Liquid-Phase Electrochemical Scanning Electron Microscopy for In Situ Investigation of Lithium Dendrite Growth and Dissolution

Interfacial Engineering for Oriented Crystal Growth toward Dendrite-Free Zn Anode for Aqueous Zinc Metal Battery

Zn deposition with a surface-preferred (002) crystal plane has attracted extensive attention due to its inhibited dendrite growth and side reactions. However, the nucleation and growth of the Zn(002) crystal plane are closely related to the interfacial properties. Herein, oriented growth of Zn(002) crystal plane is realized on Ag-modified surface that is directly visualized by in situ atomic force microscopy. A solid solution HCP-Zn (~1.10 at. % solubility of Ag, 30 °C) is formed on the Ag coated Zn foil (Zn@Ag) and possesses the same crystal structure as Zn to reduce its nucleation barrier caused by their lattice mismatch. It merits oriented Zn deposition and corrosion-resistant surface, and presents long cycling stability in symmetric cells and full cells coupled with V2O5 cathode. This work provides insights into interfacial regulation of Zn anodes for high-performance aqueous zinc metal batteries.

Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications

Rechargeable batteries, typically represented by lithium-ion batteries, have taken a huge leap in energy density over the last two decades. However, they still face material/chemical challenges in ensuring safety and long service life at temperatures beyond the optimum range, primarily due to the chemical/electrochemical instabilities of conventional liquid electrolytes against aggressive electrode reactions and temperature variation. In this regard, a gel polymer electrolyte (GPE) with its liquid components immobilized and stabilized by a solid matrix, capable of retaining almost all the advantageous natures of the liquid electrolytes and circumventing the interfacial issues that exist in the all-solid-state electrolytes, is of great significance to realize rechargeable batteries with extended working temperature range. We begin this review with the main challenges faced in the development of GPEs, based on extensive literature research and our practical experience. Then, a significant section is dedicated to the requirements and design principles of GPEs for wide-temperature applications, with special attention paid to the feasibility, cost, and environmental impact. Next, the research progress of GPEs is thoroughly reviewed according to the strategies applied. In the end, we outline some prospects of GPEs related to innovations in material sciences, advanced characterizations, artificial intelligence, and environmental impact analysis, hoping to spark new research activities that ultimately bring us a step closer to realizing wide-temperature rechargeable batteries.

Ultralong Cycling and Safe Lithium-Sulfur Pouch Cells for Sustainable Energy Storage

While layered metal oxides remain the dominant cathode materials for the state-of-the-art lithium-ion batteries, conversion-type cathodes such as sulfur present unique opportunities in developing cheaper, safer, and more energy-dense next-generation battery technologies. There has been remarkable progress in advancing the laboratory scale lithium-sulfur (Li-S) coin cells to a high level of performance. However, the relevant strategies cannot be readily translated to practical cell formats such as pouch cells and even battery pack. Here these key technical challenges are addressed by molecular engineering of the Li metal for hydrophobicization, fluorination and thus favorable anode chemistry. The introduced tris(2,4-di-tert-butylphenyl) phosphite (TBP) and tetrabutylammonium fluoride (TBA+F-) as well as cellulose membrane by rolling enables the formation of a functional thin layer that eliminates the vulnerability of Li metal towards the already demanding environment required (1.55% relative humidity) for cell production and gives rise to LiF-rich solid electrolyte interphase (SEI) to suppress dendrite growth. As a result, Li-S pouch cells assembled at a pilot production line survive 400 full charge/discharge cycles with an average Coulombic efficiency of 99.55% and impressive rate performance of 1.5 C. A cell-level energy density of 417 Wh kg-1 and power density of 2766 W kg-1 are also delivered via multilayer Li-S pouch cell. The Li-S battery pack can even power an unmanned aerial vehicle of 3 kg for a fairly long flight time. This work represents a big step forward acceleration in Li-S battery marketization for future energy storage featuring improved safety, sustainability, higher energy density as well as reduced cost.

Interface Modifications of Lithium Metal Anode for Lithium Metal Batteries

Lithium metal batteries (LMBs) enable much higher energy density than lithium-ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which has been hindering LMBs from commercialization. To this end, extensive effort has been invested in understanding the underlying mechanisms theoretically and experimentally and developing technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMBs. We expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.

Recent Progress of Advanced Functional Separators in Lithium Metal Batteries

As a representative in the post-lithium-ion batteries (LIBs) landscape, lithium metal batteries (LMBs) exhibit high-energy densities but suffer from low coulombic efficiencies and short cycling lifetimes due to dendrite formation and complex side reactions. Separator modification holds the most promise in overcoming these challenges because it utilizes the original elements of LMBs. In this review, separators designed to address critical issues in LMBs that are fatal to their destiny according to the target electrodes are focused on. On the lithium anode side, functional separators reduce dendrite propagation with a conductive lithiophilic layer and a uniform Li-ion channel or form a stable solid electrolyte interphase layer through the continuous release of active agents. The classification of functional separators solving the degradation stemming from the cathodes, which has often been overlooked, is summarized. Structural deterioration and the resulting leakage from cathode materials are suppressed by acidic impurity scavenging, transition metal ion capture, and polysulfide shuttle effect inhibition from functional separators. Furthermore, flame-retardant separators for preventing LMB safety issues and multifunctional separators are discussed. Further expansion of functional separators can be effectively utilized in other types of batteries, indicating that intensive and extensive research on functional separators is expected to continue in LIBs.

