Au Sub-Nanoclusters on TiO2 toward Highly Efficient and Selective Electrocatalyst for N2 Conversion to NH3 at Ambient Conditions

Electrocatalytic Nitrogen Reduction to Ammonia Using TiO2-Supported Cu4Cl4(PPh3)4 and Ag4Cl4(PPh3)4 Nanoclusters

The electrocatalytic nitrogen reduction reaction (ENRR) offers a sustainable and promising approach for synthesizing ammonia under ambient conditions, providing an alternative to conventional industrial processes. However, challenges such as the inherent inertness of N2 and the competing hydrogen evolution reaction (HER) in aqueous electrolytes hinder ammonia yield and Faradaic efficiencies. This research use TiO2-supported Cu4Cl4(PPh3)4 and Ag4Cl4(PPh3)4 nanoclusters (NCs) with quasi-cubic M4Cl4 cores (M = Ag or Cu) for ENRR investigations. The results reveal that TiO2-supported Cu4Cl4(PPh3)4 NCs achieved an ammonia yield of 4.25 μg·h-1·cm-2 with a Faradaic efficiency (FE) of 53.0% at -0.9 V vs RHE. In contrast, TiO2-supported Ag4Cl4(PPh3)4 NCs produced a yield of 3.60 μg·h-1·cm-2 and an FE of 51.39% at -0.8 V vs RHE. Both NCs on the TiO2 support demonstrated superior performance compared to their unsupported counterparts, underscoring the critical role of TiO2 in improving electron transfer and fostering synergistic effects, thereby boosting catalytic activity. This research offers important insights into the design of supported NCs as high-performance catalysts, advancing the development of environmentally sustainable and energy-efficient approaches for ammonia production.

Ternary Heteroatom-Doped Carbon As a High-Performance Metal-Free Catalyst for Electrochemical Ammonia Synthesis

The electrochemical nitrogen reduction reaction (NRR) has garnered much attention, but the major challenge remains with efficient electrocatalysts. Metal-free carbonaceous materials, doped with heteroatoms and structural defects, present a promising alternative to metal-based catalysts. This study introduces a novel strategic stepwise synthesis strategy of defective nitrogen-doped carbon material, further doped with secondary heteroatoms boron and fluorine (FBDG). These secondary atoms in combination create additional active sites for nitrogen adsorption and activation and suppress the hydrogen evolution reaction (HER). The synergistic effect of three heteroatoms and induced defects in the catalyst enhances electron-donor behavior, improving π bonding within the carbon framework and facilitating the electron transfer processes during NRR, resulting in a significantly high Faradaic efficiency of 38.1% in the case of metal-free electrocatalysts. The theoretical calculation reveals that FBDG possesses a sufficient charge density to reduce nitrogen at a low overpotential following an alternating free energy pathway. The reaction intermediates are thereby identified by in situ ATR-FTIR studies. For the rapid screening of ammonia, we used a rotating ring disk system (RRDE) and did a kinetic study. The high efficiency, stability, and cost-effectiveness of FBDG position it as a strong contender for sustainable ammonia production and pave the way for future advancements in NRR.

Engineering Flow-Through Hollow Fiber Gas-Diffusion Electrodes for Unlocking High-Rate Gas-Phase Electrochemical Conversion

Designing advanced electrodes with efficient contact with gas, electrolytes, and catalysts presents significant opportunities to enhance the accessibility of concentrated gas molecules to the catalytic sites while mitigating undesirable side reactions such as the hydrogen evolution reaction (HER), which advances the gas-phase electrochemical reduction toward industrial-scale applications. Traditional planar electrodes face challenges, including limited gas solubility and restricted mass transport. Although commercial flow-by gas-diffusion electrodes can reduce mass transfer resistance by enabling direct diffusion of gas molecules to active sites, the reliance on diffusive gas flow becomes insufficient to meet the rapid consumption demands of gas reactants at high current density. Flow-through hollow fiber gas-diffusion electrodes (HFGDEs) or hollow fiber gas penetration electrodes (HFGPEs) provide a promising solution by continuously delivering convective gas flow to active sites, resulting in enhanced mass transport and superior gas accessibility near the catalytic sites. Notably, HFGDEs have demonstrated the ability to achieve current densities exceeding multiple amperes per square centimeter in liquid electrolytes. This review provides a comprehensive overview of the design criteria, fabrication methods, and design strategies for porous metallic HFGDEs. It highlights the state-of-the-art advancements in HFGDEs composed of various metals (e.g., Cu, Ni, Ag, Bi, Ti, and Zn), with a particular focus on their utilization in the electrochemical conversion of CO2. Finally, future research directions are discussed, underscoring the potential of porous metallic HFGDEs as a versatile and scalable electrode architecture for diverse electrochemical applications.

Engineering MXene Surface via Oxygen Functionalization and Au Nanoparticle Deposition for Enhanced Electrocatalytic Hydrogen Evolution Reaction

MXene, a family of 2D transition metal carbides and nitrides, presents promising applications in electrocatalysis. Maximizing its large surface area is key to developing efficient non-noble-metal catalysts for the hydrogen evolution reaction (HER). In this study, oxygen-functionalized Ti3C2Tx MXene (Ti3C2Ox) is synthesized and deposited gold nanoparticles (Au NPs) onto it, forming a novel composite material, Au-Ti3C2Ox. By selectively removing other functional groups, mainly -O functional groups are retained on the surface, directing electron transfer from Au NPs to MXene due to electronic metal-support interaction (EMSI), thereby improving the catalytic activity of the MXene surface. Additionally, the interaction between Au NPs and -O functional groups further enhanced the overall catalytic activity, achieving an overpotential of 62 mV and a Tafel slope of 40.1 mV dec-1 at a current density of -10 mA cm-2 in 0.5 m H2SO4 solution. Density functional theory calculations and scanning electrochemical microscopy with ≤150 nm resolution confirmed the enhanced catalytic efficiency due to the specific interaction between Au NPs and Ti3C2Ox. This work provides a surface modification strategy to fully utilize the MXene surface and enhance the overall catalytic activity of MXene-based catalysts.

Exploration of Multidimensional Structural Optimization and Regulation Mechanisms: Catalysts and Reaction Environments in Electrochemical Ammonia Synthesis

Ammonia (NH3) is esteemed for its attributes as a carbon-neutral fuel and hydrogen storage material, due to its high energy density, abundant hydrogen content, and notably higher liquefaction temperature in comparison to hydrogen gas. The primary method for the synthetic generation of NH3 is the Haber-Bosch process, involving rigorous conditions and resulting in significant global energy consumption and carbon dioxide emissions. To tackle energy and environmental challenges, the exploration of innovative green and sustainable technologies for NH3 synthesis is imperative. Rapid advances in electrochemical technology have created fresh prospects for researchers in the realm of environmentally friendly NH3 synthesis. Nevertheless, the intricate intermediate products and sluggish kinetics in the reactions impede the progress of green electrochemical NH3 synthesis (EAS) technologies. To improve the activity and selectivity of the EAS, which encompasses the electrocatalytic reduction of nitrogen gas, nitrate, and nitric oxide, numerous electrocatalysts and design strategies have been meticulously investigated. Here, this review primarily delves into recent progress and obstacles in EAS pathways, examining methods to boost the yield rate and current efficiency of NH3 synthesis via multidimensional structural optimization, while also exploring the challenges and outlook for EAS.

