Bioinspired Nanoparticulate Medical Glues for Minimally Invasive Tissue Repair

Underwater Adhesives from Redox-Responsive Polyplexes of Thiolated Polyamide Polyelectrolytes

We report the fabrication of optically clear underwater adhesives using polyplexes of oppositely charged partially-thiolated polyamide polyelectrolytes (TPEs). The thiol content of the constituent PEs was varied to assess its influence on the adhesive properties of the resulting glues. These catechol-free, redox-responsive TPE-adhesives were formulated in aquo and exhibited high optical transparency and strong adhesion even on submerged or moist surfaces of diverse polar substrates such as glass, aluminium, wood, and bone pieces. The adhesives could be cured under water through oxidative disulphide crosslinking of the constituent TPEs. The polyamide backbone provided multi-site H-bonding interactions with the substrates while the disulphide crosslinking provided the cohesive strength to the glue. Strong adhesion of mammalian bones (load bearing capacity upto 7 kg/cm2 ) was achieved using the adhesive containing 30 mol % thiol residues. Higher pH and use of oxidants such as povidone-iodine solution enhanced the curing rate of the adhesives, and so did the use of Tris buffer instead of Phosphate buffer. The porous architecture of the adhesive and its progressive degradation in aqueous medium over the course of three weeks bode well for diverse biomedical applications where temporary adhesion of tissues is required.

Injectable Antiswelling and High-Strength Bioactive Hydrogels with a Wet Adhesion and Rapid Gelling Process to Promote Sutureless Wound Closure and Scar-free Repair of Infectious Wounds

Developing injectable antiswelling and high-strength bioactive hydrogels with wet tissue adhesiveness and a rapid gelling process to meet the requirements for rapid hemostasis, sutureless wound closure, and scar-free repair of infected skin wounds continues to have ongoing challenges. Herein, injectable, antibacterial, and antioxidant hydrogel adhesives based on poly(citric acid-co-polyethylene glycol)-g-dopamine and amino-terminated Pluronic F127 (APF) micelles loaded with astragaloside IV (AS) are prepared. The H2O2/horseradish peroxidase (HRP) system is used to cause cross-linking of the hydrogel network through oxidative coupling between catechol groups and chemical cross-linking between the catechol group and the amino group. The hydrogels exhibit a rapid gelling process, high mechanical strength, an antiswelling effect, good antioxidant property, H2O2 release behavior, and degradability. In addition, the hydrogels present good wet tissue adhesiveness, high bursting pressure, excellent antibacterial activity, long-term sustained release of AS, and good biocompatibility. The hydrogels perform good hemostasis on mouse liver, rat liver, and rabbit femoral vein bleeding models and achieve much better closure and healing of skin incisions than biomedical glue and surgical sutures. Furthermore, the hydrogel dressing significantly improved the scar-free repair of MRSA-infected full thickness skin defect wounds by modulating inflammation, regulating the ratio of collagen I/III, and improving the vascularization and granulation tissue formation. Thus, AS-loaded hydrogels show huge potential as multifunctional dressings for in vivo hemostasis, sutureless wound closure, and scar-free repair of infected skin wounds.

Polymer nanomaterials for use as adjuvant surgical tools

Materials employed in the treatment of conditions encountered in surgical and clinical practice frequently face barriers in translation to application. Shortcomings can be generalized through their reduced mechanical stability, difficulty in handling, and inability to conform or adhere to complex tissue surfaces. To overcome an amalgam of challenges, research has sought the utilization of polymer-derived nanomaterials deposited in various fashions and formulations to improve the application and outcomes of surgical and clinical interventions. Clinically prevalent applications include topical wound dressings, tissue adhesives, surgical sealants, hemostats, and adhesion barriers, all of which have displayed the potential to act as superior alternatives to current materials used in surgical procedures. In this review, emphasis will be placed not only on applications, but also on various design strategies employed in fabrication. This review is designed to provide a broad and thought-provoking understanding of nanomaterials as adjuvant tools for the assisted treatment of pathologies prevalent in surgery. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanoscale Tools and Techniques in Surgery.

