1
|
Implantable Neural Microelectrodes: How to Reduce Immune Response. ACS Biomater Sci Eng 2024; 10:2762-2783. [PMID: 38591141 DOI: 10.1021/acsbiomaterials.4c00238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/10/2024]
Abstract
Implantable neural microelectrodes exhibit the great ability to accurately capture the electrophysiological signals from individual neurons with exceptional submillisecond precision, holding tremendous potential for advancing brain science research, as well as offering promising avenues for neurological disease therapy. Although significant advancements have been made in the channel and density of implantable neural microelectrodes, challenges persist in extending the stable recording duration of these microelectrodes. The enduring stability of implanted electrode signals is primarily influenced by the chronic immune response triggered by the slight movement of the electrode within the neural tissue. The intensity of this immune response increases with a higher bending stiffness of the electrode. This Review thoroughly analyzes the sequential reactions evoked by implanted electrodes in the brain and highlights strategies aimed at mitigating chronic immune responses. Minimizing immune response mainly includes designing the microelectrode structure, selecting flexible materials, surface modification, and controlling drug release. The purpose of this paper is to provide valuable references and ideas for reducing the immune response of implantable neural microelectrodes and stimulate their further exploration in the field of brain science.
Collapse
|
2
|
Electrochemical and Electrical Biosensors for Wearable and Implantable Electronics Based on Conducting Polymers and Carbon-Based Materials. Chem Rev 2024; 124:722-767. [PMID: 38157565 DOI: 10.1021/acs.chemrev.3c00392] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/03/2024]
Abstract
Bioelectronic devices are designed to translate biological information into electrical signals and vice versa, thereby bridging the gap between the living biological world and electronic systems. Among different types of bioelectronics devices, wearable and implantable biosensors are particularly important as they offer access to the physiological and biochemical activities of tissues and organs, which is significant in diagnosing and researching various medical conditions. Organic conducting and semiconducting materials, including conducting polymers (CPs) and graphene and carbon nanotubes (CNTs), are some of the most promising candidates for wearable and implantable biosensors. Their unique electrical, electrochemical, and mechanical properties bring new possibilities to bioelectronics that could not be realized by utilizing metals- or silicon-based analogues. The use of organic- and carbon-based conductors in the development of wearable and implantable biosensors has emerged as a rapidly growing research field, with remarkable progress being made in recent years. The use of such materials addresses the issue of mismatched properties between biological tissues and electronic devices, as well as the improvement in the accuracy and fidelity of the transferred information. In this review, we highlight the most recent advances in this field and provide insights into organic and carbon-based (semi)conducting materials' properties and relate these to their applications in wearable/implantable biosensors. We also provide a perspective on the promising potential and exciting future developments of wearable/implantable biosensors.
Collapse
|
3
|
Electrogelated drug-embedded silk/gelatin/rGO degradable electrode for anti-inflammatory applications in brain-implant systems. J Mater Chem B 2024; 12:1361-1371. [PMID: 38234194 DOI: 10.1039/d3tb02715e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2024]
Abstract
Implantable electrodes have raised great interest over the last years with the increasing incidence of neurodegenerative disorders. For brain implant devices, some key factors resulting in the formation of glial scars, such as mechanical mismatch and acute injury-induced inflammation, should be considered for material design. Therefore, in this study, a new biocompatible flexible electrode (e-SgG) with arbitrary shapes on a positive electrode was developed via electrogelation by applying a direct electrical voltage on a silk fibroin/gelatin/reduced graphene oxide composite hydrogel. The implantable flexible e-SgG-2 film with 1.23% rGO content showed high Young's modulus (11-150 MPa), which was sufficient for penetration under dried conditions but subsequently became a biomimetic brain tissue with low Young's modulus (50-3200 kPa) after insertion in the brain. At the same time, an anti-inflammatory drug (DEX) incorporated into the e-SgG-2 film can be electrically stimulated to exhibit two-stage release to overcome tissue inflammation during cyclic voltammetry via degradation by applying an AC field. The results of cell response to the SF/gelatin/rGO/DEX composite film showed that the released DEX could interrupt astrocyte growth to reduce the inflammatory response but showed non-toxicity toward neurons, which demonstrated a great potential for the application of the biocompatible and degradable e-SgG-D electrodes in the improvement of nerve tissue repair.
Collapse
|
4
|
Electro-Responsive Breathing Transition of Conductive Hydrogel for Broadband Kinetic Energy Harvesting. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2305837. [PMID: 37539740 DOI: 10.1002/adma.202305837] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2023] [Revised: 07/26/2023] [Indexed: 08/05/2023]
Abstract
Reclaiming kinetic energy from vibrating machines holds great promise for sustainable energy harvesting technologies. Nevertheless, the impulsive current induced by vibrations is incompatible with conventional energy storage devices. The energy-management system necessitates novel designs of soft materials for lightweight, miniaturized, and integrated high-frequency electrochemical devices. Here, this work develops a conductive hydrogel with an electro-responsive polymeric network. The electro-responsive breathing transition of the crosslinking points facilitates the expeditious formation of a localized electrolyte layer. This layer features an exceedingly high local charge density, surpassing that of a saturated electrolyte solution by an order of magnitude, and thus enabling rapid charge transport under the influence of an applied voltage. The micro-capacitor based on the gel exhibits record-high capacitance of ≈2 mF cm-2 when the frequency of energy input reaches up to 104 Hz. This work also demonstrates a prototype battery charger that harvests energy from a running car engine. This study presents a feasible strategy for waste energy recycling using integrated electrochemical devices, opening a new avenue for ambient energy management.
Collapse
|
5
|
Omnidirectional Printing of PEDOT:PSS for High-Conductivity Spanning Structures. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 38018535 DOI: 10.1021/acsami.3c14851] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/30/2023]
Abstract
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), a prominent conducting polymer, holds significance in both industry and academia. However, prevailing fabrication techniques struggle to build spanning features of PEDOT:PSS with both high electrical conductivity and fine resolution due to layerwise assembly in the xy plane. Here, we report an "omnidirectional printing and secondary doping" strategy to construct spanning, filamentary and out-of-plane 3D PEDOT:PSS with high conductivity. The pristine PEDOT:PSS suspension is homogeneously concentrated to form a printable ink with high solids (∼15 wt %) consisting of entangled PEDOT:PSS nanofibrils. Such ink shows a high storage modulus G' (43531 Pa) and a high yield stress τy (4325 Pa), thereby enabling omnidirectional printing. Secondary doping with sulfuric acid or other polar solvents is used to induce a synergetic process of PSS loss, conformational change, phase separation, and crystallinity enhancement in the printed structures, resulting in a remarkable enhancement of conductivity in dehydrated (65,378 S/m) and swollen (7190 S/m) states. As a proof-of-concept, 2D grids with a feature size of 15 μm and 3D overhanging arches are fabricated for high-performance transparent glass heaters and 3D interconnection, respectively. This work promises great potential for the development of advanced flexible electronics, wearable devices, and bioelectronics.
Collapse
|
6
|
Recent advances in 3D printable conductive hydrogel inks for neural engineering. NANO CONVERGENCE 2023; 10:41. [PMID: 37679589 PMCID: PMC10484881 DOI: 10.1186/s40580-023-00389-z] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2023] [Accepted: 08/23/2023] [Indexed: 09/09/2023]
Abstract
Recently, the 3D printing of conductive hydrogels has undergone remarkable advances in the fabrication of complex and functional structures. In the field of neural engineering, an increasing number of reports have been published on tissue engineering and bioelectronic approaches over the last few years. The convergence of 3D printing methods and electrically conducting hydrogels may create new clinical and therapeutic possibilities for precision regenerative medicine and implants. In this review, we summarize (i) advancements in preparation strategies for conductive materials, (ii) various printing techniques enabling the fabrication of electroconductive hydrogels, (iii) the required physicochemical properties of the printed constructs, (iv) their applications in bioelectronics and tissue regeneration for neural engineering, and (v) unconventional approaches and outlooks for the 3D printing of conductive hydrogels. This review provides technical insights into 3D printable conductive hydrogels and encompasses recent developments, specifically over the last few years of research in the neural engineering field.
