Lattice-Strain Engineering of Homogeneous NiS0.5 Se0.5 Core-Shell Nanostructure as a Highly Efficient and Robust Electrocatalyst for Overall Water Splitting

Strain trailing band engineering and phonon transport of high ZT ZrCoBi half-Heusler alloy: a mechanistic understanding from first principles

Enhancing the thermoelectric (TE) performance of materials requires simultaneous optimization of the power factor (PF) and reduction of thermal conductivity (κ), a challenging task due to their interdependent nature. This work demonstrates a concurrent enhancement of PF and reduction of κ in p-type half-Heusler compound, ZrCoBi. Using ab initio electronic structure calculations, we investigate the impact of isotropic tensile and compressive strains on the TE properties of materials. Our analysis encompasses electronic structure, mechanical properties, lattice dynamics, Seebeck coefficient, electrical and thermal conductivity, PF, and the figure of merit (ZT). The results reveal a unique strain-dependent behavior in the electronic properties of ZrCoBi, including a spurious band convergence effect, as identified through first-principles calculations incorporating spin-orbit coupling (SOC). Furthermore, the analysis shows that tensile strain effectively tunes the band gap, significantly altering the electronic structure and improving PF. At the same time, tensile strain induces significant changes in lattice dynamics, reducing lattice thermal conductivity (κL). These combined effects result in a fourfold increase in ZT at high temperatures. This study also provides a comprehensive framework for leveraging isotropic strain to achieve high-performance thermoelectric materials and guides the experimental exploration of enhanced ZT compounds.

Rapid synthesis of metastable materials for electrocatalysis

Metastable materials are considered promising electrocatalysts for clean energy conversions by virtue of their structural flexibility and tunable electronic properties. However, the exploration and synthesis of metastable electrocatalysts via traditional equilibrium methods face challenges because of the requirements of high energy and precise structural control. In this regard, the rapid synthesis method (RSM), with high energy efficiency and ultra-fast heating/cooling rates, enables the production of metastable materials under non-equilibrium conditions. However, the relationship between RSM and the properties of metastable electrocatalysts remains largely unexplored. In this review, we systematically examine the unique benefits of various RSM techniques and the mechanisms governing the formation of metastable materials. Based on these insights, we establish a framework, linking RSM with the electrocatalytic performance of metastable materials. Finally, we outline the future directions of this emerging field and highlight the importance of high-throughput approaches for the autonomous screening and synthesis of optimal electrocatalysts. This review aims to provide an in-depth understanding of metastable electrocatalysts, opening up new avenues for both fundamental research and practical applications in electrocatalysis.

Obtaining materials from local sources: surface modification engineering enabled substrates for water splitting

The preparation of an efficient electrode is the key to achieving efficient overall water-splitting for H2 production. Substrate surface modification engineering (SSME) provides a feasible method for preparing self-supported electrodes with high active site utilization, fast mass transport, and a simple fabrication process. This review summarizes and discusses the recent advances in preparing transition-metal-based HER/OER electrocatalysts via SSME. We first highlight the description and advantages of SSME, followed by the detailed introduction of electrocatalysts prepared via the SSME, such as hydroxides, oxyhydroxides, chalcogenides, phosphides, and borides. Finally, we provide the challenges and perspectives. We hope that this review will provide inspiration for researchers and stimulate the development of water splitting technology.

Layered-Hierarchical Dual-Lattice Strain Suppresses NixSe Surface Reconstruction for Stable OER in Alkaline Fresh/Seawater Splitting

Transition metal selenides (TMSe) are promising oxygen evolution reaction (OER) electrocatalysts but act as precursors rather than the actual active phase, transforming into amorphous oxyhydroxides during OER. This transformation, along with the formation of selenium oxyanions and unstable heterointerfaces, complicates the structure-activity relationship and reduces stability. This work introduces novel "layered-hierarchical dual lattice strain engineering" to inhibit the surface reconstruction of NixSe by modulating both the nickel foam (NF) substrate with Mo2N nanosheets (NM) and the NixSe nanorods-nanosheets catalytic layer (NiSe-Ni0.85Se-NiO, NSN) with ultrafast interfacial bimetallic amorphous NiFeOOH coating, achieving the optimized NM/NSN/NiFeOOH configuration. The NM substrate induces lattice strain, enhancing OER activity by improving electron transport and adhesion, while the NiFeOOH coating induces additional lattice strain, mitigating the surface reconstruction and oxidative degradation, reinforcing structural integrity. The NM/NSN/NiFeOOH catalyst demonstrates exceptional OER performance with low overpotentials of 208 mV@10 mA cm-2 and outstanding stability over 100 h at 100 mA cm-2 in alkaline freshwater and seawater. Theoretical analysis shows that NiFeOOH effectively prevents surface reconstruction and oxidative degradation by preserving Ni sites for optimal OER intermediate interactions while stabilizing the electronic environment. This work provides a novel strategy for enhancing the OER stability of TMSe and beyond.

Turn the Harm into A Benefit: Axial Cl Adsorption on Curved Fe-N4 Single Sites for Boosted Oxygen Reduction Reaction in Seawater

Seawater electrocatalysis is urgently needed for various energy storage and conversion systems. However, the adsorption of chloride ions (Cl-) to the active sites can degrade the oxygen reduction reaction (ORR) activity and stability, thus reducing the catalytic performance. In this paper, a curved FeN4 single atomic structure is designed by utilizing curvature engineering, which can turns the harmful Cl adsorption into a benefit on the Fe single site that changes the rate determining step of ORR and reduces the overall energy barrier according to density functional theory (DFT) calculation. Experimental studies reveal the prepared highly-curved single-atom iron catalyst (HC-FeSA) exhibits excellent ORR activity in different electrolytes, with half-wave potentials of 0.90 V in 0.1 M KOH, 0.90 V in simulated seawater, and 0.75 V in natural seawater, respectively. This work opens up an avenue for the synthesis of high-performance seawater-based single-atom ORR catalysts through regulating the local atomic curvature.

Unveiling the Roles of Lattice Strain by Ni Exsolution on Photothermal Reduction of CO2 Activity in BaTiO3 Catalyst

The lattice strain influences crystal orientation, facets exposed to external light, and atom rearrangement strongly to affect catalytic activity. However, how to rationally design a metal-oxide heterojunction catalyst with featuring lattice strain is a great challenge. Herein, a facile method is adopted to induce lattice strain upon in situ exsolution of Ni nanoparticles from Ba0.9Ti0.9Ni0.1O3-δ (BTNO) perovskite oxide, hereby enhancing the photothermal reduction of CO2. Lattice strain and Ni-exsolution dual regulation ensure that the Ni-anchored BTNO catalyst displays superb photothermal reduction activity of CO2. It shows a CO yield of 40.50 mmol gcat -1 h-1 and a CH4 yield of 19.62 mmol gcat -1 h-1, which are 14 and 73 times higher than those of BaTiO3. In addition, in situ DRIFTS and density functional theory (DFT) calculations reveal the CO2 reduction pathways and strain modulates the interfacial band structure and enhances the transfer of photogenerated charge. Consequently, this study provides a new approach for achieving highly efficient photothermal catalytic reduction of CO2 through strain engineering.

