Bio-Inspired Bright Structurally Colored Colloidal Amorphous Array Enhanced by Controlling Thickness and Black Background

Proposal of a Modular Classification System for Direct Dental Resin Composites Based on Clinical Applications

The adhesive-resin composite pair has been the cornerstone of direct restorations in dentistry for many years. Resin composites are traditionally classified in three ways based on their inorganic structure, their organic composition and their viscosity. While these classifications have long been associated with the optical, mechanical, and clinical properties of resin composites, recent studies indicate that this classification is not always valid. In recent years, a significant expansion of the range of clinical resin composite families has occurred, each with varying degrees of validation through in vitro and clinical studies. As a result, new resin composites with distinct structures, viscosities, and clinical indications have emerged. Despite this progress, a formal classification of the clinical features of all resin composites is still lacking, leading to terminological inconsistencies in research and potential confusion among clinicians. This brief review, supported by an exhaustive search of the dental literature, proposes a new clinical classification system for resin composites based on their key clinical features to help clinicians and researchers easily identify the key clinical characteristics of formulations. This modular classification, encompassing eight main families and 14 characteristics, is particularly suited to future developments, as current trends aim to simplify procedures by integrating multiple formulations into single products.

Flexible Inverse Opal Structural Color Films with High Strength and Harsh Environment Stability

Flexible photonic crystals (PCs) constructed by PCs and special polymers are very promising to achieve a combination of vivid structural colors, mechanical robustness, and environment stability. However, PCs that incorporate polymer binders are still susceptible to destruction and subsequent loss of structural color when subjected to significant external forces or harsh environments. Besides, because most of these polymers are highly flammable, crucial fire safety is difficult to be guaranteed in the application of these materials. In this study, we report a poly(m-phenyleneisophthalamide) inverse opal (PMIA IO) structural color film through a SiO2 PC template sacrificing method. Benefiting from the high rigid PMIA molecular structural configuration, the PMIA IO films are able to maintain their structural colors even in harsh conditions, such as large tensile stress, high and low temperatures, potent acids and bases, and ultraviolet radiation. More attractively, the PMIA IO films demonstrate excellent flame retardancy, with the limiting oxygen index (LOI) and flame retardant rating reaching 28 vol % and V0, respectively. We believe that the flexible structural color films with high strength, harsh environment stability, and flame retardancy, which are difficult for other structural color materials to possess simultaneously, have great potential for special applications in fire protection, national defense, aviation, marine, and aerospace fields.

Flexible self-supporting photonic crystals: Fabrications and responsive structural colors

Photonic crystals (PCs) play an increasingly significant role in anti-counterfeiting, sensors, displays, and other fields due to their tunable structural colors produced by light manipulation of photonic stop bands. Flexible self-supporting photonic crystals (FSPCs) eliminate the requirement for conventional structures to rely on the existence of hard substrates, as well as the problem of poor mechanical qualities caused by the stiffness of the building blocks. Meanwhile, diverse production techniques and materials provide FSPCs with varied stimulus-responsive color-changing capacities, thus they have received an abundance of focus. This review summarizes the preparation strategies and variable structural colors of FSPCs. First, a series of preparation strategies by integrating polymers with PCs are summarized, including assembly of colloidal spheres on flexible substrates, polymer packaging, polymer-based direct assembly, nanoimprinting, and 3D printing. Subsequently, variable structural colors of FSPCs with different stimulations, such as viewing angle, chemical stimulation (solvents, ions, pH, biomolecules, etc.), temperature, mechanical/magnetic stress, and light, are described in detail. Finally, the outlook and challenges regarding FSPCs are presented, and several potential directions for their fabrication and application are discussed. It's believed that FSPCs will be a valuable platform for advancing the practical implementation of optical metamaterials.

3D Printing Photonic Crystals: A Review

Living organisms in nature possess diverse and vibrant structural colors generated from their intrinsic surface micro/nanostructures. These intricate micro/nanostructures can be harnessed to develop a new generation of colorful materials for various fields such as photonics, information storage, display, and sensing. Recent advancements in the fabrication of photonic crystals have enabled the preparation of structurally colored materials with customized geometries using 3D printing technologies. Here, a comprehensive review of the historical development of fabrication methods for photonic crystals is provided. Diverse 3D printing approaches along with the underlying mechanisms, as well as the regulation methods adopted to generate photonic crystals with structural color, are discussed. This review aims to offer the readers an overview of the state-of-the-art 3D printing techniques for photonic crystals, present a guide and considerations to fabricate photonic crystals leveraging different 3D printing methods.

Spontaneous Photonic Jammed Packing of Core-Shell Colloids in Conductive Aqueous Inks for Non-Iridescent Structural Coloration

Integrating structural colors and conductivity into aqueous inks has the potential to revolutionize wearable electronics, providing flexibility, sustainability, and artistic appeal to electronic components. This study aims to introduce bioinspired color engineering to conductive aqueous inks. Our self-assembly approach involves mixing poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with sulfonic acid-modified polystyrene (sPS) colloids to generate non-iridescent structural colors in the inks. This spontaneous structural coloration occurs because PEDOT:PSS and sPS colloids can self-assemble into core-shell structures and reversibly cluster into photonic aggregates of maximally random jammed packing within the aqueous environment, as demonstrated by small-angle X-ray scattering. Dissipative particle dynamics simulation confirms that the self-assembly aggregation of PEDOT:PSS chains and sPS colloids can be manipulated by the polymer-colloid interactions. Utilizing the finite-difference time-domain method, we demonstrate that the photonic aggregates of the core-shell colloids achieve close to maximum jammed packing, making them suitable for producing vivid structural colors. These versatile conductive inks offer adjustable color saturation and conductivity, with conductivity levels reaching 36 S cm-1 through the addition of polyethylene glycol oligomer, while enhanced water resistance and mechanical stability are achieved by doping with a cross-linker, poly(ethylene glycol) diglycidyl ether. With these unique features, the inks can create flexible, patterned circuits through processes like coating, writing, and dyeing on large areas, providing eco-friendly, visually appealing colors for customizable, stylish, comfortable, and wearable electronic devices.

