TiO2 photocatalysis: Design and applications

Application of polyoxometalates in photocatalytic degradation of organic pollutants

Organic pollutants are highly toxic, accumulative, and difficult to degrade or eliminate. As a low-cost, high-efficiency and energy-saving environmental purification technology, photocatalytic technology has shown great advantages in solving increasingly serious environmental pollution problems. The development of efficient and durable photocatalysts for the degradation of organic pollutants is the key to the extensive application of photocatalysis technology. Polyoxometalates (POMs) are a kind of discrete metal-oxide clusters with unique photo/electric properties which have shown promising applications in photocatalytic degradation. This review summarizes the recent advances in the design and synthesis of POM-based photocatalysts, as well as their application in the degradation of organic dyes, pesticides and other pollutants. In-depth perspective views are also proposed in this review.

Boosting Piezo/Photo-Induced Charge Transfer of CNT/Bi4O5I2 Catalyst for Efficient Ultrasound-Assisted Degradation of Rhodamine B

Strain-induced internal electric fields present a significant path to boosting the separation of photoinduced electrons and holes. In addition, piezo-induced positive/negative pairs could be released smoothly, taking advantage of the excellent electroconductibility of some conductors. Herein, the hybrid piezo-photocatalysis is constructed by combining debut piezoelectric nanosheets (Bi4O5I2) and typical conductor multiwalled carbon nanotubes (CNT). The photocatalytic degradation efficiency that the hybrid CNT/Bi4O5I2 exhibits was remarkably increased by more than 2.3 times under ultrasonic vibration, due to the piezo-generated internal electric field. In addition, the transient photocurrent spectroscopy and electrochemical impedance measurement reveal that the CNT coating on Bi4O5I2 enhances the piezo-induced positive/negative migration. Therefore, the piezocatalytic activity of CNT/Bi4O5I2 could be improved by three times, compared with pure Bi4O5I2 nanosheets. Our results may offer promising approaches to sketching efficient piezo-photocatalysis for the full utilization of solar energy or mechanical vibration.

Assessment of the Arsenic Removal From Water Using Lanthanum Ferrite

The catalytic performance of a perovskite-type lanthanum ferrite LaFeO3 to remove arsenic from water has been investigates for the first time. LaFeO3 was prepared by citrate auto-combustion of dry gel obtained from a solution of the corresponding nitrates poured into citric acid solution. Kinetic studies were performed in the dark with As(V) and in the dark and under UV-C irradiation at pH 6-7 with As(III) (both 1 mg L-1 ), and As : Fe molar ratios (MR) of 1 : 10 and 1 : 100 using the LaFeO3 catalyst. As(V) was removed from solution after 60 min in the dark in 7 % and in 47 % for MR=1 : 10 and MR=1 : 100, respectively, indicating the importance of the amount of the iron material on the removal. Oxidation of As(III) in the dark was negligible after 60 min in contact with the solid sample, but complete removal of As(III) was observed within 60 min of irradiation at 254 nm, due to As(III) photooxidation to As(V) and to As(III) sorption to a minor extent. Morphological and microstructural studies of the catalyst complement the catalytic testing. This work demonstrates that LaFeO3 can be used for the removal of As(III) from highly arsenic contaminated water.

Antimicrobial Efficacy and Spectrum of Phosphorous-Fluorine Co-Doped TiO2 Nanoparticles on the Foodborne Pathogenic Bacteria Campylobacter jejuni, Salmonella Typhimurium, Enterohaemorrhagic E. coli, Yersinia enterocolitica, Shewanella putrefaciens, Listeria monocytogenes and Staphylococcus aureus

Contamination of meats and meat products with foodborne pathogenic bacteria raises serious safety issues in the food industry. The antibacterial activities of phosphorous-fluorine co-doped TiO2 nanoparticles (PF-TiO2) were investigated against seven foodborne pathogenic bacteria: Campylobacter jejuni, Salmonella Typhimurium, Enterohaemorrhagic E. coli, Yersinia enterocolitica, Shewanella putrefaciens, Listeria monocytogenes and Staphylococcus aureus. PF-TiO2 NPs were synthesized hydrothermally at 250 °C for 1, 3, 6 or 12 h, and then tested at three different concentrations (500 μg/mL, 100 μg/mL, 20 μg/mL) for the inactivation of foodborne bacteria under UVA irradiation, daylight exposure or dark conditions. The antibacterial efficacies were compared after 30 min of exposure to light. Distinct differences in the antibacterial activities of the PF-TiO2 NPs, and the susceptibilities of tested foodborne pathogenic bacterium species were found. PF-TiO2/3 h and PF-TiO2/6 h showed the highest antibacterial activity by decreasing the living bacterial cell number from ~106 by ~5 log (L. monocytogenes), ~4 log (EHEC), ~3 log (Y. enterolcolitca, S. putrefaciens) and ~2.5 log (S. aureus), along with complete eradication of C. jejuni and S. Typhimurium. Efficacy of PF-TiO2/1 h and PF-TiO2/12 h NPs was lower, typically causing a ~2-4 log decrease in colony forming units depending on the tested bacterium while the effect of PF-TiO2/0 h was comparable to P25 TiO2, a commercial TiO2 with high photocatalytic activity. Our results show that PF-co-doping of TiO2 NPs enhanced the antibacterial action against foodborne pathogenic bacteria and are potential candidates for use in the food industry as active surface components, potentially contributing to the production of meats that are safe for consumption.