Dual chalcogenide coordination engineering on a self-supported alloy electrode for enhanced hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) holds substantial promise for large-scale green hydrogen production due to its cost-effectiveness, high performance, and scalability for repeated implementation. A promising strategy that involves a novel transition-metal chalcogenide with a self-supported framework can improve the reaction kinetics in the HER. We synthesize a nano three-dimensional self-supported HER catalyst via a straightforward one-step chemical vapor deposition process. This method incorporates a dual co-reaction with sulfur (S) and selenium (Se) onto a commercially available Monel alloy (CNSSe). The dynamics ion exchange redox reactions promote the formation of heterogeneous catalyst structures. Density functional theory (DFT) calculations indicate that the CNSSe catalyst exhibits low hydrogen coverage, as evidenced by a thermoneutral free energy of adsorbed hydrogen (ΔGH*) of 0.105 eV, which can be attributed to the dual introduction of S and Se. Consequently, the optimized CNSSe electrocatalyst achieves an enhancement in HER performance exceeding 100% compared to catalysts introduced exclusively with either S or Se. These results underscore the substantial potential of the optimized CNSSe electrocatalyst to improve both the performance and economic feasibility of HER technologies in alkaline water electrolysis.

The Interfacial Ni/Fe─O─Y Bonds Contribute to High-Efficiency Water Splitting

Developing economical and efficient electrocatalysts is critical for hydrogen energy industrialization through water electrolysis. Herein, a novel dual-site synergistic NiFe/Y2O3 hybrid with abundant interfacial Ni/Fe─O─Y bonds is designed by density functional theory (DFT) simulations. In situ Raman spectra combined with DFT calculations reveal that the interfacial Ni/Fe─O─Y units greatly promote H2O dissociation and optimize the adsorption of both H* and oxygen species, achieving excellent activity and durability for hydrogen evolution reaction. As expected, NiFe/Y2O3 exhibits a low overpotential of 27 mV at 10 mA cm-2 and robust stability of over 200 h at 1000 mA cm-2, and also outstanding water splitting performance with a low cell voltage of 1.64 V at 100 mA cm-2, showing significant potential for real-world applications.

Ni Vacancy and the Se/S Ratio Regulate the p-Band Center of Hollow NiSxSe2-x/Phase Junction CdS to Achieve High Efficiency and Broad-Spectrum Photocatalytic Performance

Rational design of defect engineering and interfacial built-in electric fields of photocatalysts is imperative for renewable energy conversion. Herein, a multi-strategy involving the introduction of Ni vacancies, the adjustment of the Se/S ratio, and the construction of dual junctions are employed to simultaneously realize NiSxSe2-x/phase junction CdS (HCC) an excellent photocatalytic activity and broad light absorption. With the help of VNi and the regulation of S/Se, the local electrons are redistributed to occupy more antibonding orbitals and adjust the p-band center, thus optimizing the H* adsorption energy of the catalyst to accelerate the photocatalytic reaction kinetics. Meanwhile, the synergistic effects of phase junction and heterojunction formations generate dual built-in electric fields (BIEF), which further amplify the stepwise separation and migration of photogenerated carriers. Notably, VNi-NiSSe/HCC achieves an optimal H2 evolution rate of 11.43 mmol·g-1·h-1 under visible light irradiation with the apparent quantum yield (AQY) at 15.3% at 420 nm, which is 53 times and 26.6 times higher than H-CdS and HCC, respectively. Additionally, it also exhibits a hydrogen evolution rate of 147 µmol·g-1·h-1 under near-infrared (NIR) light with λ ≥780 nm. This work provides new insight into designing robust photocatalysts by regulating the electronic states and energy states.

Multifunctional Strategies of Advanced Electrocatalysts for Efficient Urea Synthesis

The electrochemical reduction of nitrogenous species (such as N2, NO, NO2 -, and NO3 -) for urea synthesis under ambient conditions has been extensively studied due to their potential to realize carbon/nitrogen neutrality and mitigate environmental pollution, as well as provide a means to store renewable electricity generated from intermittent sources such as wind and solar power. However, the sluggish reaction kinetics and the scarcity of active sites on electrocatalysts have significantly hindered the advancement of their practical applications. Multifunctional engineering of electrocatalysts has been rationally designed and investigated to adjust their electronic structures, increase the density of active sites, and optimize the binding energies to enhance electrocatalytic performance. Here, surface engineering, defect engineering, doping engineering, and heterostructure engineering strategies for efficient nitrogen electro-reduction are comprehensively summarized. The role of each element in engineered electrocatalysts is elucidated at the atomic level, revealing the intrinsic active site, and understanding the relationship between atomic structure and catalytic performance. This review highlights the state-of-the-art progress of electrocatalytic reactions of waste nitrogenous species into urea. Moreover, this review outlines the challenges and opportunities for urea synthesis and aims to facilitate further research into the development of advanced electrocatalysts for a sustainable future.

Boosting Acidic Hydrogen Evolution Kinetics Induced by Weak Strain Effect in PdPt Alloy for Proton Exchange Membrane Water Electrolyzers

Strain engineering is an effective strategy for manipulating the electronic structure of active sites and altering the binding strength toward adsorbates during the hydrogen evolution reaction (HER). However, the effects of weak and strong strain engineering on the HER catalytic activity have not been fully explored. Herein, the core-shell PdPt alloys with two-layer Pt shells (PdPt2L) and multi-layer Pt shells (PdPtML) is constructed, which exhibit distinct lattice strains. Notably, PdPt2L with weak strain effect just requires a low overpotential of 18 mV to reach 10 mA cm-2 for the HER and shows the superior long-term stability for 510 h with negligible activity degradation in 0.5 M H2SO4. The intrinsic activity of PdPt2L is 6.2 and 24.5 times higher than that of PdPtML and commercial Pt/C, respectively. Furthermore, PdPt2L||IrO2 exhibits superior activity over Pt/C||IrO2 in proton exchange membrane water electrolyzers and maintains stable operation for 100 h at large current density of 500 mA cm-2. In situ/operando measurements verify that PdPt2L exhibits lower apparent activation energy and accelerated ad-/desorption kinetics, benefiting from the weak strain effect. Density functional theory calculations also reveal that PdPt2L displays weaker H* adsorption energy compared to PdPtML, favoring for H* desorption and promoting H2 generation.

