Crystal structure of P22 tailspike protein: interdigitated subunits in a thermostable trimer

Predicting the beta-helix fold from protein sequence data

A method is presented that uses beta-strand interactions to predict the parallel right-handed beta-helix super-secondary structural motif in protein sequences. A program called BetaWrap implements this method and is shown to score known beta-helices above non-beta-helices in the Protein Data Bank in cross-validation. It is demonstrated that BetaWrap learns each of the seven known SCOP beta-helix families, when trained primarily on beta-structures that are not beta-helices, together with structural features of known beta-helices from outside the family. BetaWrap also predicts many bacterial proteins of unknown structure to be beta-helices; in particular, these proteins serve as virulence factors, adhesins, and toxins in bacterial pathogenesis and include cell surface proteins from Chlamydia and the intestinal bacterium Helicobacter pylori. The computational method used here may generalize to other beta-structures for which strand topology and profiles of residue accessibility are well conserved.

Differences in the solution structures of the parallel beta-helical pectate lyases as determined by limited proteolysis

The pectate lyase family of proteins has been shown to fold into a novel domain motif, the right-handed parallel beta-helix. As a means of gaining insight to the solution structure of the pectate lyases, the enzymes were subjected to limited proteolytic digestion by the endoproteases AspN, GluC and trypsin. The effects of proteolytic cleavage on enzymatic activity were determined, and the early products of proteolysis were identified by capillary electrophoresis, MALDI-TOF mass spectrometry and HPLC. A single peptide bond between Lys158 and Asp159 in pectate lyase B (PLb) was cleaved by both AspN and trypsin, with no detectable hydrolysis of PLb by GluC. Pectate lyase E (PLe) was hydrolyzed by trypsin between Lys164 and Asp165, a bond on an analogous loop structure found to be susceptible to proteolytic attack in PLb. AspN and GluC preferentially hydrolyzed peptide bonds (at Asp127 and Glu124, respectively) on another loop extending from the central beta-helical core of PLe. A single beta-strand of the central cylinder of the pectate lyase C (PLc) molecule was susceptible to all three proteases used. These data demonstrate that the most susceptible peptide bonds to proteolytic scission within the native enzymes lie on or near one of the three parallel beta-sheets that compose the core domain motif Despite the proximity of the proteolytic cleavages to the catalytic sites of the enzymes, significant retention of lyase activity was observed after partial proteolysis, indicating preservation of functional tertiary structure in the proteolytic products.

Imbroglios of viral taxonomy: genetic exchange and failings of phenetic approaches

The practice of classifying organisms into hierarchical groups originated with Aristotle and was codified into nearly immutable biological law by Linnaeus. The heart of taxonomy is the biological species, which forms the foundation for higher levels of classification. Whereas species have long been established among sexual eukaryotes, achieving a meaningful species concept for prokaryotes has been an onerous task and has proven exceedingly difficult for describing viruses and bacteriophages. Moreover, the assembly of viral "species" into higher-order taxonomic groupings has been even more tenuous, since these groupings were based initially on limited numbers of morphological features and more recently on overall genomic similarities. The wealth of nucleotide sequence information that catalyzed a revolution in the taxonomy of free-living organisms necessitates a reevaluation of the concept of viral species, genera, families, and higher levels of classification. Just as microbiologists discarded dubious morphological traits in favor of more accurate molecular yardsticks of evolutionary change, virologists can gain new insight into viral evolution through the rigorous analyses afforded by the molecular phylogenetics of viral genes. For bacteriophages, such dissections of genomic sequences reveal fundamental flaws in the Linnaean paradigm that necessitate a new view of viral evolution, classification, and taxonomy.

Biochemical characterization of the chondroitinase B active site

Chondroitinase B from Flavobacterium heparinum is the only known lyase that cleaves the glycosaminoglycan, dermatan sulfate (DS), as its sole substrate. A recent co-crystal structure of chondroitinase B with a disaccharide product of DS depolymerization has provided some insight into the location of the active site and suggested potential roles of some active site residues in substrate binding and catalysis. However, this co-crystal structure was not representative of the actual enzyme-substrate complex, because the disaccharide product did not have the right length or the chemical structure of the minimal substrate (tetrasaccharide) involved in catalysis. Therefore, only a limited picture of the functional role of active site residues in DS depolymerization was presented in previous structural studies. In this study, by docking a DS tetrasaccharide into the proposed active site of the enzyme, we have identified novel roles of specific active site amino acids in the catalytic function of chondroitinase B. Our conformational analysis also revealed a unique, symmetrical arrangement of active site amino acids that may impinge on the catalytic mechanism of action of chondroitinase B. The catalytic residues Lys-250, Arg-271, His-272, and Glu-333 along with the substrate binding residues Arg-363 and Arg-364 were mutated using site-directed mutagenesis, and the kinetics and product profile of each mutant were compared with recombinant chondroitinase B. Mutating Lys-250 to alanine resulted in inactivation of the enzyme, potentially attributable to the role of the residue in stabilizing the carbanion intermediate formed during enzymatic catalysis. The His-272 and Glu-333 mutants showed diminished enzymatic activity that could be indicative of a possible role for one or both residues in the abstraction of the C-5 proton from the galactosamine. In addition, the Arg-364 mutant had an altered product profile after exhaustive digestion of DS, suggesting a role for this residue in defining the substrate specificity of chondroitinase B.

New structural insights from Raman spectroscopy of proteins and their assemblies

Protein structure and stability are sensitive to and dependent on the local interactions of amino acid side chains. A diverse and important type of side-chain interaction is the hydrogen bond. Although numerous hydrogen bonds are resolved in protein 3-dimensional structures, those of the cysteine sulfhydryl group (S-H) are elusive to high-resolution X-ray and NMR methods. However, the nature and strength of sulfhydryl hydrogen bonds (S-H* * *X) are amenable to investigation by Raman spectroscopy. The power of the Raman method for characterizing S-H* * *X interactions is illustrated by resolving the Raman S-H stretching band for each of the eight cysteines per 666-residue subunit in the trimeric tailspike of icosahedral bacteriophage P22. The Raman sulfhydryl signatures of the wild-type tailspike and eight single-site cysteine to serine mutants reveal a heretofore unrecognized diversity of S-H hydrogen bonds in a native protein. The use of Raman spectroscopy to identify the non-hydrogen-bonded state of the tyrosine phenoxyl group is also described. This unusual and unexpected state occurs for all tyrosines in the assembled capsids of filamentous viruses Ff and Pf1. The Raman spectral signature of the non-hydrogen-bonded tyrosine phenoxyl, which is characterized by an extraordinary Raman Fermi doublet intensity ratio (I850/I830 = 6.7), extends and refines the existing correlation for hydrogen-bonded tyrosines. Finally, a novel Raman signature for tryptophan in the Pf3 filamentous virus is identified, which is proposed as diagnostic of "cation-pi interaction" involving the guanidinium group of Arg 37 as a cation donor and the indolyl ring of Trp 38 as a pi-electron acceptor. These studies demonstrate the power of Raman spectroscopy for investigating the interactions of key side chains in native protein assemblies.

