Hyaluronic acid-Based wound dressings: A review

A review on polysaccharides mediated electrospun nanofibers for diabetic wound healing: Their current status with regulatory perspective

The current treatment strategies for diabetic wound care provide only moderate degree of effectiveness; hence new and improved therapeutic techniques are in great demand. Diabetic wound healing is a complex physiological process that involves synchronisation of various biological events such as haemostasis, inflammation, and remodelling. Nanomaterials like polymeric nanofibers (NFs) offer a promising approach for the treatment of diabetic wounds and have emerged as viable options for wound management. Electrospinning is a powerful and cost-effective method to fabricate versatile NFs with a wide array of raw materials for different biological applications. The electrospun NFs have unique advantages in the development of wound dressings due to their high specific surface area and porosity. The electrospun NFs possess a unique porous structure and biological function similar to the natural extracellular matrix (ECM), and are known to accelerate wound healing. Compared to traditional dressings, the electrospun NFs are more effective in healing wounds owing to their distinct characteristics, good surface functionalisation, better biocompatibility and biodegradability. This review provides a comprehensive overview of the electrospinning procedure and its operating principle, with special emphasis on the role of electrospun NFs in the treatment of diabetic wounds. This review discusses the present techniques applied in the fabrication of NF dressings, and highlights the future prospects of electrospun NFs in medicinal applications.

Electrospun Hyaluronan Nanofiber Membrane Immobilizing Aromatic Doxorubicin as Therapeutic and Regenerative Biomaterial

Lesioned tissue requires synchronous control of disease and regeneration progression after surgery. It is necessary to develop therapeutic and regenerative scaffolds. Here, hyaluronic acid (HA) was esterified with benzyl groups to prepare hyaluronic acid derivative (HA-Bn) nanofibers via electrospinning. Electrospun membranes with average fiber diameters of 407.64 ± 124.8 nm (H400), 642.3 ± 228.76 nm (H600), and 841.09 ± 236.86 nm (H800) were obtained by adjusting the spinning parameters. These fibrous membranes had good biocompatibility, among which the H400 group could promote the proliferation and spread of L929 cells. Using the postoperative treatment of malignant skin melanoma as an example, the anticancer drug doxorubicin (DOX) was encapsulated in nanofibers via hybrid electrospinning. The UV spectroscopy of DOX-loaded nanofibers (HA-DOX) revealed that DOX was successfully encapsulated, and there was a π-π interaction between aromatic DOX and HA-Bn. The drug release profile confirmed the sustained release of about 90%, achieved within 7 days. In vitro cell experiments proved that the HA-DOX nanofiber had a considerable inhibitory effect on B16F10 cells. Therefore, the HA-Bn electrospun membrane could facilitate the potential regeneration of injured skin tissues and be incorporated with drugs to achieve therapeutic effects, offering a powerful approach to developing therapeutic and regenerative biomaterial.

Salvianolic-Acid-B-Loaded HA Self-Healing Hydrogel Promotes Diabetic Wound Healing through Promotion of Anti-Inflammation and Angiogenesis

Inflammatory dysfunction and angiogenesis inhibition are two main factors leading to the delayed healing of diabetic wounds. Hydrogels with anti-inflammatory and angiogenesis-promoting effects have been considered as promising wound care materials. Herein, a salvianolic acid B (SAB)-loaded hyaluronic acid (HA) self-healing hydrogel (HA/SAB) with anti-inflammatory and pro-angiogenesis capacities for diabetic wound healing is reported. The HA hydrogel was prepared via the covalent cross-linking of aldehyde groups in oxidized HA (OHA) and hydrazide groups in adipic dihydrazide (ADH)-modified HA (HA-ADH) with the formation of reversible acylhydrazone bonds. The obtained HA hydrogel exhibited multiple favorable properties such as porous structures, excellent self-healing properties, a sustainable release capacity of SAB, as well as excellent cytocompatibility. In addition, the effects of the SAB-loaded HA self-healing hydrogel were investigated via a full-thickness skin defect model using diabetic rats. The HA/SAB hydrogel showed enhanced skin regeneration effects with accelerated wound closure, shorter remaining dermal space length, thicker granulation tissue formation, and more collagen deposition. Furthermore, reduced inflammatory response and enhanced vascularization were found with HA/SAB2.5 hydrogel-treated wounds, indicating that the hydrogel promotes diabetic wound healing through the promotion of anti-inflammation and angiogenesis. Our results suggest that the fabricated SAB-loaded HA self-healing hydrogel is promising as a wound dressing for the treatment of diabetic wounds.

Enhancing cartilage repair with optimized supramolecular hydrogel-based scaffold and pulsed electromagnetic field

Functional tissue engineering strategies provide innovative approach for the repair and regeneration of damaged cartilage. Hydrogel is widely used because it could provide rapid defect filling and proper structure support, and is biocompatible for cell aggregation and matrix deposition. Efforts have been made to seek suitable scaffolds for cartilage tissue engineering. Here Alg-DA/Ac-β-CD/gelatin hydrogel was designed with the features of physical and chemical multiple crosslinking and self-healing properties. Gelation time, swelling ratio, biodegradability and biocompatibility of the hydrogels were systematically characterized, and the injectable self-healing adhesive hydrogel were demonstrated to exhibit ideal properties for cartilage repair. Furthermore, the new hydrogel design introduces a pre-gel state before photo-crosslinking, where increased viscosity and decreased fluidity allow the gel to remain in a semi-solid condition. This granted multiple administration routes to the hydrogels, which brings hydrogels the ability to adapt to complex clinical situations. Pulsed electromagnetic fields (PEMF) have been recognized as a promising solution to various health problems owing to their noninvasive properties and therapeutic potentials. PEMF treatment offers a better clinical outcome with fewer, if any, side effects, and wildly used in musculoskeletal tissue repair. Thereby we propose PEMF as an effective biophysical stimulation to be 4th key element in cartilage tissue engineering. In this study, the as-prepared Alg-DA/Ac-β-CD/gelatin hydrogels were utilized in the rat osteochondral defect model, and the potential application of PEMF in cartilage tissue engineering were investigated. PEMF treatment were proven to enhance the quality of engineered chondrogenic constructs in vitro, and facilitate chondrogenesis and cartilage repair in vivo. All of the results suggested that with the injectable self-healing adhesive hydrogel and PEMF treatment, this newly proposed tissue engineering strategy revealed superior clinical potential for cartilage defect treatment.

