Immobilization of recombinant heparinase I fused to cellulose-binding domain

A highly active heparinase I from Bacteroides cellulosilyticus: Cloning, high level expression, and molecular characterization

As one of the most extensively studied glycosaminoglycan lyases, heparinase I has been used in producing low or ultra-low molecular weight heparin. Its' important applications are to neutralize the heparin in human blood and analyze heparin structure in the clinic. However, the low productivity and activity of the enzyme have greatly hindered its applications. In this study, a novel Hep-I from Bacteroides cellulosilyticus (BcHep-I) was successfully cloned and heterologously expressed in E. coli BL21 (DE3) as a soluble protein. The molecular mass and isoelectric point (pI) of the enzyme are 44.42 kDa and 9.02, respectively. And the characterization of BcHep-I after purified with Ni-NTA affinity chromatography suggested that it is a mesophilic enzyme. BcHep-I can be activated by 1 mM Ca2+, Mg2+, and Mn2+, while severely inhibited by Zn2+, Co2+, and EDTA. The specific activity of the enzyme was 738.3 U·mg-1 which is the highest activity ever reported. The Km and Vmax were calculated as 0.17 mg·mL-1 and 740.58 U·mg-1, respectively. Besides, the half-life of 300 min at 30°C showed BcHep-I has practical applications. Homology modeling and substrate docking revealed that Gln15, Lys74, Arg76, Lys104, Arg149, Gln208, Tyr336, Tyr342, and Lys338 were mainly involved in the substrate binding of Hep-I, and 11 hydrogen bonds were formed between heparin and the enzyme. These results indicated that BcHep-I with high activity has great potential applications in the industrial production of heparin, especially in the clinic to neutralize heparin.

Cloning, expression, and characterization of a novel heparinase I from Bacteroides eggerthii

Heparinase I (Hep I) specifically degrades heparin to oligosaccharide or unsaturated disaccharide and has been widely used in preparation of low molecular weight heparin (LMWH). In this work, a novel Hep I from Bacteroides eggerthii VPI T5-42B-1 was cloned and overexpressed in Escherichia coli BL21 (DE3). The enzyme has specific activity of 480 IU·mg^-1 at the optimal temperature and pH of 30 °C and pH 7.5, and the K_m and V_max were 3.6 mg·mL^-1 and 647.93 U·mg^-1, respectively. The Hep I has good stability with t_1/2 values of 350 and 60 min at 30 and 37 °C, respectively. And it showed a residual relative activity of 70.8% after 21 days incubation at 4 °C. Substrate docking study revealed that Lys99, Arg101, Gln241, Lys270, Asn275, and Lys292 were mainly involved in the substrate binding of Hep I. The shorter hydrogen bonds formed between heparin and these residues suggested the higher specific activity of BeHep I. And the minimum conformational entropy value of 756 J·K^-1 provides an evidence for the improved stability of this enzyme. This Hep I could be of interest in the industrial preparation of LMWH for its high specific activity and good stability.

An engineered platform based on chitin-affinity immobilization for producing low molecular weight heparin

Using chitin-affinity interaction between triple-functional heparinase I (Hep I) and chitin, an engineered platform was prepared to produce controllable low molecular weight heparin (LMWH). Chitin microspheres with well-defined nanofibrils were fabricated through a "bottom up" pathway. An enhanced soluble protein, ChBD-SUMO-Hep I (CSH-I), was expressed in 3L batch fermentation with a high bioactivity of 2.5×10³ IU/L. Chitin binding domain (ChBD) can specifically bind to chitin in noncovalent way, which leads to the immobilization and purification of enzyme in a single step. The immobilized CSH-I was preferred over its free counterpart due to its higher tolerance to heat and pH, as well as improved shelf-life. The restraint enzyme could be reused up to 8 times to achieve a conversion yield exceeding 90%. By using the bioinspired conjugates, the qualified LMWH fractions were obtained by monitoring the degradation process with an absorbance range of 44.5-68.3 at 232nm.