Direct imaging of dynamic heterogeneous lithium-gold interaction at the electrochemical interface during the charging/discharging processes

Lithium can smoothly plate on certain lithium alloys in theory, such as the Li-Au alloy, making the alloy/metal films promising current collectors for high energy density anode-free batteries. However, the actual performance of the batteries with alloy film electrodes often rapidly deteriorates. It remains challenging for current imaging approaches to provide sufficient details for fully understanding the process. Here, a "see-through" operando optical microscopic approach that allows direct imaging of Li-Au interaction with high spatiotemporal and chemical resolution has been developed. Through this approach, a two-step Li-Au alloying process that exhibits interesting complementary spatiotemporal evolution paths has been discovered. The alloying process regulates the nucleation of further Li deposition, while the Li nucleation sites generate pores on the electrode film. After several cycles, film rupture occurs due to the generation of an increased number of pores, thus explaining the previously unclear mechanism of poor cycling stability. We have also elucidated the deterioration mechanism of silver electrodes: the growth of defect pores in size, independent of the alloying process. Overall, this new imaging approach opens up an effective and simple way to monitor the dynamic heterogeneity of metal-metal interaction at the electrochemical interface, which could provide helpful insight for designing high-performance batteries.

Recycling and Reusing of Graphite from Retired Lithium-ion Batteries: A Review

The proliferation of rechargeable lithium-ion batteries (LIBs) over the past decade has led to a significant increase in the number of electric vehicles (EVs) powered by these batteries reaching the end of their lifespan. With retired EVs becoming more prevalent, recycling and reusing their components, particularly graphite, has become imperative as the world transitions toward electric mobility. Graphite constitutes ≈20% of LIBs by weight, making it a valuable resource to be conserved. This review presents an in-depth analysis of the current global graphite mining landscape and explores potential opportunities for the "second life" of graphitefrom depleted LIBs. Various recycling and reactivation technologies in both industry and academia are discussed, along with potential applications for recycled graphite forming a vital aspect of the waste management hierarchy. Furthermore, this review addresses the future challenges faced by the recycling industry in dealing with expired LIBs, encompassing environmental, economic, legal, and regulatory considerations. In conclusion, this review provides a comprehensive overview of the developments in recycling and reusing graphite from retired LIBs, offering valuable insights for forthcoming large-scale recycling efforts.

Breaking the Barrier: Strategies for Mitigating Shuttle Effect in Lithium-Sulfur Batteries Using Advanced Separators

Lithium-sulfur (Li-S) batteries are considered one of the most promising energy storage systems due to their high theoretical capacity, high theoretical capacity density, and low cost. However, challenges such as poor conductivity of sulfur (S) elements in active materials, the "shuttle effect" caused by lithium polysulfide, and the growth of lithium dendrites impede the commercial development of Li-S batteries. As a crucial component of the battery, the separator plays a vital role in mitigating the shuttle effect caused by polysulfide. Traditional polypropylene, polyethylene, and polyimide separators are constrained by their inherent limitations, rendering them unsuitable for direct application in lithium-sulfur batteries. Therefore, there is an urgent need for the development of novel separators. This review summarizes the applications of different separator preparation methods and separator modification methods in lithium-sulfur batteries and analyzes their electrochemical performance.

Insights into the solvation chemistry in liquid electrolytes for lithium-based rechargeable batteries

Lithium-based rechargeable batteries have dominated the energy storage field and attracted considerable research interest due to their excellent electrochemical performance. As indispensable and ubiquitous components, electrolytes play a pivotal role in not only transporting lithium ions, but also expanding the electrochemical stable potential window, suppressing the side reactions, and manipulating the redox mechanism, all of which are closely associated with the behavior of solvation chemistry in electrolytes. Thus, comprehensively understanding the solvation chemistry in electrolytes is of significant importance. Here we critically reviewed the development of electrolytes in various lithium-based rechargeable batteries including lithium-metal batteries (LMBs), nonaqueous lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), lithium-oxygen batteries (LOBs), and aqueous lithium-ion batteries (ALIBs), and emphasized the effects of interactions between cations, anions, and solvents on solvation chemistry, and functions of solvation chemistry in different types of electrolytes (strong solvating electrolytes, moderate solvating electrolytes, and weak solvating electrolytes) on the electrochemical performance and redox mechanism in the abovementioned rechargeable batteries. Specifically, the significant effects of solvation chemistry on the stability of electrode-electrolyte interphases, suppression of lithium dendrites in LMBs, inhibition of the co-intercalation of solvents in LIBs, improvement of anodic stability at high cut-off voltages in LMBs, LIBs and ALIBs, regulation of redox pathways in LSBs and LOBs, and inhibition of hydrogen/oxygen evolution reactions in LOBs are thoroughly summarized. Finally, the review concludes with a prospective outlook, where practical issues of electrolytes, advanced in situ/operando techniques to illustrate the mechanism of solvation chemistry, and advanced theoretical calculation and simulation techniques such as "material knowledge informed machine learning" and "artificial intelligence (AI) + big data" driven strategies for high-performance electrolytes have been proposed.

Interfacial Liquid Water on Graphite, Graphene, and 2D Materials

The optical, electronic, and mechanical properties of graphite, few-layer, and two-dimensional (2D) materials have prompted a considerable number of applications. Biosensing, energy storage, and water desalination illustrate applications that require a molecular-scale understanding of the interfacial water structure on 2D materials. This review introduces the most recent experimental and theoretical advances on the structure of interfacial liquid water on graphite-like and 2D materials surfaces. On pristine conditions, atomic-scale resolution experiments revealed the existence of 1-3 hydration layers. Those layers were separated by ∼0.3 nm. The experimental data were supported by molecular dynamics simulations. However, under standard working conditions, atomic-scale resolution experiments revealed the presence of 2-3 hydrocarbon layers. Those layers were separated by ∼0.5 nm. Linear alkanes were the dominant molecular specie within the hydrocarbon layers. Paradoxically, the interface of an aged 2D material surface immersed in water does not have water molecules on its vicinity. Free-energy considerations favored the replacement of water by alkanes.

