Light-driven motion of liquids on a photoresponsive surface

Biological and Engineered Topological Droplet Rectifiers

The power of the directional and spontaneous transport of liquid droplets is revealed through ubiquitous biological processes and numerous practical applications, where droplets are rectified to achieve preferential functions. Despite extensive progress, the fundamental understanding and the ability to exploit new strategies to rectify droplet transport remain elusive. Here, the latest progress in the fundamental understanding as well as the development of engineered droplet rectifiers that impart superior performance in a wide variety of working conditions, ranging from low temperature, ambient temperature, to high temperature, is discussed. For the first time, a phase diagram is formulated that naturally connects the droplet dynamics, including droplet formation modes, length scales, and phase states, with environmental conditions. Parallel approaches are then taken to discuss the basic physical mechanisms underlying biological droplet rectifiers, and a variety of strategies and manufacturing routes for the development of robust artificial droplet rectifiers. Finally, perspectives on how to create novel man-made rectifiers with functionalities beyond natural counterparts are presented.

Self-Propelled Motion of a Camphor Disk on a Photosensitive Amphiphilic Molecular Layer

We have studied the self-propelled motion of a camphor disk on a 2,2'-bis(2-chlorophenyl)-4,4',5,5'-tetraphenyl-1,2'-biimidazole ( o-Cl-HABI) molecular layer, which was developed on water, as a photomechanical sensing system. The o-Cl-HABI dimer changed to its monomeric form upon UV light irradiation, and as a result, the surface pressure of the o-Cl-HABI molecular layer decreased. The reciprocating motion of a camphor disk in the absence of UV light irradiation was observed at A = 45 Ų molecule^-1, of which the surface pressure was ∼10 mN m^-1. Random motion was observed under UV light irradiation at A = 45 Ų molecule^-1, of which the surface pressure was ∼5 mN m^-1. Therefore, the nature of motion of a camphor disk changes depending on the photosensitivity of the o-Cl-HABI molecular layer. We have discussed the mechanism of the change in the motion of the camphor disk in relation to the photoreaction of the o-Cl-HABI molecular layer with the surface pressure acting as the driving force.

Light-Switching Azo-Copolymers Self-Assembly in Multi-Stationary States

In the present research, novel tri-block-copolymers bearing polyethylene glycol (PEG), azobenzene (Azo), and tetra-ortho-methoxy-substituted Azo (mAzo) segments are synthesized and explored. Light-controlled PEG-PmAzo-PAzo self-assemblies switching between multi-stationary states is realized. Under controlling of UV, blue, green, and red light, PEG-PmAzo-PAzo isomerize between 4 photostationary states. The enrichment of cis isomers of Azo and mAzo induces the self-assembly of PEG-PmAzo-PAzo in toluene. The morphologies and scale of the self-assemblies can be switched between four stationary states, which are investigated by dynamic light scattering, scanning electron microscopy, and transmission electron microscopy.

Vapor-induced motion of two pure liquid droplets

The movement of evaporating liquid droplets on a surface can be triggered by the Marangoni effect arising from heterogeneities in the surface tension or a gradient in the surface energy of the substrate. Here, we show that, on a high energy surface that remains uniform, the motion of two pure liquid droplets can be induced by a gradient in the liquid vapor resulting from evaporation. The droplets always attract each other, moving from the high evaporation side to the low evaporation side, to reduce energy dissipation. By varying the volume of the droplets or the distance between droplets, the motion of the droplets can be effectively controlled.

Designing biomimetic liquid diodes

Just as the innovation of electronic diodes that allow the current to flow in one direction provides a foundation for the development of digital technologies, the engineering of surfaces or devices that allow the directional and spontaneous transport of fluids, termed liquid diodes, is highly desired in a wide spectrum of applications ranging from medical microfluidics, advanced printing, heat management and water collection to oil-water separation. Recent advances in manufacturing, visualization techniques, and biomimetics have led to exciting progress in the design of various liquid diodes. In spite of exciting progress, formulating a general framework broad enough to guide the design, optimization and fabrication of engineered liquid diodes remains a challenging task to date. In this review, we first present an overview of the development of biological and engineered liquid diodes to elucidate how to control the surface chemistry and topography to regulate the transport of liquids without the need for external energy. Then the latest design strategies allowing for the creation of longitudinal and transverse liquid diodes are discussed and compared. We also define some figures of merit such as the rectification coefficient and the transport velocity and distance to quantify the performance of liquid diodes. Finally, we highlight perspectives on the development of engineered liquid diodes that transcend nature and adapt to various practical applications.