Manipulating heterointerface to boost formation and desorption of intermediates for highly efficient alkaline hydrogen evolution

Promoting water dissociation and H intermediate desorption play a pivotal role in achieving highly efficient hydrogen evolution reaction (HER) in alkaline media but remain a great challenge. Herein, we rationally develop a unique W-doped NiSx/Ni heterointerface as a favorable HER electrocatalyst which was directly grown on the Cu nanowire foam substrate (W-NiSx/Ni@Cu) by the electrodeposition strategy. Benefiting from the rational design of the interfaces, the electronic coupling of the W-NiSx/Ni@Cu can be efficiently modulated to lower the HER kinetic barrier. The obtained W-NiSx/Ni@Cu exhibits an enhanced HER activity with a low overpotential of 38 mV at 10 mA cm-2 and a small Tafel value of 27.5 mV dec-1, and high stability during HER catalysis. In addition, in-situ Raman spectra reveal that the Ni2+ active sites preferentially adsorb OH intermediate. The theoretical calculation confirms that the water dissociation is accelerated by the construction of W-NiSx/Ni heterointerface and H intermediate desorption can be also promoted by H spillover from S active sites in W-NiSx to Ni active sites in metal Ni. This work offers a valuable reference for rational designing heterointerface of electrocatalysts and provides an available method to accelerate the HER kinetics for the ampere-level current density under low overpotential.

Dual-Intermetallic Heterostructure on Hierarchical Nanoporous Metal for Highly Efficient Alkaline Hydrogen Electrocatalysis

Constructing well-defined active multisites is an effective strategy to break linear scaling relationships to develop high-efficiency catalysts toward multiple-intermediate reactions. Here, dual-intermetallic heterostructure composed of tungsten-bridged Co3W and WNi4 intermetallic compounds seamlessly integrated on hierarchical nanoporous nickel skeleton is reported as a high-performance nonprecious electrocatalyst for alkaline hydrogen evolution and oxidation reactions. By virtue of interfacial tungsten atoms configuring contiguous multisites with proper adsorptions of hydrogen and hydroxyl intermediates to accelerate water dissociation/combination and column-nanostructured nickel skeleton facilitating electron and ion/molecule transportations, nanoporous nickel-supported Co3W-WNi4 heterostructure exhibits exceptional hydrogen electrocatalysis in alkaline media, with outstanding durability and impressive catalytic activities for hydrogen oxidation reaction (geometric exchange current density of ≈6.62 mA cm-2) and hydrogen evolution reaction (current density of ≈1.45 A cm-2 at overpotential of 200 mV). Such atom-ordered intermetallic heterostructure alternative to platinum group metals shows genuine potential for hydrogen production and utilization in hydroxide-exchange-membrane water electrolyzers and fuel cells.

Advancing electrocatalytic reactions through mapping key intermediates to active sites via descriptors

Descriptors play a crucial role in electrocatalysis as they can provide valuable insights into the electrochemical performance of energy conversion and storage processes. They allow for the understanding of different catalytic activities and enable the prediction of better catalysts without relying on the time-consuming trial-and-error approaches. Hence, this comprehensive review focuses on highlighting the significant advancements in commonly used descriptors for critical electrocatalytic reactions. First, the fundamental reaction processes and key intermediates involved in several electrocatalytic reactions are summarized. Subsequently, three types of descriptors are classified and introduced based on different reactions and catalysts. These include d-band center descriptors, readily accessible intrinsic property descriptors, and spin-related descriptors, all of which contribute to a profound understanding of catalytic behavior. Furthermore, multi-type descriptors that collectively determine the catalytic performance are also summarized. Finally, we discuss the future of descriptors, envisioning their potential to integrate multiple factors, broaden application scopes, and synergize with artificial intelligence for more efficient catalyst design and discovery.

Rapid Defect Engineering in FeCoNi/FeAl2O4 Hybrid for Enhanced Oxygen Evolution Catalysis: A Pathway to High-Performance Electrocatalysts

Rational modulation of surface reconstruction in the oxygen evolution reaction (OER) utilizing defect engineering to form efficient catalytic activity centers is a topical interest in the field of catalysis. The introduction of point defects has been demonstrated to be an effective strategy to regulate the electronic configuration of electrocatalysts, but the influence of more complex planar defects (e.g., twins and stacking faults), on their intrinsic activity is still not fully understood. This study harnesses ultrasonic cavitation for rapid and controlled introduction of different types of defects in the FeCoNi/FeAl2O4 hybrid coating, optimizing OER catalytic activity. Theoretical calculations and experiments demonstrate that the different defects optimize the coordination environment and facilitate the activation of surface reconstruction into true catalytic activity centers at lower potentials. Moreover, it demonstrates exceptional durability, maintaining stable oxygen production at a high current density of 300 mA cm-2 for over 120 hours. This work not only presents a novel pathway for designing advanced electrocatalysts but also deepens our understanding of defect-engineered catalytic mechanisms, showcasing the potential for rapid and efficient enhancement of electrocatalytic performance.

Work Function-Guided Electrocatalyst Design

The development of high-performance electrocatalysts for energy conversion reactions is crucial for advancing global energy sustainability. The design of catalysts based on their electronic properties (e.g., work function) has gained significant attention recently. Although numerous reviews on electrocatalysis have been provided, no such reports on work function-guided electrocatalyst design are available. Herein, a comprehensive summary of the latest advancements in work function-guided electrocatalyst design for diverse electrochemical energy applications is provided. This includes the development of work function-based catalytic activity descriptors, and the design of both monolithic and heterostructural catalysts. The measurement of work function is first discussed and the applications of work function-based catalytic activity descriptors for various reactions are fully analyzed. Subsequently, the work function-regulated material-electrolyte interfacial electron transfer (IET) is employed for monolithic catalyst design, and methods for regulating the work function and optimizing the catalytic performance of catalysts are discussed. In addition, key strategies for tuning the work function-governed material-material IET in heterostructural catalyst design are examined. Finally, perspectives on work function determination, work function-based activity descriptors, and catalyst design are put forward to guide future research. This work paves the way to the work function-guided rational design of efficient electrocatalysts for sustainable energy applications.

Strain Engineering for Electrocatalytic Overall Water Splitting

Strain engineering is a novel method that can achieve superior performance for different applications. The lattice strain can affect the performance of electrochemical catalysts by changing the binding energy between the surface-active sites and intermediates and can be affected by the thickness, surface defects and composition of the materials. In this review, we summarized the basic principle, characterization method, introduction strategy and application direction of lattice strain. The reactions on hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are focused. Finally, the present challenges are summarized, and suggestions for the future development of lattice strain in electrocatalytic overall water splitting are put forward.

Operando Spectroscopic Monitoring of Metal Chalcogenides for Overall Water Splitting: New Views of Active Species and Sites

Metal-based chalcogenides exhibit great promise for overall water splitting, yet their intrinsic catalytic reaction mechanisms remain to be fully understood. In this work, we employed operando X-ray absorption (XAS) and in situ Raman spectroscopy to elucidate the structure-activity relationships of low-crystalline cobalt sulfide (L-CoS) catalysts toward overall water splitting. The operando results for L-CoS catalyzing the alkaline hydrogen evolution reaction (HER) demonstrate that the cobalt centers in the bulk are predominantly coordinated by sulfur atoms, which undergo a kinetic structural rearrangement to generate metallic cobalt in S-Co-Co-S moieties as the true catalytically active species. In comparison, during the acidic HER, L-CoS undergoes local structural optimization of Co centers, and H2 production proceeds with adsorption/desorption of key intermediates atop the Co-S-Co configurations. Further operando characterizations highlight the crucial formation of high-valent Co4+ species in L-CoS for the alkaline oxygen evolution reaction (OER), and the formation of such active species was found to be far more facile than in crystalline Co3O4 and Co-LDH references. These insights offer a clear picture of the complexity of active species and site formation in different media, and demonstrate how their restructuring influences the catalytic activity.