Photocatalytic Degradation of Plastic Waste: A Mini Review

Plastic waste becomes an immediate threat to our society with ever-increasing negative impacts on our environment and health by entering our food chain. Sunlight is known to be the natural energy source that degrades plastic waste at a very slow rate. Mimicking the role of sunlight, the photocatalytic degradation process could significantly accelerate the degradation rate thanks to the photocatalyst that drastically facilitates the photochemical reactions involved in the degradation process. This mini review begins with an introduction to the chemical compositions of the common plastic waste. The mechanisms of photodegradation of polymers in general were then revisited. Afterwards, a few photocatalysts were introduced with an emphasis on titanium dioxide (TiO2), which is the most frequently used photocatalyst. The roles of TiO2 photocatalyst in the photodegradation process were then elaborated, followed by the recent advances of photocatalytic degradation of various plastic waste. Lastly, our perspectives on the future research directions of photocatalytic plastic degradation are present. Herein, the importance of catalytic photodegradation is emphasized to inspire research on developing new photocatalysts and new processes for decomposition of plastic waste, and then to increase its recycling rate particularly in the current pandemic with the ever-increasing generation of plastic waste.

Controlled growth of ultrasmall Cu2O clusters on TiO2nanoparticles by atmospheric-pressure atomic layer deposition for enhanced photocatalytic activity

This work presents a gas-phase approach for the synthesis of Cu₂O/TiO₂powder-based photocatalysts using atomic layer deposition (ALD). The process is carried out in a fluidized bed reactor working at atmospheric pressure using (trimethylvinylsilyl)-hexafluoroacetulacetonate copper(I) as the Cu-precursor and H₂O vapor as the oxidizer. The saturating regime of the chemical reactions and the linear growth of ALD are achieved. In combination with the unsaturated regime, the ALD approach enables the deposition of ultrasmall Cu₂O clusters with average diameters in the range of 1.3-2.0 nm, narrow particle size distributions and tunable Cu₂O loadings on P25 TiO₂nanoparticles. The photocatalytic performance of Cu₂O/TiO₂photocatalysts is investigated by the degradation of organic dyes, including Rhodamine B (RhB), methyl orange, and methylene blue; the results demonstrate that the surface modification of TiO₂nanoparticles by Cu₂O nanoclusters significantly enhances the photocatalytic activity of TiO₂. This is attributed to the efficient charge transfer between Cu₂O and TiO₂that reduces the charge recombination. The photocatalytic reaction mechanism is further investigated for the degradation of RhB, revealing the dominating role of holes, which contribute to both direct hole oxidation and indirect oxidation (i.e. via the formation of hydroxyl radicals). Our approach provides a fast, scalable and efficient process to deposit ultrasmall Cu₂O clusters in a controllable fashion for surface engineering and modification.

Chemical removal of m-cresol: a critical review

m-Cresol containing wastewater has generally become a globally environmental issue due to its refractory and high toxicity towards plants, animals and human being. The development of m-cresol related industries increases the risk of excessive m-cresol discharge, making high efficiency methods to treat m-cresol an urgent topic in both economic and environmental aspects. This review focuses on the chemical treatment methods of m-cresol wastewater, including chemical adsorption, photocatalytic degradation, electrocatalytic degradation and catalytic wet oxidation. The efficiency, cost and process optimization of different methods are discussed in detail. Chemical adsorption is convenient but has relatively low efficiency. Photocatalytic degradation is an easily operated technology with high efficiency, but the selection of catalyst is too limited and the cost of light source is relatively high. Electrocatalytic degradation is time-saving but energy-intensive, and operational difficulty brings a barrier to industrialization. Catalytic wet oxidation (CWO) is highly effective and easily modified, but the performance and stability of catalysts are still very moderate. Following this, the selection and application of different methods regarding the requirement of actual environment are analyzed. Finally, a perspective on the opportunities and development for efficient m-cresol removal method is given.

Abiotic oxidation of arsenite in natural and engineered systems: Mechanisms and related controversies over the last two decades (1999-2020)

Abiotic oxidation of toxic As(III) to As(V) is being deemed as a necessary step for the overall arsenic decontamination in both natural and engineered systems. Direct oxidation of As(III) by chemical oxidants, such as ozone, permanganate, ferrate, chlorine and chloramine, or naturally occurring minerals like Mn, Fe oxides, seems straightforward. Both O₂ and H₂O₂ are ineffective for arsenite oxidation, but they can be activated by reducing substances like Fe²⁺, Fe⁰ to increase the oxidation rates. Photo-induced oxidation of As(III) has been demonstrated effective in Fe complexes or minerals, NO₃^-/NO₂^-, dissolved organic matter (DOM), peroxygens and TiO₂ systems. Although a variety of oxidation methods have been developed over the past two decades, there remain many scientific and technical challenges that must be overcome before the rapid progress in basic knowledge can be translated into environmental benefits. To better understand the trends in the existing data and to identify the knowledge gaps, this review describes in detail the complicated mechanisms for As(III) oxidation by various methods and emphasizes on the conflicting data and explanation. Some prevailing concerns and challenges in the sphere of As(III) oxidation are also pointed out so as to appeal to researchers for further investigations.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

Activity Enhancement of P25 Titanium Dioxide by Zinc Oxide for Photocatalytic Phenol Degradation

