, orders of magnitude faster than current methods, including length measurement, specific sequence detection, single-molecule dynamics and even de novo sequencing. The concept involves using an applied voltage to drive DNA molecules through a narrow pore that separates chambers of electrolyte solution. This voltage also drives a flow of electrolyte ions through the pore, measured as an electric current. When molecules pass through the pore, they block the flow of ions and, thus, their structure and length can be determined based on the degree and duration of the resulting current reductions. In this review, I explain the nanopore-based DNA analysis concept and briefly explore its historical foundations, before discussing and summarizing all experimental results reported to date. I conclude with a summary of the obstacles that must be overcome for it to realize its promised potential.

Driven polymer transport through a nanopore controlled by a rotating electric field: off-lattice computer simulations

The driven translocation kinetics of a single strand polynucleotide chain through a nanopore is studied using off-lattice Monte Carlo simulations, by which the authors demonstrate a novel method in controlling the driven polymer transport through a nanopore by a rotating electric field. The recorded time series of blockade current from the driven polynucleotide transport are used to determine the sequence of polynucleotides by implementing a modified Monte Carlo algorithm, in which the energy landscape paving technique is incorporated to avoid trapping at deep local minima. It is found that only six-time series of block current are required to completely determine the polynucleotide sequence if the average missing rate (AMR) of current signals in these time series is smaller than 20%. For those time series with AMR greater than 20%, the error rate in sequencing an unknown polynucleotide decreases rapidly by increasing the number of time series. To find the most appropriate experimental conditions, the authors have investigated the dependence of AMR of current signals and qualified rate of measured time series of blockade current on various controllable experimental variables.

Detecting SNPs using a synthetic nanopore

We have discovered a voltage threshold for permeation through a synthetic nanopore of dsDNA bound to a restriction enzyme that depends on the sequence. Molecular dynamic simulations reveal that the threshold is associated with a nanonewton force required to rupture the DNA-protein complex. A single mutation in the recognition site for the restriction enzyme, i.e., a single nucleotide polymorphism (SNP), can easily be detected as a change in the threshold voltage. Consequently, by measuring the threshold voltage in a synthetic nanopore, it may be possible to discriminate between two variants of the same gene (alleles) that differ in one base.

Single molecule transcription profiling with AFM

Established techniques for global gene expression profiling, such as microarrays, face fundamental sensitivity constraints. Due to greatly increasing interest in examining minute samples from micro-dissected tissues, including single cells, unorthodox approaches, including molecular nanotechnologies, are being explored in this application. Here, we examine the use of single molecule, ordered restriction mapping, combined with AFM, to measure gene transcription levels from very low abundance samples. We frame the problem mathematically, using coding theory, and present an analysis of the critical error sources that may serve as a guide to designing future studies. We follow with experiments detailing the construction of high density, single molecule, ordered restriction maps from plasmids and from cDNA molecules, using two different enzymes, a result not previously reported. We discuss these results in the context of our calculations.

Mechanisms of DNA binding determined in optical tweezers experiments

The last decade has seen rapid development in single molecule manipulation of RNA and DNA. Measuring the response force for a particular manipulation has allowed the free energies of various nucleic acid structures and configurations to be determined. Optical tweezers represent a class of single molecule experiments that allows the energies and structural dynamics of DNA to be probed up to and beyond the transition from the double helix to its melted single strands. These experiments are capable of high force resolution over a wide dynamic range. Additionally, these investigations may be compared with results obtained when the nucleic acids are in the presence of proteins or other binding ligands. These ligands may bind into the major or minor groove of the double helix, intercalate between bases or associate with an already melted single strand of DNA. By varying solution conditions and the pulling dynamics, energetic and dynamic information may be deduced about the mechanisms of binding to nucleic acids, providing insight into the function of proteins and the utility of drug treatments.

Solid-state nanopores

The passage of individual molecules through nanosized pores in membranes is central to many processes in biology. Previously, experiments have been restricted to naturally occurring nanopores, but advances in technology now allow artificial solid-state nanopores to be fabricated in insulating membranes. By monitoring ion currents and forces as molecules pass through a solid-state nanopore, it is possible to investigate a wide range of phenomena involving DNA, RNA and proteins. The solid-state nanopore proves to be a surprisingly versatile new single-molecule tool for biophysics and biotechnology.

Counterion-hopping along the backbone of single-stranded DNA in nanometer pores: a mechanism for current conduction

Molecular dynamics calculations are performed to investigate ionic current conduction through nanopores in the presence of single-stranded DNA. We find the counterions to be strongly attracted to the phosphate groups of the DNA, with resident time on the order of nanoseconds, while coions are strongly excluded. The diffusion constant of the counterions is calculated and used to estimate the ionic current through the pore, which gives a similar magnitude as in experiment. The results suggest a counterion-hopping mechanism along the ssDNA backbone in the current conduction through nanopores.