The interdigitated beta-helix domain of the P22 tailspike protein acts as a molecular clamp in trimer stabilization

The P22 tailspike adhesin is an elongated thermostable trimer resistant to protease digestion and to denaturation in sodium dodecyl sulfate. Monomeric, dimeric, and protrimeric folding and assembly intermediates lack this stability and are thermolabile. In the native trimer, three right-handed parallel beta-helices (residues 143-540), pack side-by-side around the three-fold axis. After residue 540, these single chain beta-helices terminate and residues 541-567 of the three polypeptide chains wrap around each other to form a three-stranded interdigitated beta-helix. Three mutants located in this region -- G546D, R563Q, and A575T -- blocked formation of native tailspike trimers, and accumulated soluble forms of the mutant polypeptide chains within cells. The substitutions R563Q and A575T appeared to prevent stable association of partially folded monomers. G546D, in the interdigitated region of the chain, blocked tailspike folding at the transition from the partially-folded protrimer to the native trimer. The protrimer-like species accumulating in the G546D mutant melted out at 42 degrees C and was trypsin and SDS sensitive. The G546D defect was not corrected by introduction of global suppressor mutations, which correct kinetic defects in beta-helix folding. The simplest interpretation of these results is that the very high thermostability (T(m) = 88 degrees C), protease and detergent resistance of the native tailspike acquired in the protrimer-to-trimer transition, depends on the formation of the three-stranded interdigitated region. This interdigitated beta-helix appears to function as a molecular clamp insuring thermostable subunit association in the native trimer.

Structure of the cell-puncturing device of bacteriophage T4

Bacteriophage T4 has a very efficient mechanism for infecting cells. The key component of this process is the baseplate, located at the end of the phage tail, which regulates the interaction of the tail fibres and the DNA ejection machine. A complex of gene product (gp) 5 (63K) and gp27 (44K), the central part of the baseplate, is required to penetrate the outer cell membrane of Escherichia coli and to disrupt the intermembrane peptidoglycan layer, promoting subsequent entry of phage DNA into the host. We present here a crystal structure of the (gp5-gp27)3 321K complex, determined to 2.9 A resolution and fitted into a cryo-electron microscopy map at 17 A resolution of the baseplate-tail tube assembly. The carboxy-terminal domain of gp5 is a triple-stranded beta-helix that forms an equilateral triangular prism, which acts as a membrane-puncturing needle. The middle lysozyme domain of gp5, situated on the periphery of the prism, serves to digest the peptidoglycan layer. The amino-terminal, antiparallel beta-barrel domain of gp5 is inserted into a cylinder formed by three gp27 monomers, which may serve as a channel for DNA ejection.

Review: conformation and folding of novel beta-structural elements in viral fiber proteins: the triple beta-spiral and triple beta-helix

Apart from alpha-helical coiled coils and the collagen triple helices, fibrous proteins can contain beta-structure in various conformations. Elongated enzymes such as pectate lyase and the bacteriophage P22 tailspike protein contain single-stranded beta-helices. Virus and bacteriophage fibers, which are often trimeric, have been shown to contain novel triple-stranded beta-structures such as the triple beta-spiral and the triple beta-helix. The conformation and folding of viral fibers containing beta-structure are discussed.

Crystal structure of a heat and protease-stable part of the bacteriophage T4 short tail fibre

Adsorption of T4 bacteriophage to the Escherichia coli host cell is mediated by six long and six short tail fibres. After at least three long tail fibres have bound, short tail fibres extend and bind irreversibly to the core region of the host cell lipopolysaccharide (LPS), serving as inextensible stays during penetration of the cell envelope by the tail tube. The short tail fibres consist of a parallel, in-register, trimer of gene product 12 (gp12). The 1.9 A crystal structure of a heat and protease-stable fragment of gp12 reveals three new folds: a central right-handed triple beta-helix, a globular C-terminal domain containing a beta-sandwich and an N-terminal beta-structure reminiscent of but different from the adenovirus triple beta-spiral. The centre of the C-terminal domain shows weak homology to gp11, a trimeric protein connecting the short fibre to the base-plate, suggesting that the trimerisation motifs of gp11 and gp12 are similar. Repeating sequence motifs suggest that the N-terminal beta-structure extends further towards the N terminus and is conserved in the long tail fibre proteins gp34 and gp37.

Differentiation of beta-sheet-forming structures: ab initio-based simulations of IR absorption and vibrational CD for model peptide and protein beta-sheets

Ab initio quantum mechanical computations of force fields (FF) and atomic polar and axial tensors (APT and AAT) were carried out for triamide strands Ac-A-A-NH-CH(3) clustered into single-, double-, and triple-strand beta-sheet-like conformations. Models with phi, psi, and omega angles constrained to values appropriate for planar antiparallel and parallel as well as coiled antiparallel (two-stranded) and twisted antiparallel and parallel sheets were computed. The FF, APT, and AAT values were transferred to corresponding larger oligopeptide beta-sheet structures of up to five strands of eight residues each, and their respective IR and vibrational circular dichroism (VCD) spectra were simulated. The antiparallel planar models in a multiple-stranded assembly give a unique IR amide I spectrum with a high-intensity, low-frequency component, but they have very weak negative amide I VCD, both reflecting experimental patterns seen in aggregated structures. Parallel and twisted beta-sheet structures do not develop a highly split amide I, their IR spectra all being similar. A twist in the antiparallel beta-sheet structure leads to a significant increase in VCD intensity, while the parallel structure was not as dramatically affected by the twist. The overall predicted VCD intensity is quite weak but predominantly negative (amide I) for all conformations. This intrinsically weak VCD can explain the high variation seen experimentally in beta-forming peptides and proteins. An even larger variation was predicted in the amide II VCD, which had added complications due to non-hydrogen-bonded residues on the edges of the model sheets.

The iota-carrageenase of Alteromonas fortis. A beta-helix fold-containing enzyme for the degradation of a highly polyanionic polysaccharide

Carrageenans are gel-forming hydrocolloids extracted from the cell walls of marine red algae. They consist of d-galactose residues bound by alternate alpha(1-->3) and beta(1-->4) linkages and substituted by one (kappa-carrageenan), two (iota-carrageenan), or three (lambda-carrageenan) sulfate-ester groups per disaccharide repeating unit. Both the kappa- and iota-carrageenan chains adopt ordered conformations leading to the formation of highly ordered aggregates of double-stranded helices. Several kappa-carrageenases and iota-carrageenases have been cloned from marine bacteria. Kappa-carrageenases belong to family 16 of the glycoside hydrolases, which essentially encompasses polysaccharidases specialized in the hydrolysis of the neutral polysaccharides such as agarose, laminarin, lichenan, and xyloglucan. In contrast, iota-carrageenases constitute a novel glycoside hydrolase structural family. We report here the crystal structure of Alteromonas fortis iota-carrageenase at 1.6 A resolution. The enzyme folds into a right-handed parallel beta-helix of 10 complete turns with two additional C-terminal domains. Glu(245), Asp(247), or Glu(310), in the cleft of the enzyme, are proposed as candidate catalytic residues. The protein contains one sodium and one chloride binding site and three calcium binding sites shown to be involved in stabilizing the enzyme structure.

