Cobalt Covalent Doping in MoS2 to Induce Bifunctionality of Overall Water Splitting

2D Ferromagnetic M3GeTe2 (M = Ni/Fe) for Boosting Intermediates Adsorption toward Faster Water Oxidation

In this work, 2D ferromagnetic M3GeTe2 (MGT, M = Ni/Fe) nanosheets with rich atomic Te vacancies (2D-MGTv) are demonstrated as efficient OER electrocatalyst via a general mechanical exfoliation strategy. X-ray absorption spectra (XAS) and scanning transmission electron microscope (STEM) results validate the dominant presence of metal-O moieties and rich Te vacancies, respectively. The formed Te vacancies are active for the adsorption of OH* and O* species while the metal-O moieties promote the O* and OOH* adsorption, contributing synergistically to the faster oxygen evolution kinetics. Consequently, 2D-Ni3GeTe2v exhibits superior OER activity with only 370 mV overpotential to reach the current density of 100 mA cm-2 and turnover frequency (TOF) value of 101.6 s-1 at the overpotential of 200 mV in alkaline media. Furthermore, a 2D-Ni3GeTe2v-based anion-exchange membrane (AEM) water electrolysis cell (1 cm2) delivers a current density of 1.02 and 1.32 A cm-2 at the voltage of 3 V feeding with 0.1 and 1 m KOH solution, respectively. The demonstrated metal-O coordination with abundant atomic vacancies for ferromagnetic M3GeTe2 and the easily extended preparation strategy would enlighten the rational design and fabrication of other ferromagnetic materials for wider electrocatalytic applications.

Ce-4f as an electron-modulation reservoir weakening Fe-O bond to induce iron vacancies in CeFevNi hydroxide for enhancing oxygen evolution reaction

Designing novel rare-earth-transition metal composites is at the forefront of electrocatalyst research. However, the modulation of transition metal electronic structures by rare earths to induce vacancy defects and enhance electrochemical performance has rarely been reported. In this study, we systematically investigate the mechanism by which Ce-4f electron modulation weakens the Fe-O bond, thereby altering the electronic structure in CeFevNi hydroxide to improve oxygen evolution reaction (OER) performance. Theoretical calculations and experimental characterizations reveal that Ce-4f orbitals function as electron-modulation reservoirs, capable not only of retaining or donating electrons but also of influencing the material's electronic structure. Moreover, Ce-4f bands optimize the Fe lower Hubbard bands (LHB) and O-2p bands, leading to weakened Fe-O bonds and the formation of cationic vacancies. This change results in the upshift of the d-band center at the active sites, favoring the reaction energy barrier for oxygen intermediates in the OER process. The synthesized catalyst demonstrated an overpotential of 201 mV at 10 mA cm-2 and a lifetime exceeding 200 h at 100 mA cm-2 under alkaline conditions. This work offers a proof-of-concept for the application of the mechanism of rare earth-induced transition metal vacancy defects, providing a general guideline for the design and development of novel highly efficient catalysts.

Iron, Tungsten Dual-Doped Nickel Sulfide as Efficient Bifunctional Catalyst for Overall Water Splitting

Developing low-cost and highly efficient bifunctional catalysts for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is a challenging problem in electrochemical overall water splitting. Here, iron, tungsten dual-doped nickel sulfide catalyst (Fe/W-Ni3S2) is synthesized on the nickel foam, and it exhibits excellent OER and HER performance. As a result, the water electrolyze based on Fe/W-Ni3S2 bifunctional catalyst illustrates 10 mA cm-2 at 1.69 V (without iR-compensation) and highly durable overall water splitting over 100 h tested under 500 mA cm-2. Experimental results and DFT calculations indicate that the synergistic interaction between Fe doping and Ni vacancy induced by W leaching during the in situ oxidation process can maximize exposed OER active sites on the reconstructed NiOOH species for accelerating OER kinetics, while the Fe/W dual-doping optimizes the electronic structure of Fe/W-Ni3S2 and the binding strength of intermediates for boosting HER. This study unlocks the different promoting mechanisms of incorporating Fe and W for boosting the OER and HER activity of Ni3S2 for water splitting, which provides significant guidance for designing high-performance bifunctional catalysts for overall water splitting.

Transition metal-based electrocatalysts for alkaline overall water splitting: advancements, challenges, and perspectives

Water electrolysis is a promising method for efficiently producing hydrogen and oxygen, crucial for renewable energy conversion and fuel cell technologies. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are two key electrocatalytic reactions occurring during water splitting, necessitating the development of active, stable, and low-cost electrocatalysts. Transition metal (TM)-based electrocatalysts, spanning noble metals and TM oxides, phosphides, nitrides, carbides, borides, chalcogenides, and dichalcogenides, have garnered significant attention due to their outstanding characteristics, including high electronic conductivity, tunable valence electron configuration, high stability, and cost-effectiveness. This timely review discusses developments in TM-based electrocatalysts for the HER and OER in alkaline media in the last 10 years, revealing that the exposure of more accessible surface-active sites, specific electronic effects, and string effects are essential for the development of efficient electrocatalysts towards electrochemical water splitting application. This comprehensive review serves as a guide for designing and constructing state-of-the-art, high-performance bifunctional electrocatalysts based on TMs, particularly for applications in water splitting.

Tuning Local Atomic Structures in MoS2 Based Catalysts for Electrochemical Nitrate Reduction

In recent years, there has been a substantial surge in the investigation of transition-metal dichalcogenides such as MoS2 as a promising electrochemical catalyst. Inspired by denitrification enzymes such as nitrate reductase and nitrite reductase, the electrochemical nitrate reduction catalyzed by MoS2 with varying local atomic structures is reported. It is demonstrated that the hydrothermally synthesized MoS2 containing sulfur vacancies behaves as promising catalysts for electrochemical denitrification. With copper doping at less than 9% atomic ratio, the selectivity of denitrification to dinitrogen in the products can be effectively improved. X-ray absorption characterizations suggest that two sulfur vacancies are associated with one copper dopant in the MoS2 skeleton. DFT calculation confirms that copper dopants replace three adjacent Mo atoms to form a trigonal defect-enriched region, introducing an exposed Mo reaction center that coordinates with Cu atom to increase N2 selectivity. Apart from the higher activity and selectivity, the Cu-doped MoS2 also demonstrates remarkably improved tolerance toward oxygen poisoning at high oxygen concentration. Finally, Cu-doped MoS2 based catalysts exhibit very low specific energy consumption during the electrochemical denitrification process, paving the way for potential scale-up operations.