Aminoazobenzene@Ag modified meshes with large extent photo-response: towards reversible oil/water removal from oil/water mixtures

A large-extent photo-responsive wettability transformation is realized by aminoazobenzene@Ag to selectively remove oil/water.

Photo-responsive materials with superwetting properties, especially in the azo-based class, have been used in water treatment because of their smart performance on wettability changes. However, their transformation extent in wettability has always troubled researchers. Here, we modified nano-Ag pine needles and aminoazobenzene (AABN) on polydopamine (PDA) pre-treated porous meshes, realizing a large-extent reversible photo-responsive wettability transformation from highly hydrophobic to highly hydrophilic. The contact angle is about 150.0° after being exposed to visible light, and is about 10.0° under 365 nm UV light. Accordingly, the modified mesh can achieve photo-responsive removal between oil and water from oil/water mixtures. This facile and universal approach based on trans–cis isomerization of AABN could be endowed to various commercial conductive meshes. Moreover, the modified meshes exhibit satisfactory removal efficiency, reusability and physical/chemical stability, which are more promising for practical applications such as fuel recycling, remote controlled oil/water separation and astronautical resource regeneration.

Directional pumping of water and oil microdroplets on slippery surface

Transporting water and oil microdroplets is important for applications ranging from water harvesting to biomedical analysis but remains a great challenge. This is due to the amplified contact angle hysteresis and insufficient driving force in the micrometer scale, especially for low-surface energy oil droplets. Coalescence of neighboring droplets, which releases vast additional surface energy, was often required, but its relatively uncontrollable nature brings uncertainties to the droplet motion, and the methodology is not applicable to single droplets. Here we introduce a strategy based on slippery surface with immobilized lubricant menisci to directionally transport microdroplets. By simply mounting hydrogel dots on slippery surface, the raised menisci remotely pump microdroplets via capillary force with high efficiency, regardless of droplet size or surface energy. By proof-of-concept experiments, we demonstrate that our method allows for highly efficient water droplet collection and highly sensitive biomedical analyte detection.

Control of structural flexibility of layered-pillared metal-organic frameworks anchored at surfaces

Flexible metal-organic frameworks (MOFs) are structurally flexible, porous, crystalline solids that show a structural transition in response to a stimulus. If MOF-based solid-state and microelectronic devices are to be capable of leveraging such structural flexibility, then the integration of MOF thin films into a device configuration is crucial. Here we report the targeted and precise anchoring of Cu-based alkylether-functionalised layered-pillared MOF crystallites onto substrates via stepwise liquid-phase epitaxy. The structural transformation during methanol sorption is monitored by in-situ grazing incidence X-ray diffraction. Interestingly, spatially-controlled anchoring of the flexible MOFs on the surface induces a distinct structural responsiveness which is different from the bulk powder and can be systematically controlled by varying the crystallite characteristics, for instance dimensions and orientation. This fundamental understanding of thin-film flexibility is of paramount importance for the rational design of MOF-based devices utilising the structural flexibility in specific applications such as selective sensors.

Capillarity-driven migration of small objects: A critical review

The phenomena on the capillarity-driven migration of small objects are full of interest for both scientific and engineering communities, and a critical review is thereby presented. The small objects mentioned here deal with the non-deformable objects, such as particles, rods, disks and metal sheets; and besides them, the soft objects are considered, such as droplets and bubbles. Two types of interfaces are analyzed, i.e., the solid-fluid interface and the fluid-fluid interface. Due to the easily deformable properties of the soft objects and distorted interfacial shapes induced by small objects, a more convenient way to obtain the driving force is through the potential energy of the system. The asymmetric factors causing the object migration include the asymmetric configuration of the interface, and the difference between the interfacial tensions. Finally, a simple outlook on the potential applications of small object migration is made. These behaviors may cast new light on the design of microfluidics and new devices, environment cleaning, oil and gas displacement and mineral industries.