Liquid cell electrochemical TEM: Unveiling the real-time interfacial reactions of advanced Li-metal batteries

Li metal batteries (LMBs) reveal great application prospect in next-generation energy storage, because of their high energy density and low electrochemical potential, especially when paired with elemental sulfur and oxygen cathodes. Complex interfacial reactions have long been a big concern because of the elusive formation/dissolution of Li metal at the solid-electrolyte interface (SEI) layer, which leads to battery degradation under practical operating conditions. To precisely track the reactions at the electrode/electrolyte interfaces, in the past ten years, high spatio-temporal resolution, in situ electrochemical transmission electron microscopy (EC-TEM) has been developed. A preliminary understanding of the structural and chemical variation of Li metal during nucleation/growth and SEI layer formation has been obtained. In this perspective, we give a brief introduction of liquid cell development. Then, we comparably discuss the different configurations of EC-TEM based on open-cell and liquid-cell, and focus on the recent advances of liquid-cell EC-TEM and its investigation in the electrodes, electrolytes, and SEI. Finally, we present a perspective of liquid-cell EC-TEM for future LMB research.

Dynamic Investigation of Battery Materials via Advanced Visualization: From Particle, Electrode to Cell Level

Li-ion batteries, the most-popular secondary battery, are typically electrochemical systems controlled by ion-insertion dynamics. The battery dynamics involve mass transport, charge transfer, ion-electron coupled reactions, electrolyte penetration, ion solvation, and interfacial evolution. However, it is difficult for the traditional electrochemical methods to capture the accurate and individual details of the dynamic processes in "black box" batteries; instead, only the net result of multi-factors on the whole scale. Recently, different advanced visualization techniques have been developed, which provide powerful tools to track and monitor the internal real-time dynamic processes, giving intuitive details and fine information at various scales from crystal lattice, single particle, electrode to cell level. Here, the recent progress on the investigation of electrochemical dynamics in battery materials are reviewed, via developed techniques across wide timescales and space-scales, including the dynamic process inside the active particle, kinetics issues at the electrode/electrolyte interface, dynamic inhomogeneity in the electrode, and dynamic transportation at the cell level. Finally, the fundamental principles to improve the battery dynamics are summarized and new technologies for future more stringent conditions are highlighted. In prospect, this review opens sight on the battery interior for a clearer, deeper, and more thorough understanding of the dynamics.

Advances in Nanofibrous Materials for Stable Lithium-Metal Anodes

Lithium metal is regarded as the most potential anode material for improving the energy density of batteries due to its high specific capacity and low electrode potential. However, the practical application of lithium-metal anodes (LMAs) still faces severe challenges such as uncontrollable dendrites growth and large volume expansion. The development of functional nanomaterials has brought opportunities for the revival of LMAs. Among them, nanofibrous materials show great application potential for LMAs protection due to their distinct functional and structural features. Here, the latest research progress in nanofibrous materials for LMAs is systematically outlined. First, the problems existing in the practical application of LMAs are analyzed. Then, prospective strategies and recent research progress toward stable LMAs based on nanofibrous materials are summarized from the aspects of artificial protective layers, three-dimensional frameworks, separators, and solid-state electrolytes. Finally, the future development of nanofibrous materials for the protection of lithium-metal batteries is summarized and prospected. This review establishes a close connection between nanofibrous materials and LMA modification and provides insight for the development of high-safety lithium-metal batteries.

Toward Dendrite-Free Metallic Lithium Anodes: From Structural Design to Optimal Electrochemical Diffusion Kinetics

Lithium metal anodes are ideal for realizing high-energy-density batteries owing to their advantages, namely high capacity and low reduction potentials. However, the utilization of lithium anodes is restricted by the detrimental lithium dendrite formation, repeated formation and fracturing of the solid electrolyte interphase (SEI), and large volume expansion, resulting in severe "dead lithium" and subsequent short circuiting. Currently, the researches are principally focused on inhibition of dendrite formation toward extending and maintaining battery lifespans. Herein, we summarize the strategies employed in interfacial engineering and current-collector host designs as well as the emerging electrochemical catalytic methods for evolving-accelerating-ameliorating lithium ion/atom diffusion processes. First, strategies based on the fabrication of robust SEIs are reviewed from the aspects of compositional constituents including inorganic, organic, and hybrid SEI layers derived from electrolyte additives or artificial pretreatments. Second, the summary and discussion are presented for metallic and carbon-based three-dimensional current collectors serving as lithium hosts, including their functionality in decreasing local deposition current density and the effect of introducing lithiophilic sites. Third, we assess the recent advances in exploring alloy compounds and atomic metal catalysts to accelerate the lateral lithium ion/atom diffusion kinetics to average the spatial lithium distribution for smooth plating. Finally, the opportunities and challenges of metallic lithium anodes are presented, providing insights into the modulation of diffusion kinetics toward achieving dendrite-free lithium metal batteries.

Radiolysis-Driven Evolution of Gold Nanostructures - Model Verification by Scale Bridging In Situ Liquid-Phase Transmission Electron Microscopy and X-Ray Diffraction

Utilizing ionizing radiation for in situ studies in liquid media enables unique insights into nanostructure formation dynamics. As radiolysis interferes with observations, kinetic simulations are employed to understand and exploit beam-liquid interactions. By introducing an intuitive tool to simulate arbitrary kinetic models for radiation chemistry, it is demonstrated that these models provide a holistic understanding of reaction mechanisms. This is shown for irradiated HAuCl₄ solutions allowing for quantitative prediction and tailoring of redox processes in liquid-phase transmission electron microscopy (LP-TEM). Moreover, it is demonstrated that kinetic modeling of radiation chemistry is applicable to investigations utilizing X-rays such as X-ray diffraction (XRD). This emphasizes that beam-sample interactions must be considered during XRD in liquid media and shows that reaction kinetics do not provide a threshold dose rate for gold nucleation relevant to LP-TEM and XRD. Furthermore, it is unveiled that oxidative etching of gold nanoparticles depends on both, precursor concentration, and dose rate. This dependency is exploited to probe the electron beam-induced shift in Gibbs free energy landscape by analyzing critical radii of gold nanoparticles.

