Porous graphene materials for advanced electrochemical energy storage and conversion devices

NR, Rangappa D, Sinha D. Scalable one-pot synthesis of aminated reduced graphene oxide for high-performance supercapacitor electrodes

Functionalizing graphene by adding amine groups can significantly enhance its wettability and overall properties. However, traditional methods for introducing -NH2 typically require lengthy processing times, high temperatures, and pressures, which limit their suitability for large-scale production. This work presents the fastest method reported to date for synthesizing aminated reduced graphene oxide (NH2-rGO) under moderate temperatures, completing the entire process in just ∼9 h. The nitrogen content of the NH2-rGO is tunable from 2 to 6% and the material also exhibits excellent electrochemical properties. A symmetric supercapacitor based on the prepared material demonstrated a specific capacitance of 322 F g-1 at 1 A g-1, which is a 5-fold increase compared to rGO. It also delivered an impressive volumetric energy density of 48.16 Wh L-1, which is nearly seven times higher than rGO (6.89 Wh L-1). Further, NH2-rGO could also be utilized in biosensing, photovoltaics, catalysis, and as a base for further chemical modifications.

Surface S-Doped Nanostructured RuO2 and Its Anion Passivating Effect for Efficient Overall Seawater Splitting

Electrolysis of seawater for hydrogen (H2) production to harvest clean energy is an appealing approach. In this context, there is an urgent need for catalysts with high activity and durability. RuO2 electrocatalysts have shown efficient activity in the hydrogen and oxygen evolution reactions (HER and OER), but they still suffer from poor stability. Herein, surface S-doped nanostructured RuO2 (S-RuO2) is rationally fabricated for efficient overall seawater splitting. Doping with S enhances the activity (overpotentials of 25 mV for the HER and 243 mV for the OER), long-term durability (1000 h at 100 mA cm-2), and achieves nearly 100% Faraday efficiency (FE). Moreover, the S-RuO2-based anion exchange membrane seawater electrolyzer requires 2.01 V to reach 1.0 A cm-2 under demanding industrial conditions. Experimental analysis and theoretical calculations indicate that surface S introduction could lower the valence state of Ru, thereby conferring enhanced activity and stability. Furthermore, the nanostructured S-RuO2 electrocatalyst is highly protected by the S-doped surface, which repels Cl- in alkaline seawater. This investigation presents a feasible strategy for designing RuO2-based seawater splitting catalysts with both high performance and good resistance to anodic corrosion.

On-Surface Synthesis of Two-Dimensional Carbon-Based Networks via Hierarchical Ullmann Coupling Reactions

The recent developed bottom-up on-surface synthesis offers unprecedent opportunities for the fabrication of two-dimensional (2D) carbon-based networks with atomic precision. Hierarchical coupling approach has been proposed as an efficient strategy for improving the corresponding reaction selectivity and quality of target structures. Herein, we report the synthesis of a nitrogen-doped carbon-based network on Ag(100) utilizing a hierarchical Ullmann coupling strategy. The accurate identification of reaction intermediates and products by scanning tunneling microscopy allows us to unravel the reaction mechanism. The synthetic process of 2D carbon-based networks is kinetics-driven, relying on the competition between dechlorination and C-C coupling. We expect that our discussion on the mechanism of hierarchical coupling may shed light on the rational design and precise synthesis of 2D carbon-based networks on surfaces.

Mesoporous Carbon Composites Containing Carbon Nanostructures: Recent Advances in Synthesis and Applications in Electrochemistry

Carbon nanostructures (CNs) are various low-dimensional allotropes of carbon that have attracted much scientific attention due to their interesting physicochemical properties. It was quickly discovered that the properties of CNs can be significantly improved by modifying their surface or synthesizing composites containing CNs. Composites combine two or more materials to create a final material with enhanced properties compared with their initial components. In this review, we focused on one group of carbon materials-composites containing CNs (carbon/CN composites), characterized by high mesoporosity. Particular attention was paid to the type of synthesis used, divided into hard- and soft-templating methods, the type of polymer matrix precursors and their preparation method, heteroatom doping, pore formation methods, and correlations between the applied experimental conditions of synthesis and the structural properties of the composite materials obtained. In the last part, we present an updated summary of the applications of mesoporous composites in energy storage systems, supercapacitors, electrocatalysis, etc. The correlations among porous structures of materials, heteroatom doping, and electrochemical or catalytic efficiency, including activity, selectivity, and stability, were also emphasized. To our knowledge, a single review has never summarized pyrolyzed mesoporous composites of polymer-CNs, their properties and applications in electrochemistry.

Lignin-Based Carbon Nanomaterials for Biochemical Sensing Applications

Lignin-based carbon nanomaterials offer several advantages, including biodegradability, biocompatibility, high specific surface area, ease of functionalization, low toxicity, and cost-effectiveness. These materials show promise in biochemical sensing applications, particularly in the detection of metal ions, organic compounds, and human biosignals. Various methods can be employed to synthesize carbon nanomaterials with different dimensions ranging from 0D-3D, resulting in diverse structures and physicochemical properties. This study provides an overview of the preparation techniques and characteristics of multidimensional (0-3D) lignin-based carbon nanomaterials, such as carbon dots (CDs), carbon nanotubes (CNTs), graphene, and carbon aerogels (CAs). Additionally, the sensing capabilities of these materials are compared and summarized, followed by a discussion on the potential challenges and future prospects in sensor development.