Collapse
|
7
|
Direct Ink Writing of Pickering Emulsions Generates Ultralight Conducting Polymer Foams with Hierarchical Structure and Multifunctionality. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2301493. [PMID: 37093544 DOI: 10.1002/smll.202301493] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/08/2023] [Indexed: 05/03/2023]
Abstract
Porous materials with multiple hierarchy levels can be useful as lightweight engineering structures, biomedical implants, flexible functional devices, and thermal insulators. Numerous routes have integrated bottom-up and top-down approaches for the generation of engineering materials with lightweight nature, complex structures, and excellent mechanical properties. It nonetheless remains challenging to generate ultralight porous materials with hierarchical architectures and multi-functionality. Here, the combined strategy based on Pickering emulsions and additive manufacturing leads to the development of ultralight conducting polymer foams with hierarchical pores and multifunctional performance. Direct writing of the emulsified inks consisting of the nano-oxidant-hydrated vanadium pentoxide nanowires-generated free-standing scaffolds, which are stabilized by the interfacial organization of the nanowires into network structures. The following in situ oxidative polymerization transforms the nano-oxidant scaffolds into foams consisting of a typical conducting polymer-polyaniline. The lightweight polyaniline foams featured by hierarchical pores and high surface areas show excellent performances in the applications of supercapacitor electrodes, planar micro-supercapacitors, and gas sensors. This emerging technology demonstrates the great potential of a combination of additive manufacturing with complex fluids for the generation of functional solids with lightweight nature and adjustable structure-function relationships.
Collapse
|
8
|
Liquid-in-liquid printing of 3D and mechanically tunable conductive hydrogels. Nat Commun 2023; 14:4289. [PMID: 37463898 DOI: 10.1038/s41467-023-40004-7] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Accepted: 07/06/2023] [Indexed: 07/20/2023] Open
Abstract
Conductive hydrogels require tunable mechanical properties, high conductivity and complicated 3D structures for advanced functionality in (bio)applications. Here, we report a straightforward strategy to construct 3D conductive hydrogels by programable printing of aqueous inks rich in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) inside of oil. In this liquid-in-liquid printing method, assemblies of PEDOT:PSS colloidal particles originating from the aqueous phase and polydimethylsiloxane surfactants from the other form an elastic film at the liquid-liquid interface, allowing trapping of the hydrogel precursor inks in the designed 3D nonequilibrium shapes for subsequent gelation and/or chemical cross-linking. Conductivities up to 301 S m-1 are achieved for a low PEDOT:PSS content of 9 mg mL-1 in two interpenetrating hydrogel networks. The effortless printability enables us to tune the hydrogels' components and mechanical properties, thus facilitating the use of these conductive hydrogels as electromicrofluidic devices and to customize near-field communication (NFC) implantable biochips in the future.
Collapse
|
9
|
Recent Progress in Biomedical Sensors Based on Conducting Polymer Hydrogels. ACS APPLIED BIO MATERIALS 2023; 6:1720-1741. [PMID: 37115912 DOI: 10.1021/acsabm.3c00139] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/29/2023]
Abstract
Biosensors are increasingly taking a more active role in health science. The current needs for the constant monitoring of biomedical signals, as well as the growing spending on public health, make it necessary to search for materials with a combination of properties such as biocompatibility, electroactivity, resorption, and high selectivity to certain bioanalytes. Conducting polymer hydrogels seem to be a very promising materials, since they present many of the necessary properties to be used as biosensors. Furthermore, their properties can be shaped and enhanced by designing conductive polymer hydrogel-based composites with more specific functionalities depending on the end application. This work will review the recent state of the art of different biological hydrogels for biosensor applications, discuss the properties of the different components alone and in combination, and reveal their high potential as candidate materials in the fabrication of all-organic diagnostic, wearable, and implantable sensor devices.
Collapse
|
10
|
Micro/Nano-Fabrication of Flexible Poly(3,4-Ethylenedioxythiophene)-Based Conductive Films for High-Performance Microdevices. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023:e2301071. [PMID: 37069773 DOI: 10.1002/smll.202301071] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/06/2023] [Revised: 03/11/2023] [Indexed: 06/19/2023]
Abstract
With the increasing demands for novel flexible organic electronic devices, conductive polymers are now becoming the rising star for reaching such targets, which has witnessed significant breakthroughs in the fields of thermoelectric devices, solar cells, sensors, and hydrogels during the past decade due to their outstanding conductivity, solution-processing ability, as well as tailorability. However, the commercialization of those devices still lags markedly behind the corresponding research advances, arising from the not high enough performance and limited manufacturing techniques. The conductivity and micro/nano-structure of conductive polymer films are two critical factors for achieving high-performance microdevices. In this review, the state-of-the-art technologies for developing organic devices by using conductive polymers are comprehensively summarized, which will begin with a description of the commonly used synthesis methods and mechanisms for conductive polymers. Next, the current techniques for the fabrication of conductive polymer films will be proffered and discussed. Subsequently, approaches for tailoring the nanostructures and microstructures of conductive polymer films are summarized and discussed. Then, the applications of micro/nano-fabricated conductive films-based devices in various fields are given and the role of the micro/nano-structures on the device performances is highlighted. Finally, the perspectives on future directions in this exciting field are presented.
Collapse
|
11
|
Abstract
Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.
Collapse
|
12
|
An Efficiently Doped PEDOT:PSS Ink Formulation via Metastable Liquid-Liquid Contact for Capillary Flow-Driven, Hierarchically and Highly Conductive Films. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2205324. [PMID: 36634985 DOI: 10.1002/smll.202205324] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/07/2022] [Revised: 11/22/2022] [Indexed: 06/17/2023]
Abstract
With commercial electronics transitioning toward flexible devices, there is a growing demand for high-performance polymers such as poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS). Previous breakthroughs in promoting the conductivity of PEDOT:PSS, which mainly stem from solvent-treatment and transfer-printing strategies, remain as inevitable challenges due to the inefficient, unstable, and biologically incompatible process. Herein, a scalable fabrication of conducting PEDOT:PSS inks is reported via a metastable liquid-liquid contact (MLLC) method, realizing phase separation and removal of excess PSS simultaneously. MLLC-doped inks are further used to prepare ring-like films through a compromise between the coffee-ring effect and the Marangoni vortex during evaporation of droplets. The specific control over deposition conditions allows for tunable ring-like morphologies and preferentially interconnected networks of PEDOT:PSS nanofibrils, resulting in a high electrical conductivity of 6,616 S cm-1 and excellent optical transparency of the film. The combination of excellent electrical properties and the special morphology enables it to serve as electrodes for touch sensors with gradient pressure sensitivity. These findings not only provide new insight into developing a simple and efficient doping method for commercial PEDOT:PSS ink, but also offer a promising self-assembled deposition pattern of organic semiconductor films, expanding the applications in flexible electronics, bioelectronics as well as photovoltaic devices.