Active Photonic Glass for Hydrogen Generation

Chirality is vital in many living species since it is responsible for structural iridescent coloration and plays a key role in light harvesting during natural photosynthesis. Developing photoactive materials with such chiral structures is a challenging but promising strategy for energy applications. Here, we present a straightforward method to establish an active photonic glass obtained through the co-condensation of tetramethyl orthosilicate (TMOS) and titanium diisopropoxide bis(acetylacetonate) (TAA) dissolved in a liquid crystal formed from cellulose nanocrystalline (CNC). The inorganic glass maintains a long range of chiral nematic ordering, displaying iridescent colors characterized by a Bragg peak reflection. The reflected wavelengths are tuned all over the UV-visible range, demonstrating that the replica of the chiral nematic structure generates photonic properties. Incorporation of gold nanoparticles (Au NPs) into the films is further performed by impregnation/chemical reduction. We show that the charge carrier density and photocatalytic H2 generation were amplified when the photonic band gap edges matched the absorbance of the TiO2 and localized surface plasmon resonance (LSPR) of AuNPs. This photocatalytic glass with chiral nematic ordering and a tunable photonic bandgap paves the way for the development of metamaterials with new applications, such as asymmetric photocatalysis.

Research Progress on Ni-Based Electrocatalysts for the Electrochemical Reduction of Nitrogen to Ammonia

The electrochemical nitrogen reduction reaction (NRR) to synthesize ammonia (NH3) is considered as a promising method due to its approvable advantages of zero-pollution emission, feasible reaction proceedings, good safety and easy management. The multiple efforts have been devoted to the exploration of earth-abundant-element-based nanomaterials as high-efficiency electrocatalysts for realizing their industrial applications. Among these, the Ni-based nanomaterials is prioritized as an attractive non-noble-metal electrocatalysts for catalyzing NRR because they are earth-abundance and exceedingly easy to synthesize as well as also delivers the potential of high electrocatalytic activity and durability. In this review, after briefly elucidating the underlying mechanisms of NRR during the electrochemical process, we systematically sum up the recent research progress in representative Ni-based electrocatalysts, including monometallic Ni-based nanomaterials, bimetallic Ni-based nanomaterials, polymetallic Ni-based nanomaterials, etc. In particular, we discuss the effects of physicochemical properties, such as phases, crystallinity, morphology, composition, defects, heteroatom doping, and strain engineering, on the comprehensive performance of the abovementioned electrocatalysts, with the aim of establishing the nanostructure-function relationships of the electrocatalysts. In addition, the promising directions of Ni-based electrocatalysts for NRR are also pointed out and highlighted. The generic approach in this review may expand the frontiers of NRR and provides the inspiration for developing high-efficiently Ni-based electrocatalysts.

Investigation of a Single Atom Iron Catalyst for the Electrocatalytic Reduction of Nitric Oxide to Hydroxylamine: A DFT Study

Hydroxylamine, as an important reducing agent, disinfectant, foaming agent, and biocide, plays a role in both human life and industrial production. However, its synthesis is confronted with challenges, such as high pollution and large consumption. Here, we propose a coordination tailoring strategy to design 47 graphene-supported single iron atom catalysts (SACs), namely, Fe@CxZy (Z = B, N, O, P, and S), for the reduction of nitric oxide to hydroxylamine. Using density functional theory calculations, we demonstrated the great impact of the coordination environment on the stability, catalytic selectivity, and activity of the Fe site. We identified that the experimentally available Fe@N4 possesses an ultralow theoretical limiting potential of -0.32 V compared to that of other catalysts. A comprehensive investigation of the electronic properties elucidates the underlying active origin and reaction mechanism of the nitric oxide reduction reaction to hydroxylamine on Fe@N4. These results not only explain the catalytic origin of synthesized SACs for the NH2OH production but also offer theoretical guidance for further optimizing high-performance catalysts.

Machine Learning-Enhanced Screening of Single-Atom Alloy Clusters for Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (eNRR) under ambient conditions is a promising method to generate ammonia (NH3), a crucial precursor for fertilizers and chemicals, without carbon emissions. Single-atom alloy catalysts (SAACs) have reinvigorated catalytic processes due to their high activity, selectivity, and efficient use of active atoms. Here, we employed density functional theory (DFT) calculations integrated with machine learning (ML) to investigate dodecahedral nanocluster-based SAACs for analyzing structure-activity relationships in eNRR. Over 300 nanocluster-based SAACs were screened with all the transition metals as dopants to develop an ML model predicting stability and catalytic performance. Facet sites were identified as optimal doping positions, particularly with late group transition metals showing superior stability and activity. Utilizing DFT+ML, we identified 8 highly suitable SAACs for eNRR. Interestingly, the number of valence d-electrons in dopants proved crucial in screening for eNRR activity. These catalysts exhibited low activity in hydrogen evolution reaction, further enhancing their suitability for eNRR. This successful ML-driven approach accelerates catalyst design and discovery, holding significant practical implications.

Theoretical study of a CuCo dual-atom catalyst for nitrogen fixation

Developing low-cost catalysts for highly efficient nitrogen reduction reaction (NRR) in industrial applications is a great challenge. Dual-atom catalysts (DACs) have also aroused scientific interest as potential NRR catalysts due to their possible higher activity and atom utilization than single atom catalysts. Using density functional theory, we have investigated the NRR performances of heteronuclear CuCo DACs with different coordination configurations. Comparisons with the possible Cu or Co SACs and homonuclear dual-atom catalysts for the NRR performance were also made. We find that O-CuCo-N DAC has superior NRR performance, where the NRR easily takes place through the alternating pathway from the side-on N2 adsorption mode and the potential limiting step is the first hydrogenation step (*NN* → *NHN*) with a Gibbs free energy change of 0.55 eV. The good activity of O-CuCo-N DAC benefits from the regulation provided by Cu and the coordination environment. In addition, O-CuCo-N DAC also exhibits good selectivity and durability.