Mesoporous Nitrogen-Doped Holey Reduced Graphene Oxide: Preparation, Purification, and Application for Metal-Free Electrochemical Sensing of Dopamine

Holey graphenic nanomaterials with porosity within the basal plane attract significant interest. It is observed that the perforation of graphene can enhance the specific surface area of the nanosheet, ensuring effective wetting and penetration of electrolytes to the electrode surface, facilitating rapid charge transfer, and boosting the electrocatalytic efficacy of the transducers. This study reports the first example of nitrogen-doped holey reduced graphene oxide with a mesoporous morphology of the graphene basal plane (N-MHG). It is shown that N-MHG can be synthesized through a one-step hydrothermal treatment of GO using NH3 and H2O2. A straightforward procedure for the purification of N-MHG has also been developed. AFM, TEM, and Raman analyses have revealed that N-MHG possesses a highly mesoporous network structure with a pore size ranging from 10 to 50 nm. X-ray photoelectron spectroscopy data have indicated a partial reduction of the graphene oxide sheets during the etching process but also show a 3-5 times higher content of C═O and O-C═O fragments compared to rGO. This could account for the remarkable stability of the N-MHG aqueous suspension. An electrochemical sensor for dopamine analysis is assembled on a glassy carbon electrode with N-MHG/Nafion membrane and characterized by cyclic voltammetry and electrochemical impedance spectroscopy.

Conducting Polymer-Based Gel Materials: Synthesis, Morphology, Thermal Properties, and Applications in Supercapacitors

Despite the numerous ongoing research studies in the area of conducting polymer-based electrode materials for supercapacitors, the implementation has been inadequate for commercialization. Further understanding is required for the design and synthesis of suitable materials like conducting polymer-based gels as electrode materials for supercapacitor applications. Among the polymers, conductive polymer gels (CPGs) have generated great curiosity for their use as supercapacitors, owing to their attractive qualities like integrated 3D porous nanostructures, softness features, very good conductivity, greater pseudo capacitance, and environmental friendliness. In this review, we describe the current progress on the synthesis of CPGs for supercapacitor applications along with their morphological behaviors and thermal properties. We clearly explain the synthesis approaches and related phenomena, including electrochemical approaches for supercapacitors, especially their potential applications as supercapacitors based on these materials. Focus is also given to the recent advances of CPG-based electrodes for supercapacitors, and the electrochemical performances of CP-based promising composites with CNT, graphene oxides, and metal oxides is discussed. This review may provide an extensive reference for forthcoming insights into CPG-based supercapacitors for large-scale applications.

Recent progress in on-surface synthesis of nanoporous graphene materials

Nanoporous graphene (NPG) materials are generated by removing internal degree-3 vertices from graphene and introducing nanopores with specific topological structures, which have been widely explored and exploited for applications in electronic devices, membranes, and energy storage. The inherent properties of NPGs, such as the band structures, field effect mobilities and topological properties, are crucially determined by the geometric structure of nanopores. On-surface synthesis is an emerging strategy to fabricate low-dimensional carbon nanostructures with atomic precision. In this review, we introduce the progress of on-surface synthesis of atomically precise NPGs, and classify NPGs from the aspects of element types, topological structures, pore shapes, and synthesis strategies. We aim to provide a comprehensive overview of the recent advancements, promoting interdisciplinary collaboration to further advance the synthesis and applications of NPGs.

Sustainable design of high-performance multifunctional carbon electrodes by one-step laser carbonization for supercapacitors and dopamine sensors

Laser carbonization is a rapid method to produce functional carbon materials for electronic devices, but many typical carbon precursors are not sustainable and/or require extensive processing for electrochemical applications. Here, a sustainable concept to fabricate laser patterned carbon (LP-C) electrodes from biomass-derived sodium lignosulfonate, an abundant waste product from the paper industry is presented. By introducing an adhesive polymer interlayer between the sodium lignosulfonate and a graphite foil current collector, stable, abrasion-resistant LP-C electrodes can be fabricated in a single laser irradiation step. The electrode properties can be systematically tuned by controlling the laser processing parameters. The optimized LP-C electrodes demonstrate a promising performance in supercapacitors and electrochemical dopamine biosensors. They exhibit high areal capacitances of 38.9 mF cm-2 in 1 M H2SO4 and high energy and power densities of 4.3 μW h cm-2 and 16 mW cm-2 in 17 M NaClO4, showing the best performance among biomass-derived LP-C materials reported so far. After 20 000 charge/discharge cycles, they retain a high capacitance of 81%. Dopamine was linearly detected in the range of 0.1 to 20 μM with an extrapolated limit of detection of 0.5 μM (S/N = 3) and high sensitivity (13.38 μA μM-1 cm-2), demonstrating better performance than previously reported biomass-derived LP-C dopamine sensors.

