Control over differentiation of a metastable supramolecular assembly in one and two dimensions

Molecular self-assembly under kinetic control is expected to yield nanostructures that are inaccessible through the spontaneous thermodynamic process. Moreover, time-dependent evolution, which is reminiscent of biomolecular systems, may occur under such out-of-equilibrium conditions, allowing the synthesis of supramolecular assemblies with enhanced complexities. Here we report on the capacity of a metastable porphyrin supramolecular assembly to differentiate into nanofibre and nanosheet structures. Mechanistic studies of the relationship between the molecular design and pathway complexity in the self-assembly unveiled the energy landscape that governs the unique kinetic behaviour. Based on this understanding, we could control the differentiation phenomena and achieve both one- and two-dimensional living supramolecular polymerization using an identical monomer. Furthermore, we found that the obtained nanostructures are electronically distinct, which illustrates the pathway-dependent material properties.

3D DNA Origami Cuboids as Monodisperse Patchy Nanoparticles for Switchable Hierarchical Self-Assembly

The rational design of anisotropic interaction patterns is a key step for programming colloid and nanoparticle self-assembly and emergent functions. Herein, we demonstrate a concept for harnessing the capabilities of 3D DNA origami for extensive supracolloidal self-assembly and showcase its use for making truly monodisperse, patchy, divalent nanocuboids that can self-assemble into supracolloidal fibrils via programmable DNA hybridization. A change in the number of connector duplexes at the patches reveals that multivalency and cooperativity play crucial roles to enhance superstructure formation. We further show thermal and chemical switching of the superstructures as the first steps toward reconfigurable self-assemblies. This concept lays the groundwork for merging monodisperse 3D DNA origami, featuring programmable patchiness and interactions, with nanoparticle self-assembly.

Bottom-Up Meets Top-Down: Patchy Hybrid Nonwovens as an Efficient Catalysis Platform

Heterogeneous catalysis with supported nanoparticles (NPs) is a highly active field of research. However, the efficient stabilization of NPs without deteriorating their catalytic activity is challenging. By combining top-down (coaxial electrospinning) and bottom-up (crystallization-driven self-assembly) approaches, we prepared patchy nonwovens with functional, nanometer-sized patches on the surface. These patches can selectively bind and efficiently stabilize gold nanoparticles (AuNPs). The use of these AuNP-loaded patchy nonwovens in the alcoholysis of dimethylphenylsilane led to full conversion under comparably mild conditions and in short reaction times. The absence of gold leaching or a slowing down of the reaction even after ten subsequent cycles manifests the excellent reusability of this catalyst system. The flexibility of the presented approach allows for easy transfer to other nonwoven supports and catalytically active NPs, which promises broad applicability.

Cross-linked cationic diblock copolymer worms are superflocculants for micrometer-sized silica particles

A series of linear cationic diblock copolymer nanoparticles are prepared by polymerization-induced self-assembly (PISA) via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of 2-hydroxypropyl methacrylate (HPMA) using a binary mixture of non-ionic and cationic macromolecular RAFT agents, namely poly(ethylene oxide) (PEO113, Mn = 4400 g mol-1; Mw/Mn = 1.08) and poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride) (PQDMA125, Mn = 31 800 g mol-1, Mw/Mn = 1.19). A detailed phase diagram was constructed to determine the maximum amount of PQDMA125 stabilizer block that could be incorporated while still allowing access to a pure worm copolymer morphology. Aqueous electrophoresis studies indicated that zeta potentials of +35 mV could be achieved for such cationic worms over a wide pH range. Core cross-linked worms were prepared via statistical copolymerization of glycidyl methacrylate (GlyMA) with HPMA using a slightly modified PISA formulation, followed by reacting the epoxy groups of the GlyMA residues located within the worm cores with 3-aminopropyl triethoxysilane (APTES), and concomitant hydrolysis/condensation of the pendent silanol groups with the secondary alcohol on the HPMA residues. TEM and DLS studies confirmed that such core cross-linked cationic worms remained colloidally stable when challenged with either excess methanol or a cationic surfactant. These cross-linked cationic worms are shown to be much more effective bridging flocculants for 1.0 μm silica particles at pH 9 than the corresponding linear cationic worms (and also various commercial high molecular weight water-soluble polymers.). Laser diffraction studies indicated silica aggregates of around 25-28 μm diameter when using the former worms but only 3-5 μm diameter when employing the latter worms. Moreover, SEM studies confirmed that the cross-linked worms remained intact after their adsorption onto the silica particles, whereas the much more delicate linear worms underwent fragmentation under the same conditions. Similar results were obtained with 4 μm silica particles.

