Engineered microenvironments for controlled stem cell differentiation

Three-Dimensional Assembly of Multilayered Tissues Using Water Transfer Printing

A rapid construction process is necessary to build up numerous cell modules into three-dimensional (3D) tissues that retain the tissue geometries and initial conditions of the cells. We propose a new 3D assembly technique using water transfer printing to fabricate a hollow tubular tissue structure. Utilizing this assembly technique, we discuss the relationship between the 3D transcriptional body of a gel matrix and the developed shape of transferred tissue. We then fabricate hollow tubular tissue. Simulation of the 3D environment in which tissues normally develop and function is crucial for the engineering of in vitro models that can be used for the formation of complex tissues. These artificial hollow tubular tissues could be used as in vitro simulators for drug efficiency evaluation and operative training.

MiR-17 partly promotes hematopoietic cell expansion through augmenting HIF-1α in osteoblasts

Background

Hematopoietic stem cell (HSC) regulation is highly dependent on interactions with the marrow microenvironment, of which osteogenic cells play a crucial role. While evidence is accumulating for an important role of intrinsic miR-17 in regulating HSCs and HPCs, whether miR-17 signaling pathways are also necessary in the cell-extrinsic control of hematopoiesis hereto remains poorly understood.

Methodology/Principal Findings

Using the immortalized clone with the characteristics of osteoblasts, FBMOB-hTERT, in vitro expansion, long-term culture initiating cell (LTC-IC) and non-obese diabetic/severe combined immunodeficient disease (NOD/SCID) mice repopulating cell (SRC) assay revealed that the ectopic expression of miR-17 partly promoted the ability of FBMOB-hTERT to support human cord blood (CB) CD34⁺ cell expansion and maintain their multipotency. It also seemed that osteoblastic miR-17 was prone to cause a specific expansion of the erythroid lineage. Conversely, deficient expression of miR-17 partly inhibited the hematopoietic supporting ability of FBMOB-hTERT. We further identified that HIF-1α is responsible for, at least in part, the promoted hematopoietic supporting ability of FBMOB-hTERT caused by miR-17. HIF-1α expression is markedly enhanced in miR-17 overexpressed FBMOB-hTERT upon interaction with CB CD34⁺ cells compared to other niche associated factors. More interestingly, the specific erythroid lineage expansion of CB CD34⁺ cells caused by osteoblastic miR-17 was abrogated by HIF-1α knock down.

Conclusion/Significance

Our data demonstrated that CB CD34⁺ cell expansion can be partly promoted by osteoblastic miR-17, and in particular, ectopic miR-17 can cause a specific expansion of the erythroid lineage through augmenting HIF-1α in osteoblasts.

Fabrication of functional fibronectin patterns by nanosecond excimer laser direct write for tissue engineering applications

Laser direct write techniques represent a prospective alternative for engineering a new generation of hybrid biomaterials via the creation of patterns consisting of biological proteins onto practically any type of substrate. In this paper we report on the characterization of fibronectin features obtained onto titanium substrates by UV nanosecond laser transfer. Fourier-transform infrared spectroscopy measurements evidenced no modification in the secondary structure of the post-transferred protein. The molecular weight of the transferred protein was identical to the initial fibronectin, no fragment bands being found in the transferred protein's Western blot migration profile. The presence of the cell-binding domain sequence and the mannose groups within the transferred molecules was revealed by anti-fibronectin monoclonal antibody immunolabelling and FITC-Concanavalin-A staining, respectively. The in vitro tests performed with MC3T3-E1 osteoblast-like cells and Swiss-3T3 fibroblasts showed that the cells' morphology and spreading were strongly influenced by the presence of the fibronectin spots.

Stem cell maintenance in a different niche

To overcome the difficulty of controlling stem cell fate and function in applications to regenerative medicine, a number of alternative approaches have been made. Recent reports demonstrate that a non-cellular niche modulating the biophysical microenvironment with chemical factors can support stem cell self-renewal. In our previous studies, early establishment was executed to optimize biophysical factors and it was subsequently found that the microgeometry of the extracellular matrix made huge differences in stem cell behavior and phenotype. We review here a three-dimensional, non-cellular niche designed to support stem cell self-renewal. The characteristics of stem cells under the designed system are further discussed.

Enhanced cardiomyogenic lineage differentiation of adult bone-marrow-derived stem cells grown on cardiogel

The extracellular matrix (ECM) and its components are known to promote growth and cellular differentiation in vitro. Cardiogel, a three-dimensional extracellular matrix derived from cardiac fibroblasts, is evaluated for its cardiomyogenic-differentiation-inducing potential on bone-marrow-derived stem cells (BMSC). BMSC from adult mice were grown on cardiogel and induced to differentiate into specific lineages that were validated by morphological, phenotypic and molecular assays. The data revealed that the cardiogel enhanced cardiomyogenic and adipogenic differentiation and relegated osteogenic differentiation following specific induction. More importantly, increased cardiomyogenic differentiation was also observed following BMSC growth on cardiogel without specific chemical (5-azacytidine) induction. This is the first report of an attempt to use cardiogel as a biomaterial on which to achieve cardiomyogenic differentiation of BMSC without chemical induction. Our study suggests that cardiogel is an efficient extracellular matrix that enhances the cardiomyogenic differentiation of BMSC and that it can therefore be used as a scaffold for cardiac tissue regeneration.

Human mesenchymal stem cells: a bank perspective on the isolation, characterization and potential of alternative sources for the regeneration of musculoskeletal tissues

The continuous discovery of human mesenchymal stem cells (hMSCs) in different tissues is stirring up a tremendous interest as a cell source for regenerative medicine therapies. Historically, hMSCs have been always considered a sub-population of mononuclear cells present in the bone marrow (BM). Although BM-hMSCs are still nowadays considered as the most promising mesenchymal stem cell population to reach the clinics due to their capacity to differentiate into multiple tissues, hMSCs derived from other adult and fetal tissues have also demonstrated to possess similar differentiation capacities. Furthermore, different reports have highlighted a higher recurrence of hMSCs in some of these tissues as compared to BM. This offer a fascinating panorama for cell banking, since the creation of a stem cell factory could be envisioned where hMSCs are stocked and used for ad hoc clinical applications. In this review, we summarize the main findings and state of the art in hMSCs isolation, characterization, and differentiation from alternative tissue sources and we attempt to compare their potency for musculoskeletal regeneration.