Binder-Free Three-Dimensional Porous Graphene Cathodes via Self-Assembly for High-Capacity Lithium-Oxygen Batteries

The porous architectures of oxygen cathodes are highly desired for high-capacity lithium-oxygen batteries (LOBs) to support cathodic catalysts and provide accommodation for discharge products. However, controllable porosity is still a challenge for laminated cathodes with cathode materials and binders, since polymer binders usually shield the active sites of catalysts and block the pores of cathodes. In addition, polymer binders such as poly(vinylidene fluoride) (PVDF) are not stable under the nucleophilic attack of intermediate product superoxide radicals in the oxygen electrochemical environment. The parasitic reactions and blocking effect of binders deteriorate and then quickly shut down the operation of LOBs. Herein, the present work proposes a binder-free three-dimensional (3D) porous graphene (PG) cathode for LOBs, which is prepared by the self-assembly and the chemical reduction of GO with triblock copolymer soft templates (Pluronic F127). The interconnected mesoporous architecture of resultant 3D PG cathodes achieved an ultrahigh capacity of 10,300 mAh g-1 for LOBs. Further, the cathodic catalysts ruthenium (Ru) and manganese dioxide (MnO2) were, respectively, loaded onto the inner surface of PG cathodes to lower the polarization and enhance the cycling performance of LOBs. This work provides an effective way to fabricate free-standing 3D porous oxygen cathodes for high-performance LOBs.

The effect of water on gold supported chiral graphene nanoribbons: rupture of conjugation by an alternating hydrogenation pattern

In the last few years we have observed a breakpoint in the development of graphene-derived technologies, such as liquid phase filtering and their application to electronics. In most of these cases, they imply exposure of the material to solvents and ambient moisture, either in the fabrication of the material or the final device. The present study demonstrates the sensitivity of graphene nanoribbon (GNR) zigzag edges to water, even in extremely low concentrations. We have addressed the unique reactivity of (3,1)-chiral GNR with moisture on Au(111). Water shows a reductive behaviour, hydrogenating the central carbon of the zigzag segments. By combining scanning tunnelling microscopy (STM) with simulations, we demonstrate how their reactivity reaches a thermodynamic limit when half of the unit cells are reduced, resulting in an alternating pattern of hydrogenated and pristine unit cells starting from the terminal segments. Once a quasi-perfect alternation is reached, the reaction stops regardless of the water concentration. The hydrogenated segments limit the electronic conjugation of the GNR, but the reduction can be reversed both by tip manipulation and annealing. Selective tip-induced dehydrogenation allowed the stabilization of radical states at the edges of the ribbons, while the annealing of the sample completely recovered the original, pristine GNR.

A Universal Cross-Synthetic Strategy for Sub-10 nm Metal-Based Composites with Excellent Ion Storage Kinetics

The sub-10 nm metal-based nanomaterials (SMNs) show great potential for the electrochemical energy storage field. However, their ion storage capacity and stability suffer from severe agglomeration and interface problems. Herein, a universal strategy is reported to synthesize a wide range of SMNs (e.g., metal, nitride, oxide, and sulfides) embedded in free-standing carbon foam (SMN/FC-F) composite electrodes by crossing the interfacial confinement of NaCl self-assembly with the thermal-mechanical coupling of powder metallurgy. The pressure-enhanced NaCl self-assembly interfacial confinement is greatly beneficial to preventing SMN agglomeration and promoting SMNs embedded in FC-F which originate from the welding of carbon nanosheets. They are confirmed via a series of advanced characterizations including X-ray photoelectron spectroscopy, and spherical aberration-corrected scanning transmission electron microscopy, with theoretical computations. Benefiting from the unique structure, SMNs/FC-F delivers ultrafast and stable ion-storage kinetics. As a proof-of-concept demonstration, the MoS2 /FC-F shows excellent ion storage kinetics and superior long-term cycling performance for ion storage (e.g., Na3 V2 (PO4 )2 O2 F/C//MoS2 /FC-F sodium-ion batteries exhibit a high reversible capacity of 185 mAh g-1 at 0.5 A g-1 with a decay rate of 0.05% per cycle.). This work provides a new opportunity to design and fabricate promising SMN-based free-standing working electrodes for electrochemical energy storage and conversion applications.

A Dithiin-Linked Covalent Organic Polymer for Ultrahigh Capacity Half-Cell and Symmetric Full-Cell Sodium-Ion Batteries

Sodium ion-batteries (SIBs) are considered as a class of promising alternatives to lithium-ion batteries (LIBs) to overcome their drawbacks of limited sources and safety problems. However, the lack of high-performance electrode materials hinders the wide-range commercialization of SIBs. Comparing to inorganic counterparts, organic electrode materials, which are benefitted from flexibly designable structures, low cost, environmental friendliness, and high theoretical gravimetric capacities, should be a prior choice. Here, a covalent organic polymer (COP) based material (denoted as CityU-9) is designed and synthesized by integrating multiple redox motifs (benzoquinone and thioether), improved conductivity (sulfur induction), and intrinsic insolubility (rigid skeleton). The half-cell SIBs exhibit ultrahigh specific capacity of 1009 mAh g-1 and nearly no capacity drop after 650 cycles. The first all-COP symmetric full-cell shows high specific capacity of 90 mAh g-1 and excellent rate capability. This work can extend the selection of redox-active moieties and provide a rational design strategy of high-performance novel organic electrode materials.