In-situ construction of cation vacancies in amphoteric-metallic element-doped NiFe-LDH as ultrastable and efficient alkaline hydrogen evolution electrocatalysts at 1000 mA cm-2

Developing efficient and stable electrocatalysts at affordable costs is very important for large-scale production of green hydrogen. In this study, unique amphoteric metallic element-doped NiFe-LDH nanosheet arrays (NiFeCd-LDH, NiFeZn-LDH and NiFeAl-LDH) using as high-performance bifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) were reported, by tuning electronic structure and vacancy engineering. It was found that NiFeCd-LDH possesses the lowest overpotentials of 85 mV and 240 mV (at 10 mA cm-2) for HER and OER, respectively. Density functional theory (DFT) calculations reveal the synergistic effect of Cd vacancies and Cd doping on improving alkaline HER performance, which promote the achievement of excellent catalytic activity and ultrastable hydrogen production at a large current density of 1000 mA cm-2 within 250 h. Besides, the overall water splitting performance of the as-prepared NiFeCd-LDH requires only 1.580 V to achieve a current density of 10 mA cm-2 in alkaline seawater media, underscoring the importance of modifying the electronic properties of LDH for efficient overall water splitting in both alkaline water/seawater environments.

Ligand and Strain Synergistic Effect in NiFeP0.32 LDH for Triggering Efficient Oxygen Evolution Reaction

Developing efficient water-splitting electrocatalysts to accelerate the slow oxygen evolution reaction (OER) kinetics is urgently desired for hydrogen production. Herein, ultralow phosphorus (P)-doped NiFe LDH (NiFePx LDH) with mild compressive strain is synthesized as an efficient OER electrocatalyst. Remarkably, NiFePx LDH with the phosphorus mass ratio of 0.32 wt.% and compressive strain ratio of 2.53% (denoted as NiFeP0.32 LDH) exhibits extraordinary OER activity with an overpotential as low as 210 mV, which is superior to that of commercial IrO2 and other reported P-based OER electrocatalysts. Both experimental performance and density function theory (DFT) calculation demonstrate that the doping of P atoms can generate covalent Fe─P coordination bonds and lattice distortion, thus resulting in the consequent depletion of electrons around the Fe active center and the downward shift of the d-band center, which can lead to a weaker adsorption ability of *O intermediate to improve the catalytic performance of NiFeP0.32 LDH for OER. This work provides novel insights into the distinctive coordinated configuration of P in NiFePx LDH, which can result in superior catalytic performance for OER.

Tuning Electrocatalytic Activities of Dealloyed Nanoporous Catalysts by Macroscopic Strain Engineering

It is technically challenging to quantitatively apply strains to tune catalysis because most heterogeneous catalysts are nanoparticles, and lattice strains can only be applied indirectly via core-shell structures or crystal defects. Herein, we report quantitative relations between macroscopic strains and hydrogen evolution reaction (HER) activities of dealloyed nanoporous gold (NPG) by directly applying macroscopic strains upon bulk NPG. It was found that macroscopic compressive strains lead to a decrease, while macroscopic tensile strains improve the HER activity of NPG, which is in line with the d-band center model. The overpotential and onset potential of HER display approximately a linear relation with applied macroscopic strains, revealing an ∼2.9 meV decrease of the binding energy per 0.1% lattice strains from compressive to tensile. The methodology with the high strain sensitivity of electrocatalysis, developed in this study, paves a new way to investigate the insights of strain-dependent electrocatalysis with high precision.

Strongly-Interacted NiSe2/NiFe2O4 Architectures Built Through Selective Atomic Migration as Catalysts for the Oxygen Evolution Reaction

The interactions between the catalyst and support are widely used in many important catalytic reactions but the construction of strong interaction with definite microenvironments to understand the structure-activity relationship is still challenging. Here, strongly-interacted composites are prepared via selective exsolution of active NiSe2 from the host matrix of NiFe2O4 (S-NiSe2/NiFe2O4) taking advantage of the differences of migration energy, in which the NiSe2 possessed both high dispersion and small size. The characteristics of spatially resolved scanning transmission X-ray microscopy (STXM) coupled with analytical Mössbauer spectra for the surface and bulk electronic structures unveiled that this strongly interacted composite triggered more charge transfers from the NiSe2 to the host of NiFe2O4 while stabilizing the inherent atomic coordination of NiFe2O4. The obtained S-NiSe2/NiFe2O4 exhibits overpotentials of 290 mV at 10 mA cm-2 for oxygen evolution reaction (OER). This strategy is general and can be extended to other supported catalysts, providing a powerful tool for modulating the catalytic performance of strongly-interacted composites.

Evolution of Grain Boundaries Promoted Hydrogen Production for Industrial-Grade Current Density

The development of efficient and durable high-current-density hydrogen production electrocatalysts is crucial for the large-scale production of green hydrogen and the early realization of hydrogen economic blueprint. Herein, the evolution of grain boundaries through Cu-mediated NiMo bimetallic oxides (MCu-BNiMo), which leading to the high efficiency of electrocatalyst for hydrogen evolution process (HER) in industrial-grade current density, is successfully driven. The optimal MCu0.10-BNiMo demonstrates ultrahigh current density (>2 A cm-2) at a smaller overpotential in 1 m KOH (572 mV), than that of BNiMo, which does not have lattice strain. Experimental and theoretical calculations reveal that MCu0.10-BNiMo with optimal lattice strain generated more electrophilic Mo sites with partial oxidation owing to accelerated charge transfer from Cu to Mo, which lowers the energy barriers for H* adsorption. These synergistic effects lead to the enhanced HER performance of MCu0.10-BNiMo. More importantly, industrial application of MCu0.10-BNiMo operated in alkaline electrolytic cell is also determined, with its current density reached 0.5 A cm-2 at 2.12 V and 0.1 A cm-2 at 1.79 V, which is nearly five-fold that of the state-of-the-art HER electrocatalyst Pt/C. The strategy provides valuable insights for achieving industrial-scale hydrogen production through a highly efficient HER electrocatalyst.