Construction of Fe3O4@Au catalysts via the surface functional group effect of ferric oxide for efficient electrocatalytic nitrite reduction

Surface modification is one of the effective strategies to control the morphology and electrocatalytic performance of noble metal/transition metal oxide matrix composite catalysts. In this work, we successfully introduced modification groups such as -NH2, -COOH, and -SH on the surface of Fe3O4 using the hydrothermal method. It was found that when the modification group -COOH was introduced, the regular spherical morphology of Fe3O4 was still maintained in Fe3O4-COOH, while Fe3O4-COOH had a relatively smaller spherical particle size (≈155.9 nm). Due to its smaller particle size, Fe3O4-COOH has a larger active area than Fe3O4, exposing more active sites. The abundant active sites in Fe3O4-COOH provide more nucleation and growth sites for Au particles, which is beneficial for the recombination between Fe3O4-COOH and Au. In addition, the experimental results of exploring the effect of Au precursor dosage on the synthesis of the Fe3O4-COOH@Au structure and performance show that the synthesized Fe3O4-COOH@Au1.0 catalyst has higher electrocatalytic activity. Due to the larger electrochemically active surface area of the Fe3O4-COOH@Au1.0 catalyst compared to those of Fe3O4-COOH@Au0.5 and Fe3O4-COOH@Au1.5 catalysts, the adsorption and activation of NO2- reactants were accelerated, thereby improving the electrocatalytic performance. Therefore, owing to the morphological and structural characteristics of Fe3O4-COOH combined with the high activity of Au nanoparticles, the synthesized Fe3O4-COOH@Au exhibits effective electrocatalytic activity in the electrocatalytic NO2-RR synthesis of ammonia. At a voltage of -0.8 V (vs. RHE), the ammonia yield reached 2092.8 μg h-1 mgcat-1 and Faraday efficiency reached 81.2%. The findings of this work will enrich our understanding of the construction of efficient Fe3O4@Au catalysts based on surface functionalization and help to design efficient electrocatalytic NO2-RR catalysts for practical applications.

Advancing electrochemical nitrogen reduction: Efficacy of two-dimensional SiP layered structures with single-atom transition metal catalysts

Researchers are interested in single-atom catalysts with atomically scattered metals relishing the enhanced electrocatalytic activity for nitrogen reduction and 100 % metal atom utilization. In this paper, we investigated 18 transition metals (TM) spanning 3d to 5d series as efficient nitrogen reduction reaction (NRR) catalysts on defective 2D SiPV layered structures through first-principles calculation. A systematic screening identified Mo@SiPV, Nb@SiPV, Ta@SiPV and W@SiPV as superior, demonstrating enhanced ammonia synthesis with significantly lower limiting potentials (-0.25, -0.45, -0.49 and -0.15 V, respectively), compared to the benchmark -0.87 eV for the defective SiP. In addition, the descriptor ΔG*N was introduced to establish the relationship between the different NRR intermediates, and the volcano plot of the limiting potentials were determined for their potential-determining steps (PDS). Remarkably, the limiting voltage of the NRR possesses a good linear relationship with the active center TM atom Ɛd, which is a reliable descriptor for predicting the limiting voltage. Furthermore, we verified the stability (using Ab Initio Molecular Dynamics - AIMD) and high selectivity (UL(NRR)-UL(HER) > -0.5 V) of these four catalysts in vacuum and solvent environments. This study systematically demonstrates the strong catalytic potential of 2D TM@SiPV(TM = Mo, Nb, Ta, W) single-atom catalysts for nitrogen reduction electrocatalysis.

Unraveling the Unique Strong Metal-Support Interaction in Titanium Dioxide Supported Platinum Clusters for the Hydrogen Evolution Reaction

Strong metal-support interaction (SMSI) is crucial to modulating the nature of metal species, yet the SMSI behaviors of sub-nanometer metal clusters remain unknown due to the difficulties in constructing SMSI at cluster scale. Herein, we achieve the successful construction of the SMSI between Pt clusters and amorphous TiO2 nanosheets by vacuum annealing, which requires a relatively low temperature that avoids the aggregation of small clusters. In situ scanning transmission electron microscopy observation is employed to explore the SMSI behaviors, and the results reveal the dynamic rearrangement of Pt atoms upon annealing for the first time. The originally disordered Pt atoms become ordered as the crystallizing of the amorphous TiO2 support, forming an epitaxial interface between Pt and TiO2. Such a SMSI state can remain stable in oxidation environment even at 400 °C. Further investigations prove that the electron transfer from TiO2 to Pt occupies the Pt 5d orbitals, which is responsible for the disappeared CO adsorption ability of Pt/TiO2 after forming SMSI. This work not only opens a new avenue for constructing SMSI at cluster scale but also provides in-depth understanding on the unique SMSI behavior, which would stimulate the development of supported metal clusters for catalysis applications.

Advancements in Electrocatalytic Nitrogen Reduction: A Comprehensive Review of Single-Atom Catalysts for Sustainable Ammonia Synthesis

Electrocatalytic nitrogen reduction technology seamlessly aligns with the principles of environmentally friendly chemical production. In this paper, a comprehensive review of recent advancements in electrocatalytic NH3 synthesis utilizing single-atom catalysts (SACs) is offered. Into the research and applications of three categories of SACs: noble metals (Ru, Au, Rh, Ag), transition metals (Fe, Mo, Cr, Co, Sn, Y, Nb), and nonmetallic catalysts (B) in the context of electrocatalytic ammonia synthesis is delved. In-depth insights into the material preparation methods, single-atom coordination patterns, and the characteristics of the nitrogen reduction reaction (NRR) are provided. The systematic comparison of the nitrogen reduction capabilities of various SAC types offers a comprehensive research framework for their integration into electrocatalytic NRR. Additionally, the challenges, potential solutions, and future prospects of incorporating SACs into electrocatalytic nitrogen reduction endeavors are discussed.

Built-In Positive Valence Space Shifting the Chemical Equilibrium Forward for Nitrate Reduction to Ammonia

The electrochemical conversion of nitrate pollutants into value-added ammonia (NH3) is an appealing alternative synthetic route for sustainable NH3 production. However, the development of the electrocatalytic nitrate-to-ammonia reduction reaction (NO3RR) has been hampered by unruly reactants and products at the interface and the accompanied sluggish kinetic rate. In this work, a built-in positive valence space is successfully constructed over FeCu nanocrystals to rationally regulate interfacial component concentrations and positively shift the chemical equilibrium. With positive valence Cu optimizing the active surface, the space between the stern and shear layers becomes positive, which is able to continuously attract the negatively charged NO3- reactant and repulse the positively charged NH4+ product even under high current density, thus significantly boosting the NO3RR kinetics. The system with a built-in positive valence space affords an ampere-level NO3RR performance with the highest NH3 yield rate of 150.27 mg h-1 mg-1 at -1.3 V versus RHE with an outstanding NH3 current density of 189.53 mA cm-2, as well as a superior Faradaic efficiency (FE) of 97.26% at -1.2 V versus RHE. The strategy proposed here underscores the importance of interfacial concentration regulation and can find wider applicability in other electrochemical syntheses suffering from sluggish kinetics.

Modulating charge oriented accumulation via interfacial chemical-bond on In2O3/Bi2MoO6 heterostructures for photocatalytic nitrogen fixation

Photocatalytic nitrogen fixation presents an eco-friendly approach to converting atmospheric nitrogen into ammonia (NH3), but the process faces challenges due to rapid interface charge recombination. Here, we report an innovative charge transfer and oriented accumulation strategy using an In-O-Mo bond-modulated S-scheme heterostructure composed of In2O3/Bi2MoO6 (In/BMO) synthesized using a simple electrostatic assembly. The unique interfacial arrangement with optimal photocatalyst configuration (3 % In/BMO) enabled enhanced photogenerated electron separation and transfer, leading to a remarkable nitrogen fixation rate of approximately 150.9 μmol·gcat-1·h-1 under visible light irradiation. The performance of the photocatalyst was 9-fold and 27-fold higher than that of its pristine components, Bi2MoO6 and In2O3, respectively. The experimental and theoretical evaluation deemed interfacial In-O-Mo bonds crucial for rapid transfer and charge-oriented accumulation. Whereas the generated internal electric field drove the spatial separation and transfer of photo-generated electrons and holes, significantly enhancing the photocatalytic N2-to-NH3 conversion efficiency. The proposed work lays the foundation for designing S-scheme heterostructures with highly efficient interfacial bonds, offering a promising avenue for substantial improvements in photocatalytic nitrogen fixation.

