Synthesis of Semiconductor Nanocrystals, Focusing on Nontoxic and Earth-Abundant Materials

Optical Properties, Synthesis, and Potential Applications of Cu-Based Ternary or Quaternary Anisotropic Quantum Dots, Polytypic Nanocrystals, and Core/Shell Heterostructures

This review summaries the optical properties, recent progress in synthesis, and a range of applications of luminescent Cu-based ternary or quaternary quantum dots (QDs). We first present the unique optical properties of the Cu-based multicomponent QDs, regarding their emission mechanism, high photoluminescent quantum yields (PLQYs), size-dependent bandgap, composition-dependent bandgap, broad emission range, large Stokes’ shift, and long photoluminescent (PL) lifetimes. Huge progress has taken place in this area over the past years, via detailed experimenting and modelling, giving a much more complete understanding of these nanomaterials and enabling the means to control and therefore take full advantage of their important properties. We then fully explore the techniques to prepare the various types of Cu-based ternary or quaternary QDs (including anisotropic nanocrystals (NCs), polytypic NCs, and spherical, nanorod and tetrapod core/shell heterostructures) are introduced in subsequent sections. To date, various strategies have been employed to understand and control the QDs distinct and new morphologies, with the recent development of Cu-based nanorod and tetrapod structure synthesis highlighted. Next, we summarize a series of applications of these luminescent Cu-based anisotropic and core/shell heterostructures, covering luminescent solar concentrators (LSCs), bioimaging and light emitting diodes (LEDs). Finally, we provide perspectives on the overall current status, challenges, and future directions in this field. The confluence of advances in the synthesis, properties, and applications of these Cu-based QDs presents an important opportunity to a wide-range of fields and this piece gives the reader the knowledge to grasp these exciting developments.

Chemical Synthesis and Applications of Colloidal Metal Phosphide Nanocrystals

Colloidal nanocrystals (NCs) have emerged as promising materials in optoelectronic devices and biological imaging application due to their tailorable properties through size, shape, and composition. Among these NCs, metal phosphide is an important class, in parallel with metal chalcogenide. In this review, we summarize the recent progress regarding the chemical synthesis and applications of colloidal metal phosphide NCs. As the most important metal phosphide NCs, indium phosphide (InP) NCs have been intensively investigated because of their low toxicity, wide and tunable emission range from visible to the near-infrared region. Firstly, we give a brief overview of synthetic strategies to InP NCs, highlighting the benefit of employing zinc precursors as reaction additive and the importance of different phosphorus precursors to improve the quality of the InP NCs, in terms of size distribution, quantum yield, colloidal stability, and non-blinking behavior. Next, we discuss additional synthetic techniques to overcome the issues of lattice mismatch in the synthesis of core/shell metal phosphide NCs, by constructing an intermediate layer between core/shell or designing a shell with gradient composition in a radial direction. We also envision future research directions of InP NCs. The chemical synthesis of other metal phosphide NCs, such as II-V metal phosphide NCs (Cd3P2, Zn3P2) and transition metal phosphides NCs (Cu3P, FeP) is subsequently introduced. We finally discuss the potential applications of colloidal metal phosphide NCs in photovoltaics, light-emitting diodes, and lithium ion battery. An overview of several key applications based on colloidal metal phosphide NCs is provided at the end.

Ultrasonication-promoted synthesis of luminescent sulfur nano-dots for cellular imaging applications

An ultrasonication-promoted strategy was proposed to synthesize luminescent sulfur nanodots, reducing the synthesis time from 5 days to several hours.

Gallium – a versatile element for tuning the photoluminescence properties of InP quantum dots

Depending on the gallium precursor, the photoluminescence of indium phosphide quantum dots is either blue- or red-shifted.

From one-dimensional to two-dimensional wurtzite CuGaS2 nanocrystals: non-injection synthesis and photocatalytic evolution

Multinary copper-based chalcogenides exhibit significant performance in photocatalytic hydrogen evolution due to their suitable optical bandgap for visible light absorption and environmentally friendly character. Herein, high-quality wurtzite CuGaS2 (CGS) nanocrystals (NCs) were synthesized by using a one-step heating-up process without any injection, and the morphology could be tuned from one-dimensional (1D) to two-dimensional (2D) by precise choice of surface ligands and gallium precursors. The formation mechanism of CGS NCs was studied comprehensively by means of the temporal-evolution of the morphology, crystal structure and optical absorption results. The reaction started from djurleite Cu31S16 NCs, and then proceeded with the formation of Cu31S16-CGS heteronanostructures (HNS), and finally the transformation from HNS to monophasic CGS nanorods took place with prolonging of the synthesis time. The optical bandgap and the energy level of the different-dimensional CGS NCs exhibited a strong dependence on the morphology change, which correlated with the percentage of the exposed {001} and {100} facets. The theoretical calculation based on density functional theory (DFT) revealed that the (001) surface facilitated the charge transport rather than the (100) surface, which was consistent with the electrochemical impedance spectroscopy (EIS) results. As a result, the 2D CGS nanoplates with more exposed {001} facets exhibited an attractive photocatalytic hydrogen production activity under simulated solar illumination as compared to 1D and quasi-2D counterparts. This study demonstrates that control over the dimension of I-III-V group semiconductor NCs could lead to a significant improvement of the photocatalytic hydrogen evolution.