Questing for High-Performance Electrocatalysts for Oxygen Evolution Reaction: Importance of Chemical Complexity, Active Phase, and Surface-Adsorbed Species

Rational design of advanced electrocatalysts for oxygen evolution reaction (OER) is of vital importance for the development of sustainable energy. Entropy engineering is emerging as a promising approach for the design of efficient OER electrocatalysts. However, other multi-anion/cation electrocatalysts with compositional complexity, particularly the medium-entropy and other non-equimolar cation/anion complex electrocatalysts, have not received noteworthy attention. In this perspective, we review and highlight the importance of compositionally complex catalysts and propose a concept of chemical complexity to correlate the OER catalytic activity with the contributions from the pairwise cation-anion interactions. Then, we offer a new view on the active catalytic sites being the hydroxylated reacting interface in an alkaline solution. Further, we argue that the common discrepancies between computationally predicted OER activities and experimental results stem from lack of considerations of surface-adsorbed species in modeling the active catalytic phases or sites. This perspective would facilitate achieving a renewed and profound understanding of the OER mechanism and promote efficient design of OER electrocatalysts for renewable energy conversion and storage.

Heterostructure CoS2/MoS2 Nanosheets as a Dual-Active Electrocatalyst for the Oxygen Evolution Reaction

Cost-effective and earth-abundant oxygen evolution reaction (OER) electrocatalysts are an incredible research hotspot in numerous energy storage and conversion technology fields. Herein, CoS2/MoS2 nanosheets supported by carbon cloth as a dual-active CC@CoS2/MoS2 heterostructure electrocatalyst is prepared through a simple solvothermal method. The catalyst demonstrates admirable OER performance in 1 M KOH solution with a low overpotential of 243 mV at a current density of 10 mA cm-2 and a minor Tafel slope of 109 mV dec-1, displaying honorable stability after 1000 cyclic voltammetry (CV) cycles and long-term robustness over 60 h. Theoretical calculations further ascertain that the rate-determining step of the electrocatalytic course of the CC@CoS2/MoS2 heterostructure is the conversion *O + OH- → *OOH + e- with a lower energy barrier of 1.49 eV due to the heterojunction established by CoS2 and MoS2, which can promote the OER performance of electrocatalysts. The actual identification of the catalytic mechanism in the heterostructure is conducive to the improvement of electrocatalysis applications in the OER.

2D Amorphous Iron Selenide Sulfide Nanosheets for Stable and Rapid Sodium-Ion Storage

Sodium ion batteries (SIBs) suffer from large electrode volume change and sluggish redox kinetics for the relatively large ionic radius of sodium ions, raising a significant challenge to improve their long-term cyclability and rate capacity. Here, it is proposed to apply 2D amorphous iron selenide sulfide nanosheets (a-FeSeS NSs) as an anode material for SIBs and demonstrate that they exhibit remarkable rate capability of 528.7 mAh g-1 at 1 A g-1 and long-life cycle (10 000 cycles) performance (300.4 mAh g-1 ). This performance is much more superior to that of the previously reported Fe-based anode materials, which is attributed to their amorphous structure that alleviates volume expansion of electrode, 2D nature that facilitates electrons/ions transfer, and the S/Se double anions that offer more reaction sites and stabilize the amorphous structure. Such a 2D amorphous strategy provides a fertile platform for structural engineering of other electrode materials, making a more secure energy prospect closer to a reality.

Lattice Strain Engineering of Ni2 P Enables Efficient Catalytic Hydrazine Oxidation-Assisted Hydrogen Production

Hydrazine-assisted water electrolysis provides new opportunities to enable energy-saving hydrogen production while solving the issue of hydrazine pollution. Here, the synthesis of compressively strained Ni2 P as a bifunctional electrocatalyst for boosting both the anodic hydrazine oxidation reaction (HzOR) and cathodic hydrogen evolution reaction (HER) is reported. Different from a multistep synthetic method that induces lattice strain by creating core-shell structures, a facile strategy is developed to tune the strain of Ni2 P via dual-cation co-doping. The obtained Ni2 P with a compressive strain of -3.62% exhibits significantly enhanced activity for both the HzOR and HER than counterparts with tensile strain and without strain. Consequently, the optimized Ni2 P delivers current densities of 10 and 100 mA cm-2 at small cell voltages of 0.16 and 0.39 V for hydrazine-assisted water electrolysis, respectively. Density functional theory (DFT) calculations reveal that the compressive strain promotes water dissociation and concurrently tunes the adsorption strength of hydrogen intermediates, thereby facilitating the HER process on Ni2 P. As for the HzOR, the compressive strain reduces the energy barrier of the potential-determining step for the dehydrogenation of *N2 H4 to *N2 H3 . Clearly, this work paves a facile pathway to the synthesis of lattice-strained electrocatalysts via the dual-cation co-doping.

Single-Atom Pt Embedded in Defective Layered Double Hydroxide for Efficient and Durable Hydrogen Evolution

Electrocatalysis in neutral conditions is appealing for hydrogen production by utilizing abundant wastewater or seawater resources. Single-atom catalysts (SACs) immobilized on supports are considered one of the most promising strategies for electrocatalysis research. While they have principally exhibited breakthrough activity and selectivity for the hydrogen evolution reaction (HER) electrocatalysis in alkaline or acidic conditions, few SACs were reported for HER in neutral media. Herein, we report a facile strategy to tailor the water dissociation active sites on the NiFe LDH by inducing Mo species and an ultralow single atomic Pt loading. The defected NiFeMo LDH (V-NiFeMo LDH) shows HER activity with an overpotential of 89 mV at 10 mA cm-2 in 1 M phosphate buffer solutions. The induced Mo species and the transformed NiO/Ni phases after etching significantly increase the electron conductivity and the catalytic active sites. A further enhancement can be achieved by modulating the ultralow single atom Pt anchored on the V-NiFeMo LDH by potentiostatic polarization. A potential as low as 37 mV is obtained at 10 mA cm-2 with a pronounced long-term durability over 110 h, surpassing its crystalline LDH materials and most of the HER catalysts in neutral medium. Experimental and density functional theory calculation results have demonstrated that the synergistic effects of Mo/SAs Pt and phase transformation into NiFe LDH reduce the kinetic energy barrier of the water dissociation process and promote the H* conversion for accelerating the neutral HER.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

Surface and near-surface engineering design of transition metal catalysts for promoting water splitting

Transition metal catalysts are widely used in the field of hydrogen production via water electrolysis. The surface state and near-surface environment of the catalysts greatly affect the efficiency of hydrogen production. Therefore, the rational design of surface engineering and near-surface engineering of transition metal catalysts can significantly improve the performance of water electrolysis. This review systematically introduces surface engineering strategies, including heteroatom doping, vacancy engineering, strain regulation, heterojunction effect, and surface reconstruction. These strategies optimize the surface electronic structure of the catalysts, expose more active sites, and promote the formation of highly active species, ultimately enhancing water electrolysis performance. Furthermore, near-surface engineering strategies, such as surface wettability, three-dimensional structure, high-curvature structure, external field assistance, and extra ion addition, are thoroughly discussed. These strategies expedite the mass transfer of reactants and gas products, improve the local chemical environment near the catalyst surface, and contribute toward achieving an industrial-level current density for overall water splitting. Finally, the key challenges faced by surface engineering and near-surface engineering of transition metal catalysts are highlighted and potential solutions are proposed. This review offers essential guidelines for the design and development of efficient transition metal catalysts for water electrolysis.