Influence of Sodium Ions and Carbon Black on the Formation and Structural Color of Photonic Balls by Silica Particles

In this study, photonic balls─spherical aggregates of submicrometer-sized silica particles with uniform particle size─were investigated as structural colored materials. The structural color of these photonic balls is influenced by the ordered arrangement of the silica particles. The research focused on how the addition of electrolytes, specifically NaCl, affects the formation of photonic balls to achieve the desired structural color. Without NaCl, the photonic balls formed onion-shaped colloidal crystals. At NaCl concentrations above 0.006 mol/L, the particles aggregated into short-range ordered structures. When the concentration exceeded 0.05 mol/L, the aggregates lost their spherical shape. The study also explored the addition of carbon black (CB), a water-dispersible material due to its surface charge. The findings revealed that NaCl induced the phase separation between the charged silica particles and CB, resulting in Janus-shaped photonic balls─one side exhibiting structural color and the other side appearing black due to the presence of CB. Changing the silica particle size altered the hues of these Janus-shaped photonic balls, though they appeared uniformly colored to the naked eye. While this study did not specifically examine the applications of Janus-shaped photonic balls composed of silica particles and CB, CB is known for its ability to absorb near-infrared radiation and convert it into heat as well as its conductive properties. Silica, on the other hand, has a low thermal conductivity and acts as an electrical insulator. The structurally colored Janus-shaped photonic balls created in this study may serve as pigments in applications requiring anisotropic heat generation and electrical conduction. Additionally, the study's findings suggest the potential for creating various types of Janus-shaped photonic balls from materials with differing densities.

Biomimetic Colored Coating toward Robust Display under Hostile Conditions

Structural colors particularly of the angle-independent category stemming from wavelength-dependent light scattering have aroused increasing interest due to their considerable applications spanning displays and sensors to detection. Nevertheless, these colors would be heavily altered and even disappear during practical applications, which is related with the variation of refractive index mismatch by liquid wetting/infiltrating. Inspired by bird feathers, we propose a simple deposition toward the coating with angle-independent structural color and superamphiphobicity. The coating is composed of ∼200 nm-sized channel-type structures between hollow silica and air nanostructures, exhibiting a robust sapphire blue color independent of intense liquid intrusion, which duplicates the characteristics of the back feather of Eastern Bluebird. A high color saturation and superamphiphobicity of the biomimetic coating are optimized by manipulating the coating parameters or adding black substances. Excellent durability under harsh conditions endows the coating with long-term service life in various extreme environments.

2D Photonic Colloidal Liquid Crystals Composed of Self-Assembled Rod-Shaped Particles

Photonic crystals, characterized by their periodic structures, have been extensively studied for their ability to manipulate light. Typically, the development of 2D photonic crystals requires either sophisticated equipment or precise orientation of spherical nanoparticles. However, liquid-crystalline (LC) materials offer a promising alternative, facilitating the formation of periodic structures without the need for complex manipulation. Despite this advantage, the development of 2D photonic periodic structures using LC materials is limited to a few colloidal nanodisk liquid crystals. Herein, 2D photonic colloidal liquid crystals composed of biomineral-based nanorods and water is reported. The soft photonic materials with 2D structure by self-assembled LC colloidal nanorods are unique and a new class of photonic materials different from conventional solid 2D photonic materials. These colloids exhibit bright structural colors with high reflectance (>50%) and significant angular dependency. The structural colors are adjusted by controlling the concentration and size of the LC colloidal nanorods. Furthermore, mechanochromic hydrogel thin films with 2D photonic structure are developed. The hydrogels exhibit reversible mechanochromic properties with angular dependency, which can be used for an advanced stimuli responsible sensor.

Structural Color Enhancement through Synchronizing Natural Convection and Marangoni Flow in Pendant Drops

Structural color, renowned for its enduring vibrancy, has been extensively developed and applied in the fields of display and anticounterfeiting. However, its limitations in brightness and saturation hinder further application in these areas. Herein, we propose a pendant evaporation self-assembly method to address these challenges simultaneously. By leveraging natural convection and Marangoni flow synchronization, the self-assembly process enhances the dynamics and duration of colloidal nanoparticles, thereby enhancing the orderliness of colloidal photonic crystals. On average, this technique boosts the brightness of structural color by 20% and its saturation by 35%. Moreover, pendant evaporation self-assembly is simple and convenient to operate, making it suitable for industrial production. We anticipate that its adoption will remarkably advance the industrialization of structural color, facilitating its engineering applications across various fields, such as display technology and anticounterfeiting identification.

Intermediate filaments spatially organize intracellular nanostructures to produce the bright structural blue of ribbontail stingrays across ontogeny

In animals, pigments but also nanostructures determine skin coloration, and many shades are produced by combining both mechanisms. Recently, we discovered a new mechanism for blue coloration in the ribbontail stingray Taeniura lymma, a species with electric blue spots on its yellow-brown skin. Here, we characterize finescale differences in cell composition and architecture distinguishing blue from non-blue regions, the first description of elasmobranch chromatophores and the nanostructures responsible for the stingray's novel structural blue, contrasting with other known mechanisms for making nature's rarest color. In blue regions, the upper dermis comprised a layer of chromatophore units -iridophores and melanophores entwined in compact clusters framed by collagen bundles- this structural stability perhaps the root of the skin color's robustness. Stingray iridophores were notably different from other vertebrate light-reflecting cells in having numerous fingerlike processes, which surrounded nearby melanophores like fists clenching a black stone. Iridophores contained spherical iridosomes enclosing guanine nanocrystals, suspended in a 3D quasi-order, linked by a cytoskeleton of intermediate filaments. We argue that intermediate filaments form a structural scaffold with a distinct optical role, providing the iridosome spacing critical to produce the blue color. In contrast, black-pigmented melanosomes within melanophores showed space-efficient packing, consistent with their hypothesized role as broadband-absorbers for enhancing blue color saturation. The chromatophore layer's ultrastructure was similar in juvenile and adult animals, indicating that skin color and perhaps its ecological role are likely consistent through ontogeny. In non-blue areas, iridophores were replaced by pale cells, resembling iridophores in some morphological and nanoscale features, but lacking guanine crystals, suggesting that the cell types arise from a common progenitor cell. The particular cellular associations and structural interactions we demonstrate in stingray skin suggest that pigment cells induce differentiation in the progenitor cells of iridophores, and that some features driving color production may be shared with bony fishes, although the lineages diverged hundreds of millions of years ago and the iridophores themselves differ drastically.

Enhancing color saturation in photonic glasses through optimized absorption

Photonic glasses, isotropically assembled nanoparticles with short-range correlation, can produce angle independent structural colors. They show broader reflectance spectra and lower saturated colors, compared to photonic crystals. Low color saturation creates barriers for photonic glasses to be used for coatings, cosmetics, and colors. Broadband absorbing materials are commonly used to absorb incoherently scattered light to enhance the saturation. However, there is limited understanding on how the absorption quantitatively affects the colors of photonic glasses. To this end, we here use a validated Monte Carlo-based multiple scattering model to investigate how absorption impacts the reflectance spectra in photonic glasses. We show that the color saturation can be maximized with an optimal level of absorption regardless of sample thickness or refractive index contrast between particles and matrix. We quantitatively demonstrate that the multiple scattering is largely reduced with the optimal absorption level and the reflectance is dominantly contributed by the single scattering. The optimal absorption occurs when the sample absorption mean free path is comparable to the transport mean free path, which offers a guidance on how much absorbing material is needed for creating highly saturated photonic glasses. This work will not only pave ways for pushing applications of angle-independent structural colors, but also improve our understanding of light scattering and absorption in short-range correlated disordered systems.