A multi-paradigm modeling framework to simulate dynamic reciprocity in a bioreactor

Despite numerous technology advances, bioreactors are still mostly utilized as functional black-boxes where trial and error eventually leads to the desirable cellular outcome. Investigators have applied various computational approaches to understand the impact the internal dynamics of such devices has on overall cell growth, but such models cannot provide a comprehensive perspective regarding the system dynamics, due to limitations inherent to the underlying approaches. In this study, a novel multi-paradigm modeling platform capable of simulating the dynamic bidirectional relationship between cells and their microenvironment is presented. Designing the modeling platform entailed combining and coupling fully an agent-based modeling platform with a transport phenomena computational modeling framework. To demonstrate capability, the platform was used to study the impact of bioreactor parameters on the overall cell population behavior and vice versa. In order to achieve this, virtual bioreactors were constructed and seeded. The virtual cells, guided by a set of rules involving the simulated mass transport inside the bioreactor, as well as cell-related probabilistic parameters, were capable of displaying an array of behaviors such as proliferation, migration, chemotaxis and apoptosis. In this way the platform was shown to capture not only the impact of bioreactor transport processes on cellular behavior but also the influence that cellular activity wields on that very same local mass transport, thereby influencing overall cell growth. The platform was validated by simulating cellular chemotaxis in a virtual direct visualization chamber and comparing the simulation with its experimental analogue. The results presented in this paper are in agreement with published models of similar flavor. The modeling platform can be used as a concept selection tool to optimize bioreactor design specifications.

A differential pressure laminar flow reactor supports osteogenic differentiation and extracellular matrix formation from adipose mesenchymal stem cells in a macroporous ceramic scaffold

We present a laminar flow reactor for bone tissue engineering that was developed based on a computational fluid dynamics model. The bioreactor design permits a laminar flow field through its specific internal shape. An integrated bypass system that prevents pressure build-up through bypass openings for pressure release allows for a constant pressure environment during the changing of permeability values that are caused by cellular growth within a porous scaffold. A macroporous ceramic scaffold, composed of zirconium dioxide, was used as a test biomaterial that studies adipose stem cell behavior within a controlled three-dimensional (3D) flow and pressure environment. The topographic structure of the material provided a basis for stem cell proliferation and differentiation toward the osteogenic lineage. Dynamic culture conditions in the bioreactor supported cell viability during long-term culture and induced cell cluster formation and extra-cellular matrix deposition within the porous scaffold, though no complete closure of the pores with new-formed tissue was observed. We postulate that our system is suitable for studying fluid shear stress effects on stem cell proliferation and differentiation toward bone formation in tissue-engineered 3D constructs.

Encapsulation and 3D culture of human adipose-derived stem cells in an in-situ crosslinked hybrid hydrogel composed of PEG-based hyperbranched copolymer and hyaluronic acid

Introduction

Cell therapy using adipose-derived stem cells has been reported to improve chronic wounds via differentiation and paracrine effects. One such strategy is to deliver stem cells in hydrogels, which are studied increasingly as cell delivery vehicles for therapeutic healing and inducing tissue regeneration. This study aimed to determine the behaviour of encapsulated adipose-derived stem cells and identify the secretion profile of suitable growth factors for wound healing in a newly developed thermoresponsive PEG–hyaluronic acid (HA) hybrid hydrogel to provide a novel living dressing system.

Methods

In this study, human adipose-derived stem cells (hADSCs) were encapsulated in situ in a water-soluble, thermoresponsive hyperbranched PEG-based copolymer (PEGMEMA–MEO₂MA–PEGDA) with multiple acrylate functional groups in combination with thiolated HA, which was developed via deactivated enhanced atom transfer radical polymerisation of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, Mn = 475), 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA) and poly(ethylene glycol) diacrylate PEGDA (Mn = 258). hADSCs embedded in the PEGMEMA–MEO₂MA–PEGDA and HA hybrid hydrogel system (P-SH-HA) were monitored and analysed for their cell viability, cell proliferation and secretion of growth factors (vascular endothelial growth factor, transforming growth factor beta and placental-derived growth factor) and cytokines (IFNγ, IL-2 and IL-10) under three-dimensional culture conditions via the ATP activity assay, alamarBlue^® assay, LIVE/DEAD^® assay and multiplex ELISA, respectively.

Results

hADSCs were successfully encapsulated in situ with high cell viability for up to 7 days in hydrogels. Although cellular proliferation was inhibited, cellular secretion of growth factors such as vascular endothelial growth factor and placental-derived growth factor production increased over 7 days, whereas IL-2 and IFNγ release were unaffected.

Conclusion

This study indicates that hADSCs can be maintained in a P-SH-HA hydrogel, and secrete pro-angiogenic growth factors with low cytotoxicity. With the potential to add more functionality for further structural modifications, this stem cell hydrogel system can be an ideal living dressing system for wound healing applications.