Directed motion of water droplets on multi-gradient photopolymer surfaces

Rapid and directional movement of water droplets across a photopolymer surface with inscribed wettability and Laplace pressure gradient is demonstrated.

Effect of moderate magnetic fields on the surface tension of aqueous liquids: a reliable assessment

We precisely measure the effect of moderate magnetic field intensity on the surface tension of liquids, by placing pendant drops inside uniform fields where bulk forces due to gradients are eliminated. The surface tension of water is unaffected while that of paramagnetic salt solutions slightly decreases with increasing field strength.

A novel setup measures the effect of magnetic field intensities on the surface tension of liquids placed inside uniform fields.

Stability of functionalized platform molecules on Au(111)

Trioxatriangulenium (TOTA) platform molecules were functionalized with methyl, ethyl, ethynyl, propynyl, and hydrogen and sublimated onto Au(111) surfaces. Low-temperature scanning tunneling microscopy data reveal that >99% of ethyl-TOTA and methyl-TOTA remain intact, whereas 60% of H-TOTA and >99% of propynyl-TOTA and ethynyl-TOTA decompose. The observed tendency toward fragmentation on Au(111) is opposite to the sequence of gas-phase stabilities of the molecules. Although Au(111) is the noblest of all metal surfaces, the binding energies of the decomposition products to Au(111) destabilize the functionalized platforms by 2 to 3.9 eV (190-370 kJ/mol) and even render some of them unstable as revealed by density functional theory calculations. Van der Waals forces are important, as they drive the adsorption of the platform molecules.

Self-propelled droplet-based electricity generation

Droplets are ubiquitous in nature and the preferential control of droplet transport offers limitless potential for efficient mass and momentum transfer as well as energy conversion. In this work, we show that even without the need for any external energy input, the self-propelled motion of droplets driven by a surface wetting gradient can lead to reliable electricity generation. Simple analytical analysis demonstrates that the output voltage results from the modulation of the surface charge distribution on the dynamically changing solid/liquid interfaces, which can be programmed by tailoring the wetting gradient and the size of the droplet. We demonstrate that a self-propelled 25 μL droplet can generate a peak current of 93.5 nA and a maximum output power of 2.4 nW. This work provides a new angle for optimizing energy harvesting devices based on liquid-solid interfaces.

Directional Droplet Propulsion on Gradient Boron Nitride Nanosheet Grid Surface Lubricated with a Vapor Film below the Leidenfrost Temperature

Controlled propulsion of liquid droplets on a solid surface offers important applications in various fields, including fog harvesting, heat transfer, microfluidics, and microdevice technologies. The propulsion of the liquid droplet is realized only if the driven force exceeds the resistance force. Sometimes the directional propulsion of droplets only takes place at the Leidenfrost state to achieve enough lubrication for a vapor cushion. The thick vapor cushions levitate liquid droplets to reduce resistance force. However, it is still challenging to reduce the vapor cushion thickness and simultaneously realize the directional droplet's motion, especially below the Leidenfrost temperature. Here, a structurally hydrophobic boron nitride nanosheet (BNNS) grid surface was constructed with a two-direction topographical gradient, i. e., the perpendicular altitude gradient and the horizontal density gradient. The polar nature of the B-N bonds results in intrinsic hydrophilicity of the boron nitride layer, which increases the Leidenfrost point and facilitates wetting even at high temperature. Much thinner vapor-lubricating layers are competent in the droplet's directional motion below the Leidenfrost temperature of the BNNS grid surface because the air gap trapped within boron nitride nanosheet grids acts as a part of the lubrication layer.