Non-iridescent Structurally Colored Pigments Based on CB@SiO2@TiO2 Core-Bishell Nanospheres with Enhanced Color Stability and Excellent Photocatalytic Activity

In recent years, artificial amorphous photonic structure (APS) materials with high color saturation and angle independence have been competitively reported. However, there is a lack of research into their functionalization and application in practical environments. Here, with practical applications in mind, we prepared APS pigments based on CB@SiO2@TiO2 core-bishell nanospheres and demonstrated high color saturation, enhanced color stability, and excellent photocatalytic activity. SiO2 effectively protected the carbon black particles from ablation during the calcination process. Paints composed of ethanol, ethyl cellulose (EC), and pigments could be spray-coated on any substrate to prepare a structurally colored coating without limitation. The coatings show good mechanical stability and photothermal stability. The color of the structurally colored pigments can be easily changed by adjusting the sizes of the CB@SiO2@TiO2 nanospheres. The photocatalytic activity of the pigments on formaldehyde (HCHO) and methylene blue (MB) solution and reaction kinetics of their degradation were studied by experiment. The results showed that the photocatalytic activity of the pigments increased with the increase of the TiO2 loading, and the degradation rate of HCHO reached 96.7% for 3 h and that of MB reached 97.9% for 60 min when the TiO2 shell thickness was 40 nm. The structurally colored pigments based on CB@SiO2@TiO2 nanospheres effectively solve the environmental problems caused by the application of pigments and have a promising future in the fields of color decoration, display, and painting.

Optically Transparent and Color-Stable Elastomer with Structural Coloration under Elongation

Optically transparent and colored elastomers with high toughness are expected to play an important role in the construction of advanced medical materials, wearable displays, and soft robots. In this study, we found that composite elastomers consisting of amorphous SiO2 particles homogeneously dispersed in high concentrations within a biocompatible acrylic polymer network exhibit optical transparency and bright structural colors. In the composite elastomers, the system in which the SiO2 particles form a colloidal amorphous array hardly changes its structural color hue despite deformation due to elongation. Furthermore, the composite elastomer of the SiO2 particles with the acrylic polymer network also results in high mechanical toughness. In summary, we have shown that the elastomer that exhibits fade-resistant structural coloration formed from safe materials can combine stable coloration and mechanical strength independent of their shape. This is expected to have new potential in future technologies to support our daily life.

Construction of Steady Amorphous Colloidal Array Patterns via Infiltration-Driven Assembly of Core-Shell Microparticles followed by Short-Time Heating

Although core-shell microparticles with a hard core and soft shell are often used to fabricate photonic crystal films, they are rarely applied to construct steady amorphous colloidal array (ACA) patterns. In this work, a series of monodisperse core-shell microparticles with a polystyrene (PS) core and poly(methyl methacrylate-butyl acrylate) (P(MMA-BA)) shell have been successfully synthesized, and the glass transition temperatures (Tg) of the shell layer have been well regulated. The synthesized core-shell microparticles were then used to fabricate ACA patterns via a convenient infiltration-driven assembly method. The results showed that the Tg of the shell significantly affected the microstructure of the amorphous colloidal arrays (ACAs). During the assembly process, the microparticles quickly contacted each other and the lower-Tg shells could merge with each other to form a continuous film. In this situation, the PS core was embedded and ranked in the P(MMA-BA) film, and both the refractive index contrast and order degree of the colloidal array became relatively low, resulting in a poor structural color. However, when the Tg of the shell layer was moderately high, a short-range ordered array was prepared via infiltration-driven assembly, thereby displaying a bright structural color. More importantly, the shell layers could merge with each other to some extent after short-time heating, resulting in fine mechanical stability. In brief, this study provides a facile and environmental approach to construct steady ACA patterns, which is promising in printing and painting industries.

Structural Design of Intelligent Reversible Two-Way Structural Color Films

Structural color always shows a reversible switch between reflection and transmission states when viewed from different angles, attracting increasing attention in display applications. However, this switching between reflection and transmission states of structural color suffers from the inherent lack of autonomous regulation, which is unmanageable in the case of different application scenarios. Here, we design an intelligent two-way structural color film which can reversibly change its color when applied with an extra stimulation such as voltage, heat signal, or light. A special structural feature contains a traditional photonic crystal film of polystyrene (PS) microspheres assembled by smart windows. Remarkably, our structural color film shows a prominent polarization sensitivity, and the angle dependence of the structural color broadens the gamut of display color demonstrated by both finite element theoretical analysis and experimental observation. Prospectively, this hierarchically designed film provides a promising pathway toward next-generation multicolor displays and smart windows.

Mechanism of structural colors in binary mixtures of nanoparticle-based supraballs

Inspired by structural colors in avian species, various synthetic strategies have been developed to produce noniridescent, saturated colors using nanoparticle assemblies. Nanoparticle mixtures varying in particle chemistry and size have additional emergent properties that affect the color produced. For complex multicomponent systems, understanding the assembled structure and a robust optical modeling tool can empower scientists to identify structure-color relationships and fabricate designer materials with tailored color. Here, we demonstrate how we can reconstruct the assembled structure from small-angle scattering measurements using the computational reverse-engineering analysis for scattering experiments method and use the reconstructed structure in finite-difference time-domain calculations to predict color. We successfully, quantitatively predict experimentally observed color in mixtures containing strongly absorbing nanoparticles and demonstrate the influence of a single layer of segregated nanoparticles on color produced. The versatile computational approach that we present is useful for engineering synthetic materials with desired colors without laborious trial-and-error experiments.

Nacre-inspired layered composite gels with broad tunable mechanical strength and structural color for stress visualization

The brick-and-mortar architecture of nacre shells brings radiant structural colors, high toughness, and strength, inspiring numerous designs for structural and optical materials. However, constructing structural color is not always easy, especially among soft materials where aligning components against random and dynamically active environments is generally difficult. Here, we propose a composite organohydrogel capable of visualizing multiple levels of stress, featuring broad tunable mechanical properties, dynamic mechanochromism, deep low working temperatures, and anti-drying attributes. In the composite gels, the intercalation between α-zirconium phosphate (α-ZrP) nanoplates and poly-(diacetone acrylamide-co-acrylamide) is induced by shear-orientation-assisted self-assembly followed by solvent replacement. The highly tailorable (from ∼780 nm to ∼445 nm) range of colors was achieved by regulating the concentration of α-ZrP and glycerol inside the matrix. With the help from glycerol, the composite gels exhibited long-term stability (7 d) in the arid condition and remarkable low-temperature tolerance (-80 °C). The extraordinary mechanical property (compressive strength up to 119 MPa) of composite gels is achieved by the assembled α-ZrP plates with a small aspect ratio, high negative charge repulsion, and abundant hydrogen bonding sites. As a result, the mechanochromic sensor based on the composite gel enjoys a wide range of stress detection (0-1862 KPa). This study provides a new strategy for constructing high strength structural-colored gels, opening up opportunities for sensitive yet strong mechanochromic sensors in extreme environments.