Cellulosomes: bacterial nanomachines for dismantling plant polysaccharides

Cellulosomes are multienzyme complexes that are produced by anaerobic cellulolytic bacteria for the degradation of lignocellulosic biomass. They comprise a complex of scaffoldin, which is the structural subunit, and various enzymatic subunits. The intersubunit interactions in these multienzyme complexes are mediated by cohesin and dockerin modules. Cellulosome-producing bacteria have been isolated from a large variety of environments, which reflects their prevalence and the importance of this microbial enzymatic strategy. In a given species, cellulosomes exhibit intrinsic heterogeneity, and between species there is a broad diversity in the composition and configuration of cellulosomes. With the development of modern technologies, such as genomics and proteomics, the full protein content of cellulosomes and their expression levels can now be assessed and the regulatory mechanisms identified. Owing to their highly efficient organization and hydrolytic activity, cellulosomes hold immense potential for application in the degradation of biomass and are the focus of much effort to engineer an ideal microorganism for the conversion of lignocellulose to valuable products, such as biofuels.

Efficient enzymatic degradation process for hydrolysis activity of the Carrageenan from red algae in marine biomass

Carrageenan is a generic name for a family of polysaccharides obtained from certain species of red algae. New methods to produce useful cost-efficiently materials from red algae are needed to convert enzymatic processes into fermentable sugars. In this study, we constructed chimeric genes cCgkA and cCglA containing the catalytic domain of κ-carrageenase CgkA and λ-carrageenase CglA from Pseudoalteromonas carrageenovora fused with a dockerin domain. Recombinant strains expressing the chimeric carrageenase resulted in a halo formation on the carrageenan plate by alcian blue staining. The recombinant cCgkA and cCglA were assembled with scaffoldin miniCbpA via cohesin and dockerin interaction. Carbohydrate binding module (CBM) in scaffoldin was used as a tag for cellulose affinity purification using cellulose as a support. The hydrolysis process was monitored by the amount of reducing sugar released from carrageenan. Interestingly, these results indicated that miniCbpA, cCgkA and cCglA assembled into a complex and that the dockerin-fused enzymes on the scaffoldin had synergistic activity in the degradation of carrageenan. The observed enhancement of activity by carrageenolytic complex was 3.1-fold-higher compared with the corresponding enzymes alone. Thus, the assemblies of advancement of active enzyme complexes will facilitate the commercial production of useful products from red algae biomass which represents inexpensive and sustainable feed-stocks.

Rational design of a tripartite fusion protein of heparinase I enables one-step affinity purification and real-time activity detection

Enzymatic degradation of heparin has great potential as an ecological and specific way to produce low molecular weight heparin. However, the commercial use of heparinase I (HepA), one of the most important heparin lyases, has been hampered by low productivity and poor thermostability. Fusion with green fluorescent protein (GFP) or maltose-binding protein (MBP) has shown potential in facilitating the industrial use of HepA. Thus, tripartite fusion of GFP, MBP and HepA would be a promising approach. Therefore, in the present study, the tripartite fusion strategy was systematically studied, mainly focusing on the fusion order and the linker sequence, to obtain a fusion protein offering one-step purification and real-time detection of HepA activity by fluorescence as well as high HepA activity and thermostability. Our results show that fusion order is important for MBP binding affinity and HepA activity, while the linker sequences at domain junctions have significant effects on protein expression level, HepA activity and thermostability as well as GFP fluorescence. The best tripartite fusion was identified as MBP-(EAAAK)(3)-GFP-(GGGGS)(3)-HepA, which shows potential to facilitate the production of HepA and its application in industrial preparation of low molecular weight heparin.

Combination of site-directed mutagenesis and calcium ion addition for enhanced production of thermostable MBP-fused heparinase I in recombinant Escherichia coli