Metal-enhanced fluorescence in polymer composite films with Au@Ag@SiO2 nanoparticles and InP@ZnS quantum dots

For white light-emitting diode (LED) applications, semiconductor quantum dots (QDs) have been widely utilized as efficient down-converters to change the blue color of the light source into different emission colors. Because QDs offer spectral tunability over the entire visible light range, as well as improved color purity, they have rapidly replaced conventional phosphor-based white LEDs. However, for the sustainable growth of QD-mediated LEDs, the amount of QDs required must be reduced by enhancing the color-conversion efficiency. For this purpose, we prepared poly(lauryl methacrylate) (PLMA) composite films by the photo-crosslinking polymerization of lauryl methacrylate monomers in the presence of Au@Ag@SiO2 nanoparticles (NPs) and InP@ZnS QDs. In the PLMA composites, the Au@Ag NPs not only amplified the blue light source but also modified the relaxation of the excited QDs via localized surface plasmon resonance. This resulted in a maximum 12.9-fold enhancement in the QD fluorescence. Because the blue light source in this study can be easily replaced by blue LEDs, the enhanced efficiency of QD emissions via the plasmonic effect could potentially increase the performance of QDs for display applications.

Voltammetric immunoassay of human IgG based on the release of cadmium(II) from CdS nanocrystals deposited on mesoporous silica nanospheres

The authors describe a nanocomposite that was obtained by in-situ deposition of CdS nanocrystals on mesoporous silica nanospheres (MSNs), and its use in an electrochemical immunoassay of human immunoglobulin G (HIgG). The MCN/CdS nanocomposite was covalently modified with the antibodies against HIgG and then employed in a voltammetric immunoassay at antibody-functionalized magnetic beads. Through sandwich immunoreaction, the MCN/CdS nanoprobes are quantitatively captured onto the magnetic beads where numerous Cd(II) ions are released in an acidic solution. The Cd(II) can be detected by anodic stripping voltammetry at a typical working potential of -0.78 V (vs. Ag/AgCl). In combination with the high loading of CdS on MSNs, the use of the stripping voltammetric analysis renders the method high sensitivity. A wide linear range varying from 0.01 to 100 ng mL^-1 is obtained for HIgG detection with a lower detection limit at 2.9 pg mL^-1. In addition, the preparation of the nanoprobe is inexpensive. The magnetic bead-based assay does not require complex manipulations. Therefore, this method is deemed to possess a wide scope in that it may be applied to other immunoassays. Graphical abstract Graphical Abstract contains poor quality and small text inside the artwork. Please do not re-use the file that we have rejected or attempt to increase its resolution and re-save. It is originally poor, therefore, increasing the resolution will not solve the quality problem. We suggest that you provide us the original format. We prefer replacement figures containing vector/editable objects rather than embedded images. Preferred file formats are eps, ai, tiff and pdf.A TIFF file at 900 dpi resolution of the Graphical Abstract has been attached via this online system. Schematic presentation of the preparation of the mesoporous silica nanosphere (MSN)/CdS nanocomposite for the electrochemical immunoassay of human IgG at magnetic beads. The high decoration of CdS on MSN and the stripping voltammetric analysis of Cd(II) ions render the method high sensitivity.

Inorganic semiconductor biointerfaces

Biological systems respond to and communicate through biophysical cues, such as electrical, thermal, mechanical and topographical signals. However, precise tools for introducing localized physical stimuli and/or for sensing biological responses to biophysical signals with high spatiotemporal resolution are limited. Inorganic semiconductors display many relevant electrical and optical properties, and they can be fabricated into a broad spectrum of electronic and photonic devices. Inorganic semiconductor devices enable the formation of functional interfaces with biological material, ranging from proteins to whole organs. In this Review, we discuss fundamental semiconductor physics and operation principles, with a focus on their behaviour in physiological conditions, and highlight the advantages of inorganic semiconductors for the establishment of biointerfaces. We examine semiconductor device design and synthesis and discuss typical signal transduction mechanisms at bioelectronic and biophotonic interfaces for electronic and optoelectronic sensing, optoelectronic and photothermal stimulation and photoluminescent in vivo imaging of cells and tissues. Finally, we evaluate cytotoxicity and highlight possible new material components and biological targets of inorganic semiconductor devices.