As a benchmark photocatalyst, P25 titanium dioxide (TiO2) nanomaterial has been widely reported for its remarkable photocatalytic activity under ultraviolet (UV) irradiation. However, approaches to further improve the photocatalytic activity of the P25 TiO2 are still required. In the present work, we reported the activity enhancement of the P25 TiO2 up to more than five times higher rate constant for phenol degradation when the P25 TiO2 was coupled with zinc oxide (ZnO). The composites were prepared by a physical mixing method of P25 TiO2 and ZnO with various weight ratios of 1:0.5, 1:1, and 1:2. The composite materials were then characterized using X-ray diffraction (XRD), diffuse-reflectance ultraviolet-visible (DR UV-vis), Fourier transform infrared (FTIR), and fluorescence spectroscopies. All the composites gave better activity than the P25 TiO2, in which the TiO2/ZnO 1:1 composite material exhibited the highest first-order reaction rate constant (0.43 h−1). This remarkable enhanced degradation rate was much higher than that of the unmodified TiO2 (0.08 h−1) and ZnO (0.13 h-1). The fluorescence study revealed that the electron-hole recombination on the P25 TiO2 could be suppressed by the ZnO, which would be the reason for such activity enhancement. A study on the effect of the scavenger showed that the hydroxyl radicals played a crucial role in the photocatalytic phenol degradation. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

LED-driven controlled deposition of Ni onto TiO2 for visible-light expanded conversion of carbon dioxide into C1-C2 alkanes

Photocatalytic gas-phase hydrogenation of CO2 into alkanes was achieved over TiO2-supported Ni nanoparticles under LED irradiation at 365 nm, 460 nm and white light. The photocatalysts were prepared using photo-assisted deposition of Ni salts under LED irradiation at 365 nm onto TiO2 P25 nanoparticles in methanol as a hole scavenger. This procedure yielded 2 nm Ni particles decorating the surface of TiO2 with a nickel mass content of about 2%. Before the photocatalytic runs, Ni/TiO2 was submitted to thermal reduction at 400 °C in a 10% H2 atmosphere which induced O-defective TiO2-x substrates. The formation of oxygen vacancies, Ti3+ centers and metallic Ni sites upon photocatalytic CO2 hydrogenation was confirmed by operando EPR analysis. In situ XPS under reaction conditions suggested a strong metal-support interaction and the co-existence of zero and divalent Ni states. These photoactive species enhanced the photo-assisted reduction of CO2 below 300 °C to yield CO, CH4 and C2H6 as final products.

The Evolution of Photocatalytic Membrane Reactors over the Last 20 Years: A State of the Art Perspective

The research on photocatalytic membrane reactors (PMRs) started around the year 2000 with the study of wastewater treatment by degradation reactions of recalcitrant organic pollutants, and since then the evolution of our scientific knowledge has increased significantly, broadening interest in reactions such as the synthesis of organic chemicals. In this paper, we focus on some initial problems and how they have been solved/reduced over time to improve the performance of processes in PMRs. Some know-how gained during these last two decades of research concerns decreasing/avoiding the degradation of the polymeric membranes, improving photocatalyst reuse, decreasing membrane fouling, enhancing visible light photocatalysts, and improving selectivity towards the reaction product(s) in synthesis reactions (partial oxidation and reduction). All these aspects are discussed in detail in this review. This technology seems quite mature in the case of water and wastewater treatment using submerged photocatalytic membrane reactors (SPMRs), while for applications concerning synthesis reactions, additional knowledge is required.

Preparation and characterization of k-carrageenan/konjac glucomannan/TiO2 nanocomposite film with efficient anti-fungal activity and its application in strawberry preservation

A nano-composite film was prepared from k-carrageenan (KC), konjac glucomannan (KGM) and TiO₂ nanoparticles (NPs) by solvent casting method. The morphology and structure of the KC/KGM based nano-composite films prepared from different weight ratio of TiO₂ NPs were characterized by SEM, XRD and FT-IR techniques. The addition of TiO₂ NPs to KC/KGM films improved the mechanical, thermal, structural, and barrier properties of nano-composite films. In particular, the film containing 7 wt% of TiO₂ NPs exhibited effective photocatalytic anti-fungal activity (79%) for Penicillium viridicatum after irradiating 6 h through generating reactive oxygen species thus destroying the fungi. Benefitting from the improved characteristics investigated above, the nano-composite films showed a favorable effect on strawberry storage. Overall, the fabricated KC/KGM/TiO₂ nano-composite films have a broad application in the field of food preservation and packaging applications.

Eco-Friendly Colloidal Aqueous Sol-Gel Process for TiO2 Synthesis: The Peptization Method to Obtain Crystalline and Photoactive Materials at Low Temperature

This work reviews an eco-friendly process for producing TiO2 via colloidal aqueous sol–gel synthesis, resulting in crystalline materials without a calcination step. Three types of colloidal aqueous TiO2 are reviewed: the as-synthesized type obtained directly after synthesis, without any specific treatment; the calcined, obtained after a subsequent calcination step; and the hydrothermal, obtained after a specific autoclave treatment. This eco-friendly process is based on the hydrolysis of a Ti precursor in excess of water, followed by the peptization of the precipitated TiO2. Compared to classical TiO2 synthesis, this method results in crystalline TiO2 nanoparticles without any thermal treatment and uses only small amounts of organic chemicals. Depending on the synthesis parameters, the three crystalline phases of TiO2 (anatase, brookite, and rutile) can be obtained. The morphology of the nanoparticles can also be tailored by the synthesis parameters. The most important parameter is the peptizing agent. Indeed, depending on its acidic or basic character and also on its amount, it can modulate the crystallinity and morphology of TiO2. Colloidal aqueous TiO2 photocatalysts are mainly being used in various photocatalytic reactions for organic pollutant degradation. The as-synthesized materials seem to have equivalent photocatalytic efficiency to the photocatalysts post-treated with thermal treatments and the commercial Evonik Aeroxide P25, which is produced by a high-temperature process. Indeed, as-prepared, the TiO2 photocatalysts present a high specific surface area and crystalline phases. Emerging applications are also referenced, such as elaborating catalysts for fuel cells, nanocomposite drug delivery systems, or the inkjet printing of microstructures. Only a few works have explored these new properties, giving a lot of potential avenues for studying this eco-friendly TiO2 synthesis method for innovative implementations.