Liquid nitrogen quenching inducing lattice tensile strain to endow nitrogen/fluorine co-doping Fe3O4 nanocubes assembled on porous carbon with optimizing hydrogen evolution reaction

In this work, the lattice tensile strain of nitrogen/fluorine co-doping ferroferric oxide (Fe₃O₄) nanocubes assembled on chrysanthemum tea-derived porous carbon is induced through a novel liquid nitrogen quenching treatment (named as TS-NF-FO/PC_X-Y, TS: Tensile strain, NF: Nitrogen/Fluorine co-doping, FO: Fe₃O₄, PC: Porous carbon, X: The weight ratio of KOH/carbon, Y: The adding amount of porous carbon). Besides, the electrocatalytic activity influenced by the adding amount of porous carbon, the type of dopant, and the introduction of lattice tensile strain is systematically studied and explored. The interconnected porous carbon could improve electrical conductivity and prevent Fe₃O₄ nanocubes from aggregating. The induced nitrogen/fluorine could cause extrinsic defects and tailor the intrinsic electron state of the host materials. Lattice tensile strain could tailor the surface electronic structure of Fe₃O₄ via changing the dispersion of surface atoms and their bond lengths. Impressively, the designed TS-NF-FO/PC₅-0.25 delivers a low overpotential of 207.3 ± 0.4 mV at 10 mA/cm² and demonstrates desirable reaction dynamics. Density functional theory calculations illustrate that the electron structure and hydrogen adsorption free energy (ΔG_*H) are optimized by the synergistic effect among porous carbon, nitrogen/fluorine co-doping and lattice tensile strain, thus promoting hydrogen evolution reaction (HER) catalytic activity. Overall, this work paves the way to unravel the enhancement mechanism of HER on transition metal oxide-based materials by electronic structure and phase composition modulation strategy.

Dynamic Reconstructed RuO2 /NiFeOOH with Coherent Interface for Efficient Seawater Oxidation

Developing efficient oxygen evolution reaction (OER) electrocatalysts for seawater electrolysis is still a big challenge. Herein, a facile one-pot approach is reported to synthesize RuO₂ -incorporated NiFe-metal organic framework (RuO₂ /NiFe-MOF) with unique nanobrick-nanosheet heterostructure as precatalyst. Driven by electric field, the RuO₂ /NiFe-MOF dynamically reconstructs into RuO₂ nanoparticles-anchored NiFe oxy/hydroxide nanosheets (RuO₂ /NiFeOOH) with coherent interface, during which the dissolution and redeposition of RuO₂ are witnessed. Owing to the synergistic interaction between RuO₂ and NiFeOOH, the as-reconstructed RuO₂ /NiFeOOH exhibits outstanding alkaline OER activity with an ultralow overpotential of 187.6 mV at 10 mA cm^-2 and a small Tafel slope of 31.9 mV dec^-1 and excellent durability at high current densities of 840 and 1040 mA cm^-2 in 1 m potassium hydroxide (KOH). When evaluated for seawater oxidation, the RuO₂ /NiFeOOH only needs a low overpotential of 326.2 mV to achieve 500 mA cm^-2 and can continuously catalyze OER at 500 mA cm^-2 for 100 h with negligible activity degradation. Density function theory calculations reveal that the presence of strong interaction and enhanced charge transfer along the coherent interface between RuO₂ and NiFeOOH ensures improved OER activity and stability.

Construction of NiFe-Layered Double Hydroxides Arrays as Robust Electrocatalyst for Oxygen Evolution Reaction

Electrochemical water splitting is considered to be an important method for efficient hydrogen production to alleviate energy shortage and environmental pollution, but its development is currently limited by the slow oxygen evolution reaction (OER). To solve the sluggish reaction kinetics of OER, the focus is on the exploration of low-cost and efficient electrocatalysts, which is quite significant for the development of electrochemical water splitting. Herein, a NiFe layered double hydroxides (LDH) electrocatalyst (denoted as FNH) is achieved by a simple one-step hydrothermal method. The experimental results show that due to the synergistic interaction of introduced Fe species, the FNH possesses a special three-dimensional (3D) vertical nanosheet array structure, which results in efficient ion access. More importantly, the strong electronic interaction between Fe and Ni sites results in the optimized electronic structure of the Ni sites, which not only generates abundant Ni3+ sites as optimized active sites for OER, but also decrease the charge transfer resistance. Thus, the FNH catalyst exhibits an extraordinary overpotential of 386.8 mV to deliver 100 mA cm−2, showing better activity than that of RuO2, and satisfactory cycling stability after continuous operation for 28 h. Our work provides an easy-to-implement method to obtain high-efficiency OER electrocatalysts.

Effects of Alternating Magnetic Fields on the OER of Heterogeneous Core-Shell Structured NiFe2O4@(Ni, Fe)S/P

Composition optimization, structural design, and introduction of external magnetic fields into the catalytic process can remarkably improve the oxygen evolution reaction (OER) performance of a catalyst. NiFe₂O₄@(Ni, Fe)S/P materials with a heterogeneous core-shell structure were prepared by the sulfide/phosphorus method based on spinel-structured NiFe₂O₄ nanomicrospheres. After the sulfide/phosphorus treatment, not only the intrinsic activity of the material and the active surface area were increased but also the charge transfer resistance was reduced due to the internal electric field. The overpotential of NiFe₂O₄@(Ni, Fe)P at 10 mA cm^-2 (iR correction), Tafel slope, and charge transfer resistance were 261 mV, 42 mV dec^-1, and 3.163 Ω, respectively. With an alternating magnetic field, the overpotential of NiFe₂O₄@(Ni, Fe)P at 10 mA cm^-2 (without iR correction) declined by 45.5% from 323 mV (0 mT) to 176 mV (4.320 mT). Such enhancement of performance is primarily accounted for the enrichment of the reactive ion OH^- on the electrode surface induced by the inductive electric potential derived from the Faraday induction effect of the AMF. This condition increased the electrode potential and thus the charge transfer rate on the one hand and weakened the diffusion of the active substance from the electrolyte to the electrode surface on the other hand. The OER process was dominantly controlled by the charge transfer process under low current conditions. A fast charge transfer rate boosted the OER performance of the catalyst. At high currents, diffusion exerted a significant effect on the OER process and low OH^- diffusion rates would lead to a decrease in the OER performance of the catalyst.

Boosting Hydrogen Production via Selective Two-electron Mild Electrochemical Oxidation of Tetrahydroisoquinolines Completely to Dihydroisoquinolines

Different from the previous study that biomass derivatives replace water oxidation for enhancing hydrogen production, we found that mild oxidation was more conductive to cathodic hydrogen production. In this study, maximum Faradaic efficiency (>99 %) and lower energy consumption for hydrogen production was achieved by precisely controlling the two-electron mild electrochemical oxidation of tetrahydroisoquinolines (THIQs) to dihydroisoquinolines (DHIQs) in place of the four-electron deep oxidation to isoquinolines (IQs). Moreover, the high value-added DHIQs were prepared from THIQs with high selectivity (>99 %) at the low potential of 1.36 V. Operando electrochemical Raman and density functional theory proved that the high selectivity was attributed to the regulable active species of NiOOH induced by the interaction of Co and Fe for preferentially breaking C-H bond rather than N-H of THIQs. This novel method provides important insight into efficient biomass-assisted hydrogen production.