Heparinase I (HepI), which specifically cleaves heparin and heparan sulfate, is one of the most extensively studied glycosaminoglycan lyases. Low productivity of HepI has largely hindered its industrial and pharmaceutical applications. Loss of bacterial HepI enzyme activity through poor thermostability during its expression and purification process in production can be an important issue. In this study, using a thermostabilization strategy combining site-directed mutagenesis and calcium ion addition during its production markedly improved the yield of maltose-binding protein-fused HepI (MBP-HepI) from recombinant Escherichia coli. Substitution of Cys297 to serine in MBP-HepI offered a 30.6% increase in the recovered total enzyme activity due to a mutation-induced thermostabilizing effect. Furthermore, upon addition of Ca2+ as a stabilizer at optimized concentrations throughout its expression, extraction, and purification process, purified mutant MBP-HepI showed a specific activity of 56.3 IU/mg, 206% higher than that of the wild type obtained without Ca2+ addition, along with a 177% increase in the recovered total enzyme activity. The enzyme obtained through this novel approach also exhibited significantly enhanced thermostability, as indicated by both experimental data and the kinetic modeling. High-yield production of thermostable MBP-HepI using the present system will facilitate its applications in laboratory-scale heparin analysis as well as industrial-scale production of low molecular weight heparin as an improved anticoagulant substitute.

Enhanced soluble expression of recombinant Flavobacterium heparinum heparinase I in Escherichia coli by fusing it with various soluble partners

Heparinase I (HepA) was originally isolated from Flavobacterium heparinum (F. heparinum) and specifically cleaves heparin/heparan sulfate in a site-dependent manner, showing great promise for producing low molecular weight heparin (LMWH). However, expressing recombinant HepA is extremely difficult in Escherichia coli because it suffers from low yields, insufficient purity and insolubility. In this paper, we systematically cloned and fused the HepA gene to the C-terminus of five soluble partners, including translation initiation factor 2 domain I (IF2), glutathione S-transferase (GST), maltose-binding protein (MBP), small ubiquitin modifying protein (SUMO) and N-utilization substance A (NusA), to screen for their abilities to improve the solubility of recombinant HepA when expressed in E. coli. A convenient two-step immobilized metal affinity chromatography (IMAC) method was utilized to purify these fused HepA hybrids. We show that, except for NusA, the fusion partners dramatically improved the soluble expression of recombinant HepA, with IF2-HepA and SUMO-HepA creating almost completely soluble HepA (98% and 94% of expressed HepA fusions are soluble, respectively), which is the highest yield rate published to the best of our knowledge. Moreover, all of the fusion proteins show comparable biological activity to their unfused counterparts and could be used directly without removing the fusion tags. Together, our results provide a viable option to produce large amounts of soluble and active recombinant HepA for manufacturing.

Production of minicellulosomes for the enhanced hydrolysis of cellulosic substrates by recombinant Corynebacterium glutamicum

Although cellulosic materials of plant origin are the most abundant utilizable biomass resource, the amino acid-producing organism Corynebacterium glutamicum can not utilize these materials. Here we report the engineering of a C. glutamicum strain expressing functional minicellulosomes containing chimeric endoglucanase E bound to miniCbpA from Clostridium cellulovorans that can hydrolyze cellulosic materials. The chimeric endoglucanase E consists of the endoglucanase E catalytic backbone of Clostridium thermocellum fused with the endoglucanase B dockerin domain of C. cellulovorans. The resulting strain degraded cellulose efficiently by substrate targeting via the carbohydrate binding module. The assembly of minicellulosomes increased the activity against carboxymethyl cellulose approximately 2.8-fold compared with that for the corresponding enzymes alone. This is the first report of the formation of Clostridium minicellulosomes by C. glutamicum. The development of C. glutamicum strain that is capable of more effective cellulose hydrolysis brings about a realization of consolidated bioprocessing for the utilization of cellulosic biomass.

Multimeric hemicellulases facilitate biomass conversion

Two highly active trifunctional hemicellulases were constructed by linking the catalytic portion of a xylanase with an arabinofuranosidase and a xylosidase, using either flexible peptide linkers or linkers containing a cellulose-binding domain. The multifunctional enzymes retain the parental enzyme properties and exhibit synergistic effects in hydrolysis of natural xylans and corn stover.

Multiple display of catalytic modules on a protein scaffold: nano-fabrication of enzyme particles

Self assembly is a prerequisite for fabricating nanoscale structures. Here we present a new fusion protein based on the stress-responsive homo-oligomeric protein, SP1. This ring-shaped protein is a highly stable homododecamer, which can be potentially utilized to self-assemble different modules and enzymes in a predicted and oriented manner. For that purpose, a cohesin module (a component of the bacterial cellulosome) was selected, its gene fused in-frame to SP1, and the fusion protein was expressed in Escherichia coli. The cohesin module, specialized to incorporate different enzymes through specific recognition of a dockerin modular counterpart, is used to display new moieties on the SP1 scaffold. The SP1 scaffold displayed 12 active cohesin modules and specific binding to a dockerin-fused cellulase enzyme from Thermobifida fusca. Moreover, we found a significant increase in specific activity of the scaffold-displayed enzymes.