Fabrication of Titanium Dioxide/Carbon Fiber (TiO2/CF) Composites for Removal of Methylene Blue (MB) from Aqueous Solution with Enhanced Photocatalytic Activity

TiO2 powder was firstly synthesized and carbon fiber was secondly prepared via the carbonization of polyaniline fiber, and TiO2/carbon fiber composites were lastly synthesized via a simple method at room temperature. The prepared samples are evidently investigated by X-ray powder diffraction, scanning electron microscopy, energy dispersive spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, photoluminescence spectrum, and X-ray photoelectron spectroscopy, respectively. Using the monochromatic light of ultraviolet, the photocatalytic activity of the TiO2/CF composites was accurately evaluated with respect to the degradation of an aqueous dye (methylene blue) solution. The relationship between the photocatalytic degradation of methylene blue dye and its ratio, contact time, and the amount of catalyst was studied. The kinetics and mechanisms of degradation were discussed. The results show that TiO2/CF composites have good photocatalytic activity and stability. The TiO2/CF2/1 composite was used in effective photocatalytic degradation of methylene blue, the weight ratio of TiO2 to carbon fiber was 2:1, and the degradation rate was obtaining up to 97.7% of degradation during 120 min of reaction. The photocatalytic stability of TiO2/CF composites was dependent on the stability of their structure. After 5 repeated uses, the composite TiO2/CF2/1 still exhibited rather high activity toward the degradation of methylene blue, where the decolorization efficiency of methylene blue achieved 92% and the loss of activity was negligible. Based on radical trapping experiments, the mechanism of TiO2/CF composites on photocatalytic degradation of methylene blue is proposed, which could explain the enhanced photocatalytic activity of the composites better. Superoxide radicals, photogenerated holes, and photogenerated electrons were the main active substances for methylene blue degradation.

Mechanistic insights into 2,4-D photoelectrocatalytic removal from water with TiO2 nanotubes under dark and solar light irradiation

Removal of recalcitrant pollutants from water is a major challenge, to which the photoelectrocatalytic processes may be a solution. Applied potential plays a key role in the photocatalytic activity of the semiconductor. This paper investigated the effect of applied potential on the photoelectrocatalytic oxidation of 2,4-Dichlorophenoxyacetic acid (2,4-D) with TiO₂ nanotubular anodes under solar light irradiation. The process was investigated at constant potentials in different regions of the polarization curve: the ohmic region, the saturation region and in the region of the Schottky barrier breakdown. PEC tests were performed in aqueous solutions of 2,4-D, and in the presence of methanol or formic acid, as scavengers of OH^• radicals and holes. Results showed the main mechanism is oxidation by OH^• radicals from water oxidation, while runs with hole scavenger revealed a second mechanism of direct oxidation by holes photogenerated at the electrode surface, with high removal rates due to current doubling effect.

In situ formation of 2-thiobarbituric acid incorporated g-C3N4 for enhanced visible-light-driven photocatalytic performance

Embedding heterocycles into the skeleton of g-C₃N₄ has been proved to be a simple and efficient strategy for improving light response and the separation of photo-excited charges. Herein, 2-thiobarbituric acid incorporated g-C₃N₄ (TBA/CN) with good photocatalytic efficiency for Rh B degradation and H₂ production was successfully achieved via a facile thermal copolymerization approach. The incorporation of aromatics and S atoms into the skeleton of g-C₃N₄ was identified via systematic characterizations. This unique structure contributed to the narrowed band-gap, extended delocalization of lone pair electrons and changed electron transition pathway, which led to the enhanced visible light utilization, accelerated charge migration and prolonged electron lifetime, subsequently resulting in the significant boost of photocatalytic activity. The optimal TBA/CN-3 sample yielded the largest Rh B degradation rate constant k value of 0.0273 min⁻¹ and simultaneously highest rate of H₂ evolution of 0.438 mmol g⁻¹ h⁻¹, which were almost 3.5 and 3.8 folds as fast as that of the pristine CN, respectively. Finally, the photocatalytic mechanism was proposed for the detailed elucidation of the process of Rh B degradation coupled with H₂ production.

Embedding heterocycles into the skeleton of g-C₃N₄ has been proved to be a simple and efficient strategy for improving light response and the separation of photo-excited charges.

Tunable Adhesive Self-Cleaning Coating with Superhydrophobicity and Photocatalytic Activity

Superhydrophobic coatings with intelligent properties have attracted much attention because of their wide application in many fields. However, there is a limited amount of literature on superhydrophobic coatings whose wettability and adhesion can be adjusted by UV irradiation and calcination at the same time. In this study, amorphous SiO₂ microspheres (A-SiO₂) and nano-TiO₂ particles (N-TiO₂) were used to fabricate A-SiO₂/N-TiO₂ composites by wet grinding, and then, they were modified with polydimethylsiloxane (PDMS) and sprayed onto substrate surfaces to obtain a tunable adhesive superhydrophobic A-SiO₂/N-TiO₂@PDMS coating. It is worth noting that the wettability and adhesion of the coating to water droplets could be adjusted by UV irradiation and calcination. The mechanisms of the aforementioned phenomena were studied. Moreover, methyl orange solution could be degraded by the coating due to its photocatalysis. The as-prepared coating had good adaptation to different substrates and outdoor environments. Moreover, the surfaces of these coatings exhibited the same liquid repellency towards different droplets. This research provides an environmental strategy to prepare advanced self-cleaning coatings.