TCF3, a novel positive regulator of osteogenesis, plays a crucial role in miR-17 modulating the diverse effect of canonical Wnt signaling in different microenvironments

Wnt signaling pathways are a highly conserved pathway, which plays an important role from the embryonic development to bone formation. The effect of Wnt pathway on osteogenesis relies on their cellular environment and the expression of target genes. However, the molecular mechanism of that remains unclear. On the basis of the preliminary results, we observed the contrary effect of canonical Wnt signaling on osteogenic differentiation of periodontal ligament stem cells (PDLSCs) in the different culture environment. Furthermore, we found that the expression level of miR-17 was also varied with the change in the culture environment. Therefore, we hypothesized that miR-17 and canonical Wnt signaling may have potential interactions, particularly the inner regulation relationship in different microenvironments. In this paper, we observed that canonical Wnt signaling promoted osteogenesis of PDLSCs in the fully culture medium, while inhibited it in the osteogenic differentiation medium. Interestingly, alteration in the expression level of endogenous miR-17 could partially reverse the different effect of canonical Wnt signaling. Furthermore, the role of miR-17 was because of its target gene TCF3 (transcription factor 3), a key transcription factor of canonical Wnt pathway. Overexpression of TCF3 attenuated the effect of miR-17 on modulating canonical Wnt signaling. Finally, we elucidated that TCF3 enhanced osteogenesis both in vitro and in vivo. In brief, the different level of miR-17 was the main cause of the different effect of canonical Wnt signaling, and TCF3 was the crucial node of miR-17–canonial Wnt signaling regulation loop. This understanding of microRNAs regulating signaling pathways in different microenvironments may pave the way for fine-tuning the process of osteogenesis in bone-related disorders.

The advantages of three-dimensional culture in a collagen hydrogel for stem cell differentiation

We evaluated the advantages of three-dimensional (3D) culture in a collagen hydrogel for stem cell differentiation, including the morphology of differentiated cells, differentiation efficiency of stem cells from aged rat and cells after passaging and freeze/thawing. Rat mesenchymal stem cells (MSCs) from young and aged rats, and MSCs after passaging and freeze/thawing were induced to differentiate into osteoblasts in 3D and 2D cultures, and histological studies were performed. Differentiation efficiency was evaluated by markers of osteoblastic differentiation including Runx2 and osterix gene expressions, osteocalcin secretion and calcium deposition. MSCs were stained positive for alkaline phosphatase in 3D and 2D cultures. However, the morphology of differentiated cells in 3D culture, which was different from that in 2D culture, was similar to that of osteoblasts in vivo. Markers of osteoblastic differentiation in MSCs from aged rats in 3D culture were higher than those in MSCs from young rats in 2D culture. Markers of osteoblastic differentiation in MSCs after passaging and freeze/thawing in 3D culture were higher than those in nonpassaged MSCs in 2D culture. These results indicate that 3D culture in a collagen hydrogel has advantages for the differentiation of MSCs into osteoblasts with a similar phenotype to that of in vivo, when using even MSCs from aged donors or after passaging and freeze/thawing.

The effects of interactive mechanical and biochemical niche signaling on osteogenic differentiation of adipose-derived stem cells using combinatorial hydrogels

Stem cells reside in a multi-factorial environment containing biochemical and mechanical signals. Changing biochemical signals in most scaffolds often leads to simultaneous changes in mechanical properties, which makes it difficult to elucidate the complex interplay between niche cues. Combinatorial studies on cell-material interactions have emerged as a tool to facilitate analyses of stem cell responses to various niche cues, but most studies to date have been performed on two-dimensional environments. Here we developed three-dimensional combinatorial hydrogels with independent control of biochemical and mechanical properties to facilitate analysis of interactive biochemical and mechanical signaling on adipose-derived stem cell osteogenesis in three dimensions. Our results suggest that scaffold biochemical and mechanical signals synergize only at specific combinations to promote bone differentiation. Leading compositions were identified to have intermediate stiffness (∼55kPa) and low concentration of fibronectin (10μg ml(-1)), which led to an increase in osteocalcin gene expression of over 130-fold. Our results suggest that scaffolds with independently tunable niche cues could provide a powerful tool for conducting mechanistic studies to decipher how complex niche cues regulate stem cell fate in three dimensions, and facilitate rapid identification of optimal niche cues that promote desirable cellular processes or tissue regeneration.

A bio-inspired platform to modulate myogenic differentiation of human mesenchymal stem cells through focal adhesion regulation

The use of human mesenchymal stem cells (hMSCs) in cardiac-tissue engineering has gained widespread attention and many reports have shown that matrix compliance, micro/nano-patterns could be some of the important biophysical cues that drive hMSCs differentiation. Regardless of the type of biophysical induction cues, cells mainly explore their environment via focal adhesion (FA) and FA plays an important role in many cellular behaviours. Therefore, it is hypothesized that FA modulation through materials manipulation could be an important cue for modulation that would result in the stem cell lineage commitment. In this work, the FA of hMSCs is modulated by a novel microcontact printing method using polyvinyl alcohol as a trans-print media which can successfully print proteins on soft polydimethylsiloxane (PDMS). The FA is successfully modified into dense FA and elongated FA by micropatterning square and rectangular patterns on 12.6 kPa PDMS respectively. Additionally, the combined effects of stiffness of PDMS substrates (hard (308 kPa), intermediate (12.6 kPa)) and FA patterning on hMSCs differentiation are studied. The results indicate that dense FA does not induce myogenesis while elongated FA can promote cytoskeleton alignment and further myogenesis on PDMS with intermediate stiffness of 12.6 kPa. However, on stiff substrate (308 kPa), with or without patterns, the cytoskeleton alignment and myogenesis are not obvious. This demonstrates for the first time that it is possible to induce the differentiation of hMSCs by regulating the FA using a materials platform even in the absence of any biochemical factors. It also shows that there is a synergistic effect between FA regulation and matrix stiffness that results in a more specific and higher up-regulated myogenesis. This platform presents a new chemical/biological-free method to engineer the myogenic differentiation of hMSCs.

Stem cell microencapsulation for phenotypic control, bioprocessing, and transplantation

Cell microencapsulation has been utilized for decades as a means to shield cells from the external environment while simultaneously permitting transport of oxygen, nutrients, and secretory molecules. In designing cell therapies, donor primary cells are often difficult to obtain and expand to appropriate numbers, rendering stem cells an attractive alternative due to their capacities for self-renewal, differentiation, and trophic factor secretion. Microencapsulation of stem cells offers several benefits, namely the creation of a defined microenvironment which can be designed to modulate stem cell phenotype, protection from hydrodynamic forces and prevention of agglomeration during expansion in suspension bioreactors, and a means to transplant cells behind a semi-permeable barrier, allowing for molecular secretion while avoiding immune reaction. This review will provide an overview of relevant microencapsulation processes and characterization in the context of maintaining stem cell potency, directing differentiation, investigating scalable production methods, and transplanting stem cells for clinically relevant disorders.