3D Structures of Responsive Nanocompartmentalized Microgels

Compartmentalization in soft matter is important for segregating and coordinating chemical reactions, sequestering (re)active components, and integrating multifunctionality. Advances depend crucially on quantitative 3D visualization in situ with high spatiotemporal resolution. Here, we show the direct visualization of different compartments within adaptive microgels using a combination of in situ electron and super-resolved fluorescence microscopy. We unravel new levels of structural details and address the challenge of reconstructing 3D information from 2D projections for nonuniform soft matter as opposed to monodisperse proteins. Moreover, we visualize the thermally induced shrinkage of responsive core-shell microgels live in water. This strategy opens doors for systematic in situ studies of soft matter systems and their application as smart materials.

Photoregulated Living Supramolecular Polymerization Established by Combining Energy Landscapes of Photoisomerization and Nucleation-Elongation Processes

The significant contribution of conventional living polymerization to polymer science assures that living supramolecular polymerization will also lead to a variety of novel phenomena and applications. However, the monomer scope still remains limited in terms of the self-assembly energy landscape; a kinetic trap that retards spontaneous nucleation has to be coupled with a supramolecular polymerization pathway, which is challenging to achieve by molecular design. Herein, we report a rational approach to addressing this issue. We combined the supramolecular polymerization and photoisomerization processes to build the energy landscape, wherein the monomer can be activated/deactivated by light irradiation. In this way, the supramolecular polymerization and kinetic trap can be independently designed in the energy landscape. When the "dormant" monomer was activated by light in the presence of the seed of the supramolecular polymer, the "activated" free monomer was polymerized at the termini of the seed in a chain-growth manner. As a result, we achieved supramolecular polymers with controlled lengths and a narrow polydispersity. Although photoisomerization has been extensively employed in supramolecular polymer chemistry, most studies have focused on the stimuli responsiveness. In this respect, the present study would provoke supramolecular chemists to revisit stimuli-responsive supramolecular polymer systems as potential candidates for devising living supramolecular polymerization.

Computationally designed peptides for self-assembly of nanostructured lattices

Folded peptides present complex exterior surfaces specified by their amino acid sequences, and the control of these surfaces offers high-precision routes to self-assembling materials. The complexity of peptide structure and the subtlety of noncovalent interactions make the design of predetermined nanostructures difficult. Computational methods can facilitate this design and are used here to determine 29-residue peptides that form tetrahelical bundles that, in turn, serve as building blocks for lattice-forming materials. Four distinct assemblies were engineered. Peptide bundle exterior amino acids were designed in the context of three different interbundle lattices in addition to one design to produce bundles isolated in solution. Solution assembly produced three different types of lattice-forming materials that exhibited varying degrees of agreement with the chosen lattices used in the design of each sequence. Transmission electron microscopy revealed the nanostructure of the sheetlike nanomaterials. In contrast, the peptide sequence designed to form isolated, soluble, tetrameric bundles remained dispersed and did not form any higher-order assembled nanostructure. Small-angle neutron scattering confirmed the formation of soluble bundles with the designed size. In the lattice-forming nanostructures, the solution assembly process is robust with respect to variation of solution conditions (pH and temperature) and covalent modification of the computationally designed peptides. Solution conditions can be used to control micrometer-scale morphology of the assemblies. The findings illustrate that, with careful control of molecular structure and solution conditions, a single peptide motif can be versatile enough to yield a wide range of self-assembled lattice morphologies across many length scales (1 to 1000 nm).

Microfibres and macroscopic films from the coordination-driven hierarchical self-assembly of cylindrical micelles

Anisotropic nanoparticles prepared from block copolymers are of growing importance as building blocks for the creation of synthetic hierarchical materials. However, the assembly of these structural units is generally limited to the use of amphiphilic interactions. Here we report a simple, reversible coordination-driven hierarchical self-assembly strategy for the preparation of micron-scale fibres and macroscopic films based on monodisperse cylindrical block copolymer micelles. Coordination of Pd(0) metal centres to phosphine ligands immobilized within the soluble coronas of block copolymer micelles is found to induce intermicelle crosslinking, affording stable linear fibres comprised of micelle subunits in a staggered arrangement. The mean length of the fibres can be varied by altering the micelle concentration, reaction stoichiometry or aspect ratio of the micelle building blocks. Furthermore, the fibres aggregate on drying to form robust, self-supporting macroscopic micelle-based thin films with useful mechanical properties that are analogous to crosslinked polymer networks, but on a longer length scale.

