1
|
Lv J, Zhang C, Qu G, Pan K, Qin J, Wei K, Liang Y. Modification strategies for semiconductor metal oxide nanomaterials applied to chemiresistive NO x gas sensors: A review. Talanta 2024; 273:125853. [PMID: 38460422 DOI: 10.1016/j.talanta.2024.125853] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2023] [Revised: 02/14/2024] [Accepted: 02/28/2024] [Indexed: 03/11/2024]
Abstract
Semiconductor metal oxides (SMOs) nanomaterials are a category of sensing materials that are widely applied to chemiresistive NOx gas sensors. However, there is much space to improve the sensing performance of SMOs nanomaterials. Therefore, how to improve the sensing performance of SMOs nanomaterials for NOx gases has always attracted the interest of researchers. Up to now, there are few reviews focus on the modification strategies of SMOs which applied to NOx gas sensors. In order to compensate for the limitation, this review summarizes the existing modification strategies of SMOs, hoping to provide researchers a view of the research progress in this filed as comprehensive as possible. This review focuses on the progress of the modification of SMOs nanomaterials for chemiresistive NOx (NO, NO2) gas sensors, including the morphology modulation of SMOs, compositing SMOs, loading noble metals, doping metal ions, compositing with carbon nanomaterials, compositing with biomass template, and compositing with MXene, MOFs, conducting polymers. The mechanism of each strategy to enhance the NOx sensing performance of SMOs-based nanomaterials is also discussed and summarized. In addition, the limitations of some of the modification strategies and ways to address them are discussed. Finally, future perspectives for SMOs-based NOx gas sensors are also discussed.
Collapse
Affiliation(s)
- Jiaxin Lv
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| | - Chaoneng Zhang
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| | - Guangfei Qu
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China.
| | - Keheng Pan
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| | - Jin Qin
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| | - Kunling Wei
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| | - Yuqi Liang
- Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Yunnan, 650500, China; National Regional Engineering Research Center-NCW, Yunnan, 650500, China
| |
Collapse
|
2
|
Jo YM, Jo YK, Lee JH, Jang HW, Hwang IS, Yoo DJ. MOF-Based Chemiresistive Gas Sensors: Toward New Functionalities. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2206842. [PMID: 35947765 DOI: 10.1002/adma.202206842] [Citation(s) in RCA: 35] [Impact Index Per Article: 35.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Indexed: 06/15/2023]
Abstract
The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.
Collapse
Affiliation(s)
- Young-Moo Jo
- Department of Materials Science and Engineering, Korea University, Seoul, 02841, Republic of Korea
- Department of Chemistry, Massachusetts Institute of Technology, Cambridge, Massachusetts, 02139, USA
| | - Yong Kun Jo
- Department of Materials Science and Engineering, Korea University, Seoul, 02841, Republic of Korea
| | - Jong-Heun Lee
- Department of Materials Science and Engineering, Korea University, Seoul, 02841, Republic of Korea
| | - Ho Won Jang
- Department of Materials Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul, 08826, Republic of Korea
| | - In-Sung Hwang
- Sentech Gmi Co. Ltd, Seoul, 07548, Republic of Korea
| | - Do Joon Yoo
- SentechKorea Co. Ltd, Paju, 10863, Republic of Korea
| |
Collapse
|
3
|
Ma J, Xie W, Li J, Yang H, Wu L, Zou Y, Deng Y. Micellar Nanoreactors Enabled Site-Selective Decoration of Pt Nanoparticles Functionalized Mesoporous SiO 2 /WO 3-x Composites for Improved CO Sensing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301011. [PMID: 37066705 DOI: 10.1002/smll.202301011] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2023] [Revised: 03/20/2023] [Indexed: 06/19/2023]
Abstract
Site-selective and partial decoration of supported metal nanoparticles (NPs) with transition metal oxides (e.g., FeOx ) can remarkably improve its catalytic performance and maintain the functions of the carrier. However, it is challenging to selectively deposit transition metal oxides on the metal NPs embedded in the mesopores of supporting matrix through conventional deposition method. Herein, a restricted in situ site-selective modification strategy utilizing poly(ethylene oxide)-block-polystyrene (PEO-b-PS) micellar nanoreactors is proposed to overcome such an obstacle. The PEO shell of PEO-b-PS micelles interacts with the hydrolyzed tungsten salts and silica precursors, while the hydrophobic organoplatinum complex and ferrocene are confined in the hydrophobic PS core. The thermal treatment leads to mesoporous SiO2 /WO3-x framework, and meanwhile FeOx nanolayers are in situ partially deposited on the supported Pt NPs due to the strong metal-support interaction between FeOx and Pt. The selective modification of Pt NPs with FeOx makes the Pt NPs present an electron-deficient state, which promotes the mobility of CO and activates the oxidation of CO. Therefore, mesoporous SiO2 /WO3-x -FeOx /Pt based gas sensors show a high sensitivity (31 ± 2 in 50 ppm of CO), excellent selectivity, and fast response time (3.6 s to 25 ppm) to CO gas at low operating temperature (66 °C, 74% relative humidity).
Collapse
Affiliation(s)
- Junhao Ma
- Department of Chemistry, Department of Gastroenterology and Hepatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, State Key Lab of Transducer Technology, Zhongshan Hospital, iChEM, Fudan University, Shanghai, 200433, P. R. China
| | - Wenhe Xie
- Department of Chemistry, Department of Gastroenterology and Hepatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, State Key Lab of Transducer Technology, Zhongshan Hospital, iChEM, Fudan University, Shanghai, 200433, P. R. China
| | - Jichun Li
- Department of Chemistry, Department of Gastroenterology and Hepatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, State Key Lab of Transducer Technology, Zhongshan Hospital, iChEM, Fudan University, Shanghai, 200433, P. R. China
| | - Haitao Yang
- School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang, 330063, P. R. China
| | - Limin Wu
- Institute of Energy and Materials Chemistry, Inner Mongolia University, Hohhot, 010021, P. R. China
| | - Yidong Zou
- Department of Chemistry, Department of Gastroenterology and Hepatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, State Key Lab of Transducer Technology, Zhongshan Hospital, iChEM, Fudan University, Shanghai, 200433, P. R. China
| | - Yonghui Deng
- Department of Chemistry, Department of Gastroenterology and Hepatology, State Key Laboratory of Molecular Engineering of Polymers, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, State Key Lab of Transducer Technology, Zhongshan Hospital, iChEM, Fudan University, Shanghai, 200433, P. R. China
| |
Collapse
|
4
|
Zhou L, Li Z, Chang X, Liu X, Hu Y, Li M, Xu P, Pinna N, Zhang J. PdRh-Sensitized Iron Oxide Ultrathin Film Sensors and Mechanistic Investigation by Operando TEM and DFT Calculation. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301485. [PMID: 37086126 DOI: 10.1002/smll.202301485] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/18/2023] [Revised: 03/14/2023] [Indexed: 05/03/2023]
Abstract
Metal oxide semiconductor (MOS) thin films are of critical importance to both fundamental research and practical applications of gas sensors. Herein, a high-performance H2 sensor based on palladium (Pd) and rhodium (Rh) co-functionalized Fe2 O3 films with an ultrathin thickness of 8.9 nm deposited by using atomic layer deposition is reported. The sensor delivers an exceptional response of 105.9 toward 10 ppm H2 at 230 °C, as well as high selectivity, immunity to humidity, and low detection limit (43 ppb), which are superior to the reported MOS sensors. Importantly, the Fe2 O3 film sensor under dynamic H2 detection is for the first time observed by operando transmission electron microscopy, which provides deterministic evidence for structure evolution of MOS during sensing reactions. To further reveal the sensing mechanism, density functional theory calculations are performed to elucidate the sensitization effect of PdRh catalysts. Mechanistic studies suggest that Pd promotes the adsorption and dissociation of H2 to generate PdHx , while Rh promotes the dissociation of oxygen adsorbed on the surface, thereby jointly promoting the redox reactions on the films. A wireless H2 detection system is also successfully demonstrated using the thin film sensors, certifying a great potential of the strategy to practical sensors.
Collapse
Affiliation(s)
- Lihao Zhou
- College of Physics, Qingdao University, Qingdao, 266071, China
| | - Zishuo Li
- College of Physics, Qingdao University, Qingdao, 266071, China
| | - Xiao Chang
- College of Physics, Qingdao University, Qingdao, 266071, China
| | - Xianghong Liu
- College of Physics, Qingdao University, Qingdao, 266071, China
| | - Yinhua Hu
- College of Physics, Qingdao University, Qingdao, 266071, China
| | - Ming Li
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, 200050, China
| | - Pengcheng Xu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, 200050, China
| | - Nicola Pinna
- Institut für Chemie and IRIS Adlershof, Humboldt-Universität zu Berlin, Brook-Taylor-Str. 2, 12489, Berlin, Germany
| | - Jun Zhang
- College of Physics, Qingdao University, Qingdao, 266071, China
| |
Collapse
|
5
|
Fang TY, Sun XW, Wen XD, Li YX, Liu XX, Song T, Song YZ, Liu ZJ. High-performance phononic crystal sensing structure for acetone solution concentration sensing. Sci Rep 2023; 13:7057. [PMID: 37120441 PMCID: PMC10148828 DOI: 10.1038/s41598-023-34226-4] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2022] [Accepted: 04/26/2023] [Indexed: 05/01/2023] Open
Abstract
A two-dimensional phononic crystal sensor model with high-quality factor and excellent sensitivity for sensing acetone solutions and operating at 25-45 kHz is proposed. The model for filling solution cavities is based on reference designs of quasi-crystal and gradient cavity structures. The transmission spectrum of sensor is simulated by the finite element method. High-quality factor of 45,793.06 and sensitivity of 80,166.67 Hz are obtained for the acetone concentration with 1-9.1%, and quality factor of 61,438.09 and sensitivity of 24,400.00 Hz are obtained for the acetone concentration range of 10-100%, which indicated the sensor could still achieve high sensitivity and quality factor at operating frequencies from 25 to 45 kHz. To verify the application of the sensor to sensing other solutions, the sensitivity for sound velocity and density is calculated as 24.61 m-1 and 0.7764 m3/(kg × s), respectively. It indicates the sensor is sensitive to acoustic impedance changes of the solution and equally suitable for sensing other solutions. The simulation results reveal the phononic crystal sensor possessed high-performance in composition capture in pharmaceutical production and petrochemical industry, which can provide theoretical reference for the design of new biochemical sensors for reliable detection of solution concentration.
Collapse
Affiliation(s)
- Tian-Yin Fang
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| | - Xiao-Wei Sun
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China.
| | - Xiao-Dong Wen
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| | - Yun-Xia Li
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| | - Xi-Xuan Liu
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| | - Ting Song
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| | - Yu-Zhe Song
- Institute of Sensor Technology, Gansu Academy of Sciences, Lanzhou, 730070, China
| | - Zi-Jiang Liu
- School of Mathematics and Physics, Lanzhou Jiaotong University, Lanzhou, 730070, China
| |
Collapse
|
6
|
Kim YB, Kim S, Kim J, Kim JK, Jeong SJ, Oh D, Jung W. Synthesis of Highly Tunable Alloy Nanocatalyst through Heterogeneous Doping Method. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2204693. [PMID: 36509675 PMCID: PMC9929244 DOI: 10.1002/advs.202204693] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/16/2022] [Revised: 11/24/2022] [Indexed: 06/17/2023]
Abstract
The combination of supported metal nanoparticles and functional host oxides catalyze many major industrial reactions. However, uniform dispersion and ideal chemical configuration of such nanoparticles, which determines the catalytic activity, are often difficult to achieve. In this study, a unique combination is proposed of heterogeneous doping and ex-solution for the fabrication of Pt-Ni alloy nanoparticles on CeO2 . By manipulating the reducing conditions, both the particle size and composition are precisely controlled, thereby achieving a highly dispersed and stable alloy nanocatalyst. The unique behavior of controlled alloy composition is elucidated through classical diffusion and precipitation kinetics with elemental analysis of the grain boundaries. Finally, Pt-Ni alloy nanocatalysts are successfully tuned showcasing a breakthrough performance compared to single element catalyst in reverse water gas shift reaction with superior stability and reproducibility.