Trap Passivation in Indium-Based Quantum Dots through Surface Fluorination: Mechanism and Applications

Treatment of InP colloidal quantum dots (QDs) with hydrofluoric acid (HF) has been an effective method to improve their photoluminescence quantum yield (PLQY) without growing a shell. Previous work has shown that this can occur through the dissolution of the fluorinated phosphorus and subsequent passivation of indium on the reconstructed surface by excess ligands. In this article, we demonstrate that very significant luminescence enhancements occur at lower HF exposure though a different mechanism. At lower exposure to HF, the main role of the fluoride ions is to directly passivate the surface indium dangling bonds in the form of atomic ligands. The PLQY enhancement in this case is accompanied by red shifts of the emission and absorption peaks rather than blue shifts caused by etching as seen at higher exposures. Density functional theory shows that the surface fluorination is thermodynamically preferred and that the observed spectral characteristics might be due to greater exciton delocalization over the outermost surface layer of the InP QDs as well as alteration of the optical oscillator strength by the highly electronegative fluoride layer. Passivation of surface indium with fluorides can be applied to other indium-based QDs. PLQY of InAs QDs could also be increased by an order of magnitude via fluorination. We fabricated fluorinated InAs QD-based electrical devices exhibiting improved switching and higher mobility than those of 1,2-ethanedithiol cross-linked QD devices. The effective surface passivation eliminates persistent photoconductivity usually found in InAs QD-based solid films.

Highly Photoconductive InP Quantum Dots Films and Solar Cells

InP and InZnP colloidal quantum dots (QDs) are promising materials for application in light-emitting devices, transistors, photovoltaics, and photocatalytic cells. In addition to possessing an appropriate bandgap, high absorption coefficient, and high bulk carrier mobilities, the intrinsic toxicity of InP and InZnP is much lower than for competing QDs that contain Cd or Pb-providing a potentially safer commercial product. However, compared to other colloidal QDs, InP QDs remain sparsely used in devices and their electronic transport properties are largely unexplored. Here, we use time-resolved microwave conductivity measurements to study charge transport in films of InP and InZnP colloidal quantum dots capped with a variety of short ligands. We find that transport in InP QDs is dominated by trapping effects, which are mitigated in InZnP QDs. We improve charge carrier mobilities with a range of ligand-exchange treatments and for the best treatments reach mobilities and lifetimes on par with those of PbS QD films used in efficient solar cells. To demonstrate the device-grade quality of these films, we construct solar cells based on InP & InZnP QDs with power conversion efficiencies of 0.65 and 1.2%, respectively. This represents a large step forward in developing Cd- and Pb-free next-generation optoelectronic devices.

Sustainable scalable synthesis of sulfide nanocrystals at low cost with an ionic liquid sulfur precursor

Increasing the sustainability of nanocrystals is crucial to their application and the protection of the environment. Sulfur precursors for their synthesis are commonly obtained through multiple steps from H₂S, only to be converted back to H₂S during the synthesis of the nanocrystals. This convoluted process requires energy, reduces yields, increases waste and auxiliaries, and complicates recycling. Using H₂S directly could drastically improve sustainability, but is prevented by toxicity and handling. We here show that H₂S is stabilized by reaction with oleylamine (the most common and versatile ligand in nanoparticle synthesis) to form an ionic liquid precursor that addresses all major principles of green chemistry: it is made in one exothermic step, it leaves the reaction yielding a safer product and allowing the separate recycling of the precursors, and it produces high quality nanocrystals with high yields (sulfur yield > 70%) and concentrations (90 g L⁻¹) in ambient conditions.

Developing sustainable and scalable nanocrystal syntheses is challenging but necessary for future technologies and the environment. Here, the authors show that using an ionic liquid to stabilize a highly reactive precursor can fulfill the major aims of sustainable nanocrystal synthesis, including high yields, energy efficiency, atom economy, and recyclability.

"Green" Aqueous Synthesis and Advanced Spectral Characterization of Size-Selected Cu2ZnSnS4 Nanocrystal Inks

Structure, composition, and optical properties of colloidal mercaptoacetate-stabilized Cu2ZnSnS4 (CZTS) nanocrystal inks produced by a "green" method directly in aqueous solutions were characterized. A size-selective precipitation procedure using 2-propanol as a non-solvent allows separating a series of fractions of CZTS nanocrystals with an average size (bandgap) varying from 3 nm (1.72 eV) to 2 nm (2.04 eV). The size-selected CZTS nanocrystals revealed also phonon confinement, with the main phonon mode frequency varying by about 4 cm-1 between 2 nm and 3 nm NCs.

Colloidal Phase-Change Materials: Synthesis of Monodisperse GeTe Nanoparticles and Quantification of Their Size-Dependent Crystallization

Phase-change memory materials refer to a class of materials that can exist in amorphous and crystalline phases with distinctly different electrical or optical properties, as well as exhibit outstanding crystallization kinetics and optimal phase transition temperatures. This paper focuses on the potential of colloids as phase-change memory materials. We report a novel synthesis for amorphous GeTe nanoparticles based on an amide-promoted approach that enables accurate size control of GeTe nanoparticles between 4 and 9 nm, narrow size distributions down to 9-10%, and synthesis upscaling to reach multigram chemical yields per batch. We then quantify the crystallization phase transition for GeTe nanoparticles, employing high-temperature X-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. We show that GeTe nanoparticles crystallize at higher temperatures than the bulk GeTe material and that crystallization temperature increases with decreasing size. We can explain this size-dependence using the entropy of crystallization model and classical nucleation theory. The size-dependences quantified here highlight possible benefits of nanoparticles for phase-change memory applications.