Hydrogel transformed from sandcastle-worm-inspired powder for adhering wet adipose surfaces

Normally, hydrogel adhesives do not perform well on adipose matters that are covered with bodily fluids. Besides, the maintenance of high extensibility and self-healing ability in fully swollen state still remains challenging. Based on these concerns, we reported a sandcastle-worm-inspired powder, which was made of tannic acid-functionalized cellulose nanofiber (TA-CNF), polyacrylic acid (PAA) and polyethyleneimine (PEI). The obtained powder can rapidly absorb diverse bodily fluids and transform into a hydrogel, displaying fast (＜3 s), self-strengthening and repeatable wet adhesion to adipose tissues. Due to the dense physically cross-linked network, the formed hydrogel still showed excellent extensibility (∼14 times) and self-healing ability after being immersed in water. Moreover, excellent hemostasis, antibacterial ability and biocompatibility make it suitable for numerous biomedical applications. With combined advantages of powders and hydrogels, such as good adaptability to irregular sites, efficient drug loading capacity and tissue affinity, the sandcastle-worm-inspired powder offers significant promise as tissue adhesive and repair materials. This work may open new avenues for designing high-performance bioadhesives with efficient and robust wet adhesiveness to adipose tissues.

Recent advances in biomimetic hemostatic materials

Although the past decade has witnessed unprecedented medical advances, achieving rapid and effective hemostasis remains challenging. Uncontrolled bleeding and wound infections continue to plague healthcare providers, increasing the risk of death. Various types of hemostatic materials are nowadays used during clinical practice but have many limitations, including poor biocompatibility, toxicity and biodegradability. Recently, there has been a burgeoning interest in organisms that stick to objects or produce sticky substances. Indeed, applying biological adhesion properties to hemostatic materials remains an interesting approach. This paper reviews the biological behavior, bionics, and mechanisms related to hemostasis. Furthermore, this paper covers the benefits, challenges and prospects of biomimetic hemostatic materials.

Protein-Based Biological Materials: Molecular Design and Artificial Production

Polymeric materials produced from fossil fuels have been intimately linked to the development of industrial activities in the 20th century and, consequently, to the transformation of our way of living. While this has brought many benefits, the fabrication and disposal of these materials is bringing enormous sustainable challenges. Thus, materials that are produced in a more sustainable fashion and whose degradation products are harmless to the environment are urgently needed. Natural biopolymers─which can compete with and sometimes surpass the performance of synthetic polymers─provide a great source of inspiration. They are made of natural chemicals, under benign environmental conditions, and their degradation products are harmless. Before these materials can be synthetically replicated, it is essential to elucidate their chemical design and biofabrication. For protein-based materials, this means obtaining the complete sequences of the proteinaceous building blocks, a task that historically took decades of research. Thus, we start this review with a historical perspective on early efforts to obtain the primary sequences of load-bearing proteins, followed by the latest developments in sequencing and proteomic technologies that have greatly accelerated sequencing of extracellular proteins. Next, four main classes of protein materials are presented, namely fibrous materials, bioelastomers exhibiting high reversible deformability, hard bulk materials, and biological adhesives. In each class, we focus on the design at the primary and secondary structure levels and discuss their interplays with the mechanical response. We finally discuss earlier and the latest research to artificially produce protein-based materials using biotechnology and synthetic biology, including current developments by start-up companies to scale-up the production of proteinaceous materials in an economically viable manner.

Mussel-Inspired Adhesive Hydrogels Based on Laponite-Confined Dopamine Polymerization as a Transdermal Patch

Transdermal patch for local drug delivery has attained huge attention as an attractive alternative to existing drug delivery techniques as it is painless and user-friendly. However, most adhesive hydrogels either do not have adequate adhesion with the skin or cause discomfort while being removed from the skin surface due to excessive adhesion. To address this challenge, we developed an adhesive hydrogel based on laponite-confined dopamine polymerization as a transdermal patch. Laponite RDS nanoclay was used to control the hydrogel's viscous behavior and dopamine polymerization. The laponite polymerized polydopamine (l-PDA) was incorporated into poly(vinyl alcohol) (PVA) to make the PVA-l-PDA hydrogel. The laponite-confined polymerization improved the hydrogels' water contact angle and adhesion strength. The adhesion strength of the PVA-l-PDA hydrogel was adequate to adhere to the evaluated goat skin, glass, and polypropylene surfaces. Notably, the PVA-l-PDA hydrogel was easy to peel off from the skin. Further, we evaluated the drug release profile in goat skin using lidocaine as a model drug. We observed the controlled release of lidocaine from the PVA-l-PDA hydrogel compared to the PVA-PDA hydrogel. In addition, the nanoclay-confined adhesive hydrogel did not show any cytotoxic effect in fibroblasts. Altogether, PVA-l-PDA hydrogels offer appropriate adhesive strength, toughness, and biocompatibility. Thus, the PVA-l-PDA hydrogel has the potential to be an efficient transdermal patch.