Collapse
Affiliation(s)
- Yong Beom Kim
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
| | - Seunghyun Kim
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
| | - Jinwook Kim
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
| | - Jun Kyu Kim
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
- Present address:
Samsung Advanced Institute of Technology (SAIT)130 Samsung‐ro, YeongtongguSuwon16678Republic of Korea
| | - Seung Jin Jeong
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
- Present address:
Samsung Electronics129, Samsung‐ro, Yeongtong‐guSuwon16677Republic of Korea
| | - DongHwan Oh
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
| | - WooChul Jung
- Department of Materials Science and EngineeringKorea Advanced Institute of Science and Technology (KAIST)291 Daehak‐ro, Yuseong‐guDaejeon34141Republic of Korea
| |
Collapse
|
7
|
Korotcenkov G, Tolstoy VP. Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:237. [PMID: 36677992 PMCID: PMC9867534 DOI: 10.3390/nano13020237] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/12/2022] [Revised: 01/01/2023] [Accepted: 01/02/2023] [Indexed: 06/17/2023]
Abstract
This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.
Collapse
Affiliation(s)
- Ghenadii Korotcenkov
- Department of Physics and Engineering, Moldova State University, 2009 Chisinau, Moldova
| | - Valeri P. Tolstoy
- Institute of Chemistry, Saint Petersburg State University, Saint Petersburg 198504, Russia
| |
Collapse
|
8
|
Chen DN, Jiang LY, Zhang JX, Tang C, Wang AJ, Feng JJ. Electrochemical label-free immunoassay of HE4 using 3D PtNi nanocubes assemblies as biosensing interfaces. Mikrochim Acta 2022; 189:455. [DOI: 10.1007/s00604-022-05553-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Accepted: 10/28/2022] [Indexed: 11/24/2022]
|
9
|
Guo M, Brewster Ii JT, Zhang H, Zhao Y, Zhao Y. Challenges and Opportunities of Chemiresistors Based on Microelectromechanical Systems for Chemical Olfaction. ACS NANO 2022; 16:17778-17801. [PMID: 36355033 DOI: 10.1021/acsnano.2c08650] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Microelectromechanical-system (MEMS)-based semiconductor gas sensors are considered one of the fastest-growing, interdisciplinary high technologies during the post-Moore era. Modern advancements within this arena include wearable electronics, Internet of Things, and artificial brain-inspired intelligence, among other modalities, thus bringing opportunities to drive MEMS-based gas sensors with higher performance, lower costs, and wider applicability. However, the high demand for miniature and micropower sensors with unified processes on a single chip imposes great challenges. This review focuses on recent developments and pitfalls in MEMS-based micro- and nanoscale gas sensors and details future trends. We also cover the background of the topic, seminal efforts, current applications and challenges, and opportunities for next-generation systems.
Collapse
Affiliation(s)
- Mengya Guo
- School of Chemical Engineering & Technology, Xi'an Jiaotong University, Xi'an, 710049, People's Republic of China
| | - James T Brewster Ii
- Division of Medicinal Chemistry, Pfizer Boulder Research & Development, Boulder, Colorado80301, United States
| | - Huacheng Zhang
- School of Chemical Engineering & Technology, Xi'an Jiaotong University, Xi'an, 710049, People's Republic of China
- School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 21 Nanyang Link, Singapore637371, Singapore
| | - Yuxin Zhao
- School of Chemical Engineering & Technology, Xi'an Jiaotong University, Xi'an, 710049, People's Republic of China
| | - Yanli Zhao
- School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 21 Nanyang Link, Singapore637371, Singapore
| |
Collapse
|
10
|
Yang X, Deng Y, Yang H, Liao Y, Cheng X, Zou Y, Wu L, Deng Y. Functionalization of Mesoporous Semiconductor Metal Oxides for Gas Sensing: Recent Advances and Emerging Challenges. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 10:e2204810. [PMID: 36373719 PMCID: PMC9811452 DOI: 10.1002/advs.202204810] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/22/2022] [Revised: 10/14/2022] [Indexed: 06/16/2023]
Abstract
With the emerging of the Internet of Things, chemiresistive gas sensors have been extensively applied in industrial production, food safety, medical diagnosis, and environment detection, etc. Considerable efforts have been devoted to improving the gas-sensing performance through tailoring the structure, functions, defects and electrical conductivity of sensitive materials. Among the numerous sensitive materials, mesoporous semiconductor metal oxides possess unparalleled properties, including tunable pore size, high specific surface area, abundant metal-oxygen bonds, and rapid mass transfer/diffusion behavior (Knudsen diffusion), which have been regarded as the most potential sensitive materials. Herein, the synthesis strategies for mesoporous metal oxides are overviewed, the classical functionalization techniques of sensitive materials are also systemically summarized as a highlight, including construction of mesoporous structure, regulation of micro-nano structure (i.e., heterojunctions), noble metal sensitization (e.g., Au, Pt, Ag, Pd) and heteroatomic doping (e.g., C, N, Si, S). In addition, the structure-function relationship of sensitive materials has been discussed at molecular-atomic level, especially for the chemical sensitization effect, elucidating the interface adsorption/catalytic mechanism. Moreover, the challenges and perspectives are proposed, which will open a new door for the development of intelligent gas sensor in various applications.
Collapse
Affiliation(s)
- Xuanyu Yang
- Department of ChemistryDepartment of Gastroenterology and HepatologyZhongshan HospitalZhangjiang Fudan International Innovation CenterState Key Laboratory of Molecular Engineering of PolymersShanghai Key Laboratory of Molecular Catalysis and Innovative MaterialsiCHEMFudan UniversityShanghai200433China
| | - Yu Deng
- State Key Laboratory for Modification of Chemical Fibers and Polymer MaterialsCollege of Materials Science and EngineeringInstitute of Functional MaterialsDonghua UniversityShanghai201620China
| | - Haitao Yang
- School of Materials Science and EngineeringNanchang Hangkong UniversityNanchang330063China
| | - Yaozu Liao
- State Key Laboratory for Modification of Chemical Fibers and Polymer MaterialsCollege of Materials Science and EngineeringInstitute of Functional MaterialsDonghua UniversityShanghai201620China
| | - Xiaowei Cheng
- Department of ChemistryDepartment of Gastroenterology and HepatologyZhongshan HospitalZhangjiang Fudan International Innovation CenterState Key Laboratory of Molecular Engineering of PolymersShanghai Key Laboratory of Molecular Catalysis and Innovative MaterialsiCHEMFudan UniversityShanghai200433China
| | - Yidong Zou
- Department of ChemistryDepartment of Gastroenterology and HepatologyZhongshan HospitalZhangjiang Fudan International Innovation CenterState Key Laboratory of Molecular Engineering of PolymersShanghai Key Laboratory of Molecular Catalysis and Innovative MaterialsiCHEMFudan UniversityShanghai200433China
| | - Limin Wu
- Institute of Energy and Materials ChemistryInner Mongolia UniversityHohhot010021China
| | - Yonghui Deng
- Department of ChemistryDepartment of Gastroenterology and HepatologyZhongshan HospitalZhangjiang Fudan International Innovation CenterState Key Laboratory of Molecular Engineering of PolymersShanghai Key Laboratory of Molecular Catalysis and Innovative MaterialsiCHEMFudan UniversityShanghai200433China
- School of Materials Science and EngineeringNanchang Hangkong UniversityNanchang330063China
| |
Collapse
|
11
|
Kang H, Joo H, Choi J, Kim YJ, Lee Y, Cho SY, Jung HT. Top-Down Approaches for 10 nm-Scale Nanochannel: Toward Exceptional H 2S Detection. ACS NANO 2022; 16:17210-17219. [PMID: 36223595 DOI: 10.1021/acsnano.2c07785] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Metal oxide semiconductors (MOS) have proven to be most powerful sensing materials to detect hydrogen sulfide (H2S), achieving part per billion (ppb) level sensitivity and selectivity. However, there has not been a way of extending this approach to the top-down H2S sensor fabrication process, completely limiting their commercial-level productions. In this study, we developed a top-down lithographic process of a 10 nm-scale SnO2 nanochannel for H2S sensor production. Due to high-resolution (15 nm thickness) and high aspect ratio (>20) structures, the nanochannel exhibited highly sensitive H2S detection performances (Ra/Rg = 116.62, τres = 31 s at 0.5 ppm) with selectivity (RH2S/Racetone = 23 against 5 ppm acetone). In addition, we demonstrated that the nanochannel could be efficiently sensitized with the p-n heterojunction without any postmodification or an additional process during one-step lithography. As an example, we demonstrated that the H2S sensor performance can be drastically enhanced with the NiO nanoheterojunction (Ra/Rg = 166.2, τres = 21 s at 0.5 ppm), showing the highest range of sensitivity demonstrated to date for state-of-the-art H2S sensors. These results in total constitute a high-throughput fabrication platform to commercialize the H2S sensor that can accelerate the development time and interface in real-life situations.
Collapse
Affiliation(s)
- Hohyung Kang
- Department of Chemical and Biomolecular Engineering (BK-21 Plus) and KAIST Institute for NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
| | - Heeeun Joo
- Department of Chemical and Biomolecular Engineering (BK-21 Plus) and KAIST Institute for NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
| | - Junghoon Choi
- Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117585, Singapore
| | - Yong-Jae Kim
- Department of Chemical and Biomolecular Engineering (BK-21 Plus) and KAIST Institute for NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
| | - Yullim Lee
- School of Chemical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Suwon 16419, Republic of Korea
| | - Soo-Yeon Cho
- School of Chemical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Suwon 16419, Republic of Korea
| | - Hee-Tae Jung
- Department of Chemical and Biomolecular Engineering (BK-21 Plus) and KAIST Institute for NanoCentury, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
| |
Collapse
|
12
|
Singh S, Saggu IS, Chen K, Xuan Z, Swihart MT, Sharma S. Humidity-Tolerant Room-Temperature Selective Dual Sensing and Discrimination of NH 3 and NO Using a WS 2/MWCNT Composite. ACS APPLIED MATERIALS & INTERFACES 2022; 14:40382-40395. [PMID: 36001381 DOI: 10.1021/acsami.2c09069] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Continuous detection of toxic and hazardous gases like nitric oxide (NO) and ammonia (NH3) is needed for environmental management and noninvasive diagnosis of various diseases. However, to the best of our knowledge, dual detection of these two gases has not been previously reported. To address the challenge, we demonstrate the design and fabrication of low-cost NH3 and NO dual gas sensors using tungsten disulfide/multiwall carbon nanotube (WS2/MWCNT) nanocomposites as sensing channels which maintained their performance in a humid environment. The composite-based device has shown successful dual detection at temperatures down to 18 °C and relative humidity of 90%. For 0.1 ppm ammonia, it exhibited a p-type conduction with response and recovery times of 102 and 261 s, respectively; on the other hand, with NO (10 ppb, n-type), these times were 285 and 198 s, respectively. The device with 5 mg MWCNTs possesses a superior selectivity along with a relative response of ≈7% (5 ppb) and ≈5% (0.1 ppm) for NO and NH3, respectively, at 18 °C. The response is less affected by relative humidity, and this is attributed to the presence of MWCNTs that are hydrophobic in nature. Upon simultaneous exposure to NO (5-10 ppb) and NH3 (0.1-5 ppm), the response was dominated by NO, implying clear discrimination to the simultaneous presence of these two gases. We propose a sensing mechanism based on adsorption/desportion and accompanied charge transfer between the adsorbed gas molecules and sensing surface. The results suggest that an optimized weight ratio of WS2 and MWCNTs could govern favorable sensing conditions for a particular gas molecule.