Effect of Mg Cation Diffusion Coefficient on Mg Dendrite Formation

Dendrite formation is an important issue for the metal anode-based battery system. The traditional perception that Mg metal anode does not grow dendrite during operation has been challenged recently. Herein, we investigate the Mg electrodeposition behavior in a 0.3 M all-phenyl-complex (APC) electrolyte and confirm that Mg dendrites are readily formed at high current densities. A semiquantitative model indicates that the Mg-ion concentration on the electrode surface, limited by the intrinsic diffusion coefficient of the Mg cation group, decreases with increasing current density, resulting in an extra concentration polarization. However, Mg deposition at the tip of a protrusion on the electrode surface is hardly affected by the concentration polarization, and thus dendrite growth is more prone to occur at the tips. We find that the addition of LiCl in conventional APC electrolytes can suppress the Mg dendrite formation, mainly as a result of the enhanced Mg cation diffusion coefficient due to the influence of the LiCl additive, rather than the less pronounced electrostatic shield effect provided by Li cations.

Engineering and characterization of interphases for lithium metal anodes

Lithium metal is a very promising anode material for achieving high energy density for next generation battery systems due to its low redox potential and high theoretical specific capacity of 3860 mA h g-1. However, dendrite formation and low coulombic efficiency during cycling greatly hindered its practical applications. The formation of a stable solid electrolyte interphase (SEI) on the lithium metal anode (LMA) holds the key to resolving these problems. A lot of techniques such as electrolyte modification, electrolyte additive introduction, and artificial SEI layer coating have been developed to form a stable SEI with capability to facilitate fast Li+ transportation and to suppress Li dendrite formation and undesired side reactions. It is well accepted that the chemical and physical properties of the SEI on the LMA are closely related to the kinetics of Li+ transport across the electrolyte-electrode interface and Li deposition behavior, which in turn affect the overall performance of the cell. Unfortunately, the chemical and structural complexity of the SEI makes it the least understood component of the battery cell. Recently various advanced in situ and ex situ characterization techniques have been developed to study the SEI and the results are quite interesting. Therefore, an overview about these new findings and development of SEI engineering and characterization is quite valuable to the battery research community. In this perspective, different strategies of SEI engineering are summarized, including electrolyte modification, electrolyte additive application, and artificial SEI construction. In addition, various advanced characterization techniques for investigating the SEI formation mechanism are discussed, including in situ visualization of the lithium deposition behavior, the quantification of inactive lithium, and using X-rays, neutrons and electrons as probing beams for both imaging and spectroscopy techniques with typical examples.

Progress in Solid Polymer Electrolytes for Lithium-Ion Batteries and Beyond

Solid-state polymer electrolytes (SPEs) for high electrochemical performance lithium-ion batteries have received considerable attention due to their unique characteristics; they are not prone to leakage, and they exhibit low flammability, excellent processability, good flexibility, high safety levels, and superior thermal stability. However, current SPEs are far from commercialization, mainly due to the low ionic conductivity, low Li⁺ transference number (t_Li+ ), poor electrode/electrolyte interface contact, narrow electrochemical oxidation window, and poor long-term stability of Li metal. Recent work on improving electrochemical performance and these aspects of SPEs are summarized systematically here with a particular focus on the underlying mechanisms, and the improvement strategies are also proposed. This review could lead to a deeper consideration of the issues and solutions affecting the application of SPEs and pave a new pathway to safe, high-performance lithium-ion batteries.

Remedies to Avoid Failure Mechanisms of Lithium-Metal Anode in Li-Ion Batteries

Rechargeable lithium-metal batteries (LMBs), which have high power and energy density, are very attractive to solve the intermittence problem of the energy supplied either by wind mills or solar plants or to power electric vehicles. However, two failure modes limit the commercial use of LMBs, i.e., dendrite growth at the surface of Li metal and side reactions with the electrolyte. Substantial research is being accomplished to mitigate these drawbacks. This article reviews the different strategies for fabricating safe LMBs, aiming to outperform lithium-ion batteries (LIBs). They include modification of the electrolyte (salt and solvents) to obtain a highly conductive solid–electrolyte interphase (SEI) layer, protection of the Li anode by in situ and ex situ coatings, use of three-dimensional porous skeletons, and anchoring Li on 3D current collectors.

In-Depth Mechanism Understanding for Potassium-Ion Batteries by Electroanalytical Methods and Advanced In Situ Characterization Techniques

The advancement of potassium ion batteries (PIBs) stimulated by the dearth of lithium resources is accelerating. Major progresses on the electrochemical properties are based on the optimization of electrode materials, electrolytes, and other components. More significantly, the prerequisites for optimizing these key compositions are in-depth and comprehensive exploration of electrochemical reaction processes, including the evolution of morphology and structure, phase transition, interface behaviors, and K⁺ movement, etc. As a result, the obtained K⁺ storage mechanism via analyzing aforementioned reaction processes sheds light on furthering practical application of PIBs. Typical electrochemical analysis methods are capable of obtaining physical and chemical characteristics. The advent of in situ electrochemical measurements enables dynamic observation and monitoring, thereby gaining extensive insights into the intricate mechanism of capacity degradation and interface kinetics. By coupling with these powerful electrochemical characterization techniques, inspiring works in PIBs will burgeon into wide realms of energy storage fields. In this review, some typical electroanalytical tests and in situ hyphenated measurements are described with the main concentration on how these techniques play a role in investigating the potassium storage mechanism for PIBs and achieving encouraging results.

