3D-Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels

Redox-active electrolyte-based printed ionologic devices

Ionic devices, such as electrochemical capacitor diodes (CAPodes) and gate-controlled CAPodes with transistor-like gating characteristics (G-CAPodes), offer a novel approach to energy-efficient and nature-inspired logic computing. Their miniaturization and integration render them ideal for ion-transistor circuits, enabling the regulation and signaling of ions and biomolecules. Here, we report an asymmetric system to achieve a potential-driven ion pump for CAPode based on a redox-active Keggin-type electrolyte. This unidirectional capacity is achieved through asymmetric polarization between a plane metal and a porous carbon electrode, enabling selective redox reactions on the metal surface. The nanoporous carbon effectively balances the charge on the redox electrode, while redox couples control the working voltage range. Printed ionologic devices are demonstrated for logic gates, and an integrated NAND (NOT-AND) circuit was constructed using two CAPodes and one G-CAPode. This work proposes a concept for switchable iontronic devices, providing a deeper understanding and applicability of these devices.

A conformation-driven percolative interface architecture in phase-engineered 3D printed graphene/PEDOT:PSS supercapacitors enabling ultra-high energy density and superior ion transport

3D-Printed supercapacitive graphene electrodes often face significant challenges, such as high interfacial impedance and restricted ion diffusion at the microscopic level, leading to poor capacitance scaling, reduced energy delivery, and constrained kinetic performance. To address these issues, poly(3,4-ethylenedioxythiophene)polystyrene sulfonate (PEDOT:PSS) is employed as an interface mediator. Phase-engineering of PEDOT:PSS enables the formation of conformation-driven percolative interfaces, establishing bicontinuous reaction fronts that improve electron transport and ion diffusivity. Consequently, 3D-printed highly loaded supercapacitors successfully accommodate ultra-high energy density and excellent kinetic performance. This approach effectively mitigates the inherent limitations of 3D-printed graphene electrodes, facilitating their use in energy-intensive electronic devices.

Advances in Ice-Templated Graphene Aerogels: Fabrication, Properties, and Applications

Graphene has been one of the most widely explored two-dimensional (2D) assemblies due to its outstanding mechanical, electrical, and thermal properties resulting from its unique characteristics of high anisotropy and strong carbon-carbon bonds. Aerogels, characterized by their ultralow density and ultrahigh specific surface area, stand out as leading porous materials. Therefore, the integration of graphene and aerogels would boost the development of multifunctional porous materials. Among the various methods for the fabrication of aerogels, ice-templating has received significant interest due to its ecofriendly nature as a physical process, its broad applicability across material systems, and its proficiency in constructing abundant structures for multifunctionalities. Consequently, ice-templating has become a prevalent technique for the efficient assembly of graphene nanosheets into aerogels with the inherited properties of graphene, the multifunctionality derived from diverse constituents, and the well-controlled architecture. In this review, we systematically summarize the development and progress of ice-templated graphene-based aerogels. Initially, we introduce the fabrication process of these aerogels, elaborating each step from precursor preparation to freezing, drying, and post-treatment. Subsequently, we demonstrate the multifunctional applications of ice-templated graphene aerogels with various macroarchitectures and microstructures. Finally, this review concludes with a straightforward summary, highlighting the challenges and opportunities associated with the ice-templated fabrication of graphene-based aerogels. This systematic review of graphene aerogels aims to offer new insights into the design and ice-templated fabrication of innovative aerogels with multiscale architecture and multifunctionalities, which are crucial for a variety of engineering applications.

Laser Upcycling of Hemoglobin Protein Biowaste into Engineered Graphene Aerogel Architectures for 3D Supercapacitors

Graphene aerogels (GAs) with engineered architectures are a promising material for applications ranging from filtration to energy storage/conversion. However, current preparation approaches involve the combination of multiple intrinsically-different methodologies to achieve graphene-synthesis and architecture-engineering, complicating the entire procedure. Here, a novel approach to prepare GAs with engineered architectures based on the laser-upcycling of protein biowaste, hemoglobin, is introduced. Laser scanning achieves graphene-synthesis concurrently with architecture-engineering through the localized graphitization of hemoglobin along the laser-scan path, enabling the direct preparation of engineered GAs. The laser-upcycled GAs are uniquely decorated with fibrous graphitic structures, which significantly improves the surface area. Such structural formation is attributable to the inherent iron content of hemoglobin which leads to the formation of iron-based nanoparticles that catalyze the formation of nano-structured graphene. By leveraging the high electrical conductivity and unique structural morphology, the laser-upcycled GAs are applied as electrodes of symmetrical 3D supercapacitors. The fabricated supercapacitors exhibited a high specific capacitance (≈54.9 F g-1) and excellent cycle stability (≈94% retention), attributable to the laser-engineered architecture facilitating ion diffusion even for thick electrodes. Not only does this study provide a novel approach to prepare GAs with engineered architectures but showcases the potential of laser-upcycling in preparing advanced functional materials for future devices.

Architectural design and optimization of internal structures in 3D printed electrodes for superior supercapacitor performance

The architecture of electrodes plays a pivotal role in the transfer and transportation of charges during electrochemical reactions. Selecting optimal electrode materials and devising well-conceived electrode structures can substantially enhance the electrochemical performance of devices. This manuscript leverages 3D printing technology to fabricate asymmetric supercapacitor devices featuring regular layered configurations. By investigating the impact of various materials on the internal architecture of printed electrodes, we establish a stratified electrode structure with an orderly arrangement, thereby significantly improving asymmetric charge transfer between electrodes. The application of 3D printing technology to construct electrode structures effectively mitigates the agglomeration of electrode materials. The 3D-printed VCG//MXene devices demonstrate exceptional areal capacitance (205.57 mF cm-2) and energy density (60.03 μWh cm-2), with a power density of 0.174 W cm-2. Consequently, selecting appropriate materials for fabricating printable electrode structures and achieving efficient 3D printing is anticipated to offer novel insights into the construction and enhancement of miniature asymmetric micro-supercapacitor (MSCs) devices.

Introduction of 1D rGO nanoribbons as spacers between 2D MXenes for a high-performance electrode for supercapacitors

Two-dimensional (2D) transition-metal carbide Ti3C2TX (MXene) possesses good electrical conductivity, high specific surface areas and metal oxide-like surfaces, which make it ideal for application in supercapacitors with both high energy density and power density. However, similar to other 2D materials, the issue of self-stacking leads to narrower ion-transport channels, along with a drastic reduction in active sites, thus severely limiting the performance of MXene-based electrodes. To address this problem, this work proposes to introduce one-dimensional (1D) reduced graphene oxide (rGO) nanoribbons as spacers between MXene nanosheets to construct a composite structure for inhibiting self-stacking. As expected, owing to the steric effect and high aspect ratio of rGO nanoribbons, the fabricated MXene/rGO hybrid electrode, with the addition of 5 wt% graphene oxide (GO), exhibits a greatly improved specific capacitance (397.4 F g-1 at 5 mV s-1) and an unparalleled rate capability (with a capacitance retention of 52.9% at 2000 mV s-1). This work sheds significant light on the development of MXene-based materials for advanced energy storage devices.