Synchronous Surface-Interface and Crystal-Phase Engineered Multifaceted Hybrid Nanostructure of Fe-(1T)-VSe2 Nanosheet and Fe-CoSe2 Nanorods Doped with P for Rapid HER and OER, Kinetics

Two different nanostructures of two dissimilar highly-potent active electrocatalysts, P-dopped metallic-(1T)-Fe-VSe2 (P,Fe-1T-VSe2 ) nanosheet and P-dopped Fe-CoSe2 (P,Fe-CoSe2 ) nanorods are hybridized and integrated into a single heterostructure (P,Fe-(VCo)Se2 ) on Ni-foam for high-performance water splitting (WS). The catalytic efficiency of VSe2 nanosheets is first enhanced by enriching metallic (1T)-phase, then forming bimetallic Fe-V selenide, and finally by P-doping. Similarly, the catalytic efficiency of CoSe2 nanorods is boosted by first fabricating Fe-Co bimetallic selenide and then P-doping. To develop super-efficient electrocatalysts for WS, two individual electrocatalysts P,Fe-1T-VSe2 nanosheet and P,Fe-CoSe2 are hybridized and integrated to form a heterostructure (P,Fe-(VCo)Se2 ). Metallic (1T)-phase of transition metal dichalcogenides has much higher conductivity than the 2H-phase, while bimetallization and P-doping activate basal planes, develop various active components, and form heterostructures that develop a synergistic interfacial effect, all of which, significantly boost the catalytic efficacy of the P,Fe-(VCo)Se2 . P,Fe-(VCo)Se2 shows excellent performance requiring very low overpotential (ηHER = 50 mV@10 mAcm-2 and ηOER = 230 mV@20 mAcm-2 ). P,Fe-(VCo)Se2 (+, -) device requires a cell potential of 1.48 V to reach 10 mA cm-2 for overall WS.

Mechanistic exploration of Co doping in optimizing the electrochemical performance of 2H-MoS2/N-doped carbon anode for potassium-ion battery

The 2H-MoS2/nitrogen-doped carbon (2H-MoS2/NC) composite is a promising anode material for potassium-ion batteries (PIBs). Various transition metal doping has been adopted to optimize the poor intrinsic electronic conductivity and lack of active sites in the intralayer of 2H-MoS2. However, its optimization mechanisms have not been well probed. In this paper, using Cobalt (Co) as an example, we aim to investigate the influence of transition metal doping on the electronic and mechanical properties and electrochemical performance of 2H-MoS2/NC via first-principles calculation. Co doping is found to be effective in improving the electronic conductivity and the areas of active sites on different positions (C surface, interface, and MoS2 surface) of 2H-MoS2/NC. The increased active sites can optimize K adsorption and diffusion capability/processes, where general smaller K adsorption energies and diffusion energy barriers are found after Co doping. This helps improve the rate performance. Especially, the pyridinic N (pyN), pyrrolic N (prN), and graphitic N (grN) are first unveiled to respectively work best in K kinetic adsorption, diffusion, and interfacial stability. These findings are instructive to experimental design of high rate 2H-MoS2/NC electrode materials. The roles of different N types provide new ideas for optimal design of other functional composite materials.

Co, Fe Dual-Doped MoS2 Nanosheets on Polypyrrole Microtubes as Effective Peroxidase Mimics for Glutathione Sensing

Heteroatom doping is considered an effective way to enhance the catalytic activity of MoS2 nanosheets (NSs). In the paper, dual-metal doping was proposed to incorporate Fe and Co into hierarchical MoS2 ultrathin NSs, which grew directly on polypyrrole microtubes (Fe, Co-MoS2@PPy), for the enhanced enzyme-like catalytic reaction. The particular hollow tubular structure realized effective electron transfer. The doped Fe and Co tuned the electronic architecture of the MoS2 NSs to enhance the enzyme-like catalytic activity. The abundant exposed void spaces facilitated ion diffusion/penetration between the PPy interlayer and Fe-Co doped MoS2 shell, leading to heterostructured synergistic effects. Therefore, the synthesized Fe and Co-MoS2@PPy composites showed remarkable catalytic activity. The high catalytic efficiency of Fe and Co-MoS2@PPy was confirmed with the reaction of tetramethylbenzidine (TMB) and H2O2 for visible detection. The blue color disappeared after adding glutathione (GSH). Thus, this procedure was used as a convenient way to detect GSH with a detection limit of 0.76 μM. The dual-metal-doped strategy was confirmed to improve the performance of MoS2 nanocomposites and could be used as a promising matrix for other applications, such as electrochemical energy conversion, medical diagnosis, and others.

Hierarchical Spatial Confinement Unlocking the Storage Limit of MoS2 for Flexible High-Energy Supercapacitors

Molybdenum sulfide (MoS2) is a promising electrode material for supercapacitors; however, its limited Mo/S edge sites and intrinsic inert basal plane give rise to sluggish active electronic states, thus constraining its electrochemical performance. Here we propose a hierarchical confinement strategy to develop ethylene molecule (EG)-intercalated Co-doped sulfur-deficient MoS2 (Co-EG/SV-MoS2) for efficient and durable K-ion storage. Theoretical analyses suggest that the intercalation-confined EG and lattice-confined Co can enhance the interfacial K-ion storage capacity while reducing the K-ion diffusion barrier. Experimentally, the intercalated EG molecules with mildly reducing properties induced the creation of sulfur vacancies, expanded the interlayer spacing, regulated the 2H-1T phase transition, and strengthened the structural grafting between layers, thereby facilitating ion diffusion and ensuring structural durability. Moreover, the Co dopants occupying the initial Mo sites initiated charge transfer, thus activating the basal plane. Consequently, the optimized Co-EG/SV-MoS2 electrode exhibited a substantially improved electrochemical performance. Flexible supercapacitors assembled with Co-EG/SV-MoS2 delivered a notable areal energy density of 0.51 mW h cm-2 at 0.84 mW cm-2 with good flexibility. Furthermore, supercapacitor devices were integrated with a strain sensor to create a self-powered system capable of real-time detection of human joint motion.