Boosting Electrocatalytic N2 Reduction to NH3 by Enhancing N2 Activation via Interaction between Au Nanoparticles and MIL-101(Fe) in Neutral Electrolytes

Electrocatalytic nitrogen reduction reaction (NRR) has attracted much attention as a sustainable ammonia production technology, but it needs further exploration due to its slow kinetics and the existence of competitive side reactions. In this research, xAu/MIL-101(Fe) catalysts were obtained by loading gold nanoparticles (Au NPs) onto MIL-101(Fe) using a one-step reduction strategy. Herein, MIL-101(Fe), with high specific surface area and strong N2 adsorption capacity, is used as a support to disperse Au NPs to increase the electrochemical active surface area. Au NPs, with a high NRR activity, is introduced as the active site to promote charge transfer and intermediate formation rates. More importantly, the strong interaction between Au NPs and MIL-101(Fe) enhances the electron transfer between Au NPs and MIL-101(Fe), thereby enhancing the activation of N2 and achieving efficient NRR. Among the prepared catalysts, 15 %Au/MIL-101(Fe) has the highest NH3 yield of 46.37 μg h-1 mg-1 cat and a Faraday efficiency of 39.38 % at -0.4 V (vs. RHE). In-situ FTIR reveals that the NRR mechanism of 15 %Au/MIL-101(Fe) follows the binding alternating pathway and also indicates that the interaction between Au NPs and MIL-101(Fe) strengthens the activation of the N≡N bond in the rate-limiting process, thereby accelerating the NRR process.

Rare-Earth Lanthanum-Evoked Amorphization and Optimization to Boost Ambient Nitrogen Fixation over Single-Atom Catalysts

Single-atom catalysts (SACs) have been widely studied in a variety of electrocatalysis. However, its application in the electrocatalytic nitrogen reduction reaction (NRR) field still suffers from unsatisfactory performance, due to the sluggish mass transfer and significant kinetic barriers. Herein, a novel rare-earth-lanthanum-evoked optimization strategy is proposed to boost ambient NRR over SACs. The incorporation of La with a large atomic radius tends to break the atomic long-range order and trigger the amorphization of SACs, endowing a greater density of dangling bonds that could modify affinity for reactants and adsorbates. Moreover, with unique 5d16s2 valence-electron configurations, its presence could further enrich the electron density and enhance the intrinsic activity of single-metal center via the valence orbital coupling. As expected, the La-modified catalyst presents excellent activity toward the electrochemical NRR, delivering a maximum ammonia yield rate of 33.91 μg h-1 mg-1 and a remarkable Faradaic efficiency of 53.82%.

Advances in Naked Metal Clusters for Catalysis

The properties of sub-nano metal clusters are governed by quantum confinement and their large surface-to-bulk ratios, atomically precise compositions and geometric/electronic structures. Advances in metal clusters lead to new opportunities in diverse aspects of sciences including chemo-sensing, bio-imaging, photochemistry, and catalysis. Naked metal clusters having synergic multiple active sites and coordinative unsaturation and tunable stability/activity enable researchers to design atomically precise metal catalysts with tailored catalysis for different reactions. Here we summarize the progress of ligand-free naked metal clusters for catalytic applications. It is anticipated that this review helps to better understand the chemistry of small metal clusters and facilitates the design and development of new catalysts for potential applications.

Dynamic Reconstruction of Two-Dimensional Defective Bi Nanosheets for Efficient Electrocatalytic Urea Synthesis

Catalyst surface dynamics drive the generation of active species for electrocatalytic reactions. Yet, the understanding of dominant site formation and reaction mechanisms is limited. In this study, we thoroughly investigate the dynamic reconstruction of two-dimensional defective Bi nanosheets from exfoliated Bi2Se3 nanosheets under electrochemical CO2 and nitrate (NO3 -) reduction conditions. The ultrathin Bi2Se3 nanosheets obtained by NaBH4-assisted cryo-mediated liquid-phase exfoliation are more easily reduced and reconstructed to Bi nanosheets with high-density grain boundaries (GBs; GB-rich Bi). The reconstructed GB-rich Bi catalyst affords a remarkable yield rate of 4.6 mmol h-1 mgcat. -1 and Faradaic efficiency of 32 % for urea production at -0.40 V vs. RHE. Notably, this yield rate is 2 and 8.2 times higher than those of the low-GB Bi and bulk Bi catalysts, respectively. Theoretical analysis demonstrates that the GB sites significantly reduce the *CO and *NH2 intermediate formation energy and C-N coupling energy barrier, enabling selective urea electrosynthesis on the GB-rich Bi catalyst. This work will trigger further research into the structure-activity interplay in dynamic processes using in situ techniques.

Design of Single-Atom Catalysts for E lectrocatalytic Nitrogen Fixation

The Electrochemical nitrogen reduction reaction (ENRR) can be used to solve environmental problems as well as energy shortage. However, ENRR still faces the problems of low NH3 yield and low selectivity. The NH3 yield and selectivity in ENRR are affected by multiple factors such as electrolytic cells, electrolytes, and catalysts, etc. Among these catalysts are at the core of ENRR research. Single-atom catalysts (SACs) with intrinsic activity have become an emerging technology for numerous energy regeneration, including ENRR. In particular, regulating the microenvironment of SACs (hydrogen evolution reaction inhibition, carrier engineering, metal-carrier interaction, etc.) can break through the limitation of intrinsic activity of SACs. Therefore, this Review first introduces the basic principles of NRR and outlines the key factors affecting ENRR. Then a comprehensive summary is given of the progress of SACs (precious metals, non-precious metals, non-metallic) and diatomic catalysts (DACs) in ENRR. The impact of SACs microenvironmental regulation on ENRR is highlighted. Finally, further research directions for SACs in ENRR are discussed.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Mechanistic insights into the electrolyte effects on the electrochemical nitrogen reduction reaction using copper hexacyanoferrate/f-MWCNT nano-composites