Co-delivery of an HIV prophylactic and contraceptive using PGSU as a long-acting multipurpose prevention technology

OBJECTIVES

Poly(glycerol sebacate) urethane (PGSU) elastomers formulated with 4'-ethynyl-2-fluoro-2'-deoxyadenosine (EFdA), levonorgestrel (LNG), or a combination thereof can function as multipurpose prevention technology implants for prophylaxis against HIV and unintended pregnancies. For these public health challenges, long-acting drug delivery technologies may improve patient experience and adherence. Traditional polymers encounter challenges delivering multiple drugs with dissimilar physiochemical properties. PGSU offers an alternative option that successfully delivers hydrophilic EFdA alongside hydrophobic LNG.

METHODS

This article presents the formulation, design, and characterization of PGSU implants, highlighting the impact of API loading, dimensions, and individual- versus combination-loading on release rates.

RESULTS

Co-delivery of hydrophilic EFdA alongside hydrophobic LNG acted as a porogen to accelerate LNG release. Increasing the surface area of LNG-only implants increased LNG release. All EFdA-LNG, EFdA-only, and LNG-only formulated implants demonstrated low burst release and linear release kinetics over 245 or 122 days studied to date.

CONCLUSION

PGSU co-delivers two APIs for HIV prevention and contraception at therapeutically relevant concentrations in vitro from a single bioresorbable, elastomeric implant. A new long-acting polymer technology, PGSU demonstrates linear-release kinetics, dual delivery of APIs with disparate physiochemical properties, and biocompatibility through long-term subcutaneous implantation. PGSU can potentially meet the demands of complex MPT or fixed-dose combination products, where better solutions can serve and empower patients.

High Performance Marine and Terrestrial Bioadhesives and the Biomedical Applications They Have Inspired

This study has reviewed the naturally occurring bioadhesives produced in marine and freshwater aqueous environments and in the mucinous exudates of some terrestrial animals which have remarkable properties providing adhesion under difficult environmental conditions. These bioadhesives have inspired the development of medical bioadhesives with impressive properties that provide an effective alternative to suturing surgical wounds improving closure and healing of wounds in technically demanding tissues such as the heart, lung and soft tissues like the brain and intestinal mucosa. The Gecko has developed a dry-adhesive system of exceptional performance and has inspired the development of new generation re-usable tapes applicable to many medical procedures. The silk of spider webs has been equally inspiring to structural engineers and materials scientists and has revealed innovative properties which have led to new generation technologies in photonics, phononics and micro-electronics in the development of wearable biosensors. Man made products designed to emulate the performance of these natural bioadhesive molecules are improving wound closure and healing of problematic lesions such as diabetic foot ulcers which are notoriously painful and have also found application in many other areas in biomedicine. Armed with information on the mechanistic properties of these impressive biomolecules major advances are expected in biomedicine, micro-electronics, photonics, materials science, artificial intelligence and robotics technology.

Bio-based and bio-inspired adhesives from animals and plants for biomedical applications

With the "many-headed" slime mold Physarum polycelphalum having been voted the unicellular organism of the year 2021 by the German Society of Protozoology, we are reminded that a large part of nature's huge variety of life forms is easily overlooked - both by the general public and researchers alike. Indeed, whereas several animals such as mussels or spiders have already inspired many scientists to create novel materials with glue-like properties, there is much more to discover in the flora and fauna. Here, we provide an overview of naturally occurring slimy substances with adhesive properties and categorize them in terms of the main chemical motifs that convey their stickiness, i.e., carbohydrate-, protein-, and glycoprotein-based biological glues. Furthermore, we highlight selected recent developments in the area of material design and functionalization that aim at making use of such biological compounds for novel applications in medicine - either by conjugating adhesive motifs found in nature to biological or synthetic macromolecules or by synthetically creating (multi-)functional materials, which combine adhesive properties with additional, problem-specific (and sometimes tunable) features.