Recent Research Progress of Porous Graphene and Applications in Molecular Sieve, Sensor, and Supercapacitor

Porous graphene, including 2D and 3D porous graphene, is widely researched recently. One of the most attractive features is the proper utilization of graphene defects, which combine the advantages of both graphene and porous materials, greatly enriching the applications of porous graphene in biology, chemistry, electronics, and other fields. In this review, the defects of graphene are first discussed to provide a comprehensive understanding of porous graphene. Then, the latest advancements in the preparation of 2D and 3D porous graphene are presented. The pros and cons of these preparation methods are discussed in detail, providing a direction for the fabrication of porous graphene. Moreover, various superior properties of porous graphene are described, laying the foundation for their promising applications. Owing to its abundant morphology, wide distribution of pore size, and remarkable properties benefited from porous structure, porous graphene can not only promote molecular diffusion and electron transfer but also expose more active sites. Consequently, a serious of applications containing gas sieving, liquid separation, sensors, and supercapacitors, are presented. Finally, the challenges confronted during preparation and characterization of porous graphene are discussed, offering guidance for the future development of porous graphene in fabrication, characterization, properties, and applications.

High Areal Capacitance and Rate Capability of 3D-Printed Thick Electrodes with Optimized Conductive Networks from the Core-Sheath Structure

Material extrusion 3D printing has received enormous attention to potentially overcome its limits by tailoring and designing thick electrodes. In this work, we prepared a thick reduced graphene oxide/carbon nanotube-reduced graphene oxide/carbon nanotubes/manganese oxide@carbon nanotubes (rGC-rGCMC) electrode with controlled lattice architectures, core-sheath structure, and hierarchical porosity by material coaxial extrusion 3D printing, freeze-drying, and thermal treatment. The volume ratios of core to sheath, including 100%-0%, 0%-100%, 20%-80%, 30%-70%, 40%-60%, and 50%-50%, were designed to investigate the influences of the core-sheath structure on thick electrodes. The electrodes with a core-sheath volume ratio of 30%-70% electrodes exhibited an enhanced areal specific capacitance of 588.27 mF cm-2 (39.48 F g-1) at a scan rate of 0.5 mA cm-2. All capacitance decays from core-sheath electrodes (20%-80%, 30%-70%, 40%-60%, and 50%-50%) were smaller than those from rGCMC (0%-100%) electrodes, indicating the improved rate capability from the core-sheath structure. On comparison of 30%-70% core-sheath electrodes with electrodes made of a homogeneous 30% rGC and 70% rGCMC mixture (30%+70%), lower capacitance (382.27 mF cm-2 and 25.66 F g-1 at 0.5 mA cm-2) of the 30%+70% mixture electrode without a core-sheath structure suggested less efficiency to harvest electrons from the redox reactions. Electrochemical impedance spectroscopy (EIS) data further supported and explained the resistances of thick electrodes with different volume ratios.

Self-discharge suppression by composite regenerated cellulose ion-selective separator for high-energy aqueous supercapacitors

Aqueous supercapacitors exhibit the advantage of high cycling stability, inherent safety and appealing energy density, and thus have long been considered an exceptional technology for efficient energy storage. However, in the absence of an electric field, the spontaneous transmembrane diffusion of ions leads to self-discharge or energy decay of supercapacitors. Herein, we propose a phase transformation strategy to design a porous regenerated cellulose and polyvinylidene difluoride composite separator with ion selectivity by utilizing cellulose dissolution regeneration with PVDF enhancement. Specifically, the anion selective property of PVDF screens the transmembrane diffusion of electrolyte ions, thereby suppressing the self-discharge of supercapacitors. The in-depth characterization indicated that the RC@PVDF separator applied to aqueous supercapacitors demonstrated high performance by maintaining a capacitance of 173 F g-1 after 20,000 cycles. After 24 h of self-discharge, the supercapacitor retained 59 % of its energy. In addition, the cross-linked network of regenerated cellulose provides critical properties for the ion-selective separator, including strong mechanical stability, excellent thermal stability (220 °C) and uniform pore structure (31 nm). This work is anticipated to provide considerable insight into the creative design of self-discharge suppression separators for long-term energy storage supercapacitors.

Large-Area Fabrication of Porous Graphene Networks on Carbon Fabric via Millisecond Photothermal Processing of Polyaniline for Supercapacitors

Supercapacitors demonstrate promising potential for flexible, multi-functional energy storage devices; however, their widespread adoption is confronted by fabrication challenges. To access a combination of desirable device qualities such as flexibility, lightweight, structural stability, and enhanced electrochemical performance, carbon fiber (CF) can be utilized as a current collector, alongside graphene as an electrochemically active material. Yet achieving a cost-effective, large-scale graphene production, particularly on CF, remains challenging. Here, a rapid (<1 min) photothermal approach is developed for the large-scale production of graphene directly onto CF, utilizing polyaniline (PANI) as a polymer precursor. The in situ electropolymerization of PANI on CF facilitates its rapid synthesis on large areas, followed by conversion into graphene networks, enabling the binder-free fabrication of supercapacitor devices. These devices exhibit an areal capacitance of 180 mF cm-2 (at 2 mA cm-2 in 1 m H2SO4), an order of magnitude higher than other fabric-based devices. Moreover, the devised photothermal strategy allows for one-step preparation of supercapacitor devices on areas exceeding 100 cm-2, yielding an absolute areal capacitance of 4.5 F. The proportional increase in capacitance with device area facilitates scaling and indicates the commercial viability of this approach for low-cost, energy-efficient, and high-throughput production of lightweight, high-performance graphene-based multi-functional supercapacitor devices.

Interpenetrated Structures for Enhancing Ion Diffusion Kinetics in Electrochemical Energy Storage Devices

The architectural design of electrodes offers new opportunities for next-generation electrochemical energy storage devices (EESDs) by increasing surface area, thickness, and active materials mass loading while maintaining good ion diffusion through optimized electrode tortuosity. However, conventional thick electrodes increase ion diffusion length and cause larger ion concentration gradients, limiting reaction kinetics. We demonstrate a strategy for building interpenetrated structures that shortens ion diffusion length and reduces ion concentration inhomogeneity. This free-standing device structure also avoids short-circuiting without needing a separator. The feature size and number of interpenetrated units can be adjusted during printing to balance surface area and ion diffusion. Starting with a 3D-printed interpenetrated polymer substrate, we metallize it to make it conductive. This substrate has two individually addressable electrodes, allowing selective electrodeposition of energy storage materials. Using a Zn//MnO2 battery as a model system, the interpenetrated device outperforms conventional separate electrode configurations, improving volumetric energy density by 221% and exhibiting a higher capacity retention rate of 49% compared to 35% at temperatures from 20 to 0 °C. Our study introduces a new EESD architecture applicable to Li-ion, Na-ion batteries, supercapacitors, etc.