Chitosan and hyaluronic-based hydrogels could promote the infected wound healing

The most important function of skin is to prevent biological dehydration and protect internal structures from the environment. When a wound becomes infected, the bacteria cause a sustained inflammatory response at the infected site, further delaying the healing process. Therefore, the search for better antibacterial strategies has become a topic of great concern. Therefore, the development of multifunctional hydrogels with antibacterial properties, ROS removal, and hemostasis is urgently required for promoting wound healing process. Chitosan is the only cationic natural polysaccharide with good biocompatibility, antibacterial and hemostatic ability. It is a candidate material to prepare hydrogel wound dressing. Hyaluronic acid (HA) is a natural biological macromolecule that belongs to a group of heteropolysaccharides known as non-sulfated glycosaminoglycans. It is a major component of the skin extracellular matrix (ECM) and is involved in inflammation, angiogenesis, and tissue regeneration. Here, the hydrogel was designed with the natural macromolecular of the gallic acid-grafted quaternized chitosan (GA-QCS) and oxidized hyaluronic acid (OHA) via Schiff base and/or Michael addition reaction. It was found that the GA-QCS/OHA hydrogel exhibited multifunctional capabilities with injectable, hemostasis, degradation, and release of medicines. In addiation, GA-QCS/OHA hydrogels exhibited remarkable antioxidant and migration promoting effects in vitro. And the mupirocin-loaded GA-QCS/OHA hydrogels had inhibitory effects on E. coli (Gram-negative bacterium) and S. aureus (Gram-positive bacterium) in vitro. A full-thickness skin of S. aureus infection mouse wound model was used to test the bioactive effect of the hydrogels and the accelerated wound healing was obtained due to the inhibiting the proinflammatory factor TNF-α and upregulating the vascularization factor CD31. This study proposed an effective strategy based on antioxidant, antibacterial, self-healing multifunctional hydrogel for wound healing under various infectious complications. This natural macromolecular hydrogel could act as an effective reactive oxygen species scavenger to promote the wound healing in the future.

Design and biopharmaceutical preclinical characterisation of a new thermosensitive hydrogel for the removal of gastric polyps

BACKGROUND AND AIMS

Submucosal injection agents are widely used solutions in gastric polyp resection techniques. Currently, many different solutions are used in clinical practice, but most are not authorised for this use or are not biopharmaceutical characterised. The objective of this multidisciplinary work is to test the efficacy of a novel thermosensitive hydrogel designed specifically for this indication.

METHODS

A mixture design of various components (Pluronic®, hyaluronic acid and sodium alginate) was carried out to select the combination with optimal properties for this use. Three final thermosensitive hydrogels were selected on which biopharmaceutical characterisation was performed and stability and biocompatibility were analysed. Efficacy in maintaining elevation was tested ex vivo on pig mucosa and in vivo in pigs RESULTS: The mixture design allowed selection of the ideal combinations of agents for the characteristics sought. The thermosensitive hydrogels studied showed high values of hardness and viscosity at 37 °C, maintaining good syringeability. One of them demonstrated superiority in maintaining polyp elevation in the ex vivo assay and non-inferiority in the in vivo assay.

CONCLUSION

The thermosensitive hydrogel specifically designed for this use is promising both for its biopharmaceutical characteristics and for its demonstrated efficacy. This study lays the foundation for evaluating the hydrogel in humans.

Ketoprofen-Based Polymer-Drug Nanoparticles Provide Anti-Inflammatory Properties to HA/Collagen Hydrogels

Current limitations of wound dressings for treating chronic wounds require the development of novel approaches. One of these is the immune-centered approach, which aims to restore the pro-regenerative and anti-inflammatory properties of macrophages. Under inflammatory conditions, ketoprofen nanoparticles (KT NPs) can reduce pro-inflammatory markers of macrophages and increase anti-inflammatory cytokines. To assess their suitability as part of wound dressings, these NPs were combined with hyaluronan (HA)/collagen-based hydro- (HGs) and cryogels (CGs). Different HA and NP concentrations and loading techniques for NP incorporation were used. The NP release, gel morphology, and mechanical properties were studied. Generally, colonialization of the gels with macrophages resulted in high cell viability and proliferation. Furthermore, direct contact of the NPs to the cells reduced the level of nitric oxide (NO). The formation of multinucleated cells on the gels was low and further decreased by the NPs. For the HGs that produced the highest reduction in NO, extended ELISA studies showed reduced levels of the pro-inflammatory markers PGE2, IL-12 p40, TNF-α, and IL-6. Thus, HA/collagen-based gels containing KT NPs may represent a novel therapeutic approach for treating chronic wounds. Whether effects observed in vitro translate into a favorable profile on skin regeneration in vivo will require rigorous testing.

Antimicrobial Nano-Zinc Oxide Biocomposites for Wound Healing Applications: A Review

Chronic wounds are a major concern for global health, affecting millions of individuals worldwide. As their occurrence is correlated with age and age-related comorbidities, their incidence in the population is set to increase in the forthcoming years. This burden is further worsened by the rise of antimicrobial resistance (AMR), which causes wound infections that are increasingly hard to treat with current antibiotics. Antimicrobial bionanocomposites are an emerging class of materials that combine the biocompatibility and tissue-mimicking properties of biomacromolecules with the antimicrobial activity of metal or metal oxide nanoparticles. Among these nanostructured agents, zinc oxide (ZnO) is one of the most promising for its microbicidal effects and its anti-inflammatory properties, and as a source of essential zinc ions. This review analyses the most recent developments in the field of nano-ZnO–bionanocomposite (nZnO-BNC) materials—mainly in the form of films, but also hydrogel or electrospun bandages—from the different preparation techniques to their properties and antibacterial and wound-healing performances. The effect of nanostructured ZnO on the mechanical, water and gas barrier, swelling, optical, thermal, water affinity, and drug-release properties are examined and linked to the preparation methods. Antimicrobial assays over a wide range of bacterial strains are extensively surveyed, and wound-healing studies are finally considered to provide a comprehensive assessment framework. While early results are promising, a systematic and standardised testing procedure for the comparison of antibacterial properties is still lacking, partly because of a not-yet fully understood antimicrobial mechanism. This work, therefore, allowed, on one hand, the determination of the best strategies for the design, engineering, and application of n-ZnO-BNC, and, on the other hand, the identification of the current challenges and opportunities for future research.

From crosslinking strategies to biomedical applications of hyaluronic acid-based hydrogels: A review

Hyaluronic acid (HA) is not only a natural anionic polysaccharide with excellent biocompatibility, biodegradability, and moisturizing effect, but also an essential factor that can affect angiogenesis, inflammation, cell behavior, which has a wide range of applications in the biomedical field. Among them, HA-based hydrogels formed by various physical or chemical crosslinking strategies are particularly striking. They not only retain the physiological function of HA, but also have the skeleton function of hydrogel, which further expands the application of HA. However, HA-based natural hydrogels generally have problems such as insufficient mechanical strength and susceptibility to degradation by hyaluronidase, which limits their application to a certain extent. To solve such problems, researchers have prepared a variety of HA-based multifunctional hydrogels with remarkable properties in recent years by adopting various structural modification methods or novel crosslinking strategies, as well as introducing functionally reactive molecules or moieties, which have extended the application scope. This manuscript systematically introduced common crosslinking strategies of HA-based hydrogels and highlighted the development of novel HA-based hydrogels in anticancer drug delivery, cartilage repair, three-dimensional cell culture, skin dressing and other fields. We hope to provide some references for the subsequent development of HA-based hydrogels in the biomedical field.