A Review: Optimization for Poly(glycerol sebacate) and Fabrication Techniques for Its Centered Scaffolds

Poly(glycerol sebacate) (PGS), an emerging promising thermosetting polymer synthesized from sebacic acid and glycerol, has attracted considerable attention due to its elasticity, biocompatibility, and tunable biodegradation properties. But it also has some drawbacks such as harsh synthesis conditions, rapid degradation rates, and low stiffness. To overcome these challenges and optimize PGS performance, various modification methods and fabrication techniques for PGS-based scaffolds have been developed in recent years. Outlining the current modification approaches of PGS and summarizing the fabrication techniques for PGS-based scaffolds are of great importance to accelerate the development of new materials and enable them to be appropriately used in potential applications. Thus, this review comprehensively overviews PGS derivatives, PGS composites, PGS blends, processing for PGS-based scaffolds, and their related applications. It is envisioned that this review could instruct and inspire the design of the PGS-based materials and facilitate tissue engineering advances into clinical practice.

Tissue Adhesives: From Research to Clinical Translation

Sutures, staples, clips and skin closure strips are used as the gold standard to close wounds after an injury. In spite of being the present standard of care, the utilization of these conventional methods is precarious amid complicated and sensitive surgeries such as vascular anastomosis, ocular surgeries, nerve repair, or due to the high-risk components included. Tissue adhesives function as an interface to connect the surfaces of wound edges and prevent them from separation. They are fluid or semi-fluid mixtures that can be easily used to seal any wound of any morphology - uniform or irregular. As such, they provide alternatives to new and novel platforms for wound closure methods. In this review, we offer a background on the improvement of distinctive tissue adhesives focusing on the chemistry of some of these products that have been a commercial success from the clinical application perspective. This review is aimed to provide a guide toward innovation of tissue bioadhesive materials and their associated biomedical applications.

Uniting Drug and Delivery: Metal Oxide Hybrid Nanotherapeutics for Skin Wound Care

Wound care and soft tissue repair have been a major human concern for millennia. Despite considerable advancements in standards of living and medical abilities, difficult-to-heal wounds remain a major burden for patients, clinicians and the healthcare system alike. Due to an aging population, the rise in chronic diseases such as vascular disease and diabetes, and the increased incidence of antibiotic resistance, the problem is set to worsen. The global wound care market is constantly evolving and expanding, and has yielded a plethora of potential solutions to treat poorly healing wounds. In ancient times, before such a market existed, metals and their ions were frequently used in wound care. In combination with plant extracts, they were used to accelerate the healing of burns, cuts and combat wounds. With the rise of organic chemistry and small molecule drugs and ointments, researchers lost their interest in inorganic materials. Only recently, the advent of nano-engineering has given us a toolbox to develop inorganic materials on a length-scale that is relevant to wound healing processes. The robustness of synthesis, as well as the stability and versatility of inorganic nanotherapeutics gives them potential advantages over small molecule drugs. Both bottom-up and top-down approaches have yielded functional inorganic nanomaterials, some of which unite the wound healing properties of two or more materials. Furthermore, these nanomaterials do not only serve as the active agent, but also as the delivery vehicle, and sometimes as a scaffold. This review article provides an overview of inorganic hybrid nanotherapeutics with promising properties for the wound care field. These therapeutics include combinations of different metals, metal oxides and metal ions. Their production, mechanism of action and applicability will be discussed in comparison to conventional wound healing products.

Marine-Derived Polymeric Materials and Biomimetics: An Overview

The review covers recent literature on the ocean as both a source of biotechnological tools and as a source of bio-inspired materials. The emphasis is on marine biomacromolecules namely hyaluronic acid, chitin and chitosan, peptides, collagen, enzymes, polysaccharides from algae, and secondary metabolites like mycosporines. Their specific biological, physicochemical and structural properties together with relevant applications in biocomposite materials have been included. Additionally, it refers to the marine organisms as source of inspiration for the design and development of sustainable and functional (bio)materials. Marine biological functions that mimic reef fish mucus, marine adhesives and structural colouration are explained.