Direct ink writing 3D printing of low-dimensional nanomaterials for micro-supercapacitors

Micro-supercapacitors (MSCs) have attracted significant attention for potential applications in miniaturized electronics due to their high power density, rapid charge/discharge rates, and extended lifespan. Despite the unique properties of low-dimensional nanomaterials, which hold tremendous potential for revolutionary applications, effectively integrating these attributes into MSCs presents several challenges. 3D printing is rapidly emerging as a key player in the fabrication of advanced energy storage devices. Its ability to design, prototype, and produce functional devices incorporating low-dimensional nanomaterials positions it as an influential technology. In this review, we delve into recent advancements and innovations in micro-supercapacitor manufacturing, with a specific focus on the incorporation of low-dimensional nanomaterials using direct ink writing (DIW) 3D printing techniques. We highlight the distinct advantages offered by low-dimensional nanomaterials, from quantum effects in 0D nanoparticles that result in high capacitance values to rapid electron and ion transport in 1D nanowires, as well as the extensive surface area and mechanical flexibility of 2D nanosheets. Additionally, we address the challenges encountered during the fabrication process, such as material viscosity, printing resolution, and seamless integration of active materials with current collectors. This review highlights the remarkable progress in the energy storage sector, demonstrating how the synergistic use of low-dimensional nanomaterials and 3D printing technologies not only overcomes existing limitations but also opens new avenues for the development and production of advanced micro-supercapacitors. The convergence of low-dimensional nanomaterials and DIW 3D printing heralds the advent of the next generation of energy storage devices, making a significant contribution to the field and laying the groundwork for future innovations.

Electrochemically Exfoliated Graphene Additive-Free Inks for 3D Printing Customizable Monolithic Integrated Micro-Supercapacitors on a Large Scale

Three-dimensional (3D) printing technology with enhanced fidelity can achieve multiple functionalities and boost electrochemical performance of customizable planar micro-supercapacitors (MSCs), however, precise structural control of additive-free graphene-based macro-assembly electrode for monolithic integrated MSCs (MIMSCs) remains challenging. Here, the large-scale 3D printing fabrication of customizable planar MIMSCs is reported utilizing additive-free, high-quality electrochemically exfoliated graphene inks, which is not required the conventional cryogenic assistance during the printing process and any post-processing reduction. The resulting MSCs reveal an extremely small engineering footprint of 0.025 cm2, exceptionally high areal capacitance of 4900 mF cm-2, volumetric capacitance of 195.6 F cm-3, areal energy density of 2.1 mWh cm-2, and unprecedented volumetric energy density of 23 mWh cm-3 for a single cell, surpassing most previously reported 3D printed MSCs. The 3D printed MIMSC pack is further demonstrated, with the maximum areal cell count density of 16 cell cm-2, the highest output voltage of 192.5 V and the largest output voltage per unit area of 56 V cm-2 up to date are achieved. This work presents an innovative solution for processing high-performance additive-free graphene ink and realizing the large-scale production of 3D printed MIMSCs for planar energy storage.

Strategic Way of Synthesizing Heteroatom-Doped Carbon Nano-onions Using Waste Chicken Fat Oil for Energy Storage Devices

An easy way of synthesizing low-cost carbon nanomaterials without the need for high-temperature processing approach is critical for energy storage applications because the demand has increased for affordable, long-term, and environmentally friendly synthesized carbon-based materials. Herein, we synthesized multilayered graphitic carbon nano-onions (CNOs) using an oil-wick flame pyrolysis approach, employing biowaste (chicken fat) oil as a cost-effective precursor. The prepared CNOs can provide enhanced ion movement and less resistance for electron transport by interconnecting CNO particles with one another. Furthermore, heteroatom (S,N)-doped CNOs (h-CNOs) were synthesized to optimize the hydrophilic and conductive properties of carbon materials, which eventually exalted the capacitive charge transfer kinetics. The h-CNOs demonstrated superior, highest specific capacitance of 261 F/g, while the undoped CNOs showed a capacitance of 180.6 F/g at a current density of 1 A/g. In addition to capacitance, the h-CNOs also demonstrated a rate capability of 69% and a good cycling stability of 97.5% under high current densities. An asymmetric supercapacitor was fabricated using the h-CNOs as the negative and MnCo2S4 (MCS) as the positive electrode. The device showed high energy and power performance of 32.8 Wh/kg and 7350 W/kg, respectively, with a capacitance retention of 97% over 5000 cycles. Considering the facile strategic way to produce novel carbonaceous materials derived from biowaste oil (chicken fat oil), this could be considered a potential advantage for commercial energy storage devices and may open the door to producing inexpensive, industrially revolutionizing energy storage devices.

Rational Design of High-Loading Electrodes with Superior Performances Toward Practical Application for Energy Storage Devices

High-loading electrodes play a crucial role in designing practical high-energy batteries as they reduce the proportion of non-active materials, such as current separators, collectors, and battery packaging components. This design approach not only enhances battery performance but also facilitates faster processing and assembly, ultimately leading to reduced production costs. Despite the existing strategies to improve rechargeable battery performance, which mainly focus on novel electrode materials and high-performance electrolyte, most reported high electrochemical performances are achieved with low loading of active materials (<2 mg cm-2). Such low loading, however, fails to meet application requirements. Moreover, when attempting to scale up the loading of active materials, significant challenges are identified, including sluggish ion diffusion and electron conduction kinetics, volume expansion, high reaction barriers, and limitations associated with conventional electrode preparation processes. Unfortunately, these issues are often overlooked. In this review, the mechanisms responsible for the decay in the electrochemical performance of high-loading electrodes are thoroughly discussed. Additionally, efficient solutions, such as doping and structural design, are summarized to address these challenges. Drawing from the current achievements, this review proposes future directions for development and identifies technological challenges that must be tackled to facilitate the commercialization of high-energy-density rechargeable batteries.

Enhancement of nitrate reduction in microbial fuel cells by acclimating biocathode potential: Performance, microbial community, and mechanism

The enhancement of nitrate reduction in microbial fuel cells (MFCs) by acclimating biocathode potential was studied. An MFC system was started up, and measured by cyclic voltammetry to determine a suitable potential region for acclimating biocathode. The experimental results revealed that potential acclimation could efficiently improve denitrification performance by relieving the phenomenon of nitrite accumulation, and optimum performance was obtained at -0.4 V with a total nitrogen removal efficiency of 87.4 %. Subsequently, the characteristics of electron transfer behaviors were measured, suggesting that a positive correlation between nitrate reduction and the contribution of direct electron transfer emerged. Furthermore, a denitrification mechanism was proposed. The results indicated that potential acclimation was conducive to enhancing denitrifying enzyme activity and that the electron transport system activity could be increased by 5.8 times. This study provides insight into the electron transfer characteristics and denitrification mechanisms in MFCs for nitrate reduction at specific acclimatization potentials.

