Antifouling membrane surface construction: Chemistry plays a critical role

Biomimetic Nanomembranes: An Overview

Nanomembranes are the principal building block of basically all living organisms, and without them life as we know it would not be possible. Yet in spite of their ubiquity, for a long time their artificial counterparts have mostly been overlooked in mainstream microsystem and nanosystem technologies, being a niche topic at best, instead of holding their rightful position as one of the basic structures in such systems. Synthetic biomimetic nanomembranes are essential in a vast number of seemingly disparate fields, including separation science and technology, sensing technology, environmental protection, renewable energy, process industry, life sciences and biomedicine. In this study, we review the possibilities for the synthesis of inorganic, organic and hybrid nanomembranes mimicking and in some way surpassing living structures, consider their main properties of interest, give a short overview of possible pathways for their enhancement through multifunctionalization, and summarize some of their numerous applications reported to date, with a focus on recent findings. It is our aim to stress the role of functionalized synthetic biomimetic nanomembranes within the context of modern nanoscience and nanotechnologies. We hope to highlight the importance of the topic, as well as to stress its great applicability potentials in many facets of human life.

Ceramic nanocomposite membranes and membrane fouling: A review

Membrane technologies have broad applications in the removal of contaminants from drinking water and wastewater. In recent decades, ceramic membrane has made rapid progress in industrial/municipal wastewater treatment and drinking water treatment owing to their advantageous properties over conventional polymeric membrane. The beneficial characteristics of ceramic membranes include fouling resistance, high permeability, good recoverability, chemical stability, and long life time, which have found applications with the recent innovations in both fabrication methods and nanotechnology. Therefore, ceramic membranes hold great promise for potential applications in water treatment. This paper mainly reviews the progress in the research and development of ceramic membranes, with key focus on porous ceramic membranes and nanomaterial-functionalized ceramic membranes for nanofiltration or catalysis. The current state of the available ceramic membranes in industry and academia, and their potential advantages, limitations and applications are reviewed. The last section of the review focuses on ceramic membrane fouling and the efforts towards ceramic membrane fouling mitigation. The advances in ceramic membrane technologies have rarely been widely reviewed before, therefore, this review could be served as a guide for the new entrants to the field, as well to the established researchers.

Permanent Antimicrobial Poly(vinylidene fluoride) Prepared by Chemical Bonding with Poly(hexamethylene guanidine)

Biofouling is one of the major obstacles in the application of poly(vinylidene fluoride) (PVDF) membrane in water and wastewater treatment. Developing antimicrobial PVDF could kill the attached microbe in the initial stage, thus theoretically inhibiting the formation of biofilm and delaying the occurrence of biofouling. However, the leaching of the antimicrobial component and deterioration of antimicrobial properties remain a concern. In this work, an antimicrobial PVDF (PVDF-g-AGE-PHMG) was developed by chemical bonding PVDF with poly(hexamethylene guanidine hydrochloride) (PHMG). The obtained PVDF-g-AGE-PHMG was blended with pristine PVDF to prepare an antimicrobial PVDF membrane. The results of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) confirmed that PHMG was successfully grafted into the PVDF membrane. The morphologies, membrane porosity, water contact angles, antimicrobial properties, mechanical properties, and thermostability of the as-prepared membranes were investigated. When the content of PVDF-g-AGE-PHMG reached 10.0 wt %, the inhibition rates of both antimicrobial PVDF membrane against Escherichia coli and Staphylococcus aureus were above 99.99%. Due to the increased hydrophilicity, excellent antimicrobial activity, nonleaching of antimicrobial component, good mechanical properties, and thermostability, the as-prepared PVDF membrane has promising applications in the field of water treatment.