Nickel Nanoparticles Protruding from Molybdenum Carbide Micropillars with Carbon Layer-Protected Biphasic 0D/1D Heterostructures for Efficient Water Splitting

It remains a tremendous challenge to achieve high-efficiency bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) for hydrogen production by water splitting. Herein, a novel hybrid of 0D nickel nanoparticles dispersed on the one-dimensional (1D) molybdenum carbide micropillars embedded in the carbon layers (Ni/Mo2C@C) was successfully prepared on nickel foam by a facile pyrolysis strategy. During the synthesis process, the nickel nanoparticles and molybdenum carbide were simultaneously generated under H2 and C2H2 mixed atmospheres and conformally encapsulated in the carbon layers. Benefiting from the distinctive 0D/1D heterostructure and the synergistic effect of the biphasic Mo2C and Ni together with the protective effect of the carbon layer, the reduced activation energy barriers and fast catalytic reaction kinetics can be achieved, resulting in a small overpotential of 96 mV for the HER and 266 mV for the OER at the current density of 10 mA cm-2 together with excellent durability in 1.0 M KOH electrolyte. In addition, using the developed Ni/Mo2C@C as both the cathode and anode, the constructed electrolyzer exhibits a small voltage of 1.55 V for the overall water splitting. The novel designed Ni/Mo2C@C may give inspiration for the development of efficient bifunctional catalysts with low-cost transition metal elements for water splitting.

Heteroatom Doping Promoting CoP for Driving Water Splitting

CoP nanomaterials have been extensively regarded as one of the most promising electrocatalysts for overall water splitting due to their unique bifunctionality. Although the great promise for future applications, some important issues should also be addressed. Heteroatom doping has been widely acknowledged as a potential strategy for improving the electrocatalytic performance of CoP and narrowing the gap between experimental study and industrial applications. Recent years have witnessed the rapid development of heteroatom-doped CoP electrocatalysts for water splitting. Aiming to provide guidance for the future development of more effective CoP-based electrocatalysts, we herein organize a comprehensive review of this interesting field, with the special focus on the effects of heteroatom doping on the catalytic performance of CoP. Additionally, many heteroatom-doped CoP electrocatalysts for water splitting are also discussed, and the structure-activity relationship is also manifested. Finally, a systematic conclusion and outlook is well organized to provide direction for the future development of this interesting field.

Interfacial and Electronic Modulation of W Bridging Heterostructure Between WS2 and Cobalt-Based Compounds for Efficient Overall Water Splitting

The development of high performance electrocatalysts for effective hydrogen production is urgently needed. Herein, three hybrid catalysts formed by WS2 and Co-based metal-organic frameworks (MOFs) derivatives are constructed, in which the small amount of W in the MOFs derivatives acts as a bridge to provide the charge transfer channel and enhance the stability. In addition, the effects of the surface charge distribution on the catalytic performance are fully investigated. Due to the optimal interfacial electron coupling and rearrangement as well as its unique porous morphology, WS2 @W-CoPx exhibits superior bifunctional performance in alkaline media with low overpotentials in hydrogen evolution reaction (HER) (62 mV at 10 mA cm-2 ) and oxygen evolution reaction (OER) (278 mV at 100 mA cm-2 ). For overall water splitting (OWS), WS2 @W-CoPx only requires a cell voltage of 1.78 V at 50 mA cm-2 and maintains good stability within 72 h. Density functional theory calculations verify that the combination of W-CoPx with WS2 can effectively enhance the activity of OER and HER with weakened OH (or O) adsorption and enhanced H atom adsorption. This work provides a feasible idea for the design and practical application of WS2 or phosphide-based catalysts in OWS.

A novel sacrificial solvent method to synthesize self-supporting Co9S8/Ni3S2 heterostructure catalyst for efficient oxygen evolution reaction

Synthesizing catalysts for efficient oxygen evolution reaction (OER) with lower cost and simpler design is of significant importance to achieve sustainable hydrogen production. In this work, we propose a novel "sacrificial solvent method" for the first time. Dicobalt octacarbonyl (Co2(CO)8), dimethyl sulfoxide (DMSO), and Ni foam (NF) were used as the raw materials in the solvothermal process. DMSO played the role of both the sacrificial solvent and the sulfur source. Through the self-consumption of DMSO, we finally obtained the Co9S8/Ni3S2 heterostructure supported on the NF (Co9S8/Ni3S2@NF) in one step. The Co9S8/Ni3S2@NF catalyst exhibited excellent OER activity in alkaline environment, with an overpotential of only 264 mV at a current density of 20 mA cm-2, a low Tafel slope of 68.28 mV dec-1 and maintained its current density after 20 h of constant potential testing. This work introduces a new method for synthesizing metal sulfide catalysts using DMSO as a sacrificial solvent. It provides broader opportunities for the development of more efficient and sustainable catalysts for energy conversion and storage.

Chiral Van Der Waals Superlattices for Enhanced Spin-Selective Transport and Spin-Dependent Electrocatalytic Performance

The emergence of the chiral-induced spin-selectivity (CISS) effect offers a new avenue for chiral organic molecules to autonomously manipulate spin configurations, thereby opening up possibilities in spintronics and spin-dependent electrochemical applications. Despite extensive exploration of various chiral systems as spin filters, one often encounters challenges in achieving simultaneously high conductivity and high spin polarization (SP). In this study, a promising chiral van der Waals superlattice, specifically the chiral TiS2 crystal, is synthesized via electrochemical intercalation of chiral molecules into a metallic TiS2 single crystal. Multiple tunneling processes within the highly ordered chiral layered structure of chiral TiS2 superlattices result in an exceptionally high SP exceeding 90%. This remarkable observation of significantly high SP within the linear transport regime is unprecedented. Furthermore, the chiral TiS2 electrode exhibits enhanced catalytic activity for oxygen evolution reaction (OER) due to its remarkable spin-selectivity for triplet oxygen evolution. The OER performance of chiral TiS2 superlattice crystals presented here exhibits superior characteristics to previously reported chiral MoS2 catalysts, with an approximately tenfold increase in current density. The combination of metallic conductivity and high SP sets the stage for the development of a new generation of CISS materials, enabling a wide range of electron spin-based applications.