Advances in Aerogels Formulations for Pulmonary Targeted Delivery of Therapeutic Agents: Safety, Efficacy and Regulatory Aspects

Aerogels are the 3D network of organic, inorganic, composite, layered, or hybrid-type materials that are used to increase the solubility of Class 1 (low solubility and high permeability) and Class 4 (poor solubility and low permeability) molecules. This approach improves systemic drug absorption due to the alveoli's broad surface area, thin epithelial layer, and high vascularization. Local therapies are more effective and have fewer side effects than systemic distribution because inhalation treatment targets the specific location and raises drug concentration in the lungs. The present manuscript aims to explore various aspects of aerogel formulations for pulmonary targeted delivery of active pharmaceutical agents. The manuscript also discusses the safety, efficacy, and regulatory aspects of aerogel formulations. According to projections, the global respiratory drug market is growing 4-6% annually, with short-term development potential. The proliferation of literature on pulmonary medicine delivery, especially in recent years, shows increased interest. Aerogels come in various technologies and compositions, but any aerogel used in a biological system must be constructed of a material that is biocompatible and, ideally, biodegradable. Aerogels are made via "supercritical processing". After many liquid phase iterations using organic solvents, supercritical extraction, and drying are performed. Moreover, the sol-gel polymerization process makes inorganic aerogels from TMOS or TEOS, the less hazardous silane. The resulting aerogels were shown to be mostly loaded with pharmaceutically active chemicals, such as furosemide-sodium, penbutolol-hemisulfate, and methylprednisolone. For biotechnology, pharmaceutical sciences, biosensors, and diagnostics, these aerogels have mostly been researched. Although aerogels are made of many different materials and methods, any aerogel utilized in a biological system needs to be made of a substance that is both biocompatible and, preferably, biodegradable. In conclusion, aerogel-based pulmonary drug delivery systems can be used in biomedicine and non-biomedicine applications for improved sustainability, mechanical properties, biodegradability, and biocompatibility. This covers scaffolds, aerogels, and nanoparticles. Furthermore, biopolymers have been described, including cellulose nanocrystals (CNC) and MXenes. A safety regulatory database is necessary to offer direction on the commercialization potential of aerogelbased formulations. After that, enormous efforts are discovered to be performed to synthesize an effective aerogel, particularly to shorten the drying period, which ultimately modifies the efficacy. As a result, there is an urgent need to enhance the performance going forward.

Insight into the Pseudocapacitive Behavior of Electroactive Biofilms in Response to Dynamic-Controlled Electron Transfer and Metabolism Kinetics for Current Generation in Water Treatment

Electroactive biofilms (EBs) engage in complex electron transfer and storage processes involving intracellular and extracellular mediators with temporary electron storage capabilities. Consequently, electroactive biofilms exhibit pseudocapacitive behaviors during substrate degradation processes. However, comprehensive systematic research in this area has been lacking. This study demonstrated that the pseudocapacitive property was an intrinsic characteristic of EBs. This property represents dynamic-controlled electron transfer and is critical in current generation, unlike noncapacitive responses. Nontransient charge and discharge experiments revealed a correlation between capacitive charge accumulation and current generation in EBs. Additionally, analysis of substrate degradation suggested that the maximum power density (Pmax) changed with the kinetic constants of COD degradation, with pseudocapacitances of EBs directly proportional to Pmax. The interaction networks of key latent variables were evaluated through partial least-squares path modeling analysis. The results indicated that cytochrome c was closely associated with the formation of pseudocapacitance in EBs. In conclusion, pseudocapacitance can be considered a valuable indicator for assessing the complex electron transfer behavior of EBs. Pseudocapacitive biofilms have the potential to efficiently regulate biological reactions and serve as a promising carbon-neutral and renewable strategy for energy generation and storage. An in-depth understanding of the intrinsic property of pseudocapacitive behavior in EBs can undoubtedly advance the development of this concept in the future.

Vanadium nitride decorated carbon cloth anode promotes aniline degradation and electricity generation of MFCs by efficiently enriching electroactive bacteria and promoting extracellular electron transfer

To increase the colonization of electroactive bacteria and accelerate the rate of extracellular electron transfer, a simple coated anode of microbial fuel cell was designed. Here, we took advantage of vanadium nitride (VN) particles to modify the carbon cloth (VN@CC). Compared with bare carbon cloth, the designed VN@CC bioanodes exhibited a larger electrochemically active area, better biocompatibility, and smaller charge transfer impedance. The MFC with VN@CC bioanodes achieved the maximum power density of 3.89 W m-2 and chemical oxygen demand removal rate of 84% when 1000 mg L-1 aniline was degraded, which were about 1.88 and 2.8 times that of CC. The morphology of biofilm and 16s rRNA gene sequence analysis proved that the VN@CC bioanodes facilitated the enrichment of electroactive bacteria (99.02%) and increased the ratio of fast electron transfer in the extracellular electron transfer, thus enhancing the MFC performance of aniline degradation and power output. This work disclosed that it was feasible to increase the overall performance of MFC by enhancing the EET efficiency and presented valuable insights for future work.

Co3 O4 Quantum Dots Intercalation Liquid-Crystal Ordered-Layered-Structure Optimizing the Performance of 3D-Printing Micro-Supercapacitors

The effects of near surface or surface mechanisms on electrochemical performance (lower specific capacitance density) hinders the development of 3D printed micro supercapacitors (MSCs). The reasonable internal structural characteristics of printed electrodes and the appropriate intercalation material can effectively compensate for the effects of surface or near-surface mechanisms. In this study, a layered structure is constructed inside an electrode using an ink with liquid-crystal characteristics, and the pore structure and oxidation active sites of the layered electrode are optimized by controlling the amount of Co3 O4 -quantum dots (Co3 O4 QDs). The Co3 O4 QDs are distributed in the pores of the electrode surface, and the insertion of Co3 O4 QDs can effectively compensate for the limitations of surface or near-surface mechanisms, thus effectively improving the pseudocapacitive characteristics of the 3D-printed MSCs. The 3D printed MSC exhibits a high area capacitance (306.13 mF cm-2 ) and energy density (34.44 µWh cm-2 at a power density of 0.108 mW cm-2 ). Therefore, selecting the appropriate materials to construct printable electrode structures and effectively adjusting material ratios for efficient 3D printing are expected to provide feasible solutions for the construction of various high-energy storage systems such as MSCs.