Lithium-Sulfur Battery Cathode Design: Tailoring Metal-Based Nanostructures for Robust Polysulfide Adsorption and Catalytic Conversion

Lithium-sulfur (Li-S) batteries have a high specific energy capacity and density of 1675 mAh g^-1 and 2670 Wh kg^-1 , respectively, rendering them among the most promising successors for lithium-ion batteries. However, there are myriads of obstacles in the practical application and commercialization of Li-S batteries, including the low conductivity of sulfur and its discharge products (Li₂ S/Li₂ S₂ ), volume expansion of sulfur electrode, and the polysulfide shuttle effect. Hence, immense attention has been devoted to rectifying these issues, of which the application of metal-based compounds (i.e., transition metal, metal phosphides, sulfides, oxides, carbides, nitrides, phosphosulfides, MXenes, hydroxides, and metal-organic frameworks) as sulfur hosts is profiled as a fascinating strategy to hinder the polysulfide shuttle effect stemming from the polar-polar interactions between the metal compounds and polysulfides. This review encompasses the fundamental electrochemical principles of Li-S batteries and insights into the interactions between the metal-based compounds and the polysulfides, with emphasis on the intimate structure-activity relationship corroborated with theoretical calculations. Additionally, the integration of conductive carbon-based materials to ameliorate the existing adsorptive abilities of the metal-based compound is systematically discussed. Lastly, the challenges and prospects toward the smart design of catalysts for the future development of practical Li-S batteries are presented.

Versatile Printing of Substantial Liquid Cells for Efficiently Imaging In Situ Liquid-Phase Dynamics

Through its ability to image liquid-phase dynamics at nano/atomic-scale resolution, liquid-cell electron microscopy is essential for a wide range of applications, including wet-chemical synthesis, catalysis, and nanoparticle tracking, for which involved structural features are critical. However, statistical investigations by usual techniques remain challenging because of the difficulty in fabricating substantial liquid cells with appreciable efficiency. Here, we report a general approach for efficiently printing huge numbers of ready-to-use liquid cells (∼9000) within 30 s by electrospinning, with the unique feature of statistical liquid-phase studies requiring only one experimental time slot. Our solution efficiently resolves a complete transition picture of bubble evolution and also the induced nanoparticle motion. We statistically quantify the effect of the electron dose rate on the bubble variation and conclude that the bubble-driven nanoparticle motion is a ballistic-like behavior insignificant to morphological asymmetries. The versatile approach here is critical for statistical research, offering great opportunities in liquid-phase-associated dynamic studies.

Fast Li Plating Behavior Probed by X-ray Computed Tomography

Uneven lithium plating/stripping is an essential issue that inhibits stable cycling of a lithium metal anode and thus hinders its practical applications. The investigation of this process is challenging because it is difficult to observe lithium in an operating device. Here, we demonstrate that the microscopic lithium plating behavior can be observed in situ in a close-to-practical cell setup using X-ray computed tomography. The results reveal the formation of porous structure and its progressive evolution in space over the charging process with a large current. The elaborated analysis indicates that the microstructure of deposited lithium makes a significant impact on the subsequent lithium plating, and the impact of structural inhomogeneity, further exaggerated by the large-current charging, can lead to severely uneven lithium plating and eventually cell failure. Therefore, a codesign strategy involving delicate controls of microstructure and electrochemical conditions could be a necessity for the next-generation battery with lithium metal anode.

Functional separators towards the suppression of lithium dendrites for rechargeable high-energy batteries

Lithium metal battery (LMB) is considered to be one of the most promising electrochemical energy storage devices due to the high theoretical specific capacity and the lowest redox potential of metallic lithium; however, some key issues caused by lithium dendrites on the lithium metal anode seriously hinder its real-world applications. As an indispensable part of LMBs, the separator could serve as a physical barrier to prevent direct contact of the two electrodes and control ionic transport in batteries; it is an ideal platform for the suppression of lithium dendrites. In this review, the mechanism of lithium dendrite nucleation and growth are firstly discussed and then some advanced techniques are introduced for the precise characterization of lithium dendrites. On the basis of dendritic nucleation and growth principle, several feasible strategies are summarized for suppressing lithium dendrites by utilizing functional separators, including providing a mechanical barrier, promoting homogeneous lithium deposition, and regulating ionic transport. Finally, some challenges and prospects are proposed to clear the future development of functional separators. We anticipate that this paper will provide a new insight into the design and construction of functional separators for addressing the issues of lithium dendrites in high-energy batteries.

Recent advances in research on anodes for safe and efficient lithium-metal batteries

The revival of lithium metal anodes (LMAs) makes it a potent influence on the battery research community in the recent years after the popularity of Li-ion batteries with graphite anodes. The main reason is due to the over ten-fold increase in the capacity of LMAs when compared with that obtained when using graphite, as well as the low redox potential of Li/Li⁺. However, the full potential of LMAs is heavily inhibited by several factors, such as dendrite growth, pulverization, side reactions, and volume changes. These adversities lower the cell's Coulombic efficiency dramatically if operated without massively excessive Li usage. In this review, we first introduce some of the most significant progresses made in the understandings of the charging/discharging processes at the anode. The importance of combining advanced characterization techniques with classical methods is highlighted. In particular, we aim to explore the hidden links between those studies for obtaining deeper insights. Two main categories of solutions to address common problems, namely, lithium-electrolyte interfacial engineering and three-dimensional hosting of Li, are subsequently illustrated, where each subsection takes a different methodological perspective to demonstrate the relevant state-of-the-art studies. Some interesting approaches to stop dendrites and a brief note on the practical aspects of lithium-metal batteries are provided, too. This review concludes with our essential discoveries from the current literature and valuable suggestions for future LMA research.