Marine invertebrates are a source of bioadhesives with biomimetic interest

Protein-based bioadhesives are found in diverse marine invertebrates that developed attachment devices to adhere to various substrates. These adhesives are of interest to materials science to create bioinspired-adhesives that can perform in water or wet conditions and can be applied in a broad variety of biotechnological and industrial fields. Due to the high variety of invertebrates that inhabit the marine environment, an enormous diversity of structures and principles used in biological adhesives remains unexplored and a very limited number of model systems have inspired novel biomimetic adhesives, the most notable being the mussel byssus adhesive. In this review we give an overview of other marine invertebrates studied for their bioadhesive properties in view of their interest for the development of new biomimetic adhesives for application in the biomedical field but also for antifouling coatings. The molecular features are described, highlighting relevant structures, and examples of biomimetic materials are discussed and explored, opening an avenue for a new set of medical products.

Marine-Inspired Polymers in Medical Adhesion

Medical adhesives that are strong, easy to apply and biocompatible are promising alternatives to sutures and staples in a large variety of surgical and clinical procedures. Despite progress in the development and regulatory approval of adhesives for use in the clinic, adhesion to wet tissue remains challenging. Marine organisms have evolved a diverse set of highly effective wet adhesive approaches that have inspired the design of new medical adhesives. Here we provide an overview of selected marine animals and their chemical and physical adhesion strategies, the state of clinical translation of adhesives inspired by these organisms, and target applications where marine-inspired adhesives can have a significant impact. We will focus on medical adhesive polymers inspired by mussels, sandcastle worms, and cephalopods, emphasize the history of bioinspired medical adhesives from the peer reviewed and patent literature, and explore future directions including overlooked sources of bioinspiration and materials that exploit multiple bioinspired strategies.

Engineering a naturally-derived adhesive and conductive cardiopatch

Myocardial infarction (MI) leads to a multi-phase reparative process at the site of damaged heart that ultimately results in the formation of non-conductive fibrous scar tissue. Despite the widespread use of electroconductive biomaterials to increase the physiological relevance of bioengineered cardiac tissues in vitro, there are still several limitations associated with engineering biocompatible scaffolds with appropriate mechanical properties and electroconductivity for cardiac tissue regeneration. Here, we introduce highly adhesive fibrous scaffolds engineered by electrospinning of gelatin methacryloyl (GelMA) followed by the conjugation of a choline-based bio-ionic liquid (Bio-IL) to develop conductive and adhesive cardiopatches. These GelMA/Bio-IL adhesive patches were optimized to exhibit mechanical and conductive properties similar to the native myocardium. Furthermore, the engineered patches strongly adhered to murine myocardium due to the formation of ionic bonding between the Bio-IL and native tissue, eliminating the need for suturing. Co-cultures of primary cardiomyocytes and cardiac fibroblasts grown on GelMA/Bio-IL patches exhibited comparatively better contractile profiles compared to pristine GelMA controls, as demonstrated by over-expression of the gap junction protein connexin 43. These cardiopatches could be used to provide mechanical support and restore electromechanical coupling at the site of MI to minimize cardiac remodeling and preserve normal cardiac function.

Gold Nanorod-Based Engineered Cardiac Patch for Suture-Free Engraftment by Near IR

Although cardiac patches hold a promise for repairing the infarcted heart, their integration with the myocardium by sutures may cause further damage to the diseased organ. To address this issue, we developed facile and safe, suture-free technology for the attachment of engineered tissues to organs. Here, nanocomposite scaffolds comprised of albumin electrospun fibers and gold nanorods (AuNRs) were developed. Cardiac cells were seeded within the scaffolds and assembled into a functioning patch. The engineered tissue was then positioned on the myocardium and irradiated with a near IR laser (808 nm). The AuNRs were able to absorb the light and convert it to thermal energy, which locally changed the molecular structure of the fibrous scaffold, and strongly, but safely, attached it to the wall of the heart. Such hybrid biomaterials can be used in the future to integrate any engineered tissue with any defected organs, while minimizing the risk of additional injury for the patient, caused by the conventional stitching methods.