Collapse
Affiliation(s)
- Sukhwinder Singh
- Department of Physics, Guru Nanak Dev University Amritsar, Punjab-143005, India
| | - Imtej Singh Saggu
- Department of Physics, Guru Nanak Dev University Amritsar, Punjab-143005, India
| | - Kaiwen Chen
- Department of Chemical and Biological Engineering, University at Buffalo (SUNY), Buffalo, New York 14260, United States
| | - Zhengxi Xuan
- Department of Chemical and Biological Engineering, University at Buffalo (SUNY), Buffalo, New York 14260, United States
| | - Mark T Swihart
- Department of Chemical and Biological Engineering, University at Buffalo (SUNY), Buffalo, New York 14260, United States
| | - Sandeep Sharma
- Department of Physics, Guru Nanak Dev University Amritsar, Punjab-143005, India
| |
Collapse
|
13
|
Sui N, Wei X, Cao S, Zhang P, Zhou T, Zhang T. Nanoscale Bimetallic AuPt-Functionalized Metal Oxide Chemiresistors: Ppb-Level and Selective Detection for Ozone and Acetone. ACS Sens 2022; 7:2178-2187. [PMID: 35901277 DOI: 10.1021/acssensors.2c00214] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
As the most widely used gas sensors, metal oxide semiconductor (MOS)-based chemiresistors have been facing great challenges in achieving ppb-level and selective detection of the target gas. The rational design and employment of bimetallic nanocatalysts (NCs) are expected to address this issue. In this work, the well-shaped and monodispersed AuPt NCs (diameter ≈ 9 nm) were functionalized on one-dimensional (1D) In2O3 nanofibers (NFs) to construct efficient gas sensors. The sensor demonstrated dual-selective and ppb-level detection for ozone (O3) and acetone (C3H6O) at different optimal working temperatures. For the possible application exploitation, a circuit was designed to monitor O3 concentration and provide warnings when the concentration safety limit (50 ppb) was exceeded. Moreover, simulated exhaled breath measurements were also carried out to diagnose diabetes through C3H6O concentration. The selective detection for O3 and C3H6O was further analyzed by principal component analysis (PCA). The drastically enhanced sensing performances were attributed to the synergistic catalytic effect of AuPt NCs. Both the "spillover effect" and the Schottky barrier at the interfaces of AuPt NCs and In2O3 NFs promoted the sensing processes of O3 and C3H6O.
Collapse
Affiliation(s)
- Ning Sui
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| | - Xiao Wei
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| | - Shuang Cao
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| | - Peng Zhang
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| | - Tingting Zhou
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| | - Tong Zhang
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012, P. R. China
| |
Collapse
|
14
|
Li B, Zhang X, Huo L, Gao S, Guo C, Zhang Y, Major Z, Zhang F, Cheng X, Xu Y. Controllable construction of ZnFe 2O 4-based micro-nano heterostructure for the rapid detection and degradation of VOCs. JOURNAL OF HAZARDOUS MATERIALS 2022; 435:129005. [PMID: 35500342 DOI: 10.1016/j.jhazmat.2022.129005] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2022] [Revised: 04/10/2022] [Accepted: 04/21/2022] [Indexed: 06/14/2023]
Abstract
Micro-nano heterogeneous oxides have received extensive attention due to their distinctive physicochemical properties. However, it is a challenge to prepare the hierarchical multicomponent metal oxide nanomaterials with abundant heterogeneous interfaces in a controllable way. In this work, the effective construction of the heterogeneous structure of the material is achieved by regulating the ratio of metal salts under thermal solvent condition. Three-dimensional spheres (ZnFe2O4) constructed by zero-dimensional ultra-small nanoparticles, in particular three-dimensional hollow sea urchin spheres (ZnO/ZnFe2O4) constructed by one-dimensional nanorods and three-dimensional hydrangeas (α-Fe2O3/ZnFe2O4) assembled by two-dimensional nanosheets were obtained. The two composite materials contain a large number of heterojunctions, which enhances the sensitivity of material to volatile organic compounds gas. Among them, the α-Fe2O3/ZnFe2O4 composite shows the best sensing performance for VOCs. For example, its response to 100 ppm acetone reaches 142 at 170 °C with the response time shortened to 3 s and the detection limit falling to 10 ppb. Meanwhile, the composite material presents a degradation rate of more than 90% for VOCs at a flow rate of 20 mL/min at 170 °C. In addition, the sensing and sensitivity mechanism of the composite material are studied in detail by combining GC-MS, XPS with UV diffuse reflectance tests.
Collapse
Affiliation(s)
- Baosheng Li
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Xianfa Zhang
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Lihua Huo
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Shan Gao
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Chuanyu Guo
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Yu Zhang
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China
| | - Zoltán Major
- Institute of Polymer Product Engineering, Johannes Kepler University Linz, Austria
| | - Fangdou Zhang
- College of Science, China University of Petroleum (East China), Qingdao 266580, China
| | - Xiaoli Cheng
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China.
| | - Yingming Xu
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080, China.
| |
Collapse
|
15
|
Khandelwal G, Dahiya R. Self-Powered Active Sensing Based on Triboelectric Generators. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2200724. [PMID: 35445458 DOI: 10.1002/adma.202200724] [Citation(s) in RCA: 17] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/23/2022] [Revised: 04/12/2022] [Indexed: 06/14/2023]
Abstract
The demand for portable and wearable chemical or biosensors and their expeditious development in recent years has created a scientific challenge in terms of their continuous powering. As a result, mechanical energy harvesters such as piezoelectric and triboelectric generators (TEGs) have been explored recently either as sensors or harvesters to store charge in small, but long-life, energy-storage devices to power the sensors. The use of energy harvesters as sensors is particularly interesting, as with such multifunctional operations it is possible to reduce the number devices needed in a system, which also helps overcome the integration complexities. In this regard, TEGs are promising, particularly for energy autonomous chemical and biological sensors, as they can be developed with a wide variety of materials, and their mechanical energy to electricity conversion can be modulated by various analytes. This review focuses on this interesting dimension of TEGs and presents various self-powered active chemical and biological sensors. A brief discussion about the development of TEG-based physical, magnetic, and optical sensors is also included. The influence of environmental factors, various figures of merit, and the significance of TEG design are explained in context with the active sensing. Finally, the key applications, challenges, and future perspective of chemical and biological detection via TEGs are discussed with a view to drive further advances in the field of self-powered sensors.
Collapse
Affiliation(s)
- Gaurav Khandelwal
- Bendable Electronics and Sensing Technologies (BEST) Group, James Watt South Building, School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK
| | - Ravinder Dahiya
- Bendable Electronics and Sensing Technologies (BEST) Group, James Watt South Building, School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK
| |
Collapse
|
16
|
Liu L, Wang Y, Liu Y, Wang S, Li T, Feng S, Qin S, Zhang T. Heteronanostructural metal oxide-based gas microsensors. MICROSYSTEMS & NANOENGINEERING 2022; 8:85. [PMID: 35911378 PMCID: PMC9329395 DOI: 10.1038/s41378-022-00410-1] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/21/2021] [Revised: 04/16/2022] [Accepted: 05/20/2022] [Indexed: 06/15/2023]
Abstract
The development of high-performance, portable and miniaturized gas sensors has aroused increasing interest in the fields of environmental monitoring, security, medical diagnosis, and agriculture. Among different detection tools, metal oxide semiconductor (MOS)-based chemiresistive gas sensors are the most popular choice in commercial applications and have the advantages of high stability, low cost, and high sensitivity. One of the most important ways to further enhance the sensor performance is to construct MOS-based nanoscale heterojunctions (heteronanostructural MOSs) from MOS nanomaterials. However, the sensing mechanism of heteronanostructural MOS-based sensors is different from that of single MOS-based gas sensors in that it is fairly complex. The performance of the sensors is influenced by various parameters, including the physical and chemical properties of the sensing materials (e.g., grain size, density of defects, and oxygen vacancies of materials), working temperatures, and device structures. This review introduces several concepts in the design of high-performance gas sensors by analyzing the sensing mechanism of heteronanostructural MOS-based sensors. In addition, the influence of the geometric device structure determined by the interconnection between the sensing materials and the working electrodes is discussed. To systematically investigate the sensing behavior of the sensor, the general sensing mechanism of three typical types of geometric device structures based on different heteronanostructural materials are introduced and discussed in this review. This review will provide guidelines for readers studying the sensing mechanism of gas sensors and designing high-performance gas sensors in the future.
Collapse
Affiliation(s)
- Lin Liu
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
| | - Yingyi Wang
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
- Department of Health and Environmental Sciences, Xi’an Jiaotong-Liverpool University, Suzhou, Jiangsu China
| | - Yinhang Liu
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
- Department of Nano Science and Nano Technology Institute, University of Science and Technology of China, Suzhou, Jiangsu China
| | - Shuqi Wang
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
| | - Tie Li
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
| | - Simin Feng
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
| | - Sujie Qin
- Department of Health and Environmental Sciences, Xi’an Jiaotong-Liverpool University, Suzhou, Jiangsu China
| | - Ting Zhang
- i-Lab, Key Laboratory of Multifunctional Nanomaterials and Smart Systems, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
- Nano-X, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences (CAS), Suzhou, Jiangsu China
- School of Nano-Tech and Nano-Bionics, University of Science and Technology of China, Hefei, Anhui PR China
- Gusu Laboratory of Materials, Suzhou, Jiangsu PR China
- Center for Excellence in Brain Science and Intelligence Technology, Chinese Academy of Sciences, Shanghai, PR China
| |
Collapse
|
17
|
One-dimensional bimetallic PdRh alloy mesoporous nanotubes constructed for ultra-sensitive detection of carbamate pesticide. Anal Biochem 2022; 652:114726. [PMID: 35588856 DOI: 10.1016/j.ab.2022.114726] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/28/2022] [Revised: 05/03/2022] [Accepted: 05/07/2022] [Indexed: 11/24/2022]
Abstract
Bimetallic nanomaterials with various dimensions have been successfully explored in electrochemical biosensor to detect the carbamate pesticide. One-dimensional bimetallic nanomaterials with mesoporous, which possess bigger electrochemical active area, more catalytic active sites and faster electron transmission efficiency, may have excellent performance in electrochemical biosensor, but have been rarely reported. In order to confirm this hypothesis, one-dimensional PdRh alloy mesoporous nanotubes were prepared and applied as a platform for carbamate pesticide electrochemical detection. Upon optimum conditions, the constructed AChE sensor showed an ultrahigh sensitivity (0.279 μA/nM), a wide linear range (9.44 × 10-8 - 0.944 mg/L) and a low detection limit (9.44 × 10-8 mg/L) for carbaryl. And the biosensor exhibited outstanding anti-interference ability, precision and stability. Moreover, the actual sample detection of the biosensor has been demonstrated with a satisfactory recovery (94.01%-102.80%). The remarkable property may attribute to the integrated advantages of one-dimensional mesoporous structure and bimetallic alloy.