One-Step Preparation of Antifouling Polysulfone Ultrafiltration Membranes via Modification by a Cationic Polyelectrolyte Based on Polyacrylamide

A novel method for one-step preparation of antifouling ultrafiltration membranes via a non-solvent induced phase separation (NIPS) technique is proposed. It involves using aqueous 0.05-0.3 wt.% solutions of cationic polyelectrolyte based on a copolymer of acrylamide and 2-acryloxyethyltrimethylammonium chloride (Praestol 859) as a coagulant in NIPS. A systematic study of the effect of the cationic polyelectrolyte addition to the coagulant on the structure, performance and antifouling stability of polysulfone membranes was carried out. The methods for membrane characterization involved scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), contact angle and zeta-potential measurements and evaluation of the permeability, rejection and antifouling performance in human serum albumin solution and surface water ultrafiltration. It was revealed that in the presence of cationic polyelectrolyte in the coagulation bath, its concentration has a major influence on the rate of "solvent-non-solvent" exchange and thus also on the rate of phase separation which significantly affects membrane structure. The immobilization of cationic polyelectrolyte macromolecules into the selective layer was confirmed by FTIR spectroscopy. It was revealed that polyelectrolyte macromolecules predominately immobilize on the surface of the selective layer and not on the bottom layer. Membrane modification was found to improve the hydrophilicity of the selective layer, to increase surface roughness and to change zeta-potential which yields the substantial improvement of membrane antifouling stability toward natural organic matter and human serum albumin.

Efficient natural organic matter removal from water using nano-MgO coupled with microfiltration membrane separation

Excess natural organic matter (NOM) in water not only lead to unpleasant black color and dissolved oxygen depletion in wastewater and natural water body but also causes carcinogenic chlorinated organic byproduct during drinking water chlorine disinfection. We try to develop a novel cost-effective and green technology for water NOM removal. In our simulated NOM removal process using humic acid (HA) as typical organic matter, we find that mesoporous nano-MgO performs an abnormally high NOM removal capacity (1260 mg-HA/g-MgO, or 446 mgC/g-MgO) when coupled with microfiltration membrane separation, which can't be illustrated by traditional adsorption mechanism. Actually, Mg²⁺ from dissolved Mg(OH)₂ contributes ∼ 92% NOM removal via coagulation while Mg(OH)₂ is responsible for the residue ∼ 8% via adsorption. MgO serves as a two-in-one coagulant and adsorbent. The MgO treatment process is highly pH sensitive and weak acidic condition is favored for high NOM removal efficiency. MgO can be regenerated for more than 10 circulations by annealing Mg(OH)₂/Mg-NOM composite at 500 °C, so that our MgO recycling process will be sustainable without the need of continuous chemical purchase. More importantly, no solid waste is generated in this novel process. This MgO-recycling NOM-removal process is simple, efficient, and sustainable for water NOM removal and will be significant in promoting novel sustainable technologies for NOM- or HA-related water remediation and treatment while minimizing the generation of solid waste.

The Influence of Graphene Addition on the Properties of Composite rGO/PAN Membranes and Their Potential Application for Water Disinfection

The paper presents a method of obtaining composite polyacrylonitrile-based (PAN) membranes with the addition of reduced graphene oxide (rGO). The membranes were obtained using phase inversion method from a homogeneous rGO dispersion in a solution of PAN dissolved in N, N-dimethylformamide (DMF). The impact of the amount of rGO addition to the PAN matrix on the physicochemical, structural, transport, and separation properties and on fouling resistance was studied. Composite membranes, due to the method of preparation used and the addition of rGO, are characterized by very good transport properties (~390 L/m2 h) and by a high degree of protein retention (85%). Reduced graphene oxide has biocidal properties, which, as we have shown, depend on the size of nanoparticles and the type of microorganism. rGO/PAN membranes, on the other hand, show biostatic properties against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcuc aureus) and fungi (Candida albicans). Thus, the obtained composite membranes can be potentially used in water disinfection.