Colloidal Phase-Change Materials: Synthesis of Monodisperse GeTe Nanoparticles and Quantification of Their Size-Dependent Crystallization

Phase-change memory materials refer to a class of materials that can exist in amorphous and crystalline phases with distinctly different electrical or optical properties, as well as exhibit outstanding crystallization kinetics and optimal phase transition temperatures. This paper focuses on the potential of colloids as phase-change memory materials. We report a novel synthesis for amorphous GeTe nanoparticles based on an amide-promoted approach that enables accurate size control of GeTe nanoparticles between 4 and 9 nm, narrow size distributions down to 9-10%, and synthesis upscaling to reach multigram chemical yields per batch. We then quantify the crystallization phase transition for GeTe nanoparticles, employing high-temperature X-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. We show that GeTe nanoparticles crystallize at higher temperatures than the bulk GeTe material and that crystallization temperature increases with decreasing size. We can explain this size-dependence using the entropy of crystallization model and classical nucleation theory. The size-dependences quantified here highlight possible benefits of nanoparticles for phase-change memory applications.

In situ study of the precursor conversion reactions during solventless synthesis of Co9S8, Ni3S2, Co and Ni nanowires

Synthesis of Co9S8, Ni3S2, Co and Ni nanowires by solventless thermolysis of a mixture of metal(ii) acetate and cysteine in vacuum is reported. The simple precursor system enables the nanowire phase to be tuned from pure metal (Co or Ni) to metal sulfide (Co9S8, Ni3S2) by varying the relative concentration of the metal(ii) acetate. The growth environment facilitates new insights through in situ characterization using field-emission scanning electron microscopy (FESEM) and thermogravimetric analysis with gas chromatography-mass spectrometry (TGA-GC-MS). Direct observation by FESEM shows the temperature at which nanowire growth occurs and suggests adatoms are incorporated into the base of the growing nanowire. TGA-GC-MS reveals the rates of precursor decomposition and identity of the volatilized ligand fragments during heat-up and at the nanowire growth temperature. Our results constitute a new approach for the selective fabrication of high quality Co9S8 and Ni3S2 nanowires and more importantly provides new understanding of precursor decomposition reactions that support symmetry-breaking growth in nanocrystals by heat-up synthesis.

Lead-free hybrid perovskites for photovoltaics

This review covers the state-of-the-art in organo-inorganic lead-free hybrid perovskites (HPs) and applications of these exciting materials as light harvesters in photovoltaic systems. Special emphasis is placed on the influence of the spatial organization of HP materials both on the micro- and nanometer scale on the performance and stability of perovskite-based solar light converters. This review also discusses HP materials produced by isovalent lead(II) substitution with Sn2+ and other metal(II) ions, perovskite materials formed on the basis of M3+ cations (Sb3+, Bi3+) as well as on combinations of M+/M3+ ions aliovalent to 2Pb2+ (Ag+/Bi3+, Ag+/Sb3+, etc.). The survey is concluded with an outlook highlighting the most promising strategies for future progress of photovoltaic systems based on lead-free perovskite compounds.

Nanostructured binary copper chalcogenides: synthesis strategies and common applications

Nanostructured binary copper chalcogenides (NBCCs) have been the subject of extensive research as promising candidates in energy-related and biological applications due to their advantageous properties, environmental compatibility, and abundance. The remarkable properties of these materials is born out of the variable stoichiometry between the copper and chalcogens, as well as the structural versatility, with zero-dimension to three-dimension structures, which consequently improves their electrical, optical, and catalytic properties. Here, the research history and development process of the binary copper chalcogenides are introduced. Typical synthesis strategies for NBCCs vary according to structure dimensionality and specific energy-related and biological applications dependent on the structure and stoichiometry are summarized. The future development of designed nanostructures and tuned stoichiometry in NBCCs for further high-performance applications are outlined.

Optical Transparency Enabled by Anomalous Stokes Shift in Visible Light-Emitting CuAlS2-Based Quantum Dots

We observe and study the anomalous Stokes shift of CuAlS₂/CdS quantum dots. While all known I-III-VI₂ semiconductor core/shell quantum dots show Stokes shifts in excess of 100 meV, the shift associated with CuAlS₂/CdS quantum dots is uniquely large, even exceeding 1.4 eV in some cases. CuAlS₂/CdS quantum dots are thus associated with cross sections less than 10^-17 cm² under the emission maximum. We investigate this anomaly using spectroscopic techniques and ascribe it to the existence of a strong type-II offset between CuAlS₂ and CdS layers. Besides their strong Stokes shift, CuAlS₂/CdS quantum dots also exhibit high quantum yields (63%) as well as long emission lifetimes (∼1500 ns). Because of the combined existence of these properties, CuAlS₂/CdS quantum dots can act as tunable, transparent emitters over the entire visible spectrum. As a demonstration of their potential, we describe the construction of a wide area transparent lighting device with waveguided optical excitation and a clear aperture of 7.5 cm².