Aqueous Organic Batteries Using the Proton as a Charge Carrier

Benefiting from the merits of low cost, nonflammability, and high operational safety, aqueous rechargeable batteries have emerged as promising candidates for large-scale energy-storage applications. Among various metal-ion/non-metallic charge carriers, the proton (H+ ) as a charge carrier possesses numerous unique properties such as fast proton diffusion dynamics, a low molar mass, and a small hydrated ion radius, which endow aqueous proton batteries (APBs) with a salient rate capability, a long-term life span, and an excellent low-temperature electrochemical performance. In addition, redox-active organic molecules, with the advantages of structural diversity, rich proton-storage sites, and abundant resources, are considered attractive electrode materials for APBs. However, the charge-storage and transport mechanisms of organic electrodes in APBs are still in their infancy. Therefore, finding suitable electrode materials and uncovering the H+ -storage mechanisms are significant for the application of organic materials in APBs. Herein, the latest research progress on organic materials, such as small molecules and polymers for APBs, is reviewed. Furthermore, a comprehensive summary and evaluation of APBs employing organic electrodes as anode and/or cathode is provided, especially regarding their low-temperature and high-power performances, along with systematic discussions for guiding the rational design and the construction of APBs based on organic electrodes.

Side-Chain-Dependent Functional Intercalations in Graphene Oxide Membranes for Selective Water and Ion Transport

Subnanometer interlayer space in graphene oxide (GO) laminates is desirable for use as permselective membrane nanochannels. Although the facile modification of the local structure of GO enables various nanochannel functionalizations, precisely controlling nanochannel space is still a challenge, and the roles of confined nanochannel chemistry in selective water/ion separation have not been clearly defined. In this study, macrocyclic molecules with consistent basal plane but varying side groups were used to conjunct with GO for modified nanochannels in laminates. We demonstrated the side-group dependence of both the angstrom-precision tunability for channel free space and the energy barrier setting for ion transport, which challenges the permeability-selectivity trade-off with a slightly decreased permeance from 1.1 to 0.9 L m^-2 h^-1 bar^-1 but an increased salt rejection from 85% to 95%. This study provides insights into the functional-group-dependent intercalation modifications of GO laminates for understanding laminate structural control and nanochannel design.

Carbon microspheres built of La2O3 quantum dots-implanted nanorods: Superb hosts with ultra-long Li2Sn-catalysis durability

Practical utilization of Li-sulfur batteries (LSBs) is still hindered by the sulfur cathode side due to its inferior electrical conductivity, huge volume expansion and adverse polysulfide shuttling effects. Though using polar catalysts coupled with mesoporous carbons may well surmount these barriers, such unsheltered catalysts rarely survive due to oversaturated polysulfide adsorption and extra sulfuration side reactions. To overcome above constrains, we herein propose to implant highly reactive nanocatalysts into carbon matrix with few nanometers insertion depth for mechanical protection. As a paradigm study, we have embedded La₂O₃-quantum dots (QDs) into carbon nanorods, which are then assembled into carbon microspheres (CMs). As evaluated, La₂O₃ QDs-CMs can help elevate the cathode redox reaction kinetics and sulfur utilization ratios, delivering a large capacity of 1392 mAh g^-1 at 0.25C and high-capacity retention of 76% after total cycling. The thin carbon layers on La₂O₃ QDs exert a key role in impeding excess polysulfide accumulation on catalysts and thus prevent their deactivation/failure. Our strategy may guide a smart way to make catalysts-involved sulfur cathode systems with ultra-long working durability for LSBs applications.

Buchwald-Hartwig coupled conjugated microporous polymer for efficient removal COVID-19 antiviral drug famciclovir from waters: Adsorption behavior and mechanism

The consumption of famciclovir (FCV) has been increased dramatically since the outbreak of coronavirus in 2019, and the pollution and harm of FCV in waters are concerned. Here, by utilizing aryl halides on 2, 4, 6-tris(4-bromophenyl)- 1, 3, 5-triazine (BPT) and primary amine groups on benzidine (BZ), a novel conjugated microporous polymer, namely BPT-BZ-CMP, was synthesized by Buchwald-Hartwig coupling reaction and applied in the removal of FCV from aqueous solution firstly. The synthesized BPT-BZ-CMP were characterized by various methods, including FTIR, SEM, BET, and Zeta-potential. Due to the micropore structure and high specific surface area, it took only 30 min for BPT-BZ-CMP to adsorb FCV to reach an equilibrium, and the maximum adsorption capacity was 347.8 mg·g^-1. The Liu and pseudo-second-order kinetic models properly fit the adsorption equilibrium and kinetic data, respectively. The adsorption process was a spontaneous process, and the hydrogen bonding, π-π interaction and C-H···π interaction enhanced the adsorption of FCV on BPT-BZ-CMP. BPT-BZ-CMP maintained a good adsorption capacity after four consecutive adsorption-desorption cycle experiments. This study confirmed the potential of BPT-BZ-CMP as efficient sorbent to remove FCV from aqueous solutions.