Preparation of reversible photoresponsive N-hydroxyethyl spiropyran/polyacrylonitrile fiber materials with mechanical stability by electrospinning for regulating wettability and humidity automatically

Novel photoresponsive N-hydroxyethyl spiropyran (SP-OH)/polyacrylonitrile (PAN) fiber materials with reversible changes in wettability and humidity were prepared by electrospinning in this work. SP-OH and PAN were mixed through a physical doping method. The wettability and humidity regulation of the electrospun films can be reversibly manipulated by the simple change of ultraviolet (UV)-visible (UV-Vis) light irradiation due to the photoisomerization mechanism of the spiropyran chromophore. Under UV light irradiation, SP-OH molecules exhibit a colored polar open-ring status, resulting in electrostatic attraction with water. However, under visible light irradiation, they are colorless and nonpolar and lose the attraction effect. Wettability and ambient humidity were regulated by this repeated transformation between polar surface and nonpolar surface. The tensile strength and the reversible change ranges of wettability and humidity under UV-Vis irradiation are all closely related to the doping amount of SP-OH. Electrospinning is a promising method to achieve large-scale production that can put such a material into practical application.

Surface Modification Based on Diselenide Dynamic Chemistry: Towards Liquid Motion and Surface Bioconjugation

Surface modification is an important technique in fields, such as, self-cleaning, surface patterning, sensing, and detection. The diselenide bond was shown to be a dynamic covalent bond that can undergo a diselenide metathesis reaction simply under visible light irradiation. Herein we develop this diselenide dynamic chemistry into a versatile surface modification method with a fast response and reversibility. The diselenide bond could be modified onto various substrates, such as, PDMS, quartz, and ITO conductive film glass. Different functional diselenide molecules could then be immobilized onto the surface via diselenide metathesis reaction. We demonstrated that by using this modification method we could achieve liquid motion in a capillary tube under light illumination. We also show that this approach has the potential to serve as an efficient modification method for surface bioconjugation, which has practical applications in clinical usage.

Re- and Preconfigurable Multistable Visible Light Responsive Surface Topographies

Light responsive materials that are able to change their shape are becoming increasingly important. However, preconfigurable bistable or even multi-stable visible light responsive coatings have not been reported yet. Such materials will require less energy to actuate and will have a longer lifetime. Here, it is shown that fluorinated azobenzenes can be used to create rewritable and pre-configurable responsive surfaces that show multi-stable topographies. These surface structures can be formed and removed by using low intensity green and blue light, respectively. Multistable preconfigured surface topographies can also be created in the absence of a mask. The method allows for full control over the surface structures as the topographical changes are directly linked to the molecular isomerization processes. Preliminary studies reveal that these light responsive materials are suitable as adaptive biological surfaces.

Bacteriorhodopsin-Inspired Light-Driven Artificial Molecule Motors for Transmembrane Mass Transportation

In nature, biological machines and motors can selectively transport cargoes across the lipid membranes to efficiently perform various physiological functions via ion channels or ion pumps. It is interesting and challengeable to develop artificial motors and machines of nanodimensions to controllably regulate mass transport in compartmentalized systems. In this work, we show a system of artificial molecular motors that uses light energy to perform transmembrane molecule transport through synthetical nanochannels. After functionalizing the polymer nanochannels with azobenzene derivatives, these nanomachines exhibit autonomous selective transport behavior over a long distance upon simultaneous irradiation with UV (365 nm) and visible (430 nm) light. With new strategies or suitable materials for directed molecular movement, such device can be regarded as a precursor of artificial light-driven molecular pumps.

Numerical Demonstration of In-Tube Liquid-Column Migration Driven by Photoisomerization

Droplet manipulation by light-induced isomerization was numerically demonstrated and investigated regarding the driving mechanism. Such a non-invasive manipulation of a droplet in a microchannel can be realized, for example, by the use of watery solution of photoresponsive surfactant that exhibits the isomerization. Due to variable fluid properties between the cis and trans isomers, one-side light irradiation on a liquid column in a tube would lead to some kind of imbalance between the two ends of the liquid column and then drive droplet migration. The present numerical simulations of air⁻liquid two-phase flow and its scalar transport of the isomer, considering the variable static contact angle, agreed quantitatively with the experimental results in terms of the migration speed. This fact supports the contention that the droplet migration is more likely to be driven by an imbalance in the wettability, or the contact angle. The migration speed was found to be less dependent on the liquid-column length, but proportional to the tube diameter.