The architecture of parallel beta-helices and related folds

Three-dimensional structures have been determined of a large number of proteins characterized by a repetitive fold where each of the repeats (coils) supplies a strand to one or more parallel beta-sheets. Some of these proteins form superfamilies of proteins, which have probably arisen by divergent evolution from a common ancestor. The classical example is the family including four families of pectinases without obviously related primary sequences, the phage P22 tailspike endorhamnosidase, chrondroitinase B and possibly pertactin from Bordetella pertusis. These show extensive stacking of similar residues to give aliphatic, aromatic and polar stacks such as the asparagine ladder. This suggests that coils can be added or removed by duplication or deletion of the DNA corresponding to one or more coils and explains how homologous proteins can have different numbers of coils. This process can also account for the evolution of other families of proteins such as the beta-rolls, the leucine-rich repeat proteins, the hexapeptide repeat family, two separate families of beta-helical antifreeze proteins and the spiral folds. These families need not be related to each other but will share features such as relative untwisted beta-sheets, stacking of similar residues and turns between beta-strands of approximately 90 degrees often stabilized by hydrogen bonding along the direction of the parallel beta-helix.Repetitive folds present special problems in the comparison of structures but offer attractive targets for structure prediction. The stacking of similar residues on a flat parallel beta-sheet may account for the formation of amyloid with beta-strands at right-angles to the fibril axis from many unrelated peptides.

Beta-helix model for the filamentous haemagglutinin adhesin of Bordetella pertussis and related bacterial secretory proteins

Bordetella pertussis establishes infection by attaching to epithelial cells of the respiratory tract. One of its adhesins is filamentous haemagglutinin (FHA), a 500-A-long secreted protein that is rich in beta-structure and contains two regions, R1 and R2, of tandem 19-residue repeats. Two models have been proposed in which the central shaft is (i) a hairpin made up of a pairing of two long antiparallel beta-sheets; or (ii) a beta-helix in which the polypeptide chain is coiled to form three long parallel beta-sheets. We have analysed a truncated variant of FHA by electron microscopy (negative staining, shadowing and scanning transmission electron microscopy of unstained specimens): these observations support the latter model. Further support comes from detailed sequence analysis and molecular modelling studies. We applied a profile search method to the sequences adjacent to and between R1 and R2 and found additional "covert" copies of the same motifs that may be recognized in overt form in the R1 and R2 sequence repeats. Their total number is sufficient to support the tenet of the beta-helix model that the shaft domain--a 350 A rod--should consist of a continuous run of these motifs, apart from loop inserts. The N-terminus, which does not contain such repeats, was found to be weakly homologous to cyclodextrin transferase, a protein of known immunoglobulin-like structure. Drawing on crystal structures of known beta-helical proteins, we developed structural models of the coil motifs putatively formed by the R1 and R2 repeats. Finally, we applied the same profile search method to the sequence database and found several other proteins--all large secreted proteins of bacterial provenance--that have similar repeats and probably also similar structures.

The X-ray structure of Aspergillus aculeatus polygalacturonase and a modeled structure of the polygalacturonase-octagalacturonate complex

Polygalacturonases hydrolyze the alpha-(1-4) glycosidic bonds of de-esterified pectate in the smooth region of the plant cell wall. Crystal structures of polygalacturonase from Aspergillus aculeatus were determined at pH 4.5 and 8.5 both to 2.0 A resolution. A. aculeatus polygalacturonase is a glycoprotein with one N and ten O-glycosylation sites and folds into a right-handed parallel beta-helix. The structures of the three independent molecules are essentially the same, showing no dependency on pH or crystal packing, and are very similar to that of Aspergillus niger polygalacturonase. However, the structures of the long T1 loop containing a catalytic tyrosine residue are significantly different in the two proteins. A three-dimensional model showing the substrate binding mode for a family 28 hydrolase was obtained by a combined approach of flexible docking, molecular dynamics simulations, and energy minimization. The octagalacturonate substrate was modeled as an unbent irregular helix with the -1 ring in a half-chair ((4)H(3)) form that approaches the transition state conformation. A comparative modeling of the three polygalacturonases with known structure shows that six subsites ranging from -4 to +2 are clearly defined but subsites -5 and +3 may or may not be shaped depending on the nearby amino acid residues. Both distal subsites are mostly exposed to the solvent region and have weak binding affinity even if they exist. The complex model provides a clear explanation for the functions, either in catalysis or in substrate binding, of all conserved amino acid residues in the polygalacturonase family of proteins. Modeling suggests that the role of the conserved Asn157 and Tyr270, which had previously been unidentified, may be in transition state stabilization. In A. niger polygalacturonase, the long T1 loop may have to undergo conformational change upon binding of the substrate to bring the tyrosine residue close to subsite -1.

A newly synthesized, ribosome-bound polypeptide chain adopts conformations dissimilar from early in vitro refolding intermediates

Little is known about the conformations of newly synthesized polypeptide chains as they emerge from the large ribosomal subunit, or how these conformations compare with those populated immediately after dilution of polypeptide chains out of denaturant in vitro. Both in vivo and in vitro, partially folded intermediates of the tailspike protein from Salmonella typhimurium phage P22 can be trapped in the cold. A subset of monoclonal antibodies raised against tailspike recognize partially folded intermediates, whereas other antibodies recognize only later intermediates and/or the native state. We have used a pair of monoclonal antibodies to probe the conformational features of full-length, newly synthesized tailspike chains recovered on ribosomes from phage-infected cells. The antibody that recognizes early intermediates in vitro also recognizes the ribosome-bound intermediates. Surprisingly, the antibody that did not recognize early in vitro intermediates did recognize ribosome-bound tailspike chains translated in vivo. Thus, the newly synthesized, ribosome-bound tailspike chains display structured epitopes not detected upon dilution of tailspike chains from denaturant. As opposed to the random ensemble first populated when polypeptide chains are diluted out of denaturant, folding in vivo from the ribosome may begin with polypeptide conformations already directed toward the productive folding and assembly pathway.

Identification and crystallisation of a heat- and protease-stable fragment of the bacteriophage T4 short tail fibre

Irreversible binding of T-even bacteriophages to Escherichia coli is mediated by the short tail fibres, which serve as inextensible stays during DNA injection. Short tail fibres are exceptionally stable elongated trimers of gene product 12 (gp12), a 56 kDa protein. The N-terminal region of gp12 is important for phage attachment, the central region forms a long shaft, while a C-terminal globular region is implicated in binding to the bacterial lipopolysaccharide core. When gp12 was treated with stoichiometric amounts of trypsin or chymotrypsin at 37 degrees C, an N-terminally shortened fragment of 52 kDa resulted. If the protein was incubated at 56 degrees C before trypsin treatment at 37 degrees C, we obtained a stable trimeric fragment of 3 x 33 kDa lacking residues from both the N- and C-termini. Apparently, the protein unfolds partially at 56 degrees C, thereby exposing protease-sensitive sites in the C-terminal region and extra sites in the N-terminal region. Well-diffracting crystals of this fragment could be grown. Our results indicate that gp12 carries a stable central region, consisting of the C-terminal part of the shaft and the attached N-terminal half of the globular region. Implications for structure determination of the gp12 protein and its folding are discussed.

Is Congo red an amyloid-specific dye?