Substrates and supplements for hESCs: a critical review

BACKGROUND

Different laboratories around the world have succeeded in establishing human embryonic stem cell (hESC) lines. However, culture conditions vary considerably among the protocols used and the vast majority of the lines at some stage of their creation have been in contact with an animal derived component. One of the main problems to be overcome for the generation of a clinical-grade hESC line is the choice of a substrate and medium that allows derivation and culture, where animal derived components are kept to a minimum or completely excluded.

MATERIALS AND METHODS

The following review describes past and more recent achievements in the creation and culturing of hESC. It describes protocols, giving special attention to the matrices and supplements used for derivation, maintainance and cryostorage, considering whether they included defined, undefined and/or animal-derived components in their formulations.

CONCLUSION

This information shall be useful for the creation and choice of new substrates and supplements for future research in the field of hESC for therapeutic purposes.

Resilin-Like Polypeptide Hydrogels Engineered for Versatile Biological Functions

Natural resilin, the rubber-like protein that exists in specialized compartments of most arthropods, possesses excellent mechanical properties such as low stiffness, high resilience and effective energy storage. Recombinantly-engineered resilin-like polypeptides (RLPs) that possess the favorable attributes of native resilin would be attractive candidates for the modular design of biomaterials for engineering mechanically active tissues. Based on our previous success in creating a novel RLP-based hydrogel and demonstrating useful mechanical and cell-adhesive properties, we have produced a suite of new RLP-based constructs, each equipped with 12 repeats of the putative resilin consensus sequence and a single, distinct biologically active domain. This approach allows independent control over the concentrations of cell-binding, MMP-sensitive, and polysaccharide-sequestration domains in hydrogels comprising mixtures of the various RLPs. The high purity, molecular weight and correct compositions of each new polypeptide have been confirmed via high performance liquid chromatography (HPLC), sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), and amino acid analysis. These RLP-based polypeptides exhibit largely random-coil conformation, both in solution and in the cross-linked hydrogels, as indicated by circular dichroic and infrared spectroscopic analyses. Hydrogels of various compositions, with a range of elastic moduli (1kPa to 25kPa) can be produced from these polypeptides, and the activity of the cell-binding and matrix metalloproteinase (MMP) sensitive domains was confirmed. Tris(hydroxymethyl phosphine) cross-linked RLP hydrogels were able to maintain their mechanical integrity as well as the viability of encapsulated primary human mesenchymal stem cells (MSCs). These results validate the promising properties of these RLP-based elastomeric biomaterials.

Microfluidic devices for cell cultivation and proliferation

Microfluidic technology provides precise, controlled-environment, cost-effective, compact, integrated, and high-throughput microsystems that are promising substitutes for conventional biological laboratory methods. In recent years, microfluidic cell culture devices have been used for applications such as tissue engineering, diagnostics, drug screening, immunology, cancer studies, stem cell proliferation and differentiation, and neurite guidance. Microfluidic technology allows dynamic cell culture in microperfusion systems to deliver continuous nutrient supplies for long term cell culture. It offers many opportunities to mimic the cell-cell and cell-extracellular matrix interactions of tissues by creating gradient concentrations of biochemical signals such as growth factors, chemokines, and hormones. Other applications of cell cultivation in microfluidic systems include high resolution cell patterning on a modified substrate with adhesive patterns and the reconstruction of complicated tissue architectures. In this review, recent advances in microfluidic platforms for cell culturing and proliferation, for both simple monolayer (2D) cell seeding processes and 3D configurations as accurate models of in vivo conditions, are examined.

The expanding world of tissue engineering: the building blocks and new applications of tissue engineered constructs

The field of tissue engineering has been growing in the recent years as more products have made it to the market and as new uses for the engineered tissues have emerged, motivating many researchers to engage in this multidisciplinary field of research. Engineered tissues are now not only considered as end products for regenerative medicine, but also have emerged as enabling technologies for other fields of research ranging from drug discovery to biorobotics. This widespread use necessitates a variety of methodologies for production of tissue engineered constructs. In this review, these methods together with their non-clinical applications will be described. First, we will focus on novel materials used in tissue engineering scaffolds; such as recombinant proteins and synthetic, self assembling polypeptides. The recent advances in the modular tissue engineering area will be discussed. Then scaffold-free production methods, based on either cell sheets or cell aggregates will be described. Cell sources used in tissue engineering and new methods that provide improved control over cell behavior such as pathway engineering and biomimetic microenvironments for directing cell differentiation will be discussed. Finally, we will summarize the emerging uses of engineered constructs such as model tissues for drug discovery, cancer research and biorobotics applications.

The differentiation of MSCs into functional hepatocyte-like cells in a liver biomatrix scaffold and their transplantation into liver-fibrotic mice

Hepatocytes derived from mesenchymal stem cells (MSCs) hold great potential for cell-based therapies for liver diseases. The cell-based therapies are critically dependent on the hepatic differentiation of the MSCs with a high efficiency and on a considerable scale. Recent results have shown that decellularized organs provide a three-dimensional extracellular matrix for the lineage restriction of stem cell maturation. In this study, we compared the cell proliferation and hepatic differentiation of murine MSCs in a biomatrix scaffold from rat liver and in the presence and absence growth factors (GF) with a two-dimensional substrate. In the absence or presence of GF, the dynamic cultured scaffold (DCS) stimulated the MSCs to express endodermal and hepatocyte-specific genes and proteins associated with improved functions, and the cells exhibited the ultrastructural characteristics of mature hepatocytes. When transplanted into CCl(4)-injured mice, the cells pretreated with a combination of the DCS and GF exhibited increased survival, liver function, engraftment into the host liver and further hepatic differentiation. The paracrine effect of the transplanted cells on hepatic stellate cells and native hepatocytes played a key role in the treatment of the liver pathology. These studies define an effective method that facilitates the hepatic differentiation of MSCs exhibiting extensive functions and support further research into the use of a decellularized liver matrix as a bioscaffold for liver tissue engineering.