An Inorganic/Organic S-Scheme Heterojunction H2 -Production Photocatalyst and its Charge Transfer Mechanism

Inspired by natural photosynthesis, constructing inorganic/organic heterojunctions is regarded as an effective strategy to design high-efficiency photocatalysts. Herein, a step (S)-scheme heterojunction photocatalyst is prepared by in situ growth of an inorganic semiconductor firmly on an organic semiconductor. A new pyrene-based conjugated polymer, pyrene-alt-triphenylamine (PT), is synthesized via the typical Suzuki-Miyaura reactions, and then employed as a substrate to anchor CdS nanocrystals. The optimized CdS/PT composite, coupling 2 wt% PT with CdS, exhibits a robust H₂ evolution rate of 9.28 mmol h^-1 g^-1 with continuous release of H₂ bubbles, as well as a high apparent quantum efficiency of 24.3%, which is ≈8 times that of pure CdS. The S-scheme charge transfer mechanism between PT and CdS, is systematically demonstrated by photoirradiated Kelvin probe measurement and in situ irradiated X-ray photoelectron spectroscopy analyses. This work provides a protocol for preparing specific S-scheme heterojunction photocatalysts on the basis of inorganic/organic coupling.

Influence of terbium (III) ions on the photocatalytic activity of TiO2 and CeO2 for the degradation of methylene blue in industrial effluents

This study reports the preparation of TiO₂ and CeO₂ doped with different quantities of terbium and discusses the influence of this dopant on the photocatalytic activity of the semiconductors, with respect to the degradation of methylene blue, under ultraviolet and solar radiations. The oxides obtained were characterized by X-ray diffraction, infrared vibrational spectroscopy, diffuse reflectance spectroscopy, scanning electron microscopy, and dispersive energy spectroscopy. The results indicate that the presence of the dopant in TiO₂ favored the formation of the anatase crystalline phase to the detriment of rutile, increased the band gap energy, and decreased the size of the nanoparticles. Doping CeO₂ with Tb resulted in a fluorite-type crystalline structure, reduced band gap, and smaller particle size. The photocatalytic activity decreases as the concentration of terbium increases regardless of the radiation source and nature of the oxide. Furthermore, a better performance was observed for all semiconductors excited by solar radiation in comparison to ultraviolet light. The samples of pure TiO₂ and TiO₂ doped with 0.5 and 1% terbium showed total removal of the dye after less than 120 min of reaction, while the samples of pure CeO₂ and CeO₂ doped with 0.5% terbium showed approximately 80% and 57% of dye removal after 120 min, suggesting that these materials can be promising for the treatment of industrial effluents.

One-step synthesis of black TiO2-x microspheres by ultrasonic spray pyrolysis process and their visible-light-driven photocatalytic activities

Black TiO_2-x has recently emerged as one of the most promising visible-light-driven photocatalysts, but current synthesis routes that require a reduction step are not compatible with cost-effective mass production and a relatively large particle such as microspheres. Herein, we demonstrate a simple, fast, cost-effective and scalable one-step process based on an ultrasonic spray pyrolysis for the synthesis of black TiO_2-x microspheres. The process utilizes an oxygen-deficient environment during the pyrolysis of titanium precursors to directly introduce oxygen vacancies into synthesized TiO₂ products, and thus a reduction step is not required. Droplets of a titanium precursor solution were generated by ultrasound energy and dragged with continuous N₂ flow into a furnace for the decomposition of the precursor and crystallization to TiO₂ and through such a process spherical black TiO_2-x microspheres were obtained at 900 °C. The synthesized black TiO_2-x microsphere with trivalent titanium/oxygen vacancy clearly showed the variation of physicochemical properties compared with those of white TiO₂. In addition, the synthesized microspheres presented the superior photocatalytic activity for degradation of methylene blue under visible light irradiation. This work presents a new methodology for a simple one-step synthesis of black metal oxides microspheres with oxygen vacancies for visible-light-driven photocatalysts with a higher efficiency.

Construction of 2D layered TiO2@MoS2heterostructure for efficient adsorption and photodegradation of organic dyes

In this work, heterostructures of coupled TiO₂@MoS₂with different phases of MoS₂were synthesized via hydrothermal technique. The prepared materials were thoroughly characterized using various techniques, including XRD, SEM, transmission electron microscopy, Brunauer-Emmet-Teller, XPS, Zeta potential and UV-vis spectroscopy. The optimized nanocomposites were tested for the photocatalytic degradation of methyl Orange (MO) under visible light as well as the adsorption of Rhodamine b (RhB) and methelene blue (MB) dyes. The TiO₂@1T/2H-MoS₂heterostructures exhibited a narrow bandgap compared to the other studied nanomaterials. A remarkable photodegradation efficiency of TiO₂@1T/2H-MoS₂was observed, which completely degraded 20 ppm of MO after 60 min with high stability over four successive cycles. This can be assigned to the formation of unique heterostructures with aligned energy bands between MoS₂nanosheets and TiO₂nanobelts. The formation of these novel interfaces promoted the electron transfer and increased the separation efficiency of carriers, resulting in high photocatalytic degradation. Furthermore, the adsorption efficiency of TiO₂@1T/2H-MoS₂was unique, 20 ppm solutions of RhB and MB were removed after 1 and 2 min, respectively. The superior adsorption performance of the TiO₂@1T/2H-MoS₂can be attributed to its high surface area (279.9 m²g^-1) and the rich concentration of active sites. The kinetics and the isothermal analysis revealed that the TiO₂@1T/2H MoS₂heterstructures have maximum adsorption capacity of 1200 and 970 mg g^-1for RhB and MB, respectively. This study provides a powerful way for designing an effective photocatalyst and adsorbent TiO₂-based nanocomposites for water remediation.