Preparation of novel immunomagnetic cellulose microspheres via cellulose binding domain-protein A linkage and its use for the isolation of interferon alpha-2b

We have developed a novel method for immobilizing antibodies onto magnetic cellulose microspheres (MCMS) using a cellulose binding domain-protein A (CBD-ProA) linkage. Biospecific connection between antibodies and MCMS exhibited significant advantages compared to chemical coupling, including convenient and simple preparation, elimination of toxic compounds, and highly efficient antibody utilization. To evaluate the application of this method, interferon alpha-2b (IFN alpha-2b) was chosen as a model target for detailed analysis of method parameters, such as protein adsorption, antibody efficiency, and reproducibility of the matrix. After optimization and characterization, IFN alpha-2b was successfully purified from crude cell lysate in a single step by cross-linked anti-IFN alpha-2b IgG protein A-CBD-MCMS, purifying 106.1 microg IFN alpha-2b/mL matrix, corresponding to a 13-fold increase over the chemical coupling method. Size-exclusion HPLC identified that the IFN alpha-2b isolated by this method had an overall purity of 95.5%, while immunological and biological assays showed an activity recovery of 91.9% and specific antiviral activity of 2.67 x 10(8)IU/mg. Overall, this study effectively illustrates the favorable qualities of this immobilization method with precisely defined properties that provide an attractive strategy for developing large-scale purification suitable for targeting compounds in highly complex samples.

Carbohydrate binding modules: biochemical properties and novel applications

Polysaccharide-degrading microorganisms express a repertoire of hydrolytic enzymes that act in synergy on plant cell wall and other natural polysaccharides to elicit the degradation of often-recalcitrant substrates. These enzymes, particularly those that hydrolyze cellulose and hemicellulose, have a complex molecular architecture comprising discrete modules which are normally joined by relatively unstructured linker sequences. This structure is typically comprised of a catalytic module and one or more carbohydrate binding modules (CBMs) that bind to the polysaccharide. CBMs, by bringing the biocatalyst into intimate and prolonged association with its substrate, allow and promote catalysis. Based on their properties, CBMs are grouped into 43 families that display substantial variation in substrate specificity, along with other properties that make them a gold mine for biotechnologists who seek natural molecular "Velcro" for diverse and unusual applications. In this article, we review recent progress in the field of CBMs and provide an up-to-date summary of the latest developments in CBM applications.

Chitin-binding domain based immobilization of d-hydantoinase

Chitin-binding domain (ChBD) of chitinase A1 from Bacillus circulans WL-12 comprises 45 amino acids and exhibits remarkably high specificity to chitin (Hashimoto, M., Ikegami, T., Seino, S., Ohuchi, N., Fukada, H., Sugiyama, J., Shirakawa, M., Watanabe, T., 2000. Expression and characterization of the chitin-binding domain of chintinase A1 from B. circulans WL-12. J. Bacteriol. 182, 3045-3054.). To investigate the feasibility of exploiting ChBD as affinity tags to confine enzymes of interest on chitin, ChBD fused to the C-terminus of the gene encoding D-hydantoinase was constructed. Subsequent expression of the hybrid protein in Escherichia coli gave a soluble fraction accounting for 8% of total cell protein content. Direct adsorption of the ChBD-fused D-hydantoinase on chitin beads was carried out, and SDS-PAGE analysis showed that the linkage between the fusion protein and the affinity matrix was highly specific, substantially stable, and reversible. As compared to its free counterpart, the immobilized D-hydantoinase exhibited higher tolerance to heat and gained a half life of 270 h at 45 degrees C. In addition, the shelf life (defined as 50% of initial activity remained) of the immobilized enzyme stored at 4 degrees C was found to reach 65 days. Furthermore, D-hydantoinase immobilized on chitin could be reused for 15 times to achieve the conversion yield exceeding 90%. Overall, it illustrates the great usefulness of ChBD for enzyme immobilization.