Collapse
|
13
|
Simultaneous Polymerization Acceleration and Mechanical Enhancement for Printing a Biomimetic PEDOT Adhesive by Coordinative and Orthogonal Ruthenium Photochemistry. ACS Macro Lett 2023; 12:433-439. [PMID: 36930947 DOI: 10.1021/acsmacrolett.2c00759] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/19/2023]
Abstract
Conductive hydrogels are promising material candidates in fields ranging from flexible sensors and electronic skin applications to personalized medical monitoring. However, developing intrinsically conductive polymer hydrogels (ICPHs) with high mechanical properties and excellent printability is still challenging. Here, we introduce a simultaneous polymerization acceleration and mechanical enhancement (SPAME) strategy to construct PEDOT-based ICPHs via the rational design of coordinative and orthogonal ruthenium photochemistry (CORP). This orthogonal photochemistry triggers the oxidative polymerization of EDOT and the coupling of phenols within seconds under blue light irradiation. Benefiting from the bifunctional EDTA-Fe design, the photoreleased Fe(III) accelerated the EDOT polymerization and shortened the preparation time of ICPHs to a few seconds. At the same time, the addition of EDTA-Fe enhanced their mechanical properties, and both the critical strains and maximum stresses of the hydrogel doubled. Furthermore, the introduction of phenol residues in PAA-Ph significantly shortened the gelation time from several minutes to about 7 s. Thus, this fast and controllable CORP chemistry is compatible with standard printing techniques for engineering hydrogels for complex multifunctional structures for multifunctional bioelectronics and devices.
Collapse
|
14
|
Mechanical Training Enabled Reinforcement of Polyrotaxane-Containing Hydrogel. Angew Chem Int Ed Engl 2023; 62:e202218313. [PMID: 36583510 DOI: 10.1002/anie.202218313] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2022] [Revised: 12/29/2022] [Accepted: 12/30/2022] [Indexed: 12/31/2022]
Abstract
Many strategies have been developed for constructing anisotropic hydrogels, however, it remains a challenge to fabricate hydrogels with anisotropic nanocrystalline domains from intrinsically soft networks. Here, we report a naphthotube-based polyrotaxane-containing hydrogel that can be reinforced via mechanical training. During the training process, the hydrogel can adopt reorientation of polymer chains to form anisotropic structures driven by external uniaxial force. Due to the multiple hydrogen bonding sites and movable feature of naphthotube, the sliding of naphthotube on PEG chains simultaneously inducing the zipping of adjacent polymer chains to form densely anisotropic nanocrystalline domains through hydrogen bonded networks. Thus, the trained hydrogel exhibits an enhanced tension stress of ≈110 kPa, which realize a remarkable enhancement of ≈10 times compare to initial state. This study provides a new tactic for improving the mechanical performance of soft materials.
Collapse
|
15
|
Enhancement of Self-Healing Efficacy of Conductive Nanocomposite Hydrogels by Polysaccharide Modifiers. Polymers (Basel) 2023; 15:polym15030516. [PMID: 36771818 PMCID: PMC9921321 DOI: 10.3390/polym15030516] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2022] [Revised: 01/01/2023] [Accepted: 01/02/2023] [Indexed: 01/20/2023] Open
Abstract
The proper design of a polysaccharide/hydrocolloid modifier significantly affects the conductivity, self-healing, and viscoelastic properties of nanocomposite hydrogels. Due to the presence of different functional groups, these hydrogels can participate in the covalent, hydrogen and dynamic bonding of a system. The improvement of interactions in this system can lead to the development of high-performance nanocomposite hydrogels. In this study, resilient, self-healing and self-adhesive conductive nanocomposite hydrogels were produced by multiple and diverse coordination connections between various polysaccharide-based modifiers (Arabic gum, sodium carboxymethyl cellulose, and xanthan), the poly(vinyl alcohol) (PVA) network and different graphene-based fillers. Graphene nanoplatelets (GNP), activated carbon black (ACB), and reduced graphene oxide (rGO) have distinct functionalized surfaces, which were analyzed by X-ray photoelectron spectroscopy (XPS). Furthermore, the introduction of fillers balanced the hydrogels' viscoelastic properties and electrical conductivity, providing the hydrogels with resilience, improved electrical conductivity, and extreme stretchability (5000%). The self-healing properties were analyzed using time-dependent measurements in a shear strain mode using an RSO Rheometer. The improvement in electrochemical and conductivity properties was confirmed by electrochemical impedance spectroscopy (EIS). The obtained conductive nanocomposite hydrogels design opens new possibilities for developing high-performance polysaccharide-based hydrogels with wearable electrical sensors and healthcare monitoring applications.
Collapse
|
16
|
Advances in the Translation of Electrochemical Hydrogel-Based Sensors. Adv Healthc Mater 2023; 12:e2201501. [PMID: 36300601 DOI: 10.1002/adhm.202201501] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2022] [Revised: 09/26/2022] [Indexed: 02/03/2023]
Abstract
Novel biomaterials for bio- and chemical sensing applications have gained considerable traction in the diagnostic community with rising trends of using biocompatible and lowly cytotoxic material. Hydrogel-based electrochemical sensors have become a promising candidate for their swellable, nano-/microporous, and aqueous 3D structures capable of immobilizing catalytic enzymes, electroactive species, whole cells, and complex tissue models, while maintaining tunable mechanical properties in wearable and implantable applications. With advances in highly controllable fabrication and processability of these novel biomaterials, the possibility of bio-nanocomposite hydrogel-based electrochemical sensing presents a paradigm shift in the development of biocompatible, "smart," and sensitive health monitoring point-of-care devices. Here, recent advances in electrochemical hydrogels for the detection of biomarkers in vitro, in situ, and in vivo are briefly reviewed to demonstrate their applicability in ideal conditions, in complex cellular environments, and in live animal models, respectively, to provide a comprehensive assessment of whether these biomaterials are ready for point-of-care translation and biointegration. Sensors based on conductive and nonconductive polymers are presented, with highlights of nano-/microstructured electrodes that provide enhanced sensitivity and selectivity in biocompatible matrices. An outlook on current challenges that shall be addressed for the realization of truly continuous real-time sensing platforms is also presented.
Collapse
|
17
|
Balanced Coexistence of Reversible and Irreversible Covalent Bonds in a Conductive Triple Polymeric Network Enables Stretchable Hydrogels with High Toughness and Adhesiveness. ACS APPLIED MATERIALS & INTERFACES 2022; 14:56395-56406. [PMID: 36484343 DOI: 10.1021/acsami.2c17676] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
The application of soft hydrogels to stretchable devices has attracted increasing attention in deformable bioelectronics owing to their unique characteristic, "modulus matching between materials and organs". Despite considerable progress, their low toughness, low conductivity, and absence of tissue adhesiveness remain substantial challenges associated with unstable skin-interfacing, where body movements undesirably disturb electrical signal acquisitions. Herein, we report a material design of a highly tough strain-dissipative and skin-adhesive conducting hydrogel fabricated through a facile one-step sol-gel transition and its application to an interactive human-machine interface. The hydrogel comprises a triple polymeric network where irreversible amide linkage of polyacrylamide with alginate and dynamic covalent bonds entailing conjugated polymer chains of poly(3,4-ethylenedioxythiophene)-co-(3-thienylboronic acid) are simultaneously capable of high stretchability (1300% strain), efficient strain dissipation (36,209 J/m2), low electrical resistance (590 Ω), and even robust skin adhesiveness (35.0 ± 5.6 kPa). Based on such decent characteristics, the hydrogel was utilized as a multifunctional layer for successfully performing either electrophysiological cardiac/muscular on-skin sensors or an interactive stretchable human-machine interface.