Developing an efficient, selective, and stable electrocatalysis system for the electrocatalytic N2 reduction reaction (ENRR) is a promising strategy for the green and sustainable production of ammonia. The activity, selectivity, and stability of various electrocatalysts in different electrolyte solvents, mainly acidic and alkaline electrolytes, are commonly compared in the literature. However, a mechanistic insight into the effect of these electrolytes on ENRR activity is lacking. Herein we demonstrate that the acidity or alkalinity of the electrolyte is a key factor in determining the rate-limiting step and, by extension, the ENRR performance of an electrochemical setup for the electroproduction of ammonia. Our results from ex situ X-ray photoelectron, Raman, and FTIR spectroscopy analysis of the fresh and spent Cu-hexacyanoferrate Prussian blue analogue-decorated functionalized carbon nanotube (CuFe PBA/f-CNT) catalyst reveal that NH4+-species are more strongly adsorbed on the catalyst surface during the ENRR in acidic than in alkaline electrolytes. The results of our detailed rotating ring-disc electrode voltammetry studies suggest that the ENRR over CuFe PBA/f-CNT is mostly controlled by surface adsorption in an acidic electrolyte and by mass transport in an alkaline electrolyte. In situ Raman spectroscopy confirms this finding and shows that the leaching of Fe(CN)6 species from the CuFe PBA/f-CNT composite in an alkaline electrolyte greatly affects the ENRR performance. We believe that the work presented herein offers a new insight into the mechanistic aspects of the ENRR in different electrolyte systems and hence can prove very valuable for the development of effective ENRR electrode/electrolyte systems for practical applications.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Theoretical Insight into the Special Synergy of Bimetallic Site in Co/MoC Catalyst to Promote N2 -to-NH3 Conversion

The catalytic mechanisms of nitrogen reduction reaction (NRR) on the pristine and Co/α-MoC(001) surfaces were explored by density functional theory calculations. The results show that the preferred pathway is that a direct N≡N cleavage occurs first, followed by continuous hydrogenations. The production of second NH3 molecule is identified as the rate-limiting step on both systems with kinetic barriers of 1.5 and 2.0 eV, respectively, indicating that N2 -to-NH3 transformation on bimetallic surface is more likely to occur. The two components of the bimetallic center play different roles during NRR process, in which Co atom does not directly participate in the binding of intermediates, but primarily serves as a reservoir of H atoms. This special synergy makes Co/α-MoC(001) have superior activity for ammonia synthesis. The introduction of Co not only facilitates N2 dissociation, but also accelerates the migration of H atom due to the antibonding characteristic of Co-H bond. This study offers a facile strategy for the rational design and development of efficient catalysts for ammonia synthesis and other reactions involving the hydrogenation processes.

Oxygen vacancy modulation in interfacial engineering Fe3O4 over carbon nanofiber boosting ambient electrocatalytic N2 reduction

The oxygen vacancy modulation of interface-engineered Fe3O4 nanograins over carbon nanofiber (Fe@CNF) was achieved to improve electrocatalytic nitrogen reduction reaction (NRR) activity and stability via facile electrospinning and tuning thermal procedure. The optimal catalyst calcined at 800 ℃ (Fe@CNF-800) was endowed with abundant nanograin boundaries and optimized oxygen vacancy (Vo) concentration of iron oxides, thereby affording 37.1 μg h-1 mgcat.-1 (-0.2 V vs. reversible hydrogen electrode (RHE)) NH3 yield and rational Faraday efficiency (10.2%), with 13.6 times atomic activity enhancement compared to of that commercial Fe3O4. The interfacial effect of assembled nanograins in particles correlated with the formation of Vo and more intrinsic active sites, which is conducive to the trapping and activation of nitrogen (N2). The in-situ X-ray photoelectron spectroscopy (XPS) measurement revealed the real consumption of adsorbed oxygen when introducing N2 by the trapping effect of Vo. Density-Functional-Theory (DFT) calculation validates the promotive hydrogenation effect and elimination of hydrogen intermediate (H*) interacted with N2 transferring toward oxygen of the support. The optimal catalyst shows a lasting NRR activity at least 90 h, outperforming most reported Fe-based NRR catalysts.

Activity Trend and Selectivity of Electrochemical Ammonia Synthesis in Reverse Artificial Nitrogen Cycle

Ammonia is important for modern agriculture and food production as it is a major source of fertilizer. Electrochemical ammonia synthesis (EAS) with sustainable energy generated electricity and decentralized reactors has been considered as environmentally friendly process. Several nitrogen sources have been considered and intensively studied in experiments and computations. Recently, it has been proposed and demonstrated that nitrogen oxides (NOx ) electroreduction for selective ammonia production is feasible. Fundamental insights on experimental observation are necessary for more rational design of catalysts and reactors in the future. In this concept, we review the theoretical and computational insights of electrochemical nitrogen oxides reduction, particularly, the activity trend over diverse transition metal catalysts and products selectivity at varying potentials. Finally, we address the opportunities and challenges in the reverse artificial nitrogen cycle, as well as fundamental issues in electrochemical reaction modelling.

Similar electronic state effect enables excellent activity for nitrate-to-ammonia electroreduction on both high- and low-density double-atom catalysts

Double-atom catalysts (DACs) for harmful nitrate (NO3-) electroreduction to valuable ammonia (eNO3RR) is attractive for both environmental remediation and energy transformation. However, the limited metal loading in most DACs largely hinders their applications in practical catalytic applications. Therefore, exploring ultrahigh-density (UHD) DACs with abundant active metal centers and excellent eNO3RR activity is highly desired under the site-distance effect. Herein, starting from the experimental M2N6 motif deposited on graphene, we firstly screened the low-density (LD) Mn2N6 and Fe2N6 DACs with high eNO3RR activity and then established an appropriate activity descriptor for the LD-DAC system. By utilizing this descriptor, the corresponding Mn2N6 and Fe2N6 UHD-DACs with dynamic, thermal, thermodynamic, and electrochemical stabilities, are identified to locate at the peak of activity volcano, exhibiting rather-low limiting potentials of -0.25 and -0.38 V, respectively. Further analysis in term of spin state and orbital interaction, confirms that the electronic state effect similar to that of LD-DACs enable the excellent eNO3RR activity to be maintained in the UHD-DACs. These findings highlight the promising application of Mn2N6 and Fe2N6 UHD-DACs in nitrate electroreduction for NH3 production and provide impetus for further experimental exploration of ultrahigh-density DACs based on their intrinsic electronic states.

Optimizing oxygen vacancies through grain boundary engineering to enhance electrocatalytic nitrogen reduction

Electrocatalytic nitrogen reduction is a challenging process that requires achieving high ammonia yield rate and reasonable faradaic efficiency. To address this issue, this study developed a catalyst by in situ anchoring interfacial intergrown ultrafine MoO2 nanograins on N-doped carbon fibers. By optimizing the thermal treatment conditions, an abundant number of grain boundaries were generated between MoO2 nanograins, which led to an increased fraction of oxygen vacancies. This, in turn, improved the transfer of electrons, resulting in the creation of highly active reactive sites and efficient nitrogen trapping. The resulting optimal catalyst, MoO2/C700, outperformed commercial MoO2 and state-of-the-art N2 reduction catalysts, with NH3 yield and Faradic efficiency of 173.7 μg h-1 mg-1cat and 27.6%, respectively, under - 0.7 V vs. RHE in 1 M KOH electrolyte. In situ X-ray photoelectron spectroscopy characterization and density functional theory calculation validated the electronic structure effect and advantage of N2 adsorption over oxygen vacancy, revealing the dominant interplay of N2 and oxygen vacancy and generating electronic transfer between nitrogen and Mo(IV). The study also unveiled the origin of improved activity by correlating with the interfacial effect, demonstrating the big potential for practical N2 reduction applications as the obtained optimal catalyst exhibited appreciable catalytic stability during 60 h of continuous electrolysis. This work demonstrates the feasibility of enhancing electrocatalytic nitrogen reduction by engineering grain boundaries to promote oxygen vacancies, offering a promising avenue for efficient and sustainable ammonia production.