Multifunctional conductive hyaluronic acid hydrogels for wound care and skin regeneration

Although the main function of skin is to act as a protective barrier against external factors, it is indeed an extremely vulnerable tissue. Skincare, regardless of the wound type, requires effective treatments to prevent bacterial infection and local inflammation. The complex biological roles displayed by hyaluronic acid (HA) during the wound healing process have made this multifaceted polysaccharide an alternative biomaterial to prepare wound dressings. Therefore, herein, we present the most advanced research undertaken to engineer conductive and interactive hydrogels based on HA as wound dressings that enhance skin tissue regeneration either through electrical stimulation (ES) or by displaying multifunctional performance. First, we briefly introduce to the reader the effect of ES on promoting wound healing and why HA has become a vogue as a wound healing agent. Then, a selection of systems, chosen according to their multifunctional relevance, is presented. Special care has been taken to highlight those recently reported works (mainly from the last 3 years) with enhanced scalability and biomimicry. By doing that, we have turned a critical eye on the field considering what major challenges must be overcome for these systems to have real commercial, clinical, or other translational impact.

One-Pot Synthesis of Bioadhesive Double-Network Hydrogel Patch as Disposable Wound Dressing

Inventions of materials to achieve biocompatibility, bioadhesion, and easy manufacturing are the urgent demand for promoting wound healing in clinical treatment. Hyaluronic acid (HA) is probably the ideal candidate for current dressing materials due to its well-known biocompatibility. However, the unavoidable problem for HA dressings is their inherent low adhesiveness to wounds, which severely impairs their treatment efficacy, especially during body movement. Here, we report a one-pot facile fabrication of hybrid double-network polydopamine-HA (PDA-HA) hydrogel with significantly enhanced adhesiveness compared to the HA hydrogel. Besides the easy manufacturing and promoted effectiveness, the PDA-HA hydrogel could be vacuum-dried to form a patch, further benefitting from the convenience for storage and distribution. When applied on the wound, the PDA-HA patch quickly rehydrated by absorbing exudate and stuck tightly to the wound. The applied PDA-HA patches keep the wounds covered for more than 7 days against strenuous exercise. Thus, mouse full-thickness wounds treated with the PDA-HA patches exhibited increased healing rates, where epithelization was finished within 14 days. Moreover, the hydrogel dressing exhibited promoting effects on vascularization and cell proliferation/migration. Together with the easy manufacturing procedure, good adhesion/adaptation, and promotion of wound healing, the PDA-HA patch holds great potential for future clinical translation.

Self-esterified hyaluronan hydrogels: Advancements in the production with positive implications in tissue healing

Hyaluronan-(HA) short half-life in vivo limits its benefits in tissue repair. Self-esterified-HA is of great interest because it progressively releases HA, promoting tissue-regeneration longer than the unmodified-polymer. Here, the 1-ethyl-3-(3-diethylaminopropyl)carbodiimide(EDC)-hydroxybenzotriazole(HOBt) carboxyl-activating-system was evaluated for self-esterifying HA in the solid state. The aim was to propose an alternative to the time-consuming, conventional reaction of quaternary-ammonium-salts of HA with hydrophobic activating-systems in organic media, and to the EDC-mediated reaction, limited by by-product formation. Additionally, we aimed to obtain derivatives releasing defined molecular-weight(MW)-HA that would be valuable for tissue renewal. A 250 kDa-HA(powder/sponge) was reacted with increasing EDC/HOBt amounts. HA-modification was investigated through Size-Exclusion-Chromatography-Triple-Detector-Array-analyses, FT-IR/¹H NMR and the products(XHAs) extensively characterized. Compared to conventional protocols, the set procedure is more efficient, avoids side-reactions, allows for an easier processing to diverse clinically-usable 3D-forms, leads to products gradually releasing HA under physiological conditions with the possibility to tune the MW of the biopolymer-released. Finally, the XHAs exhibit sound stability to Bovine-Testicular-Hyaluronidase, hydration/mechanical properties suitable for wound-dressings, with improvements over available matrices, and prompt in vitro wound-regeneration, comparably to linear-HA. To the best of our knowledge, the procedure is the first valid alternative to conventional protocols for HA self-esterification with advances in the process itself and in product performance.

Single-molecule AFM study of hyaluronic acid softening in electrolyte solutions

Investigation of hyaluronic acid (HA) morphology and mechanical properties at a single-molecule level is important for the development of HA based biomaterials. We have developed the atomic force microscopy (AFM) based approach for quantitative characterization of conformation of HA molecules. HA molecules adsorbed on a modified graphitic surface form oriented linear segments. Conformation of HA molecules can be considered as two-dimensional quasi-projection of a three-dimensional conformation locally straightened by a substrate. The persistence length and Young's modulus of biomolecules estimated using wormlike chain model decrease from 15.7 to 9.9 nm, and from ∼21 to ∼13 GPa, respectively, when KCl concentration increases from 0 to 100 mM. The dependence of the persistence length on ionic strength supports the Odijk-Skolnick-Fixman model of polyelectrolyte stiffening in electrolyte solution. The obtained results represent a new insight into the conformation and mechanical characteristics of HA molecules and complement the characterization of this biopolymer by bulk methods.

Black phosphorus-enhanced injectable hydrogel for infected soft tissue healing

The misuse of antibiotics makes clinical treatment of soft tissue infection a huge challenge in prosthesis replacement. In this study, a black phosphorus (BP)-enhanced antibacterial injectable hydrogel (HAABP) was developed by the dynamic coordinative cross-linking among thiolated hyaluronic acid, silver ion (Ag+), and BP. HAABP has been proven to possess typical porous structures, excellent injectability, and rapid self-healing properties. In addition, the shear modulus was positive correlative to the concentration of BP. In vitro, HAABP maintained good cytocompatibility and showed a highly efficient synergistic inhibitory effect on Staphylococcus aureus through the irradiation of near infrared light and the release of Ag+. In vivo, HAABP not only inhibited the persistent infection but also accelerated the deposition of collagen fibers and angiogenesis by down-regulating the inflammatory factor TNF-α in the infectious wound defect, thereby repairing the natural barrier of tissue. This study developed a BP-enhanced injectable hydrogel that provided a simple and efficient synergistic antibacterial strategy to treat soft tissue infections around prostheses.