Collapse
|
18
|
Singh S, Deb J, Singh JV, Sarkar U, Sharma S. Highly Selective Ethyl Mercaptan Sensing Using a MoSe 2/SnO 2 Composite at Room Temperature. ACS APPLIED MATERIALS & INTERFACES 2022; 14:23916-23927. [PMID: 35548976 DOI: 10.1021/acsami.1c25112] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Volatile organic sulfur compounds (VOSCs) serve not only as biomarkers for dental diseases such as halitosis but also as a tracer for monitoring air quality. Room-temperature selective detection and superior sensitivity against VOSCs at a sub-ppm level has remained a challenging task. Here, we propose a heterostructure-based design using a MoSe2/SnO2 composite for achieving sensitive and selective detection of ethyl mercaptan at room temperature. The composite was synthesized via a facile two-step method. A composite-based device has shown detection down to 1 ppm of ethyl mercaptan over a wider range of relative humidity (40-90%). Notably, the composite has shown adsorption selectivity toward ethyl mercaptan compared to hydrogen sulfide and other reducing or oxidizing analytes. Moreover, a density functional theory (DFT) study has been performed to understand the adsorption selectivity, charge transfer, and modification in the electronic properties after molecule adsorption on the host surface. Simulations predicted the lowest negative adsorption energy for ethyl mercaptan, implying the chemisorption (-142.029 kJ mol-1) process of adsorption. The device thus-obtained has also shown a stable response even at an extreme relative humidity level of 90%. The obtained results and superior signal-to-noise ratio indicate that a MoSe2/SnO2-based sensor may be a promising candidate for highly selective and sensitive detection of ethyl mercaptan even below 1 ppm.
Collapse
Affiliation(s)
- Sukhwinder Singh
- Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005, India
| | - Jyotirmoy Deb
- Department of Physics, Assam University, Silchar 788011, India
| | - Jatinder Vir Singh
- Department of Pharmaceutical Sciences, Guru Nanak Dev University, Amritsar, Punjab 143005, India
| | - Utpal Sarkar
- Department of Physics, Assam University, Silchar 788011, India
| | - Sandeep Sharma
- Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005, India
| |
Collapse
|
19
|
Chemiresistive gas sensors based on electrospun semiconductor metal oxides: A review. Talanta 2022; 246:123527. [DOI: 10.1016/j.talanta.2022.123527] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/17/2022] [Revised: 04/30/2022] [Accepted: 05/02/2022] [Indexed: 11/24/2022]
|
20
|
Azhati A, Zhu H, Ouyang T, He T, Zeng Y, Wu P, Jiang J, Peng H, Che S. DNA-Assisted Creation of a Library of Ultrasmall Multimetal/Metal Oxide Nanoparticles Confined in Silica. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107123. [PMID: 35174966 DOI: 10.1002/smll.202107123] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/17/2021] [Revised: 01/05/2022] [Indexed: 06/14/2023]
Abstract
Supported ultrasmall metal/metal oxide nanoparticles (UMNPs) with sizes in the range of 1-5 nm exhibit unique properties in sensing, catalysis, biomedicine, etc. However, the metal-support and metal-metal precursor interactions were not as well controlled to stabilize the metal nanoparticles on/in the supports. Herein, DNA is chosen as a template and a ligand for the silica-supported UMNPs, taking full use of its binding ability to metal ions via either electrostatic or coordination interactions. UMNPs thus are highly dispersed in silica via self-assembly of DNA and DNA-metal ion interactions with the assistance of a co-structural directing agent (CSDA). A large number of metal ions are easily retained in the mesostructured DNA-silica materials, and their growth is controlled by the channels after calcination. Based on this directing concept, a material library, consisting of 50 mono- and 54 bicomponent UMNPs confined within silica and with narrow size distribution, is created. Theoretical calculation proves the indispensability of DNA with combination of several organics in the synthesis of ultrasmall metal nanoparticles. The Pt-silica and Pt/Ni-silica chosen from the library exhibit good catalytic performance for toluene combustion. This generalizable and straightforward synthesis strategy is expected to widen the corresponding applications of supported UMNPs.
Collapse
Affiliation(s)
- Arepati Azhati
- School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, State Key Laboratory of Composite Materials, Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, China
| | - Haiyin Zhu
- School of Physical Science and Technology, Shanghai Tech University, 100 Haike Road, Pudong, Shanghai, 201210, China
| | - Tianwei Ouyang
- School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, State Key Laboratory of Composite Materials, Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, China
| | - Tianyao He
- School of Resources Environmental and Chemical Engineering, Nanchang University, 999 Xuefu Road, Nanchang, Jiangxi, 330031, China
| | - Yifei Zeng
- School of Chemical Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| | - Peng Wu
- Shanghai Key Laboratory of Green Chemical Science and Chemical Process, School of Chemistry and Molecular Engineering, East China Normal University, 3663 North Zhongshan Road, Shanghai, 200062, China
| | - Jingang Jiang
- Shanghai Key Laboratory of Green Chemical Science and Chemical Process, School of Chemistry and Molecular Engineering, East China Normal University, 3663 North Zhongshan Road, Shanghai, 200062, China
| | - Honggen Peng
- School of Resources Environmental and Chemical Engineering, Nanchang University, 999 Xuefu Road, Nanchang, Jiangxi, 330031, China
| | - Shunai Che
- School of Chemistry and Chemical Engineering, Frontiers Science Center for Transformative Molecules, State Key Laboratory of Composite Materials, Shanghai Key Laboratory for Molecular Engineering of Chiral Drugs, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, China
- School of Chemical Science and Engineering, Tongji University, 1239 Siping Road, Shanghai, 200092, China
| |
Collapse
|
21
|
Kaur N, Sharma P, Aditya A, Shanavas A. Taking leads out of nature, can nano deliver us from COVID-like pandemics? Biomed Phys Eng Express 2022; 8. [PMID: 35078168 DOI: 10.1088/2057-1976/ac4ec8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/19/2021] [Accepted: 01/25/2022] [Indexed: 11/11/2022]
Abstract
The COVID-19 crisis has alerted the research community to re-purpose scientific tools that can effectively manage emergency pandemic situations. Researchers were never so desperate to discover a 'magic bullet' that has significant clinical benefits with minimal or no side effects. At the beginning of the pandemic, due to restricted access to traditional laboratory techniques, many research groups delved into computational screening of thousands of lead molecules that could inhibit SARS-CoV-2 at one or more stages of its infectious cycle. Several in silico studies on natural derivatives point out their potency against SARS-CoV-2 proteins. However, theoretical predictions and existing knowledge on related molecules reflect their poor oral bioavailability due to biotransformation in the gut and liver. Nanotechnology has evolved into a key field for precise and controlled delivery of various drugs that lack aqueous solubility, have low oral bioavailability and possess pronounced toxicity in their native form. In this review, we discuss various nanoformulations of natural products with favorable ADME properties, and also briefly explore nano-drug delivery to lungs, the primary site of SARS-CoV-2 infection. Natural products are also envisioned to augment nanotechnology-based 1) personnel protective equipment for ex vivo viral inactivation and 2) wearable sensors that perform rapid and non-invasive analysis of volatile organic compounds in exhaled breath of the infected person after therapeutic food consumption.
Collapse
Affiliation(s)
- Navneet Kaur
- Institute of Nano Science and Technology, Sector 81, Knowledge city, Mohali, 140306, INDIA
| | - Priyanka Sharma
- Institute of Nano Science and Technology, Sector 81, Knowledge city, Mohali, 140306, INDIA
| | - Adrija Aditya
- Institute of Nano Science and Technology, Sector 81, Knowledge city, Mohali, 140306, INDIA
| | - Asifkhan Shanavas
- Institute of Nano Science and Technology, Sector 81, Knowledge city, Mohali, 140306, INDIA
| |
Collapse
|
22
|
Choi SH, Lee JS, Choi WJ, Seo JW, Choi SJ. Nanomaterials for IoT Sensing Platforms and Point-of-Care Applications in South Korea. SENSORS (BASEL, SWITZERLAND) 2022; 22:610. [PMID: 35062576 PMCID: PMC8781063 DOI: 10.3390/s22020610] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/23/2021] [Revised: 01/07/2022] [Accepted: 01/08/2022] [Indexed: 05/03/2023]
Abstract
Herein, state-of-the-art research advances in South Korea regarding the development of chemical sensing materials and fully integrated Internet of Things (IoT) sensing platforms were comprehensively reviewed for verifying the applicability of such sensing systems in point-of-care testing (POCT). Various organic/inorganic nanomaterials were synthesized and characterized to understand their fundamental chemical sensing mechanisms upon exposure to target analytes. Moreover, the applicability of nanomaterials integrated with IoT-based signal transducers for the real-time and on-site analysis of chemical species was verified. In this review, we focused on the development of noble nanostructures and signal transduction techniques for use in IoT sensing platforms, and based on their applications, such systems were classified into gas sensors, ion sensors, and biosensors. A future perspective for the development of chemical sensors was discussed for application to next-generation POCT systems that facilitate rapid and multiplexed screening of various analytes.
Collapse
Affiliation(s)
- Seung-Ho Choi
- Division of Materials of Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea; (S.-H.C.); (J.-S.L.); (W.-J.C.); (J.-W.S.)
| | - Joon-Seok Lee
- Division of Materials of Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea; (S.-H.C.); (J.-S.L.); (W.-J.C.); (J.-W.S.)
| | - Won-Jun Choi
- Division of Materials of Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea; (S.-H.C.); (J.-S.L.); (W.-J.C.); (J.-W.S.)
| | - Jae-Woo Seo
- Division of Materials of Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea; (S.-H.C.); (J.-S.L.); (W.-J.C.); (J.-W.S.)
| | - Seon-Jin Choi
- Division of Materials of Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea; (S.-H.C.); (J.-S.L.); (W.-J.C.); (J.-W.S.)
- Institute of Nano Science and Technology, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Korea
| |
Collapse
|
23
|
Kim DH, Cha JH, Shim G, Kim YH, Jang JS, Shin H, Ahn J, Choi SY, Kim ID. Flash-thermochemical engineering of phase and surface activity on metal oxides. Chem 2022. [DOI: 10.1016/j.chempr.2021.12.003] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
|
24
|
Liu Y, Zeng S, Ji W, Yao H, Lin L, Cui H, Santos HA, Pan G. Emerging Theranostic Nanomaterials in Diabetes and Its Complications. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2102466. [PMID: 34825525 PMCID: PMC8787437 DOI: 10.1002/advs.202102466] [Citation(s) in RCA: 27] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/11/2021] [Revised: 09/03/2021] [Indexed: 05/14/2023]
Abstract
Diabetes mellitus (DM) refers to a group of metabolic disorders that are characterized by hyperglycemia. Oral subcutaneously administered antidiabetic drugs such as insulin, glipalamide, and metformin can temporarily balance blood sugar levels, however, long-term administration of these therapies is associated with undesirable side effects on the kidney and liver. In addition, due to overproduction of reactive oxygen species and hyperglycemia-induced macrovascular system damage, diabetics have an increased risk of complications. Fortunately, recent advances in nanomaterials have provided new opportunities for diabetes therapy and diagnosis. This review provides a panoramic overview of the current nanomaterials for the detection of diabetic biomarkers and diabetes treatment. Apart from diabetic sensing mechanisms and antidiabetic activities, the applications of these bioengineered nanoparticles for preventing several diabetic complications are elucidated. This review provides an overall perspective in this field, including current challenges and future trends, which may be helpful in informing the development of novel nanomaterials with new functions and properties for diabetes diagnosis and therapy.