Loss-Free Photo-Manipulation of Droplets by Pyroelectro-Trapping on Superhydrophobic Surfaces

Manipulation of tiny amounts of liquid is a fundamental technique for miniaturized diagnostic, analyzing, and synthetic processes. Among diverse maneuver methods, light-controlled liquid manipulation stands out because of its ready controllability, high spatial precision, and noncontact feature of light. As light controls the motion of liquid droplets, substantial liquid loss frequently accompanies, leading to reduced sample volume, contaminated devices, and erroneous results. Here, we report a light-controlled droplet-maneuver method based on pyroelectro-trapping on superhydrophobic surfaces. On such a platform, a light source traps and guides the droplet on a nonwetting surface remotely, offering a precise and loss-free droplet transport that eliminates intersample cross-contaminations. Our approach provides a simplified, facile, and compact platform which is suitable for repeated and multistep usages. Droplet-based microreactions and enhanced mixing inside tiny droplets are effectively demonstrated using the platform. The photocontrolled loss-free droplet maneuver is very promising for applications like chemical/bioassays, microfluidics, and liquid transfer.

Reconfiguring surface functions using visible-light-controlled metal-ligand coordination

Most surfaces are either static or switchable only between “on” and “off” states for a specific application. It is a challenge to develop reconfigurable surfaces that can adapt to rapidly changing environments or applications. Here, we demonstrate fabrication of surfaces that can be reconfigured for user-defined functions using visible-light-controlled Ru–thioether coordination chemistry. We modify substrates with Ru complex Ru-H₂O. To endow a Ru-H₂O-modified substrate with a certain function, a functional thioether ligand is immobilized on the substrate via Ru–thioether coordination. To change the surface function, the immobilized thioether ligand is cleaved from the substrate by visible-light-induced ligand dissociation, and then another thioether ligand with a distinct function is immobilized on the substrate. Different thioethers endow the surface with different functions. Based on this strategy, we rewrite surface patterns, manipulate protein adsorption, and control surface wettability. This strategy enables the fabrication of reconfigurable surfaces with customizable functions on demand.

Configuring surfaces on-demand for desired functionalities is an ongoing challenge. Here, diverse and tailorable modifications of quartz and porous silica surfaces that are rapidly and reversibly switchable by the use of visible light are achieved via ruthenium-thioether coordination.

Inorganic Surface Coating with Fast Wetting-Dewetting Transitions for Liquid Manipulations

Liquid manipulation is a fundamental issue for microfluidics and miniaturized sensors. Fast wetting-state transitions by optical methods have proven being efficient for liquid manipulations by organic surface coatings, however rarely been achieved by using inorganic coatings. Here, we report a fast optical-induced wetting-state transition surface achieved by inorganic coating, enabling tens of second transitions for a wetting-dewetting cycle, shortened from an hour, as typically reported. Here, we demonstrate a gravity-driven microfluidic reactor and switch it to a mixer after a second-step exposure in a minimum of within 80 s of UV exposure. The fast wetting-dewetting transition surfaces enable the fast switchable or erasable smart surfaces for water collection, miniature chemical reaction, or sensing systems by using inorganic surface coatings.

Transport velocity of droplets on ratchet conveyors

Anisotropic ratchet conveyors (ARC) are a type of digital microfluidic system. Unlike electrowetting based systems, ARCs transport droplets through a passive, micro-patterned surface and applied orthogonal vibrations. The mechanics of droplet transport on ARC devices has yet to be as well characterized and understood as on electrowetting systems. In this work, we investigate how the design of the ARC substrate affects the droplet response to vibrations and perform the first characterization of transport velocity on ARC devices. We discovered that the design of the ARC device has a significant effect on both the transport efficiency and velocity of actuated droplets, and that the amplitude of the applied vibration can modulate the velocity of transported droplets. Finally, we show that the movement of droplet edges is not continuous but rather the sum of quantized steps between features of the ARC device. These results provide new insights into the behavior of droplets vibrated on asymmetric surface patterns and will serve as the foundation for the design and development of future lab-on-a-chip systems.