First-Row Transition Metals for Catalyzing Oxygen Redox

Rechargeable zinc-air batteries are widely recognized as a highly promising technology for energy conversion and storage, offering a cost-effective and viable alternative to commercial lithium-ion batteries due to their unique advantages. However, the practical application and commercialization of zinc-air batteries are hindered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Recently, extensive research has focused on the potential of first-row transition metals (Mn, Fe, Co, Ni, and Cu) as promising alternatives to noble metals in bifunctional ORR/OER electrocatalysts, leveraging their high-efficiency electrocatalytic activity and excellent durability. This review provides a comprehensive summary of the recent advancements in the mechanisms of ORR/OER, the performance of bifunctional electrocatalysts, and the preparation strategies employed for electrocatalysts based on first-row transition metals in alkaline media for zinc-air batteries. The paper concludes by proposing several challenges and highlighting emerging research trends for the future development of bifunctional electrocatalysts based on first-row transition metals.

CDs Regulated Sulfur-Based Flexible Electrode with Range pH Values for Efficient and Durable Hydrogen Evolution Reaction

How to mildly structure a high intrinsic activity and stable catalytic electrode to realize long-term catalytic water splitting to produce hydrogen at a wide range of pH values at industrial high current is a challenge. Herein, this work creatively proposes to prepare industrial-grade catalytic electrodes with high efficiency and stability at high current density through carbon quantum dots (CDs) modification nickel sulfide on hydrophilic flexible filter paper via one-step mild chemical plating (denoted as CDs-Ni3 S2 @HFP). The intrinsic activity and surface area, electron transfer ability, and corrosion resistance of Ni3 S2 material are increased due to the regulation, homogenous, and high concentration doping of CDs. The overpotential of the flexible catalytic electrode is only 30, 35, and 87 mV in 1 m KOH, simulated seawater (1 m KOH + 0.5 m NaCl), and neutral electrolyte (0.5 m PBS) at a current density of 10 mA cm-2 . More attractively, the CDs-Ni3 S2 @HFP electrode achieves over 500 h of efficient and stable catalysis at industrial high current density (500 mA cm-2 ). Due to the advantages of mild, universal, and large-area preparation of catalytic materials, this work provides technical support for flexible catalytic electrodes in efficient catalysis toward water splitting, energy storage, and device preparation.

Charge Self-Regulation of Metallic Heterostructure Ni2 P@Co9 S8 for Alkaline Water Electrolysis with Ultralow Overpotential at Large Current Density

Designing cost-effective alkaline water-splitting electrocatalysts is essential for large-scale hydrogen production. However, nonprecious catalysts face challenges in achieving high activity and durability at a large current density. An effective strategy for designing high-performance electrocatalysts is regulating the active electronic states near the Fermi-level, which can improve the intrinsic activity and increase the number of active sites. As a proof-of-concept, it proposes a one-step self-assembly approach to fabricate a novel metallic heterostructure based on nickel phosphide and cobalt sulfide (Ni2 P@Co9 S8 ) composite. The charge transfer between active Ni sites of Ni2 P and Co─Co bonds of Co9 S8 efficiently enhances the active electronic states of Ni sites, and consequently, Ni2 P@Co9 S8 exhibits remarkably low overpotentials of 188 and 253 mV to reach the current density of 100 mA cm-2 for the hydrogen evolution reaction and oxygen evolution reaction, respectively. This leads to the Ni2 P@Co9 S8 incorporated water electrolyzer possessing an ultralow cell voltage of 1.66 V@100 mA cm-2 with ≈100% retention over 100 h, surpassing the commercial Pt/C║RuO2 catalyst (1.9 V@100 mA cm-2 ). This work provides a promising methodology to boost the activity of overall water splitting with ultralow overpotentials at large current density by shedding light on the charge self-regulation of metallic heterostructure.

Nitrogen Plasma Activates CoMn-Layered Double Hydroxides for Superior Electrochemical Oxygen Evolution

Bimetallic layered double hydroxide is considered an ideal electrocatalytic material. However, due to the poor electrical conductivity of the bimetallic layered structure, obtaining highly active and stable catalysts through facile regulation strategies remains a great challenge. Herein, we use a simple corrosion strategy and nitrogen plasma technology to convert cobalt-based metal-organic frameworks into nitrogen-doped CoMn bimetallic layered double hydroxides (CoMn-LDH). Under the condition of regulating the local coordination environment of the catalytic active site and the presence of rich oxygen vacancy defects, N@CoMn-LDH/CC generates a low overpotential of 219 mV at 10 mA cm-2, which exceeds that of the commercial RuO2 catalyst. Density functional theory calculation shows that nitrogen doping improves the adsorption energy of the Mn site for oxygen evolution intermediates and reduces the reaction energy barrier of the Co site. Meanwhile, experiments and theoretical calculations verify that the mechanism of nitrogen doping regulating the oxygen evolution reaction (OER) follows the lattice oxygen oxidation mechanism, avoiding the collapse of the structure caused by catalyst reconstruction, thus improving the stability of oxygen evolution. This work provides a new simple strategy for the preparation of catalysts for a superior electrocatalytic oxygen evolution reaction.

Synergistically Regulating the Electronic Structure of CoS by Cation and Anion Dual-Doping for Efficient Overall Water Splitting

Precisely regulating the electronic construction of the reactive center is an essential method to improve the electrocatalysis, but achieving efficient multifunctional characteristics remains a challenge. Herein, CoS sample dual-doped by Cu and F atoms, as bifunctional electrocatalyst, is designed and synthesized for water electrolysis. According to the experimental results, Cu atom doping can perform primary electronic adjustment and obtain bifunctional properties, and then the electronic structure is adjusted for the second time to achieve an optimal state by introducing F atom. Meanwhile, this dual-doping strategy will result in lattice distortion and expose more active sites. As expected, dual-doped Cu-F-CoS show the brilliant electrocatalytic activity, revealing ultralow overpotentials (59 mV for HER, 213 mV for OER) at 10 mA cm-2 in alkaline electrolyte. Besides, it also exhibits distinguished water electrolysis activity with cell voltage as low as 1.52 V at 10 mA cm-2 . Our work can provide an atomic-level perception for adjusting the electronic construction of reactive sites by means of dual-doping engineering and put forward a contributing path for the electrocatalysts with multifunctional designing.