Collapse
Affiliation(s)
- Yuntao Liu
- School of Food & Biological EngineeringJiangsu UniversityZhenjiang212013China
- College of Food ScienceSichuan Agricultural UniversityYaan625014China
| | - Siqi Zeng
- College of Food ScienceSichuan Agricultural UniversityYaan625014China
| | - Wei Ji
- Department of PharmaceuticsSchool of PharmacyJiangsu UniversityZhenjiangJiangsu212013China
| | - Huan Yao
- Sichuan Institute of Food InspectionChengdu610097China
| | - Lin Lin
- School of Food & Biological EngineeringJiangsu UniversityZhenjiang212013China
| | - Haiying Cui
- School of Food & Biological EngineeringJiangsu UniversityZhenjiang212013China
| | - Hélder A. Santos
- Drug Research ProgramDivision of Pharmaceutical Chemistry and TechnologyFaculty of PharmacyUniversity of HelsinkiHelsinkiFI‐00014Finland
- Department of Biomedical Engineering and W.J. Kolff Institute for Biomedical Engineering and Materials ScienceUniversity of Groningen/University Medical Center GroningenAnt. Deusinglaan 1Groningen9713 AVThe Netherlands
| | - Guoqing Pan
- Institute for Advanced MaterialsSchool of Materials Science and EngineeringJiangsu UniversityZhenjiangJiangsu212013China
| |
Collapse
|
25
|
Liu B, Zhang L, Luo Y, Gao L, Duan G. The Dehydrogenation of H-S Bond into Sulfur Species on Supported Pd Single Atoms Allows Highly Selective and Sensitive Hydrogen Sulfide Detection. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2105643. [PMID: 34716747 DOI: 10.1002/smll.202105643] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2021] [Revised: 09/27/2021] [Indexed: 06/13/2023]
Abstract
The supported metal catalysts on scaffolds usually reveal multiple active sites, resulting in the occurrence of side reaction and being detrimental to the achievement of highly consistent catalysis. Single atom catalysts (SACs), possessed with highly consistent single active sites, have great potentials for overcoming such issues. Herein, the authors used SACs to modulate kinetic process of gas sensitive reaction. The supported Pd SACs, established by a metal organic frameworks-templated approach, promoted greatly the detection capacity to hydrogen sulfide (H2 S) gas with a very high sensitivity and selectivity. Density functional theory calculations show that the supported Pd SACs not only increased the number of electrons transferring from H2 S molecules to Pd SACs, but strengthened surface affinity to H2 S. Moreover, the HS bonds of H2 S molecules absorbed on Pd atomic sites are more likely to be dehydrogenated directly into sulfur species. Significantly, quasi in situ XPS analysis confirmed the presence of sulfur species during H2 S detection process, which may be a major cause for such detection signal. Based on these results, a suitable sensing principle for H2 S gas driven by Pd SACs was put forward. This work will enrich catalytic electronics in chemiresistive gas sensing.
Collapse
Affiliation(s)
- Bo Liu
- Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China
| | - Linjuan Zhang
- Key Laboratory of Interfacial Physics and Technology, Shanghai Institute of Applied Physics, Chinese Academy of Science, Shanghai, 201800, P. R. China
| | - Yuanyuan Luo
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Science, Hefei, 230031, P. R. China
| | - Lei Gao
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Science, Hefei, 230031, P. R. China
| | - Guotao Duan
- Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China
| |
Collapse
|
26
|
Han HJ, Cho SH, Han S, Jang JS, Lee GR, Cho EN, Kim SJ, Kim ID, Jang MS, Tuller HL, Cha JJ, Jung YS. Synergistic Integration of Chemo-Resistive and SERS Sensing for Label-Free Multiplex Gas Detection. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2105199. [PMID: 34569647 DOI: 10.1002/adma.202105199] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/06/2021] [Indexed: 06/13/2023]
Abstract
Practical sensing applications such as real-time safety alerts and clinical diagnoses require sensor devices to differentiate between various target molecules with high sensitivity and selectivity, yet conventional devices such as oxide-based chemo-resistive sensors and metal-based surface-enhanced Raman spectroscopy (SERS) sensors usually do not satisfy such requirements. Here, a label-free, chemo-resistive/SERS multimodal sensor based on a systematically assembled 3D cross-point multifunctional nanoarchitecture (3D-CMA), which has unusually strong enhancements in both "chemo-resistive" and "SERS" sensing characteristics is introduced. 3D-CMA combines several sensing mechanisms and sensing elements via 3D integration of semiconducting SnO2 nanowire frameworks and dual-functioning Au metallic nanoparticles. It is shown that the multimodal sensor can successfully estimate mixed-gas compositions selectively and quantitatively at the sub-100 ppm level, even for mixtures of gaseous aromatic compounds (nitrobenzene and toluene) with very similar molecular structures. This is enabled by combined chemo-resistive and SERS multimodal sensing providing complementary information.
Collapse
Affiliation(s)
- Hyeuk Jin Han
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Department of Mechanical Engineering and Materials Science, Yale University, New Haven, CT, 06511, USA
- Energy Sciences Institute, Yale West Campus, West Haven, CT, 06516, USA
| | - Seunghee H Cho
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Sangjun Han
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Ji-Soo Jang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Center for Electronic Materials, Korea Institute of Science and Technology, Seoul 136-791, Republic of Korea
| | - Gyu Rac Lee
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Eugene N Cho
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Sang-Joon Kim
- Environment and Sustainable Resources Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon, 34114, Republic of Korea
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Min Seok Jang
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Harry L Tuller
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Judy J Cha
- Department of Mechanical Engineering and Materials Science, Yale University, New Haven, CT, 06511, USA
- Energy Sciences Institute, Yale West Campus, West Haven, CT, 06516, USA
| | - Yeon Sik Jung
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| |
Collapse
|
27
|
Shin H, Kim DH, Jung W, Jang JS, Kim YH, Lee Y, Chang K, Lee J, Park J, Namkoong K, Kim ID. Surface Activity-Tuned Metal Oxide Chemiresistor: Toward Direct and Quantitative Halitosis Diagnosis. ACS NANO 2021; 15:14207-14217. [PMID: 34170113 DOI: 10.1021/acsnano.1c01350] [Citation(s) in RCA: 40] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Continuous monitoring of hydrogen sulfide (H2S) in human breath for early stage diagnosis of halitosis is of great significance for prevention of dental diseases. However, fabrication of a highly selective and sensitive H2S gas sensor material still remains a challenge, and direct analysis of real breath samples has not been properly attempted, to the best of our knowledge. To address the issue, herein, we introduce facile cofunctionalization of WO3 nanofibers with alkaline metal (Na) and noble metal (Pt) catalysts via the simple addition of sodium chloride (NaCl) and Pt nanoparticles (NPs), followed by electrospinning process. The Na-doping and Pt NPs decoration in WO3 grains induces the partial evolution of the Na2W4O13 phase, causing the buildup of Pt/Na2W4O13/WO3 multi-interface heterojunctions that selectively interacts with sulfur-containing species. As a result, we achieved the highest-ranked sensing performances, that is, response (Rair/Rgas) = 780 @ 1 ppm and selectivity (RH2S/REtOH) = 277 against 1 ppm ethanol, among the chemiresistor-based H2S sensors, owing to the synergistic chemical and electronic sensitization effects of the Pt NP/Na compound cocatalysts. The as-prepared sensing layer was proven to be practically effective for direct, and quantitative halitosis analysis based on the correlation (accuracy = 86.3%) between the H2S concentration measured using the direct breath signals obtained by our test device (80 cases) and gas chromatography. This study offers possibilities for direct, highly reliable and rapid detection of H2S in real human breath without the need of any collection or filtering equipment.
Collapse
Affiliation(s)
- Hamin Shin
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-Virus & Air-Quality Control, KI Nanocentury, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Dong-Ha Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-Virus & Air-Quality Control, KI Nanocentury, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Wonjong Jung
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Ji-Soo Jang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-Virus & Air-Quality Control, KI Nanocentury, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Department of Chemical and Environmental Engineering, Yale University, New Haven, Connecticut 06520-8286, United States
| | - Yoon Hwa Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-Virus & Air-Quality Control, KI Nanocentury, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Yeolho Lee
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Kiyoung Chang
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Joonhyung Lee
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Jongae Park
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Kak Namkoong
- Healthcare Sensor Lab., Device Research Center, Samsung Advanced Institute of Technology, Samsung Electronics Co., Ltd., 130 Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do 16678, Republic of Korea
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-Virus & Air-Quality Control, KI Nanocentury, KAIST, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
28
|
Park C, Koo WT, Chong S, Shin H, Kim YH, Cho HJ, Jang JS, Kim DH, Lee J, Park S, Ko J, Kim J, Kim ID. Confinement of Ultrasmall Bimetallic Nanoparticles in Conductive Metal-Organic Frameworks via Site-Specific Nucleation. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2101216. [PMID: 34342046 DOI: 10.1002/adma.202101216] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/11/2021] [Revised: 05/03/2021] [Indexed: 06/13/2023]
Abstract
Conductive metal-organic frameworks (cMOFs) are emerging materials for various applications due to their high surface area, high porosity, and electrical conductivity. However, it is still challenging to develop cMOFs having high surface reactivity and durability. Here, highly active and stable cMOF are presented via the confinement of bimetallic nanoparticles (BNPs) in the pores of a 2D cMOF, where the confinement is guided by dipolar-interaction-induced site-specific nucleation. Heterogeneous metal precursors are bound to the pores of 2D cMOFs by dipolar interactions, and the subsequent reduction produces ultrasmall (≈1.54 nm) and well-dispersed PtRu NPs confined in the pores of the cMOF. PtRu-NP-decorated cMOFs exhibit significantly enhanced chemiresistive NO2 sensing performances, owing to the bimetallic synergies of PtRu NPs and the high surface area and porosity of cMOF. The approach paves the way for the synthesis of highly active and conductive porous materials via bimetallic and/or multimetallic NP loading.
Collapse
Affiliation(s)
- Chungseong Park
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Won-Tae Koo
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Sanggyu Chong
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Hamin Shin
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Yoon Hwa Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Hee-Jin Cho
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Ji-Soo Jang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Dong-Ha Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jiyoung Lee
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Seyeon Park
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jaehyun Ko
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jihan Kim
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus and Air-quality Control, KAIST Institute for Nanocentury, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| |
Collapse
|
29
|
Jian Y, Qu D, Guo L, Zhu Y, Su C, Feng H, Zhang G, Zhang J, Wu W, Yao MS. The prior rules of designing Ti3C2Tx MXene-based gas sensors. Front Chem Sci Eng 2021. [DOI: 10.1007/s11705-020-2013-y] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
30
|
|
31
|
Kim DH, Cha JH, Lim JY, Bae J, Lee W, Yoon KR, Kim C, Jang JS, Hwang W, Kim ID. Colorimetric Dye-Loaded Nanofiber Yarn: Eye-Readable and Weavable Gas Sensing Platform. ACS NANO 2020; 14:16907-16918. [PMID: 33275412 DOI: 10.1021/acsnano.0c05916] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
The colorimetric gas sensor offers an opportunity for the simple and rapid detection of toxic gaseous substances based on visually discernible changes in the color of the sensing material. In particular, the accurate detection of trace amounts of certain biomarkers in a patient's breath provides substantial clues regarding specific diseases, for example, hydrogen sulfide (H2S) for halitosis and ammonia (NH3) for kidney disorder. However, conventional colorimetric sensors often lack the sensitivity, selectivity, detection limit, and mass-productivity, impeding their commercialization. Herein, we report an inexpensive route for the meter-scale synthesis of a colorimetric sensor based on a composite nanofiber yarn that is chemically functionalized with an ionic liquid as an effective H2S adsorbent and lead acetate as a colorimetric dye. As an eye-readable and weavable sensing platform, the single-strand yarn exhibits enhanced sensitivity supported by its high surface area and well-developed porosity to detect the breath biomarker (1 ppm of H2S). Alternatively, the yarn loaded with lead iodide dyes could reversibly detect NH3 gas molecules in the ppm-level, demonstrating the facile extensibility. Finally, we demonstrated that the freestanding yarns could be sewn into patterned textiles for the fabrication of a wearable toxic gas alarm system with a visual output.