Construction of nickel sulfide phase-heterostructure for alkaline hydrogen evolution reaction

Constructing transitionmetalsulfides (TMSs) heterostructure is an effective strategy to optimize the catalytic performance for hydrogen evolution reaction (HER) in alkaline medium. Herein, the rhombohedral nickel sulfide/hexagonal nickel sulfide (r-NiS/h-NiS) catalysts with the NiS phase-heterostructure were successfully fabricated by a simple one pot method. The r-NiS/h-NiS (1.25) (1.25 means the theoretical mole ratio of S and Ni added to reaction) displayed the excellent HER performance with low overpotential (101 ± 1 mV@10 mA cm^-2) and small Tafel slope (62.10 ± 0.1 mV dec^-1), which were superior to the pure phase r-NiS and h-NiS. In this work, the improved HER catalytic performances were attributed to the dense coupling interfaces between the r-NiS and h-NiS. This work shows the feasibility of construction NiS phase-heterostructure and provides a novel strategy for the application of NiS for water splitting.

NiS gradient distribution on arrayed porous carbonized grapefruit peel for water splitting

Metal-based catalysts on biomass carbon substrates can combine their respective advantages of composition and structure to improve the catalytic performance. Herein, NiS supported on grapefruit peel derived array porous carbon (APC) was obtained via a carbonization process without emission of toxic gases. The natural S source from grapefruit peel reacted with nickel salt solution. The gradient distribution of NiS and S on the APC substrates can be altered by the concentration of impregnating salt solution. Theoretical calculations showed that the S gradient distribution on APC could tune the electronic structure and optimize the adsorption energies of the intermediates. NiS was firmly anchored on the porous carbon framework, resulting in enhanced high intrinsic activity, exposure of more active sites, and accelerated mass transfer. The active mass density was proposed to build a relationship between active metal content and electrolyte diffusion capacity for the evaluation of catalytic properties.

Amorphous Mo-doped NiS0.5 Se0.5 Nanosheets@Crystalline NiS0.5 Se0.5 Nanorods for High Current-density Electrocatalytic Water Splitting in Neutral Media

It is vitally important to develop highly active, robust and low-cost transition metal-based electrocatalysts for overall water splitting in neutral solution especially at large current density. In this work, amorphous Mo-doped NiS_0.5 Se_0.5 nanosheets@crystalline NiS_0.5 Se_0.5 nanorods (Am-Mo-NiS_0.5 Se_0.5 ) was synthesized using a facil one-step strategy. In phosphate buffer saline solution, the Am-Mo-NiS_0.5 Se_0.5 shows tiny overpotentials of 48 and 209 mV for hydrogen evolution reaction (HER), 238 and 514 mV for oxygen evolution reaction (OER) at 10 and 1000 mA cm^-2 , respectively. Moreover, Am-Mo-NiS_0.5 Se_0.5 delivers excellent stability for at least 300 h without obvious degradation. Theoretical calculations revealed that the Ni sites in the defect-rich amorphous structure of Am-Mo-NiS_0.5 Se_0.5 owns higher electron state density and strengthened the binding energy of H₂ O, which will optimize H adsorption/desorption energy barriers and reduce the adsorption energy of OER determining step.

Tube-Sponge-Inspired Hierarchical Electrocatalysts with Boosted Mass and Electron Transfer for Efficient Oxygen Evolution

Hindered gas bubble release and limited electron conducting process represent the major bottlenecks for large-scale electrochemical water splitting. Both the desorption of bubbles and continuous electron transport are achievable on the surfaces of biomimetic catalytic materials by designing multiscale structural hierarchy. Inspired by the tubular structures of the deep-sea sponges, an exceptionally active and binder-free porous nickel tube arrays (PNTA) decorated with NiFe-Zn2+ -pore nanosheets (NiFe-PZn ) are fabricated. The PNTA facilitate removal of bubbles and electron transfer in the oxygen evolution reaction by reproducing trunks of the sponges, and simultaneously, the NiFe-PZn increase the number of catalytic active sites by simulating the sponge epidermis. With improved external mass transfer and interior electron transfer, the hierarchical NiFe-PZn @PNTA electrode exhibits superior oxygen evolution reaction performance with an overpotential of 172 mV at 10 mA cm-2 (with a Tafel slope of 50 mV dec-1 ). Furthermore, this electrocatalytic system recorded excellent reaction stability over 360 h with a constant current density of 100 mA cm-2 at the potential of 1.52 V (versus RHE). This work provides a new strategy of designing hierarchical electrocatalysts for highly efficient water splitting.

α-MnO2/FeCo-LDH on Nickel Foam as an Efficient Electrocatalyst for Water Oxidation

The ever-expanding human societies on the one hand and the diminishing fossil fuel resources on the other have driven man to find a suitable, cheap, clean, and accessible source of energy. Water splitting is a good solution to this crisis. Because of the slow kinetics of water oxidation reaction, it is important to select efficient and durable electrocatalysts to improve the reaction kinetics. In this research, α-MnO₂/FeCo-LDH catalysts on nickel foam were developed for water oxidation, which exhibited good catalytic performance and stability in a 0.1 M KOH solution. The electrocatalysts were synthesized by hydrothermal methods and characterized by XRD, FTIR, Raman, SEM, TEM, EDS, and MAP techniques. The proposed modified electrode has large exchange current, low overpotential, and small Tafel slope. Here, only an overpotential of 210 mV is required to achieve a current density of 5 mA cm² with a Tafel slope of 70.4 mV dec^-1 in an alkaline solution.

Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review

An unsustainable reliance on fossil fuels is the primary cause of the vast majority of greenhouse gas emissions, which in turn lead to climate change. Green hydrogen (H₂), which may be generated by electrolyzing water with renewable power sources, is a possible substitute for fossil fuels. On the other hand, the increasing intricacy of hydrogen evolution electrocatalysts that are presently being explored makes it more challenging to integrate catalytic theories, catalytic fabrication procedures, and characterization techniques. This review will initially present the thermodynamics, kinetics, and associated electrical and structural characteristics for HER electrocatalysts before highlighting design approaches for the electrocatalysts. Secondly, an in-depth discussion regarding the rational design, synthesis, mechanistic insight, and performance improvement of electrocatalysts is centered on both the intrinsic and extrinsic influences. Thirdly, the most recent technological advances in electrocatalytic water-splitting approaches are described. Finally, the difficulties and possibilities associated with generating extremely effective HER electrocatalysts for water-splitting applications are discussed.