Metal-Based Electrocatalysts for Selective Electrochemical Nitrogen Reduction to Ammonia

Ammonia (NH3) plays a significant role in the manufacture of fertilizers, nitrogen-containing chemical production, and hydrogen storage. The electrochemical nitrogen reduction reaction (e-NRR) is an attractive prospect for achieving clean and sustainable NH3 production, under mild conditions driven by renewable energy. The sluggish cleavage of N≡N bonds and poor selectivity of e-NRR are the primary challenges for e-NRR, over the competitive hydrogen evolution reaction (HER). The rational design of e-NRR electrocatalysts is of vital significance and should be based on a thorough understanding of the structure-activity relationship and mechanism. Among the various explored e-NRR catalysts, metal-based electrocatalysts have drawn increasing attention due to their remarkable performances. This review highlighted the recent progress and developments in metal-based electrocatalysts for e-NRR. Different kinds of metal-based electrocatalysts used in NH3 synthesis (including noble-metal-based catalysts, non-noble-metal-based catalysts, and metal compound catalysts) were introduced. The theoretical screening and the experimental practice of rational metal-based electrocatalyst design with different strategies were systematically summarized. Additionally, the structure-function relationship to improve the NH3 yield was evaluated. Finally, current challenges and perspectives of this burgeoning area were provided. The objective of this review is to provide a comprehensive understanding of metal-based e-NRR electrocatalysts with a focus on enhancing their efficiency in the future.

Generalized Rapid Synthesis of Supported Nanocluster Catalyst for Mild Hydrogenation of Phenol toward KA Oil

Homogeneous and nanometric metal clusters with unique electronic structures are promising for catalysis, however, common synthesis techniques for metal clusters suffer from large size and even metal nanocrystals attributing to their high surface energy and unsaturated configurations. Herein, a generalized rapid annealing strategy for synthesizing a series of supported metal clusters as superior catalysts is developed. Remarkably, TiO2 supported platinum nanoclusters (Pt NC/TiO2 ) exhibits the excellent catalytic activity to realize phenol hydrogenation under mild conditions. The complete phenol conversion rate and 100% selectivity toward KA oil are achieved in aqueous solution at room temperature and normal pressure. Semi-continuous scale up production of KA oil is successfully performed under mild conditions. Such excellent performance mainly originates from the partial reconstruction of Pt NC/TiO2 in aqueous phenol solution. Considering that the phenol can be produced from lignin, this study underpins a facile, sustainable, and economical route to synthesize nylon from biomass.

Coupling of N2 and O2 in the Gas Phase to Synthesize Nitric Oxide at Room Temperature: A Zeldovich-Like Strategy

Dinitrogen (N2) activation and its chemical transformations are some of the most challenging topics in chemistry. Herein, we report that heteronuclear metal anions AuNbBO- can mediate the direct coupling of N2 and O2 to generate NO molecules. N2 first forms the nondissociative adsorption product AuNbBON2- on AuNbBO-. In the following reactions with two O2 molecules, two NO molecules are gradually released, with the formation of AuNbBO2N- and AuNbBO3-. In the reaction with the first O2, the generated nitrene radical (N••-) originating from the dissociated N2, induces the activation of O2. Subsequently, the second O2 is anchored and forms a superoxide radical (O2•-); this radical attacks the other N atom to form an N-O bond, releasing the second NO. The N••- and O2•- radicals play key roles in the reactions. The mechanism adopted in this direct oxidation of N2 by O2 to NO can be labeled as a Zeldovich-like mechanism.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Electrochemical Nitrogen Fixation for Green Ammonia: Recent Progress and Challenges

Ammonia, a key feedstock used in various industries, has been considered a sustainable fuel and energy storage option. However, NH3 production via the conventional Haber-Bosch process is costly, energy-intensive, and significantly contributing to a massive carbon footprint. An electrochemical synthetic pathway for nitrogen fixation has recently gained considerable attention as NH3 can be produced through a green process without generating harmful pollutants. This review discusses the recent progress and challenges associated with the two relevant electrochemical pathways: direct and indirect nitrogen reduction reactions. The detailed mechanisms of these reactions and highlight the recent efforts to improve the catalytic performances are discussed. Finally, various promising research strategies and remaining tasks are presented to highlight future opportunities in the electrochemical nitrogen reduction reaction.

Intrinsic and external active sites of single-atom catalysts

Active components with suitable supports are the common paradigm for industrial catalysis, and the catalytic activity usually increases with minimizing the active component size, generating a new frontier in catalysis, single-atom catalysts (SACs). However, further improvement of SACs activity is limited by the relatively low loading of single atoms (SAs, which are heteroatoms for most SACs, i.e., external active sites) because of the highly favorable aggregation of single heteroatoms during preparation. Research interest should be shifted to investigate SACs with intrinsic SAs, which could circumvent the aggregation of external SAs and consequently increase the SAs loading while maintaining them individual to further improve the activity. In this review, SACs with external or intrinsic SAs are discussed and, at last, the perspectives and challenges for obtaining high-loading SACs with intrinsic SAs are outlined.

Converting N2 molecules into NH3 with TiO2/Fe3O4 composite covered with a thin water layer under ambient condition

As ammonia manufacture today require huge energy and very pure hydrogen gas and moreover emit large quantities of CO₂, researches for new ammonia synthesis methods are actively performed. Here, author reports the novel method through which N₂ molecules in air is reduced into ammonia with TiO₂/Fe₃O₄ composite having thin water layer on composite's surface under ambient condition (less than 100 °C and atmospheric pressure). The composites were composed of both nm-sized TiO₂ particles and μm-sized Fe₃O₄ ones. First, composites were held in refrigerator, mainly at that time, N₂ molecules in air adsorbed onto surface of composite. Next, the composite was irradiated with various lights including solar light, 365 nm LED light and tungsten light through thin water layer formed by condensation of water vapour in air. Reliable amount of ammonia was obtained under 5 min's irradiation of solar light or of both 365 m LED light and 500 W tungsten light. This reaction was catalytic reaction promoted by photocatalytic one. In addition, holding in freezer instead of refrigerator provided larger amount of ammonia. Maximum ammonia yield was approximately 18.7 μmol/g 5 min under irradiation of 300 W tungsten light only.