Collapse
Affiliation(s)
- Dong-Ha Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus & Air-quality Control, KAIST Institute Nanocentury, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Jun-Hwe Cha
- Department of Electrical Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yusenong-gu, Daejeon 305-701, Republic of Korea
| | - Jee Young Lim
- Advanced Textile R&D Department, Korea Institute of Industrial Technology (KITECH), 143, Hanggaul-ro, Sangnok-gu, Ansan-si, Gyeonggi-do 15588, Republic of Korea
| | - Jaehyeong Bae
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus & Air-quality Control, KAIST Institute Nanocentury, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Woosung Lee
- Advanced Textile R&D Department, Korea Institute of Industrial Technology (KITECH), 143, Hanggaul-ro, Sangnok-gu, Ansan-si, Gyeonggi-do 15588, Republic of Korea
| | - Ki Ro Yoon
- Advanced Textile R&D Department, Korea Institute of Industrial Technology (KITECH), 143, Hanggaul-ro, Sangnok-gu, Ansan-si, Gyeonggi-do 15588, Republic of Korea
| | - Chanhoon Kim
- Sustainable Technology and Wellness R&D Group, Korea Institute of Industrial Technology (KITECH), 102 Jejudaehak-ro, Jeju-si, Jeju-do 63243, Republic of Korea
| | - Ji-Soo Jang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus & Air-quality Control, KAIST Institute Nanocentury, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Wontae Hwang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus & Air-quality Control, KAIST Institute Nanocentury, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
- Membrane Innovation Center for Anti-virus & Air-quality Control, KAIST Institute Nanocentury, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
32
|
Vajhadin F, Mazloum-Ardakani M, Amini A. Metal oxide-based gas sensors for detection of exhaled breath markers. MEDICAL DEVICES & SENSORS 2020; 4:e10161. [PMID: 33615149 PMCID: PMC7883254 DOI: 10.1002/mds3.10161] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Exhaled breath test is a typical disease monitoring method for replacing blood and urine samples that may create discomfort for patients. To monitor exhaled breath markers, gas biomedical sensors have undergone rapid progress for non‐invasive and point‐of‐care diagnostic devices. Among gas sensors, metal oxide‐based biomedical gas sensors have received remarkable attention owing to their unique properties, such as high sensitivity, simple fabrication, miniaturization, portability and real‐time monitoring. Herein, we reviewed the recent advances in chemoresistive metal oxide‐based gas sensors with ZnO, SnO2 and In2O3 as sensing materials for monitoring a range of exhaled breath markers (i.e., NO, H2, H2S, acetone, isoprene and formaldehyde). We focused on the strategies that improve the sensitivity and selectivity of metal oxide‐based gas sensors. The challenges to fabricate a functional gas sensor with high sensing performance along with suggestions are outlined.
Collapse
Affiliation(s)
- Fereshteh Vajhadin
- Department of Chemistry Faculty of Science Yazd University Yazd 89195-741 Iran
| | | | - Abass Amini
- Department of Mechanical Engineering Australian College of Kuwait Safat 13015 Kuwait
| |
Collapse
|
33
|
Ziegler JM, Andoni I, Choi EJ, Fang L, Flores-Zuleta H, Humphrey NJ, Kim DH, Shin J, Youn H, Penner RM. Sensors Based Upon Nanowires, Nanotubes, and Nanoribbons: 2016-2020. Anal Chem 2020; 93:124-166. [PMID: 33242951 DOI: 10.1021/acs.analchem.0c04476] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Affiliation(s)
- Joshua M Ziegler
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| | - Ilektra Andoni
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| | - Eric J Choi
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| | - Lu Fang
- Department of Automation, Hangzhou Dianzi University, 1158 Second Street, Xiasha, Hangzhou 310018, China
| | - Heriberto Flores-Zuleta
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| | - Nicholas J Humphrey
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| | - Dong-Hwan Kim
- School of Chemical Engineering, Sungkyunkwan University, Seobu-ro 2066, Jangan-gu Suwon, Gyeonggi-do 16419, South Korea
| | - Jihoon Shin
- School of Chemical Engineering, Sungkyunkwan University, Seobu-ro 2066, Jangan-gu Suwon, Gyeonggi-do 16419, South Korea
| | - Hyunho Youn
- School of Chemical Engineering, Sungkyunkwan University, Seobu-ro 2066, Jangan-gu Suwon, Gyeonggi-do 16419, South Korea
| | - Reginald M Penner
- Department of Chemistry, University of California, Irvine, Irvine, California 92697, United States
| |
Collapse
|
34
|
Koo WT, Cho HJ, Kim DH, Kim YH, Shin H, Penner RM, Kim ID. Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges. ACS NANO 2020; 14:14284-14322. [PMID: 33124428 DOI: 10.1021/acsnano.0c05307] [Citation(s) in RCA: 53] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Hydrogen (H2) is one of the next-generation energy sources because it is abundant in nature and has a high combustion efficiency that produces environmentally benign products (H2O). However, H2/air mixtures are explosive at H2 concentrations above 4%, thus any leakage of H2 must be rapidly and reliably detected at much lower concentrations to ensure safety. Among the various types of H2 sensors, chemiresistive sensors are one of the most promising sensing systems due to their simplicity and low cost. This review highlights the advances in H2 chemiresistors, including metal-, semiconducting metal oxide-, carbon-based materials, and other materials. The underlying sensing mechanisms for different types of materials are discussed, and the correlation of sensing performances with nanostructures, surface chemistry, and electronic properties is presented. In addition, the discussion of each material emphasizes key advances and strategies to develop superior H2 sensors. Furthermore, recent key advances in other types of H2 sensors are briefly discussed. Finally, the review concludes with a brief outlook, perspective, and future directions.
Collapse
Affiliation(s)
- Won-Tae Koo
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Hee-Jin Cho
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Dong-Ha Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Yoon Hwa Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Hamin Shin
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Reginald M Penner
- Department of Chemistry, University of California, Irvine, California 92697-2025, United States
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
35
|
Ma J, Li Y, Zhou X, Yang X, Alharthi FA, Alghamdi AA, Cheng X, Deng Y. Au Nanoparticles Decorated Mesoporous SiO 2 -WO 3 Hybrid Materials with Improved Pore Connectivity for Ultratrace Ethanol Detection at Low Operating Temperature. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2020; 16:e2004772. [PMID: 33107204 DOI: 10.1002/smll.202004772] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/05/2020] [Revised: 09/04/2020] [Indexed: 05/23/2023]
Abstract
Semiconducting metal oxides-based gas sensors with the capability to detect trace gases at low operating temperatures are highly desired in applications such as wearable devices, trace pollutant detection, and exhaled breath analysis, but it still remains a great challenge to realize this goal. Herein, a multi-component co-assembly method in combination with pore engineering strategy is proposed. By using bi-functional (3-mercaptopropyl) trimethoxysilane (MPTMS) that can co-hydrolyze with transition metal salt and meanwhile coordinate with gold precursor during their co-assembly with PEO-b-PS copolymers, ordered mesoporous SiO2 -WO3 composites with highly dispersed Au nanoparticles of 5 nm (mesoporous SiO2 -WO3 /Au) are straightforward synthesized. This multi-component co-assembly process avoids the aggregation of Au nanoparticles and pore blocking in conventional post-loading method. Furthermore, through controlled etching treatment, a small portion of silica can be removed from the pore wall, resulting in mesoporous SiO2 -WO3 /Au with increased specific surface area (129 m2 g-1 ), significantly improved pore connectivity, and enlarged pore window (>4.3 nm). Thanks to the presence of well-confined Au nanoparticles and ε-WO3 , the mesoporous SiO2 -WO3 /Au based gas sensors exhibit excellent sensing performance toward ethanol with high sensitivity (Ra /Rg = 2-14 to 50-250 ppb) at low operating temperature (150 °C).
Collapse
Affiliation(s)
- Junhao Ma
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
| | - Yanyan Li
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
| | - Xinran Zhou
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
| | - Xuanyu Yang
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
| | - Fahad A Alharthi
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh, 11451, Saudi Arabia
| | - Abdulaziz A Alghamdi
- Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh, 11451, Saudi Arabia
| | - Xiaowei Cheng
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
| | - Yonghui Deng
- Department of Chemistry, State Key Laboratory of Molecular Engineering of Polymers, Fudan University, Shanghai, 200433, China
- Department of Gastroenterology, Zhongshan Hospital of Fudan University, Shanghai, 200433, China
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai, 200050, China
| |
Collapse
|
36
|
Zheng L, Xie J, Liu X, Yang C, Zheng W, Zhang J. Unveiling the Electronic Interaction in ZnO/PtO/Pt Nanoarrays for Catalytic Detection of Triethylamine with Ultrahigh Sensitivity. ACS APPLIED MATERIALS & INTERFACES 2020; 12:46267-46276. [PMID: 32929964 DOI: 10.1021/acsami.0c09130] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The detection of harmful volatile organic compounds is of great significance to environmental quality and human health. However, it still remains a challenge to achieve high detection sensitivity at a relatively low temperature. Herein, an ultrasensitive catalytic sensor for the detection of triethylamine (TEA) based on ZnO/PtO/Pt nanoarray thin films was realized. Sensor measurements reveal that the PtO/Pt sensitizer dramatically reduces the working temperature from 195 °C of a pristine ZnO sensor to 125 °C of ZnO/PtO/Pt sensors. The ZnO/PtO/Pt sensors exhibit an extremely high response of 3513 to 50 ppm TEA, which is three orders of magnitude higher than that of pristine ZnO. Meanwhile, an ultralow limit of detection of 8.3 ppb is achieved. The outstanding performances are superior to those in most previous reports on TEA detection. Mechanistic investigations reveal that the outstanding performances are ascribed to the strong electronic interaction between PtO and ZnO and the catalytic spillover effect of Pt.
Collapse
Affiliation(s)
- Lingli Zheng
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
| | - Jiayue Xie
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
| | - Xianghong Liu
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071, China
| | - Chen Yang
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
| | - Wei Zheng
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
| | - Jun Zhang
- College of Physics, Center for Marine Observation and Communications, Qingdao University, Qingdao 266071, China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071, China
| |
Collapse
|
37
|
Shin H, Jung WG, Kim DH, Jang JS, Kim YH, Koo WT, Bae J, Park C, Cho SH, Kim BJ, Kim ID. Single-Atom Pt Stabilized on One-Dimensional Nanostructure Support via Carbon Nitride/SnO 2 Heterojunction Trapping. ACS NANO 2020; 14:11394-11405. [PMID: 32833436 DOI: 10.1021/acsnano.0c03687] [Citation(s) in RCA: 39] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Catalysis with single-atom catalysts (SACs) exhibits outstanding reactivity and selectivity. However, fabrication of supports for the single atoms with structural versatility remains a challenge to be overcome, for further steps toward catalytic activity augmentation. Here, we demonstrate an effective synthetic approach for a Pt SAC stabilized on a controllable one-dimensional (1D) metal oxide nano-heterostructure support, by trapping the single atoms at heterojunctions of a carbon nitride/SnO2 heterostructure. With the ultrahigh specific surface area (54.29 m2 g-1) of the nanostructure, we obtained maximized catalytic active sites, as well as further catalytic enhancement achieved with the heterojunction between carbon nitride and SnO2. X-ray absorption fine structure analysis and HAADF-STEM analysis reveal a homogeneous atomic dispersion of Pt species between carbon nitride and SnO2 nanograins. This Pt SAC system with the 1D nano-heterostructure support exhibits high sensitivity and selectivity toward detection of formaldehyde gas among state-of-the-art gas sensors. Further ex situ TEM analysis confirms excellent thermal stability and sinter resistance of the heterojunction-immobilized Pt single atoms.