Synthesis, Structural Characterization, and Luminescence Switching of Diarylethene-Conjugated Ru(II)-Terpyridine Complexes by trans-cis Photoisomerization: Experimental and DFT/TD-DFT Investigation

We synthesized and thoroughly characterized a new family of diarylethene-conjugated mononuclear Ru(II)-terpyridine complexes and investigated in detail their photophysical, electrochemical, and spectroelectrochemical behaviors. Interestingly, the compounds show moderately strong room-temperature luminescence predominantly from their ³MLCT state with luminescence lifetime varying between 8.43 and 22.82 ns. Because of the presence of diarylethene unit, all the monometallic complexes underwent trans-to-cis photoisomerization upon interaction with UV light with substantial changes in their absorption and luminescence spectra. Reverting back from the cis to the trans form is also made possible upon treatment with visible light or by heat. Trans-to-cis isomerization leads to almost complete quenching of luminescence, while backward cis-to-trans isomerization gives rise to restoration of the original luminescence for all the complexes. Thus, "on-off" and "off-on" emission switching was made possible upon successive interaction of the complexes with UV and visible light. Computational investigation involving density functional theory (DFT) and time-dependent DFT methods was done for proper assignment of the experimental absorption and emission spectral bands in the complexes. Finally, experimentally observed trend on the absorption and emission spectral behaviors of the complexes upon photoisomerization was also compared with the calculated results.

Orthogonal photo-switching of supramolecular patterned surfaces

We used Azo/α-CD and ipAzo/γ-CD host-guest complexes to demonstrate that four independent stable states can be orthogonally photo-switched by UV (365 nm), blue (470 nm), green (530 nm) and red light (625 nm). A supramolecular patterned surface was fabricated and orthogonally photo-switched by light with different wavelengths.

Light-driven micro/nanomotors: from fundamentals to applications

Light, as an external stimulus, is capable of driving the motion of micro/nanomotors (MNMs) with the advantages of reversible, wireless and remote manoeuvre on demand with excellent spatial and temporal resolution. This review focuses on the state-of-the-art light-driven MNMs, which are able to move in liquids or on a substrate surface by converting light energy into mechanical work. The general design strategies for constructing asymmetric fields around light-driven MNMs to propel themselves are introduced as well as the photoactive materials for light-driven MNMs, including photocatalytic materials, photothermal materials and photochromic materials. Then, the propulsion mechanisms and motion behaviors of the so far developed light-driven MNMs are illustrated in detail involving light-induced phoretic propulsion, bubble recoil and interfacial tension gradient, followed by recent progress in the light-driven movement of liquid crystalline elastomers based on light-induced deformation. An outlook is further presented on the future development of light-driven MNMs towards overcoming key challenges after summarizing the potential applications in biomedical, environmental and micro/nanoengineering fields.

From dynamic self-assembly to networked chemical systems

Although dynamic self-assembly, DySA, is a relatively new area of research, the past decade has brought numerous demonstrations of how various types of components - on scales from (macro)molecular to macroscopic - can be arranged into ordered structures thriving in non-equilibrium, steady states. At the same time, none of these dynamic assemblies has so far proven practically relevant, prompting questions about the field's prospects and ultimate objectives. The main thesis of this Review is that formation of dynamic assemblies cannot be an end in itself - instead, we should think more ambitiously of using such assemblies as control elements (reconfigurable catalysts, nanomachines, etc.) of larger, networked systems directing sequences of chemical reactions or assembly tasks. Such networked systems would be inspired by biology but intended to operate in environments and conditions incompatible with living matter (e.g., in organic solvents, elevated temperatures, etc.). To realize this vision, we need to start considering not only the interactions mediating dynamic self-assembly of individual components, but also how components of different types could coexist and communicate within larger, multicomponent ensembles. Along these lines, the review starts with the discussion of the conceptual foundations of self-assembly in equilibrium and non-equilibrium regimes. It discusses key examples of interactions and phenomena that can provide the basis for various DySA modalities (e.g., those driven by light, magnetic fields, flows, etc.). It then focuses on the recent examples where organization of components in steady states is coupled to other processes taking place in the system (catalysis, formation of dynamic supramolecular materials, control of chirality, etc.). With these examples of functional DySA, we then look forward and consider conditions that must be fulfilled to allow components of multiple types to coexist, function, and communicate with one another within the networked DySA systems of the future. As the closing examples show, such systems are already appearing heralding new opportunities - and, to be sure, new challenges - for DySA research.