A naturally derived cardiac extracellular matrix enhances cardiac progenitor cell behavior in vitro

Myocardial infarction (MI) produces a collagen scar, altering the local microenvironment and impeding cardiac function. Cell therapy is a promising therapeutic option to replace the billions of myocytes lost following MI. Despite early successes, chronic function remains impaired and is likely a result of poor cellular retention, proliferation, and differentiation/maturation. While some efforts to deliver cells with scaffolds have attempted to address these shortcomings, they lack the natural cues required for optimal cell function. The goal of this study was to determine whether a naturally derived cardiac extracellular matrix (cECM) could enhance cardiac progenitor cell (CPC) function in vitro. CPCs were isolated via magnetic sorting of c-kit(+) cells and were grown on plates coated with either cECM or collagen I (Col). Our results show an increase in early cardiomyocyte markers on cECM compared with Col, as well as corresponding protein expression at a later time. CPCs show stronger serum-induced proliferation on cECM compared with Col, as well as increased resistance to apoptosis following serum starvation. Finally, a microfluidic adhesion assay demonstrated stronger adhesion of CPCs to cECM compared with Col. These data suggest that cECM may be optimal for CPC therapeutic delivery, as well as providing potential mechanisms to overcome the shortcomings of naked cell therapy.

Chemical and physical properties of regenerative medicine materials controlling stem cell fate

Regenerative medicine is a multidisciplinary field utilizing the potential of stem cells and the regenerative capability of the body to restore, maintain, or enhance tissue and organ functions. Stem cells are unspecialized cells that can self-renew but also differentiate into several somatic cells when subjected the appropriate environmental cues. The ability to reliably direct stem cell fate would provide tremendous potential for basic research and clinical therapies. Proper tissue function and regeneration rely on the spatial and temporal control of biophysical and biochemical cues, including soluble molecules, cell-cell contacts, cell-extracellular matrix contacts, and physical forces. The mechanisms involved remain poorly understood. This review focuses on the stem cell-extracellular matrix interactions by summarizing the observations of the effects of material variables (such as overall architecture, surface topography, charge, ζ-potential, surface energy, and elastic modulus) on the stem cell fate. It also deals with the mechanisms underlying the effects of these extrinsic, material variables. Insight in the environmental interactions of the stem cells is crucial for the development of new material-based approaches for cell culture experiments and future experimental and clinical regenerative medicine applications.

Controlling self-renewal and differentiation of stem cells via mechanical cues

The control of stem cell response in vitro, including self-renewal and lineage commitment, has been proved to be directed by mechanical cues, even in the absence of biochemical stimuli. Through integrin-mediated focal adhesions, cells are able to anchor onto the underlying substrate, sense the surrounding microenvironment, and react to its properties. Substrate-cell and cell-cell interactions activate specific mechanotransduction pathways that regulate stem cell fate. Mechanical factors, including substrate stiffness, surface nanotopography, microgeometry, and extracellular forces can all have significant influence on regulating stem cell activities. In this paper, we review all the most recent literature on the effect of purely mechanical cues on stem cell response, and we introduce the concept of "force isotropy" relevant to cytoskeletal forces and relevant to extracellular loads acting on cells, to provide an interpretation of how the effects of insoluble biophysical signals can be used to direct stem cells fate in vitro.

High-efficiency matrix modulus-induced cardiac differentiation of human mesenchymal stem cells inside a thermosensitive hydrogel

Mesenchymal stem cells (MSCs) experience an extremely low rate of cardiac differentiation after transplantation into infarcted hearts, in part due to the inability of stiff scar tissue to support differentiation. We hypothesized that delivering MSCs in a hydrogel with a modulus matched to that of native heart tissue should stimulate MSC differentiation into cardiac cells. We have developed a thermosensitive and injectable hydrogel suitable for the delivery of cells into the heart, and found that the appropriate gel modulus can differentiate MSCs into cardiac cells with high efficiency. The hydrogel was based on N-isopropylacrylamide, N-acryloxysuccinimide, acrylic acid and poly(trimethylene carbonate)-hydroxyethyl methacrylate. The hydrogel solution can be readily injected through needles commonly used for heart injection, and is capable of gelling within 7s at 37°C. The formed gels were highly flexible, with breaking strains (>300%) higher than that of native heart tissue and moduli within the range of native heart tissue (1-140 kPa). Controlling the concentration of the hydrogel solution resulted in hydrogels with three different moduli: 16, 45 and 65 kPa. The moduli were decoupled from the gel water content and oxygen diffusion, parameters that can also influence cell differentiation. MSCs survived in the hydrogels throughout the entire culture period, and it was observed that gel stiffness did not affect cell survival. After 14 days of culture, more than 76% of MSCs had differentiated into cardiac cells in the 45 and 65 kPa gels, as confirmed by the expression of cardiac markers at both the gene and protein levels. MSCs in the hydrogel with the 65 kPa modulus had the highest differentiation efficiency. The differentiated cells also developed calcium channels that imparted an electrophysiological property, and gap junctions for cell-cell communication. The efficiency of differentiation reported in this study was much higher than for the differentiation approaches described in the literature, such as chemical induction and co-culture of MSCs and cardiomyocytes. These results indicate that the novel hydrogel holds great promise for delivering MSCs into an infarcted heart for the generation of new heart tissue.

The role of perfusion bioreactors in bone tissue engineering

Tissue engineering has emerged as a possible alternative to current treatments for bone injuries and defects. However, the common tissue engineering approach presents some obstacles to the development of functional tissues, such as insufficient nutrient and metabolite transport and non-homogenous cell distribution. Culture of bone cells in three-dimensional constructs in bioreactor systems is a solution for those problems as it improves mass transport in the culture system. For bone tissue engineering spinner flasks, rotating wall vessels and perfusion systems have been investigated, and based on these, variations that support cell seeding and mechanical stimulation have also been researched. This review aims at providing an overview of the concepts, advantages and future applications of bioreactor systems for bone tissue engineering with emphasis on the design of different perfusion systems and parameters that can be optimized.