Exploring the Effects of Various Two-Dimensional Supporting Materials on the Water Electrolysis of Co-Mo Sulfide/Oxide Heterostructure

In this study, various two-dimensional (2D) materials were used as supporting materials for the bimetallic Co and Mo sulfide/oxide (CMSO) heterostructure. The water electrolysis activity of CMSO supported on reduced graphene oxide (rGO), graphite carbon nitride (gC3N4), and siloxene (SiSh) was better than that of pristine CMSO. In particular, rGO-supported CMSO (CMSO@rGO) exhibited a large surface area and a low interface charge-transfer resistance, leading to a low overpotential and a Tafel slope of 259 mV (10 mA/cm2) and 85 mV/dec, respectively, with excellent long-term stability over 40 h of continuous operation in the oxygen evolution reaction.

Enhancing photocatalytic overall water-splitting performance on dual-active-sites of the Co-P@MoS2 catalysts: a DFT study

The rational construction of photocatalysts possesses tremendous potential to solve the energy crisis and environmental pollution; however, designing a catalyst for solar-driven overall water-splitting remains a great challenge. Herein, we propose a new MoS2-based photocatalyst (Co-P@MoS2), which skillfully uses the cobalt (Co) atom to stimulate in-plane S atoms and employs the phosphorus (P) atom to stabilize the basal plane by forming the Co-P bands. Using density functional theory (DFT), it was found that oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) can occur at the P site and S2 site of the Co-P@MoS2, respectively, and the dual-active sites successfully makes a delicate balance between the adsorption and dissociation of hydrogen. Furthermore, the improved overall water-splitting performance of Co-P@MoS2 was verified by analyzing the results of the electron structure and the dynamics of photogenerated carries. It was found that the imbalance of electron transfer caused by the introduction of the Co atom was the main contributor to the catalytic activity of Co-P@MoS2. Our study broadens the idea of developing photocatalysts for the overall water-splitting.

Relationship between Structure and Performance of Atomic-Scale Electrocatalysts for Water Splitting

Atomic-scale electrocatalysts greatly improve the performance and efficiency of water splitting but require special adjustments of the supporting structures for anchoring and dispersing metal single atoms. Here, the structural evolution of atomic-scale electrocatalysts for water splitting is reviewed based on different synthetic methods and structural properties that create different environments for electrocatalytic activity. The rate-determining step or intermediate state for hydrogen or oxygen evolution reactions is energetically stabilized by the coordination environment to the single-atom active site from the supporting material. In large-scale practical use, maximizing the loading amount of metal single atoms increases the efficiency of the electrocatalyst and reduces the economic cost. Dual-atom electrocatalysts with two different single-atom active sites react with an increased number of water molecules and reduce the adsorption energy of water derived from the difference in electronegativity between the two metal atoms. In particular, single-atom dimers induce asymmetric active sites that promote the degradation of H2 O to H2 or O2 evolution. Consequently, the structural properties of atomic-scale electrocatalysts clarify the atomic interrelation between the catalytic active sites and the supporting material to achieve maximum efficiency.

Activating and optimizing the In-Plane interface of 1 T/2H MoS2 for efficient hydrogen evolution reaction

Implanting the octahedral phase (1 T) into the hexagonal phase (2H) of the molybdenum disulfide (MoS₂) matrix is considered one of the effective methods to enhance hydrogen evolution reaction (HER) performances of MoS₂. In this paper, hybrid 1 T/2H MoS₂ nanosheets array was successfully grown on conductive carbon cloth (1 T/2H MoS₂/CC) via facile hydrothermal method and the 1 T phase content in 1 T/2H MoS₂ is regulated to gradually increase from 0 % to 80 %. 1 T/2H MoS₂/CC with 75 % 1 T phase content exhibits optimal HER performances. The DFT calculation results show that S atoms in 1 T/2H MoS₂ interface exhibit the lowest hydrogen adsorption Gibbs free energies (ΔG_H*) compared with other sites. The improvement of HER performances are primarily attributed to activating the in-plane interface regions of the hybrid 1 T/2H MoS₂ nanosheets. Furthermore, the relationship between 1 T MoS₂ content in 1 T/2H MoS₂ and catalytic activity was simulated by a mathematical model, which shows that the catalytic activity presents a trend of increasing and then decreasing with the increase of 1 T phase content.

High-entropy NiFeCoV disulfides for enhanced alkaline water/seawater electrolysis

Creating electrocatalysts with high activity and stability to meet the needs of highly effective seawater splitting is of great importance to achieve the goal of hydrogen production from abundant seawater source, which however is still challenging owing to sluggish oxygen evolution reaction (OER) dynamics and the existed competitive chloride evolution reaction. Herein, high-entropy (NiFeCoV)S₂ porous nanosheets are uniformly fabricated on Ni foam via a hydrothermal reaction process with a sequential sulfurization step for alkaline water/seawater electrolysis. The obtained rough and porous nanosheets provide large active surface area and exposed more active sites, which can facilitate mass transfer and are conducive to the improvement of the catalytic performance. Combined with the strong synergistic electron modulation effect of multi elements in (NiFeCoV)S₂, the as-fabricated catalyst exhibits low OER overpotentials of 220 and 299 mV at 100 mA cm^-2 in alkaline water and natural seawater, respectively. Besides, the catalyst can withstand a long-term durability test for more than 50 h without hypochlorite evolution, showing excellent corrosion resistance and OER selectivity. By employing the (NiFeCoV)S₂ as the electrocatalyst for both anode and cathode to construct an overall water/seawater splitting electrolyzer, the required cell voltages are only 1.69 and 1.77 V to reach 100 mA cm^-2 in alkaline water and natural seawater, respectively, showing a promising prospect towards the practical application for efficient water/seawater electrolysis.