Rational design of ABC triblock terpolymer solution nanostructures with controlled patch morphology

Block copolymers self-assemble into a variety of nanostructures that are relevant for science and technology. While the assembly of diblock copolymers is largely understood, predicting the solution assembly of triblock terpolymers remains challenging due to complex interplay of block/block and block/solvent interactions. Here we provide guidelines for the self-assembly of linear ABC triblock terpolymers into a large variety of multicompartment nanostructures with C corona and A/B cores. The ratio of block lengths NC/NA thereby controls micelle geometry to spheres, cylinders, bilayer sheets and vesicles. The insoluble blocks then microphase separate to core A and surface patch B, where NB controls the patch morphology to spherical, cylindrical, bicontinuous and lamellar. The independent control over both parameters allows constructing combinatorial libraries of unprecedented solution nanostructures, including spheres-on-cylinders/sheets/vesicles, cylinders-on-sheets/vesicles, and sheets/vesicles with bicontinuous or lamellar membrane morphology (patchy polymersomes). The derived parameters provide a logical toolbox towards complex self-assemblies for soft matter nanotechnologies.

Janus particles for biological imaging and sensing

Janus particles, named after the two-faced Roman god Janus, have different surface makeups, structures or compartments on two sides. This review highlights recent advances in employing Janus particles as novel analytical tools for live cell imaging and biosensing. Unlike conventional particles used in analytical science, two-faced Janus particles provide asymmetry and directionality, and can combine different or even incompatible properties within a single particle. The broken symmetry enables imaging and quantification of rotational dynamics, revealing information beyond what traditional measurements offer. The spatial segregation of molecules on the surface of a single particle also allows analytical functions that would otherwise interfere with each other to be decoupled, opening up opportunities for novel multimodal analytical methods. We summarize here the development of Janus particles, a few general methods for their fabrication and, more importantly, the emerging and novel applications of Janus particles as multi-functional imaging probes and sensors.

Uniform patchy and hollow rectangular platelet micelles from crystallizable polymer blends

The preparation of colloidally stable, self-assembled materials with tailorable solid or hollow two-dimensional (2D) structures represents a major challenge. We describe the formation of uniform, monodisperse rectangular platelet micelles of controlled size by means of seeded-growth methods that involve the addition of blends of crystalline-coil block copolymers and the corresponding crystalline homopolymer to cylindrical micelle seeds. Sequential addition of different blends yields solid platelet block comicelles with concentric rectangular patches with distinct coronal chemistries. These complex nano-objects can be subject to spatially selective processing that allows their disassembly to form perforated platelets, such as well-defined hollow rectangular rings. The solid and hollow 2D micelles provide a tunable platform for further functionalization and potential for a variety of applications.

[n]Ferrocenophanes (n = 2, 3) with Nitrogen and Phosphorus in Bridging Positions

The in situ prepared dilithio derivative of the known species 1-bromo-1'-(trimethylsilylamino)ferrocene (1) reacted with tBuPCl2 to form the first example of a [2]ferrocenophane ([2]FCP) bridged by nitrogen and phosphorus (2). Sulfurization of 2 followed by column chromatography on silica gel gave the expected [2]FCP with a tBu(S)PN(SiMe3) bridging moiety (3a) and its desilylated counterpart with a tBu(S)PNH bridging moiety (3b). The molecular structure of 3b was determined by single-crystal X-ray analysis (α = 18.40(11)°). Using a common synthetic methodology, two new 1-amino-1'-bromoferrocene derivatives were prepared, one species with a PhCH2 (6a) and another with a tBuCH2 group (6b) on nitrogen. Dilithiation of 6a followed by addition of tBuPCl2 gave a mixture of three constitutional isomers: the targeted [2]FCP (7a), the 1,1'-disubstituted ferrocene derivative (tBuPH)(PhCH═N)fc (8a), and the [3]FCP bridged by a (NH)(CHPh)PtBu moiety (9a). NMR spectroscopy revealed that 8a is the precursor for 9a. The salt-metathesis reaction of the dilithio derivative of 6b with tBuPCl2 exclusively gave the 1,1'-disubstituted ferrocene derivative (tBuPH)(tBuCH═N)fc (8b), which does not isomerize to the respective [3]FCP. DFT calculations at the M06/6-311+G(d,p) level were used to better rationalize these unexpected results.