Fabrication of hierarchical layer-by-layer membrane as the photocatalytic degradation of foulants and effective mitigation of membrane fouling for wastewater treatment

A polyvinylidene fluoride plate sheet membrane coated 3D TiO₂/poly (sodium styrenesulfonate) (PSS) photocatalyst layers were fabricated via dip-coating layer-by-layer (LbL) assembly. Cationic TiO₂ and anionic PSS were alternately stacked on the support membrane via electrostatic interactions. The obtained modified membrane with (TiO₂/PSS)₇ exhibited optimal versatility under ultraviolet light irradiation in both dead-end and membrane reactor, which showed superior Lanasol Blue 3R (LB) removal rate to membrane filtration and biodegradation. The modified membranes (MM) exhibited good performance in terms of photocatalytic activity of foulant degradation and mitigation of membrane fouling in a membrane reactor. The obtained MM with (TiO₂/PSS)₇ exhibited optimal versatility under ultraviolet light irradiation in both dead-end and membrane reactors and superior Lanasol Blue 3R removal rate in membrane filtration and biodegradation. The MM (TiO₂/PSS)₇ possessed excellent antifouling properties by using bovine serum albumin (BSA), as evidenced by the extended Derjaguin-Landau-Verwey-Overbeek theory. Additionally, the TiO₂/PSS membrane showed good self-cleaning ability, and the foulants on the membrane surface could be degraded using ultraviolet light irradiation.

Preparation of a novel zwitterionic striped surface thin-film composite nanofiltration membrane with excellent salt separation performance and antifouling property

Thin-film composite (TFC) nanofiltration (NF) membranes were fabricated via the co-deposition of taurine, tannic acid (TA), and polyethyleneimine (PEI), followed by subsequent interfacial polymerization with trimesoyl chloride (TMC) on the surface of the polysulfone ultrafiltration substrates. The surface properties, including the roughness, hydrophilicity, surface potential, and NF performances were facilely tuned by varying the taurine content for the prepared TFC membranes. In addition, the as-prepared TFC NF membranes had an excellent antifouling property and flux recovery ratio (FRR) in humic acid (HA), bovine serum albumin (BSA) and sodium alginate (SA) filtration tests. These results also revealed that the taurine content controlled the formation of the striped surface. Thus, this work provided a viable strategy for fabricating TFC NF membranes with high selectivity and outstanding antifouling ability.

Thin-film composite (TFC) nanofiltration (NF) membranes with zwitterionic striped surface were fabricated via the co-deposition and interfacial polymerization.

Synergy of biofuel production with waste remediation along with value-added co-products recovery through microalgae cultivation: A review of membrane-integrated green approach

Development of advanced biofuels such as bioethanol and biodiesel from renewable resources is critical for the earth's sustainable management and to slow down the global climate change by partial replacement of gasoline and diesel in the transport sector. Being a diverse group of aquatic micro-organisms, algae are the most prominent resources on the planet, distributed in an aquatic system, a potential source of bioenergy, biomass and secondary metabolites. Microalgae-based biofuel production is widely accepted as non-food fuel sources and better choice for achieving goals of incorporation of a clean fuel source into the transportation sector. The present review article provides a comprehensive literature survey as well as a novel approach on the application of microalgae for their simultaneous cultivation and bioremediation of high nutrient containing wastewater. In addition to that, merits and demerits of different existing conventional techniques for microalgae culture reactors, harvesting of algal biomass, oil recovery, use of different catalysts for transesterification reactions and other by-products recovery have been discussed and compared with the membrane-based system to find out the best optimal conditions for higher biomass as well as lipid yield. This article also deals with the use of a tailor-made membrane in an appropriate module that can be used in upstream and downstream processes during algal-based biofuels production. Such membrane-integrated system has the potential of low-cost and eco-friendly separation, purification and concentration enrichment of biodiesel as well as other valuable algal by-products which can bring the high degree of process intensification for scale-up at the industrial stage.