Mastering the D-Band Center of Iron-Series Metal-Based Electrocatalysts for Enhanced Electrocatalytic Water Splitting

The development of non-noble metal-based electrocatalysts with high performance for hydrogen evolution reaction and oxygen evolution reaction is highly desirable in advancing electrocatalytic water-splitting technology but proves to be challenging. One promising way to improve the catalytic activity is to tailor the d-band center. This approach can facilitate the adsorption of intermediates and promote the formation of active species on surfaces. This review summarizes the role and development of the d-band center of materials based on iron-series metals used in electrocatalytic water splitting. It mainly focuses on the influence of the change in the d-band centers of different composites of iron-based materials on the performance of electrocatalysis. First, the iron-series compounds that are commonly used in electrocatalytic water splitting are summarized. Then, the main factors affecting the electrocatalytic performances of these materials are described. Furthermore, the relationships among the above factors and the d-band centers of materials based on iron-series metals and the d-band center theory are introduced. Finally, conclusions and perspectives on remaining challenges and future directions are given. Such information can be helpful for adjusting the active centers of catalysts and improving electrochemical efficiencies in future works.

Orbital Occupancy and Spin Polarization: From Mechanistic Study to Rational Design of Transition Metal-Based Electrocatalysts toward Energy Applications

Over the past few decades, development of electrocatalysts for energy applications has extensively transitioned from trial-and-error methodologies to more rational and directed designs at the atomic levels via either nanogeometric optimization or modulating electronic properties of active sites. Regarding the modulation of electronic properties, nonprecious transition metal-based materials have been attracting large interest due to the capability of versatile tuning d-electron configurations expressed through the flexible orbital occupancy and various possible degrees of spin polarization. Herein, recent advances in tailoring electronic properties of the transition-metal atoms for intrinsically enhanced electrocatalytic performances are reviewed. We start with discussions on how orbital occupancy and spin polarization can govern the essential atomic level processes, including the transport of electron charge and spin in bulk, reactive species adsorption on the catalytic surface, and the electron transfer between catalytic centers and adsorbed species as well as reaction mechanisms. Subsequently, different techniques currently adopted in tuning electronic structures are discussed with particular emphasis on theoretical rationale and recent practical achievements. We also highlight the promises of the recently established computational design approaches in developing electrocatalysts for energy applications. Lastly, the discussion is concluded with perspectives on current challenges and future opportunities. We hope this review will present the beauty of the structure-activity relationships in catalysis sciences and contribute to advance the rational development of electrocatalysts for energy conversion applications.

Carbonate-Hydroxide Induced Metal-Organic Framework Transformation Strategy for Honeycomb-Like NiCoP Nanoplates to Drive Enhanced pH-Universal Hydrogen Evolution

Developing a low-cost, pH-universal electrocatalyst is desirable for electrochemical water splitting but remains a challenge. NiCoP is a promising non-noble hydrogen-evolving electrocatalyst due to its high intrinsic electrical conductivity, fast mass transfer effects, and tunable electronic structure. Nevertheless, its hydrogen evolution reaction (HER) activity in full pH-range has been rarely developed. Herein, a Ni-Co carbonate-hydroxide induced metal-organic framework transformation strategy is proposed to in situ grow porous, honeycomb-like NiCoP nanoplates on Ni foam for high-performance, pH-universal hydrogen evolution reaction. The resultant NiCoP catalyst exhibits a highly 2D nanoporous network in which 20-50 nm, well-crystalline nanoparticles are interconnected with each other closely, and delivers versatile HER electroactivity with η₁₀ of 98, 105, and 97 mV in 1 m KOH, 0.5 m H₂ SO₄ , and 1 m phosphate buffer solution electrolytes, respectively. This overpotential remarkably surpasses the one of commercial Pt/Cs in both neutral and alkaline media at a large current density (>100 mA cm^-2 ). The corresponding full water-splitting electrolyzer constructed from the 2D porous NiCoP cathode requires only a cell voltage of 1.43 V at 10 mA cm^-2 , superior to most recently reported electrocatalysts. This work may open up a new avenue on the rational design of nonprecious, pH-universal electrocatalyst.

Synergy of heterojunction and interfacial strain for boosting photocatalytic H2 evolution of black phosphorus nanosheets

As an emerging post-graphene two-dimensional material, black phosphorus (BP) has attracted enormous interest as a promising cocatalyst for photocatalytic hydrogen (H₂) evolution, however, the activity of either pristine bulk or BP nanosheets is far from satisfactory. Herein, we present an effective strategy to greatly boost the H₂ evolution performance of BP via applying the synergistic effect of heterojunction and interfacial lattice strain. A multilayered heterostructure coupling BP nanosheets and nickel oxide (NiO) nanosheets with abundant interface P-Ni and PO bonds is synthesized and utilized as a proof-of-concept material for our design. Both the experimental and theoretical results have revealed that the strain is formed in BP-NiO multilayered heterostructure. The generated lattice strain induces the charge redistribution at the interface between BP and NiO, which leads to the improved electron transfer efficiency and favorable H* adsorption kinetics for photocatalytic H₂ evolution reaction. As a result, the BP-NiO heterostructure with strain effect exhibits much enhanced photocatalytic H₂ evolution activity in the presence of Eosin Y (EY) as photosensitizer, exceeding that of zero-strained BP/NiO heterostructure and many other reported noble-metal-free cocatalyst.

Superionic conductor Ag2Se modulated CoSe2 nanosheets prepared via monometallic cation release for efficient pH-universal water electrolysis into hydrogen

Superionic conductors regulated transition metal chalcogenides are the newly emerged electrocatalyst in water electrolysis into clean hydrogen and oxygen. However, there is still much room for the development of structural design, electronic modulation and heterogeneous interface construction to improve the overall water splitting performance in pH-universal solutions, especially in alkaline and neutral mediums. Herein, using β-cyclodextrin (β-CD) and citric acid (CA) organics with abundant hydroxyl (-OH) and carboxyl (-COOH), a special Ag₂Se nanoparticles-decorated CoSe₂ flower-like nanosheets loaded on porous and conductive nickel foam substrate (Ag₂Se-CoSe₂/NF) was successfully constructed by a new method of monometallic cation release of coordinated cobalt. The Ag₂Se phase exerts the nature characteristics of superionic conductors to modulate the morphological and electronic structures of CoSe₂ as well as improve its conductivity. The generated rich active interfaces and abundant Se vacancy defects facilitate numerous active sites exposure to accelerate the hydrogen ion transport and charge transfer. Compared to the single-phase Ag₂Se/NF-8 and CoSe₂/NF, the prepared Ag₂Se-CoSe₂/NF-8 with a two-phase synergistic effect achieves an outstanding pH-universal electrocatalytic hydrogen production performance by water electrolysis, as evidenced by a lower overpotential (60 mV, 212 mV and 85 mV vs RHE at 10 mA cm^-2 for pH = 0.36, 7.00 and 13.70, respectively). Only a voltage of 1.55 V at 10 mA cm^-2 is required to implement the overall water splitting in an alkaline electrolyzer. This work provides significant guidance for the future designation and practical development of transition metal chalcogenides with superionic conductors applied in the electrocatalytic field.