A Schiff base hydrogel dressing loading extracts from Periplaneta Americana for diabetic wound healing

As a common complication of diabetic patients, the chronic wound of diabetes has a high incidence, expensive treatment, and recurrence probability, which causes long-term negative impacts on patients' daily life. In this study, the hydrogel was formed by Schiff base reaction between oxidized hyaluronic acid (OHA) and carboxymethyl chitosan (CMCS), and the composite hydrogel dressing was prepared by adding the active polypeptides extract of Periplaneta Americana (PAE). By mass spectrometer determined, PAE mainly includes vitellogenins that can trigger an immune response. The composite hydrogel has good swelling properties, proper fluidity, and a regular 3D network structure. The hydrogel has good cytocompatibility and can promote cell proliferation by L929 fibroblast assay. Finally, it was used to evaluate the effect of diabetic wound repair. The results showed that it could effectively promote wound healing, promote tissue and vascular regeneration, inhibit inflammatory factors, and promote the expression of growth factors. The OHA/CMCS/PAE hydrogels would be promising candidates for chronic wound healing applications.

The Efficiency and Safety of Platelet-Rich Plasma Dressing in the Treatment of Chronic Wounds: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

Recently, many clinical trials have applied platelet-rich plasma (PRP) dressings to treat wounds that have stopped healing, which are also called chronic wounds. However, the clinical efficiency of PRP dressings in treating chronic wounds is still controversial. Therefore, we conducted this study to compare PRP dressings with normal saline dressings in treating chronic wounds. Relevant randomized controlled trials focusing on utilizing PRP dressings in treating chronic wounds were extracted from bibliographic databases. Finally, 330 patients with chronic wounds, reported in eight randomized controlled trials, were included in this study. In total, 169 out of 330 (51.21%) were treated with PRP dressings, and 161 out of 330 (48.79%) were treated with normal saline dressings. The pooled results showed that the complete healing rate of the PRP group was significantly higher than that of saline group at 8 weeks and 12 weeks, respectively. In addition, there were no significant differences in wound infection and adverse events. Compared with normal saline dressing, the PRP dressing could effectively enhance the prognosis of chronic wounds. Furthermore, the PRP did not increase wound infection rate or occurrence of adverse events as an available treatment for chronic wounds.

Combinational System of Lipid-Based Nanocarriers and Biodegradable Polymers for Wound Healing: An Updated Review

Skin wounds have imposed serious socioeconomic burdens on healthcare providers and patients. There are just more than 25,000 burn injury-related deaths reported each year. Conventional treatments do not often allow the re-establishment of the function of affected regions and structures, resulting in dehydration and wound infections. Many nanocarriers, such as lipid-based systems or biobased and biodegradable polymers and their associated platforms, are favorable in wound healing due to their ability to promote cell adhesion and migration, thus improving wound healing and reducing scarring. Hence, many researchers have focused on developing new wound dressings based on such compounds with desirable effects. However, when applied in wound healing, some problems occur, such as the high cost of public health, novel treatments emphasizing reduced healthcare costs, and increasing quality of treatment outcomes. The integrated hybrid systems of lipid-based nanocarriers (LNCs) and polymer-based systems can be promising as the solution for the above problems in the wound healing process. Furthermore, novel drug delivery systems showed more effective release of therapeutic agents, suitable mimicking of the physiological environment, and improvement in the function of the single system. This review highlights recent advances in lipid-based systems and the role of lipid-based carriers and biodegradable polymers in wound healing.

Drug Delivery Systems in Regenerative Medicine: An Updated Review

Modern drug discovery methods led to evolving new agents with significant therapeutic potential. However, their properties, such as solubility and administration-related challenges, may hinder their benefits. Moreover, advances in biotechnology resulted in the development of a new generation of molecules with a short half-life that necessitates frequent administration. In this context, controlled release systems are required to enhance treatment efficacy and improve patient compliance. Innovative drug delivery systems are promising tools that protect therapeutic proteins and peptides against proteolytic degradation where controlled delivery is achievable. The present review provides an overview of different approaches used for drug delivery.

Hyaluronic acid-FGF2-derived peptide bioconjugates for suppression of FGFR2 and AR simultaneously as an acne antagonist

Acne is a chronic skin condition that has serious consequences for mental and social well-being because it frequently occurs on the face. Several acne treatment approaches have commonly been used but have been hampered by side effects or weak activity. Thus, the investigation of the safety and efficacy of anti-acne compounds is of considerable medical importance. Herein, an endogenous peptide (P5) derived from fibroblast growth factors 2 (FGF2) was conjugated to the polysaccharide hyaluronic acid (HA) to generate the bioconjugate nanoparticle HA-P5, which suppresses fibroblast growth factor receptors (FGFRs) to significantly rehabilitate acne lesions and reduce sebum accumulation in vivo and in vitro. Moreover, our results show that HA-P5 inhibits both fibroblast growth factor receptor 2 (FGFR2) and androgen receptor (AR) signalling in SZ95 cells, reverses the acne-prone transcriptome, and decreases sebum secretion. Furthermore, the cosuppression mechanism revealed that HA-P5 blocks FGFR2 activation, as well as the YTH N6-methyladenosine RNA binding protein F3 (YTHDF3) downstream molecules, including an N6-methyladenosine (m6A) reader that facilitates AR translation. More importantly, a significant difference between HA-P5 and the commercial FGFR inhibitor AZD4547 is that HA-P5 does not trigger the overexpression of aldo-keto reductase family 1 member C3 (AKR1C3), which blocks acne treatment by catalyzing the synthesis of testosterone. Overall, we demonstrate that a polysaccharide-conjugated and naturally derived oligopeptide HA-P5 can alleviate acne and act as an optimal FGFR2 inhibitor and reveal that YTHDF3 plays a crucial role in signalling between FGFR2 and AR.

A Sustainable Solution to Skin Diseases: Ecofriendly Transdermal Patches

Skin is the largest epithelial surface of the human body, with a surface area of 2 m2 for the average adult human. Being an external organ, it is susceptible to more than 3000 potential skin diseases, including injury, inflammation, microbial and viral infections, and skin cancer. Due to its nature, it offers a large accessible site for administrating several medications against these diseases. The dermal and transdermal delivery of such medications are often ensured by utilizing dermal/transdermal patches or microneedles made of biocompatible and biodegradable materials. These tools provide controlled delivery of drugs to the site of action in a rapid and therapeutically effective manner with enhanced diffusivity and minimal side effects. Regrettably, they are usually fabricated using synthetic materials with possible harmful environmental effects. Manufacturing such tools using green synthesis routes and raw materials is hence essential for both ecological and economic sustainability. In this review, natural materials including chitosan/chitin, alginate, keratin, gelatin, cellulose, hyaluronic acid, pectin, and collagen utilized in designing ecofriendly patches will be explored. Their implementation in wound healing, skin cancer, inflammations, and infections will be discussed, and the significance of these studies will be evaluated with future perspectives.