Amphiphilic Janus Particles Generated via a Combination of Diffusion-Induced Phase Separation and Magnetically Driven Dewetting and Their Synergistic Self-Assembly

Amphiphilic Janus particles are successfully obtained via a powerful strategy combining diffusion-induced phase separation and magnetically driven dewetting. A large-area, amphiphilic monolayer is been formed via a self-assembly paradigm based on a synergy between the amphiphilicity, shape anisotropy, and external magnetic field. This functionality holds great promise for practical applications in intelligent coatings, anti-bioadhesion, and antifouling surfaces.

Superstructure Formation and Topological Evolution Achieved by Self-Organization of a Highly Adaptive Dynamer

The adaptive property of supramolecular building blocks facilitates noncovalent synthesis of soft materials. While it is still a challenging task, fine-tuning and precise control over topological nanostructures constructed from the self-assembly of low-molecular-weight building blocks are an important research direction to investigate the structure-property relationship. Herein, we report controlled self-assembly evolution of a low-molecular-weight building block bearing cholesterol and naphthalene-dicarboximide moieties, showing ultrasensitivity to solvent polarity. In low-polarity solvents (<4), it could form an M-type fiber-constituted organogel (supergel) with high solvent content, columnar molecular packing, and self-healing property. Highly polar solvents (>7.8) favor the formation of P-type helical nanostructures terminated by nanotoroids, having lamellar molecular packing. With a further increase in solvent polarity (up to 9.6), unilamellar and multilamellar vesicles were generated, which could undergo an aggregation-induced fusion process to form branched nanotubes tuned by the concentration. Self-attractive interactions between aggregates were found to be responsible for the formation of superstructures including helix-nanotoroid junctions as well as membrane-fused nanotubes.

Reversible Morphological Evolution of Responsive Giant Vesicles to Nanospheres by the Self-Assembly of Crystalline-b-Coil Polyphosphazene Block Copolymers

The preparation of long-term-stable giant unilamellar vesicles (GUVs, diameter ≥ 1000 nm) and large vesicles (diameter ≥ 500 nm) by self-assembly in THF of the crystalline-b-coil polyphosphazene block copolymers [N=P(OCH2CF3)2 ]n-b-[N=PMePh]m (4 a: n=30, m=20; 4 b: n=90, m=20; 4 c: n=200, m=85), which combine crystalline [N=P(OCH2CF3)2] and amorphous [N=PMePh] blocks, both of which are flexible, is reported. SEM, TEM, and wide-angle X-ray scattering experiments demonstrated that the stability of these GUVs is induced by crystallization of the [N=P(OCH2CF3)2] blocks at the capsule wall of the GUVS, with the [N=PMePh] blocks at the corona. Higher degrees of crystallinity of the capsule wall are found in the bigger vesicles, which suggests that the crystallinity of the [N=P(OCH2CF3)2] block facilitates the formation of large vesicles. The GUVs are responsive to strong acids (HOTf) and, after selective protonation of the [N=PMePh] block, they undergo a morphological evolution to smaller spherical micelles in which the core and corona roles have been inverted. This morphological evolution is totally reversible by neutralization with a base (NEt3), which regenerates the original GUVs. The monitoring of this process by dynamic light scattering allowed a mechanism to to be proposed for this reversible morphological evolution in which the block copolymer 4 a and its protonated form 4 a(+) are intermediates. This opens a route to the design of reversibly responsive polymeric systems in organic solvents. This is the first reversibly responsive vesicle system to operate in organic media.

Polyferrocenylsilanes: synthesis, properties, and applications

This comprehensive review covers polyferrocenylsilanes (PFSs), a well-established, readily accessible class of main chain organosilicon metallopolymer. The focus is on the recent advances involving PFS homopolymers and block copolymers and the article covers the synthesis, properties, and applications of these fascinating materials.