Hierarchically Assembled Graphene Oxide Composite Membrane with Self-Healing and High-Efficiency Water Purification Performance

Graphene oxide (GO) with a two-dimensional lamellar structure and single-atom thickness has exhibited advantages in water purification by stacking to a continuous membrane. However, a proper method to further increase the separation property of the GO membrane is still urgently needed. Besides, damage to the membrane during the full-scale application processes and the resulted consequential loss are prevalent problems need to be solved. Here, a hierarchically assembled GO composite membrane was developed that can achieve high-efficiency water purification performance and self-healing property via the synergistic effect of the metal-organic framework (MOF) and the coated hydrophilic layer of chitosan. The intercalated MOF effectively expanded the channel space of GO and endowed the channels with molecular-sieving property. Meanwhile, the coated chitosan layer can selectively adsorb water and achieve self-healing through the cross-linking reaction. The prepared GO composite membrane shows largely improved water flux (14.62 L m^-2 h^-1 bar^-1), increased 344% than the water flux of the GO membrane, high rejection ratio (>99% for dyes), and good antifouling performance. In addition, the damaged GO composite membrane can recover its water flux (95%) and rejection ratio (96%) through a facile self-healing process.

A Stable Anti-Fouling Coating on PVDF Membrane Constructed of Polyphenol Tannic Acid, Polyethyleneimine and Metal Ion

A hydrophilic and anti-fouling coating layer was constructed on a polyvinylidene fluoride (PVDF) microfiltration membrane by a novel surface modification method. The pristine membrane was firstly coated by (3-chloropropyl) trimethoxysilane/polyethyleneimine and tannic acid. Then, the metal ion was induced on the coating layer to coordinate with tannic acid and polyethyleneimine, forming a more stable and hydrophilic coating on the surface. The membrane's surface morphology and chemical element analysis showed that the Tannic acid/ polyethyleneimine (TA/PEI) coating layer was denser and had more stability after the addition of metal ions, and this may be due to the coordination bond formed between the TA/PEI coating and metal ions. The results of the water contact angle and pure water flux measurements showed that the hydrophilicity and wettability of the modified membranes were improved obviously after introducing the metal ion layers. The anti-fouling performance and stability of the modified membrane were also characterized by the underwater oil contact angle (OCA), the separation efficiency, and the contact angle variation value for before and after the rinsing experiment. The modified membrane showed obvious stability and antifouling. Moreover, the retention rate of some composite membranes could reach 99.6%.

Construction of Antifouling Membrane Surfaces through Layer-by-Layer Self-Assembly of Lignosulfonate and Polyethyleneimine

Lignin is the second most abundant and low-cost natural polymer, but its high value-added utilization is still lack of effective and economic ways. In this paper, waste lignosulfonate (LS) was introduced to fabricate antifouling membrane surfaces via layer-by-layer self-assembly with polyethyleneimine (PEI). The LS/PEI multilayers were successfully deposited on the polysulfone (PSf) membrane, as demonstrated by ATR-FTIR, XPS, Zeta potential measurements, AFM, and SEM. Meanwhile, the effect of the number of bilayers was investigated in detail on the composition, morphologies, hydrophilicity, and antifouling performance of the membrane surface. As a result, with the bilayer numbers increase to 5, the PSf membrane shows smooth surface with small roughness, and its water contact angle reduces to 44.1°, indicating the improved hydrophilicity. Accordingly, the modified PSf membrane with 5 LS/PEI bilayers repels the adsorption of protein, resulting in good antifouling performance. This work provides a green, facile, and low-cost strategy to construct antifouling membrane surfaces.