Direct Ink Writing 3D Printing for High-Performance Electrochemical Energy Storage Devices: A Minireview

Despite tremendous efforts that have been dedicated to high-performance electrochemical energy storage devices (EESDs), traditional electrode fabrication processes still face the daunting challenge of limited energy/power density or compromised mechanical compliance. 3D thick electrodes can maximize the utilization of z-axis space to enhance the energy density of EESDs but still suffer from limitations in terms of poor mechanical stability and sluggish electron/ion transport. Direct ink writing (DIW), an eminent branch of 3D printing technology, has gained popularity in the manufacture of 3D electrodes with intricately designed architectures and rationally regulated porosity, promoting a triple boost in areal mass loading, ion diffusion kinetics, and mechanical flexibility. This focus review highlights the fundamentals of printable inks and typical configurations of 3D-printed devices. In particular, preparation strategies for high-performance and multifunctional 3D-printed EESDs are systemically discussed and classified according to performance evaluation metrics such as high areal energy density, high power density, high volumetric energy density, and mechanical flexibility. Challenges and prospects for the fabrication of high-performance 3D-printed EESDs are outlined, aiming to provide valuable insights into this thriving field.

3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications

Three-dimensional (3D) printing, alternatively known as additive manufacturing, is a transformative technology enabling precise, customized, and efficient manufacturing of components with complex structures. It revolutionizes traditional processes, allowing rapid prototyping, cost-effective production, and intricate designs. The 3D printed graphene-based materials combine graphene's exceptional properties with additive manufacturing's versatility, offering precise control over intricate structures with enhanced functionalities. To gain comprehensive insights into the development of 3D printed graphene and graphene/polymer composites, this review delves into their intricate fabrication methods, unique structural attributes, and multifaceted applications across various domains. Recent advances in printable materials, apparatus characteristics, and printed structures of typical 3D printing techniques for graphene and graphene/polymer composites are addressed, including extrusion methods (direct ink writing and fused deposition modeling), photopolymerization strategies (stereolithography and digital light processing) and powder-based techniques. Multifunctional applications in energy storage, physical sensor, stretchable conductor, electromagnetic interference shielding and wave absorption, as well as bio-applications are highlighted. Despite significant advancements in 3D printed graphene and its polymer composites, innovative studies are still necessary to fully unlock their inherent capabilities.

Aerogel-Based Biomaterials for Biomedical Applications: From Fabrication Methods to Disease-Targeting Applications

Aerogel-based biomaterials are increasingly being considered for biomedical applications due to their unique properties such as high porosity, hierarchical porous network, and large specific pore surface area. Depending on the pore size of the aerogel, biological effects such as cell adhesion, fluid absorption, oxygen permeability, and metabolite exchange can be altered. Based on the diverse potential of aerogels in biomedical applications, this paper provides a comprehensive review of fabrication processes including sol-gel, aging, drying, and self-assembly along with the materials that can be used to form aerogels. In addition to the technology utilizing aerogel itself, it also provides insight into the applicability of aerogel based on additive manufacturing technology. To this end, how microfluidic-based technologies and 3D printing can be combined with aerogel-based materials for biomedical applications is discussed. Furthermore, previously reported examples of aerogels for regenerative medicine and biomedical applications are thoroughly reviewed. A wide range of applications with aerogels including wound healing, drug delivery, tissue engineering, and diagnostics are demonstrated. Finally, the prospects for aerogel-based biomedical applications are presented. The understanding of the fabrication, modification, and applicability of aerogels through this study is expected to shed light on the biomedical utilization of aerogels.

A 3D-Printed Proton Pseudocapacitor with Ultrahigh Mass Loading and Areal Energy Density for Fast Energy Storage at Low Temperature

The sluggish ionic transport in thick electrodes and freezing electrolytes has limited electrochemical energy storage devices in lots of harsh environments for practical applications. Here, a 3D-printed proton pseudocapacitor based on high-mass-loading 3D-printed WO₃ anodes, Prussian blue analog cathodes, and anti-freezing electrolytes is developed, which can achieve state-of-the-art electrochemical performance at low temperatures. Benefiting from the cross-scale 3D electrode structure using a 3D printing direct ink writing technique, the 3D-printed cathode realizes an ultrahigh areal capacitance of 7.39 F cm^-2 at a high areal mass loading of 23.51 mg cm^-2 . Moreover, the 3D-printed pseudocapacitor delivers an areal capacitance of 3.44 F cm^-2 and excellent areal energy density (1.08 mWh cm^-2 ). Owing to the fast ion kinetics in 3D electrodes and the high ionic conductivity of the hybrid electrolyte, the 3D-printed supercapacitor delivers 61.3% of the room-temperature capacitance even at -60 °C. This work provides an effective strategy for the practical applications of energy storage devices with complex physical structure at extreme temperatures.

Recent Advances in Porous Carbon Materials as Electrodes for Supercapacitors

Porous carbon materials have demonstrated exceptional performance in various energy and environment-related applications. Recently, research on supercapacitors has been steadily increasing, and porous carbon materials have emerged as the most significant electrode material for supercapacitors. Nonetheless, the high cost and potential for environmental pollution associated with the preparation process of porous carbon materials remain significant issues. This paper presents an overview of common methods for preparing porous carbon materials, including the carbon-activation method, hard-templating method, soft-templating method, sacrificial-templating method, and self-templating method. Additionally, we also review several emerging methods for the preparation of porous carbon materials, such as copolymer pyrolysis, carbohydrate self-activation, and laser scribing. We then categorise porous carbons based on their pore sizes and the presence or absence of heteroatom doping. Finally, we provide an overview of recent applications of porous carbon materials as electrodes for supercapacitors.

3D Printed Graphene-Based Metamaterials: Guesting Multi-Functionality in One Gain

Advanced functional materials with fascinating properties and extended structural design have greatly broadened their applications. Metamaterials, exhibiting unprecedented physical properties (mechanical, electromagnetic, acoustic, etc.), are considered frontiers of physics, material science, and engineering. With the emerging 3D printing technology, the manufacturing of metamaterials becomes much more convenient. Graphene, due to its superior properties such as large surface area, superior electrical/thermal conductivity, and outstanding mechanical properties, shows promising applications to add multi-functionality into existing metamaterials for various applications. In this review, the aim is to outline the latest developments and applications of 3D printed graphene-based metamaterials. The structure design of different types of metamaterials and the fabrication strategies for 3D printed graphene-based materials are first reviewed. Then the representative explorations of 3D printed graphene-based metamaterials and multi-functionality that can be introduced with such a combination are further discussed. Subsequently, challenges and opportunities are provided, seeking to point out future directions of 3D printed graphene-based metamaterials.