Collapse
|
18
|
Conductive polymer hydrogel-coated nanopipette sensor with tunable size. NANOTECHNOLOGY AND PRECISION ENGINEERING 2022. [DOI: 10.1063/10.0016501] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Nanopipette-based sensors are one of the most effective tools for detecting nanoparticles, bioparticles, and biomolecules. Quantitative analysis of nanoparticles with different shapes and electrical charges is achieved through measurement of the blockage currents that occur when particles pass through the nanopore. However, typical nanopipette sensors fabricated using a conventional needle-pulling method have a typical pore-diameter limitation of around 100 nm. Herein, we report a novel conductive hydrogel-composited nanopipette sensor with a tunable inner-pore diameter. This is made by electrodepositing poly(3,4-ethylenedioxythiophene) polystyrene sulfonate onto the surface of a nanopipette with a prefabricated sacrificial copper layer. Because of the presence of copper ions, the conductive polymer can stably adhere to the tip of the nanopipette to form a nanopore; when nanoparticles pass through the conductive nanopore, more distinct blocking events are observed. The size of the nanopore can be changed simply by adjusting the electrodeposition time. In this way, suitable nanopores can be obtained for highly sensitive screening of a series of particles with diameters of the order of tens of nanometers.
Collapse
|
19
|
Research on direct electron transfer of native glucose oxidase at PEDOT:PSS hydrogels modified electrode. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116738] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
20
|
Multitasking smart hydrogels based on the combination of alginate and poly(3,4-ethylenedioxythiophene) properties: A review. Int J Biol Macromol 2022; 219:312-332. [PMID: 35934076 DOI: 10.1016/j.ijbiomac.2022.08.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/17/2022] [Revised: 07/28/2022] [Accepted: 08/02/2022] [Indexed: 11/05/2022]
Abstract
Poly(3,4-ethylenedioxythiophene) (PEDOT), a very stable and biocompatible conducting polymer, and alginate (Alg), a natural water-soluble polysaccharide mainly found in the cell wall of various species of brown algae, exhibit very different but at the same complementary properties. In the last few years, the remarkable capacity of Alg to form hydrogels and the electro-responsive properties of PEDOT have been combined to form not only layered composites (PEDOT-Alg) but also interpenetrated multi-responsive PEDOT/Alg hydrogels. These materials have been found to display outstanding properties, such as electrical conductivity, piezoelectricity, biocompatibility, self-healing and re-usability properties, pH and thermoelectric responsiveness, among others. Consequently, a wide number of applications are being proposed for PEDOT-Alg composites and, especially, PEDOT/Alg hydrogels, which should be considered as a new kind of hybrid material because of the very different chemical nature of the two polymeric components. This review summarizes the applications of PEDOT-Alg and PEDOT/Alg in tissue interfaces and regeneration, drug delivery, sensors, microfluidics, energy storage and evaporators for desalination. Special attention has been given to the discussion of multi-tasking applications, while the new challenges to be tackled based on aspects not yet considered in either of the two polymers have also been highlighted.
Collapse
|
21
|
3D-Printed Electroactive Hydrogel Architectures with Sub-100 µm Resolution Promote Myoblast Viability. Macromol Biosci 2022; 22:e2200103. [PMID: 35596668 PMCID: PMC9879017 DOI: 10.1002/mabi.202200103] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2022] [Revised: 04/30/2022] [Indexed: 01/29/2023]
Abstract
3D-printed hydrogel scaffolds functionalized with conductive polymers have demonstrated significant potential in regenerative applications for their structural tunability, physiochemical compatibility, and electroactivity. Controllably generating conductive hydrogels with fine features, however, has proven challenging. Here, micro-continuous liquid interface production (μCLIP) method is utilized to 3D print poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels. With a unique in-situ polymerization approach, a sulfonated monomer is first incorporated into the hydrogel matrix and subsequently polymerized into a conjugated polyelectrolyte, poly(4-(2,3-dihydro-thieno[3,4-b][1,4]dioxin-2-ylmethoxy)-butane-1 sulfonic acid sodium salt (PEDOT-S). Rod structures are fabricated at different crosslinking levels to investigate PEDOT-S incorporation and its effect on bulk hydrogel electronic and mechanical properties. After demonstrating that PEDOT-S does not significantly compromise the structures of the bulk material, pHEMA scaffolds are fabricated via μCLIP with features smaller than 100 µm. Scaffold characterization confirms PEDOT-S incorporation bolstered conductivity while lowering overall modulus. Finally, C2C12 myoblasts are seeded on PEDOT-pHEMA structures to verify cytocompatibility and the potential of this material in future regenerative applications. PEDOT-pHEMA scaffolds promote increased cell viability relative to their non-conductive counterparts and differentially influence cell organization. Taken together, this study presents a promising new approach for fabricating complex conductive hydrogel structures for regenerative applications.
Collapse
|
22
|
Patterned Magnetofluids via Magnetic Printing and Photopolymerization for Multifunctional Flexible Electronic Sensors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:30332-30342. [PMID: 35730674 DOI: 10.1021/acsami.2c04755] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Liquid conductor-based flexible sensors with high mechanical deformability and reliable electrical reversibility have aroused great interest in electronic skin, soft robotics, environmental monitoring, and other fields. Herein, we develop a novel strategy to fabricate liquid conductor-based flexible sensors by combining ionic liquid-based magnetofluids (IL-MFs), magnetic printing, and photopolymerization techniques. The as-prepared sensors exhibit excellent electromechanical properties, such as a wide detection range, low hysteresis, fast response time, good durability, etc. Moreover, the gauge factors (GFs) of the sensor could be easily adjusted by changing the modulators with different line widths or patterns, and the strain sensors can also be designed for anisotropic monitoring. Apart from serving as strain sensors, the magnetofluid-based flexible sensors can be used to detect external pressure, human activities, and changes in temperature, illumination, and magnetic field as well. This work provides a facile strategy to fabricate liquid conductor-based multifunctional sensors. Such a magnetofluid-based sensor has a great promising future.
Collapse
|
23
|
Bioelectricity-coupling patches for repairing impaired myocardium. WILEY INTERDISCIPLINARY REVIEWS. NANOMEDICINE AND NANOBIOTECHNOLOGY 2022; 14:e1787. [PMID: 35233963 DOI: 10.1002/wnan.1787] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/14/2021] [Revised: 12/27/2021] [Accepted: 01/31/2022] [Indexed: 11/10/2022]
Abstract
Cardiac abnormalities, which account for extensive burdens on public health and economy, drive necessary attempts to revolutionize the traditional therapeutic system. Advances in cardiac tissue engineering have expanded a highly efficacious platform to address cardiovascular events, especially cardiac infarction. Current efforts to overcome biocompatible limitations highlight the constructs of a conductive cardiac patch to accelerate the industrial and clinical landscape that is amenable for patient-accurate therapy, regenerative medicine, disease modeling, and drug delivery. With the notion that cardiac tissue synchronically contracts triggered by electrical pulses, the cardiac patches based on conductive materials are developed and treated on the dysfunctional heart. In this review, we systematically summarize distinct conductive materials serving as the most promising alternatives (conductive nanomaterials, conductive polymers, piezoelectric polymers, and ionic electrolytes) to achieve electric signal transmission and engineered cardiac tissues. Existing applications are discussed considering how these patches containing conductive candidates are fabricated into diverse forms with major strategies. Ultimately, we try to define a new concept as a bioelectricity-coupling patch that provides a favorable cardiac micro-environment for cardiac functional activities. Underlying challenges and prospects are presented regarding industrial processing and cardiovascular treatment of conductive patch progress. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease.