Identification of Co-O-Mo Active Centers on Co-Doped MoS2 Electrocatalyst

Strategies for harmonizing the construction of an active site and the building of electron transport for a hybrid MoS₂ catalyst are crucial for its application in electrochemical reactions. In this work, an accurate and facile hydrothermal strategy was proposed to fabricate the active center of Co-O-Mo on a supported MoS₂ catalyst by forming a CoMoSO phase on the edge of MoS₂, yielding (Co-O)_x-MoS_y (x = 0, 0.3, 0.6, 1, 1.5, or 2.1). The results show that the electrochemical performances (hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and electrochemical degradation) of the yielded MoS₂-based catalysts were positively correlated with the Co-O bonds, verifying the significant role of Co-O-Mo as the active center. The fabricated (Co-O)-MoS_0.9 presented an extremely low overpotential and Tafel slope in both HER and OER, and it also demonstrated excellent BPA removal in the electrochemical degradation reaction. As compared with the Co-Mo-S configuration, the configuration of Co-O-Mo not only serves as the active center but also provides a conducting channel to facilitate electron conductivity with more accessible charge transfer at the electrode/electrolyte interface, which is favorable for electrocatalytic reaction. This work offers a new perspective for the active mechanism of metallic-heteroatom-dopant electrocatalysts and further boosts research on the development of noble/non-noble hybrid electrocatalysts in the future.

Vacancy impacts on electronic and mechanical properties of MX2 (M = Mo, W and X = S, Se) monolayers

Monolayers of transition metal dichalcogenides (TMD) exhibit excellent mechanical and electrical characteristics. Previous studies have shown that vacancies are frequently created during the synthesis, which can alter the physicochemical characteristics of TMDs. Even though the properties of pristine TMD structures are well studied, the effects of vacancies on the electrical and mechanical properties have received far less attention. In this paper, we applied first-principles density functional theory (DFT) to comparatively investigate the properties of defective TMD monolayers including molybdenum disulfide (MoS₂), molybdenum diselenide (MoSe₂), tungsten disulfide (WS₂), and tungsten diselenide (WSe₂). The impacts of six types of anion or metal complex vacancies were studied. According to our findings, the electronic and mechanical properties are slightly impacted by anion vacancy defects. In contrast, vacancies in metal complexes considerably affect their electronic and mechanical properties. Additionally, the mechanical properties of TMDs are significantly influenced by both their structural phases and anions. Specifically, defective diselenides become more mechanically unstable due to the comparatively poor bonding strength between Se and metal based on the analysis of the crystal orbital Hamilton population (COHP). The outcomes of this study may provide the theoretical knowledge base to boost more applications of the TMD systems through defect engineering.

Interfacial Chemical Bond Modulation of Co3(PO4)2-MoO3-x Heterostructures for Alkaline Water/Seawater Splitting

The development of a high current density with high energy conversion efficiency electrocatalyst is vital for large-scale industrial application of alkaline water splitting, particularly seawater splitting. Herein, we design a self-supporting Co₃(PO₄)₂-MoO_3-x/CoMoO₄/NF superaerophobic electrode with a three-dimensional structure for high-performance hydrogen evolution reaction (HER) by a reasonable devise of possible "Co-O-Mo hybridization" on the interface. The "Co-O-Mo hybridization" interfaces induce charge transfer and generation of fresh oxygen vacancy active sites. Consequently, the unique heterostructures greatly facilitate the dissociation process of H₂O molecules and enable efficient hydrogen spillover, leading to excellent HER performance with ultralow overpotentials (76 and 130 mV at 100 and 500 mA cm^-2) and long-term durability of 100 h in an alkaline electrolyte. Theoretical calculations reveal that the Co₃(PO₄)₂-MoO_3-x/CoMoO₄/NF promotes the adsorption/dissociation process of H₂O molecules to play a crucial role in improving the stability and activity of HER. Our results exhibit that the HER activity of non-noble metal electrocatalysts can be greatly enhanced by rational interfacial chemical bonding to modulate the heterostructures.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Engineering Rich Active Sites and Efficient Water Dissociation for Ni-Doped MoS2/CoS2 Hierarchical Structures toward Excellent Alkaline Hydrogen Evolution

Besides improving charge transfer, there are two key factors, such as increasing active sites and promoting water dissociation, to be deeply investigated to realize high-performance MoS₂-based electrocatalysts in alkaline hydrogen evolution reaction (HER). Herein, we have demonstrated the synergistic engineering to realize rich unsaturated sulfur atoms and activated O-H bonds toward the water for Ni-doped MoS₂/CoS₂ hierarchical structures by an approach to Ni doping coupled with in situ sulfurizing for excellent alkaline HER. In this work, the Ni-doped atoms are evolved into Ni(OH)₂ during alkaline HER. Interestingly, the extra unsaturated sulfur atoms will be modulated into MoS₂ nanosheets by breaking Ni-S bonds during the formation of Ni(OH)₂. On the other hand, the higher the mass of the Ni precursor (m_Ni) for the fabrication of our samples, the more Ni(OH)₂ is evolved, indicating a stronger ability for water dissociation of our samples during alkaline HER. Our results further reveal that regulating m_Ni is crucial to the HER activity of the as-synthesized samples. By regulating m_Ni to 0.300 g, a balance between increasing active sites and promoting water dissociation is achieved for the Ni-doped MoS₂/CoS₂ samples to boost alkaline HER. Consequently, the optimal samples present the highest HER activity among all counterparts, accompanied by reliable long-term stability. This work will promise important applications in the field of electrocatalytic hydrogen evolution in alkaline environments.

Novel Bifunctional Nitrogen Doped MoS2/COF-C4N Vertical Heterostructures for Electrocatalytic HER and OER

Highly active and earth-abundant catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) play vital roles in developing efficient water splitting to produce hydrogen fuels. Here, we reported an effective strategy to fabricate a completely new nitrogen-doped MoS2/COF-C4N vertical heterojunction (N-MoS2/COF-C4N) as precious-metal-free bifunctional electrocatalysts for both HER and OER. Compared with MoS2 and COF-C4N, the obtained vertical N-MoS2/COF-C4N catalyst showed enhanced HER with a low overpotential of 106 mV at 10 mA cm−2, which is six times lower than MoS2. The superior acidic HER activity, molecular mechanism, and charge transfer characteristic of this vertical N-MoS2/COF-C4N were investigated experimentally and theoretically in detail. Its basic OER activity is almost equal to that of COF-C4N with an overpotential of 349 mV at 10 mA cm−2, which showed that the in-situ growing method maintains the exposure of the C active sites to the greatest extent. The preparation and investigation for vertical N-MoS2/COF-C4N provide ideas and a research basis for us to further explore promising overall water-splitting electrocatalysts.