Developing a "Water-Defendable" and "Dendrite-Free" Lithium-Metal Anode Using a Simple and Promising GeCl4 Pretreatment Method

Lithium metal is an ultimate anode in "next-generation" rechargeable batteries, such as Li-sulfur batteries and Li-air (Li-O2 ) batteries. However, uncontrollable dendritic Li growth and water attack have prevented its practical applications, especially for open-system Li-O2 batteries. Here, it is reported that the issues can be addressed via the facile process of immersing the Li metal in organic GeCl4 -THF steam for several minutes before battery assembly. This creates a 1.5 µm thick protection layer composed of Ge, GeOx , Li2 CO3 , LiOH, LiCl, and Li2 O on Li surface that allows stable cycling of Li electrodes both in Li-symmetrical cells and Li-O2 cells, especially in "moist" electrolytes (with 1000-10 000 ppm H2 O) and humid O2 atmosphere (relative humidity (RH) of 45%). This work illustrates a simple and effective way for the unfettered development of Li-metal-based batteries.

Solar light harvesting with multinary metal chalcogenide nanocrystals

The paper reviews the state of the art in the synthesis of multinary (ternary, quaternary and more complex) metal chalcogenide nanocrystals (NCs) and their applications as a light absorbing or an auxiliary component of light-harvesting systems. This includes solid-state and liquid-junction solar cells and photocatalytic/photoelectrochemical systems designed for the conversion of solar light into the electric current or the accumulation of solar energy in the form of products of various chemical reactions. The review discusses general aspects of the light absorption and photophysical properties of multinary metal chalcogenide NCs, the modern state of the synthetic strategies applied to produce the multinary metal chalcogenide NCs and related nanoheterostructures, and recent achievements in the metal chalcogenide NC-based solar cells and the photocatalytic/photoelectrochemical systems. The review is concluded by an outlook with a critical discussion of the most promising ways and challenging aspects of further progress in the metal chalcogenide NC-based solar photovoltaics and photochemistry.

Solution Processing of Hydrogen-Terminated Silicon Nanocrystal for Flexible Electronic Device

We demonstrate solution processing of hydrogen-terminated silicon nanocrystals (H-Si NCs) for flexible electronic devices. To obtain high and uniform conductivity of a solution-processed Si NC film, we adopt a perfectly dispersed colloidal H-Si NC solution. We show a high conductivity (2 × 10^-5 S/cm) of a solution-processed H-Si NC film which is spin-coated in air. The NC film (area: 100 mm²) has uniform conductivity and responds to laser irradiation with 6.8 and 24.1 μs of rise and fall time. By using time-of-flight measurements, we propose a charge transport model in the H-Si NC film. For the proof-of-concept of this study, a flexible photodetector on a polyethylene terephthalate substrate is demonstrated by spin-coating colloidal H-Si NC solution in air. The photodetector can be bent in 5.9 mm bending radius at smallest, and the device properly works after being bent in 2500 cycles.

Selective antimony reduction initiating the nucleation and growth of InSb quantum dots

Indium antimonide (InSb) quantum dots (QDs) have unique and interesting photophysical properties, but widespread experimentation with InSb QDs is lacking due to the difficulty in synthesizing this material. The key experimental challenge in fabricating InSb QDs is preparing a suitable Sb-precursor in the correct oxidation state that reacts with the In-precursor in a controllable manner. Here, we review and discuss the synthetic strategies for making colloidal InSb QDs and present a new reaction scheme yielding small (∼1 nm diameter) InSb QDs. This was accomplished by employing Sb(NMe2)3 as the antimony precursor and by screening different reducing agents that can selectively reduce it to stibine in situ. The released SbH3, subsequently, reacts with In carboxylate to form small InSb clusters. The absorption features are moderately tunable (from 400 nm to 660 nm) by the amount and rate of reductant addition as well as the temperature of injection and subsequent annealing. Optical properties were probed with transient absorption spectroscopy and show complex time and spectral dependencies.

Density gradient ultracentrifugation for colloidal nanostructures separation and investigation

In this article, we review the advancement in nanoseparation and concomitant purification of nanoparticles (NPs) by using density gradient ultracentrifugation technique (DGUC) and demonstrated by taking several typical examples. Study emphasizes the conceptual advances in classification, mechanism of DGUC and synthesis-structure-property relationships of NPs to provide the significant clue for the further synthesis optimization. Separation, concentration, and purification of NPs by DGUC can be achieved at the same time by introducing the water/oil interfaces into the separation chamber. We can develop an efficient method "lab in a tube" by introducing a reaction zone or an assembly zone in the gradient to find the surface reaction and assembly mechanism of NPs since the reaction time can be precisely controlled and the chemical environment change can be extremely fast. Finally, to achieve the best separation parameters for the colloidal systems, we gave the mathematical descriptions and computational optimized models as a new direction for making practicable and predictable DGUC separation method. Thus, it can be helpful for an efficient separation as well as for the synthesis optimization, assembly and surface reactions as a potential cornerstone for the future development in the nanotechnology and this review can be served as a plethora of advanced notes on the DGUC separation method.