Graphene Incorporated Electrospun Nanofiber for Electrochemical Sensing and Biomedical Applications: A Critical Review

The extraordinary material graphene arrived in the fields of engineering and science to instigate a material revolution in 2004. Graphene has promptly risen as the super star due to its outstanding properties. Graphene is an allotrope of carbon and is made up of sp²-bonded carbon atoms placed in a two-dimensional honeycomb lattice. Graphite consists of stacked layers of graphene. Due to the distinctive structural features as well as excellent physico-chemical and electrical conductivity, graphene allows remarkable improvement in the performance of electrospun nanofibers (NFs), which results in the enhancement of promising applications in NF-based sensor and biomedical technologies. Electrospinning is an easy, economical, and versatile technology depending on electrostatic repulsion between the surface charges to generate fibers from the extensive list of polymeric and ceramic materials with diameters down to a few nanometers. NFs have emerged as important and attractive platform with outstanding properties for biosensing and biomedical applications, because of their excellent functional features, that include high porosity, high surface area to volume ratio, high catalytic and charge transfer, much better electrical conductivity, controllable nanofiber mat configuration, biocompatibility, and bioresorbability. The inclusion of graphene nanomaterials (GNMs) into NFs is highly desirable. Pre-processing techniques and post-processing techniques to incorporate GNMs into electrospun polymer NFs are precisely discussed. The accomplishment and the utilization of NFs containing GNMs in the electrochemical biosensing pathway for the detection of a broad range biological analytes are discussed. Graphene oxide (GO) has great importance and potential in the biomedical field and can imitate the composition of the extracellular matrix. The oxygen-rich GO is hydrophilic in nature and easily disperses in water, and assists in cell growth, drug delivery, and antimicrobial properties of electrospun nanofiber matrices. NFs containing GO for tissue engineering, drug and gene delivery, wound healing applications, and medical equipment are discussed. NFs containing GO have importance in biomedical applications, which include engineered cardiac patches, instrument coatings, and triboelectric nanogenerators (TENGs) for motion sensing applications. This review deals with graphene-based nanomaterials (GNMs) such as GO incorporated electrospun polymeric NFs for biosensing and biomedical applications, that can bridge the gap between the laboratory facility and industry.

Synthetic carbon nanomaterials for electrochemical energy conversion

Carbon nanomaterials have attracted widespread attention in electrochemical energy conversion due to their large surface area, excellent electrical/thermal conductivity and good chemical stability. However, the structure-activity relationship of carbon nanomaterials remains unclear. This review is thus on the synthesis methods of carbon nanomaterials including two-dimensional graphene, graphene nanoribbons, nanographene, heteroatom doped porous carbon and graphdiyne as electrocatalysts for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction in fuel cells, electrolyzers and CO₂ reduction. The correlation between the electronic/chemical properties and electrochemical performance of synthetic carbon nanostructures will be profoundly discussed. Additionally, the emerging challenges and some perspectives on the development of synthetic carbon nanomaterials for electrochemical energy conversion are discussed.

High Pressure Rapid Synthesis of LiCrTiO4 with Oxygen Vacancy for High Rate Lithium-Ion Battery Anodes

Lithium-ion battery based on LiCrTiO₄ (LCTO) is considered to be a promising anode material, as they provide higher safety and durability beyond than that of graphite electrode. However, the applications of this transformative technology demand improved inherent electrical conductivity of LCTO as well as a simple and rapid synthetic route. Here, LCTO with oxygen vacancies (OVs) is fabricated using high-pressure synthesis technology in only 40 min. The optimal synthesis pressure is 0.8 GPa (LCTO-0.8). The reversible capacity of LCTO-0.8 at 1C is 131 mA h g^-1 after 1000 cycles and the capacity retention is nearly 97%, and the reversible capacity of LCTO synthesized at atmospheric pressure (LCTO-P) is 85 mA h g^-1 under the same circumstances. Even at 5C, the reversible capacity is 110 mA h g^-1 , which is 77% higher than LCTO-P. Furthermore, it is confirmed by theoretical calculations that the introduction of OVs has the occupation of electronic states at the Fermi level, which greatly enhances the intrinsic conductivity of LCTO. Specifically, the electronic conductivity has increased by two orders of magnitude compared with LCTO-P. Therefore, high-pressure synthesis technology endows LCTO with superior characteristics, providing a new avenue for industrialization.

Insight into Reversible Conversion Reactions in SnO2 -Based Anodes for Lithium Storage: A Review

Various anode materials have been widely studied to pursue higher performance for next generation lithium ion batteries (LIBs). Metal oxides hold the promise for high energy density of LIBs through conversion reactions. Among these, tin dioxide (SnO₂ ) has been typically investigated after the reversible lithium storage of tin-based oxides is reported by Idota and co-workers in 1997. Numerous in/ex situ studies suggest that SnO₂ stores Li⁺ through a conversion reaction and an alloying reaction. The difficulty of reversible conversion between Li₂ O and SnO₂ is a great obstacle limiting the utilization of SnO₂ with high theoretical capacity of 1494 mA h g^-1 . Thus, enhancing the reversibility of the conversion reaction has become the research emphasis in recent years. Here, taking SnO₂ as a typical representative, the recent progress is summarized and insight into the reverse conversion reaction is elaborated. Promoting Li₂ O decomposition and maintaining high Sn/Li₂ O interface density are two effective approaches, which also provide implications for designing other metal oxide anodes. In addition, some in/ex situ characterizations focusing on the conversion reaction are emphatically introduced. This review, from the viewpoint of material design and advanced characterizations, aims to provide a comprehensive understanding and shed light on the development of reversible metal oxide electrodes.