Congo red (CR) binding, monitored by characteristic yellow-green birefringence under crossed polarization has been used as a diagnostic test for the presence of amyloid in tissue sections for several decades. This assay is also widely used for the characterization of in vitro amyloid fibrils. In order to probe the structural specificity of Congo red binding to amyloid fibrils we have used an induced circular dichroism (CD) assay. Amyloid fibrils from insulin and the variable domain of Ig light chain demonstrate induced CD spectra upon binding to Congo red. Surprisingly, the native conformations of insulin and Ig light chain also induced Congo red circular dichroism, but with different spectral shapes than those from fibrils. In fact, a wide variety of native proteins exhibited induced CR circular dichroism indicating that CR bound to representative proteins from different classes of secondary structure such as alpha (citrate synthase), alpha + beta (lysozyme), beta (concavalin A), and parallel beta-helical proteins (pectate lyase). Partially folded intermediates of apomyoglobin induced different Congo red CD bands than the corresponding native conformation, however, no induced CD bands were observed with unfolded protein. Congo red was also found to induce oligomerization of native proteins, as demonstrated by covalent cross-linking and small angle x-ray scattering. Our data suggest that Congo red is sandwiched between two protein molecules causing protein oligomerization. The fact that Congo red binds to native, partially folded conformations and amyloid fibrils of several proteins shows that it must be used with caution as a diagnostic test for the presence of amyloid fibrils in vitro.

Distinct cysteine sulfhydryl environments detected by analysis of Raman S-hh markers of Cys-->Ser mutant proteins

Very little is known about the character or functional relevance of hydrogen-bonded cysteine sulfhydryl (S-H) groups in proteins. The Raman S-H band is a unique and sensitive probe of the local S-H environment. Here, we report the use of Raman spectroscopy combined with site-specific mutagenesis to document the existence of five distinguishable hydrogen-bonded states of buried cysteine sulfhydryl groups in a native protein. The 666 residue subunit of the Salmonella typhimurium bacteriophage P22 tailspike contains eight cysteine residues distributed through the elongated structure. The tailspike cysteine residues display an unusual Raman S-H band complex (2500-2600 cm(-1) interval) indicative of diverse S-H hydrogen-bonding interactions in the native trimeric structure. To resolve specific Cys contributions to the complex Raman band we characterized a set of tailspike proteins with each cysteine replaced by a serine. The mutant proteins, once folded, were structurally and functionally indistinguishable from wild-type tailspikes, except for their Raman S-H signatures. Comparison of the Raman spectra of the mutant and wild-type proteins reveals the following hydrogen-bond classes for cysteine sulfhydryl groups. (i) Cys613 forms the strongest S-H...X bond of the tailspike, stronger than any heretofore observed for a protein. (ii) Cys267, Cys287 and Cys458 form robust S-H...X bonds. (iii) Moderate S-H...X bonding occurs for Cys169 and Cys635. (iv) Cys290 and Cys496 form weak hydrogen bonds. (v) It is remarkable that Cys287 contributes two Raman S-H markers, indicating the population of two distinct hydrogen-bonding states. The sum of the S-H Raman signatures of all eight mutants accurately reproduces the composite Raman band of the wild-type tailspike. The diverse cysteine states may be an outcome of the folding and assembly pathway of the tailspike, which though lacking disulfide bonds in the native state, utilizes transient disulfide bonds in the maturation pathway. This Raman study represents the first detailed assessment of local S-H hydrogen bonding in a native protein and provides information not obtainable directly by other structural probes. The method employed here should be applicable to a wide range of cysteine-containing proteins.

Structural and functional comparison of polysaccharide-degrading enzymes

Sugar molecules as well as enzymes degrading them are ubiquitously present in physiological systems, especially for vertebrates. Polysaccharides have at least two aspects to their function, one due to their mechanical properties and the second one involves multiple regulatory processes or interactions between molecules, cells, or extracellular space. Various bacteria exert exogenous pressures on their host organism to diversity glycans and their structures in order for the host organism to evade the destructive function of such microbes. Many bacterial organism produce glycan-degrading enzymes in order to facilitate their invasion of host tissues. Such polysaccharide degrading enzymes utilize mainly two modes of polysaccharide-degradation, a hydrolysis and a beta-elimination process. The three-dimensional structures of several of these enzymes have been elucidated recently using X-ray crystallography. There are many common structural motifs among these enzymes, mainly the presence of an elongated cleft transversing these molecules which functions as a polysaccharide substrate binding site as well as the catalytic site for these enzymes. The detailed structural information obtained about these enzymes allowed formulation of proposed mechanisms of their action. The polysaccharide lyases utilize a proton acceptance and donation mechanism (PAD), whereas polysaccharide hydrolases use a direct double displacement (DD) mechanism to degrade their substrates.

Role for cysteine residues in the in vivo folding and assembly of the phage P22 tailspike

The predominantly beta-sheet phage P22 tailspike adhesin contains eight reduced cysteines per 666 residue chain, which are buried and unreactive in the native trimer. In the pathway to the native trimer, both in vivo and in vitro transient interchain disulfide bonds are formed and reduced. This occurs in the protrimer, an intermediate in the formation of the interdigitated beta-sheets of the trimeric tailspike. Each of the eight cysteines was replaced with serine by site-specific mutagenesis of the cloned P22 tailspike gene and the mutant genes expressed in Escherichia coli. Although the yields of native-like Cys>Ser proteins varied, sufficient soluble trimeric forms of each of the eight mutants accumulated to permit purification. All eight single Cys>Ser mature proteins maintained the high thermostability of the wild type, as well as the wild-type biological activity in forming infectious virions. Thus, these cysteine thiols are not required for the stability or activity of the native state. When their in vivo folding and assembly kinetics were examined, six of the mutant substitutions--C267S, C287S, C458S, C613S, and C635S--were significantly impaired at higher temperatures. Four--C290S, C496, C613S, and C635--showed significantly impaired kinetics even at lower temperatures. The in vivo folding of the C613S/C635S double mutant was severely defective independent of temperature. Since the trimeric states of the single Cys>Ser substituted chains were as stable and active as wild type, the impairment of tailspike maturation presumably reflects problems in the in vivo folding or assembly pathways. The formation or reduction of the transient interchain disulfide bonds in the protrimer may be the locus of these kinetic functions.

Protein aggregation as bacterial inclusion bodies is reversible

Inclusion bodies are refractile, intracellular protein aggregates usually observed in bacteria upon targeted gene overexpression. Since their occurrence has a major economical impact in protein production bio-processes, in vitro refolding strategies are under continuous exploration. In this work, we prove spontaneous in vivo release of both beta-galactosidase and P22 tailspike polypeptides from inclusion bodies resulting in their almost complete disintegration and in the concomitant appearance of soluble, properly folded native proteins with full biological activity. Since, in particular, the tailspike protein exhibits an unusually slow and complex folding pathway involving deep interdigitation of beta-sheet structures, its in vivo refolding indicates that bacterial inclusion body proteins are not collapsed into an irreversible unfolded state. Then, inclusion bodies can be observed as transient deposits of folding-prone polypeptides, resulting from an unbalanced equilibrium between in vivo protein precipitation and refolding that can be actively displaced by arresting protein synthesis. The observation that the formation of big inclusion bodies is reversible in vivo can be also relevant in the context of amyloid diseases, in which deposition of important amounts of aggregated protein initiates the pathogenic process.