Microwell regulation of pluripotent stem cell self-renewal and differentiation

The fates of pluripotent stem cells (PSCs), including survival, self-renewal, and differentiation, are regulated by chemical and mechanical cues presented in the three-dimensional (3D) microenvironment. Most PSC studies have been performed on two-dimensional substrates. However, 3D culture systems have demonstrated the importance of intercellular interactions in regulating PSC self-renewal and differentiation. Microwell culture systems have been developed to generate homogenous PSC colonies of defined sizes and shapes and to study how colony morphology affects cell fate. Using microwells, researchers have demonstrated that PSCs remain in a self-renewing undifferentiated state as a result of autocrine and paracrine signaling. Other studies have shown that microwell regulation of embryoid body size affects lineage commitment during differentiation via cell-cell contact and expression of soluble signals. In this review, we discuss recent advances in the design and utilization of 3D microwell platforms for studying intercellular regulation of PSC cell fate decisions and the underlying molecular mechanisms.

Osteogenic differentiation and mineralization in fibre-reinforced tubular scaffolds: theoretical study and experimental evidences

The development of composite scaffolds with well-organized architecture and multi-scale properties (i.e. porosity, degradation) represents a valid approach for achieving a tissue-engineered construct capable of reproducing the medium- and long-term in vitro behaviour of hierarchically complex tissues such as spongy bone. To date, the implementation of scaffold design strategies able to summarize optimal scaffold architecture as well as intrinsic mechanical, chemical and fluid transport properties still remains a challenging issue. In this study, poly ε-caprolactone/polylactid acid (PCL/PLA) tubular devices (fibres of PLA in a PCL matrix) obtained by phase inversion/salt leaching and filament winding techniques were proposed as cell instructive scaffold for bone osteogenesis. Continuous fibres embedded in the polymeric matrix drastically improved the mechanical response as confirmed by compression elastic moduli, which vary from 0.214 ± 0.065 to 1.174 ± 0.143 MPa depending on the relative fibre/matrix and polymer/solvent ratios. Moreover, computational fluid dynamic simulations demonstrated the ability of composite structure to transfer hydrodynamic forces during in vitro culture, thus indicating the optimal flow rate conditions that, case by case, enables specific cellular events-i.e. osteoblast differentiation from human mesenchymal stem cells (hMSCs), mineralization, etc. Hence, we demonstrate that the hMSC differentiation preferentially occurs in the case of higher perfusion rates-over 0.05 ml min(-1)-as confirmed by the expression of alkaline phosphate and osteocalcin markers. In particular, the highest osteopontin values and a massive mineral phase precipitation of bone-like phases detected in the case of intermediate flow rates (i.e. 0.05 ml min(-1)) allows us to identify the best condition to stimulate the bone extracellular matrix in-growth, in agreement with the hydrodynamic model prediction. All these results concur to prove the succesful use of tubular composite as temporary device for long bone treatment.

The physics of tissue formation with mesenchymal stem cells

Cells react to various forms of physical phenomena that promote and maintain the formation of tissues. The best example of this are cells of musculoskeletal origin, such as mesenchymal stem cells (MSCs), which consistently proliferate or differentiate under cues from hydrostatic pressure, diffusive mass transport, shear stress, surface chemistry, mechanotransduction, and molecular kinetics. To date, no other cell type shows greater receptiveness to macroscopic and microscopic cues, highlighting the acute sensitivity of MSCs and the importance of physical principles in tissue homeostasis. In this review, we describe the literature that has shown how physical phenomena govern MSCs biology and provide insight into the mechanisms and strategies that can spur new biotechnological applications with tissue biology.

Regulation of autocrine fibroblast growth factor-2 signaling by perfusion flow in 3D human mesenchymal stem cell constructs

Perfusion bioreactor systems play a crucial role in mitigating nutrient limitation as well as providing biomechanical stimuli and redistributing regulatory macromolecules that influence human mesenchymal stem cells (hMSC) fate in three-dimensional (3D) scaffolds. As fibroblast growth factor-2 (FGF-2) is known to regulate hMSC phenotype, understanding the role of autocrine FGF-2 signaling in the 3D construct under the different perfusion flow provides important insight into an optimal bioreactor design. To investigate FGF-2 signaling inhibition in hMSC cultured in the porous poly(ethylene terephthalate) (PET) scaffolds perfused under two flow configurations, PD173074, an FGFR1 inhibitor, was added in growth media after 7 day of pre-culture and its impact on hMSC proliferation and clonogenicity during the subsequent 7 days of cultivation was analyzed. Compared with control constructs in growth media, the addition of PD173074 resulted in significant reduction in hMSC proliferation and colony formation in both constructs with a more dramatic reduction in the parallel flow constructs. The results demonstrate that autocrine FGF-2 plays a significant role in 3D scaffold and suggest modulation of the perfusion flow in the bioreactor as a strategy to influence autocrine actions and cell fate in the 3D scaffold.

Electrophysiological and contractile function of cardiomyocytes derived from human embryonic stem cells

Human embryonic stem cells have emerged as the prototypical source from which cardiomyocytes can be derived for use in drug discovery and cell therapy. However, such applications require that these cardiomyocytes (hESC-CMs) faithfully recapitulate the physiology of adult cells, especially in relation to their electrophysiological and contractile function. We review what is known about the electrophysiology of hESC-CMs in terms of beating rate, action potential characteristics, ionic currents, and cellular coupling as well as their contractility in terms of calcium cycling and contraction. We also discuss the heterogeneity in cellular phenotypes that arises from variability in cardiac differentiation, maturation, and culture conditions, and summarize present strategies that have been implemented to reduce this heterogeneity. Finally, we present original electrophysiological data from optical maps of hESC-CM clusters.