Shear-induced self-assembly of linear ABC triblock copolymers in solution: creation of 1D cylindrical micellar structures

In this work, shear flow is introduced to create 1D cylindrical micellar structures based on solution self-assembly of linear ABC terpolymers.

Stepwise Formation of Photoconductive Nanotubes through a New Top-Down Method

In contrast to the widely used bottom-up strategy for preparing various complex nanostructures, the top-down strategy is rarely applied to generate complex nanostructures. This study reports the use of a unique combination of bottom-up and top-down processes for the time-resolved stepwise fabrication of novel photoconductive nanotubes from elaborately designed asymmetric perylene diimide molecules.

Hierarchical Polymer-Carbon Nanotube Hybrid Mesostructures by Crystallization-Driven Self-Assembly

Multistep crystallization-driven self-assembly has great potential to enable the construction of sophisticated hybrid mesostructures. During the assembly procedure, each step modifies the properties of the overall structure. Here, we demonstrate the flexibility and efficiency of this approach by preparing polymer-carbon nanotube (CNT) hybrid mesostructures. We started by growing polyferrocenyldimethylsilane (PFS) homopolymer crystals onto multiwalled CNTs. This first step facilitated the redispersion of the coated CNTs in both polar (2-propanol) and nonpolar (decane) solvents. In the second step of hybrid construction, a unimer solution of a PFS block copolymer was added into the PFS-CNT solution. The PFS coating on the CNT initiated the growth of elongated micelles, resulting in structures that resembled hairy caterpillars. PFS-b-P2VP (P2VP = poly-2-vinylpyridine) micelles were grown from the surface of PFS-CNT hybrids in 2-propanol, and PFS-b-PI (PI = polyisoprene) micelles were grown from these hybrids in decane. These micelles, by transmission electron microscopy were seen to have an unusual wavy kinked structure, very different from the uniform smooth structures normally formed by both block copolymers. For hybrids with PFS-b-PI micelles, cross-linking of the micelle coronas locked the whole structure in place and allowed us to use the partial oxidation of PFS components to grow metal nanoparticles in the core of these micelles. We finally investigated the influence of the corona-forming block used to grow the micelles on the wettability of films made from these mesostructures. Films formed with CNT hybrids grafted with PFS-b-PI micelles were superhydrophobic (contact angle, 152°). In contrast, the surface of the films was much more hydrophilic (contact angle, 54°) when they were prepared from CNT hybrids grafted with PFS-b-P2VP micelles.

In Situ Visualization of Block Copolymer Self-Assembly in Organic Media by Super-Resolution Fluorescence Microscopy

Analytical methods that enable visualization of nanomaterials derived from solution self‐assembly processes in organic solvents are highly desirable. Herein, we demonstrate the use of stimulated emission depletion microscopy (STED) and single molecule localization microscopy (SMLM) to map living crystallization‐driven block copolymer (BCP) self‐assembly in organic media at the sub‐diffraction scale. Four different dyes were successfully used for single‐colour super‐resolution imaging of the BCP nanostructures allowing micelle length distributions to be determined in situ. Dual‐colour SMLM imaging was used to measure and compare the rate of addition of red fluorescent BCP to the termini of green fluorescent seed micelles to generate block comicelles. Although well‐established for aqueous systems, the results highlight the potential of super‐resolution microscopy techniques for the interrogation of self‐assembly processes in organic media.

General synthesis of inorganic single-walled nanotubes

The single-walled nanotube (SWNT) is an interesting nanostructure for fundamental research and potential applications. However, very few inorganic SWNTs are available to date due to the lack of efficient fabrication methods. Here we synthesize four types of SWNT: sulfide; hydroxide; phosphate; and polyoxometalate. Each type of SWNT possesses essentially uniform diameters. Detailed studies illustrate that the formation of SWNTs is initiated by the self-coiling of the corresponding ultrathin nanostructure embryo/building blocks on the base of weak interactions between them, which is not limited to specific compounds or crystal structures. The interactions between building blocks can be modulated by varying the solvents used, thus multi-walled tubes can also be obtained. Our results reveal that the generalized synthesis of inorganic SWNTs can be achieved by the self-coiling of ultrathin building blocks under the proper weak interactions.

Single walled nanotubes are promising materials for both fundamental research and advanced applications. Here, the authors develop the synthesis of four types of inorganic single walled nanotube, and show that their formation is initiated by the self-coiling of their ultrathin building blocks.