Multi-Step Phase Transitions of Mn3 O4 During Galvanostatic Lithiation: An In Situ Transmission Electron Microscopic Investigation

For study of electrochemical reaction mechanisms at nanoscale, in situ electrochemical transmission electron microscopy (EC-TEM) exceeds many other methods due to its high temporal and spatial resolution. However, the limited amount of active materials used in previous in situ TEM studies prevents the model EC cells to operate in the constant-current (galvanostatic) charge/discharge mode that is required for accurate control of electrochemical processes. Herein, a new in situ EC-TEM technique is developed to investigate multi-step phase transitions of Mn₃ O₄ electrodes under the galvanostatic charge/discharge mode and constant-voltage discharge mode. In galvanostatic mode, the lithiation of Mn₃ O₄ undergoes multi-step phase transitions following a reaction pathway of Mn₃ O₄ + Li⁺ → LiMn₃ O₄ + Li⁺ → MnO + Li₂ O → Mn + Li₂ O. It is also found that lithium ions prefer to enter Mn₃ O₄ along the {101} direction to form LiMn₃ O₄ with the help of transitional boundary phase of Li_x Mn₃ O₄ . These results are in sharp contrast to that obtained under a constant-voltage discharge mode, where only a single-step lithiation process of Mn₃ O₄ + Li⁺ → Mn + Li₂ O is observed.

High-Efficiency Lithium Metal Anode Enabled by a Concentrated/Fluorinated Ester Electrolyte

Lithium (Li) metal anode (LMA) has received growing attention due to its highest theoretical capacity (3860 mA h g^-1) and lowest redox potential (-3.04 V versus standard hydrogen electrode). However, practical application of LMA is obstructed by the detrimental side reactions between Li metal and organic electrolytes, especially when cycled in traditional carbonate ester electrolytes. Herein, we propose a novel fluorinated carbonate ester-based electrolyte by combining diethyl fluorocarbonate (ETFEC) solvent and 5 M LiFSI concentration (M = mol L^-1). Using this electrolyte, an ultrahigh Li plating/stripping Coulombic efficiency (CE) of 99.1% can be obtained in Li||Cu cells and a stable cycle performance of Li||LiFePO₄ is achieved under the conditions of limited Li metal (5 mA h cm^-2), moderate loading LiFePO₄ (7-8 mg cm^-2), and lean electrolyte (40 uL). The fundamental functioning mechanism of this novel electrolyte has been carefully investigated by scanning electronic microscopy (SEM), operando optical microscopy (OM), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), and solid state nuclear magnetic resonance (SS-NMR). The results demonstrate that this optimized electrolyte facilitates formation of a high Li⁺ conductive SEI layer enriched with LiF and inorganic sulfur-containing species, which can effectively suppress the side reactions between electrolyte and Li metal and prevent formation of dead Li.

Revealing the Active Phase of Copper during the Electroreduction of CO2 in Aqueous Electrolyte by Correlating In Situ X-ray Spectroscopy and In Situ Electron Microscopy

The variation in the morphology and electronic structure of copper during the electroreduction of CO₂ into valuable hydrocarbons and alcohols was revealed by combining in situ surface- and bulk-sensitive X-ray spectroscopies with electrochemical scanning electron microscopy. These experiments proved that the electrified interface surface and near-surface are dominated by reduced copper. The selectivity to the formation of the key C-C bond is enhanced at higher cathodic potentials as a consequence of increased copper metallicity. In addition, the reduction of the copper oxide electrode and oxygen loss in the lattice reconstructs the electrode to yield a rougher surface with more uncoordinated sites, which controls the dissociation barrier of water and CO₂. Thus, according to these results, copper oxide species can only be stabilized kinetically under CO₂ reduction reaction conditions.

Recent Progress of In Situ Transmission Electron Microscopy for Energy Materials

In situ transmission electron microscopy (TEM) is one of the most powerful approaches for revealing physical and chemical process dynamics at atomic resolutions. The most recent developments for in situ TEM techniques are summarized; in particular, how they enable visualization of various events, measure properties, and solve problems in the field of energy by revealing detailed mechanisms at the nanoscale. Related applications include rechargeable batteries such as Li-ion, Na-ion, Li-O₂ , Na-O₂ , Li-S, etc., fuel cells, thermoelectrics, photovoltaics, and photocatalysis. To promote various applications, the methods of introducing the in situ stimuli of heating, cooling, electrical biasing, light illumination, and liquid and gas environments are discussed. The progress of recent in situ TEM in energy applications should inspire future research on new energy materials in diverse energy-related areas.

Solid/Solid Interfacial Architecturing of Solid Polymer Electrolyte-Based All-Solid-State Lithium-Sulfur Batteries by Atomic Layer Deposition

Solid polymer electrolytes (SPEs)-based all-solid-state lithium-sulfur batteries (ASSLSBs) have attracted extensive research attention due to their high energy density and safe operation, which provide potential solutions to the increasing need for harnessing higher energy densities. There is little progress made, however, in the development of ASSLSBs to improve simultaneously energy density and long-term cycling life, mostly due to the "shuttle effect" of lithium polysulfide intermediates in the SPEs and the low interfacial compatibility between the metal lithium anode and the SPE. In this work, the issues of solid/solid interfacial architecturing through atomic layer deposition of Al₂ O₃ on poly(ethylene oxide)-lithium bis(trifluoromethanesulfonyl)imide SPE surface are effectively addressed. The Al₂ O₃ coating promotes the suppression of lithium dendrite formation for over 500 h. ASSLSBs fabricated with two layers of Al₂ O₃ -coated SPE deliver high gravimetric/areal capacity and Coulombic efficiency, as well as excellent cycling stability and extremely low self-discharge rate. This work provides not only a simple and effective approach to boost the electrochemical performances of SPE-based ASSLSBs, but also enriches the fundamental understanding regarding the underlying mechanism responsible for their performance.