A Review of Photocatalytic Materials for Urban NOx Remediation

NOx is a pervasive pollutant in urban environments. This review assesses the current state of the art of photocatalytic oxidation materials, designed for the abatement of nitrogen oxides (NOx) in the urban environment, and typically, but not exclusively based on titanium dioxide (TiO2). Field trials with existing commercial materials, such as paints, asphalt and concrete, in a range of environments including street canyons, car parks, tunnels, highways and open streets, are considered in-depth. Lab studies containing the most recent developments in the photocatalytic materials are also summarised, as well as studies investigating the impact of physical parameters on their efficiency. It is concluded that this technology may be useful as a part of the measures used to lower urban air pollution levels, yielding ∼2% NOx removal in the immediate area around the surface, for optimised TiO2, in some cases, but is not capable of the reported high NOx removal efficiencies >20% in outdoor urban environments, and can in some cases lower air quality by releasing hazardous by-products. However, research into new material is ongoing. The reason for the mixed results in the studies reviewed, and massive range of removal efficiencies reported (from negligible and up to >80%) is mainly the large range of testing practices used. Before deployment in individual environments site-specific testing should be performed, and new standards for lab and field testing should be developed. The longevity of the materials and their potential for producing hazardous by-products should also be considered.

Enhanced Photocatalytic Degradation of Perfluorooctanoic Acid by Mesoporous Sb2O3/TiO2 Heterojunctions

Perfluorooctanoic acid (PFOA), a typical perfluorinated carboxylic acid, is an emerging type of permanent organic pollutants that are regulated by the Stockholm Convention. The degradation of PFOA, however, is quite challenging largely due to the ultra-high stability of C-F bonds. Compared with other techniques, photocatalytic degradation offers the potential advantages of simple operation under mild conditions as well as exceptional decomposition and defluorination efficiency. Titanium dioxide (TiO₂) is one of the most frequently used photocatalysts, but so far, the pristine nanosized TiO₂ (e.g., the commercial P25) has been considered inefficient for PFOA degradation, since the photo-generated hydroxyl radicals from TiO₂ are not able to directly attack C-F bonds. Mesoporous Sb₂O₃/TiO₂ heterojunctions were therefore rationally designed in this work, of which the confined Sb₂O₃ nanoparticles in mesoporous TiO₂ framework could not only tune the band structure and also increase the number of active sites for PFOA degradation. It was found that, after loading Sb₂O₃, the absorption of UV light was enhanced, indicating a higher efficiency of light utilization; while the band gap was reduced, which accelerated the separation of photo-generated charge carriers; and most importantly, the valence band edge of the Sb₂O₃/TiO₂ heterojunction was significantly lifted so as to prevent the occurrence of hydroxyl radical pathway. Under the optimal ratio of Sb₂O₃–TiO₂, the resulting catalysts managed to remove 81.7% PFOA in 2 h, with a degradation kinetics 4.2 times faster than the commercial P25. Scavenger tests and electron spin resonance spectra further revealed that such improvement was mainly attributed to the formation of superoxide radicals and photo-generated holes, in which the former drove the decarboxylation from C₇F₁₅COOH–C₇F₁₅^•, and the latter promoted the direct electron transfer for the conversion of C₇F₁₅COO⁻–C₇F₁₅COO^•. The Sb₂O₃/TiO₂ photocatalysts were highly recyclable, with nearly 90% of the initial activity being retained after five consecutive cycles, guaranteeing the feasibility of long-term operation.

Photocatalytic Degradation of Sulfolane Using a LED-Based Photocatalytic Treatment System

Sulfolane is an emerging industrial pollutant detected in the environments near many oil and gas plants in North America. So far, numerous advanced oxidation processes have been investigated to treat sulfolane in aqueous media. However, there is only a few papers that discuss the degradation of sulfolane using photocatalysis. In this study, photocatalytic degradation of sulfolane using titanium dioxide (TiO2) and reduced graphene oxide TiO2 composite (RGO-TiO2) in a light-emitting diode (LED) photoreactor was investigated. The impact of different waters (ultrapure water, tap water, and groundwater) and type of irradiation (UVA-LED and mercury lamp) on photocatalytic degradation of sulfolane were also studied. In addition, a reusability test was conducted for the photocatalyst to examine the degradation of sulfolane in three consecutive cycles with new batches of sulfolane-contaminated water. The results show that LED-based photocatalysis was effective in degrading sulfolane in waters even after three photocatalytic cycles. UVA-LEDs displayed more efficient use of photon energy when compared with the mercury lamps as they have a narrow emission spectrum coinciding with the absorption of TiO2. The combination of UVA-LED and TiO2 yielded better performance than UVA-LED and RGO-TiO2 for the degradation of sulfolane. Much lower sulfolane degradation rates were observed in tap water and groundwater than ultrapure water.