Bioinspired EVAL membrane modified with cilia-like structures showing simultaneously enhanced permeability and antifouling properties

A simple and effective strategy to simultaneously enhance the permeability and antifouling properties of ethylene vinyl alcohol (EVAL) membrane was developed based on the bioinspired natural cleaner, cilia. Taking clue from the self-cleaning effect of cilia, supramolecular polyrotaxanes (PRs) with sliding and rotating cyclic molecules along linear chains were synthesized using azide-alkyne click chemistry. Cilia-like PRs were incorporated into EVAL matrix in the fabrication of modified EVAL membranes. Cilia-like structures protruding from the membrane surface have been observed by SEM, TEM and AFM. By imitating natural ciliary movements, these structures provided a proactive self-cleaning system to remove the foulants. The introduction of cilia-like PRs enhanced the surface roughness and hydrophilicity, and significantly enhanced permeability by 55.3% compared to raw EVAL membrane. Moreover, the membrane modified with cilia-like PRs showed an excellent antifouling property with a lower water flux decline (12.6%) and higher water flux recovery (94%) in dynamic fouling tests. Furthermore, this modified membrane develops the scope of bioinspired membranes, inspiring more attractive potential applications in self-cleaning materials, dynamic membranes and supramolecular machines.

Novel chitosan based thin sheet nanofiltration membrane for rejection of heavy metal chromium

In recent years, polymeric membranes holds superior position in filtration processes as it was cost effective and simple to prepare. In the present study we have synthesized a novel organic-inorganic hybrid thin sheet membrane using chitosan/polyvinyl alcohol and montmorillonite clay followed by non-solvent induced phase inversion technique. This hybrid clay-polymeric nanofiltration membrane possesses excellent overall performance, such as enhanced hydrophilic nature, and holds good rejection rate. Analytical techniques such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD) and Scanning Electron Microscopy (SEM) have been employed to characterize the membrane material. Membrane characterizations such as pure water flux, membrane hydraulic resistance, water content, percentage of porosity and pore size were also evaluated. An important characteristic of membrane for long term usage "anti-biofouling activity" is investigated by determining zone of inhibition of membrane on pathogens of bacterial and fungal strains. The remediation of chromium was performed by varying the parameters such as pH, metal ion concentration, applied pressure and thickness of membrane. The rejection of chromium removal by CS/PVA/MMT membrane is confirmed by comparing the spectral images of EDAX and FT-IR taken before and after filtration.

Supramolecular-Based Regenerable Coating Layer of a Thin-Film Composite Nanofiltration Membrane for Simultaneously Enhanced Desalination and Antifouling Properties

A high-performance nanofiltration (NF) membrane with simultaneously improved desalination and antifouling properties while maintaining regeneration ability is highly desirable in water treatment. Surface modification is an effective approach to enhance the performance of NF membranes. In the present study, a multifunctional thin-film composite NF membrane (Fe-TFC) was fabricated via coating a regenerable ferric ion-tannic acid (Fe^III-TA) layer on the nascent polyamide membrane surface. The Fe-TFC membrane exhibited enhanced hydrophilicity, smaller pore size, and lower negative charge compared with the control membrane. The salt rejections and selectivity of divalent to monovalent ions were greatly improved with only a slight decrease in water permeability due to the presence of the coating layer. Meanwhile, dynamic fouling tests with humic acid demonstrated that the Fe-TFC membrane possessed an enhanced antifouling property and excellent flux recovery rate. After coating, the normalized water flux and flux recovery of the Fe-TFC membrane increased from 0.02 to 0.26 and 32.1 to 76.4% at the end of five cycles of fouling tests, respectively. In addition, the resultant membrane exhibited excellent durability and stability under harsh conditions for ∼10 days. Interestingly, the fouled coating layer can be easily removed by HCl cleaning and regenerated through an in situ strategy. Consequently, the regenerated membranes presented stable antifouling properties and desalination performance after several times of regeneration. It was demonstrated that the unique feature of Fe^III-TA networks enables the coating layer to act as a protective layer for the underlying polyamide membrane, leading to the high performance of the composite membrane. This study provides a new insight for surface functionalization and easy regeneration of the TFC nanofiltration membrane in water treatment technology.