Ethanol-Induced Ni2+ -Intercalated Cobalt Organic Frameworks on Vanadium Pentoxide for Synergistically Enhancing the Performance of 3D-Printed Micro-Supercapacitors

The synthesis of metal-organic framework (MOF) nanocomposites with high energy density and excellent mechanical strength is limited by the degree of lattice matching and crystal surface structure. In this study, dodecahedral ZIF-67 is synthesized uniformly on vanadium pentoxide nanowires. The influence of the coordination mode on the surface of ZIF-67 in ethanol is also investigated. Benefitting from the different coordination abilities of Ni²⁺ , Co²⁺ , and N atoms, spatially separated surface-active sites are created through metal-ion exchange. Furthermore, the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional (3D) structure of ZIF-67 afforded the synthesis of hollow structures by controlling the amount of Ni doping. The formation of NiCo-MOF@CoOOH@V₂ O₅ nanocomposites is confirmed using X-ray absorption fine structure analysis. The high performance of the obtained composite is illustrated by fabricating a 3D-printed micro-supercapacitor, exhibiting a high area specific capacitance of 585 mF cm^-2 and energy density of 159.23 µWh cm^-2 (at power density = 0.34 mW cm^-2 ). The solvent/coordination tuning strategy demonstrated in this study provides a new direction for the synthesis of high-performance nanomaterials for electrochemical energy storage applications.

3D Printed Nitrogen-Doped Thick Carbon Architectures for Supercapacitor: Ink Rheology and Electrochemical Performance

The 3D printing technique offers huge opportunities for customized thick-electrode designs with high loading densities to enhance the area capacity in a limited space. However, key challenges remain in formulating 3D printable inks with exceptional rheological performance and facilitating electronic/ion transport in thick bulk electrodes. Herein, a hybrid ink consisting of woody-derived cellulose nanofibers (CNFs), multiwalled carbon nanotubes (MWCNTs), and urea is formulated for the 3D printing nitrogen-doped thick electrodes, in which CNFs serve as both dispersing and thickening agents for MWCNTs, whereas urea acts as a doping agent. By systematically tailoring the concentration-dependent rheological performance and 3D printing process of the ink, a variety of gel architectures with high geometric accuracy and superior shape fidelity are successfully printed. The as-printed gel architecture is then transformed into a nitrogen-doped carbon block with a hierarchical porous structure and superior electrochemical performance after freeze-drying and annealing treatments. Furthermore, a quasi-solid-state symmetric supercapacitor assembled with two interdigitated carbon blocks obtained by a 3D printing technique combined with a nitrogen-doping strategy delivers an energy density of 0.10 mWh cm-2 at 0.56 mW cm-2 . This work provides guidance for the formulation of the printable ink used for 3D printing of high-performance thick carbon electrodes.

Construction and application of carbon aerogels in microwave absorption

Electromagnetic pollution that threatens human health, the ecological environment and electronic equipment has been recognized as a serious environmental issue. In view of this, microwave absorbing materials (MAMs) are urgently required in modern society. Compared with traditional MAMs, carbon aerogels have inherent advantages in microwave absorption because of their high porosity and controllable conductive networks. Moreover, they are self-supporting 3D architectures with tailorable shapes, which satisfy most application scenarios. Therefore, carbon aerogels have aroused great interest in recent years and are being developed as promising absorption materials. In this review, we emphasize recent developments in carbon-aerogel-based MAMs constructed with some typical carbon nanomaterials, including graphene, carbon nanotubes and pyrolytic carbon. Their preparation methods, especially some newly developed strategies, are introduced as well as their influence on the structures and properties of aerogels. With a brief analysis of classic microwave absorption processes, we propose the requirements and strategies for modifying carbon aerogels to achieve ideal microwave absorption performance. Finally, we provide comprehensive comparisons of the MA performances of various carbon aerogels that show application potential and set forth the challenges and prospects of this kind of MAM.

One-step construction of Ti3C2Tx/MoS2 hierarchical 3D porous heterostructure for ultrahigh-rate supercapacitor

Heterostructures based on different materials can not only take full advantage of each material and overcome their limitations but also produce special effects for different applications. Here, a facile co-thermal decomposition strategy to engineer hierarchical 3D porous Ti₃C₂T_x/MoS₂ heterostructure is presented for improved energy storage performance. The specific Ti₃C₂T_x/MoS₂ heterostructure promotes the fast transportation of electrons and ions and fast redox reaction kinetics due to the 3D interconnected porous channels and thin exposed electroactive S-Mo-S edges. As a result, the 3D porous Ti₃C₂T_x/MoS₂ heterostructure exhibits a specific capacitance of 439 F g^-1 at a scan rate of 5 mV s^-1, a satisfactory capacitance of 169 F g^-1 (about 30 % of initial capacitance) under an ultra-high scan rate of 10,000 mV s^-1 and long cycle stability. Moreover, ultrahigh power energy of 30,000 W kg^-1 with a high energy density of 6.3 Wh kg^-1 with superior cyclic stability (91 % of initial capacitance after 10,000 cycles) has been achieved from the Ti₃C₂T_x/MoS₂-based symmetric supercapacitor. This work provides an archetype for designing and preparing hierarchical 3D porous heterostructure electrodes for the next-generation supercapacitor with the high power density and rate performances.

Recent advances in polyaniline-based micro-supercapacitors

The rapid development of the Internet of Things (IoTs) and proliferation of wearable electronics have significantly stimulated the pursuit of distributed power supply systems that are small and light. Accordingly, micro-supercapacitors (MSCs) have recently attracted tremendous research interest due to their high power density, good energy density, long cycling life, and rapid charge/discharge rate delivered in a limited volume and area. As an emerging class of electrochemical energy storage devices, MSCs using polyaniline (PANI) electrodes are envisaged to bridge the gap between carbonaceous MSCs and micro-batteries, leading to a high power density together with improved energy density. However, despite the intensive development of PANI-based MSCs in the past few decades, a comprehensive review focusing on the chemical properties and synthesis of PANI, working mechanisms, design principles, and electrochemical performances of MSCs is lacking. Thus, herein, we summarize the recent advances in PANI-based MSCs using a wide range of electrode materials. Firstly, the fundamentals of MSCs are outlined including their working principle, device design, fabrication technology, and performance metrics. Then, the working principle and synthesis methods of PANI are discussed. Afterward, MSCs based on various PANI materials including pure PANI, PANI hydrogel, and PANI composites are discussed in detail. Lastly, concluding remarks and perspectives on their future development are presented. This review can present new ideas and give rise to new opportunities for the design of high-performance miniaturized PANI-based MSCs that underpin the sustainable prosperity of the approaching IoTs era.