Photoelectrochemical N2 -to-NH3 Fixation with High Efficiency and Rates via Optimized Si-Based System at Positive Potential versus Li0/

As a widely used commodity chemical, ammonia is critical for producing nitrogen-containing fertilizers and serving as the promising zero-carbon energy carrier. Photoelectrochemical nitrogen reduction reaction (PEC NRR) can provide a solar-powered green and sustainable route for synthesis of ammonia (NH₃ ). Herein, an optimum PEC system is reported with an Si-based hierarchically-structured PdCu/TiO₂ /Si photocathode and well-thought-out trifluoroethanol as the proton source for lithium-mediated PEC NRR, achieving a record high NH₃ yield of 43.09 µg cm^-2 h^-1 and an excellent faradaic efficiency of 46.15% under 0.12 MPa O₂ and 3.88 MPa N₂ at 0.07 V versus lithium(0/+) redox couple (vs Li^0/+ ). PEC measurements coupled with operando characterization reveal that the PdCu/TiO₂ /Si photocathode under N₂ pressures facilitate the reduction of N₂ to form lithium nitride (Li₃ N), which reacts with active protons to produce NH₃ while releasing the Li⁺ to reinitiate the cycle of the PEC NRR. The Li-mediated PEC NRR process is further enhanced by introducing small amount of O₂ or CO₂ under pressure by accelerating the decomposition of Li₃ N. For the first time, this work provides mechanistic understanding of the lithium-mediated PEC NRR process and opens new avenues for efficient solar-powered green conversion of N₂ -to-NH₃ .

Oxygen-Bridged Vanadium Single-Atom Dimer Catalysts Promoting High Faradaic Efficiency of Ammonia Electrosynthesis

Single-atom catalysts have already been widely investigated for the nitrogen reduction reaction (NRR). However, the simplicity of a single atom as an active center encounters the challenge of modulating the multiple reaction intermediates during the NRR process. Moving toward the single-atom-dimer (SAD) structures can not only buffer the multiple reaction intermediates but also provide a strategy to modify the electronic structure and environment of the catalysts. Here, a structure of a vanadium SAD (V-O-V) catalyst on N-doped carbon (O-V₂-NC) is proposed for the electrochemical nitrogen reduction reaction, in which the vanadium dimer is coordinated with nitrogen and simultaneously bridged by one oxygen. The oxygen-bridged metal atom dimer that has more electron deficiency is perceived to be the active center for nitrogen reduction. A loop evolution of the intermediate structure was found during the theoretical process simulated by density functional theory (DFT) calculation. The active center V-O-V breaks down to V-O and V during the protonation process and regenerates to the original V-O-V structure after releasing all the nitrogen species. Thus, the O-V₂-NC structure presents excellent activity toward the electrochemical NRR, achieving an outstanding faradaic efficiency (77%) along with the yield of 9.97 μg h^-1 mg^-1 at 0 V (vs RHE) and comparably high ammonia yield (26 μg h^-1 mg^-1) with the FE of 4.6% at -0.4 V (vs RHE). This report synthesizes and proves the peculiar V-O-V dimer structure experimentally, which also contributes to the library of SAD catalysts with superior performance.

Boosting charge-transfer in tuned Au nanoparticles on defect-rich TiO2 nanosheets for enhancing nitrogen electroreduction to ammonia production

The electrocatalytic nitrogen reduction reaction (eNRR) to ammonia (NH₃) has been recognized as an effective, carbon-neutral, and great-potential strategy for ammonia production. However, the conversion efficiency and selectivity of eNRR still face significant challenges due to the slow transfer kinetics and lack of effective N₂ adsorption and activation sites in this process. Herein, we designed and fabricated defect-rich TiO₂ nanosheets furnished with oxygen vacancies (OVs) and Au nanoparticles (Au/TiO_2-x) as the electrocatalyst for efficient N₂-fixing. The experimental results demonstrate that OVs act as active sites, which enable efficient chemisorption and activation of N₂ molecules. The Au nanoparticles loaded on the OVs-rich TiO₂ nanosheets not only accelerate charge transfer but also change the local electronic structure, thus enhancing N₂ adsorption and activation. In this work, the optimal Au/TiO_2-x electrocatalyst displays a considerable NH₃ yield activity of 12.5 μg h^-1 mg_cat.^-1 and a faradaic efficiency (FE) of 10.2 % at -0.40 V vs reversible hydrogen electrode (RHE). More importantly, the Au/TiO_2-x exhibits a stable N₂-fixing activity in cycling and it persists even after 80 h of consecutive electrolysis. Density functional theory (DFT) calculations reveal that the OVs serve as the active sites in TiO₂, while Au nanoparticles are crucial for improving N₂ chemisorption and lowering the reaction energy barrier by facilitating the charge transfer for eNRR with a distal hydrogenation pathway. This research offers a rational catalytic site design for modulating charge transfer of active sites on metal-supported defective catalysts to boost N₂ electroreduction to NH₃.

Disordered Au Nanoclusters for Efficient Ammonia Electrosynthesis

The electrochemical nitrogen (N₂ ) reduction reaction (N₂ RR) under mild conditions is a promising and environmentally friendly alternative to the traditional Haber-Bosch process with high energy consumption and greenhouse emission for the synthesis of ammonia (NH₃ ), but high-yielding production is rendered challenging by the strong nonpolar N≡N bond in N₂ molecules, which hinders their dissociation or activation. In this study, disordered Au nanoclusters anchored on two-dimensional ultrathin Ti₃ C₂ T_x MXene nanosheets are explored as highly active and selective electrocatalysts for efficient N₂ -to-NH₃ conversion, exhibiting exceptional activity with an NH₃ yield rate of 88.3±1.7 μg h^-1  mg_cat. ^-1 and a faradaic efficiency of 9.3±0.4 %. A combination of in situ near-ambient pressure X-ray photoelectron spectroscopy and operando X-ray absorption fine structure spectroscopy is employed to unveil the uniqueness of this catalyst for N₂ RR. The disordered structure is found to serve as the active site for N₂ chemisorption and activation during the N₂ RR process.

Accelerating ammonia synthesis in a membraneless flow electrolyzer through coupling ambient dinitrogen oxidation and water splitting

An electrochemical approach for ammonia production is successfully developed by coupling the anodic dinitrogen oxidation reaction (NOR) and cathodic hydrogen evolution reaction (HER) within a well-designed membraneless flow electrolyzer. The obtained reactor shows the preferential yield of ammonia over nitrogen oxides on the vanadium nitride catalyst surface. At an applied oxidation potential of 2.25 V versus the reversible hydrogen electrode (vs RHE), a promoted ammonia production rate and Faradaic efficiency (FE) were obtained with 9.9 mmol g^-1 h^-1 (0.029 mmol cm^-2 h^-1) and 4.8%, respectively. Besides, the negative affection of ammonia contamination is efficiently alleviated. Density functional theory calculations revealed that the thermodynamic energy needed to produce ammonia (-0.63 eV) is far lower than that of producing nitrogen oxide (0.96 eV) from hydrogenated nitrogen oxides [∗N₂OH] splitting, confirming the coupling of NOR and HER.