Construction of cellulose structural-color pigments with tunable colors and iridescence/non-iridescence

Structural colorations have been recognized as a significant way to replace conventional organic dyes for paints, inks, packaging, and cosmetics because of brilliant colors, high stability, and eco-friendliness. However, most current structural-color pigments present an iridescent appearance, and it remains difficult to mitigate a trade-off between lowering the iridescence effect and maintaining the color saturation and brightness. Here, we demonstrate a universal yet economical approach to prepare cellulose structural-color pigments with different sizes. A combined ultrasonication and grinding treatment is explored to adjust the pigment colors as well as control the iridescence-to-non-iridescence transition that depends on the pigment size. The cellulose pigments can be applied on irregular and curved surfaces, having high water-, chemical-, and mechanical-resistances. With humidity-sensing behaviors, the pigments can be further integrated into monitoring systems for environmental management. Such a preparation strategy overcomes the limitation of controlling iridescent and non-iridescent structural colors without sacrificing color properties, which may bring more opportunities to develop new eco-friendly pigments for wide applications.

Electromagnetic response of corrugated multilayer systems inspired by the Dione vanillae butterfly scales

Inspired by the microstructures in the wing scales of the butterfly Dione vanillae, we investigate the optical response of two multilayer structures, which include one or two corrugated interfaces. The reflectance is calculated using the C-method and is compared with that of a planar multilayer. We perform a detailed analysis of the influence of each geometric parameter and study the angular response, which is important for structures exhibiting iridescence. The results of this study aim to contribute to the design of multilayer structures with predetermined optical responses.

Interfacial Colloidal Self-Assembly for Functional Materials

ConspectusSelf-assembly bridges nanoscale and microscale colloidal particles into macroscale functional materials. In particular, self-assembly processes occurring at the liquid/liquid or solid/liquid/air interfaces hold great promise in constructing large-scale two- or three-dimensional (2D or 3D) architectures. Interaction of colloidal particles in the assemblies leads to emergent collective properties not found in individual building blocks, offering a much larger parameter space to tune the material properties. Interfacial self-assembly methods are rapid, cost-effective, scalable, and compatible with existing fabrication technologies, thus promoting widespread interest in a broad range of research fields.Surface chemistry of nanoparticles plays a predominant role in driving the self-assembly of nanoparticles at water/oil interfaces. Amphiphilic nanoparticles coated with mixed polymer brushes or mussel-inspired polydopamine were demonstrated to self-assemble into closely packed thin films, enabling diverse applications from electrochemical sensors and catalysis to surface-enhanced optical properties. Interfacial assemblies of amphiphilic gold nanoparticles were integrated with graphene paper to obtain flexible electrodes in a modular approach. The robust, biocompatible electrodes with exceptional electrocatalytic activities showed excellent sensitivity and reproducibility in biosensing. Recyclable catalysts were prepared by transferring monolayer assemblies of polydopamine-coated nanocatalysts to both hydrophilic and hydrophobic substrates. The immobilized catalysts were easily recovered and recycled without loss of catalytic activity. Plasmonic nanoparticles were self-assembled into a plasmonic substrate for surface-enhanced Raman scattering, metal-enhanced fluorescence, and modulated fluorescence resonance energy transfer (FRET). Strong Raman enhancement was accomplished by rationally directing the Raman probes to the electromagnetic hotspots. Optimal enhancement of fluorescence and FRET was realized by precisely controlling the spacing between the metal surface and the fluorophores and tuning the surface plasmon resonance wavelength of the self-assembled substrate to match the optical properties of the fluorescent dye.At liquid/solid interfaces, infiltration-assisted (IFAST) colloidal self-assembly introduces liquid infiltration in the substrate as a new factor to control the degree of order of the colloidal assemblies. The strong infiltration flow leads to the formation of amorphous colloidal arrays that display noniridescent structural colors. This method is compatible with a broad range of colloidal particle inks, and any solid substrate that is permeable to dispersing liquids but particle-excluding is suitable for IFAST colloidal assembly. Therefore, the IFAST technology offers rapid, scalable fabrication of structural color patterns of diverse colloidal particles with full-spectrum coverage and unprecedented flexibility. Metal-organic framework particles with either spherical or polyhedral morphology were used as ink particles in the Mayer rod coating on wettability patterned photopapers, leading to amorphous photonic structures with vapor-responsive colors. Anticounterfeiting labels have also been developed based on the complex optical features encoded in the photonic structures.Interfacial colloidal self-assembly at the water/oil interface and IFAST assembly at the solid/liquid/air interface have proven to be versatile fabrication platforms to produce functional materials with well-defined properties for diverse applications. These platform technologies are promising in the manufacturing of value-added functional materials.

Photonic Lignin with Tunable and Stimuli-Responsive Structural Color

Due to the growing sustainability and health requirements, structural color materials fabricated with functional natural polymers have attracted increasing attention in advanced optical and biomedical fields. Lignin has many attractive features such as great biocompatibility, ultraviolet resistance, antioxidant property, and thermostability, making it a promising natural resource to be fabricated as functional structural color materials. However, to date, the utilization of lignin as the building block for structural color materials is still a challenge due to its disordered structure. Herein, we present a strategy to transform disordered lignin into ordered "photonic lignin", in which monodisperse lignin colloidal spheres are prepared via solvent/antisolvent self-assembly, and then the periodic structure is constructed by centrifugal effect. The photonic lignin exhibits structural colors that are tunable by modulating the diameter of lignin colloidal spheres. We further demonstrate the application of photonic lignin as a natural polymer-based coating that shows bright, angle-independent, and stimuli-responsive structural colors. Moreover, the cytotoxicity assay indicates the excellent biocompatibility of photonic lignin with human skin, blood vessels, digestive systems, and other tissues, which demonstrates the great potential of photonic lignin in the applications such as implanted/wearable optical devices, advanced cosmetics, and smart food packaging.