Beta-helix core packing within the triple-stranded oligomerization domain of the P22 tailspike

A right-handed parallel beta-helix of 400 residues in 13 tightly packed coils is a major motif of the chains forming the trimeric P22 tailspike adhesin. The beta-helix domains of three identical subunits are side-by-side in the trimer and make predominantly hydrophilic inter-subunit contacts (Steinbacher S et al., 1994, Science 265:383-386). After the 13th coil the three individual beta-helices terminate and the chains wrap around each other to form three interdigitated beta-sheets organized into the walls of a triangular prism. The beta-strands then separate and form antiparallel beta-sheets, but still defining a triangular prism in which each side is a beta-sheet from a different subunit (Seckler R, 1998, J Struct Biol 122:216-222). The subunit interfaces are buried in the triangular core of the prism, which is densely packed with hydrophobic side chains from the three beta-sheets. Examination of this structure reveals that its packed core maintains the same pattern of interior packing found in the left-handed beta-helix, a single-chain structure. This packing is maintained in both the interdigitated parallel region of the prism and the following antiparallel sheet section. This oligomerization motif for the tailspike beta-helices presumably contributes to the very high thermal and detergent stability that is a property of the native tailspike adhesin.

Structure and function of pectic enzymes: virulence factors of plant pathogens

The structure and function of Erwinia chrysanthemi pectate lysase C, a plant virulence factor, is reviewed to illustrate one mechanism of pathogenesis at the molecular level. Current investigative topics are discussed in this paper.

Alzheimer's amyloid fibrils: structure and assembly

Structural studies of Alzheimer's amyloid fibrils have revealed information about the structure at different levels. The amyloid-beta peptide has been examined in various solvents and conditions and this has led to a model by which a conformational switching occurs from alpha-helix or random coil, to a beta-sheet structure. Amyloid fibril assembly proceeds by a nucleation dependent pathway leading to elongation of the fibrils. Along this pathway small oligomeric intermediates and short fibrillar structures (protofibrils) have been observed. In cross-section the fibril appears to be composed of several subfibrils or protofilaments. Each of these protofilaments is composed of beta-sheet structure in which hydrogen bonding occurs along the length of the fibre and the beta-strands run perpendicular to the fibre axis. This hierarchy of structure is discussed in this review.

Mimicry of ice structure by surface hydroxyls and water of a beta-helix antifreeze protein

Insect antifreeze proteins (AFP) are much more effective than fish AFPs at depressing solution freezing points by ice-growth inhibition. AFP from the beetle Tenebrio molitor is a small protein (8.4 kDa) composed of tandem 12-residue repeats (TCTxSxxCxxAx). Here we report its 1.4-A resolution crystal structure, showing that this repetitive sequence translates into an exceptionally regular beta-helix. Not only are the 12-amino-acid loops almost identical in the backbone, but also the conserved side chains are positioned in essentially identical orientations, making this AFP perhaps the most regular protein structure yet observed. The protein has almost no hydrophobic core but is stabilized by numerous disulphide and hydrogen bonds. On the conserved side of the protein, threonine-cysteine-threonine motifs are arrayed to form a flat beta-sheet, the putative ice-binding surface. The threonine side chains have exactly the same rotameric conformation and the spacing between OH groups is a near-perfect match to the ice lattice. Together with tightly bound co-planar external water, three ranks of oxygen atoms form a two-dimensional array, mimicking an ice section.

Folding of a synthetic parallel beta-roll protein

Recently, the design of beta-sheet proteins and concomitant folding studies have attracted increasing attention. A unique natural all-beta domain occurs in a family of cytolytic bacterial toxins, the so-called RTX toxins. This domain consists of a variable number (about 6-45) of tandem repeats of a glycine-rich nine-residue motif with the consensus sequence GGXGXDX(L/I/F)X. The analysis of the three-dimensional structure of alkaline protease from Pseudomonas aeruginosa which possesses six of these repeats revealed that they fold into a novel 'parallel beta-roll' where calcium is bound within the turns connecting the beta-strands. A 75-mer peptide of the sequence NH(2)-WLS-[GGSGNDNLS](8)-COOH was chemically synthesised. Circular dichroism spectroscopy showed that this polypeptide folds in the presence of Ca(2+) and polyethylene glycol into a beta-structure which is presumably identical with the parallel beta-roll. This synthetic beta-roll behaves similarly to the isolated beta-roll domains from Escherichia coli haemolysin or Bordetella pertussis cyclolysin in terms of calcium binding and polymerisation behaviour.

Do parallel beta-helix proteins have a unique fourier transform infrared spectrum?

Several polypeptides have been found to adopt an unusual domain structure known as the parallel beta-helix. These domains are characterized by parallel beta-strands, three of which form a single parallel beta-helix coil, and lead to long, extended beta-sheets. We have used ATR-FTIR (attenuated total reflectance-fourier transform infrared spectroscopy) to analyze the secondary structure of representative examples of this class of protein. Because the three-dimensional structures of parallel beta-helix proteins are unique, we initiated this study to determine if there was a corresponding unique FTIR signal associated with the parallel beta-helix conformation. Analysis of the amide I region, emanating from the carbonyl stretch vibration, reveals a strong absorbance band at 1638 cm(-1) in each of the parallel beta-helix proteins. This band is assigned to the parallel beta-sheet structure. However, components at this frequency are also commonly observed for beta-sheets in many classes of globular proteins. Thus we conclude that there is no unique infrared signature for parallel beta-helix structure. Additional contributions in the 1638 cm(-1) region, and at lower frequencies, were ascribed to hydrogen bonding between the coils in the loop/turn regions and amide side-chain interactions, respectively. A 13-residue peptide that forms fibrils and has been proposed to form beta-helical structure was also examined, and its FTIR spectrum was compared to that of the parallel beta-helix proteins.

Crystal structure of chondroitinase B from Flavobacterium heparinum and its complex with a disaccharide product at 1.7 A resolution

Glycosaminoglycans (GAGs) are a family of acidic heteropolysaccharides, including such molecules as chondroitin sulfate, dermatan sulfate, heparin and keratan sulfate. Cleavage of the O-glycosidic bond within GAGs can be accomplished by hydrolases as well as lyases, yielding disaccharide and oligosaccharide products. We have determined the crystal structure of chondroitinase B, a glycosaminoglycan lyase from Flavobacterium heparinum, as well as its complex with a dermatan sulfate disaccharide product, both at 1.7 A resolution. Chondroitinase B adopts the right-handed parallel beta-helix fold, found originally in pectate lyase and subsequently in several polysaccharide lyases and hydrolases. Sequence homology between chondroitinase B and a mannuronate lyase from Pseudomonas sp. suggests this protein also adopts the beta-helix fold. Binding of the disaccharide product occurs within a positively charged cleft formed by loops extending from the surface of the beta-helix. Amino acid residues responsible for recognition of the disaccharide, as well as potential catalytic residues, have been identified. Two arginine residues, Arg318 and Arg364, are found to interact with the sulfate group attached to O-4 of N-acetylgalactosamine. Cleavage of dermatan sulfate likely occurs at the reducing end of the disaccharide, with Glu333 possibly acting as the general base.