ZnO nanoparticles as an antimicrobial tissue adhesive for skin wound closure

Tissue adhesives have emerged as alternatives to suturing and stapling in the treatment of reconnection of injured tissues. They can be accurately applied to the regions of body that are not easy to access in a minimally invasive way without a high level of training. Recently, it was demonstrated that nanoparticles can directly glue hydrogels or tissues without the need for in situ polymerization or crosslinking. For example, silica nanoparticles can serve as connectors between tissues and exhibit adhesion even in the presence of blood. This work reports the adhesive effect of two antimicrobial nanoparticles, i.e. titanium dioxide and zinc oxide nanoparticles, between hydrogels, hydrogel/polymer, and liver tissues. These two nanoparticles exhibit comparable or even better adhesive effects in comparison to silica nanoparticles. In a skin wound mouse model, zinc oxide nanoparticles achieve successful wound closure and aesthetic wound healing, suggesting their capability as an effective antimicrobial tissue adhesive.

Mimicking biological functionality with polymers for biomedical applications

The vast opportunities for biomaterials design and functionality enabled by mimicking nature continue to stretch the limits of imagination. As both biological understanding and engineering capabilities develop, more sophisticated biomedical materials can be synthesized that have multifaceted chemical, biological and physical characteristics designed to achieve specific therapeutic goals. Mimicry is being used in the design of polymers for biomedical applications that are required locally in tissues, systemically throughout the body, and at the interface with tissues.

Fluorescent Poly(glycerol-co-sebacate) Acrylate Nanoparticles for Stem Cell Labeling and Longitudinal Tracking

The stable presence of fluorophores within the biocompatible and biodegradable elastomer poly(glycerol-co-sebacate) acrylate (PGSA) is critical for monitoring the transplantation, performance, and degradation of the polymers in vivo. However, current methods such as physically entrapping the fluorophores in the polymer matrix or providing a fluorescent coating suffer from rapid leakage of fluorophores. Covalent conjugation of fluorophores with the polymers and the subsequent core-cross-linking are proposed here to address this challenge. Taking rhodamine as the model dye and PGSA nanoparticles (NPs) as the model platform, we successfully showed that the synthesized rhodamine-conjugated PGSA (PGSAR) NPs only released less than 30% rhodamine at day 28, whereas complete release of dye occurred for rhodamine-encapsulated PGSA (PGSA-p-R) NPs at day 7 and 57.49% rhodamine was released out for the un-cross-linked PGSAR NPs at day 28. More excitingly, PGSAR NPs showed a strong quantum yield enhancement (26.24-fold) of the fluorophores, which was due to the hydrophobic environment within PGSAR NPs and the restricted rotation of (6-diethylamino-3H-xanthen-3-ylidene) diethyl group in rhodamine after the conjugation and core-cross-linking. The stable presence of dye in the NPs and enhanced fluorescence allowed a longitudinal tracking of stem cells both in vitro and in vivo for at least 28 days.

The role of coacervation and phase transitions in the sandcastle worm adhesive system

Sandcastle worms, Phragmatopoma californica (Fewkes), live along the western coast of North America. Individual worms build tubular shells under seawater by gluing together sandgrains and biomineral particles with a multipart, rapid-set, self-initiating adhesive. The glue comprises distinct sets of condensed, oppositely charged polyelectrolytic components-polyphosphates, polysulfates, and polyamines-that are separately granulated and stored at high concentration in distinct cell types. The pre-organized adhesive modules are secreted separately and intact, but rapidly fuse with minimal mixing and expand into a crack-penetrating complex fluid. Within 30s of secretion into seawater, the fluid adhesive transitions (sets) into a porous solid adhesive joint. The nano- and microporous structure of the foamy solid adhesive contributes to the strength and toughness of the adhesive joint through several mechanisms. A curing agent (catechol oxidase), co-packaged into both types of adhesive granules, covalently cross-links the adhesive and becomes a structural component of the final adhesive joint. The overall effectiveness of the granulated sandcastle glue is more a product of the cellular sorting and packaging mechanisms, the transition from fluid to solid following secretion, and its final biphasic porous structure as it is of its composition or any particular amino acid modification.