Bioinspired MXene-Based Soft Actuators Exhibiting Angle-Independent Structural Color

In nature, many living organisms exhibiting unique structural coloration and soft-bodied actuation have inspired scientists to develop advanced structural colored soft actuators toward biomimetic soft robots. However, it is challenging to simultaneously biomimic the angle-independent structural color and shape-morphing capabilities found in the plum-throated cotinga flying bird. Herein, we report biomimetic MXene-based soft actuators with angle-independent structural color that are fabricated through controlled self-assembly of colloidal SiO2 nanoparticles onto highly aligned MXene films followed by vacuum-assisted infiltration of polyvinylidene fluoride into the interstices. The resulting soft actuators are found to exhibit brilliant, angle-independent structural color, as well as ultrafast actuation and recovery speeds (a maximum curvature of 0.52 mm-1 can be achieved within 1.16 s, and a recovery time of ~ 0.24 s) in response to acetone vapor. As proof-of-concept illustrations, structural colored soft actuators are applied to demonstrate a blue gripper-like bird's claw that can capture the target, artificial green tendrils that can twine around tree branches, and an artificial multicolored butterfly that can flutter its wings upon cyclic exposure to acetone vapor. The strategy is expected to offer new insights into the development of biomimetic multifunctional soft actuators for somatosensory soft robotics and next-generation intelligent machines.

Wafer-Scale Full-Coverage Self-Limiting Assembly of Particles on Flexible Substrates

Self-limiting assembly of particles represents the state-of-the-art controllability in nanomanufacturing processes where the assembly stops at a designated stage, providing a desirable platform for applications requiring delicate thickness control such as optics, electronics, and catalytic systems. Most successes in self-limiting assembly are limited to self-assembled monolayers (SAMs) of small molecules on inorganic, chemically homogeneous rigid substrates (e.g., Au and SiO₂) through surface-interaction mechanisms. Similar mechanisms, however, cannot achieve a uniform assembly of particles on flexible polymer substrates. The complex configurations and conformations of polymer chains create a surface with nonuniform distributions of chemical groups and phases. In addition, most assembly mechanisms require good solvent wettability, where many desirable but hard-to-wet particles and polymer substrates are excluded. Here, we demonstrate a collision-based self-limiting assembly (CSA) to achieve wafer-scale, full-coverage, close-packed monolayers of hydrophobic particles on hydrophobic polymer substrates in aqueous solutions. The kinetic assembly and self-limiting processes are facilitated and controlled by the combined acoustic and shear fields. We envision many applications in functional coatings and showcase their feasibility in structural coloration. Importantly, such functional coatings can be repaired using CSA, and both particles and polymer substrate can be recycled.

The Fabrication of Full Chromatography SiO2@PDA Photonic Crystal Structural Colored Fabric with High Thermal Stability

Traditional textile dyeing and finishing industries are two of the most important sources of high pollution, high energy consumption, and high emissions. Structural color, as a clean ecological staining method that does not require any dye or pigment, has received extreme attention from researchers. In this study, core-shell structures of SiO2@PDA microspheres were prepared by coating polydopamine (PDA) formed by rapid polymerization of dopamine (DA) on the surface of SiO2 microspheres. Moreover, the structural colors of full chromatography were successfully prepared by vertical self-assembly on silk. The morphology and chemical structure of the prepared SiO2@PDA microspheres were studied by SEM and FT-IR, and the morphology and optical properties of the structured colored fabrics were characterized by SEM and material microscope. The different structural colors of the entire visible region were obtained by controlling the particle size of SiO2@PDA microspheres and the viewing angle of the SiO2@PDA photonic crystal, which are consistent with Bragg’s diffraction law. Since the SiO2@PDA photonic crystal has thermal stability, the prepared structural color fabric could remain highly saturated in color at temperatures up to 200 °C. This has a previously unreported high thermal stability on structural colors of silk. Therefore, the research work will demonstrate a structural color fabric that can prepare full chromatography with high thermal stability.

Biomimetic Robust Starch Composite Films with Super-Hydrophobicity and Vivid Structural Colors

The starch composite films (SCFs) will be one of the best alternative packaging materials to petroleum based plastic films, which mitigates white pollution and energy consumption. However, weak mechanical stability, water resistance, and dyeability has hindered the application of SCFs. Herein, a bioinspired robust SCFs with super-hydrophobicity and excellent structural colors were prepared by fiber-reinforcement and assembling SiO₂/Polydimethylsiloxane (PDMS) amorphous arrays on the surface of SCFs. The properties of the designed SCFs were investigated by various methods including scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), a tensile test, contact angle (CA) test, and an optical test. The results showed that the obtained SCFs possessed a higher tensile strength (55.17 MPa) attributed to the formed abundant hydrogen bonds between the molecular chains of the starch, cellulose fiber, and polyvinyl alcohol. Benefiting from the nanostructure with rough surface which were modified by materials with low surface free energy, the contact angle and sliding angle of the film reached up to 154° and 2°, respectively. The colors which were produced by the constructive interference of the coherent scattered light could cover all of the visible regions by tuning the diameters of the SiO₂ nanoparticles. The strategy in the present study not only reinforces the mechanical strength and water resistance of SCFs but also provides an environmentally friendly way to color the them, which shows unprecedented application potential in packaging materials of the starch composite films.

Cephalopod-Mimetic Tunable Photonic Coatings Assembled from Quasi-Monodispersed Reflectin Protein Nanoparticles

The remarkable dynamic camouflage ability of cephalopods arises from precisely orchestrated structural changes within their chromatophores and iridophores photonic cells. This mesmerizing color display remains unmatched in synthetic coatings and is regulated by swelling/deswelling of reflectin protein nanoparticles, which alters platelet dimensions in iridophores to control photonic patterns according to Bragg's law. Toward mimicking the photonic response of squid's skin, reflectin proteins from Sepioteuthis lessioniana were sequenced, recombinantly expressed, and self-assembled into spherical nanoparticles by conjugating reflectin B1 with a click chemistry ligand. These quasi-monodisperse nanoparticles can be tuned to any desired size in the 170-1000 nm range. Using Langmuir-Schaefer and drop-cast deposition methods, ligand-conjugated reflectin B1 nanoparticles were immobilized onto azide-functionalized substrates via click chemistry to produce monolayer amorphous photonic structures with tunable structural colors based on average particle size, paving the way for the fabrication of eco-friendly, bioinspired color-changing coatings that mimic cephalopods' dynamic camouflage.

Understanding the Electrophoretic Deposition Accompanied by Electrochemical Reactions Toward Structurally Colored Bilayer Films

Safe, low-cost structurally colored materials are alternative colorants to toxic inorganic pigments and organic dyes. Colloidal amorphous arrays are promising structurally colored materials because of their angle-independent colors. In this study, we focused on precise tuning of the chromaticity by preparing bilayer colloidal amorphous arrays through electrophoretic deposition (EPD). Systematic investigations with various EPD conditions clarified the contributions of each condition to the EPD process and the competing electrochemical reactions, which enabled us to prepare well-colored coatings. EPD films composed of colloidal amorphous array bilayers were successfully synthesized with controlled film thickness. Chromaticity of the films was found to be precisely controlled by the EPD duration. We believe that this understanding of the EPD process and its application to synthesis of structurally colored bilayer films will bring structurally colored materials closer to practical industrial use.