Tetrameric N(5)-(L-1-carboxyethyl)-L-ornithine synthase: guanidine. HCl-induced unfolding and a low temperature requirement for refolding

Guanidine x HCl (GdnHCl)-induced unfolding of tetrameric N(5)-(L-1-carboxyethyl)-L-ornithine synthase (CEOS; 141,300 M(r)) from Lactococcus lactis at pH 7.2 and 25 degrees C occurred in several phases. The enzyme was inactivated at approximately 1 M GdnHCl. A time-, temperature-, and concentration-dependent formation of soluble protein aggregates occurred at 0.5-1.5 M GdnHCl due to an increased exposure of apolar surfaces. A transition from tetramer to unfolded monomer was observed between 2 and 3.5 M GdnHCl (without observable dimer or trimer intermediates), as evidenced by tyrosyl and tryptophanyl fluorescence changes, sulfhydryl group exposure, loss of secondary structure, size-exclusion chromatography, and sedimentation equilibrium data. GdnHCl-induced dissociation and unfolding of tetrameric CEOS was concerted, and yields of reactivated CEOS by dilution from 5 M GdnHCl were improved when unfolding took place on ice rather than at 25 degrees C. Refolding and reconstitution of the enzyme were optimal at </=15 degrees C and yields of active tetramer increased as the concentration of unfolded subunits decreased. Refolding of unfolded subunits and active tetramer assembly upon 100-fold dilution from 5 M GdnHCl at 0 degrees C also was increased two- or fourfold (to 44 or 28% reactivation for 0.08 or 0.28 microM subunit, respectively) when incubated at 15 degrees C, pH 7.2, for 4 h with the Escherichia coli molecular chaperonin GroEL, ATP, MgCl(2), and KCl.

Mutations improving the folding of phage P22 tailspike protein affect its receptor binding activity

Four previously isolated mutations in Salmonella phage P22 tailspike protein were used to study the relationship between protein stability, folding, and function. Tailspike protein binds and hydrolyzes the repetitive O-antigen structure in Salmonella lipopolysaccharide. Four mutations (V331G, V331A, A334V, A334I) are known to increase the folding efficiency, and two of them (at position 331) also increase the thermal stability of the protein. Octasaccharides comprising two repeating units of the O-antigens from two different Salmonella strains were employed to analyze the receptor binding function of the mutant proteins. Their endorhamnosidase enzymatic activity was assayed with the aid of a fluorescence-labeled dodecasaccharide. Both V331A and V331G were found to strongly affect O-antigen binding. Octasaccharide binding affinities of the mutant proteins are reduced tenfold and 200-fold, corresponding to a loss of 17% and 36% of the standard free energy of binding, respectively. Both mutations at position 334 affected O-antigen binding only slightly (DeltaDeltaG(0)B approximately 1 kJ/mol), but these mutations reduce the thermal stability of the protein. The observed effects on the endoglycosidase activity are fully explained by the changes in substrate binding, suggesting that neither of the mutations affect the catalytic rate. Crystal structures of all four mutants were determined to a resolution of 2.0 A. Except for the partly or completely missing side-chain, no significant changes compared to the wild-type protein structure were found for the mutants at position 331, whereas a small but significant backbone displacement around the mutation site in A334V and A334I may explain the observed thermal destabilization.

A triple beta-spiral in the adenovirus fibre shaft reveals a new structural motif for a fibrous protein

Human adenoviruses are responsible for respiratory, gastroenteric and ocular infections and can serve as gene therapy vectors. They form icosahedral particles with 240 copies of the trimeric hexon protein arranged on the planes and a penton complex at each of the twelve vertices. The penton consists of a pentameric base, implicated in virus internalization, and a protruding trimeric fibre, responsible for receptor attachment. The fibres are homo-trimeric proteins containing an amino-terminal penton base attachment domain, a long, thin central shaft and a carboxy-terminal cell attachment or head domain. The shaft domain contains a repeating sequence motif with an invariant glycine or proline and a conserved pattern of hydrophobic residues. Here we describe the crystal structure at 2.4 A resolution of a recombinant protein containing the four distal repeats of the adenovirus type 2 fibre shaft plus the receptor-binding head domain. The structure reveals a novel triple beta-spiral fibrous fold for the shaft. Implications for folding of fibrous proteins (misfolding of shaft peptides leads to amyloid-like fibrils) and for the design of a new class of artificial, silk-like fibrous materials are discussed.

1.68-A crystal structure of endopolygalacturonase II from Aspergillus niger and identification of active site residues by site-directed mutagenesis

Polygalacturonases specifically hydrolyze polygalacturonate, a major constituent of plant cell wall pectin. To understand the catalytic mechanism and substrate and product specificity of these enzymes, we have solved the x-ray structure of endopolygalacturonase II of Aspergillus niger and we have carried out site-directed mutagenesis studies. The enzyme folds into a right-handed parallel beta-helix with 10 complete turns. The beta-helix is composed of four parallel beta-sheets, and has one very small alpha-helix near the N terminus, which shields the enzyme's hydrophobic core. Loop regions form a cleft on the exterior of the beta-helix. Site-directed mutagenesis of Asp(180), Asp(201), Asp(202), His(223), Arg(256), and Lys(258), which are located in this cleft, results in a severe reduction of activity, demonstrating that these residues are important for substrate binding and/or catalysis. The juxtaposition of the catalytic residues differs from that normally encountered in inverting glycosyl hydrolases. A comparison of the endopolygalacturonase II active site with that of the P22 tailspike rhamnosidase suggests that Asp(180) and Asp(202) activate the attacking nucleophilic water molecule, while Asp(201) protonates the glycosidic oxygen of the scissile bond.

Folding of coliphage T4 short tail fiber in vitro. Analysing the role of a bacteriophage-encoded chaperone

The morphogenesis of the Escherichia coli bacteriophage T4 depends on the presence of helper proteins which are not components of the mature virion. Two bacteriophage-encoded proteins, p57 and p38, are required for the assembly of the bacteriophage T4 tail fibers. In the absence of p57, two polypeptides of the long fiber (p34 and p37) and that of the short tail fiber (p12) fail to trimerize. Instead they form water-insoluble aggregates. Co-expression of the genes 12 and 57 in vivo caused the formation of only trimeric, water-soluble p12. The function of g57 cannot be replaced by overexpression of the host proteins GroEL/ES or parvulin. The mechanism of action of this helper protein has remained unknown, mainly because it has not been possible to determine its activity in vitro. Purified p12, denatured in 7 M urea, trimerized spontaneously in a slow reaction (half-time approximately 6 h) and with low yield. Upon renaturation, p12 forms native SDS-resistant trimers as indicated by spectroscopic and hydrodynamic measurements. Addition of p57 increased the rate of folding threefold and nearly doubled the yield. These experiments demonstrate that p57 acts as a molecular chaperone during folding of T4 tail fibers.