Single step synthesis of WO3 nanoparticles by wire explosion process and its photocatalytic behaviour

Tungsten (W) wires are exploded in oxygen ambience to get tungsten oxide (WO3) nanoparticles (NPs). Energy stored in the capacitors (EC) is used to overcome the sublimation energy of wire. Energy ratio (K, ratio of EC and sublimation energy) and oxygen pressure (P) are two control parameters for the particle phase and morphology in the wire explosion process. X-ray diffraction (XRD) patterns confirmed the partial oxidation of W for low values of K. For K = 2, oxidation increases with increase in P. For K = 10, complete oxidation was achieved irrespective of P. Particles are spherical in shape as observed from scanning electron microscope (SEM) and transmission electron microscope (TEM) micrographs. Particle size follows a log-normal distribution with a least mean size of 24.1 nm. UV-vis diffuse reflectance spectroscopy (DRS) was used to measure the absorbance of NPs (complete WO3 with least mean size) for band gap measurement. The band gap was found to be 2.92 eV (visible region). NPs are used as photocatalyst to degrade aqueous solution of methylene blue (MB) under visible light irradiation. 500 mg l−1 of WO3 NPs were optimum to degrade 10 mg l−1 MB in 120 min.

Understanding the Structural and Electronic Properties of Photoactive Tungsten Oxide Nanoparticles from Density Functional Theory and GW Approaches

Tungsten trioxide (WO₃)-derived nanostructures have emerged recently as feasible semiconductors for photocatalytic purposes due to their visible-light harvesting that overcomes the drawbacks presented by TiO₂-derived nanoparticles (NPs). However, applications are still limited by the lack of fundamental knowledge at the nanoscale due to poor understanding of the physical processes that affect their photoactivity. To fill this gap, we report here a detailed computational study using a combined density functional theory (DFT)-GW scheme to investigate the electronic structure of realistic WO₃ NPs containing up to 1680 atoms. Different phases and morphologies are considered to provide reliable structure-property relationships. Upon proper benchmark of our DFT-GW methodology, we use this highly accurate approach to establish relevant rules for the design of photoactive WO₃ nanostructures by pointing out the most stable morphologies at the nanoscale and the appropriate size regime at which the photoactive efficiency is enhanced.

Toluene degradation by heterogeneous photocatalysis assisted with ozone in a tubular reactor: analysis over the reactor length

Volatile organic compounds (VOCs) are atmospheric pollutants that can affect human healthy and intensify some environmental problems. Among different techniques to degrade VOCs, heterogeneous photocatalysis has been highlighted. The aim of this research was to obtain high toluene degradation using heterogeneous photocatalysis in the ozone presence (TiO₂/O₃/UV) and analyze VOC degradation over the reactor length comparing with ozone concentration also over the reactor length. Ozone concentration has influence on toluene degradation; 75% of VOC degradation was reached with 69.0 mgL^-1 of O₃ meanwhile a degradation of 91% was obtained with 96.2 mgL^-1 of O₃. Toluene degradation reached a plateau over reactor length at flowrate of 565 mL min^-1, which indicates the reactor was oversized in this case. However, it was not observed at 1425 mL min^-1. In addition, it was evaluated that O₃ concentration and toluene reaction rate decreased over the reactor length.

Surfactant-coupled titanium dioxide coated iron-aluminium mixed metal hydroxide for magnetic solid phase extraction of bisphenols in carbonated beverages

In this work, the magnetic sorbents based on different surfactant-coupled titanium dioxide coated iron-aluminium mixed metal hydroxide were investigated as sorbent for extraction of bisphenol compounds. The structure, morphology, and magnetic property of the synthesized sorbents were investigated. The cetyltrimethylammonium bromide-titanium dioxide coated iron-aluminium mixed metal hydroxide (Fe-Al MMH@TiO2-CTAB) exhibited excellent extraction performance toward bisphenols and was selected as the sorbent for development of magnetic solid phase extraction (MSPE) method. The entire MSPE process was optimized, and the extract was analyzed by high performance liquid chromatography with photodiode array detector. The method provided wide linear calibration ranges for bisphenols between 0.3-6000 μg L-1 with maximum enrichment factors of 280. The limits of detection and limits of quantification were in the ranges of 0.08-0.3 and 0.3-1.0 μg L-1, respectively. The proposed MSPE method was tested for determination of bisphenols in carbonated beverages. The studied carbonated beverages were mostly free of bisphenol contamination; however, BPS, BPA and BPB were detected in samples taken from defective cans. The relative recoveries ranging of 80.2-118.9% were obtained. The as-prepared Fe-Al MMH@TiO2-CTAB sorbent provided high sorption capacities in the range of 2215-2451 mg kg-1 and could be a promising material for bisphenols in beverage samples.

In situ X-ray absorption spectroscopic studies of photocatalytic oxidation of As(III) to less toxic As(V) by TiO2 nanotubes

Arsenic in groundwater caused the black-foot disease (BFD) in many countries in the 1950-1960s. It is of great importance to develop a feasible method for removal of arsenic from contaminated groundwater in BFD endemic areas. Photocatalytic oxidation of As(III) to less toxic As(V) is, therefore, of significance for preventing any arsenic-related disease that may occur. By in situ synchrotron X-ray absorption spectroscopy, the formation of As(V) is related to the expense of As(III) disappearance during photocatalysis by TiO₂ nanotubes (TNTs). Under UV/Vis light irradiation, the apparent first-order rate constant for the photocatalytic oxidation of As(III) to As(V) is 0.0148 min^-1. It seems that As(III) can be oxidized with photo-excited holes while the not-recombined electrons may be scavenged with O₂ in the channels of the well defined TNTs (an opening of 7 nm in diameter). In the absence of O₂, on the contrary, As(III) can be reduced to As(0), to some extent. Cu(II) (CuO), as an electron acceptor, was impregnated on the TNTs surfaces in order to gain a better understanding of electron transfer during photocatalysis. It appears that As(III) can be oxidized to As(V) while Cu(II) is reduced to Cu(I) and Cu(0). The molecular-scale data are very useful in revealing the oxidation states and interconversions of arsenic during the photocatalytic reactions. This work has implications in that the toxicity of arsenic in contaminated groundwater or wastewater can be effectively decreased via solar-driven photocatalysis, which may facilitate further treatments by coagulation.