Li Alginate-Based Artificial SEI Layer for Stable Lithium Metal Anodes

Lithium metal anodes (LMAs) are critical for high-energy-density batteries such as Li-S and Li-O₂ batteries. The spontaneously formed solid electrolyte interface on LMAs is fragile, which may not accommodate the cyclic Li plating/stripping. This usually will result in a low coulombic efficiency (CE), short cycle life, and potential safety hazards induced by the uncontrollable growth of lithium dendrites. In this study, we fabricate a Li alginate-based artificial SEI (ASEI) layer that is chemically stable and allows easy Li ion transport on the surface of LMAs, thus enabling the stable operation of lithium metal anodes. Compared to bare LMAs, the ASEI layer-protected LMAs exhibit a more stable Li plating/stripping behavior and present effective dendrite suppression. The symmetric Li∥Li cells with the ASEI layer-protected LMAs can stably run for 850 and 350 h at current densities of 0.5 and 1 mA cm^-2, respectively. Additionally, the LiFePO₄∥Li full cell with the ASEI layer-protected LMA exhibits a capacity retention of about 94.0% coupled with a CE of 99.6% after 1000 cycles at 4 C. We believe that this study of engineering an ASEI brings a new and promising approach to the stabilization of LMAs for high-performance lithium metal batteries.

Review of Recent Development of In Situ/Operando Characterization Techniques for Lithium Battery Research

The increasing demands of energy storage require the significant improvement of current Li-ion battery electrode materials and the development of advanced electrode materials. Thus, it is necessary to gain an in-depth understanding of the reaction processes, degradation mechanism, and thermal decomposition mechanisms under realistic operation conditions. This understanding can be obtained by in situ/operando characterization techniques, which provide information on the structure evolution, redox mechanism, solid-electrolyte interphase (SEI) formation, side reactions, and Li-ion transport properties under operating conditions. Here, the recent developments in the in situ/operando techniques employed for the investigation of the structural stability, dynamic properties, chemical environment changes, and morphological evolution are described and summarized. The experimental approaches reviewed here include X-ray, electron, neutron, optical, and scanning probes. The experimental methods and operating principles, especially the in situ cell designs, are described in detail. Representative studies of the in situ/operando techniques are summarized, and finally the major current challenges and future opportunities are discussed. Several important battery challenges are likely to benefit from these in situ/operando techniques, including the inhomogeneous reactions of high-energy-density cathodes, the development of safe and reversible Li metal plating, and the development of stable SEI.

Silver Nanoparticle-Doped 3D Porous Carbon Nanofibers as Separator Coating for Stable Lithium Metal Anodes

The ever-increasing demand for electric devices and vehicles prompts the fast development of energy storage systems. Lithium metal is thought to be the most promising electrode for high-performance batteries. However, the growth of lithium dendrites impedes the industrial production of lithium metal batteries. Herein, an effective approach is proposed by coating a commercial separator with three-dimensional porous carbon fibers loaded with silver nanoparticles (Ag-PCNFs), which can be regarded as a subsidiary of the electrode to improve the cycling performance of lithium metal batteries. The porous structure with a high specific surface area endows the electrode with a high lithium-loading capacity. The silver nanoparticles provide the electrode pro-Li property and excellent electrical conductivity, which are beneficial for the electrochemical reaction and reduce the local current density to attain a dendrite-free electrode. Electrochemical cycling performance of symmetric Li-Li batteries shows that Ag-PCNF coating can hinder dendrite growth and enhance the cycling stability, indicating that Ag-PCNFs acting as host materials can effectively guide the deposition of Li and solve the dendrite problem.

Dendrite-Free Epitaxial Growth of Lithium Metal during Charging in Li-O2 Batteries

Lithium (Li) dendrite formation is one of the major hurdles limiting the development of Li-metal batteries, including Li-O₂ batteries. Herein, we report the first observation of the dendrite-free epitaxial growth of a Li metal up to 10-μm thick during charging (plating) in the LiBr-LiNO₃ dual anion electrolyte under O₂ atmosphere. This phenomenon is due to the formation of an ultrathin and homogeneous Li₂ O-rich solid-electrolyte interphase (SEI) layer in the preceding discharge (stripping) process, where the corrosive nature of Br^- seems to give rise to remove the original incompact passivation layer and NO₃^- oxidizes (passivates) the freshly formed Li surface to prevent further reactions with the electrolyte. Such reactions keep the SEI thin (<100 nm) and facilitates the electropolishing effect and gets ready for the epitaxial electroplating of Li in the following charge process.

Lithium Silicide Surface Enrichment: A Solution to Lithium Metal Battery

The propensity of lithium dendrite formation during the charging process of lithium metal batteries is linked to inhomogeneity on the lithium surface layer. The high reactivity of lithium and the complex surface structure of the native layer create "hot spots" for fast dendritic growth. Here, it is demonstrated that a fundamental restructuring of the lithium surface in the form of lithium silicide (Lix Si) can effectively eliminate the surface inhomogeneity on the lithium surface. In situ optical microscopic study is carried out to monitor the electrochemical deposition of lithium on the Lix Si-modified lithium electrodes and the bare lithium electrode. It is observed that a much more uniform lithium dissolution/deposition on the Lix Si-modified lithium anode can be achieved as compared to the bare lithium electrode. Full cells paring the modified lithium anode with sulfur and LiFePO4 cathodes show excellent electrochemical performances in terms of rate capability and cycle stability. Compatibility of the anode enrichment method with mass production process also offers a practical way for enabling lithium metal anode for next-generation lithium batteries.