Influence of Shell Thickness on the Performance of NiO-Based All-Inorganic Quantum Dot Light-Emitting Diodes

The effect of shell thickness on the performance of all-inorganic quantum dot light-emitting diodes (QLEDs) is explored by employing a series of green quantum dots (QDs) (Zn _xCd_{1- x}Se/ZnS core/shell QDs with different ZnS shell thicknesses) as the emitters. ZnO nanoparticles and sol-gel NiO are employed as the electron and hole transport materials, respectively. Time-resolved and steady-state photoluminescence results indicate that positive charging processes might occur for the QDs deposited on NiO, which results in emission quenching of QDs and poor device performance. The thick shell outside the core in QDs not only largely suppresses the QD emission quenching but also effectively preserves the excitons in QDs from dissociation of electron-hole pairs when they are subjected to an electric field. The peak efficiency of 4.2 cd/A and maximum luminance of 4205 cd/m² are achieved for the device based on QDs with the thickest shells (∼4.2 nm). We anticipate that these results will spur progress toward the design and realization of efficient all-inorganic QLEDs as a platform for the QD-based full-colored displays.

Biocompatible Semiconductor Quantum Dots as Cancer Imaging Agents

Approximately 1.7 million new cases of cancer will be diagnosed this year in the United States leading to 600 000 deaths. Patient survival rates are highly correlated with the stage of cancer diagnosis, with localized and regional remission rates that are much higher than for metastatic cancer. The current standard of care for many solid tumors includes imaging and biopsy with histological assessment. In many cases, after tomographical imaging modalities have identified abnormal morphology consistent with cancer, surgery is performed to remove the primary tumor and evaluate the surrounding lymph nodes. Accurate identification of tumor margins and staging are critical for selecting optimal treatments to minimize recurrence. Visible, fluorescent, and radiolabeled small molecules have been used as contrast agents to improve detection during real-time intraoperative imaging. Unfortunately, current dyes lack the tissue specificity, stability, and signal penetration needed for optimal performance. Quantum dots (QDs) represent an exciting class of fluorescent probes for optical imaging with tunable optical properties, high stability, and the ability to target tumors or lymph nodes based on surface functionalization. Here, state-of-the-art biocompatible QDs are compared with current Food and Drug Administration approved fluorophores used in cancer imaging and a perspective on the pathway to clinical translation is provided.

In Situ Encapsulating α-MnS into N,S-Codoped Nanotube-Like Carbon as Advanced Anode Material: α → β Phase Transition Promoted Cycling Stability and Superior Li/Na-Storage Performance in Half/Full Cells

Incorporation of N,S-codoped nanotube-like carbon (N,S-NTC) can endow electrode materials with superior electrochemical properties owing to the unique nanoarchitecture and improved kinetics. Herein, α-MnS nanoparticles (NPs) are in situ encapsulated into N,S-NTC, preparing an advanced anode material (α-MnS@N,S-NTC) for lithium-ion/sodium-ion batteries (LIBs/SIBs). It is for the first time revealed that electrochemical α → β phase transition of MnS NPs during the 1st cycle effectively promotes Li-storage properties, which is deduced by the studies of ex situ X-ray diffraction/high-resolution transmission electron microscopy and electrode kinetics. As a result, the optimized α-MnS@N,S-NTC electrode delivers a high Li-storage capacity (1415 mA h g^-1 at 50 mA g^-1 ), excellent rate capability (430 mA h g^-1 at 10 A g^-1 ), and long-term cycling stability (no obvious capacity decay over 5000 cycles at 1 A g^-1 ) with retained morphology. In addition, the N,S-NTC-based encapsulation plays the key roles on enhancing the electrochemical properties due to its high conductivity and unique 1D nanoarchitecture with excellent protective effects to active MnS NPs. Furthermore, α-MnS@N,S-NTC also delivers high Na-storage capacity (536 mA h g^-1 at 50 mA g^-1 ) without the occurrence of such α → β phase transition and excellent full-cell performances as coupling with commercial LiFePO₄ and LiNi_0.6 Co_0.2 Mn_0.2 O₂ cathodes in LIBs as well as Na₃ V₂ (PO₄ )₂ O₂ F cathode in SIBs.

Towards Low-Toxic Colloidal Quantum Dots

Colloidal quantum dots (CQDs) are of enormous interest in the scientific and engineering fields. During the past few decades, significant efforts have been conducted in investigating Cd- and Pb-based CQDs, resulting in excellent photoluminescence (PL) properties and impressive performance in various applications. But the high toxicity of Cd and Pb elements pushed the scientific community to explore low-toxic CQDs excluding poisonous heavy metals. Several semiconductor materials with lower toxicity than Cd and Pb species have been proposed. This article presents a short overview of recent efforts involving low-toxic CQDs, focusing especially on IV–VI and III–V semiconductors which are active in the near- and short-wave-infrared (IR) regimes. Recent achievements pertinent to Sn- and In-based CQDs are highlighted as representative examples. Finally, limitations and future challenges are discussed in the review.