A critical review of research progress for metal alloy materials in hydrogen evolution and oxygen evolution reaction

Hydrogen produced by electrolyzing water has attracted extensive attention as an effective way to generate and store new energy by using renewable energy. Electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were the core reactions in the process of hydrogen production by water electrolysis, however, due to the low efficiency of the electrolytic device caused by its slow kinetic reaction and the dependence on noble metal catalysts (platinum and iridium/ruthenium (oxide)), which limited its wide application. The preparation of high-efficiency catalysts with high catalytic activity, stability, low cost and scalability played a vital role in promoting the development of hydrogen production technology from electrolytic water and has become a current research hotspot. Metal alloy catalysts have been widely studied as high-efficiency electrocatalysts. This study introduced and analyzed the mechanism and application of metal alloy catalyst in hydrogen and oxygen evolution reaction, summarized and discussed the progress in the design, preparation and application of metal alloy electrocatalysts. Finally, the strategy and prospect of new high-efficiency electrocatalysts were proposed.

Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review

An unsustainable reliance on fossil fuels is the primary cause of the vast majority of greenhouse gas emissions, which in turn lead to climate change. Green hydrogen (H₂), which may be generated by electrolyzing water with renewable power sources, is a possible substitute for fossil fuels. On the other hand, the increasing intricacy of hydrogen evolution electrocatalysts that are presently being explored makes it more challenging to integrate catalytic theories, catalytic fabrication procedures, and characterization techniques. This review will initially present the thermodynamics, kinetics, and associated electrical and structural characteristics for HER electrocatalysts before highlighting design approaches for the electrocatalysts. Secondly, an in-depth discussion regarding the rational design, synthesis, mechanistic insight, and performance improvement of electrocatalysts is centered on both the intrinsic and extrinsic influences. Thirdly, the most recent technological advances in electrocatalytic water-splitting approaches are described. Finally, the difficulties and possibilities associated with generating extremely effective HER electrocatalysts for water-splitting applications are discussed.

Cobalt-doped copper vanadate: a dual active electrocatalyst propelling efficient H2 evolution and glycerol oxidation in alkaline water

Strategically doped metal oxide nanomaterials signify a rapidly growing genre of functional materials with a wide range of practical applications. Copper vanadate (CuV) represents one such highly active system, which has been rarely explored following its doping with an abundant first-row transition metal. Here, we have developed a series of CuV samples with varying cobalt(ii) doping concentrations deploying a relatively simple solid state synthetic procedure. Among the samples, the 10% Co(ii)-doped CuV (Co_10%-CuV) exhibited excellent reactivity for both the H₂ evolution reaction (HER) and glycerol oxidation reaction (GOR) in an alkaline aqueous medium (pH 14.0) during cathodic and anodic scans, respectively. During this dual-active catalysis, surface-immobilized Co_10%-CuV operates at exceptionally low overpotentials of 176 mV and 160 mV for the HER and GOR, respectively, while achieving 10 mA cm² current density. The detailed spectroscopic analysis revealed the formation of formate as the major product during the GOR with a faradaic efficiency of >90%. Therefore, this Co_10%-CuV can be included on either side of a two-electrode electrolyzer assembly to trigger a complete biomass-driven H₂ production, establishing an ideal carbon-neutral energy harvest process.

Enhanced Activities in Alkaline Hydrogen and Oxygen Evolution Reactions on MoS2 Electrocatalysts by In-Plane Sulfur Defects Coupled with Transition Metal Doping

2D transition metal disulfides (TMDs) are promising and cost-effective alternatives to noble-metal-based catalysts for hydrogen production. Activation of the inert basal plane of TMDs is crucial to improving the catalytic efficiency. Herein, introduction of in-plane sulfur vacancies (S_v ) and 3d transition metal dopants in concert activates the basal planes of MoS₂ (M-S_v -MoS₂ ) to achieve high activities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Acetate introducing mild wet chemical etching removes surface S atoms facilitating subsequent cation exchange between the exposed Mo atoms and targeted metal ions in solution. Density-functional theory calculation demonstrates that the exposed 3d transition metal dopants in MoS₂ basal planes serve as multifunctional active centers, which not only reduce ΔG_H* but also accelerate water oxidation. As a result, the optimal Ni-S_v -MoS₂ and Co-S_v -MoS₂ electrocatalysts show excellent stability and alkaline HER and OER characteristics such as low overpotentials of 101 and 190 mV at 10 mA cm^-2 , respectively. The results reveal a strategy to activate the inert MoS₂ basal planes by defect and doping co-engineering and the technique can be extended to other types of TMDs for high-efficiency electrocatalysis beyond water splitting.

Designing SnS/MoS2 van der Waals heterojunction for direct Z-scheme photocatalytic overall water-splitting by DFT investigation

Construction of direct Z-scheme photocatalytic heterojunctions with an internal electric field has been proposed as an outstanding method to achieve efficient utilization of solar energy for photocatalytic overall water-splitting. In this work, the properties of van der Waals (vdW) heterojunctions formed by group-IV mono-chalcogenides (MXs) (M = Ge, Sn; X = S, Se, Te) and MoS₂ are systematically studied by first-principles calculations, including the vdW binding energy, the direction of an internal electric field and the electronic structure. The results predict that GeS/MoS₂, GeSe/MoS₂ and SnS/MoS₂ vdW heterojunctions are potential direct Z-scheme water-splitting photocatalysts with appropriate band alignments, a wide light absorption range and low effective charge-carrier mass. Furthermore, the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) activities of the heterojunctions as photocatalysts are predicted. The results indicate that SnS/MoS₂ with the Sn vacancy has a low Gibbs free energy of the HER (0.06 eV), and MoS₂ with the S edge can offer OER active sites. This study provides a theoretical basis for the further design and preparation of a new two-dimensional overall water-splitting photocatalyst, which is conducive to the development of efficient two-dimensional photocatalysts in the field of clean energy.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Synergetic Dual-Atom Catalysts: The Next Boom of Atomic Catalysts

Dual-atom catalysts (DACs) are an important branch of single-atom catalysts (SACs), in which the former can effectively break the dilemma faced by the traditional SACs. The synergetic effects between bimetallic atoms provide many active sites, promising to improve catalytic performance and even catalyze more complex reactions. This paper reviews the recent research progresses of two kinds of DACs, including homonuclear and heteronuclear DACs, and their applications in oxygen reduction, carbon dioxide reduction, hydrogen evolution, oxygen evolution, Zn-air batteries, tandem catalytic reactions, and so on. In addition, in order to promote the further development of DACs, the challenges and perspectives of DACs are put forward.