Polysaccharide-Based Multifunctional Hydrogel Bio-Adhesives for Wound Healing: A Review

Wound healing is a long-term and complex biological process that involves multiple hemostasis, inflammation, proliferation, and remodeling stages. In order to realize comprehensive and systematic wound management, appropriate wound treatment bio-adhesives are urgently needed. Hydrogel bio-adhesives have excellent properties and show unique and remarkable advantages in the field of wound management. This review begins with a detailed description of the design criteria and functionalities of ideal hydrogel bio-adhesives for wound healing. Then, recent advances in polysaccharide-based multifunctional hydrogel bio-adhesives, which involve chitosan, hyaluronic acid, alginate, cellulose, dextran, konjac glucomannan, chondroitin sulfate, and other polysaccharides, are comprehensively discussed. Finally, the current challenges and future research directions of polysaccharide-based hydrogel bio-adhesives for wound healing are proposed to stimulate further exploration by researchers.

Enzymatically-Crosslinked Gelatin Hydrogels with Nanostructured Architecture and Self-Healing Performance for Potential Use as Wound Dressings

Development of natural protein-based hydrogels with self-healing performance and tunable physical properties has attracted increased attention owing to their wide potential not only in the pharmaceutical field, but also in wounds management. This work reports the development of a versatile hydrogel based on enzymatically-crosslinked gelatin and nanogels loaded with amoxicillin (Amox), an antibiotic used in wound infections. The transglutaminase (TGase)-crosslinked hydrogels and encapsulating nanogels were formed rapidly through enzymatic crosslinking and self-assembly interactions in mild conditions. The nanogels formed through the self-assemble of maleoyl-chitosan (MAC5) and polyaspartic acid (PAS) may have positive influence on the self-healing capacity and drug distribution within the hydrogel network through the interactions established between gelatin and gel-like nanocarriers. The physicochemical properties of the enzymatically-crosslinked hydrogels, such as internal structure, swelling and degradation behavior, were studied. In addition, the Amox release studies indicated a rapid release when the pH of the medium decreased, which represents a favorable characteristic for use in the healing of infected wounds. It was further observed through the in vitro and in vivo biocompatibility assays that the optimized scaffolds have great potential to be used as wound dressings.

Hyaluronic acid and chitosan-based injectable and self-healing hydrogel with inherent antibacterial and antioxidant bioactivities

Injectable dressings offering intrinsic antibacterial activity and antioxidation are required, because persistent bacterial infection and oxidative damage are common issues associated with chronic non-healing wounds. Herein, a versatile QCS-l-TA-l-OHA hydrogel is fabricated using ubiquitous nature derived biological macromolecules, quaternized chitosan (QCS), tannic acid (TA) and oxidant hyaluronic acid (OHA), driving by multiple dynamic interactions under physiological conditions. The hydrogel can serve as multiple functional wound dress with injectable and self-healing capabilities coupling with attractive antibacterial activity and antioxidation. The biocompatible and self-biodegradable hydrogel augments free radical scavenging capacity, antibacterial, angiogenesis, mature granulation tissue and collagen disposition, enabling fast wound healing of rat skin full-thickness incision model. This study highlights a wound dressing platform of hyaluronic acid and chitosan based injectable and self-healing hydrogel with inherent antibacterial and antioxidant bioactivities, thereby avoiding the use of antibiotics or antioxidant agents.

Extraction and characterization of hyaluronic acid from the eyeball of Nile Tilapia (Oreochromis niloticus)

Hyaluronic acid (HA) is a biopolymer of enormous value aggregation for in general industry. The vitreous humor of the eyeball from Nile tilapia contains appreciable amounts of hyaluronic acid. In this sense, the aim of this work was to extract and characterize hyaluronic acid from the eyeball of the Nile tilapia for biomedical applications, adding value to fish industry residues. The characterization by infra-red (FTIR), ¹³C nuclear magnetic resonance (NMR) and high performance liquid chromatography (HPLC) confirmed that hyaluronic acid was obtained. The gel permeation chromatography (GPC) showed that the obtained material presents a low molecular mass (37 KDa). Thermogravimetry (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis showed that the materials present a thermal stability superior to the commercial hyaluronic acid from Streptococcus equi, with a partially crystalline character. The cytotoxicity assay (MTT method) with fibroblast cells (L929) demonstrated that the extracted biopolymer besides not being cytotoxic, was able to stimulate cell proliferation. Therefore, the hyaluronic acid extracted from this source of residue constitutes a product with biotechnological potential, which has adequate quality for wide biomedical applications.

Nanocomposite multifunctional hyaluronic acid hydrogel with photothermal antibacterial and antioxidant properties for infected wound healing

Bacterial infection and subsequent reactive oxygen species (ROS) damage are major factors that delay wound healing in infected skin. Recently, photothermal therapy (PTT), as a new antibacterial method, has shown great advantages in the treatment of infected skin wound. Antibacterial and antioxidant hydrogels can reduce bacterial colonization and infection, scavenge ROS, relieve inflammation, and accelerate wound healing. In this study, an enzyme-crosslinked hyaluronic acid-tyramine (HT) hydrogel loaded with antioxidant and photothermal silver nanoparticles (AgNPs), named HTA, was developed as functional wound dressing to promote the infected skin wound healing. Natural antioxidant tannic acids (TA) were used as both reducing and stabilizing agents to facilely synthesize the silver nanoparticles capped with TA (AgNPs@TA). The incorporation of AgNPs@TA significantly enhanced the antioxidant, antibacterial, photothermal antibacterial, adhesive, and hemostatic abilities of the resulted HTA hydrogel. Besides, HTA hydrogel has rapid gelation, well injection and biocompatibility. In vivo results on the Staphylococcus aureus and Escherichia coli co-infected mouse skin wound model showed that HTA_0.4 (containing 0.4 mg/mL AgNPs@TA) hydrogel combined with near infrared ray radiation highly alleviated inflammation, promoted angiogenesis, and accelerated the healing process. Therefore, this nanocomposite hydrogel wound dressing with antibacterial and antioxidant capabilities has great application potential in the treatment of infected skin wounds.

Adhesive hydrogels in osteoarthritis: from design to application

Osteoarthritis (OA) is the most common type of degenerative joint disease which affects 7% of the global population and more than 500 million people worldwide. One research frontier is the development of hydrogels for OA treatment, which operate either as functional scaffolds of tissue engineering or as delivery vehicles of functional additives. Both approaches address the big challenge: establishing stable integration of such delivery systems or implants. Adhesive hydrogels provide possible solutions to this challenge. However, few studies have described the current advances in using adhesive hydrogel for OA treatment. This review summarizes the commonly used hydrogels with their adhesion mechanisms and components. Additionally, recognizing that OA is a complex disease involving different biological mechanisms, the bioactive therapeutic strategies are also presented. By presenting the adhesive hydrogels in an interdisciplinary way, including both the fields of chemistry and biology, this review will attempt to provide a comprehensive insight for designing novel bioadhesive systems for OA therapy.