Synthesis, Characterization and Visible-Light Photocatalytic Activity of Solid and TiO2-Supported Uranium Oxycompounds

In this study, various solid uranium oxycompounds and TiO₂-supported materials based on nanocrystalline anatase TiO₂ are synthesized using uranyl nitrate hexahydrate as a precursor. All uranium-contained samples are characterized using N₂ adsorption, XRD, UV–vis, Raman, TEM, XPS and tested in the oxidation of a volatile organic compound under visible light of the blue region to find correlations between their physicochemical characteristics and photocatalytic activity. Both uranium oxycompounds and TiO₂-supported materials are photocatalytically active and are able to completely oxidize gaseous organic compounds under visible light. If compared to the commercial visible-light TiO₂ KRONOS^® vlp 7000 photocatalyst used as a benchmark, solid uranium oxycompounds exhibit lower or comparable photocatalytic activity under blue light. At the same time, uranium compounds contained uranyl ion with a uranium charge state of 6+, exhibiting much higher activity than other compounds with a lower charge state of uranium. Immobilization of uranyl ions on the surface of nanocrystalline anatase TiO₂ allows for substantial increase in visible-light activity. The photonic efficiency of reaction over uranyl-grafted TiO₂, 12.2%, is 17 times higher than the efficiency for commercial vlp 7000 photocatalyst. Uranyl-grafted TiO₂ has the potential as a visible-light photocatalyst for special areas of application where there is no strict control for use of uranium compounds (e.g., in spaceships or submarines).

Metal Oxide-Based Photocatalytic Paper: A Green Alternative for Environmental Remediation

The interest in advanced photocatalytic technologies with metal oxide-based nanomaterials has been growing exponentially over the years due to their green and sustainable characteristics. Photocatalysis has been employed in several applications ranging from the degradation of pollutants to water splitting, CO2 and N2 reductions, and microorganism inactivation. However, to maintain its eco-friendly aspect, new solutions must be identified to ensure sustainability. One alternative is creating an enhanced photocatalytic paper by introducing cellulose-based materials to the process. Paper can participate as a substrate for the metal oxides, but it can also form composites or membranes, and it adds a valuable contribution as it is environmentally friendly, low-cost, flexible, recyclable, lightweight, and earth abundant. In term of photocatalysts, the use of metal oxides is widely spread, mostly since these materials display enhanced photocatalytic activities, allied to their chemical stability, non-toxicity, and earth abundance, despite being inexpensive and compatible with low-cost wet-chemical synthesis routes. This manuscript extensively reviews the recent developments of using photocatalytic papers with nanostructured metal oxides for environmental remediation. It focuses on titanium dioxide (TiO2) and zinc oxide (ZnO) in the form of nanostructures or thin films. It discusses the main characteristics of metal oxides and correlates them to their photocatalytic activity. The role of cellulose-based materials on the systems’ photocatalytic performance is extensively discussed, and the future perspective for photocatalytic papers is highlighted.

Low-cost nano-TiO2 composites for remediation of textile dyes: Appraisal on the effect of solar and ultraviolet irradiations

The study evaluates the azo dye degradation potential of nano-TiO₂ ; its composites with low-cost substrates in the form of powder and encapsulated bead for two widely used azo dyes, methyl orange (MO) and congo red (CR) under solar and ultraviolet (UV) irradiation. Degradation potential varied according to the dye concentration, chemistry of dye, light source, and the formulation of the photocatalyst. Both the dyes were completely decolorized at 100 mg/L concentration and to some extent at 1,000 mg/L concentration. The activated charcoal-titanium dioxide (AC-TiO₂ ) nanocomposite in the presence of solar radiations proved to be an economic and efficient substrate for degradation of the test dyes exhibiting combined action of adsorption and photocatalytic phenomena.

Study of Rh/TiO2–SiO2 system in photolytic water splitting

Titania silicates (TiO₂–SiO₂) of various compositions were prepared by a sol–gel method. RhCl₃ was used in 0.2 wt% of Rh quantity on the gel surfaces, which were subsequently exposed to UV irradiation in water under a 355-W UV lamp. λ > 370 nm. Both Rh [I] and Rh [III] surface complexes were formed, depending on the gels composition. They also exhibited various efficiency in photo water splitting reaction, the photocatalysts possessing as supports titania-silica gels containing 40 and 50 mol % of TiO₂, were the most effective. According to our proposal, the rhodium complexes took part in the oxidative addition and reductive elimination cycle, where two water molecules in photo water splitting reaction, yielding hydrogen – H₂ and two hydroxyl radicals. The two hydroxyls radicals, catalytically converted to oxygen atom and water, in the second cycle of the investigated water splitting reaction. Titanium octahedra and silicon tetrahedra linked by Ti–O–Si bridges were thought to be the grouping responsible for activity of the investigated catalysts. Their largest amounts are on the gels containing 40–58 mol % TiO_2.