Biofouling-Resistant Porous Membranes with a Precisely Adjustable Pore Diameter via 3D Polymer Grafting

A facile route to biofouling-resistant porous thin-film membranes that can be fine-tuned for specific needs in diverse bioseparation, mass flow control, sensors, and drug delivery applications is reported. The proposed approach is based on combining two distinct macromolecular systems-a cross-linked poly(2-vinyl pyridine) network and a 3D-grafted polyethylene oxide (PEO) layer-in one robust porous material whose porosity can be adjusted within a wide range, covering the macroporous and mesoporous size regimes. Notably, this reconfigurable material maintains its antifouling properties throughout the entire range of pore size configurations because of a dense surface carpet of PEO chains with self-healing properties that are immobilized both onto the surface and inside the polymer network through what was termed 3D grafting. Experimental results are supplemented by computer simulations of a coarse-grained model of a porous membrane that shows qualitatively similar pore swelling behavior.

Biomimetic dynamic membrane for aquatic dye removal

This study utilized physical adsorption and filtration of carbon nanotubes (CNTs) and laccases to fabricate biomimetic dynamic membrane (BDM) for the advanced treatment of dye wastewater. In BDM, the adsorption, enzymatic degradation and membrane separation demonstrated a synergism effect on pollutant removal. At first, the fabrication methods of BDM were investigated, and the mixed filtration for laccases and CNTs showed a better performance than the stepwise filtration. Furthermore, the operation parameters of BDM, including CNTs and laccase loading amounts, dye concentration, agitation speed and transmembrane pressure (TMP), were studied. Suitable CNTs and laccase amounts could reduce filtration resistance and increase catalysis efficiency, while moderate TMP and agitation speed were in favor of boosting the BDM structure for catalysis and permeability. Optimized operation parameters (CNT loading amount = 20 g m^-2, laccase loading amount = 74.6 g m^-2, agitation speed = 100 rpm, and TMP = 1.0 bar) sustained a high removal rate, and the flux was over 120 L m^-2 h^-1, even for 7 operation cycle' tests. BDM exhibited an excellent dye removal rate, stable flux and great antifouling capacity, on the ground that adsorption saturation and foulant may be alleviated "online and in-situ" by the enzymatic degradation. Afterwards, the bionic layer on BDM, after absorption saturation and catalyst deactivation, could be eliminated rapidly by carrying out a simple backwash cleaning operation, then a new one could be fabricated immediately. Therefore, BDM is a good candidate for functional membrane materials in future water treatment.

Silicic Acid-Mediated Formation of Tannic Acid Nanocoatings

Tannic acid (TA) adheres to a broad variety of different materials and forms versatile surface coatings for technical and biological applications. In mild alkaline conditions, autoxidation processes occur and a firm monolayer is formed. Up to now, thicker coatings are obtained in only a cross-linked multilayer fashion. This study presents an alternative method to form continuous TA coatings using orthosilicic acid (Si_aq). Adsorption kinetics and physical properties of TA coatings in the presence of Si_aq were determined using a quartz-crystal microbalance and nanoplasmonic spectroscopy. An in situ TA layer thickness of 200 nm was obtained after 24 h in solutions supplemented with 80 μM Si_aq. Dry-state measurements indicated a highly hydrated layer in situ. Furthermore, chemical analysis by Fourier transform infrared spectroscopy revealed possible complexation of TA by Si_aq, whereas UV-vis spectroscopy did not indicate an interaction of Si_aq in the autoxidation process of TA. Investigation of additional metalloid ions showed that germanic acid was also able to initiate a continuous coating formation of TA, whereas boric acid prevented the polymerization process. In comparison to that of TA, the coating formation of pyrogallol (PG) and gallic acid (GA) was not affected by Si_aq. PG formed continuous coatings also without Si_aq, whereas GA formed only a monolayer in the presence of Si_aq. However, Si_aq induced a continuous layer formation of ellagic acid. These results indicate the specific importance of orthosilicic acid in the coating formation of polyphenolic molecules with multiple ortho-dihydroxy groups and open new possibilities to deposit TA on interfaces.