A Dual-Crosslinked Hydrogel Based on Gelatin Methacryloyl and Sulfhydrylated Chitosan for Promoting Wound Healing

The skin is the largest organ of the human body. Skin injuries, especially full-thickness injuries, are a major treatment challenge in clinical practice. Therefore, wound dressing materials with therapeutic effects have great practical significance in healthcare. This study used photocrosslinkable gelatin methacryloyl (GelMA) and sulfhydrylated chitosan (CS-SH) to design a double-crosslinked hydrogel for wound dressing. When crosslinked together, the resulting hydrogels showed a highly porous inner structure, and enhanced mechanical properties and moisture retention capacity. The compression modulus of the GelMA/CS-SH hydrogel (GCH) reached up to about 40 kPa and was much higher than that of pure GelMA hydrogel, and the compression modulus was increased with the amount of CS-SH. In vitro study showed no cytotoxicity of obtained hydrogels. Interestingly, a higher concentration of CS-SH slightly promoted the proliferation of cells. Moreover, the double-crosslinked hydrogel exhibited antibacterial properties because of the presence of chitosan. In vivo study based on rats showed that full-thickness skin defects healed on the 15th day. Histological results indicate that the hydrogel accelerated the repair of hair follicles and encouraged the orderly growth of collagen fibers in the wound. Furthermore, better blood vessel formation and a higher expression of VEGFR were observed in the hydrogel group when compared with the untreated control group. Based on our findings, GCH could be a promising candidate for full-thickness wound dressing.

Construction of Smart Biomaterials for Promoting Diabetic Wound Healing

Diabetes mellitus is a complicated metabolic disease that has become one of the fastest-growing health crises in modern society. Diabetic patients may suffer from various complications, and diabetic foot is one of them. It can lead to increased rates of lower-extremity amputation and mortality, even seriously threatening the life and health of patients. Because its healing process is affected by various factors, its management and treatment are very challenging. To address these problems, smart biomaterials have been developed to expedite diabetic wound closure and improve treatment outcomes. This review begins with a discussion of the basic mechanisms of wound recovery and the limitations of current dressings used for diabetic wound healing. Then, the categories and characteristics of the smart biomaterial scaffolds, which can be utilized as a delivery system for drugs with anti-inflammatory activity, bioactive agency, and antibacterial nanoparticles for diabetic wound treatment were described. In addition, it can act as a responsive system to the stimulus of the pH, reactive oxygen species, and glucose concentration from the wound microenvironment. These results show that smart biomaterials have an enormous perspective for the treatment of diabetic wounds in all stages of healing. Finally, the advantages of the construction of smart biomaterials are summarized, and possible new strategies for the clinical management of diabetic wounds are proposed.

Natural Compounds and Biopolymers-Based Hydrogels Join Forces to Promote Wound Healing

Rapid and complete wound healing is a clinical emergency, mainly in pathological conditions such as Type 2 Diabetes mellitus. Many therapeutic tools are not resolutive, and the research for a more efficient remedial remains a challenge. Wound dressings play an essential role in diabetic wound healing. In particular, biocompatible hydrogels represent the most attractive wound dressings due to their ability to retain moisture as well as ability to act as a barrier against bacteria. In the last years, different functionalized hydrogels have been proposed as wound dressing materials, showing encouraging outcomes with great benefits in the healing of the diabetic wounds. Specifically, because of their excellent biocompatibility and biodegradability, natural bioactive compounds, as well as biomacromolecules such as polysaccharides and protein, are usually employed in the biomedical field. In this review, readers can find the main discoveries regarding the employment of naturally occurring compounds and biopolymers as wound healing promoters with antibacterial activity. The emerging approaches and engineered devices for effective wound care in diabetic patients are reported and deeply investigated.

Comparison of hyaluronic acid, hypochlorous acid, and flurbiprofen on postoperative morbidity in palatal donor area: a randomized controlled clinical trial

OBJECTIVE

This study aims to evaluate the effects of topical hyaluronic acid (HA), hypochlorous acid (HOCl), and flurbiprofen on postoperative morbidity of palatal donor sites after free gingival graft (FGG) surgery.

MATERIALS AND METHODS

Sixty patients requiring FGG were randomly assigned into four groups: control, HA gel (600 mg/100 g high molecular weight hyaluronic acid), HOCl spray (170-200 ppm, ph7.1), flurbiprofen spray (0.075gr flurbiprofen). Topical agents were applied for 14 days, according to groups. Patients were followed for 28 days. Palatal healing was assessed with the Laundry wound healing index (WHI). Complete epithelization (CE) was evaluated with photographs and H₂O₂ bubbling. Pain, burning sensation, chewing efficacy, and tissue color match (CM) were evaluated using a visual analog scale (VAS). Postoperative analgesic consumption and delayed bleeding (DB) were also recorded.

RESULTS

HA provided better WHI values on the 7^th, 14^th, and 21^st days compared to the other groups, respectively (p < 0.05). CE was formed on the 21^st day in the HA group but on the 28^th day in the other groups. HOCl and flurbiprofen groups were not different from the control group or each other in terms of WHI. HOCl had the lowest VAS scores of all time periods. DB was not observed in any group. Significantly fewer analgesics were taken in the topical agent-applied groups compared to the control group.

CONCLUSIONS

HA exhibits a positive impact on the epithelization of palatal wound healing and color matching. HOCl and flurbiprofen provided less pain; however, they might have negative effects on palatal wound healing.

CLINICAL RELEVANCE

As a result of obtaining free gingival grafts from palatal tissue for mucogingival surgical procedures, secondary wound healing of the donor area occurs. This wound in the palatal region can cause discomfort and pain every time patients use their mouths. The use of HA can reduce postoperative complications by accelerating wound healing and reducing pain. The topical use of flurbiprofen and HOCl can reduce patients' pain.

New insights into balancing wound healing and scarless skin repair

Scars caused by skin injuries after burns, wounds, abrasions and operations have serious physical and psychological effects on patients. In recent years, the research of scar free wound repair has been greatly expanded. However, understanding the complex mechanisms of wound healing, in which various cells, cytokines and mechanical force interact, is critical to developing a treatment that can achieve scarless wound healing. Therefore, this paper reviews the types of wounds, the mechanism of scar formation in the healing process, and the current research progress on the dual consideration of wound healing and scar prevention, and some strategies for the treatment of scar free wound repair.

Hyaluronic acid hydrolysis using vacuum ultraviolet TiO2 photocatalysis combined with an oxygen nanobubble system

Advanced technologies for producing high-quality low molecular weight hyaluronic acid (LMW-HA) are required from the perspective of cost-efficiency and biosafety. Here, we report a new LMW-HA production system from high molecular weight HA (HMW-HA) using vacuum ultraviolet TiO₂ photocatalysis with an oxygen nanobubble system (VUV-TP-NB). The VUV-TP-NB treatment for 3 h resulted in a satisfactory LMW-HA (approximately 50 kDa measured by GPC) yield with a low endotoxin level. Further, there were no inherent structural changes in the LMW-HA during the oxidative degradation process. Compared with conventional acid and enzyme hydrolysis methods, VUV-TP-NB showed similar degradation degree with viscosity though reduced process time by at least 8-fold. In terms of endotoxin and antioxidant effects, degradation using VUV-TP-NB demonstrated the lowest endotoxin level (0.21 EU/mL) and highest radical scavenging activity. This nanobubble-based photocatalysis system can thus be used to produce biosafe LMW-HA cost-effectively for food, medical, and cosmetics applications.