Rapid Assembly of Magnetoplasmonic Photonic Arrays for Brilliant, Noniridescent, and Stimuli-Responsive Structural Colors

There are usually trade-offs between maximizing the color saturation and brightness and minimizing the angle-dependent effect in structural colors. Here, a magnetic field-induced assembly for the rapid formation of scalable, uniform amorphous photonic arrays (APAs) featuring unique structural colors is demonstrated. The magnetic field plays a fundamental role in photonic film formation, making this assembly technology versatile for developing structural color patterns on arbitrary substrates. The synergistic combination of surface plasmonic resonance of the Ag core and broadband light absorption of high refractive index (RI) Fe₃ O₄ shell in hybrid magnetoplasmonic nanoparticles (MagPlas NPs) enables breaking the trade-offs to produce brilliant, noniridescent structural colors with high tunability and responsiveness. These features enable the fabrication of various types of highly sensitive and reliable colorimetric sensors for naked-eye detection without sophisticated instruments. Furthermore, large-scale structural color patterns are effortlessly achieved, demonstrating the high potential of the present approach for full-spectrum displays, active coatings, and rewritable papers.

Bioinspired Color Elastomers Combining Structural, Dye, and Background Colors

Organisms that alter body color undergo color change in response to environmental variations and stimuli by combining chromatophores that develop colors by various mechanisms. Inspired by their body color changes, we can develop sensors and optical materials that change colors in response to multiple stimuli, such as mechanical and light stimuli. In this study, we report on bioinspired composite elastomers that exhibit various color changes as the pigment color, structural color, and background color change. These composite elastomers exhibit structural colors due to their fine structures in which fine silica particles form colloidal crystals, and the structural colors reversibly change as the elastomers elongate. Furthermore, photochromic dyes can reversibly change color depending on the wavelength of irradiated light when they are introduced to the composite elastomers. Since the structural color is one of the three primary colors of light and the pigment color is the color that corresponds to the three primary colors of a pigment, each color becomes vivid when the background color is black or white. Thus, we clarify that the composite elastomers exhibit various color changes due to the combination of structural color change in response to the mechanical stimulus, pigment color change in response to light irradiation, and background color change.

Chiral optical scattering from helical and twisted silica nanoribbons

Helical and twisted silica nanoribbons, deposited in an in-plane direction and with a random orientation, on a quartz substrate showed chiral optical scattering, and the helical nanoribbons had a g-factor of the order of 10^-2 below 250 nm. Their signs depend on the handedness of the nanohelices. The effect of the morphology and the orientation of the helices on the chiral optical scattering were investigated with simulations via the boundary element method.

Rayleigh method adapted for the study of the optical response of natural photonic structures

To study the electromagnetic response of natural structures that exhibit interesting optical properties, we developed a computational tool to solve the problem of electromagnetic scattering by a rough interface between two isotropic media, based on the Rayleigh method. The key aspect of the developed formalism is its capability of introducing the interface profile within the code by means of a digitalized image of the structure, which can be either obtained from an electron microscopy image or simply by design according to the complexity of the scattering surface. As application examples, we show the results obtained for surfaces taken directly from microscopy images of two different biological species. This approach constitutes a fundamental step in order to model the electromagnetic response of natural photonic structures.

Noniridescent structural color from enhanced electromagnetic resonances of particle aggregations and its applications for reconfigurable patterns

HYPOTHESIS

The conventional noniridescent structural colors refer to the coherent scattering of visible light by the short-range ordered structures assembled from the small colloids (100-250 nm). Our hypothesis is that noniridescent structural color can be generated by the random aggregations of large silica particles through the enhanced electromagnetic resonances.

EXPERIMENTS

The random aggregations of large silica particles (350-475 nm) were prepared through the infiltration of silica particles solution with the porous substrate. The mechanism of the structural color is investigated. Reconfigurable patterns are prepared.

FINDINGS

Dissimilar to the conventional noniridescent colors, the angle-independent colors of silica aggregations originate from the enhanced electromagnetic resonances due to the random aggregation of the particles. The colors (blue, green, and red) and corresponding reflection peak positions of the particle aggregations can be well controlled by simply altering the size of the silica particles. Compared to the traditional prints with permanent patterns, reconfigurable patterns with large-area and multicolor can be fabricated by the repeatedly selective spray of water on the substrate pre-coated with noniridescent colors. This work provides new insight and greenway for the fabrication of noniridescent structural colors and reconfigurable patterns, and will promote their applications in soft display, green printing, and anti-counterfeiting.

Tailoring Disorder and Quality of Photonic Glass Templates for Structural Coloration by Particle Charge Interactions

To obtain high-quality homogeneous photonic glass-based structural color films over large areas, it is essential to precisely control the degree of disorder of the spherical particles used and reduce the crack density within the films as much as possible. To tailor the disorder and quality of photonic glasses, a heteroaggregation-based process was developed by employing two oppositely charged equal-sized polystyrene (PS) particle types. The influence of the particle size ratio on the extent of heteroaggregation in the suspension mixes is investigated and correlated with both the morphology and the resultant optical properties of the films. The results show that the oppositely charged particle size ratio within the mix greatly influences the assembled structure in the films, affecting their roughness, crack density, and the coffee-ring formation. To better differentiate the morphology of the films, scanning electron microscopy images of the microstructures were classified by a supervised training of a deep convolutional neural network model to find distinctions that are inaccessible by conventional image analysis methods. Selected compositions were then infiltrated with TiO₂ via atomic layer deposition, and after removal of the PS spheres, surface-templated inverse photonic glasses were obtained. Different color impressions and optical properties were obtained depending on the heteroaggregation level and thus the quality of the resultant films. The best results regarding the stability of the films and suppression of coffee-ring formation are obtained with a 35 wt % positively charged over negatively charged particle mix, which yielded enhanced structural coloration associated with improved film quality, tailored by the heteroaggregation fabrication process.

Control of Structural Coloration by Natural Sunlight Irradiation on a Melanin Precursor Polymer Inspired by Skin Tanning

Natural melanin affects the reflection and absorption of light, and it is known as an important element in producing bright structural colors in nature. In this study, we prepared core-shell particles using a melanin precursor polymer, that is, polytyrosine (PTy), as a shell layer by the oxidative polymerization of tyrosine ethyl ester (Ty) in the presence of cerium oxide (CeO₂) core particles. Inspired by skin tanning, irradiating the CeO₂@PTy core-shell particles with UV or natural sunlight caused melanization by extending the π-conjugated length of PTy, producing colloidal particles with the ability to absorb light. The pellet samples consisting of CeO₂@PTy particles appeared whitish because of multiple scattered light. In contrast, the light absorption capacity of CeO₂@PTy UV or CeO₂@PTy Sun particles after light irradiation suppressed scattered light, dramatically improving the visibility of the structural color of the pellet samples made from these particles. Thus, a new method has been developed to control the visualization of structural colors to the human eye by irradiating the melanin precursor polymer with light.