Space-Confined One-Step Growth of 2D MoO2 /MoS2 Vertical Heterostructures for Superior Hydrogen Evolution in Alkaline Electrolytes

2D material-based heterostructures are constructed by stacking or spicing individual 2D layers to create an interface between them, which have exotic properties. Here, a new strategy for the in situ growth of large numbers of 2D heterostructures on the centimeter-scale substrate is developed. In the method, large numbers of 2D MoS₂ , MoO₂ , or their heterostructures of MoO₂ /MoS₂ are controllably grown in the same setup by simply tuning the gap distance between metal precursor and growth substrate, which changes the concentration of metal precursors feed. A lateral force microscope is used first to identify the locations of each material in the heterostructures, which have MoO₂ on the top of MoS₂ . Noteworthy, the creation of a clean interface between atomic thin MoO₂ (metallic) and MoS₂ (semiconducting) results in a different electronic structure compared with pure MoO₂ and MoS₂ . Theoretical calculations show that the charge redistribution at such an interface results in an improved HER performance on the MoO₂ /MoS₂ heterostructures, showing an overpotential of 60 mV at 10 mA cm^-2 and a Tafel slope of 47 mV dec^-1 . This work reports a new strategy for the in situ growth of heterostructures on large-scale substrates and provides platforms to exploit their applications.

Electric-Field-Treated Ni/Co3O4 Film as High-Performance Bifunctional Electrocatalysts for Efficient Overall Water Splitting

HIGHLIGHTS

A novel physical approach is proposed to enhance the electrocatalytic performance by electric field. Under the action of electric field, some stable conductive filaments consisting of oxygen vacancies are formed in the Ni/Co₃O₄ film, which remarkably reduces the system resistivity. The electric-field-treated Ni/Co₃O₄ material exhibits significantly superior activity and stability as a bifunctional electrocatalyst for overall water splitting, and its performance exceeds the state-of-the-art electrocatalysts.

ABSTRACT

Rational design of bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with excellent activity and stability is of great significance, since overall water splitting is a promising technology for sustainable conversion of clean energy. However, most electrocatalysts do not simultaneously possess optimal HER/OER activities and their electrical conductivities are intrinsically low, which limit the development of overall water splitting. In this paper, a strategy of electric field treatment is proposed and applied to Ni/Co₃O₄ film to develop a novel bifunctional electrocatalyst. After treated by electric field, the conductive channels consisting of oxygen vacancies are formed in the Co₃O₄ film, which remarkably reduces the resistance of the system by almost 2 × 10⁴ times. Meanwhile, the surface Ni metal electrode is partially oxidized to nickel oxide, which enhances the catalytic activity. The electric-field-treated Ni/Co₃O₄ material exhibits super outstanding performance of HER, OER, and overall water splitting, and the catalytic activity is significantly superior to the state-of-the-art noble metal catalysts (Pt/C, RuO₂, and RuO₂ ǁ Pt/C couple). This work provides an effective and feasible method for the development of novel and efficient bifunctional electrocatalyst, which is also promising for wide use in the field of catalysis. [Image: see text]

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s40820-022-00889-3.

Djurleite Copper Sulfide-Coupled Cobalt Sulfide Interface for a Stable and Efficient Electrocatalyst

Transition metal sulfides (TMS) exhibit proliferated edge sites, facile electrode kinetics, and improved intrinsic electrical conductivity, which demand low potential requirements for total water splitting application. Here, we have propounded copper sulfide-coupled cobalt sulfide nanosheets grown on 3D nickel as an electrocatalyst for hydrogen (HER) and oxygen evolution (OER) reactions. The formation of djurleite copper sulfide with a Cu vacancy enables faster H⁺ ion transport and shows improved HER activity with a remarkably lower overpotential of 164 mV at 10 mA/cm², whereas cobalt-incorporated copper sulfide undergoes cation exchange during synthesis and shows elevated OER activity with a lower overpotential of 240 mV at 10 mA/cm² for the OER. Moreover, Cu_2-xS/Co is said to have a hybrid CoS-CoS₂ interface and provide Co²⁺ active sites on the surface and enable the fast adsorption of intermediate species (OH*, O*, and OOH*), which lowers the potential requirement. The copper vacancy and cation exchange with a hybrid CoS-CoS₂ structure are helpful in supplying more surface reactive species and faster ion transport for the HER and OER, respectively. The full-cell electrolyzer requires a very low potential of 1.58 V to attain a current density of 10 mA/cm², and it shows excellent stability for 50 h at 100 mA/cm² as confirmed by the chronopotentiometry test.

Constructing Reactive Micro-Environment in Basal Plane of MoS2 for pH-Universal Hydrogen Evolution Catalysis

MoS₂ represents a promising catalyst for the hydrogen evolution reaction (HER) in water splitting, but the inefficient catalytic activity in a pH-universal environment is an obstacle to developing practical applications. Boosting and balancing the water dissociation and hydrogen desorption kinetics is crucial in designing high-performance catalysts for the overall pH range. Herein, it is experimentally demonstrated that cobalt single-atom doping can effectively construct a reactive CoMoS micro-environment on the basal plane of MoS₂ and thus alter the uniformity of surface electron density, which is further confirmed by the theoretical results. The reactive micro-environment consisting of single-atom Co with the surrounding Mo and S atoms possesses excellent water dissociation and hydrogen desorption kinetics, exhibiting a superior performance of 36 mV at 10 mA cm^-2 with a Tafel slope of 33 mV dec^-1 in the alkaline condition. Meanwhile, it also shows worthy activity in the acidic (97 mV) and neutral (117 mV) environments. This work provides a facile strategy to improve the HER catalysis of MoS₂ in pH-universal environments.