Polysaccharide-based hydrogels: New insights and futuristic prospects in wound healing

Polysaccharides elicit enormous and promising applications due to their extensive obtainability, innocuousness, and biodegradability. Various outstanding features of polysaccharides can be employed to fabricate biomimetic and multifunctional hydrogels as efficient wound dressings. These hydrogels mimic the natural extracellular matrix and also boost the proliferation of cells. Owing to distinctive architectures and abundance of functional groups, polysaccharide-derived hydrogels have exceptional physicochemical properties and unique therapeutic interventions. Hydrogels designed using polysaccharides can effectively safeguard wounds from bacterial attack. This review includes wound physiology and emphasises on numerous polysaccharide-based hydrogels for wound repair applications. Polysaccharide hydrogels for different wound types and diverse therapeutic agents loaded in hydrogels for wound repair with recent patents are portrayed in the current manuscript, debating the potential of fascinating hydrogels for effective wound healing. More research is required to engineer multifaceted advanced polysaccharide hydrogels with tuneable and adjustable properties to attain huge potential in wound healing.

Drug Release and Cytotoxicity of Hyaluronic Acid and Zinc Oxide Gels, An In-Vitro Study

Hyaluronic acid (HA) is a naturally occurring biopolymer, with a remarkable wound healing property. Zinc-oxide non-eugenol is a material widely used for periodontal dressing in dentistry. However, it has been reported that zinc oxide non-eugenol is toxic to osteoblasts and fibroblasts. Hence, the present study aimed to evaluate the drug release and cytotoxicity of HA and zinc-oxide gels. Hydrogels of HA and zinc oxide were formulated with carbopol as a carrier. In vitro drug release was performed by UV spectrophotometry, dialysis, and vial bag methods. Cytotoxicity assessment of HA and zinc-oxide gels was performed in human periodontal ligament fibroblasts (HPdLF) and human gingival fibroblasts (hGFs). An inverted phase-contrast microscope was used to assess the morphological changes. At 24 and 48 hr, HPdLF cells showed the highest viability in 0.1% low molecular weight-HA (LMW-HA) with a median value of 131.9, and hGFs showed the highest viability in 5% LMW-HA with a median of 129.56. The highest viability of HPdLF cells was observed in 5% high molecular weight-HA (HMW-HA), with a median value of 127.11. hGFs showed the highest viability in 1% HMW-HA with a median value of 97.99. Within the limitations of the present study, we concluded that LMW-HA is more efficient than HMW-HA. Both HPdLF and hGF cells showed complete cell morbidity with zinc-oxide hydrogels. Therefore, zinc oxide-based gels in concentrations as low as 9% could be toxic intraorally to soft tissues that harbor gingival and periodontal ligament fibroblasts.

Silica Hydrogels as Platform for Delivery of Hyaluronic Acid

Hyaluronic acid (HA) is chondroprotective and anti-inflammatory drug used clinically for treatment of inflammatory disorders (arthritis, skin diseases, bowel diseases, etc.). In addition, HA is a crucial ingredient in the cosmetic products used to eliminate the unpleasant consequences of inflammatory skin diseases. The main disadvantages that limit its use are its low mechanical properties and its rapid biodegradation. In this paper, silica hydrogels are considered as a promising matrix for HA to improve its properties. The hybrid HA-silica hydrogels were synthesized by the sol-gel method. Morphology of the hydrogels was investigated by optical microscopy and scanning electron microscopy methods. Taking into account their potential applications for topical and injectable delivery, much attention was paid to investigation of deformation properties of the hydrogels under shear, compression, and tension. Their resistance to enzymatic degradation in vitro was estimated. Kinetics and mechanisms of HA release from the hybrid hydrogels in vitro were also studied. It was found that the indicated properties can be controlled by synthesis conditions, HA molecular weight, and its loading in the hydrogels. Silica hydrogels are a prospective platform for the development of new soft formulations and cosmetic compositions of HA with improved pharmacological and consumer properties.

Current Progress and Outlook of Nano-Based Hydrogel Dressings for Wound Healing

Wound dressing is an important tool for wound management. Designing wound dressings by combining various novel materials and drugs to optimize the peri-wound environment and promote wound healing is a novel concept. Hydrogels feature good ductility, high water content, and favorable oxygen transport, which makes them become some of the most promising materials for wound dressings. In addition, nanomaterials exhibit superior biodegradability, biocompatibility, and colloidal stability in wound healing and can play a role in promoting healing through their nanoscale properties or as carriers of other drugs. By combining the advantages of both technologies, several outstanding and efficient wound dressings have been developed. In this paper, we classify nano-based hydrogel dressings into four categories: hydrogel dressings loaded with a nanoantibacterial drug; hydrogel dressings loaded with oxygen-delivering nanomedicines; hydrogel dressings loaded with nanonucleic acid drugs; and hydrogel dressings loaded with other nanodelivered drugs. The design ideas, advantages, and challenges of these nano-based hydrogel wound dressings are reviewed and analyzed. Finally, we envisaged possible future directions for wound dressings in the context of relevant scientific and technological advances, which we hope will inform further research in wound management.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

Mesoporous bioglass capsule composite injectable hydrogels with antibacterial and vascularization promotion properties for chronic wound repair

Building an angiogenesis microenvironment and inhibiting wound infection are of great significance for chronic wound repair. In this paper, polydopamine-encapsulated mesoporous bioglass (MBG@PDA) capsules were constructed to realize the integration of angiogenesis and infection inhibition through the formation of a composite hydrogel with modified hyaluronic acid (HAMA) to promote wound healing. The experiments showed that the composite hydrogel had good adhesion and toughness and promoted the migration of fibroblasts to accelerate the epithelialization process. In addition, in the composite hydrogel, MBG@PDA could release Mg²⁺ to promote the proliferation and migration of vascular endothelial cells for angiogenesis. At the same time, MBG@PDA in the composite hydrogel could facilitate the long-term release of drugs to inhibit the growth of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) for reducing the possibility of wound infection. Finally, the results of in vivo experiments showed that a multifunctional dressing could repair wounds more quickly by promoting angiogenesis and reducing the pathological areas. In summary, the construction of these composite hydrogels can provide a repair method in the wound-repair field.