Detection of molecular interactions by using a new peptide-displaying bacteriophage biosensor

Foreign peptides fused to the carboxy terminus of P22 tailspike protein are solvent-exposed and highly antigenic when displayed on the surface of infectious virus particles. Binding of an anti-peptide specific Fab antibody fragment enhances the infectivity of chimeric bacteriophage particles in a titre-dependent fashion. Although the precise molecular basis of this enhanced infectivity remains unclear, experimental data and modelling approaches suggest that the antibody binding might restore conformational impairments in the assembled tail protein affecting its activity and performance during infection. These results suggest that in addition to free enzymes, peptide-displaying bacteriophages could be engineered as new biosensors to detect molecular interactions by using natural viral enzymes critical for cell infection.

Unfolding studies of human adenovirus type 2 fibre trimers. Evidence for a stable domain

Adenovirus fibres are trimeric proteins that protrude from the 12 fivefold vertices of the virion and are the cell attachment organelle of the virus. They consist of three segments: an N-terminal tail, which is noncovalently attached to the penton base, a thin shaft carrying 15 amino acid pseudo repeats, and a C-terminal globular head (or knob) which recognizes the primary cell receptor. Due to their exceptional stability, which allows easy distinction of native trimers from unfolded forms and folding intermediates, adenovirus fibres are a very good model system for studying folding in vivo and in vitro. To understand the folding and stability of the trimeric fibres, the unfolding pathway of adenovirus 2 fibres induced by SDS and temperature has been investigated. Unfolding starts from the N-terminus and a stable intermediate accumulates that has the C-terminal head and part of the shaft structure (shown by electron microscopy). The unfolded part can be digested away using limited proteolysis, and the precise digestion sites have been determined. The remaining structured fragment is recognized by monoclonal antibodies that are specific for the trimeric globular head and therefore retains a native trimeric structure. Taken together, our results indicate that adenovirus fibres carry a stable C-terminal domain, consisting of the knob with five shaft-repeats.

Single amino acid substitutions globally suppress the folding defects of temperature-sensitive folding mutants of phage P22 coat protein

The amino acid sequence of a polypeptide defines both the folding pathway and the final three-dimensional structure of a protein. Eighteen amino acid substitutions have been identified in bacteriophage P22 coat protein that are defective in folding and cause their folding intermediates to be substrates for GroEL and GroES. These temperature-sensitive folding (tsf) substitutions identify amino acids that are critical for directing the folding of coat protein. Additional amino acid residues that are critical to the folding process of P22 coat protein were identified by isolating second site suppressors of the tsf coat proteins. Suppressor substitutions isolated from the phage carrying the tsf coat protein substitutions included global suppressors, which are substitutions capable of alleviating the folding defects of numerous tsf coat protein mutants. In addition, potential global and site-specific suppressors were isolated, as well as a group of same site amino acid substitutions that had a less severe phenotype than the tsf parent. The global suppressors were located at positions 163, 166, and 170 in the coat protein sequence and were 8-190 amino acid residues away from the tsf parent. Although the folding of coat proteins with tsf amino acid substitutions was improved by the global suppressor substitutions, GroEL remained necessary for folding. Therefore, we believe that the global suppressor sites identify a region that is critical to the folding of coat protein.

Structural predictions of AgfA, the insoluble fimbrial subunit of Salmonella thin aggregative fimbriae

The unusually stable and multifunctional, thin aggregative fimbriae common to all Salmonella spp. are principally polymers of the fimbrin subunit, AgfA. AgfA of Salmonella enteritidis consists of two domains: a protease-sensitive, 22 amino acid residue N-terminal region and a protease-resistant, 109 residue C-terminal core. The unusual amino acid sequence of the AgfA core region comprises two-, five- and tenfold internal sequence homology patterns reflected in five conserved, 18-residue tandem repeats. These repeats have the consensus sequence, Sx5QxGx2NxAx3Q and are linked together by four or five residues, (x)xAx2. The predicted secondary structure for this unusual arrangement of tandem repeats in AgfA indicates mainly extended conformation with the beta strands linked by four to six residues. Candidate proteins of known structure with motifs of alternating beta strands and short loops were selected from folds described in SCOP as a source of coordinates for AgfA model construction. Three all-beta class motifs selected from the Serratia marcescens metalloprotease, myelin P2 protein or vitelline membrane outer protein I were used for initial AgfA homology build-up procedures ultimately resulting in three structural models; beta barrel, beta prism and parallel beta helix. The beta barrel model is a compact, albeit irregular structure, with the beta strands arranged in two antiparallel beta sheet faces. The beta prism model does not reflect the 5 or 10-fold symmetry of the AgfA primary sequence. However, the favored, parallel beta helix model is a compact coil of ten helically arranged beta strands forming two parallel beta sheet faces. This arrangement predicts a regular, potentially stable, C-terminal core region consistent with the observed tandem repeat sequences, protease-resistance and strong tendency of this fimbrin to oligomerize and aggregate. Positional conservation of amino acid residues in AgfA and the Escherichia coli AgfA homologue, CsgA, provides strong support for this model. The parallel beta helix model of AgfA offers an interesting solution to a multifunctional fimbrin molecular surface having solvent exposed areas, regions for major and minor subunit interactions as well as fiber-fiber interactions common to many bacterial fimbriae.

Formation of fibrous aggregates from a non-native intermediate: the isolated P22 tailspike beta-helix domain

In the assembly pathway of the trimeric P22 tailspike protein, the protein conformation critical for the partitioning between productive folding and off-pathway aggregation is a monomeric folding intermediate. The central domain of tailspike, a large right-handed parallel beta-helix, is essentially structured in this species. We used the isolated beta-helix domain (Bhx), expressed with a hexahistidine tag, to investigate the mechanism of aggregation without the two terminal domains present in the complete protein. Although Bhx has been shown to fold reversibly at low ionic strength conditions, increased ionic strength induced aggregation with a maximum at urea concentrations corresponding to the midpoint of urea-induced folding transitions. According to size exclusion chromatography, aggregation appeared to proceed via a linear polymerization mechanism. Circular dichroism indicated a secondary structure content of the aggregates similar to that of the native state, but at the same time their tryptophan fluorescence was largely quenched. Microscopic analysis of the aggregates revealed a variety of morphologies; among others, fibrils with fine structure were observed that exhibited bright green birefringence if viewed under cross-polarized light after staining with Congo red. These observations, together with the effects of folding mutations on the aggregation process, indicate the involvement of a partially structured intermediate distinct from both unfolded and native Bhx.

There's a right way and a wrong way: in vivo and in vitro folding, misfolding and subunit assembly of the P22 tailspike

The in vivo and in vitro folding, assembly and misfolding of an elongated protein, the thermostable tailspike adhesin of phage P22, reveals important aspects of the sequence control of chain folding as well as its failure mode, inclusion body formation.

Hydrostatic pressure rescues native protein from aggregates

Misfolding and misassembly of proteins are major problems in the biotechnology industry, in biochemical research, and in human disease. Here we describe a novel approach for reversing aggregation and increasing refolding by application of hydrostatic pressure. Using P22 tailspike protein as a model system, intermediates along the aggregation pathway were identified and quantitated by size-exclusion high-performance liquid chromatography (HPLC). Tailspike aggregates were subjected to hydrostatic pressures of 2.4 kbar (35,000 psi). This treatment dissociated the tailspike aggregates and resulted in increased formation of native trimers once pressure was released. Tailspike trimers refolded at these pressures were fully active for formation of infectious viral particles. This technique can facilitate conversion of aggregates to native proteins without addition of chaotropic agents, changes in buffer, or large-scale dilution of reagents required for traditional refolding methods. Our results also indicate that one or more intermediates at the junction between the folding and aggregation pathways is pressure sensitive. This finding supports the hypothesis that specific determinants of recognition exist for protein aggregation, and that these determinants are similar to those involved in folding to the native state. An increased understanding of this specificity should lead to improved refolding methods.