Collapse
|
24
|
Wet-printing of PEDOT:PSS Microelectrodes for Gastric Slow Wave Recording. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2022; 2022:4868-4871. [PMID: 36086592 DOI: 10.1109/embc48229.2022.9870834] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Bioelectrical slow waves are fundamental to maintaining the normal motility of the gastrointestinal tract. Slow wave abnormalities are associated with several major digestive disorders. High-resolution electrical mapping arrays have been used to investigate pathological slow wave abnormalities. However, conventional electrode substrate materials are opaque with high mechanical modulus, which leads to non-compliance and sub-par contact with the organ, without additional manipulations. Here we developed highly conformal and transparent conducting polymer electrode arrays using the extrusion wet-printing technique. The performance of electrodes for the electrophysiological recording of the gastric slow wave was validated using in a pig model, against a previously validated reference array over 100 s recording window. The conducting polymer electrodes registered comparable frequency to the reference array ( 3.31±0.20 cpm vs. 3.27±0.07 cpm, p = 0.067), with lower amplitude ( 372±237 vs. ), and signal to noise ratio ( 10.92±7.83 vs. [Formula: see text]). Further adjustments to the deposition parameters and contact material will improve the performance of the conducting polymer array for future experimental applications. Clinical Relevance- These conducting polymer electrodes provide better compliance and minimized mechanical mismatch to the gut tissue thus allowing long-term monitoring and stimulation of the gut. This could be potentially extended to other organs as well.
Collapse
|
25
|
Digital selective transformation and patterning of highly conductive hydrogel bioelectronics by laser-induced phase separation. SCIENCE ADVANCES 2022; 8:eabo3209. [PMID: 35675404 PMCID: PMC9177068 DOI: 10.1126/sciadv.abo3209] [Citation(s) in RCA: 28] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/26/2022] [Accepted: 04/21/2022] [Indexed: 05/19/2023]
Abstract
The patterning of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hydrogels with excellent electrical property and spatial resolution is a challenge for bioelectronic applications. However, most PEDOT:PSS hydrogels are fabricated by conventional manufacturing processes such as photolithography, inkjet printing, and screen printing with complex fabrication steps or low spatial resolution. Moreover, the additives used for fabricating PEDOT:PSS hydrogels are mostly cytotoxic, thus requiring days of detoxification. Here, we developed a previously unexplored ultrafast and biocompatible digital patterning process for PEDOT:PSS hydrogel via phase separation induced by a laser. We enhanced the electrical properties and aqueous stability of PEDOT:PSS by selective laser scanning, which allowed the transformation of PEDOT:PSS into water-stable hydrogels. PEDOT:PSS hydrogels showed high electrical conductivity of 670 S/cm with 6-μm resolution in water. Furthermore, electrochemical properties were maintained even after 6 months in a physiological environment. We further demonstrated stable neural signal recording and stimulation with hydrogel electrodes fabricated by laser.
Collapse
|
26
|
Integratable photodetectors based on photopolymerized conductive polymer via femtosecond laser direct writing. OPTICS LETTERS 2022; 47:2630-2633. [PMID: 35648891 DOI: 10.1364/ol.461197] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2022] [Accepted: 04/26/2022] [Indexed: 06/15/2023]
Abstract
Conductive polymers have attracted a great deal of attention due to their remarkable electrical conductivity. However, the low solubility and inability to meet the limit for the flexible patterning fabrication ability of conductive polymers hinders their applications in miniaturized and integrated electronic devices. Here, femtosecond laser direct writing (FsLDW) is employed to achieve the in situ fabrication of polypyrrole (PPy) with flexibility. Notably, high-precision flexible patterning with a minimum feature size of 5.2 µm and spatial control over the polymerization of PPy is achieved. Moreover, PPy microwires are constructed into a photodetector that exhibits a responsivity of 644 A/W at 0.1-V bias under ultraviolet (UV) irradiation. Ultimately, an image sensor is fabricated by integrating multiple photodetectors, demonstrating the application potential of FsLDW technology for developing miniaturized and integrated electronic devices based on conductive polymers.
Collapse
|
27
|
Electrogenic Bacteria Promise New Opportunities for Powering, Sensing, and Synthesizing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2107902. [PMID: 35119203 DOI: 10.1002/smll.202107902] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Revised: 01/06/2022] [Indexed: 06/14/2023]
Abstract
Considerable research efforts into the promises of electrogenic bacteria and the commercial opportunities they present are attempting to identify potential feasible applications. Metabolic electrons from the bacteria enable electricity generation sufficient to power portable or small-scale applications, while the quantifiable electric signal in a miniaturized device platform can be sensitive enough to monitor and respond to changes in environmental conditions. Nanomaterials produced by the electrogenic bacteria can offer an innovative bottom-up biosynthetic approach to synergize bacterial electron transfer and create an effective coupling at the cell-electrode interface. Furthermore, electrogenic bacteria can revolutionize the field of bioelectronics by effectively interfacing electronics with microbes through extracellular electron transfer. Here, these new directions for the electrogenic bacteria and their recent integration with micro- and nanosystems are comprehensively discussed with specific attention toward distinct applications in the field of powering, sensing, and synthesizing. Furthermore, challenges of individual applications and strategies toward potential solutions are provided to offer valuable guidelines for practical implementation. Finally, the perspective and view on how the use of electrogenic bacteria can hold immeasurable promise for the development of future electronics and their applications are presented.
Collapse
|
28
|
3D MXene/PEDOT:PSS Composite Aerogel with a Controllable Patterning Property for Highly Sensitive Wearable Physical Monitoring and Robotic Tactile Sensing. ACS APPLIED MATERIALS & INTERFACES 2022; 14:23877-23887. [PMID: 35467850 DOI: 10.1021/acsami.2c03350] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
MXene based composite conductive aerogels have been extensively investigated as sensitive materials for wearable pressure sensors owing to their effective 3D network microstructures and the excellent conductivity of MXene. In this work, we fabricated a 3D porous Ti3C2Tx MXene/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) composite aerogel (MPCA) with a controllable patterning property utilizing the Cu-assisted electrogelation method. The prepared composite aerogel can be assembled into pressure sensors for wearable physical monitoring and high-resolution sensor microarrays for robotic tactile sensing. The multi-interactions between MXene and PEDOT:PSS enable the MPCA to have a stable 3D conductive network, which consequently enhances both the mechanical flexibility and the piezoresistive property of the MPCA. Thus, the fabricated pressure sensor demonstrating high sensitivity (26.65 kPa-1 within 0-2 kPa), fast response ability (106 ms), and excellent stability can be further applied for wearable physical monitoring. Moreover, due to the controllable patterning property of the electrogelation preparation method, a high-resolution pressure sensor microarray was successfully prepared as an artificial tactile interface, which can be attached to a robotic fingertip to directly recognize the tactile stimuli from human fingers and identify braille letters like human fingers. The proposed MPCA, endowed with a remarkable comprehensive property, particularly the highly sensitive sensing performance and controllable patterning property, demonstrates an enormous advantage and a great potentiality toward wearable electronics.
Collapse
|
29
|
Tissue-Like Optoelectronic Neural Interface Enabled by PEDOT:PSS Hydrogel for Cardiac and Neural Stimulation. Adv Healthc Mater 2022; 11:e2102160. [PMID: 34969168 DOI: 10.1002/adhm.202102160] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/08/2021] [Revised: 11/29/2021] [Indexed: 01/01/2023]
Abstract
Optoelectronic biointerfaces have made a significant impact on modern science and technology from understanding the mechanisms of the neurotransmission to the recovery of the vision for blinds. They are based on the cell interfaces made of organic or inorganic materials such as silicon, graphene, oxides, quantum dots, and π-conjugated polymers, which are dry and stiff unlike a cell/tissue environment. On the other side, wet and soft hydrogels have recently been started to attract significant attention for bioelectronics because of its high-level tissue-matching biomechanics and biocompatibility. However, it is challenging to obtain optimal opto-bioelectronic devices by using hydrogels requiring device, heterojunction, and hydrogel engineering. Here, an optoelectronic biointerface integrated with a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate), PEDOT:PSS, hydrogel that simultaneously achieves efficient, flexible, stable, biocompatible, and safe photostimulation of cells is demonstrated. Besides their interfacial tissue-like biomechanics, ≈34 kPa, and high-level biocompatibility, hydrogel-integration facilitates increase in charge injection amounts sevenfolds with an improved responsivity of 156 mA W-1 , stability under mechanical bending , and functional lifetime over three years. Finally, these devices enable stimulation of individual hippocampal neurons and photocontrol of beating frequency of cardiac myocytes via safe charge-balanced capacitive currents. Therefore, hydrogel-enabled optoelectronic biointerfaces hold great promise for next-generation wireless neural and cardiac implants.