Cellulose Nanocrystals (CNC)-Based Functional Materials for Supercapacitor Applications

The growth of industrialization and the population has increased the usage of fossil fuels, resulting in the emission of large amounts of CO_2. This serious environmental issue can be abated by using sustainable and environmentally friendly materials with promising novel and superior performance as an alternative to petroleum-based plastics. Emerging nanomaterials derived from abundant natural resources have received considerable attention as candidates to replace petroleum-based synthetic polymers. As renewable materials from biomass, cellulose nanocrystals (CNCs) nanomaterials exhibit unique physicochemical properties, low cost, biocompatibility and biodegradability. Among a plethora of applications, CNCs have become proven nanomaterials for energy applications encompassing energy storage devices and supercapacitors. This review highlights the recent research contribution on novel CNC-conductive materials and CNCs-based nanocomposites, focusing on their synthesis, surface functionalization and potential applications as supercapacitors (SCs). The synthesis of CNCs encompasses various pretreatment steps including acid hydrolysis, mechanical exfoliation and enzymatic and combination processes from renewable carbon sources. For the widespread applications of CNCs, their derivatives such as carboxylated CNCs, aldehyde-CNCs, hydride-CNCs and sulfonated CNC-based materials are more pertinent. The potential applications of CNCs-conductive hybrid composites as SCs, critical technical issues and the future feasibility of this endeavor are highlighted. Discussion is also extended to the transformation of renewable and low-attractive CNCs to conductive nanocomposites using green approaches. This review also addresses the key scientific achievements and industrial uses of nanoscale materials and composites for energy conversion and storage applications.

Lateral layered semiconductor multijunctions for novel electronic devices

Layered semiconductors, represented by transition metal dichalcogenides, have attached extensive attention due to their unique and tunable electrical and optical properties. In particular, lateral layered semiconductor multijunctions, including homojunctions, heterojunctions, hybrid junctions and superlattices, present a totally new degree of freedom in research on electronic devices beyond traditional materials and their structures, providing unique opportunities for the development of new structures and operation principle-based high performance devices. However, the advances in this field are limited by the precise synthesis of high-quality junctions and greatly hampered by ambiguous device performance limits. Herein, we review the recent key breakthroughs in the design, synthesis, electronic structure and property modulation of lateral semiconductor multijunctions and focus on their application-specific devices. Specifically, the synthesis methods based on different principles, such as chemical and external source-induced methods, are introduced stepwise for the controllable fabrication of semiconductor multijunctions as the basics of device application. Subsequently, their structure and property modulation are discussed, including control of their electronic structure, exciton dynamics and optical properties before the fabrication of lateral layered semiconductor multijunction devices. Precise property control will potentially result in outstanding device performances, including high-quality diodes and FETs, scalable logic and analog circuits, highly efficient optoelectronic devices, and unique electrochemical devices. Lastly, we focus on several of the most essential but unresolved debates in this field, such as the true advantages of few-layer vs. monolayer multijunctions, how sharp the interface should be for specific functional devices, and the superiority of lateral multijunctions over vertical multijunctions, highlighting the next-phase strategy to enhance the performance potential of lateral multijunction devices.

3D Continuously Porous Graphene for Energy Applications

Constructing bulk graphene materials with well-reserved 2D properties is essential for device and engineering applications of atomically thick graphene. In this article, the recent progress in the fabrications and applications of sterically continuous porous graphene with designable microstructures, chemistries, and properties for energy storage and conversion are reviewed. Both template-based and template-free methods have been developed to synthesize the 3D continuously porous graphene, which typically has the microstructure reminiscent of pseudo-periodic minimal surfaces. The 3D graphene can well preserve the properties of 2D graphene of being highly conductive, surface abundant, and mechanically robust, together with unique 2D electronic behaviors. Additionally, the bicontinuous porosity and large curvature offer new functionalities, such as rapid mass transport, ample open space, mechanical flexibility, and tunable electric/thermal conductivity. Particularly, the 3D curvature provides a new degree of freedom for tailoring the catalysis and transport properties of graphene. The 3D graphene with those extraordinary properties has shown great promises for a wide range of applications, especially for energy conversion and storage. This article overviews the recent advances made in addressing the challenges of developing 3D continuously porous graphene, the benefits and opportunities of the new materials for energy-related applications, and the remaining challenges that warrant future study.

Recent progress in the development of porous carbon-based electrodes for sensing applications

Electrochemical (bio)sensors are considered clean and powerful analytical tools capable of converting an electrochemical reaction between analytes and electrodes into a quantitative signal. They are an important part of our daily lives integrated in various fields such as healthcare, food and environmental monitoring. Several strategies including the incorporation of porous carbon materials in its configuration have been applied to improve their sensitivity and selectivity in the last decade. The porosity, surface area, graphitic structure as well as chemical composition of materials greatly influence the electrochemical performance of the sensors. In this review, activated carbons, ordered mesoporous carbons, graphene-based materials, and MOF-derived carbons, which are used to date as crucial elements of electrochemical devices, are described, starting from their textural and chemical compositions to their role in the outcome of electrochemical sensors. Several relevant and meaningful examples about material synthesis, sensor fabrication and applications are illustrated and described. The closer perspectives of these fascinating materials forecast a promising future for the electrochemical sensing field.