Nanopore sequencing technology: nanopore preparations

For the past decade, nanometer-scale pores have been developed as a powerful technique for sensing biological macromolecules. Various potential applications using these nanopores have been reported at the proof-of-principle stage, with the eventual aim of using them as an alternative to de novo DNA sequencing. Currently, there have been two general approaches to prepare nanopores for nucleic acid analysis: organic nanopores, such as alpha-hemolysin pores, are commonly used for DNA analysis, whereas synthetic solid-state nanopores have also been developed using various conventional and non-conventional fabrication techniques. In particular, synthetic nanopores with pore sizes smaller than the alpha-hemolysin pores have been prepared, primarily by electron-beam-assisted techniques: these are more robust and have better dimensional adjustability. This review will examine current methods of nanopore preparation, ranging from organic pore preparations to recent developments in synthetic nanopore fabrications.

Developing synthetic conical nanopores for biosensing applications

In this review we bring together recent results from our group focused towards the development of biosensors from single conically-shaped artificial nanopores. The nanopores, used in the work presented here, were prepared using the track-etch process. The fabrication of track-etched conical nanopores has been optimized to allow for single nanopores with reproducible dimensions to be prepared. We have also demonstrated techniques that allow for easy and controllable manipulation of nanopore geometry (e.g., cone angle). We will consider the ion transport properties of the conical nanopores and factors that affect these properties. Methods for introducing functions that mimic biological ion channels, such as voltage-gating, into these nanopores will also be addressed. Three prototype sensors developed from single conical nanopores will be presented. In the first two sensors, the single conical nanopores function as resistive-pulse sensors and detect the presence of analytes as current-blockade events in the ion current. The third sensor functions in an on/off mode, much like a ligand-gated ion channel. In the presence of a target analyte, the ion current permanently shuts off.

Electrically tunable solid-state silicon nanopore ion filter

We show that a nanopore in a silicon membrane connected to a voltage source can be used as an electrically tunable ion filter. By applying a voltage between the heavily doped semiconductor and the electrolyte, it is possible to invert the ion population inside the nanopore and vary the conductance for both cations and anions in order to achieve selective conduction of ions even in the presence of significant surface charges in the membrane. Our model based on the solution of the Poisson equation and linear transport theory indicates that in narrow nanopores substantial gain can be achieved by controlling electrically the width of the charge double layer.

Multi-nanopore force spectroscopy for DNA analysis

The need for low-cost DNA sequence detection in clinical applications is driving development of new technologies. We demonstrate a method for detection of mutations in a DNA sequence purely by electronic means, and without need for fluorescent labeling. Our method uses an array of nanopores to perform synchronized single-molecule force spectroscopy measurements over many molecules in parallel, yielding detailed information on the kinetics of hundreds of molecule dissociations in a single measurement.

Nanopore sequencing technology: research trends and applications

Nanopore sequencing is one of the most promising technologies being developed as a cheap and fast alternative to the conventional Sanger sequencing method. Protein or synthetic nanopores have been used to detect DNA or RNA molecules. Although none of the technologies to date has shown single-base resolution for de novo DNA sequencing, there have been several reports of alpha-hemolysin protein nanopores being used for basic DNA analyses, and various synthetic nanopores have been fabricated. This review will examine current nanopore sequencing technologies, including recent developments of new applications.

Fast DNA sequencing via transverse electronic transport

A rapid and low-cost method to sequence DNA would usher in a revolution in medicine. We propose and theoretically show the feasibility of a protocol for sequencing based on the distributions of transverse electrical currents of single-stranded DNA while it translocates through a nanopore. Our estimates, based on the statistics of these distributions, reveal that sequencing of an entire human genome could be done with very high accuracy in a matter of hours without parallelization, that is, orders of magnitude faster than present techniques. The practical implementation of our approach would represent a substantial advancement in our ability to study, predict, and cure diseases from the perspective of the genetic makeup of each individual.

The role of molecular modeling in bionanotechnology

Molecular modeling is advocated here as a key methodology for research and development in bionanotechnology. Molecular modeling provides nanoscale images at atomic and even electronic resolution, predicts the nanoscale interaction of unfamiliar combinations of biological and inorganic materials, and evaluates strategies for redesigning biopolymers for nanotechnological uses. The methodology is illustrated in this paper through reviewing three case studies. The first one involves the use of single-walled carbon nanotubes as biomedical sensors where a computationally efficient, yet accurate, description of the influence of biomolecules on nanotube electronic properties through nanotube-biomolecule interactions was developed; this development furnishes the ability to test nanotube electronic properties in realistic biological environments. The second case study involves the use of nanopores manufactured into electronic nanodevices based on silicon compounds for single molecule electrical recording, in particular, for DNA sequencing. Here, modeling combining classical molecular dynamics, material science and device physics, described the interaction of biopolymers, e.g., DNA, with silicon nitrate and silicon oxide pores, furnished accurate dynamic images of pore translocation processes, and predicted signals. The third case study involves the development of nanoscale lipid bilayers for the study of embedded membrane proteins and cholesterol. Molecular modeling tested scaffold proteins, redesigned apolipoproteins found in mammalian plasma that hold the discoidal membranes in the proper shape, and predicted the assembly as well as final structure of the nanodiscs. In entirely new technological areas such as bionanotechnology, qualitative concepts, pictures and suggestions are sorely needed; these three case studies document that molecular modeling can serve a critical role in this respect, even though it may still fall short on quantitative precision.