Construction of Nitrogen-abundant Graphyne Scaffolds via Mechanochemistry-Promoted Cross-Linking of Aromatic Nitriles with Carbide Toward Enhanced Energy Storage

The 2D graphyne-related scaffolds linked by carbon-carbon triple bonds have demonstrated promising applications in the field of catalysis and energy storage due to their unique features including high conductivity, permanent porosity, and electron-rich properties. However, the construction of related scaffolds is still mainly limited to the cross-linking of CaC₂ with multiple substituted aromatic halogens and there is still a lack of efficient methodology capable of introducing high-concentration heteroatoms within the architectures. The development of alternative and facile synthesis procedures to afford nitrogen-abundant graphyne materials is highly desirable yet challenging in the field of energy storage, particularly via the facile mechanochemical procedure under neat and ambient conditions. Herein, graphyne materials with abundant nitrogen-containing species (nitrogen content of 6.9-29.3 wt.%), tunable surface areas (43-865 m²  g^-1 ), and hierarchical porosity are produced via the mechanochemistry-driven pathway by deploying highly electron-deficient multiple substituted aromatic nitriles as the precursors, which can undergo cross-linking reaction with CaC₂ to afford the desired nitrogen-doped graphyne scaffolds efficiently. Unique structural features of the as-synthesized materials contributed to promising performance in supercapacitor-related applications, delivering high capacitance of 254.5 F g^-1 at 5 mV s^-1 , attractive rate performance, and good long-term stability.

Semi-Polycrystalline Polyaniline-Activated Carbon Composite for Supercapacitor Application

We report on the synthesis of activated carbon-semi-polycrystalline polyaniline (SPani-AC) composite material using in-situ oxidative polymerization of aniline on the carbon surface in an aqueous HCl medium at an elevated temperature of 60 °C. The electroactive polymeric composite material exhibits a uniformly distributed spindle-shaped morphology in scanning electron microscopy (SEM) and well-defined crystallographic lattices in the high-resolution transmission electron microscopy (TEM) images. The X-ray diffraction (XRD) spectrum reveals sharp peaks characteristic of crystalline polyaniline. The characteristic chemical properties of polyaniline are recorded using laser Raman spectroscopy. The cyclic voltammetry curves exhibit features of surface-redox pseudocapacitance. The specific capacitance calculated for the material is 507 F g^-1 at the scan rate of 10 mV s^-1. The symmetrical two-electrodes device exhibits a specific capacitance of 45 F g^-1 at a current density of 5 A g^-1. The capacitive retention calculated was found to be 96% up to 4500 continuous charge-discharge cycles and observed to be gradually declining at the end of 10,000 cycles. On the other hand, Coulombic efficiency was observed to be retained up to 85% until 4500 continuous charge-discharge cycles which declines up to 72% at the end of 10,000 cycles. The article also presents a detailed description of material synthesis, the formation of polyaniline (Pani) chains, and the role of material architecture in the performance as surface redox supercapacitor electrode.

A Bioinspired Hierarchical Fast Transport Network Boosting Electrochemical Performance of 3D Printed Electrodes

Current 3D printed electrodes suffer from insufficient multiscale transport speed, which limits the improvement of electrochemical performance of 3D printed electrodes. Herein, a bioinspired hierarchical fast transport network (HFTN) in a 3D printed reduced graphene oxide/carbon nanotube (3DP GC) electrode demonstrating superior electrochemical performance is constructed. Theoretical calculations reveal that the HFTN of the 3DP GC electrode increases the ion transport rate by more than 50 times and 36 times compared with those of the bulk GC electrode and traditional 3DP GC (T-3DP GC) electrode, respectively. Compared with carbon paper, carbon cloth, bulk GC electrode, and T-3DP GC electrode, the HFTN in 3DP GC electrode endows obvious advantages: i) efficient utilization of surface area for uniform catalysts dispersion during electrochemical deposition; ii) efficient utilization of catalysts enables the high mass activity of catalysts and low overpotential of electrode in electrocatalytic reaction. The cell of 3DP GC/Ni-NiO||3DP GC/NiS₂ demonstrates a low voltage of only 1.42 V to reach 10 mA cm^-2 and good stability up to 20 h for water splitting in alkaline conditions, which is superior to commercialized Pt/C||RuO₂ . This work demonstrates great potential in developing high-performance 3D printed electrodes for electrochemical energy conversion and storage.

Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

The rapid development of miniaturized electronic devices has greatly stimulated the endless pursuit of high-performance on-chip micro-supercapacitors (MSCs) delivering both high energy and power densities. To this end, an advanced three-dimensional (3D) microelectrode architecture design offers enormous opportunities due to high mass loading of active materials, large specific surface areas, fast ion diffusion kinetics, and short electron transport pathways. In this review, we summarize the recent advances in the rational design of 3D architectured microelectrodes including 3D dense microelectrodes, 3D nanoporous microelectrodes, and 3D macroporous microelectrodes. Furthermore, the emergent microfabrication strategies are discussed in detail in terms of charge storage mechanisms and structure-performance correlation for on-chip MSCs. Finally, we conclude with a perspective on future opportunities and challenges in this thriving field.

Arrayed Heterostructures of MoS2 Nanosheets Anchored TiN Nanowires as Efficient Pseudocapacitive Anodes for Fiber-Shaped Ammonium-Ion Asymmetric Supercapacitors

Nonmetallic ammonium ions that feature high safety, low molar mass, and small hydrated radius properties have shown great advantages in wearable aqueous supercapacitors. The construction of high-energy-density flexible ammonium-ion asymmetric supercapacitors (AASCs) is promising but still challenging due to the lack of high-capacitance pseudocapacitive anodes. Herein, freestanding core-shell heterostructures supported on carbon nanotube fibers were designed by anchoring MoS₂ nanosheets on nanowires (MoS₂@TiN/CNTF) as anodes for AASCs. With contributions of abundant active sites and conspicuous synergistic effects of multiple components for arrayed heterostructure engineering, the developed MoS₂@TiN/CNTF anodes exhibit a specific capacitance of 1102.5 mF cm^-2 at 2 mA cm^-2. Theoretical calculations confirm the dramatic enhancement of the binding strength of ammonium ions on the MoS₂ shell layer at the heterostructure, where a built-in electric field exists to accelerate the charge transfer. By utilizing a MnO₂/CNTF cathode and NH₄Cl/poly(vinyl alcohol) (PVA) as a gel electrolyte, quasi-solid-state fiber-shaped AASCs were successfully constructed, achieving a specific capacitance of 351.2 mF cm^-2 and an energy density of 195.1 μWh cm^-2, outperforming most recently reported fiber-shaped supercapacitors. This work provides a promising strategy to rationally design heterostructure engineering of MoS₂@TiN nanoarrays toward advanced anodes for application in next-generation AASCs.