Scaling Laws in Directional Spreading of Droplets on Wettability-Confined Diverging Tracks

Spontaneous pumpless transport of droplets on wettability-confined tracks is important for various applications, such as rapid transport and mixing of fluid droplets, enhanced dropwise condensation, biomedical devices, and so forth. Recent studies have shown that on an open surface, a superhydrophilic track of diverging width, laid on a superhydrophobic background, facilitates the transport of water from the narrower end to the wider end at unprecedented rates (up to 40 cm/s) without external actuation. The spreading behavior on such surfaces, however, has only been characterized for water. Keeping in mind that such designs play a key role for a diverse range of applications, such as handling organic liquids and in point-of-care devices, the importance of characterizing the spreading behavior of viscous liquids on such surfaces cannot be overemphasized. In the present work, the spreading behavior on the aforementioned wettability-patterned diverging tracks was observed for fluids of different viscosities. Two dimensionless variables were identified, and a comprehensive relationship was obtained. Three distinct temporal regimes of droplet spreading were established: I), a Washburn-type slow spreading, II) a much faster Laplace pressure-driven spreading, and III), a sluggish density-augmented Tanner-type film spreading. The results offer design guidance for tracks that can pumplessly manage fluids of various viscosities and surface tensions.

Dual-Responsive Self-Propulsion Smart Device Steadily Driven by CO2 and H2O2

In this paper, we introduce a kind of tertiary amine-based CO₂-responsive material combining with the H₂O₂-responsive material to develop a dual-responsive self-propulsion smart device which can convert the chemical energy of H₂O₂ into mechanical energy steadily through diving-surfacing cycles. In this dual-responsive device, the CO₂-responsive material is designed as a wettability conversion species, which is wrapped with a strip of platinum to catalyze the decomposition of H₂O₂ to generate gaseous O₂ to realize surfacing. In deionized water, the device floats on the surface of the water initially and can perform a diving-surfacing cycle when CO₂ and H₂O₂ stimuli are alternately applied to the aqueous solution. The cyclic movement of the device can be realized by the generation and release of the inner gas through the hydrophobic cover, leading to a new controllable transition of different kinds of energy.

Self-assembly of fluorous amphiphilic copolymers with ionogels and surface switchable wettability

Fluorous amphiphilic ionic copolymers of 1H,1H,2H-Perfluoro-1-octene and vinyl imidazole self-assembled in different solvents to form ionogels and exhibits tunable substrate switching wettability.

Hierarchical Superhydrophobic Surfaces with Micropatterned Nanowire Arrays for High-Efficiency Jumping Droplet Condensation

Self-propelled droplet jumping on nanostructured superhydrophobic surfaces is of interest for a variety of industrial applications including self-cleaning, water harvesting, power generation, and thermal management systems. However, the uncontrolled nucleation-induced Wenzel state of condensed droplets at large surface subcooling (high heat flux) leads to the formation of unwanted large pinned droplets, which results in the flooding phenomenon and greatly degrades the heat transfer performance. In this work, we present a novel strategy to manipulate droplet behaviors during the process from the droplet nucleation to growth and departure through a combination of spatially controlling initial nucleation for mobile droplets by closely spaced nanowires and promoting the spontaneous outward movement of droplets for rapid removal using micropatterned nanowire arrays. Through the optical visualization experiments and heat transfer tests, we demonstrate greatly improved condensation heat transfer characteristics on the hierarchical superhydrophobic surface including the higher density of microdroplets, smaller droplet departure radius, 133% wider range of surface subcooling for droplet jumping, and 37% enhancement in critical heat flux for jumping droplet condensation, compared to the-state-of-art jumping droplet condensation on nanostructured superhydrophobic surfaces. The excellent water repellency of such hierarchical superhydrophobic surfaces can be promising for many potential applications, such as anti-icing, antifogging, water desalination, and phase-change heat transfer.