Column flow reactor using acetohydroxyacid synthase I fromEscherichia coli as catalyst in continuous synthesis ofR-phenylacetyl carbinol

We tested the possibility of utilizing acetohydroxyacid synthase I (AHAS I) from Escherichia coli in a continuous flow reactor for production of R-phenylacetyl carbinol (R-PAC). We constructed a fusion of the large, catalytic subunit of AHAS I with a cellulose binding domain (CBD). This allowed purification of the enzyme and its immobilization on cellulose in a single step. After immobilization, AHAS I is fully active and can be used as a catalyst in an R-PAC production unit, operating either in batch or continuous mode. We propose a simplified mechanistic model that can predict the product output of the AHAS I-catalyzed reaction. This model should be useful for optimization and scaling up of a R-PAC production unit, as demonstrated by a column flow reactor.

Production of autoproteolytically subunit-assembled 7-?-(4-carboxybutanamido)cephalosporanic acid (GL-7ACA) acylase from Pseudomonas sp. C427 using a chitin-binding domain

7-Beta-(4-Carboxybutanamido)cephalosporanic acid (GL-7ACA) acylase from Pseudomonas sp. C427 is known as a proteolytically processed bacterial enzyme. GL-7ACA acylase from Pseudomonas sp. C427 (C427) consists of alpha- and beta-subunits that are processed from a precursor peptide by removing the spacer peptide. A chitin-binding domain (CBD) of chitinase A1 derived from Bacillus circulans was genetically fused into four different positions of the C427-encoding gene. In the four enzymes thereby produced, Nalpha427, SP427, Calpha427, and Cbeta427, it was fused, respectively, to the N-terminal region of the alpha-subunit; the C-terminal region of the alpha-subunit; the three-amino-acid upper region of the C-terminal of the alpha-subunit; and to the C-terminal region of the beta-subunit. All of the fusion enzymes, expressed in Eschericha coli, were successfully processed into active forms and had GL-7ACA acylase activity. The affinity-binding activity to crystalline chitin was affected by the fusing position of CBD. Nalpha427, Calpha427, and Cbeta427 remained fused to the CBD after their processing steps and could bind to chitin, but in the case of SP427 the fused CBD was cleaved away during the processing steps and binding activity was no longer observed. These results indicate that CBD is functional in such autoproteolytically subunit-assembled acylases.

Engineering a bifunctional starch–cellulose cross-bridge protein

Biodegradable starch- and cellulose-based polymers have a range of properties which make them suitable for use in a wide array of biomedical applications ranging from bone replacement to engineering of tissue scaffolds and drug delivery systems. A novel polysaccharide cross-bridging protein was designed which was comprised of a cellulose-binding domain from Clostridium cellulovorans (CBD(clos)) and a starch-binding domain from Aspergillus niger B1 (SBD(Asp)). The two genes were fused in-frame via a synthetic elastin gene to construct a Cellulose/Starch Cross bridging Protein (CSCP). Recombinant CSCP was expressed in Escherichia coli, and successfully refolded from inclusion bodies. CSCP demonstrated cross-bridging ability in different model systems composed of insoluble or soluble starch and cellulose. The aspect that different carbohydrate-binding module maintain their binding capacity over a wide range of conditions, without the need for chemical reactions, makes them attractive domains for designing new classes of chimeric polysaccharide-binding domains which demonstrate potential for use in a wide range of biomaterials.

GIP, a Petunia hybrida GA-induced cysteine-rich protein: a possible role in shoot elongation and transition to flowering