Collapse
Affiliation(s)
- Hamin Shin
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Wan-Gil Jung
- School of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea
| | - Dong-Ha Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Ji-Soo Jang
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Yoon Hwa Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Won-Tae Koo
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Jaehyeong Bae
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Chungseong Park
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Su-Ho Cho
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Bong Joong Kim
- School of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdangwagi-ro, Buk-gu, Gwangju 61005, Republic of Korea
| | - Il-Doo Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
38
|
Dai T, Meng G, Deng Z, Chen Y, Liu H, Li L, Wang S, Chang J, Xu P, Li X, Fang X. Generic Approach to Boost the Sensitivity of Metal Oxide Sensors by Decoupling the Surface Charge Exchange and Resistance Reading Process. ACS APPLIED MATERIALS & INTERFACES 2020; 12:37295-37304. [PMID: 32700520 DOI: 10.1021/acsami.0c07626] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
As one of the bottleneck parameters for practical applications of metal oxide semiconductor-based gas sensors, sensitivity enhancement has attracted significant attention in the past few decades. In this work, alternative to conventional strategies for designing sensitive surfaces via morphology/defect/heterojunction control (then operating at an optimized isothermal temperature with a maximal response), a facile enhancement approach by decoupling surface charge exchange and resistance reading process (possessing different temperature-dependent behaviors) through pulsed temperature modulation (PTM) is reported. Substantially magnifying electrical responses of a generic metal oxide (e.g., WO3) micro-electromechanical systems sensor toward diverse analyte molecules are demonstrated. Under the optimal PTM condition, the response toward 10 ppm NO2 can be boosted from (isothermal) 99.7 to 842.7, and the response toward 100 ppm acetone is increased from (isothermal) 2.7 to 425, which are comparable to or even better than most of the state-of-the-art WO3-based sensors. In comparison to conventional (isothermal) operation, PTM allows to sequentially manipulate the physisorption/chemisorption of analyte molecules, generation of surface reactive oxygen species, and sensor resistance reading and thus provides additional opportunities in boosting the electrical response of oxide sensors for advanced health and/or environment monitoring in future.
Collapse
Affiliation(s)
- Tiantian Dai
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- University of Science and Technology of China, Hefei 230026, China
| | - Gang Meng
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- Advanced Laser Technology Laboratory of Anhui Province, Hefei 230037, China
| | - Zanhong Deng
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- Advanced Laser Technology Laboratory of Anhui Province, Hefei 230037, China
| | - Ying Chen
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
| | - Hongyu Liu
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- University of Science and Technology of China, Hefei 230026, China
| | - Liang Li
- College of Physics Optoelectronics and Energy Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou 215006, China
| | - Shimao Wang
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- Advanced Laser Technology Laboratory of Anhui Province, Hefei 230037, China
| | - Junqing Chang
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- University of Science and Technology of China, Hefei 230026, China
| | - Pengcheng Xu
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
| | - Xinxin Li
- State Key Lab of Transducer Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
| | - Xiaodong Fang
- Anhui Provincial Key Laboratory of Photonic Devices and Materials, Anhui Institute of Optics and Fine Mechanics, and Key Lab of Photovoltaic and Energy Conservation Materials, Chinese Academy of Sciences, Hefei 230031, China
- Advanced Laser Technology Laboratory of Anhui Province, Hefei 230037, China
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen 518118, China
| |
Collapse
|
39
|
Korotcenkov G. Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations. Part 1: 1D and 2D Nanostructures. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1392. [PMID: 32708967 PMCID: PMC7407990 DOI: 10.3390/nano10071392] [Citation(s) in RCA: 48] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/07/2020] [Revised: 07/07/2020] [Accepted: 07/13/2020] [Indexed: 01/05/2023]
Abstract
This article discusses the main uses of 1D and 2D nanomaterials in the development of conductometric gas sensors based on metal oxides. It is shown that, along with the advantages of these materials, which can improve the parameters of gas sensors, there are a number of disadvantages that significantly limit their use in the development of devices designed for the sensor market.
Collapse
Affiliation(s)
- Ghenadii Korotcenkov
- Department of Theoretical Physics, Moldova State University, MD-2009 Chisinau, Moldova
| |
Collapse
|
40
|
Wang D, Deng L, Cai H, Yang J, Bao L, Zhu Y, Wang X. Bimetallic PtCu Nanocrystal Sensitization WO 3 Hollow Spheres for Highly Efficient 3-Hydroxy-2-butanone Biomarker Detection. ACS APPLIED MATERIALS & INTERFACES 2020; 12:18904-18912. [PMID: 32251603 DOI: 10.1021/acsami.0c02523] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/23/2023]
Abstract
As a foodborne bacterium, Listeria monocytogenes (LM) can cause serious diseases and even death to weak people. 3-Hydroxy-2-butanone (3H-2B) has been proven to be a biomarker for exhalation of LM. Detection of 3H-2B is a fast and effective method for determining whether the food is infected. Herein, we present an excellent 3H-2B gas sensor based on bimetallic PtCu nanocrystal modified WO3 hollow spheres. The structure and morphology of the PtCu/WO3 were characterized, and their gas sensitivities were measured by a static testing method. The results showed that the sensor response of WO3 hollow spheres was enhanced by about 15 times after modification with bimetallic PtCu nanocrystal. The maximum response value of the PtCu/WO3 sensor to 10 ppm 3H-2B is as high as 221.2 at 110 °C. In addition, the PtCu/WO3 sensor also exhibited good selectivity to 3H-2B, fast response/recovery time (9 s/28 s), and low limit of detection (LOD < 0.5 ppm). Furthermore, the sensitivity mechanism was studied by monitoring the reaction products by gas chromatography-mass spectrometry. The excellent gas-sensing performance can be attributed to the synergy between PtCu and WO3, including the unique spillover effect of O2 on PtCu nanoparticles, the regulated depletion layer by p-type CuxO to n-type WO3, and their selective catalysis to 3H-2B. Hence, this work offers the rational design and synthesis of highly efficient sensitive materials for the detection of LM for food security.
Collapse
Affiliation(s)
- Ding Wang
- School of Material Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| | - Lifeng Deng
- School of Material Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| | - Haijie Cai
- College of Food Science and Technology, Shanghai Ocean University, Shanghai 201306, China
| | - Jialin Yang
- School of Material Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| | - Liping Bao
- School of Material Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| | - Yongheng Zhu
- College of Food Science and Technology, Shanghai Ocean University, Shanghai 201306, China
| | - Xianying Wang
- School of Material Science & Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
| |
Collapse
|
41
|
Li K, Luo Y, Gao L, Li T, Duan G. Au-Decorated ZnFe 2O 4 Yolk-Shell Spheres for Trace Sensing of Chlorobenzene. ACS APPLIED MATERIALS & INTERFACES 2020; 12:16792-16804. [PMID: 32182414 DOI: 10.1021/acsami.0c00525] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Noble metals supported on metal oxides are promising materials for widely applying on gas sensors because of their enviable physical and chemical properties in enhancing the sensitivity and selectivity. Herein, pristine ZFO yolk-shell spheres composed of ultrathin nanosheets and ultrasmall nanoparticles decorated with nanosized Au particles with a diameter of 1-2 nm are fabricated using the method of solution-phase deposition-precipitation. As a result, the Au@ZFO yolk-shell sphere based sensor exhibits significantly sensing performances for chlorobenzene (CB). In comparison with pristine ZFO, the response (Rair/Rgas= 90.9) of a Au@ZFO based sensor with a low detection limit of 100 ppb increases 4-fold when exposed to 10 ppm chlorobezene at 150 °C. Excitingly, the sensing response for chlorobenzene is the highest among metal oxides semiconductor based sensors. Moreover, the sensors can be further applied in the field of chlorobenzene monitoring, owing to its outstanding selectivity. The results elaborated that the enhanced sensing mechanism is mainly attributed to the effects of electronic sensitization and chemical sensitization, which are induced by the Au nanoparticles on the surface of ZFO yolk-shell spheres. Density functional theory (DFT) calculations further illustrated that the existence of Au nanoparticles exhibits higher adsorption energy and net charge transfer for CB. In addition, the relationship between the sensing performances of pristine ZFO and Au@ZFO yolk-shell spheres for chlorobenzene and the factors of Au loading amount, operating temperature, and humidity was also fully investigated in this work.
Collapse
Affiliation(s)
- Ke Li
- Key Laboratory of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, China
- University of Science and Technology of China, Hefei, 230026, China
| | - Yuanyuan Luo
- Key Laboratory of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, China
| | - Lei Gao
- Key Laboratory of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031, China
| | - Tie Li
- Science and Technology on Microsystem Laboratory, Shanghai Institute of Microsystems and Information Technology, Chinese Academy of Sciences, Shanghai 200050, China
| | - Guotao Duan
- Wuhan National Laboratory for Optoelectronics, School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074, China
| |
Collapse
|
42
|
Jian Y, Hu W, Zhao Z, Cheng P, Haick H, Yao M, Wu W. Gas Sensors Based on Chemi-Resistive Hybrid Functional Nanomaterials. NANO-MICRO LETTERS 2020; 12:71. [PMID: 34138318 PMCID: PMC7770957 DOI: 10.1007/s40820-020-0407-5] [Citation(s) in RCA: 85] [Impact Index Per Article: 21.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/03/2019] [Accepted: 02/02/2020] [Indexed: 05/12/2023]
Abstract
Chemi-resistive sensors based on hybrid functional materials are promising candidates for gas sensing with high responsivity, good selectivity, fast response/recovery, great stability/repeatability, room-working temperature, low cost, and easy-to-fabricate, for versatile applications. This progress report reviews the advantages and advances of these sensing structures compared with the single constituent, according to five main sensing forms: manipulating/constructing heterojunctions, catalytic reaction, charge transfer, charge carrier transport, molecular binding/sieving, and their combinations. Promises and challenges of the advances of each form are presented and discussed. Critical thinking and ideas regarding the orientation of the development of hybrid material-based gas sensor in the future are discussed.
Collapse
Affiliation(s)
- Yingying Jian
- School of Advanced Materials and Nanotechnology, Interdisciplinary Research Center of Smart Sensors, Xidian University, Xi'an, 710071, People's Republic of China
| | - Wenwen Hu
- School of Aerospace Science and Technology, Xidian University, Xi'an, 710071, People's Republic of China
| | - Zhenhuan Zhao
- School of Advanced Materials and Nanotechnology, Interdisciplinary Research Center of Smart Sensors, Xidian University, Xi'an, 710071, People's Republic of China
| | - Pengfei Cheng
- School of Aerospace Science and Technology, Xidian University, Xi'an, 710071, People's Republic of China
| | - Hossam Haick
- School of Advanced Materials and Nanotechnology, Interdisciplinary Research Center of Smart Sensors, Xidian University, Xi'an, 710071, People's Republic of China.
- Department of Chemical Engineering, Russell Berrie Nanotechnology Institute, Technion-Israel Institute of Technology, 3200003, Haifa, Israel.
| | - Mingshui Yao
- Institute for Integrated Cell-Material Sciences (WPI-iCeMS), Kyoto University Institute for Advanced Study, Kyoto University, Yoshida Ushinomiya-cho, Sakyo-ku, Kyoto, 606-8501, Japan.
| | - Weiwei Wu
- School of Advanced Materials and Nanotechnology, Interdisciplinary Research Center of Smart Sensors, Xidian University, Xi'an, 710071, People's Republic of China.
| |
Collapse
|
43
|
Zhou X, Xue Z, Chen X, Huang C, Bai W, Lu Z, Wang T. Nanomaterial-based gas sensors used for breath diagnosis. J Mater Chem B 2020; 8:3231-3248. [DOI: 10.1039/c9tb02518a] [Citation(s) in RCA: 77] [Impact Index Per Article: 19.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Gas-sensing applications commonly use nanomaterials (NMs) because of their unique physicochemical properties, including a high surface-to-volume ratio, enormous number of active sites, controllable morphology, and potential for miniaturisation.