Mussel-Inspired Surface Functionalization of PET with Zwitterions and Silver Nanoparticles for the Dual-Enhanced Antifouling and Antibacterial Properties

Herein, we designed and constructed a dual functional surface with antimicrobial and antifouling abilities to prevent protein and bacterial attachment that are significant challenges in biomedical devices. Primary amino-group-capped sulfobetaine of DMMSA was synthesized and then grafted onto polydopamine pretreated PET sheets via click chemistry. The sheets were subsequently immersed into silver ion solution, in which the absorbed silver ions were reduced to silver nanoparticles (AgNPs) in situ by a polydopamine layer. The antifouling assays demonstrated that the resultant PET/DMMSA/AgNPs sheets exhibited great antifouling performances against bovine serum albumin (BSA), bovine fibrinogen (BFG), platelets, and bacteria, the critical proteins/microorganisms leading to implant failure. The antibacterial data suggested that the sheets had dual functions as inhibitors of bacterial growth and bactericide and could efficiently delay the biofilm formation. This repelling and killing approach is green and simple, with potential biomedical applications.

Dye Degrading and Fouling-Resistant Membranes Formed by Deposition with Ternary Nanocomposites of N-Doped Graphene/TiO₂/Activated Carbon

A ternary nanocomposite consisting of N-doped graphene (NGR)/TiO₂/activated carbon (NGRT@AC) was prepared, and the components' synergetic effect on dye degradation was investigated after deposition on the surface of a polysulfone membrane (PSF). As far as we know, this ternary composite catalyst has never previously been used to degrade dyes nor been used as a functional layer for separation membranes. The surface morphology and structure of the as-prepared membranes were analyzed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The NGRT@AC-modified PSF membrane (NGRT@AC-PSF) presents excellent photodegradation efficiency to methyl orange (MO) under both UV (95.2%) and sunlight (78.1%) irradiation, much higher than those values of PSF, TiO₂- modified PSF (TiO₂-PSF), and N-doped graphene/TiO₂ (NGRT)-modified PSF membranes (NGRT-PSF) under the same conditions. The high flux recovery ratio (95.5%) demonstrates that the NGRT@AC-PSF membrane shows improved antifouling performance. The photocatalytic results prove that surface deposition method (95.2%) was better than the blending method (31.1%) for forming high-performance membranes. Therefore, the NGRT@AC-PSF membrane has the potential for broad applications in dye degradation to treat waste water from textile industries.

Tailor-made high-performance reverse osmosis membranes by surface fixation of hydrophilic macromolecules for wastewater treatment

Polyamide aromatic (PA) reverse osmosis (RO) membranes are currently the most important materials in the seawater desalination and wastewater treatment industry. This study used hydrophilic macromolecular polyvinylpyrrolidone (PVP) in a PA selective layer to develop a new polyamide thin-film composite (TFC), namely PA-g-PVP RO, which will be used for water treatment. The TFC is prepared via an interfacial polymerisation process, and TFC-based PVP can be transplanted on a PA surface by radiation. PA-g-PVP RO was characterised by ATR-FTIR, SEM, XPS, AFM and contact angle test and then evaluated by determining its permeability, salt retention and antifouling performance, among other properties. Results show that the chemical composition and surface morphology of the polyamide film significantly changed. A PVP brush grafted on an RO membrane surface significantly enhanced the hydrophilicity and antifouling performance of the membrane. When the PVP concentration was increased in an aqueous solution to 2%, the water contact angle of the sacrificial layer of the modified membrane decreased to 24.3°, the fouling recovery ratio to 93.4% and the salt retention increased to 99.5% at a small flux change. This combined technology can also be used for other macromolecules to modify the membrane and study the preparation and modification of ultra-filtration and nano-filtration membranes.

Polyamide aromatic (PA) reverse osmosis (RO) membranes are currently the most important materials in the seawater desalination and wastewater treatment industry.