3D polylactide-based scaffolds for studying human hepatocarcinoma processes in vitro

We evaluated the combination of leaching techniques and melt blending of polymers and particles for the preparation of highly interconnected three-dimensional polymeric porous scaffolds for in vitro studies of human hepatocarcinoma processes. More specifically, sodium chloride and poly(ethylene glycol) (PEG) were used as water-soluble porogens to form porous and solvent-free poly(L,D-lactide) (PLA)-based scaffolds. Several characterization techniques, including porosimetry, image analysis and thermogravimetry, were combined to improve the reliability of measurements and mapping of the size, distribution and microarchitecture of pores. We also investigated the effect of processing, in PLA-based blends, on the simultaneous bulk/surface modifications and pore architectures in the scaffolds, and assessed the effects on human hepatocarcinoma viability and cell adhesion. The influence of PEG molecular weight on the scaffold morphology and cell viability and adhesion were also investigated. Morphological studies indicated that it was possible to obtain scaffolds with well-interconnected pores of assorted sizes. The analysis confirmed that SK-Hep1 cells adhered well to the polymeric support and emitted surface protrusions necessary to grow and differentiate three-dimensional systems. PEGs with higher molecular weight showed the best results in terms of cell adhesion and viability.

Bioreactor strategy in bone tissue engineering: pre-culture and osteogenic differentiation under two flow configurations

Since robust osteogenic differentiation and mineralization are integral to the engineering of bone constructs, understanding the impact of the cellular microenvironments on human mesenchymal stem cell (hMSCs) osteogenic differentiation is crucial to optimize bioreactor strategy. Two perfusion flow conditions were utilized in order to understand the impact of the flow configuration on hMSC construct development during both pre-culture (PC) in growth media and its subsequent osteogenic induction (OI). The media in the in-house perfusion bioreactor was controlled to perfuse either around (termed parallel flow [PF]) the construct surfaces or penetrate through the construct (termed transverse flow [TF]) for 7 days of the PC followed by 7 days of the OI. The flow configuration during the PC not only changed growth kinetics but also influenced cell distribution and potency of osteogenic differentiation and mineralization during the subsequent OI. While shear stress resulted from the TF stimulated cell proliferation during PC, the convective removal of de novo extracellular matrix (ECM) proteins and growth factors (GFs) reduced cell proliferation on OI. In contrast, the effective retention of de novo ECM proteins and GFs in the PC constructs under the PF maintained cell proliferation under the OI but resulted in localized cell aggregations, which influenced their osteogenic differentiation. The results revealed the contrasting roles of the convective flow as a mechanical stimulus, the redistribution of the cells and macromolecules in 3D constructs, and their divergent impacts on cellular events, leading to bone construct formation. The results suggest that the modulation of the flow configuration in the perfusion bioreactor is an effective strategy that regulates the construct properties and maximizes the functional outcome.

A method to integrate patterned electrospun fibers with microfluidic systems to generate complex microenvironments for cell culture applications

The properties of a cell's microenvironment are one of the main driving forces in cellular fate processes and phenotype expression invivo. The ability to create controlled cell microenvironments invitro becomes increasingly important for studying or controlling phenotype expression in tissue engineering and drug discovery applications. This includes the capability to modify material surface properties within well-defined liquid environments in cell culture systems. One successful approach to mimic extra cellular matrix is with porous electrospun polymer fiber scaffolds, while microfluidic networks have been shown to efficiently generate spatially and temporally defined liquid microenvironments. Here, a method to integrate electrospun fibers with microfluidic networks was developed in order to form complex cell microenvironments with the capability to vary relevant parameters. Spatially defined regions of electrospun fibers of both aligned and random orientation were patterned on glass substrates that were irreversibly bonded to microfluidic networks produced in poly-dimethyl-siloxane. Concentration gradients obtained in the fiber containing channels were characterized experimentally and compared with values obtained by computational fluid dynamic simulations. Velocity and shear stress profiles, as well as vortex formation, were calculated to evaluate the influence of fiber pads on fluidic properties. The suitability of the system to support cell attachment and growth was demonstrated with a fibroblast cell line. The potential of the platform was further verified by a functional investigation of neural stem cell alignment in response to orientation of electrospun fibers versus a microfluidic generated chemoattractant gradient of stromal cell-derived factor 1 alpha. The described method is a competitive strategy to create complex microenvironments invitro that allow detailed studies on the interplay of topography, substrate surface properties, and soluble microenvironment on cellular fate processes.

Laser direct-write of single microbeads into spatially-ordered patterns

Fabrication of heterogeneous microbead patterns on a bead-by-bead basis promotes new opportunities for sensors, lab-on-a-chip technology and cell-culturing systems within the context of customizable constructs. Laser direct-write (LDW) was utilized to target and deposit solid polystyrene and stem cell-laden alginate hydrogel beads into computer-programmed patterns. We successfully demonstrated single-bead printing resolution and fabricated spatially-ordered patterns of microbeads. The probability of successful microbead transfer from the ribbon surface increased from 0 to 80% with decreasing diameter of 600 to 45 µm, respectively. Direct-written microbeads retained spatial pattern registry, even after 10 min of ultrasonication treatment. SEM imaging confirmed immobilization of microbeads. Viability of cells encapsulated in transferred hydrogel microbeads achieved 37 ± 11% immediately after the transfer process, whereas randomly-patterned pipetted control beads achieved a viability of 51 ± 25%. Individual placement of >10 µm diameter microbeads onto planar surfaces has previously been unattainable. We have demonstrated LDW as a valuable tool for the patterning of single, micrometer-diameter beads into spatially-ordered patterns.

Gel microstructure regulates proliferation and differentiation of MC3T3-E1 cells encapsulated in alginate beads

For cell transplantation into damaged tissues, viable cells must be delivered to the defect site in a suitable carrier. However, the hypoxic and nutrient-limited environment in the carrier can induce massive cell death. The aims of this study were to increase the viability and regulate the behavior of osteoprogenitor cells encapsulated in alginate hydrogels through control of the gel microstructure. Cell survivability in alginate beads was improved through the use of α-MEM as the solvent for alginic acid sodium salt, and by CaCl(2) solutions, which supplied additional nutrients for the cells compared to water or buffer. The mesh size and shear modulus of the hydrogel were hypothesized to regulate proliferation and differentiation of osteoprogenitor cells. MC3T3-E1 cells demonstrated enhanced osteoblast differentiation when encapsulated in high-density alginate with smaller mesh size and more rigid mechanical properties, as confirmed by increased alkaline phosphatase activity and osteocalcin secretion. However, MC3T3-E1 cells encapsulated in low-density alginate beads with a larger mesh size and more compliant mechanical properties exhibited increased proliferation. These results demonstrate that the microstructure of alginate hydrogels can regulate the behavior of osteoprogenitor cells, thus suggesting that the tuning the properties of the gel may be a useful approach for enhancing new bone formation.