Folding and stability of mutant scaffolding proteins defective in P22 capsid assembly

Bacteriophage P22 scaffolding subunits are elongated molecules that interact through their C termini with coat subunits to direct icosahedral capsid assembly. The soluble state of the subunit exhibits a partially folded intermediate during equilibrium unfolding experiments, whose C-terminal domain is unfolded (Greene, B., and King, J. (1999) J. Biol. Chem. 274, 16135-16140). Four mutant scaffolding proteins exhibiting temperature-sensitive defects in different stages of particle assembly were purified. The purified mutant proteins adopted a similar conformation to wild type, but all were destabilized with respect to wild type. Analysis of the thermal melting transitions showed that the mutants S242F and Y214W further destabilized the C-terminal domain, whereas substitutions near the N terminus either destabilized a different domain or affected interactions between domains. Two mutant proteins carried an additional cysteine residue, which formed disulfide cross-links but did not affect the denaturation transition. These mutants differed both from temperature-sensitive folding mutants found in other P22 structural proteins and from the thermolabile temperature-sensitive mutants described for T4 lysozyme. The results suggest that the defects in these mutants are due to destabilization of domains affecting the weak subunit-subunit interactions important in the assembly and function of the virus precursor shell.

Fibril formation by amyloid-beta proteins may involve beta-helical protofibrils

We have proposed that amyloid fibrils contain subunits (protofibrils) that are formed from beta-strands wound into continuous 2-3 nm-diameter beta-helices. Subsequent lateral aggregation of the beta-helices to form the widely observed 5-12 nm-diameter fibrils could be promoted by hydrophobic residues on the exterior of the postulated beta-helix. A number of short peptide fragments of the amyloid-beta (A beta) proteins, such as A beta34-42 [LMVGGVVIA], the nine-residue, carboxyl-terminal portion of A beta1-42, can also form amyloid fibrils. In the present study, it was found that a beta-helix formed from A beta34-42 accounts for features suggested by published rotational resonance solid-state NMR data, including an anomalous conformation about the Gly-37-Gly-38 region and exaggerated pleating. An analogue of A beta34-42 was synthesized in which the hydrophobic groups on the exterior of the postulated beta-helix were replaced with glutamates, giving LEVGGVEIE. The analogue was completely soluble at pH 7, but at pH 2.5 it produced 2-2.5 nm-diameter fibrils which did not associate into larger-diameter bundles. The results of this study support the proposal that amyloid fibrils are formed from beta-helical subunits.

Cryo-electron microscopy structure of an SH3 amyloid fibril and model of the molecular packing

Amyloid fibrils are assemblies of misfolded proteins and are associated with pathological conditions such as Alzheimer's disease and the spongiform encephalopathies. In the amyloid diseases, a diverse group of normally soluble proteins self-assemble to form insoluble fibrils. X-ray fibre diffraction studies have shown that the protofilament cores of fibrils formed from the various proteins all contain a cross-beta-scaffold, with beta-strands perpendicular and beta-sheets parallel to the fibre axis. We have determined the threedimensional structure of an amyloid fibril, formed by the SH3 domain of phosphatidylinositol-3'-kinase, using cryo-electron microscopy and image processing at 25 A resolution. The structure is a double helix of two protofilament pairs wound around a hollow core, with a helical crossover repeat of approximately 600 A and an axial subunit repeat of approximately 27 A. The native SH3 domain is too compact to fit into the fibril density, and must unfold to adopt a longer, thinner shape in the amyloid form. The 20x40-A protofilaments can only accommodate one pair of flat beta-sheets stacked against each other, with very little inter-strand twist. We propose a model for the polypeptide packing as a basis for understanding the structure of amyloid fibrils in general.

cDNA cloning and characterization of sciellin, a LIM domain protein of the keratinocyte cornified envelope

Sciellin is a precursor of the cornified envelopes of mammalian keratinizing tissues. We have cloned the cDNA encoding sciellin by screening a human keratinocyte expression library with a sciellin-specific monoclonal antibody. The composite cDNA of 2.35 kilobase pairs encodes a protein of 75.3 kDa with a pI of 10.09. The translated sequence has a central domain containing 16 repeats of 20 amino acids each that is rich in Gln and Lys residues, which are potential transglutaminase substrates, and a carboxyl domain, which contains a single LIM motif. Sciellin cDNA probes hybridize to bands of 3.4 and 4.4 kilobase pairs on Northern blots of cultured human keratinocyte RNA. The gene was mapped to human chromosome band 13q22 by fluorescence in situ hybridization. Radiation hybrid mapping demonstrated that sciellin is linked to the sequence tagged site marker WI-457 with a logarithm of the odds score of 7.77. In situ hybridization of human foreskin tissue sections demonstrated that sciellin is expressed in the stratum granulosum. Immunofluorescent staining with a polyclonal rabbit antibody made to a recombinant sciellin protein showed peripheral cytoplasmic localization in the upper cell layers of epidermis and in stratified squamous epithelia such as the oral cavity, esophagus, and vagina. Simple and columnar epithelia, with the exception of the amnion, showed no reaction.

Phage P22 tailspike protein: removal of head-binding domain unmasks effects of folding mutations on native-state thermal stability

A shortened, recombinant protein comprising residues 109-666 of the tailspike endorhamnosidase of Salmonella phage P22 was purified from Escherichia coli and crystallized. Like the full-length tailspike, the protein lacking the amino-terminal head-binding domain is an SDS-resistant, thermostable trimer. Its fluorescence and circular dichroism spectra indicate native structure. Oligosaccharide binding and endoglycosidase activities of both proteins are identical. A number of tailspike folding mutants have been obtained previously in a genetic approach to protein folding. Two temperature-sensitive-folding (tsf) mutations and the four known global second-site suppressor (su) mutations were introduced into the shortened protein and found to reduce or increase folding yields at high temperature. The mutational effects on folding yields and subunit folding kinetics parallel those observed with the full-length protein. They mirror the in vivo phenotypes and are consistent with the substitutions altering the stability of thermolabile folding intermediates. Because full-length and shortened tailspikes aggregate upon thermal denaturation, and their denaturant-induced unfolding displays hysteresis, kinetics of thermal unfolding were measured to assess the stability of the native proteins. Unfolding of the shortened wild-type protein in the presence of 2% SDS at 71 degrees C occurs at a rate of 9.2 x 10(-4) s(-1). It reflects the second kinetic phase of unfolding of the full-length protein. All six mutations were found to affect the thermal stability of the native protein. Both tsf mutations accelerate thermal unfolding about 10-fold. Two of the su mutations retard thermal unfolding up to 5-fold, while the remaining two mutations accelerate unfolding up to 5-fold. The mutational effects can be rationalized on the background of the recently determined crystal structure of the protein.