Hierarchically Bicontinuous Porous Copper as Advanced 3D Skeleton for Stable Lithium Storage

Rechargeable lithium metal anodes (LMAs) with long cycling life have been regarded as the "Holy Grail" for high-energy-density lithium metal secondary batteries. The skeleton plays an important role in determining the performance of LMAs. Commercially available copper foam (CF) is not normally regarded as a suitable skeleton for stable lithium storage owing to its relatively inappropriate large pore size and relatively low specific surface area. Herein, for the first time, we revisit CF and address these issues by rationally designing a highly porous copper (HPC) architecture grown on CF substrates (HPC/CF) as a three-dimensional (3D) hierarchically bicontinuous porous skeleton through a novel approach combining the self-assembly of polystyrene microspheres, electrodeposition of copper, and a thermal annealing treatment. Compared to the CF skeleton, the HPC/CF skeleton exhibits a significantly improved Li plating/stripping behavior with high Coulombic efficiency (CE) and superior Li dendrite growth suppression. The 3D HPC/CF-based LMAs can run for 620 h without short-circuiting in a symmetric Li/Li@Cu cell at 0.5 mA cm^-2, and the Li@Cu/LiFePO₄ full cell exhibits a high reversible capacity of 115 mAh g^-1 with a high CE of 99.7% at 2 C for 500 cycles. These results demonstrate the effectiveness of the design strategy of 3D hierarchically bicontinuous porous skeletons for developing stable and safe LMAs.

Developing High-Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress

Lithium metal anodes are potentially key for next-generation energy-dense batteries because of the extremely high capacity and the ultralow redox potential. However, notorious safety concerns of Li metal in liquid electrolytes have significantly retarded its commercialization: on one hand, lithium metal morphological instabilities (LMI) can cause cell shorting and even explosion; on the other hand, breaking of the grown Li arms induces the so-called "dead Li"; furthermore, the continuous consumption of the liquid electrolyte and cycleable lithium also shortens cell life. The research community has been seeking new strategies to protect Li metal anodes and significant progress has been made in the last decade. Here, an overview of the fundamental understandings of solid electrolyte interphase (SEI) formation, conceptual models, and advanced real-time characterizations of LMI are presented. Instructed by the conceptual models, strategies including increasing the donatable fluorine concentration (DFC) in liquid to enrich LiF component in SEI, increasing salt concentration (ionic strength) and sacrificial electrolyte additives, building artificial SEI to boost self-healing of natural SEI, and 3D electrode frameworks to reduce current density and delay Sand's extinction are summarized. Practical challenges in competing with graphite and silicon anodes are outlined.

Control of Growth Front Evolution by Bi Additives during ZnAu Electrodeposition

The performance of many electrochemical energy storage systems can be compromised by the formation of metal dendrites during charging. Additives in the electrolyte represent a useful strategy to mitigate dendrite formation, but understanding the mechanisms involved requires knowledge of the nanoscale effects of additives during electrochemical deposition. Here we quantify the effects of an inorganic additive on the morphology of an evolving electrochemical growth front, using liquid cell electron microscopy to provide the necessary spatial and temporal resolution. We examine deposition of ZnAu on Au in the presence of Bi additive, and show that low concentrations of Bi delay but do not prevent the formation of growth front instabilities. We describe a model in which Bi segregates at the growth front and promotes the surface diffusion and relaxation of Zn, allowing better coverage of the initial Au electrode surface. A more precise knowledge of the mechanism of inorganic additive effects may help in designing electrolyte chemistry for battery and other applications where morphology control is essential.

In situ atomic force microscopy study of nano–micro sodium deposition in ester-based electrolytes

This communication reports an in situ atomic force microscopy study of sodium deposition and the effect of additives in an ester-based electrolyte.

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

To exploit the high energy density of the lithium (Li) metal battery, it is imperative to address the dendrite growth and interface instability of the anode. 3D hosts for Li metal are expected to suppress the growth of Li dendrites. Heterogeneous seeds are effective in guiding Li deposition and realizing spatial control over Li nucleation. Herein, this study shows that ultrafine silver (Ag) nanoparticles, which are synthesized via a novel rapid Joule heating method, can serve as nanoseeds to direct the deposition of Li within the 3D host materials, resolving the problems of the Li metal anode. By optimizing the Joule heating method, ultrafine Ag nanoparticles (≈40 nm) are homogeneously anchored on carbon nanofibers. The Ag nanoseeds effectively reduce the nucleation overpotential of Li and guide the Li deposition in the 3D carbon matrix uniformly, free from the dendrites. A stable and reversible Li metal anode is achieved in virtue of the Ag nanoseeds in the 3D substrate, showing a low overpotential (≈0.025 V) for a long cycle life. The ultrafine nanoseeds achieved by rapid Joule heating render uniform deposition of Li metal anode in 3D hosts, promising a safe and long-life Li metal battery for high-energy applications.

Reviving Lithium-Metal Anodes for Next-Generation High-Energy Batteries

Lithium-metal batteries (LMBs), as one of the most promising next-generation high-energy-density storage devices, are able to meet the rigid demands of new industries. However, the direct utilization of metallic lithium can induce harsh safety issues, inferior rate and cycle performance, or anode pulverization inside the cells. These drawbacks severely hinder the commercialization of LMBs. Here, an up-to-date review of the behavior of lithium ions upon deposition/dissolution, and the failure mechanisms of lithium-metal anodes is presented. It has been shown that the primary causes consist of the growth of lithium dendrites due to large polarization and a strong electric field at the vicinity of the anode, the hyperactivity of metallic lithium, and hostless infinite volume changes upon cycling. The recent advances in liquid organic electrolyte (LOE) systems through modulating the local current density, anion depletion, lithium flux, the anode-electrolyte interface, or the mechanical strength of the interlayers are highlighted. Concrete strategies including tailoring the anode structures, optimizing the electrolytes, building artificial anode-electrolyte interfaces, and functionalizing the protective interlayers are summarized in detail. Furthermore, the challenges remaining in LOE systems are outlined, and the future perspectives of introducing solid-state electrolytes to radically address safety issues are presented.