Microfibrous substrate geometry as a critical trigger for organization, self-renewal, and differentiation of human embryonic stem cells within synthetic 3-dimensional microenvironments

Substrates used to culture human embryonic stem cells (hESCs) are typically 2-dimensional (2-D) in nature, with limited ability to recapitulate in vivo-like 3-dimensional (3-D) microenvironments. We examined critical determinants of hESC self-renewal in poly-d-lysine-pretreated synthetic polymer-based substrates with variable microgeometries, including planar 2-D films, macroporous 3-D sponges, and microfibrous 3-D fiber mats. Completely synthetic 2-D substrates and 3-D macroporous scaffolds failed to retain hESCs or support self-renewal or differentiation. However, synthetic microfibrous geometries made from electrospun polymer fibers were found to promote cell adhesion, viability, proliferation, self-renewal, and directed differentiation of hESCs in the absence of any exogenous matrix proteins. Mechanistic studies of hESC adhesion within microfibrous scaffolds indicated that enhanced cell confinement in such geometries increased cell-cell contacts and altered colony organization. Moreover, the microfibrous scaffolds also induced hESCs to deposit and organize extracellular matrix proteins like laminin such that the distribution of laminin was more closely associated with the cells than the Matrigel treatment, where the laminin remained associated with the coated fibers. The production of and binding to laminin was critical for formation of viable hESC colonies on synthetic fibrous scaffolds. Thus, synthetic substrates with specific 3-D microgeometries can support hESC colony formation, self-renewal, and directed differentiation to multiple lineages while obviating the stringent needs for complex, exogenous matrices. Similar scaffolds could serve as tools for developmental biology studies in 3-D and for stem cell differentiation in situ and transplantation using defined humanized conditions.

Process engineering of human pluripotent stem cells for clinical application

Human pluripotent stem cells (hPSCs), including embryonic and induced pluripotent stem cells, constitute an extremely attractive tool for cell therapy. However, flexible platforms for the large-scale production and storage of hPSCs in tightly controlled conditions are necessary to deliver high-quality cells in relevant quantities to satisfy clinical demands. Here we discuss the main principles for the bioprocessing of hPSCs, highlighting the impact of environmental factors, novel 3D culturing approaches and integrated bioreactor strategies for controlling hPSC culture outcome. Knowledge on hPSC bioprocessing accumulated during recent years provides important insights for the establishment of more robust production platforms and should potentiate the implementation of novel hPSC-based therapies.

Laser Direct-Write of Embryonic Stem Cells and Cells Encapsulated in Alginate Beads for Engineered Biological Constructs

The ability to control the deposition of mouse embryonic stem cells (mESCs), and mESCs encapsulated in 200-μm diameter alginate microbeads, into customized patterns has recently been achieved using laser direct-write (LDW). Gelatin-based LDW was utilized to target and reproducibly deposit groups of cells directly onto receiving substrate surfaces. Live/dead staining for cell viability and immunocytochemistry for the pluripotency marker, Oct-4, indicated that transferred mESCs were viable following transfer, and maintained an important embryonic stem cell marker, respectively. LDW was further used to print mESCs encapsulated in hydrogel microbeads into customized patterns on a single-bead basis. Recent efforts have also achieved patterns of discrete co-cultures of mESCs and breast cancer cells in separate hydrogel microbeads. Altogether, we demonstrated the feasibility of LDW to print patterns of mESCs and mESC-microbeads for the biomimetic assembly of engineered cellular constructs and tissue models.

Microfabricated biomaterials for engineering 3D tissues

Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.

Bioengineering heart muscle: a paradigm for regenerative medicine

The idea of extending the lifetime of our organs is as old as humankind, fueled by major advances in organ transplantation, novel drugs, and medical devices. However, true regeneration of human tissue has become increasingly plausible only in recent years. The human heart has always been a focus of such efforts, given its notorious inability to repair itself following injury or disease. We discuss here the emerging bioengineering approaches to regeneration of heart muscle as a paradigm for regenerative medicine. Our focus is on biologically inspired strategies for heart regeneration, knowledge gained thus far about how to make a "perfect" heart graft, and the challenges that remain to be addressed for tissue-engineered heart regeneration to become a clinical reality. We emphasize the need for interdisciplinary research and training, as recent progress in the field is largely being made at the interfaces between cardiology, stem cell science, and bioengineering.

Organs-on-chips: breaking the in vitro impasse

In vitro models of biological tissues are indispensable tools for unraveling human physiology and pathogenesis. They usually consist of a single layer of a single cell type, which makes them robust and suitable for parallelized research. However, due to their simplicity, in vitro models are also less valid as true reflections of the complex biological tissues of the human body. Even though the realism of the models can be increased by including more cell types, this will inevitably lead to a decrease in robustness and throughput. The constant trade-off between realism and simplicity has led to an impasse in the development of new in vitro models. Organs-on-chips, a class of microengineered in vitro tissue models, have the potential to break the in vitro impasse. These models combine an artificially engineered, physiologically realistic cell culture microenvironment with the potential for parallelization and increased throughput. They are robust, because the engineered physiological, organ-level features such as tissue organization, geometry, soluble gradients and mechanical stimulation are well-defined and controlled. Moreover, their microfluidic properties and integrated sensors pave the way for high-throughput studies. In this review, we define the in vitro impasse, we explain why organs-on-chips have the potential to break the impasse and we formulate a view on the future of the field. We focus on the design philosophy of organs-on-chips, the integration of technology and biology and on how to connect to the potential end-users.