Rationally tuning ratio of micro- to meso-pores of biomass-derived ultrathin carbon sheets toward supercapacitors with high energy and high power density

The carbon pore structure could have a significant effect on supercapacitor performance; however, this effect has not yet been systematically studied. A facile approach for synthesizing porous, ultrathin carbon sheets while rationally tuning the ratio of micro-to meso-pores via partial corrosion has been developed for the fabrication of high-performance devices. The prepared carbon from biomass with an optimal ratio of micro- to meso-pores has a large specific surface area of 1785 m² g ^-1, a high specific capacitance of 447F g ^-1 at 0.5 A g^-1, a high energy density of 15.5-9.7 Wh kg^-1, and an excellent power density of 0.062-6.24 kW kg^-1. After 10,000 charge-discharge cycles, the capacitance retention was maintained at 95%, which exceeded most of the biomass-carbon-based capacitors. Volcano relationships were found to exist through plots of both specific surface area and specific capacitance versus the micro-to meso-pore ratio. An enhancement mechanism with a rational pore structure is proposed, which not only networks micropores to remove died-end micropores to achieve the largest specific active surface area and high specific capacitance but also realizes fast mass-transport channels, resulting in high power density. This work provides an effective approach based on waste re-use by tuning a rational pore structure for achieving high energy/power density toward green energy applications with universal significance.

β-Cyclodextrin-functionalized graphene and metal–organic framework composites for ultrasensitive electrochemical detection of chloramphenicol

Novel β-CD@functionalized graphene /Cu-BTC composites were in situ prepared using β-CD functionalized graphene and Cu-BTC, and a new electrochemical sensor for sensitive detection of chloramphenicol was developed based on the composites.

Continuously Reinforced Carbon Nanotube Film Sea-Cucumber-like Polyaniline Nanocomposites for Flexible Self-Supporting Energy-Storage Electrode Materials

The charge storage mechanism and capacity of supercapacitors completely depend on the electrochemical and mechanical properties of electrode materials. Herein, continuously reinforced carbon nanotube film (CNTF), as the flexible support layer and the conductive skeleton, was prepared via the floating catalytic chemical vapor deposition (FCCVD) method. Furthermore, a series of novel flexible self-supporting CNTF/polyaniline (PANI) nanocomposite electrode materials were prepared by cyclic voltammetry electrochemical polymerization (CVEP), with aniline and mixed-acid-treated CNTF film. By controlling the different polymerization cycles, it was found that the growth model, morphology, apparent color, and loading amount of the PANI on the CNTF surface were different. The CNTF/PANI-15C composite electrode, prepared by 15 cycles of electrochemical polymerization, has a unique surface, with a "sea-cucumber-like" 3D nanoprotrusion structure and microporous channels formed via the stacking of the PANI nanowires. A CNTF/PANI-15C flexible electrode exhibited the highest specific capacitance, 903.6 F/g, and the highest energy density, 45.2 Wh/kg, at the current density of 1 A/g and the voltage window of 0 to 0.6 V. It could maintain 73.9% of the initial value at a high current density of 10 A/g. The excellent electrochemical cycle and structural stabilities were confirmed on the condition of the higher capacitance retention of 95.1% after 2000 cycles of galvanostatic charge/discharge, and on the almost unchanged electrochemical performances after 500 cycles of bending. The tensile strength of the composite electrode was 124.5 MPa, and the elongation at break was 18.9%.

Digital-intellectual design of microporous organic polymers

Microporous organic polymers (MOPs) are a new class of microporous materials. Due to their high porosity, large pore volume, and large surface area, MOPs exhibit excellent performance in gas adsorption and storage, membrane separation, ion capture, heterogeneous catalysis, light energy conversion and storage, capacitance, and other fields. However, selecting high-performance materials for specific applications from thousands of candidate MOPs is a key problem. Traditional design strategies for new materials with targeted properties, including trial-and-error and relying on the experiences of domain experts, are time- and cost-consuming. With the rapid development of computation technology and theoretical chemistry, the discovery of new materials is no longer a purely experimental subject. Breaking away from the traditional trial-and-error strategy for materials discovery, materials design is emerging and gaining increasing attention. In addition, the ability to collect "big data" has greatly improved and has further stimulated the development of new methods for materials design and discovery. In this perspective, we examine how data-driven techniques combine artificial intelligence (AI) and human expertise, playing a significant role in the design of MOPs. Such analytics can significantly reduce time-to-insight and accelerate the cost-effective materials discovery, which is the goal for designing future MOPs.

A Nanoporous Graphene/Nitrocellulose Membrane Beneficial to Wound Healing

Adequate treatment of skin wounds is vital to health. Nitrocellulose bandage as a traditional wound dressing is widely used for wound healing, but its limited air permeability and poor sterilization need to be improved for enhancing the actual efficacy. Here, nanoporous graphene (NPG) is used to mix into nitrocellulose for preparing a composite membrane, which exhibits a moderate transmission rate of water vapor, excellent toughness performance, and good biocompatibility. Moreover, the membrane shows an excellent broad-spectrum antibacterial property (>98%, Escherichia coli; >90%, Staphylococcus aureus) and can reduce the risk of microbial infection for the body after trauma. Importantly, after using the nanoporous graphene/nitrocellulose membrane, the wound closure percentage reaches 93.03 ± 1.08% at 7 days after the trauma, and the degree of skin tissue recovery is also improved significantly. Therefore, this study develops a highly efficient wound healing dressing, which is expected to be used directly in clinics.