Collapse
Affiliation(s)
- Xinyuan Zhou
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| | - Zhenjie Xue
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| | - Xiangyu Chen
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| | - Chuanhui Huang
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| | - Wanqiao Bai
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| | - Zhili Lu
- Key Laboratory of Materials Processing and Mold
- Ministry of Education
- Zhengzhou Universit
- P. R. China
| | - Tie Wang
- Beijing National Laboratory for Molecular Sciences
- Key Laboratory of Analytical Chemistry for Living Biosystems
- Institute of Chemistry
- Chinese Academy of Sciences
- China
| |
Collapse
|
44
|
Wan K, Wang D, Wang F, Li H, Xu J, Wang X, Yang J. Hierarchical In 2O 3@SnO 2 Core-Shell Nanofiber for High Efficiency Formaldehyde Detection. ACS APPLIED MATERIALS & INTERFACES 2019; 11:45214-45225. [PMID: 31710803 DOI: 10.1021/acsami.9b16599] [Citation(s) in RCA: 55] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
In this work, three-dimensional (3D) hierarchical In2O3@SnO2 core-shell nanofiber (In2O3@SnO2) was designed and successfully prepared via a facile electrospinning and further hydrothermal methods. Vertically aligned SnO2 nanosheets uniformly grown on the outside surface of In2O3 nanofibers were clearly observed by field emission scanning electron microscopy. Besides, hierarchical core-shell nanostructure of In2O3@SnO2 was characterized by elemental maps using scanning transmission electron microscopy. The formaldehyde (HCHO) sensing performances of pure In2O3 nanofibers, SnO2 nanosheets, and In2O3@SnO2 core-shell nanocomposite were compared, and the In2O3@SnO2 nanocomposite possessed highest response value, fast response/recovery speed, best selectivity, and lowest HCHO detection limit. Specifically, the response value (Ra/Rg) of the In2O3@SnO2 nanocomposite reached 180.1 toward 100 ppm of HCHO gas, which was near 9 and 6 times higher than that of the pure In2O3 nanofibers (Ra/Rg = 19.7) and pure SnO2 nanosheets (Ra/Rg = 33.2), respectively. In addition, the gas sensor showed instantaneous response/recovery time (3/3.6 s) toward 100 ppm of HCHO at the optimal operation temperature of 120 °C. More importantly, the detection limit toward HCHO gas was as low as 10 ppb (Ra/Rg = 1.9), which could be used for trace HCHO gas detection. The excellent sensing properties of the In2O3@SnO2 were attributed to the synergistic effect of large specific surface areas of SnO2 nanosheet arrays, abundant adsorbed oxygen species on the surface, unique electron transformation between core-shell heterogeneous materials, and long electronic transmission channel of SnO2 transition layer. This work provides an efficient route for the preparation of novel hierarchical sensitive materials.
Collapse
Affiliation(s)
- Kechuang Wan
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Ding Wang
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Feng Wang
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Huijun Li
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Jingcheng Xu
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Xianying Wang
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| | - Junhe Yang
- School of Material Science & Engineering , University of Shanghai for Science and Technology , Shanghai 200093 , P. R. China
| |
Collapse
|
45
|
Improvement of gas sensing performance for tin dioxide sensor through construction of nanostructures. J Colloid Interface Sci 2019; 557:673-682. [DOI: 10.1016/j.jcis.2019.09.073] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2019] [Revised: 09/19/2019] [Accepted: 09/20/2019] [Indexed: 01/30/2023]
|
46
|
Bai J, Li Y, Liu Y, Wang H, Liu F, Liu F, Sun P, Yan X, Lu G. Au 39Rh 61 Alloy Nanocrystal-Decorated W 18O 49 for Enhanced Detection of n-Butanol. ACS Sens 2019; 4:2662-2670. [PMID: 31533422 DOI: 10.1021/acssensors.9b01073] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
Here, AuxRh1-x alloy nanocrystals (NCs) were used to decorate W18O49 for enhanced detection of n-butanol vapor. Monodisperse AuxRh1-x alloy NCs with a tunable composition and urchinlike W18O49 were synthesized by a simple solvothermal method. AuxRh1-x alloy NCs were loaded onto the W18O49 surface by the impregnation method. A series of material characterization methods were employed to characterize the structure and morphology of as-synthesized materials. The performance of AuxRh1-x-W18O49-based sensors to n-butanol was investigated. The results demonstrated that the Au39Rh61-W18O49-based sensor had the highest response, short response time, good selectivity, excellent repeatability, and stability to n-butanol. The gas sensing mechanism was supposed, the excellent catalytic capability of the AuxRh1-x alloy NCs were believed to be a major factor in enhancing the detection of n-butanol.
Collapse
Affiliation(s)
- Jihao Bai
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Yueyue Li
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Yueying Liu
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Hongtao Wang
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Fengmin Liu
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Fangmeng Liu
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Peng Sun
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Xu Yan
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| | - Geyu Lu
- State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin Province Key Laboratory Gas Sensors, Jilin University, 2699 Qianjin Street, Changchun 130012, China
| |
Collapse
|
47
|
Jang JS, Cho S, Han HJ, Song SW, Kim SJ, Koo WT, Kim DH, Jeong H, Jung YS, Kim ID. Universal Synthesis of Porous Inorganic Nanosheets via Graphene-Cellulose Templating Route. ACS APPLIED MATERIALS & INTERFACES 2019; 11:34100-34108. [PMID: 31436079 DOI: 10.1021/acsami.9b11124] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Two-dimensional (2D) inorganic nanomaterials have attracted enormous interest in diverse research areas because of their intriguing physicochemical properties. However, reliable method for the synthesis and composition manipulation of polycrystalline inorganic nanosheets (NSs) are still considered grand challenges. Here, we report a robust synthetic route for producing various kinds of inorganic porous NSs with desired multiple components and precise compositional stoichiometry by employing tunicin, i.e., cellulose extracted from earth-abundant marine invertebrate shell waste. Cellulose fibrils can be tightly immobilized on graphene oxide (GO) NSs to form stable tunicin-loaded GO NSs, which are used as a sacrificial template for homogeneous adsorption of diverse metal precursors. After a subsequent pyrolysis process, 2D metallic or metal oxide NSs are formed without any structural collapse. The rationally designed tunicin-loaded GO NS templating route paves a new path for the simple preparation of multicompositional inorganic NSs for broad applications, including chemical sensing and electrocatalysis.
Collapse
Affiliation(s)
- Ji-Soo Jang
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Seunghee Cho
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Hyeuk Jin Han
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Seok-Won Song
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Sang-Joon Kim
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Won-Tae Koo
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Dong-Ha Kim
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Hyeonsu Jeong
- Institute of Advanced Composite Materials , Korea Institute of Science and Technology (KIST) , Chudong-ro 92, Bongdong-eup , Wanju-gun, Jeonrabuk-do , 565-905 , Republic of Korea
| | - Yeon Sik Jung
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| | - Il Doo Kim
- Department of Materials Science and Engineering , Korea Advanced Institute of Science and Technology , 291. Daehak-ro , Yuseong-gu, Daejeon 305-701 , Republic of Korea
- Advanced Nanosensor Research Center , KI Nanocentury, KAIST , 291 Daehak-ro , Yuseong-gu, Daejeon 34141 , Republic of Korea
| |
Collapse
|
48
|
|
49
|
Liu B, Xu Y, Li K, Wang H, Gao L, Luo Y, Duan G. Pd-Catalyzed Reaction-Producing Intermediate S on a Pd/In 2O 3 Surface: A Key To Achieve the Enhanced CS 2-Sensing Performances. ACS APPLIED MATERIALS & INTERFACES 2019; 11:16838-16846. [PMID: 30938144 DOI: 10.1021/acsami.9b01638] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Although chemiresistive gas sensors, based on metal-oxide semiconductors, have exhibited particular promise for the monitoring of air pollution, they are often limited because of poor selectivity. In that case, to overcome this issue, according to the essence of the gas-sensing process, the method of reforming the surface reaction path on the surface of the sensing materials was used. Here, we report that Pd nanoparticles supported over the In2O3 composites, featured with a yolk-shell structure, enable the trace detection of carbon disulfide (CS2) gas molecules, which are immensely dangerous to humans and animals. Moreover, the prominent enhancement of the gas response and the ultraselective CS2-sensing characteristic were acquired in comparison with pristine In2O3 sensors. Significantly, density functional theory calculations revealed that the Pd supported on In2O3 greatly facilitates the adsorption capacity to CS2, and the intermediate S, produced by Pd-catalyzed desulfurization reaction, on the Pd/In2O3 surface during the sensing process is a key to achieving a high CS2 gas response as well as ultraselectivity, which is well in agreement with the X-ray photoelectron spectroscopy analysis results. On the basis of these results, a new sensing mechanism model for the CS2-sensing process was put forward.
Collapse
Affiliation(s)
- Bo Liu
- School of Optical and Electronic Information , Huazhong University of Science and Technology , Wuhan 430074 , P. R. China
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics , Chinese Academy of Science , Hefei 230031 , P. R. China
- University of Science and Technology of China , Hefei 230026 , P. R. China
| | - Yingming Xu
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science , Heilongjiang University , Harbin 150080 , China
| | - Ke Li
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics , Chinese Academy of Science , Hefei 230031 , P. R. China
- University of Science and Technology of China , Hefei 230026 , P. R. China
| | - Hong Wang
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics , Chinese Academy of Science , Hefei 230031 , P. R. China
- University of Science and Technology of China , Hefei 230026 , P. R. China
| | - Lei Gao
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics , Chinese Academy of Science , Hefei 230031 , P. R. China
- University of Science and Technology of China , Hefei 230026 , P. R. China
| | - Yuanyuan Luo
- Key Lab of Materials Physics, Anhui Key Lab of Nanomaterials and Nanotechnology, Institute of Solid State Physics , Chinese Academy of Science , Hefei 230031 , P. R. China
- University of Science and Technology of China , Hefei 230026 , P. R. China
| | - Guotao Duan
- School of Optical and Electronic Information , Huazhong University of Science and Technology , Wuhan 430074 , P. R. China
| |
Collapse
|
50
|
Nasiri N, Clarke C. Nanostructured Gas Sensors for Medical and Health Applications: Low to High Dimensional Materials. BIOSENSORS 2019; 9:E43. [PMID: 30884916 PMCID: PMC6468653 DOI: 10.3390/bios9010043] [Citation(s) in RCA: 31] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/17/2019] [Revised: 03/10/2019] [Accepted: 03/12/2019] [Indexed: 12/22/2022]
Abstract
Human breath has long been known as a system that can be used to diagnose diseases. With advancements in modern nanotechnology, gas sensors can now diagnose, predict, and monitor a wide range of diseases from human breath. From cancer to diabetes, the need to treat at the earliest stages of a disease to both increase patient outcomes and decrease treatment costs is vital. Therefore, it is the promising candidate of rapid and non-invasive human breath gas sensors over traditional methods that will fulfill this need. In this review, we focus on the nano-dimensional design of current state-of-the-art gas sensors, which have achieved records in selectivity, specificity, and sensitivity. We highlight the methods of fabrication for these devices and relate their nano-dimensional materials to their record performance to provide a pathway for the gas sensors that will supersede.
Collapse
Affiliation(s)
- Noushin Nasiri
- School of Engineering, Faculty of Science and Engineering, Macquarie University, Sydney NSW 2109, Australia.
| | - Christian Clarke
- Institute for Biomedical Materials and Devices, Faculty of Science, University of Technology Sydney, Sydney NSW 2007, Australia.
| |
Collapse
|