The Petunia hybrida GA-induced proteins (GIPs) belong to a large group of proteins identified in numerous plant species. These proteins share a similar C-terminal region containing 12 cysteine residues in conserved positions. To date, the function of these proteins remains unclear. We previously found that GIP1 expression coincides with cell elongation in stems and flowers and is induced by gibberellic acid (GA3). Transient expression of a GIP1:green fluorescent protein (GFP) fusion in tobacco bright yellow 2 (BY2) cells and immunoblot analyses suggest microsomal compartmentalization with possible endoplasmic reticulum (ER) localization. However, the polyclonal anti-GIP1 antibodies also reacted with proteins extracted from the cell wall. Three novel GIP homologs, GIP2, GIP4, and GIP5, were isolated. While GIP4, similar to GIP1, is putatively localized to the ER membrane, the cleavable hydrophobic N-terminal sequences of GIP2 and GIP5 suggest cell wall localization. GIP1 and GIP2 are expressed during cell elongation, whereas GIP4 and GIP5 are expressed during cell division; nevertheless, they all were induced by GA3. We generated transgenic petunia in which we repressed the putative cell wall protein GIP2. The transgenic plants exhibited late flowering and reduced stem elongation. These phenotypic alterations were found under low, but not moderate-high temperatures, suggesting functional redundancy under normal growth conditions. The expression pattern and cellular localization of GIP2, its regulation by GA, and the phenotype of the transgenic plants suggest a role in GA-mediated cell elongation and transition to flowering.

Cellulose beads bound to cellulose binding domain-fused recombinant proteins; an adjuvant system for parenteral vaccination of fish

A recombinant form of the outer membrane protein (A-layer protein) associated with atypical Aeromonas salmonicida was expressed, fused to a cellulose binding domain (CBD) isolated from Clostridium cellulovorans. The resultant chimerical protein was bound to either Sigmacell 20((R)) or Orbicell cellulose particles. Common goldfish were injected intraperitoneally with the cellulose-protein complex and blood serum antibody levels produced against A-protein were examined weekly by means of ELISA. These titers were compared to those induced by immunization of goldfish with the same protein, with or without Freund's incomplete adjuvant, as well as to a standard bacterin-adjuvant system. Small Orbicell beads (1-10 microM) induced antibody levels that were equal to the titers produced by the adjuvanted protein and bacterin formulae. In comparison, the larger Sigmacell particles (10-20 microM) proved to be poor immunopotentiators. The long-term titer elicited from a single injection of A-protein bound to Orbicell beads was equivalent to that induced by two injections. All the vaccinated fish demonstrated memory to the A-layer protein after exposure to a pathogenic load of atypical A. salmonicida with Orbicell treated fish displaying the highest titer. No direct correlation was found between the presence of anti-A-protein antibodies and protection against infection. The paper describes a simple and safe method to increase the potential immunogenicity of soluble recombinant proteins by employing relatively inexpensive cellulose particles.

Oxidation of 4-bromophenol by the recombinant fused protein cellulose-binding domain-horseradish peroxidase immobilized on cellulose

A fused protein consisting of cellulose-binding domain (CBD) and horseradish peroxidase (HRP) was constructed and expressed in Escherichia coli. Refolded recombinant CBD-HRP (95% recovery yield) was bound to microcrystalline cellulose and applied for the oxidation of a model toxic phenol, 4-bromophenol (BP). Oxidation of BP by CBD-HRP resulted in the formation of dimers to pentamers as evidenced by mass spectrometry analysis. When immobilized, the vast majority of the oxidation products adsorbed to the cellulose matrix. CBD-HRP (0.75 pyrogallol units) bound to 0.1 g cellulose was packed in a column, connected to an HPLC pump and monitoring system, and column performance and capacity were studied under various operating conditions. When performance was studied as a function of BP loading rate at a constant H(2)O(2) loading rate of 1500 nmol/min, V(app) (max) and K(m) (app) were calculated to be 5.29 +/- 0.46 micromol mL min and 644.9 +/- 114.3 microM, respectively. Immobilized CBD-HRP exhibited enhanced stability to H(2)O(2) and oxidized considerably more BP than free CBD-HRP. Inclusion of gelatin, which suppresses product-dependent inactivation, further increased the amount of BP oxidation. These findings may have potential impact in terms of enzyme supply in high-rate treatment of wastewater contaminated with toxic phenols, since the susceptibility of peroxidases to both H(2)O(2) - and product-dependent inactivation demands continuous supply of fresh enzyme.