Biopolymer-Based Wound Dressings with Biochemical Cues for Cell-Instructive Wound Repair

Regenerative medicine is an active research sphere that focuses on the repair, regeneration, and replacement of damaged tissues and organs. A plethora of innovative wound dressings and skin substitutes have been developed to treat cutaneous wounds and are aimed at reducing the length or need for a hospital stay. The inception of biomaterials with the ability to interact with cells and direct them toward desired lineages has brought about innovative designs in wound healing and tissue engineering. This cellular engagement is achieved by cell cues that can be biochemical or biophysical in nature. In effect, these cues seep into innate repair pathways, cause downstream cell behaviours and, ultimately, lead to advantageous healing. This review will focus on biomolecules with encoded biomimetic, instructive prompts that elicit desired cellular domino effects to achieve advanced wound repair. The wound healing dressings covered in this review are based on functionalized biopolymeric materials. While both biophysical and biochemical cues are vital for advanced wound healing applications, focus will be placed on biochemical cues and in vivo or clinical trial applications. The biochemical cues aforementioned will include peptide therapy, collagen matrices, cell-based therapy, decellularized matrices, platelet-rich plasma, and biometals.

Oxygen-releasing hydrogels promote burn healing under hypoxic conditions

Hypoxic nonhealing wounds are a common complication in chronic patients, and chronic hypoxia is the main reason for delayed wound healing, so local wound oxygenation may be an effective way to address this problem. Here, we proposed a system consisting of oxygen-releasing microsphere (GC) and self-healing hydrogel (QGO). QGO/GC hydrogel could promote survival, migration and tube formation of human umbilical vein endothelial cells under hypoxic conditions. Moreover, QGO/GC hydrogels exhibited biocompatibility in vitro and in vivo. The hypoxic mouse burn model further confirmed that QGO/GC hydrogel could promote tissue repair by reducing inflammation (TNF-α and IL-1β), increasing angiogenesis (CD31, VEGF and α-SMA) and collagen deposition. This study provided an effective oxygen-releasing hydrogel that could offer a simple and effective method for the clinical treatment of chronic hypoxic wounds. STATEMENT OF SIGNIFICANCE: Burn injury is caused by various exogenous factors such as friction, cold, radiations, electricity, chemicals, hot surfaces or liquids. Severe burn can damage the entire skin layer, and the healing process is delayed due to an unbalanced inflammatory response, excessive reactive oxygen species, lack of angiogenesis (insufficient nutrient and oxygen availability), and susceptibility to infection. In the present study, we proposed an oxygen-releasing hydrogel (QGO/GC). QGO/GC hydrogel could promote survival, migration, and tube formation of human umbilical vein endothelial cells under hypoxic conditions. And QGO/GC hydrogels could promote tissue repair by reducing inflammation, increasing angiogenesis and collagen deposition. This work provided an effective oxygen-releasing hydrogel for the clinical management of chronic hypoxic wounds.

Polysaccharide-based hydrogels for drug delivery and wound management: a review

INTRODUCTION

Polysaccharide-based hydrogels (PBHs) offer several advantages over their synthetic counterparts. Their natural origin contributes to their nontoxicity, high biocompatibility, and in vivo biodegradability. Their properties can be tuned finely to obtain hydrogels with desired mechanical, structural, and chemical properties.

AREAS COVERED

Such versatile characteristics have potentiated the use of PBHs for the delivery of drugs, vaccines, protein and peptide therapeutics, genes, cells, probiotics, bacteriophages, and other therapeutic agents. Recent advances in hydrogel-based formulations such as nanogels, microgels, microneedles, hydrogel beads, nanocarrier-loaded hydrogels, and complexation hydrogels have enabled the precise delivery of a wide range of therapeutics. This review aims to give a holistic overview of hydrogels in the delivery of a variety of therapeutics through different routes.

EXPERT OPINION

PBHs have been used to enable the oral delivery of vaccines and other biologicals, thereby allowing self-administration of life-saving vaccines during public health emergencies. There is a lack of commercialized wound dressings for the treatment of chronic wounds. PBH-based wound dressings, especially those based on chitosan and loaded with actives and growth factors, have the potential to help in the long-term treatment of such wounds. Recent developments in the 3D printing of hydrogels can enable the quick and large-scale production of drug-loaded hydrogels.

A Nanozyme-Immobilized Hydrogel with Endogenous ROS-Scavenging and Oxygen Generation Abilities for Significantly Promoting Oxidative Diabetic Wound Healing

Non-healing wound is a common complication of diabetic patients associated with high morbidity and mortality. Engineered therapeutic hydrogels have enviable advantages in tissue regeneration, however, they are suboptimal for the healing of diabetic wounds characterized by reactive oxygen species (ROS) accumulation and chronic hypoxia. Here, a unique biological metabolism-inspired hydrogel, for ameliorating this hostile diabetic microenvironment, is presented. Consisting of natural polymers (hydrazide modified hyaluronic acid and aldehyde modified hyaluronic acid) and a metal-organic frameworks derived catalase-mimic nanozyme (ε-polylysine coated mesoporous manganese cobalt oxide), the engineered nanozyme-reinforced hydrogels can not only capture the endogenous elevated ROS in diabetic wounds, but also synergistically produce oxygen through the ROS-driven oxygen production ability. These fascinating properties of hydrogels protect skin cells (e.g., keratinocytes, fibroblasts, and vascular endothelial cells) from ROS and hypoxia-mediated death and proliferation inhibition. Diabetic wounds treated with the nanozyme-reinforced hydrogels highlight the potential of inducing the macrophages polarization from pro-inflammatory phenotype (M1) to anti-inflammatory subtype (M2). The hydrogel dressings demonstrate a prominently accelerated healing rate as shown by alleviating the excessive inflammatory, inducing efficiently proliferation, re-epithelialization, collagen deposition, and neovascularization. This work provides an effective strategy based on nanozyme-reinforced hydrogel as a ROS-driven oxygenerator for enhancing diabetic wound healing.

Recent Progress on Hyaluronan-Based Products for Wound Healing Applications

Hyaluronic acid (HA) based nanocomposites are considered excellent for improving wound healing. HA is biocompatible, biodegradable, non-toxic, biologically active, has hemostatic ability, and resists bacterial adhesion. HA-based nanocomposites promote wound healing in four different sequential phases hemostasis, inflammation, proliferation, and maturation. The unique biological characteristics of HA enable it to serve as a drug, an antibacterial agent, and a growth factor, which combine to accelerate the healing process. In this review, we focus on the use of HA-based nanocomposites for wound healing applications and we describe the importance of HA for the wound healing process in each sequential phase, such as hemostasis, inflammation, proliferation, and maturation. Metal nanoparticles (MNPs) or metal oxide nanoparticles (MO-NPs) loaded with HA nanocomposite are used for wound healing applications. Insights into important antibacterial mechanisms are described in HA nanocomposites. Furthermore, we explain antibiotics loaded with HA nanocomposite and its combination with the MNPs/MO-NPs used for wound healing applications. In addition, HA derivatives are discussed and used in combination with the other polymers of the composite for the wound healing process, as is the role of the polymer in wound healing applications. Finally, HA-based nanocomposites used for clinical trials in animal models are presented for wound healing applications.