Collapse
|
30
|
A highly flexible Ni-Co MOF nanosheet coated Au/PDMS film based wearable electrochemical sensor for continuous human sweat glucose monitoring. Analyst 2022; 147:1440-1448. [PMID: 35262099 DOI: 10.1039/d1an02214h] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
The development of flexible substrate materials and nanomaterials with high electrochemical performance is of great significance for constructing efficient wearable electrochemical sensors for real-time health monitoring. Herein, a wearable electrochemical sweat sensor based on a Ni-Co MOF nanosheet coated Au/polydimethylsiloxane (PDMS) film was prepared for continuous monitoring of the glucose level in sweat with high sensitivity. First, a stretchable Au/PDMS film based three-electrode system was prepared by chemical deposition of a gold layer on the hydrophilic treated PDMS. Then, Ni-Co MOF nanosheets with high electrocatalytic activity were synthesized by a facile solvothermal method and modified on the Au/PDMS electrode. The electrocatalytic activity of the Ni-Co MOF nanosheets synthesized under different Ni : Co ratios was investigated. The Ni-Co MOF/Au/PDMS (NCAP) film electrode showed excellent electrochemical performance for glucose detection with a wide linear range of 20 μM to 790 μM and a high sensitivity of 205.1 μA mM-1 cm-2. In addition, the flexible sensor shows high stability and a good electrochemical response to glucose when stretched and bent to different levels. Moreover, it maintained long-term stability and high selectivity for glucose monitoring. Lastly, a sweat-absorbent cloth was used to cover the working area of the sensor and was fixed with a needle and thread to form a wearable sweat glucose sensor. The sensor can be attached to the skin for stable, accurate and continuous monitoring of glucose levels in human sweat for one day. This work validates the potential of our high-performance wearable sensor for out-of-clinic health monitoring.
Collapse
|
31
|
Thermoresponsive PEDOT:PSS/PNIPAM conductive hydrogels as wearable resistive sensors for breathing pattern detection. Polym J 2022. [DOI: 10.1038/s41428-022-00626-y] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
32
|
Multifunctionally wearable monitoring with gelatin hydrogel electronics of liquid metals. MATERIALS HORIZONS 2022; 9:961-972. [PMID: 35179166 DOI: 10.1039/d1mh02030g] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Hydrogel-based flexible electronics have been of widespread interest in recent years. However, current hydrogel electronics have limitations, such as poor biocompatibility, non-reusability, low electrical response to deformation and being single-function. GelMA is a gelatin-based hydrogel that has been widely used in the biological field, such as in tissue repair and drug delivery. Could it be a good choice for high biocompatibility wearable electronics? Here, by controlling the replacement rate of amine and hydroxy functionalities, we made the common brittle GelMA into a highly stretchable hydrogel. And we report for the first time GelMA hydrogel electronics with liquid metals (LMGE), which could be fabricated by simply injecting liquid metals into the internal microchannels of the GelMA hydrogels (GelMA-30). With the unique biocompatibility, outstanding air and ion permeability, and great mechanical properties of GelMA-30, as well as the low toxicity, high conductivity and high rheology of liquid metals, LMGE can not only monitor movement changes and even the heartbeat of rats, but can also be used as a wireless monitor to supervise secretions produced during human exercise. The design of LMGE provides a general strategy for the manufacture of bio-flexible hydrogel electronics, which opens the way for the development of multi-functional biomimetic materials for integrated monitoring and repair for biomedical applications.
Collapse
|
33
|
Electrode surface rebuilding for electrochemical assembling of conductive PEDOT:PSS hydrogel towards biosensing. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116183] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
34
|
An integrated and conductive hydrogel-paper patch for simultaneous sensing of Chemical-Electrophysiological signals. Biosens Bioelectron 2022; 198:113855. [PMID: 34871834 DOI: 10.1016/j.bios.2021.113855] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2021] [Accepted: 11/27/2021] [Indexed: 12/11/2022]
Abstract
Simultaneous monitoring of electrophysiological and biochemical signals is of great importance in healthcare and fitness management, while the fabrication of highly integrated and flexible devices is crucial to these applications. Herein, we devised a multifunctional and flexible hydrogel-paper patch (HPP) that was capable of simultaneously real-time monitoring of electrocardiogram (ECG) signal and biochemical signal (glucose content) in sweat during exercise. The self-assembly of the highly porous PEDOT:PSS hydrogel on paper fiber provided the HPP with good conductivity and hydrophilic wettability for efficient electron transmission and substance diffusion, thereby enabling it to serve as a low-impedance ECG electrode and a highly sensitive glucose sensor. Additionally, the spontaneous capillary flow effect allows the paper patch to be used as microfluidic channels for the collect and analysis of sweat. Moreover, the HPP is integrated with a flexible printed circuit board (FPCB) and works as a multifunctional wearable device mounted on the chest for real-time monitoring of electrophysiological and biochemical signals during exercise.
Collapse
|
35
|
Regenerative rehabilitation with conductive biomaterials for spinal cord injury. Acta Biomater 2022; 139:43-64. [PMID: 33326879 DOI: 10.1016/j.actbio.2020.12.021] [Citation(s) in RCA: 32] [Impact Index Per Article: 16.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2020] [Revised: 11/24/2020] [Accepted: 12/09/2020] [Indexed: 02/07/2023]
Abstract
The individual approaches of regenerative medicine efforts alone and rehabilitation efforts alone have not yet fully restored function after severe spinal cord injury (SCI). Regenerative rehabilitation may be leveraged to promote regeneration of the spinal cord tissue, and promote reorganization of the regenerated neural pathways and intact spinal circuits for better functional recovery for SCI. Conductive biomaterials may be a linchpin that empowers the synergy between regenerative medicine and rehabilitation approaches, as electrical stimulation applied to the spinal cord could facilitate neural reorganization. In this review, we discuss current regenerative medicine approaches in clinical trials and the rehabilitation, or neuromodulation, approaches for SCI, along with their respective translational limitations. Furthermore, we review the translational potential, in a surgical context, of conductive biomaterials (e.g., conductive polymers, carbon-based materials, metallic nanoparticle-based materials) as they pertain to SCI. While pre-formed scaffolds may be difficult to translate to human contusion SCIs, injectable composites that contain blended conductive components and can form within the injury may be more translational. However, given that there are currently no in vivo SCI studies that evaluated conductive materials combined with rehabilitation approaches, we discuss several limitations of conductive biomaterials, including demonstrating safety and efficacy, that will need to be addressed in the future for conductive biomaterials to become SCI therapeutics. Even so, the use of conductive biomaterials creates a synergistic opportunity to merge the fields of regenerative medicine and rehabilitation and redefine what regenerative rehabilitation means for the spinal cord. STATEMENT OF SIGNIFICANCE: For spinal cord injury (SCI), the individual approaches of regenerative medicine and rehabilitation are insufficient to fully restore functional recovery; however, the goal of regenerative rehabilitation is to combine these two disparate fields to maximize the functional outcomes. Concepts similar to regenerative rehabilitation for SCI have been discussed in several reviews, but for the first time, this review considers how conductive biomaterials may synergize the two approaches. We cover current regenerative medicine and rehabilitation approaches for SCI, and the translational advantages and disadvantages, in a surgical context, of conductive biomaterials used in biomedical applications that may be additionally applied to SCI. Furthermore, we identify the current limitations and translational challenges for conductive biomaterials before they may become therapeutics for SCI.