Cellulose-binding domains

Many researchers have acknowledged the fact that there exists an immense potential for the application of the cellulose-binding domains (CBDs) in the field of biotechnology. This becomes apparent when the phrase "cellulose-binding domain" is used as the key word for a computerized patent search; more then 150 hits are retrieved. Cellulose is an ideal matrix for large-scale affinity purification procedures. This chemically inert matrix has excellent physical properties as well as low affinity for nonspecific protein binding. It is available in a diverse range of forms and sizes, is pharmaceutically safe, and relatively inexpensive. Present studies into the application of CBDs in industry have established that they can be applied in the modification of physical and chemical properties of composite materials and the development of modified materials with improved properties. In agro-biotechnology, CBDs can be used to modify polysaccharide materials both in vivo and in vitro. The CBDs exert nonhydrolytic fiber disruption on cellulose-containing materials. The potential applications of "CBD technology" range from modulating the architecture of individual cells to the modification of an entire organism. Expressing these genes under specific promoters and using appropriate trafficking signals, can be used to alter the nutritional value and texture of agricultural crops and their final products.

Characterization of SP1, a stress-responsive, boiling-soluble, homo-oligomeric protein from aspen

sp1 cDNA was isolated from aspen (Populus tremula) plants by immunoscreening an expression library using polyclonal antibodies against BspA protein. BspA, which is a boiling-stable protein, accumulates in aspen plants in response to water stress and abscisic acid application (Pelah et al., 1995). The sp1 cDNA was found to encode a 12.4-kD generally hydrophilic protein with a hydrophobic C terminus, which is different from the BspA protein and was termed SP1 (stable protein 1). Northern-blot analysis revealed that sp1 encodes a small mRNA (about 0.6 kb) that is expressed in aspen plants under non-stress conditions and is accumulated after salt, cold, heat, and desiccation stress, and during the recovery from stress. The SP1 detected in plants remained soluble upon boiling, migrated both as a 12.4-kD band and a much higher mass of 116 kD on a 17% (w/v) Tricine-sodium dodecyl sulfate-polyacrylamide gel. Comparative protease digestion patterns, amino acid analyses, and the N-terminal sequences of the 12.4- and 116-kD proteins revealed that SP1 is homo-oligomeric. Furthermore, gel filtration chromatography analysis indicated that SP1 exists in aspen plants as a complex, composed of 12 subunits of 12.4 kD. A large number of sequences deduced from expressed sequence tags and genomic sequences of other organisms with unknown function show high homology to SP1. Thus, SP1 may represent a new protein family. Here, we present the first report on this putative protein family: the cloning, isolation, and characterization of SP1, a stress-responsive, boiling-soluble, oligomeric protein.

Modification of polysaccharides and plant cell wall by endo-1,4-beta-glucanase and cellulose-binding domains

Cellulose is one of the most abundant polymers in nature. Different living systems evolved simultaneously, using structurally similar proteins to synthesize and metabolize polysaccharides. In the growing plant, cell wall loosening, together with cellulose biosynthesis, enables turgor-driven cell expansion. It has been postulated that endo-1,4-beta-glucanases (EGases) play a central role in these complex activities. Similarly, microorganisms use a consortium of lytic enzymes to convert cellulose into soluble sugars. Most, if not all, cellulases have a modular structure with two or more separate independent functional domains. Binding to cellulose is mediated by a cellulose-binding domain (CBD), whereas the catalytic domain mediates hydrolysis. Today, EGases and CBDs are known to exist in a wide range of species and it is evident that both possess immense potential in modifying polysaccharide materials in-vivo and in-vitro. The hydrolytic function is utilized for polysaccharide degradation in microbial systems and cell wall biogenesis in plants. The CBDs exerts activity that can be utilized for effective degradation of crystalline cellulose, plant cell wall relaxation, expansion and cell wall biosynthesis. Applications range from modulating the architecture of individual cells to an entire organism. These genes, when expressed under specific promoters and appropriate trafficking signals can be used to alter the nutritional value and texture of agricultural crop and their final products. EGases and CBDs may also find applications in the modification of physical and chemical properties of composite materials to create new materials possessing improved properties.