Noble-Metal-Metalloid Alloy Architectures: Mesoporous Amorphous Iridium-Tellurium Alloy for Electrochemical N2 Reduction

Amorphous noble metals with high surface areas have attracted significant interest as heterogeneous catalysts due to the numerous dangling bonds and abundant unsaturated surface atoms created by the amorphous phase. However, synthesizing amorphous noble metals with high surface areas remains a significant challenge due to strong isotropic metallic bonds. This paper describes the first example of a mesoporous amorphous noble metal alloy [iridium-tellurium (IrTe)] obtained using a micelle-directed synthesis method. The resulting mesoporous amorphous IrTe electrocatalyst exhibits excellent performance in the electrochemical N₂ reduction reaction. The ammonia yield rate is 34.6 μg mg^-1 h^-1 with a Faradaic efficiency of 11.2% at -0.15 V versus reversible hydrogen electrode in 0.1 M HCl solution, outperforming comparable crystalline and Ir metal counterparts. The interconnected porous scaffold and amorphous nature of the alloy create a complementary effect that simultaneously enhances N₂ absorption and suppresses the hydrogen evolution reaction. According to theoretical simulations, incorporating Te in the IrTe alloy effectively strengthens the adsorption of N₂ and lowers the Gibbs free energy for the rate-limiting step of the electrocatalytic N₂ reduction reaction. Mesoporous chemistry enables a new route to achieve high-performance amorphous metalloid alloys with properties that facilitate the selective electrocatalytic reduction of N₂.

Porphyrin-Based Covalent Organic Frameworks Anchoring Au Single Atoms for Photocatalytic Nitrogen Fixation

The development of efficient photocatalysts for N₂ fixation to produce NH₃ under ambient conditions remains a great challenge. Since covalent organic frameworks (COFs) possess predesignable chemical structures, good crystallinity, and high porosity, it is highly significant to explore their potential for photocatalytic nitrogen conversion. Herein, we report a series of isostructural porphyrin-based COFs loaded with Au single atoms (COFX-Au, X = 1-5) for photocatalytic N₂ fixation. The porphyrin building blocks act as the docking sites to immobilize Au single atoms as well as light-harvesting antennae. The microenvironment of the Au catalytic center is precisely tuned by controlling the functional groups at the proximal and distal positions of porphyrin units. As a result, COF1-Au decorated with strong electron-withdrawing groups exhibits a high activity toward NH₃ production with rates of 333.0 ± 22.4 μmol g^-1 h^-1 and 37.0 ± 2.5 mmol g_Au^-1 h^-1, which are 2.8- and 171-fold higher than that of COF4-Au decorated with electron-donating functional groups and a porphyrin-Au molecular catalyst, respectively. The NH₃ production rates could be further increased to 427.9 ± 18.7 μmol g^-1 h^-1 and 61.1 ± 2.7 mmol g_Au^-1 h^-1 under the catalysis of COF5-Au featuring two different kinds of strong electron-withdrawing groups. The structure-activity relationship analysis reveals that the introduction of electron-withdrawing groups facilitates the separation and transportation of photogenerated electrons within the entire framework. This work manifests that the structures and optoelectronic properties of COF-based photocatalysts can be finely tuned through a rational predesign at the molecular level, thus leading to superior NH₃ evolution.

Enabled Efficient Ammonia Synthesis and Energy Supply in a Zinc-Nitrate Battery System by Separating Nitrate Reduction Process into Two Stages

The aqueous electrocatalytic reduction of NO₃ ^- into NH₃ (NitrRR) presents a sustainable route applicable to NH₃ production and potentially energy storage. However, the NitrRR involves a directly eight-electron transfer process generally required a large overpotential (<-0.2 V versus reversible hydrogen electrode (vs. RHE)) to reach optimal efficiency. Here, inspired by biological nitrate respiration, the NitrRR was separated into two stages along a [2+6]-electron pathway to alleviate the kinetic barrier. The system employed a Cu nanowire catalyst produces NO₂ ^- and NH₃ with current efficiencies of 91.5 % and 100 %, respectively at lower overpotentials (>+0.1 vs. RHE). The high efficiency for such a reduction process was further explored in a zinc-nitrate battery. This battery could be specified by a high output voltage of 0.70 V, an average energy density of 566.7 Wh L^-1 at 10 mA cm^-2 and a power density of 14.1 mW cm^-2 , which is well beyond all previously reported similar concepts.

Boosting Electroreduction Kinetics of Nitrogen to Ammonia via Atomically Dispersed Sn Protuberance

Atomically dispersed metal catalysts show potential advantages in N₂ reduction reaction (NRR) due to their excellent activity and efficient metal utilization. Unfortunately, the reported catalysts usually exhibit unsatisfactory NRR activity due to their poor N₂ adsorption and activation. Herein, we report a novel Sn atomically dispersed protuberance (ADP) by coordination with substrate C and O to induce positive charge accumulation on Sn site for improving its N₂ adsorption, activation and NRR performance. The extended X-ray absorption fine structure (EXAFS) spectra confirmed the local coordination structure of the Sn ADPs. NRR activity was significantly promoted via Sn ADPs, exhibiting a remarkable NH₃ yield (R_NH3 ) of 28.3 μg h^-1  mg_cat ^-1 (7447 μg h^-1  mg_Sn ^-1 ) at -0.3 V. Furthermore, the enhanced N₂ H_x intermediates was verified by in situ experiments, yielding consistent results with DFT calculation. This work opens a new avenue to regulate the activity and selectivity of N₂ fixation.

Advances in Semiconductor-Based Nanocomposite Photo(electro)catalysts for Nitrogen Reduction to Ammonia

Photo(electro)catalytic nitrogen fixation technology is a promising ammonia synthesis technology using clean solar and electric energy as the driving energy. Abundant nitrogen and water as raw materials uphold the principle of green and sustainable development. However, the generally low efficiency of the nitrogen reduction reaction has seriously restricted the application and development of this technology. The paper introduces the nitrogen reduction process and discusses the main challenges and differences in the current photo(electro)catalytic nitrogen fixation systems. It focuses on promoting the adsorption and activation of N2 and the resolution and diffusion of NH3 generated. In recent years, reviews of the modification strategies of semiconductor materials in light of the typical cases of nitrogen fixation have been reported in the literature. Finally, the future development trend of this field is analyzed and prospected.

Recent Progress in Electrochemical Nitrogen Reduction on Transition Metal Nitrides

Distributed electrochemical nitrogen reduction reaction (ENRR) powered by renewable energy for the on-site production of ammonia is an attractive alternative to the industrial Haber-Bosch process, which is responsible for roughly 2 % of global energy consumption. In this Review, we summarize recent progress in the ENRR catalyzed by transition metal nitrides (TMNs). The unique electronic structures of TMNs make them promising ENRR catalysts for active and selective ammonia production, which have been predicted theoretically and demonstrated experimentally. Reaction pathways and deactivation mechanisms of the ENRR on different TMNs are surveyed, and current understanding of structure-activity relations is discussed. To develop highly active, selective, and stable TMN catalysts for industrial-scale ENRR, membrane electrode assembly configuration is recommended in catalyst evaluation. Furthermore, we highlight the importance of developing mechanistic understanding on ENRR with different operando spectroscopic techniques.