Collapse
|
36
|
Additive Manufacturing of Ti 3 C 2 -MXene-Functionalized Conductive Polymer Hydrogels for Electromagnetic-Interference Shielding. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2106253. [PMID: 34784072 DOI: 10.1002/adma.202106253] [Citation(s) in RCA: 45] [Impact Index Per Article: 22.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/10/2021] [Revised: 10/27/2021] [Indexed: 06/13/2023]
Abstract
The ongoing miniaturization of devices and development of wireless and implantable technologies demand electromagnetic interference (EMI)-shielding materials with customizability. Additive manufacturing of conductive polymer hydrogels with favorable conductivity and biocompatibility can offer new opportunities for EMI-shielding applications. However, simultaneously achieving high conductivity, design freedom, and shape fidelity in 3D printing of conductive polymer hydrogels is still very challenging. Here, an aqueous Ti3 C2 -MXene-functionalized poly(3,4-ethylenedioxythiophene):polystyrene sulfonate ink is developed for extrusion printing to create 3D objects with arbitrary geometries, and a freeze-thawing protocol is proposed to transform the printed objects directly into highly conductive and robust hydrogels with high shape fidelity on both the macro- and microscale. The as-obtained hydrogel exhibits a high conductivity of 1525.8 S m-1 at water content up to 96.6 wt% and also satisfactory mechanical properties with flexibility, stretchability, and fatigue resistance. Furthermore, the use of the printed hydrogel for customizable EMI-shielding applications is demonstrated. The proposed easy-to-manufacture approach, along with the highlighted superior properties, expands the potential of conductive polymer hydrogels in future customizable applications and represents a real breakthrough from the current state of the art.
Collapse
|
37
|
Solution-processable, soft, self-adhesive, and conductive polymer composites for soft electronics. Nat Commun 2022; 13:358. [PMID: 35042877 PMCID: PMC8766561 DOI: 10.1038/s41467-022-28027-y] [Citation(s) in RCA: 63] [Impact Index Per Article: 31.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2021] [Accepted: 01/04/2022] [Indexed: 02/07/2023] Open
Abstract
Soft electronics are rising electronic technologies towards applications spanning from healthcare monitoring to medical implants. However, poor adhesion strength and significant mechanical mismatches inevitably cause the interface failure of devices. Herein we report a self-adhesive conductive polymer that possesses low modulus (56.1-401.9 kPa), high stretchability (700%), high interfacial adhesion (lap-shear strength >1.2 MPa), and high conductivity (1-37 S/cm). The self-adhesive conductive polymer is fabricated by doping the poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) composite with a supramolecular solvent (β-cyclodextrin and citric acid). We demonstrated the solution process-based fabrication of self-adhesive conductive polymer-based electrodes for various soft devices, including alternating current electroluminescent devices, electromyography monitoring, and an integrated system for the visualization of electromyography signals during muscle training with an array of alternating current electroluminescent devices. The self-adhesive conductive polymer-based electronics show promising features to further develop wearable and comfortable bioelectronic devices with the physiological electric signals of the human body readable and displayable during daily activities.
Collapse
|
38
|
Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes. ACS APPLIED MATERIALS & INTERFACES 2022; 14:1615-1625. [PMID: 34968042 DOI: 10.1021/acsami.1c21591] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most prospering transparent conductive materials for flexible optoelectronic devices, which arises from its nonpareil features of low-cost solution processability, tunable conductivity, high transparency, and superior mechanical flexibility. However, acidity and hygroscopicity of PSS chains cause a decrease in conductivity, substrate corrosion, and device degradation. This work proposes a facile and effective direct doping strategy of sodium 3-methylsalicylate to enhance the conductivity, alleviate the acidity, and improve the stability of PEDOT:PSS electrodes, simultaneously. Owing to the formation of weaker acid and PSS-Na, PSS chains are disentangled from the coiled PEDOT:PSS complexes, leading to the phase separation of PEDOT:PSS and the formation of fibril-like PEDOT domains. Eventually, the sodium 3-methylsalicylate-modified PEDOT:PSS electrode is employed in flexible organic light-emitting diodes with an outstanding external quantum efficiency of up to 25%. The improved performance is attributed to the more matched work function and the as-formed interfacial dipole. The sodium 3-methylsalicylate-modified PEDOT:PSS electrode with high conductivity and transmittance, superior stability in the air as well as good mechanical flexibility has the potential to be the most promising transparent conductive material for flexible optoelectronic device applications.
Collapse
|
39
|
Fatigue Resistant Aerogel/Hydrogel Nanostructured Hybrid for Highly Sensitive and Ultrabroad Pressure Sensing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2104706. [PMID: 34873837 DOI: 10.1002/smll.202104706] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/06/2021] [Revised: 11/14/2021] [Indexed: 06/13/2023]
Abstract
Achieving high sensitivity over a broad pressure range remains a great challenge in designing piezoresistive pressure sensors due to the irreconcilable requirements in structural deformability against extremely high pressures and piezoresistive sensitivity to very low pressures. This work proposes a hybrid aerogel/hydrogel sensor by integrating a nanotube structured polypyrrole aerogel with a polyacrylamide (PAAm) hydrogel. The aerogel is composed of durable twined polypyrrole nanotubes fabricated through a sacrificial templating approach. Its electromechanical performance can be regulated by controlling the thickness of the tube shell. A thicker shell enhances the charge mobility between tube walls and thus expedites current responses, making it highly sensitive in detecting low pressure. Moreover, a nucleotide-doped PAAm hydrogel with a reversible noncovalent interaction network is harnessed as the flexible substrate to assemble the aerogel/hydrogel hybrid sensor and overcome sensing saturation under extreme pressures. This highly stretchable and self-healable hybrid polymer sensor exhibits linear response with high sensitivity (Smin > 1.1 kPa-1 ), ultrabroad sensing range (0.12-≈400 kPa), and stable sensing performance over 10 000 cycles at the pressure of 150 kPa, making it an ideal sensing device to monitor pressures from human physiological signals to significant stress exerted by vehicles.
Collapse
|
40
|
Recent advances in conductive polymer hydrogel composites and nanocomposites for flexible electrochemical supercapacitors. Chem Commun (Camb) 2021; 58:185-207. [PMID: 34881748 DOI: 10.1039/d1cc05526g] [Citation(s) in RCA: 33] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
Flexible electrochemical supercapacitors have shown great potential in the next-generation wearable and implantable energy-storage devices. Conductive polymer hydrogels usually possess unique porosity, high conductivity, and broadly tunable properties through molecular designs and structural regulations, thus holding tremendous promise as high-performance electrodes and electrolytes for flexible electrochemical supercapacitors. Numerous chemical and structural designs have provided unlimited opportunities to tune the properties of conductive polymer hydrogels to match the various practical demands. Various electrically and ionically conductive hydrogels have been developed to fabricate novel electrodes and electrolytes with satisfactory mechanical and electrochemical performance. This feature article focuses on the fabrication and applications of conductive polymer hydrogel composites and nanocomposites as respective electrodes and electrolytes for flexible electrochemical supercapacitors. First, we introduce the representative strategies to prepare electrically and ionically conductive polymer hydrogels. Second, conductive polymer hydrogel composites and nanocomposites as supercapacitor electrodes and electrolytes are presented and discussed. Finally, challenges and perspectives on conductive polymer hydrogel composites and nanocomposites for future flexible electrochemical supercapacitors are presented.