Carbon Material-Based Aerogels for Gas Adsorption: Fabrication, Structure Design, Functional Tailoring, and Applications

Carbon material-based aerogels (CMBAs) have three-dimensional porous structure, high specific surface area, low density, high thermal stability, good electric conductivity, and abundant surface-active sites, and, therefore, have shown great application potential in energy storage, environmental remediation, electrochemical catalysis, biomedicine, analytical science, electronic devices, and others. In this work, we present recent progress on the fabrication, structural design, functional tailoring, and gas adsorption applications of CMBAs, which are prepared by precursor materials, such as polymer-derived carbon, carbon nanotubes, carbon nanofibers, graphene, graphene-like carbides, fullerenes, and carbon dots. To achieve this aim, first we introduce the fabrication methods of various aerogels, and, then, discuss the strategies for regulating the structures of CMBAs by adjusting the porosity and periodicity. In addition, the hybridization of CMBAs with other nanomaterials for enhanced properties and functions is demonstrated and discussed through presenting the synthesis processes of various CMBAs. After that, the adsorption performances and mechanisms of functional CMBAs towards CO₂, CO, H₂S, H₂, and organic gases are analyzed in detail. Finally, we provide our own viewpoints on the possible development directions and prospects of this promising research topic. We believe this work is valuable for readers to understand the synthesis methods and functional tailoring of CMBAs, and, meanwhile, to promote the applications of CMBAs in environmental analysis and safety monitoring of harmful gases.

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

Additive manufacturing (AM) has gained significant attention due to its ability to drive technological development as a sustainable, flexible, and customizable manufacturing scheme. Among the various AM techniques, direct ink writing (DIW) has emerged as the most versatile 3D printing technique for the broadest range of materials. DIW allows printing of practically any material, as long as the precursor ink can be engineered to demonstrate appropriate rheological behavior. This technique acts as a unique pathway to introduce design freedom, multifunctionality, and stability simultaneously into its printed structures. Here, a comprehensive review of DIW of complex 3D structures from various materials, including polymers, ceramics, glass, cement, graphene, metals, and their combinations through multimaterial printing is presented. The review begins with an overview of the fundamentals of ink rheology, followed by an in-depth discussion of the various methods to tailor the ink for DIW of different classes of materials. Then, the diverse applications of DIW ranging from electronics to food to biomedical industries are discussed. Finally, the current challenges and limitations of this technique are highlighted, followed by its prospects as a guideline toward possible futuristic innovations.

Review: Auxetic Polymer-Based Mechanical Metamaterials for Biomedical Applications

Over the last three decades but more particularly during the last 5 years, auxetic mechanical metamaterials constructed from precisely architected polymer-based materials have attracted considerable attention due to their fascinating mechanical properties. These materials present a negative Poisson's ratio and therefore unusual mechanical behavior, which has resulted in enhanced static modulus, energy adsorption, and shear resistance, as compared with the bulk properties of polymers. Novel advanced polymer processing and fabrication techniques, and in particular additive manufacturing, allow one to design complex and customizable polymer architectures that are particularly relevant to fabricate auxetic mechanical metamaterials. Although these metamaterials exhibit exotic mechanical properties with potential applications in several engineering fields, biomedical applications seem to be one of the most relevant with a growing number of articles published over recent years. As a result, special focus is needed to understand the potential of these structures and foster theoretical and experimental investigations on the potential benefits of the unusual mechanical properties of these materials on the way to high performance biomedical applications. The present Review provides up to date information on the recent progress of polymer-based auxetic mechanical metamaterials mainly fabricated using additive manufacturing methods with a special focus toward biomedical applications including tissue engineering as well as medical devices including stents and sensors.

Nickel cobalt sulfide coated iron nickel selenide hierarchical nanosheet arrays toward high-performance supercapacitors

Tailoring the electronic structure of nanomaterials by constructing core-shell heterostruture is a compelling strategy to design novel electrode materials with modified physiochemical properties for supercapacitors with improved performance. Herein, for the first time, we in situ fabricate iron nickel selenide (FeNiSe₂)@nickel cobalt sulfide (Ni_4.5Co_4.5S₈) core-shell nanosheet arrays on carbon cloth by an electrodeposition approach and a selenization treatment. This three-dimensional hierarchcial porous framework formed by plentiful interconnected nanosheets can expose numerous redox active sites with varied oxidation states and provide a conductive and porous skeleton for rapid ion/electrolyte ions transport. Benefiting from its modulated electronic structure and synergetic effect of metal-like FeNiSe₂ and Ni_4.5Co_4.5S₈, the as-synthesized FeNiSe₂@Ni_4.5Co_4.5S₈ electrode displays a large specific capacity of 236.9 mAh g^-1 at 1 A g^-1, remarkable rate capability with 80.6% capacity retention at 20 A g^-1, and stable cyclic performance, which are superior to those of pure FeNiSe₂ and Ni_4.5Co_4.5S₈ electrodes. Besides, the assembled FeNiSe₂@Ni_4.5Co_4.5S₈//porous carbon hybrid supercapacitor device offers an energy density of 69.0 Wh kg^-1 at 799.2 W kg^-1, and exceptional cycling stability with 91.2% capacity retention after 10,000 cycles. This work offers a synthetic strategy to explore core-shell electrode materials with tunable architecture and morphology for high-performance energy storage devices.

Mechanically Robust and Elastic Graphene/Aramid Nanofiber/Polyaniline Nanotube Aerogels for Pressure Sensors

The preparation of graphene-based aerogels with excellent mechanical strength, elasticity, and compressibility is still a challenge. Herein, we demonstrate a robust, elastic, and lightweight graphene/aramid nanofiber/polyaniline nanotube (rGO/ANF/PANIT) aerogel that is prepared by mixing graphene oxide (GO), ANF, and PANIT dispersions, followed by thermal treatment at 90 °C, freeze-drying, and a low-temperature annealing process. The PANIT bonds the graphene sheets tightly, benefitting the formation of composite gels. The ANF tightly interconnects the graphene sheets and further reinforces the composite network framework significantly, hence endowing rGO/ANF/PANIT composite aerogels with robust mechanical property. The prepared aerogels present a low density of ∼12 mg cm^-3, high conductivity, good resilience, and high compressibility. The rGO/ANF/PANIT aerogels as pressure sensors exhibit a high sensitivity of 1.73 kPa^-1, low detection limit (40 Pa), wide detection range, and excellent compressive cycle stability, highlighting the promising applications in pressure-sensitive electrical devices, including medical health detection, wearable electronics, and intelligent packaging fields.

Semi-Polycrystalline–Polyaniline Empowered Electrochemical Capacitor

We report on the formation of semi-polycrystalline polyaniline, a novel electroactive polymeric material synthesized by a modified surfactant-free chemical route and its enhanced electrochemical capacitive behavior. The material exhibits uniformly arranged spindle-shaped morphology in scanning electron microscopy and well-defined crystallographic lattices in the high-resolution transmission electron microscopy images. The X-ray diffraction spectrum reveals sharp peaks characteristic of a crystalline material. The characteristic chemical properties of polyaniline are recorded using Fourier transform infrared technology and laser Raman spectroscopies. The cyclic voltammetry curves exhibit features of surface-redox pseudocapacitance. The specific capacitance calculated for the material is 551 F g−1 at a scan rate of 10 mV s−1. The cycle stability and the coulombic efficiency recorded at a current density of 12 A g−1 exhibited good stability (90.3% and 99.5%, respectively) over 3000 cycles.