Color matching ability of resin composites incorporating supra-nano spherical filler producing structural color

OBJECTIVE

The aim of this study was to evaluate the optical properties of supra-nano spherical fillers with different diameters and the color matching ability of resin composites (RC) incorporating these fillers.

METHODS

Two types of SiO₂-ZrO₂ nano fillers with different diameters (150nm and 260nm) were used. The size distribution of each filler was measured and filler morphology was observed. The colors and spectral reflection spectra were measured by a spectral reflectometer. Experimental RCs incorporating ϕ150-nm/ϕ260-nm filler (D150RC/D260RC) were prepared. For the base dentin part, disc specimens (Estelite Astelia: A1B, A2B, A3B, A3.5B, or A4B) were prepared with a cylindrical cavity. Estelite Astelia with NE shade was layered on top as the enamel layer. Disk specimens with different cavity depths were prepared using A3B shade. Experimental RC was used to fill the cavity, and spectral reflection spectrums were obtained and analyzed. Filtek Supreme Ultra (FSU) with A3B shade was used (n=10) as a control.

RESULTS

Both ϕ150-nm and ϕ260-nm nano fillers showed uniform spherical shape and exhibited no aggregation. The maximum peaks of the spectral reflection spectra of the ϕ150-nm and ϕ260-nm nano fillers were 380nm and 580nm, producing structural colors close to blue and yellow, respectively. The spectral reflection spectrum of FSU had a broad peak at 540nm, and D150RC had a significant peak at 420nm. The D260RC specimen had a broad peak at 680nm. The peaks of D150RC and D260RC significantly decreased in accordance with the shift in base RC shade from A1B to A4B. There was no significant difference in the peak of the reflection spectral spectra among different cavity depths of D260RC. These results suggest that the experimental RC could reflect base RC colors via the matrix resin, and the amount of transmitted light from the base RC was not much different with cavity depth.

SIGNIFICANCE

D260RC producing structural color demonstrated a broad spectrum and reduction in brightness and chromatic value by adapting to surrounding restorative materials, suggesting its ability to enhance the chameleon (blending) effects to improve color matching. D260RC showed better color matching ability than resin composite containing uniformly sized ϕ150-nm SiO₂-ZrO₂ supra-nano spherical filler.

Photonic Plasticines with Uniform Structural Colors, High Processability, and Self-Healing Properties

Despite the vast variety of colloidal superstructures available in soft matter photonics, it remains challenging to balance the trade-off between their optical microstructures and material processability. By synergizing colloidal photonics and dynamic chemistry, a type of photonic "plasticine" with characteristics of uniform structural colors, high processability, and self-healing is demonstrated. Specifically, a boronate ester bond-based macromonomer is first prepared through complexation between the diols of polyvinyl alcohol and the boronic acid group of 3-(acrylamido) phenylboronic acid in the presence of concentrated silica colloids. Upon photopolymerization, the dynamic photonic plasticine is formed in situ as the result of the crosslinking of the boronate ester bonded networks. The randomly packed colloids inside the plasticine compose the amorphous photonic crystals, giving rise to angle-independent structural colors that would not compromise during subsequent processing steps; the reversible nature of the boronate ester bonds endows the plasticine with self-adaptable and self-healing properties. Further, the plasticine is also compatible with common shaping methods, that is, cutting, molding, and carving, and thus can be facilely processed into 3D structural colored objects, holding great potentials in fields such as bio-encoding, optical filters, anti-counterfeiting, etc.

Progress in polydopamine-based melanin mimetic materials for structural color generation

Structural color is a color derived from optical interaction between light and a microstructure and is often seen in nature. Natural melanin plays an important role in bright structural coloration. For example, the vivid colors of peacock feathers are due to structural colors. The periodic arrangement of melanin granules inside the feathers leads to light interference, and the black granules absorb scattered light well, resulting in bright structural color. In recent years, polydopamine (PDA) has attracted attention as a melanin mimetic material. This review article summarizes recent research on structural coloration using PDA-based artificial melanin materials. It also outlines possible applications using bright structural colors realized by artificial melanin materials and future perspectives.

Robust, Portable, and Specific Water-Response Silk Film with Noniridescent Pattern Encryption for Information Security

In modern days, information is a key resource for accelerating the development of society, economy, and culture. Thus, information security has always been a high priority for any country, business, and department. Herein, a simple and effective strategy for preparing an independent optical device for information security is proposed by using silk fibroin materials with a quasiamorphous inverse structure. Given the reversible hydrogen bonds between silk fibroin materials and water molecules, a multicolor high-resolution pattern with a variable color can be obtained by using a simple spray coating method. Furthermore, a reversible water stimulus-response silk film with a laminated structure that consists of hidden and patterned layers and carries quick response (QR) code information is prepared. This device effectively hides (encryption) the QR code pattern in a normal environment and quickly displays the information (decryption) in water. Simultaneously, the silk film shows good mechanical strength, excellent biocompatibility, long-term structural stability, and a unique response mechanism, which make it a suitable carrier of optical information. Thus, this new preparation strategy of an optical device has a potential application value and is an important reference in the fields of information security and functional materials.

Optical costs and benefits of disorder in biological photonic crystals

Photonic structures in ordered, quasi-ordered or disordered forms have evolved across many different animal and plant systems. They can produce complex and often functional optical responses through coherent and incoherent scattering processes, often too, in combination with broadband or narrowband absorbing pigmentation. Interestingly, these systems appear highly tolerant of faults in their photonic structures, with imperfections in their structural order appearing not to impact, discernibly, the systems' optical signatures. The extent to which any such biological system deviates from presenting perfect structural order can dictate the optical properties of that system and, thereby, the optical properties that system delivers. However, the nature and extent of the optical costs and benefits of imperfect order in biological systems demands further elucidation. Here, we identify the extent to which biological photonic systems are tolerant of defects and imperfections. Certainly, it is clear that often significant inherent variations in the photonic structures of these systems, for instance a relatively broad distribution of lattice constants, can consistently produce what appear to be effective visual appearances and optical performances. In this article, we review previously investigated biological photonic systems that present ordered, quasi-ordered or disordered structures. We discuss the form and nature of the optical behaviour of these structures, focusing particularly on the associated optical costs and benefits surrounding the extent to which their structures deviate from what might be considered ideal systems. Then, through detailed analyses of some well-known 1D and 2D structurally coloured systems, we analyse one of the common manifestations of imperfect order, namely, the extent and nature of positional disorder in the systems' spatial distribution of layers and scattering centres. We use these findings to inform optical modelling that presents a quantitative and qualitative description of the optical costs and benefits of such positional disorder among ordered and quasi-ordered 1D and 2D photonic systems. As deviation from perfectly ordered structures invariably limits the performance of technology-oriented synthetic photonic processes, we suggest that the use of bio-inspired fault tolerance principles would add value to applied photonic technologies.