Heavy metal removal by novel CBD-EC20 sorbents immobilized on cellulose

Heavy metals are major contributors to pollution of the biosphere, and their efficient removal from contaminated water is required. Biosorption is an emerging technology that has been shown to be effective in removing very low levels of heavy metal from wastewater. Although peptides such as metallothioneins or phytotchelatins are known to immobilize heavy metals, peptide-based biosorbents have not been extensively investigated. In this paper, we describe the construction and expression of bifunctional fusion proteins consisting of synthetic phytochelatin (EC20) linked to a Clostridium-derived cellulose-binding domain (CBD(clos)), enabling purification and immobilization of the fusions onto different cellulose materials in essentially a single step. The immobilized sorbents were shown to be highly effective in removing cadmium at parts per million levels. Repeated removal of cadmium was demonstrated in an immobilized column. The ability to genetically engineer biosorbents with precisely defined properties could provide an attractive strategy for developing high-affinity bioadsorbents suitable for heavy metal removal.

Specific adhesion to cellulose and hydrolysis of organophosphate nerve agents by a genetically engineered Escherichia coli strain with a surface-expressed cellulose-binding domain and organophosphorus hydrolase

A genetically engineered Escherichia coli cell expressing both organophosphorus hydrolase (OPH) and a cellulose-binding domain (CBD) on the cell surface was constructed, enabling the simultaneous hydrolysis of organophosphate nerve agents and immobilization via specific adsorption to cellulose. OPH was displayed on the cell surface by use of the truncated ice nucleation protein (INPNC) fusion system, while the CBD was surface anchored by the Lpp-OmpA fusion system. Production of both INPNC-OPH and Lpp-OmpA-CBD fusion proteins was verified by immunoblotting, and the surface localization of OPH and the CBD was confirmed by immunofluorescence microscopy. Whole-cell immobilization with the surface-anchored CBD was very specific, forming essentially a monolayer of cells on different supports, as shown by electron micrographs. Optimal levels of OPH activity and binding affinity to cellulose supports were achieved by investigating expression under different induction levels. Immobilized cells degraded paraoxon rapidly at an initial rate of 0.65 mM/min/g of cells (dry weight) and retained almost 100% efficiency over a period of 45 days. Owing to its superior degradation capacity and affinity to cellulose, this immobilized-cell system should be an attractive alternative for large-scale detoxification of organophosphate nerve agents.

Self-immobilizing recombinant antibody fragments for immunoaffinity chromatography: generic, parallel, and scalable protein purification

We present the directed immobilization of recombinant antibody fragments as ligands for general immunoaffinity chromatography methods. It is based on fusion proteins of scFv fragments with several chitin-binding domains which can be immobilized directly from a crude bacterial lysate on inexpensive chitin beads for the purification of proteins without any gradient or detector. It has been used with a positive pressure manifold, allowing the parallel processing of 24 different samples on a milligram scale, as convenient as plasmid isolation. The method is demonstrated with several anti-protein antibodies. In addition, methods are presented of using an anti-His tag antibody either alone or directly coupled to IMAC to obtain very pure protein. As those methods are scalable, they should prove very useful in the parallel purification of natural and recombinant proteins on small scales (for proteomics), medium scales (for crystallography and NMR), and very large scales (for therapeutic proteins).

Expression in Pichia pastoris of Candida antarctica lipase B and lipase B fused to a cellulose-binding domain

Candida antarctica lipase B (CALB) and C. antarctica lipase B fused to a cellulose-binding domain (CBD-CALB) were expressed functionally in the methylotrophic yeast Pichia pastoris. The cellulose-binding domain originates from cellulase A of the anaerobic rumen fungus Neocallimastix patriciarum. The genes were fused to the alpha-factor secretion signal sequence of Saccharomyces cerevisiae and placed under the control of the alcohol oxidase gene (AOX1) promoter. The recombinant proteins were secreted into the culture medium reaching levels of approximately 25 mg/L. The proteins were purified using hydrophobic interaction chromatography and gel filtration with an overall yield of 69%. Results from endoglycosidase H digestion of the proteins showed that CALB and CBD-CALB were N-glycosylated. The specific hydrolytic activities of recombinant CALB and CBD-CALB were identical to that reported for CALB isolated from its native source. The fusion of the CBD to the lipase resulted in a greatly enhanced binding toward cellulose for CBD-CALB compared with that for CALB.