Collapse
|
41
|
Micropatterned PEDOT with Enhanced Electrochromism and Electrochemical Tunable Diffraction. ACS APPLIED MATERIALS & INTERFACES 2021; 13:58011-58018. [PMID: 34797985 DOI: 10.1021/acsami.1c17897] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Micro-nanofabrication of conductive polymers (CPs) with functional structures is in great demand in organic electronic devices, micro-optics, and flex sensors. Here, we report the fabrication of micropatterned poly(3,4-ethylenedioxythiophene) (PEDOT) and its applications on flexible electrochromic devices and tunable diffractive optics. The localized electropolymerization of 3,4-ethylenedioxythiophene at the electrode/agarose gel stamping interface through an electrochemical wet stamping (E-WETS) technique is used to fabricate PEDOT with functional microstructures. PEDOT microdots, micro-rectangles, and interdigitated array microelectrodes are fabricated with submicron tolerance and ∼2 μm smallest feature size. Furthermore, the flexible PEDOT electrochromic devices consisting of the logo of Xiamen University are fabricated with a reversible switch of absorptivity. The improved optical and coloration-amperometric responses of electrochromism are demonstrated because of the enhanced charge transport rate of the micropatterned PEDOT. The electrochromism of the 2D PEDOT micropatterns is further used as a binary diffractive optical element to modulate the intensity and efficiency of diffracted 2D structural light because of the switchable absorptivity during doping and dedoping processes. When the potential is switched from 1 to -1 V to tune the absorptivity at ∼600 nm from low to high, the intensity of zero-order diffraction light spot decreases with the intensity of other order diffraction light spots increasing dramatically. The results demonstrate that E-WETS provides an alternative method for the fabrication of CPs with functional micro-nanostructures. The electrochemical tunable diffraction with high reversibility and fast response is of potential applications in micro-optics and flex sensors.
Collapse
|
42
|
Polyacrylamide/carboxymethyl chitosan double‐network hydrogels with high conductivity and mechanical toughness for flexible sensors. J Appl Polym Sci 2021. [DOI: 10.1002/app.51993] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
43
|
PEDOT:PSS: From conductive polymers to sensors. NANOTECHNOLOGY AND PRECISION ENGINEERING 2021. [DOI: 10.1063/10.0006866] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
44
|
|
45
|
Rapid prototyping of heterostructured organic microelectronics using wax printing, filtration, and transfer. JOURNAL OF MATERIALS CHEMISTRY. C 2021; 9:14596-14605. [PMID: 34765224 PMCID: PMC8552910 DOI: 10.1039/d1tc03599a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2021] [Accepted: 09/02/2021] [Indexed: 05/05/2023]
Abstract
Conducting polymers are the natural choice for soft electronics. However, the main challenge is to pattern conducting polymers using a simple and rapid method to manufacture advanced devices. Filtration of conducting particle dispersions using a patterned membrane is a promising method. Here, we show the rapid prototyping of various micropatterned organic electronic heterostructures of PEDOT:PSS by inducing the formation of microscopic hydrogels, which are then filtered through membranes containing printed hydrophobic wax micropatterns. The hydrogels are retained on the un-patterned, hydrophilic regions, forming micropatterns, achieving a resolution reaching 100 μm. We further solve the problem of forming stacked devices by transferring the acidified PEDOT:PSS micropattern using the adhesive tape transfer method to form vertical heterostructures with other micropatterned electronic colloids such as CNTs, which are patterned using a similar technique. We demonstrate a number of different heterostructure devices including micro supercapacitors and organic electrochemical transistors and also demonstrate the use of acidified PEDOT:PSS microstructures in cell cultures to enable bioelectronics.
Collapse
|
46
|
Enhanced electrochemical performance of neural electrodes based on
PEDOT
:
PSS
hydrogel. J Appl Polym Sci 2021. [DOI: 10.1002/app.51804] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
|
47
|
Abstract
![]()
The plasma membrane
(PM) is often described as a wall, a physical
barrier separating the cell cytoplasm from the extracellular matrix
(ECM). Yet, this wall is a highly dynamic structure that can stretch,
bend, and bud, allowing cells to respond and adapt to their surrounding
environment. Inspired by shapes and geometries found in the biological
world and exploiting the intrinsic properties of conductive polymers
(CPs), several biomimetic strategies based on substrate dimensionality
have been tailored in order to optimize the cell–chip coupling.
Furthermore, device biofunctionalization through the use of ECM proteins
or lipid bilayers have proven successful approaches to further maximize
interfacial interactions. As the bio-electronic field aims at narrowing
the gap between the electronic and the biological world, the possibility
of effectively disguising conductive materials to “trick”
cells to recognize artificial devices as part of their biological
environment is a promising approach on the road to the seamless platform
integration with cells.
Collapse
|
48
|
Conducting polymer hydrogels as a sustainable platform for advanced energy, biomedical and environmental applications. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 786:147430. [PMID: 33964778 DOI: 10.1016/j.scitotenv.2021.147430] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2021] [Revised: 04/08/2021] [Accepted: 04/25/2021] [Indexed: 06/12/2023]
Abstract
Environmentally friendly polymeric materials and derivative technologies play increasingly important roles in the sustainable development of our modern society. Conducting polymer hydrogels (CPHs) synergizing the advantageous characteristics of conventional hydrogels and conducting polymers are promising to satisfy the requirements of environmental sustainability. Beyond their use in energy and biomedical applications that require exceptional mechanical and electrical properties, CPHs are emerging as promising contaminant adsorbents owing to their porous network structure and regulable functional groups. Here, we review the currently available strategies for synthesizing CPHs, focusing primarily on multifunctional applications in energy storage/conversion, biomedical engineering and environmental remediation, and discuss future perspectives and challenges for CPHs in terms of their synthesis and applications. It is envisioned to stimulate new thinking and innovation in the development of next-generation sustainable materials.
Collapse
|
49
|
Highly transparent, adhesive, stretchable and conductive PEDOT:PSS/polyacrylamide hydrogels for flexible strain sensors. Colloids Surf A Physicochem Eng Asp 2021. [DOI: 10.1016/j.colsurfa.2021.126897] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
50
|
Superhydrophobic-Substrate-Assisted Construction of Free-Standing Microcavity-Patterned Conducting Polymer Films. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:e2100949. [PMID: 34245121 PMCID: PMC8425917 DOI: 10.1002/advs.202100949] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/09/2021] [Revised: 05/05/2021] [Indexed: 06/13/2023]
Abstract
Patterned conducting polymer films with unique structures have promising prospects for application in various fields, such as actuation, water purification, sensing, and bioelectronics. However, their practical application is hindered because of the limitations of existing construction methods. Herein, a strategy is proposed for the superhydrophobic-substrate-assisted construction of free-standing 3D microcavity-patterned conducting polymer films (McPCPFs) at micrometer resolution. Easy-peeling and nondestructive transfer properties are achieved through electrochemical polymerization along the solid/liquid/gas triphase interface on micropillar-structured substrates. The effects of the wettability and geometrical parameters of the substrates on the construction of McPCPFs are systematically investigated in addition to the evolution of the epitaxial growth along the triphase interface at different polymerization times. The McPCPFs can be easily peeled from superhydrophobic surfaces using ethanol because of weak adhesion and nondestructively transferred to various substrates taking advantage of the capillarity. Furthermore, sensitive light-driven McPCPF locomotion on organic liquid surfaces is demonstrated. Ultimately, a facile strategy for the construction of free-standing 3D microstructure-patterned conducting polymer films is proposed, which can improve productivity and applicability of the films in different fields and expand the application scope of superwettable interfaces.
Collapse
|