Surface templated inverse photonic glass for saturated blue structural color

To substitute conventional pigments, which often are toxic or suffer from fading in ultraviolet light, non-iridescent structural colors should demonstrate high spectral selectivity, while being also mechanically stable. However, conventional photonic glass (PhG) shows low color saturation due to the gradual transition in the reflection spectrum and low mechanical stability due to weak interparticle attachment. Here, a PhG with sharp spectral transition in comparison with the conventional full sphere PhG is designed by a conformal coating via atomic layer deposition (ALD) onto an organic PhG template. The ALD deposition allows to control the film thickness precisely for the highly saturated color. This structure can be described by hollow particle motifs with the effective size larger than the interparticle distance. Such unusual PhG is motivated by the achievable features in the spatial Fourier transform of a disordered assembly of such motifs. The surface-templated inverse PhG shows much higher color saturation than the direct PhG from full spheres. Moreover, the dense and solid connected shell will be beneficial for mechanical stability. These results pave the way for highly saturated structural colors. The demonstrated sharp spectral selection feature can be also considered for many related applications such as sunscreens, photovoltaics and radiative cooling by adjusting the reflection transition to the required wavelength. This can be achieved by proportionally scaling the motif and lattice dimensions as well as the film thickness.

Effects of multiple scattering on angle-independent structural color in disordered colloidal materials

Disordered packings of colloidal spheres show angle-independent structural color when the particles are on the scale of the wavelength of visible light. Previous work has shown that the positions of the peaks in the reflectance spectra can be predicted accurately from a single-scattering model that accounts for the effective refractive index of the material. This agreement shows that the main color peak arises from short-range correlations between particles. However, the single-scattering model does not quantitatively reproduce the observed color: the main peak in the reflectance spectrum is much broader and the reflectance at low wavelengths is much larger than predicted by the model. We use a combination of experiment and theory to understand these features. We find that one significant contribution to the breadth of the main peak is light that is scattered, totally internally reflected from the boundary of the sample, and then scattered again. The high reflectance at low wavelengths also results from multiple scattering but can be traced to the increase in the scattering cross section of individual particles with decreasing wavelength. Both of these effects tend to reduce the saturation of the structural color, which limits the use of these materials in applications. We show that while the single-scattering model cannot reproduce the observed saturations, it can be used as a design tool to reduce the amount of multiple scattering and increase the color saturation of materials, even in the absence of absorbing components.

Asymmetric structural colors based on monodisperse single-crystal Cu2O spheres

Structural colors have attracted broad attention owing to their anti-photobleaching capability and brilliant metallic color. In particular, the asymmetric structural colors generated by a simple material will have great practical significance in the fields of biomimetic materials, double-side display and anti-counterfeiting. The asymmetric optical effects were usually achieved by the plasmonic effects of Ag or Au nanocrystals. Here, for the first time, we realized the asymmetric structural colors based on the asymmetric scattering of Cu₂O single-crystal spheres. By spray-coating Cu₂O spheres on a glass slide, different structural colors were viewed from the Cu₂O film side and the glass slide side. The FDTD simulations confirmed that the asymmetric colors were ascribed to the inhomogeneous distribution of the electric field intensity. The film built by 200 nm Cu₂O spheres on a glass slide shows green and cyan structural colors from the front and back sides, respectively. The colors on both sides of the Cu₂O films were proved to be tuned by changing the diameters of the Cu₂O single-crystal spheres. Different substrates were used to examine the influence of substrates on the asymmetric colors. Finally, inspired by different brilliant colors from the front and back of natural creatures, the patterns of butterfly and petals were fabricated by Cu₂O spheres. Impressively, similar to nature, the patterns show completely different colors viewed from the front and back sides. The asymmetric structural colors of Cu₂O single-crystal spheres will open up new avenues to realize multi-mode color output and pave their applications in display, biomimetic materials and anti-counterfeiting materials.

Bioinspired structural color nanocomposites with healable capability

This minireview summarizes the recent development of healable structural color nanocomposites from the perspective of the construction strategies.

Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays

While structural color materials have nonfading properties and contribute significantly to the sustainable development of pigments or dyes, they are plagued by low color saturation and limited color tunability. Here, we describe a new type of spherical colloidal photonic crystals (CPCs) prepared by a droplet-based microfluidic strategy, featuring enhanced color saturation and tunable structural colors. Methyl viologen (MV) functionalized SiO₂ colloids were synthesized and used for the preparation of CPCs in microdroplets. Because of the absorption of incoherently scattered light by MV, the ratio of peak-to-background amplitude in the reflectance spectra of CPCs is increased, leading to brilliant structural color with enhanced saturation. The lattice plane exposure of spherical CPCs depends on the refractive index contrast between the filling medium and SiO₂ building blocks, and this offers an alternative way to tune the structural color in a spherical CPC. Accordingly, a dynamic optical display was constructed, providing valuable insights to the future development of structural color-based sensors, surface coatings, or displays.

Amorphous Photonic Structures with Brilliant and Noniridescent Colors via Polymer-Assisted Colloidal Assembly

Efficient and large area fabrication of amorphous photonic crystals (APCs) with multicolor, angle independency, and fine resolution is always desired owing to their application in color displays, sensors, and pigments. Here, we report a polymer-assisted colloidal assembly (PACA) method to fabricate APCs with brilliant structural colors by the co-assembly of silica colloidal particles, polyvinylpyrrolidone (PVP), and carbon black (CB). PVP is the key to enable the amorphous aggregations of the particles, the uniform and noniridescent structural colors of the APCs. Moreover, multicolor and high-resolution patterns can be prepared through the mask-based brush printing with colloids-PVP-CB precursor solution as ink (named as APCs-ink). The developed printing method can be applied to various substrates with different roughness, curvature, and flexibility such as papers, metals, plastic films, stones, and even curved glasses. PACA is efficient and straightforward for the fabrication of APCs and high-resolution patterns with large area, low cost, and easy operation, which will facilitate their practical applications in the fields of color-related display, green painting, anticounterfeiting, and so on.

Characterization of Colloidal Amorphous Arrays Prepared by Uniaxial Pressure Application

We prepared a colloidal amorphous array by applying uniaxial pressure to a powder of monodispersed colloidal silica particles. Pellet-shaped samples were obtained that exhibit different structural colors depending on the diameter of the particles. We characterized the optical properties of the arrays by measuring the angle-dependent scattering spectrum wherein several spectral peaks were observed. The peak at the longest wavelength was caused by the short-range order of the particle arrangement. Interestingly, this peak exhibited a smaller shift in wavelength than that observed in similar samples prepared by several different methods. The other spectral peaks were thought to originate from Mie scattering, which produces a color when the diameter of the colloidal particles is appropriately chosen. Our results showed that uniaxial pressure application can be a suitable method to prepare structurally colored pigments with low angle dependence.