Solvent Effects on Growth, Crystallinity, and Surface Bonding of Ge Nanoparticles

Solvent effects on the microwave-assisted synthesis of germanium nanoparticles are presented. A mixture of oleylamine and 1-dodecene was used as the reaction solvent. Oleylamine serves as a reducing agent in the synthesis while both molecules act as binding ligands. Increased concentrations of 1-dodecene in the solvent mixture were found to increase the size of the formed nanoparticles. Crystallinity was also dependent on the solvent mixture. Amorphous nanoparticles were obtained at lower 1-dodecene concentrations, whereas, at higher concentrations, particles contained crystalline and amorphous domains. 11-Methoxyundec-1-ene was synthesized to replace 1-dodecene in the reaction mixture for nuclear magnetic resonance (NMR) studies. ¹H NMR of the reaction products shows that both solvent molecules in the system act as binding ligands on the nanoparticle surface. Nanoparticles were characterized using powder X-ray diffraction, scanning transmission electron microscopy, and spectroscopy techniques (Raman, UV-vis, FT-IR, and NMR).

Purification technologies for colloidal nanocrystals

Almost all applications of colloidal nanocrystals require some type of purification or surface modification process following nanocrystal growth. Nanocrystal purification - the separation of nanocrystals from undesired solution components - can perturb the surface chemistry and thereby the physical properties of colloidal nanocrystals due to changes in solvent, solute concentrations, and exposure of the nanocrystal surface to oxidation or hydrolysis. For example, nanocrystal quantum dots frequently exhibit decreased photoluminescence brightness after precipitation from the growth solvent and subsequent redissolution. Consequently, purification is an integral part of the synthetic chemistry of colloidal nanocrystals, and the effect of purification methods must be considered in order to accurately compare and predict the behavior of otherwise similar nanocrystal samples. In this Feature Article we examine established and emerging approaches to the purification of colloidal nanoparticles from a nanocrystal surface chemistry viewpoint. Purification is generally achieved by exploiting differences in properties between the impurities and the nanoparticles. Three distinct properties are typically manipulated: polarity (relative solubility), electrophoretic mobility, and size. We discuss precipitation, extraction, electrophoretic methods, and size-based methods including ultracentrifugation, ultrafiltration, diafiltration, and size-exclusion chromatography. The susceptibility of quantum dots to changes in surface chemistry, with changes in photoluminescence decay associated with surface chemical changes, extends even into the case of core/shell structures. Accordingly, the goal of a more complete description of quantum dot surface chemistry has been a driver of innovation in colloidal nanocrystal purification methods. We specifically examine the effect of purification on surface chemistry and photoluminescence in quantum dots as an example of the challenges associated with nanocrystal purification and how improved understanding can result from increasingly precise techniques, and associated surface-sensitive analytical methods.

Nanocluster-Mediated Synthesis of Diverse ZnTe Nanostructures: from Nanocrystals to 1D Nanobelts

Liquid phase one-pot synthesis of semiconductor nanocrystals, by direct nucleation-growth crystallization, is unsuccessful for synthesis of some kinds of semiconductors. Using ZnTe as an example here, highly disperse ZnTe nanoclusters with diameters of 2-3 nm were first synthesized by a facile solvothermal method. Then the ZnTe nanoclusters were chosen as starting crystallization seeds to mediate the synthesis of flexible semiconductor nanostructures. Three-dimensional (3D) oriented assembly of ZnTe nanoclusters to monodisperse dendrimer-like nanocrystals (DLNCs), and one-dimensional (1D) ZnTe nanobelts with cubic phase, have been achieved successfully. Supported by TEM characterization of time-dependent morphology evolution, the oriented attachment assisted seed growth, based on ZnTe nanoclusters, enabled the 1D flexible ZnTe nanobelts formation, which could reach to ≈10 micrometers length.

Luminescence and photoelectrochemical properties of size-selected aqueous copper-doped Ag-In-S quantum dots