Progress in modifications of 3D graphene-based adsorbents for environmental applications

3D graphene-based materials are promising adsorbents for environmental applications. Furthermore, increasing attention has been paid to the improvement of 3D graphene adsorbents for removing pollutants. In this article, the progress in the modification of 3D graphene materials and their performance for removing pollutants were reviewed. The modification strategies, which were classified as (1) the activation with CO₂ (steam and other oxidants) and (2) the surface functionalization with polymers (metals, and metal oxides), were evaluated. The performances of modified 3D graphene materials were assessed for the removal of waste gases (such as CO₂), refractory organics, and heavy metals. The challenges and future research directions were discussed for the environmental applications of 3D graphene materials.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Emergent electrochemical functions and future opportunities of hierarchically constructed metal-organic frameworks and covalent organic frameworks

Designing spatial and architectural features across from the molecular to bulk scale is one of the most important topics in materials science which has received a lot of attention in recent years. Looking back to the past research, findings on the influences of spatial features denoted as porous structures on the applications related to mass transport phenomena have been widely studied in traditional inorganic materials, such as ceramics over the past two decades. However, due to the difficulties in precise control of the porous structures at the molecular level in this class of materials, the mechanistic understanding of the effects of spatial and architectural features across from the molecular level to meso-/macroscopic scale is still lacking, especially in electrochemical reactions. Further understanding of fundamental electrochemical functions in well-defined architectures is indispensable for the further advancement of key next-generation energy devices. Furthermore, creating periodic porosity in reticular structures is starting to be recognized as an emerging approach to control the electronic structure of materials. In this review, we focus on the investigations on preparing well-defined molecular-level crystalline porous materials known as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) into hierarchically constructed architectures from molecular structures lower than the reticular frameworks to meso-/macroscopic scale structures. By connecting well-defined nanosized porous structures in MOFs/COFs and additional length-scale space or shapes, emergent electrochemical functions towards emerging devices, such as beyond Li-ion batteries including all-solid-state rechargeable batteries, are expected to be obtained. By summarizing recent advancements in synthetic strategies of hierarchically constructed MOF/COF based materials and fundamental investigation of their structural effect in a wide spectrum of electrochemical applications, we highlight the importance and future direction of this developing field of hierarchically constructed MOFs/COFs, while emphasizing the required chemical stability of the MOFs/COFs which meet the use in the game-changing electrochemical devices.

Computational Study of Graphene-Polypyrrole Composite Electrical Conductivity

In this study, the electrical properties of graphene–polypyrrole (graphene-PPy) nanocomposites were thoroughly investigated. A numerical model, based on the Simmons and McCullough equations, in conjunction with the Monte Carlo simulation approach, was developed and used to analyze the effects of the thickness of the PPy, aspect ratio diameter of graphene nanorods, and graphene intrinsic conductivity on the transport of electrons in graphene–PPy–graphene regions. The tunneling resistance is a critical factor determining the transport of electrons in composite devices. The junction capacitance of the composite was predicted. A composite with a large insulation thickness led to a poor electrochemical electrode. The dependence of the electrical conductivity of the composite on the volume fraction of the filler was studied. The results of the developed model are consistent with the percolation theory and measurement results reported in literature. The formulations presented in this study can be used for optimization, prediction, and design of polymer composite electrical properties.

Template-Directing Coupled with Chemical Activation Methodology-Derived Hexagon-like Porous Carbon Electrode with Outstanding Compatibility to Electrolytes and Low-Temperature Performance

The conversion of asphalt into hexagon-like porous carbon (HPC) with a micro-mesoporous structure is realized by the coupling of template-directing and chemical activation methodologies. The specific surface area of HPC can reach up to 1356 m² g^-1 even at such a low-proportioned dosage of activator (0.5-fold) and is also larger than those of template-directed carbon and activation-derived carbon, as it benefited from the coupling merits of template-directing and chemical activation. Excellent capacitive-energy-storage behavior with respect to rate capability, capacitance retention, and durability are delivered by HPC//HPC symmetric supercapacitors assembled with aqueous and organic electrolytes. This great compatibility for different kinds of electrolytes and electrode properties is owed to the robust hexagon-like microarchitecture feature associated with hierarchical pore structure, which not only hinders the stacking between each other but also provides a buffer function for the volume variation and sufficient active sites for the storage of electrolyte ions. The drastic temperature variation has almost no influence on the diffusion and transfer rate of electrolyte ions, further evidencing the advanced feature of the hierarchical pore structure. Additionally, HPC//Li₄Ti₅O₁₂ LIC assembled with the Li-based electrolyte also presents a superior Ragone performance. The coexistence of micro- and mesopores for the HPC makes it an attractive electrode material for various capacitive-energy-storage devices. This work provides a promising way to realize the plasticity of pore channels and mass production of high capacitive storage ability of electrode material via the combination of template-directing and chemical activation strategies.

Mo2 C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂ C/reduced graphene oxide (Mo₂ C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂ C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂ C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m^-2 , which was considerably higher than that of CP-MFC (926.8±6.3 mW m^-2 ). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria-electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).

Carbon materials for ion-intercalation involved rechargeable battery technologies

The development of carbon electrode materials for rechargeable batteries is reviewed from the perspective of structural features, electrochemistry, and devices.