Ternary luminescent copper and silver indium sulfide quantum dots (QDs) can be an attractive alternative to cadmium and lead chalcogenide QDs. The optical properties of Cu-In-S and Ag-In-S (AIS) QDs vary over a broad range depending on the QD composition and size. The implementation of ternary QDs as emitters in bio-sensing applications can be boosted by the development of mild and reproducible syntheses directly in aqueous solutions as well as the methods of shifting the photoluminescence (PL) bands of such QDs as far as possible into the near IR spectral range. In the present work, the copper-doping of aqueous non-stoichiometric AIS QDs was found to result in a red shift of the PL band maximum from around 630 nm to ∼780 nm and PL quenching. The deposition of a ZnS shell results in PL intensity recovery with the highest quantum yield of 15%, with almost not change in the PL band position, opposite to the undoped AIS QDs. Size-selective precipitation using 2-propanol as a non-solvent allows discrimination of up to 9 fractions of Cu-doped AIS/ZnS QDs with the average sizes in the fractions varying from around 3 to 2 nm and smaller and with reasonably the same composition irrespective of the QD size. The decrease of the average QD size results in a blue PL shift yielding a series of bright luminophors with the emission color varies from deep-red to bluish-green and the PL efficiency increases from 11% for the first fraction to up to 58% for the smallest Cu-doped AIS/ZnS QDs. The rate constant of the radiative recombination of the size-selected Cu-doped AIS/ZnS QDs revealed a steady growth with the QD size decrease as a result of the size-dependent enhancement of the spatial exciton confinement. The copper doping was found to result in an enhancement of the photoelectrochemical activity of CAIS/ZnS QDs introduced as spectral sensitizers of mesoporous titania photoanodes of liquid-junction solar cells.

Stable nanoconjugates of transferrin with alloyed quaternary nanocrystals Ag-In-Zn-S as a biological entity for tumor recognition

One way to limit the negative effects of anti-tumor drugs on healthy cells is targeted therapy employing functionalized drug carriers. Here we present a biocompatible and stable nanoconjugate of transferrin anchored to Ag-In-Zn-S quantum dots modified with 11-mercaptoundecanoic acid (Tf-QD) as a drug carrier versus typical anticancer drug, doxorubicin. Detailed investigations of Tf-QD nanoconjugates without and with doxorubicin by fluorescence studies and cytotoxic measurements showed that the biological activity of both the transferrin and doxorubicin was fully retained in the nanoconjugate. In particular, the intercalation capabilities of free doxorubicin versus ctDNA remained essentially intact upon its binding to the nanoconjugate. In order to evaluate these capabilities, we studied the binding constant of doxorubicin attached to Tf-QDs with ctDNA as well as the binding site size on the ctDNA molecule. The binding constant slightly decreased compared to that of free doxorubicin while the binding site size, describing the number of consecutive DNA lattice residues involved in the binding, increased. It was also demonstrated that the QDs alone and in the form of a nanoconjugate with Tf were not cytotoxic towards human non-small cell lung carcinoma (H460 cell line) and the tumor cell sensitivity of the DOX-Tf-QD nanoconjugate was comparable to that of doxorubicin alone.

Fast and safe synthesis of micron germanium in an ammonia atmosphere using Mo2N as catalyst

Here, we reported a new method for fast and safe synthesis of a micron germanium (Ge) semiconductor. The Ge was successfully prepared from mixed GeO₂ with a low amount of MoO₃ by the NH₃ reduction method at 800 °C for an ultra-short time of 10 min. XRD patterns show that the Ge has a tetragonal structure. SEM images show that the size of the Ge particles is from 5 μm to 10 μm, and so it is on the micron scale. UV-visible diffuse reflectance spectroscopy shows that the Ge has good light absorption both in the ultraviolet and visible regions. The formation of Ge mainly goes through a two-step conversion in the NH₃ flow. Firstly, GeO₂ is converted to Ge₃N₄, and then Ge₃N₄ is decomposed to generate Ge. The comparison experiments of MoO₃ and Mo₂N demonstrate that Mo₂N is the catalyst for the Ge synthesis which improves the Ge₃N₄ decomposition. The presented fast and safe synthesis method of Ge has great potential for industrialization and the proposed Mo₂N boosting the Ge₃N₄ decomposition has provided significant guidance for other nitride decomposition systems.

Here, we reported a new method for fast and safe synthesis of a micron germanium (Ge) semiconductor.

Effect of sulfonating agent and ligand chemistry on structural and optical properties of CuSbS2 particles prepared by heat-up method

CuSbS₂ particles were prepared by a facile heat-up method to investigate the effect of sulfur source and ligand chemistry.

Synthesis, Crystal Structure, and Photoluminescent Properties of 3,3',4,4'-Tetraethyl-5,5'-divinyl-2,2'-bipyrrole Derivatives

Photoluminescent divinylbipyrroles were synthesized from 3,3′,4,4′-tetraetyl-2,2′-bipyrrole-5,5′-dicarboxaldehyde and activated methylene compounds via aldol condensation. For mechanistic clarity, molecular structures of Meldrum’s acid- and 1,3-dimethylbarbituric acid-derived divinylbipyrroles were determined by single-crystal X-ray diffraction. Photoluminescent properties of the synthesized divinylbipyrroles in dichloromethane were found to be dependent on the presence of electron withdrawing groups at the vinylic terminal. The divinylbipyrroles derived from malononitrile, Meldrum’s acid, and 1,3-dimethylbarbituric acid showed fluorescent peaks at 553, 576, and 602 nm respectively. Computational studies indicated that the alkyl substituents on the bipyrrole 3 and 3′ positions increased energy level of the highest occupied molecular orbital (HOMO) compared to the unsubstituted derivatives and provided rationale for the bathochromic shift of the ultraviolet-visible (UV-Vis) spectra compared to the previously reported analogs.