Conductivity Mechanism in Ionic 2D Carbon Nitrides: From Hydrated Ion Motion to Enhanced Photocatalysis

Metal Poly(heptazine imides) as Multifunctional Photocatalysts for Solar Fuel Production

Solar-driven photocatalysis employing particulate semiconductors represents a promising approach for sustainable production of valuable chemical feedstock. Metal poly(heptazine imide) (MPHI), a novel 2D ionic carbon nitride, has been recognized as an emerging photocatalyst with distinctive properties. In this minireview, we first delineate the forefront innovations of MPHI photocatalysts, spanning from synthetic strategies and solving structures to the exploration of novel properties. We place special emphasis on the structural design principles aimed at developing high-performance MPHI systems toward photocatalytic solar fuel production such as H2 evolution, H2O oxidation, H2O2 production and CO2 reduction. Finally, we discuss crucial insights and challenges in leveraging highly active MPHIs for efficient solar-to-chemical energy conversion.

Twinned crystal Cd0.9Zn0.1S/MoO3 nanorod S-scheme heterojunctions as promising photocatalysts for efficient hydrogen evolution

Leveraging solar energy through photocatalytic hydrogen production from water stands out as one of the most promising approaches to address the energy and environmental challenges. The choice of catalyst profoundly influences the outcomes of photocatalytic reactions, and constructing heterojunctions has emerged as a widely applied strategy to overcome the limitations associated with single-phase photocatalysts. MoO3, renowned for its high chemical stability, encounters issues such as low photocatalytic efficiency and fast recombination of photogenerated electrons and holes. To tackle these challenges, the morphology of MoO3 has been controlled to form nanorods, simultaneously suppressing the aggregation of the catalyst and increasing the number of surface-active sites. Moreover, to facilitate the separation of photogenerated charge carriers, Cd0.9Zn0.1S nanoparticles with a twin crystal structure are deposited on the surface of MoO3, establishing an S-scheme heterojunction. Experimental findings demonstrate that the synergistic effects arising from the well-defined morphology and interface interactions extend the absorption range to visible light response, improve charge transfer activity, and prolong the lifetime of charge carriers. Consequently, Cd0.9Zn0.1S/MoO3 S-scheme heterojunctions exhibit outstanding photocatalytic hydrogen production performance (3909.79 μmol g-1 h-1) under visible light irradiation, surpassing that of MoO3 by nearly nine fold.

Low-Temperature Synthesis of Cyano-Rich Modified Surface-Alkalinized Heterojunctions with Directional Charge Transfer for Photocatalytic In Situ Generation and Consumption of Peroxides

The synthesis of low-temperature poly(heptazine imide) (PHI) presents a significant challenge. In this context, we have developed a novel low-temperature synthesis strategy for PHI in this work. This strategy involves the introduction of Na+ ions, which etch and disrupt the conjugated structure of carbon nitride (CN) during assisted thermal condensation. This disruption leads to the partial decomposition of the heptazine ring structure, resulting in the formation of C≡N functionalities on the CN surface, which are enriched with hydroxyl groups and undergo cyano modification. The formation of heterojunctions between CN and ZnO, which facilitate charge transfer along an immobilization pathway, accelerated charge transfer processes and improved reactant adsorption as well as electron utilization efficiency. The resulting catalyst was employed for the room temperature, atmospheric pressure, and solvent-free photocatalytic selective oxidation of cumene (CM), achieving a cumene conversion rate of 28.7% and a remarkable selectivity of 92.0% toward the desired product, cumene hydroperoxide (CHP). Furthermore, this CHP induced oxidative reactions, as demonstrated by the successful oxidation of benzylamine to imine and the oxidation of sulfide to sulfoxide, both yielding high product yields. Additionally, the utilization of a continuous-flow device significantly reduces the reaction time required for these oxidation processes. This work not only introduces an innovative approach to environmentally friendly, sustainable, clean, and efficient PHI synthesis but also underscores the promising potential and advantages of carbon nitride-based photocatalysts in the realm of sustainable and green organic transformations.

Cyano-Rich g-C3 N4 in Photochemistry: Design, Applications, and Prospects

Cyano-rich g-C3 N4 materials are widely used in various fields of photochemistry due to the very powerful electron-absorbing ability and electron storage function of cyano, as well as its advantages in improving light absorption, adjusting the energy band structure, increasing the polarization rate and electron density in the structure, active site concentration, and promoting oxygen activation ability. Notwithstanding, there is yet a huge knowledge break in the design, preparation, detection, application, and prospect of cyano-rich g-C3 N4 . Accordingly, an overall review is arranged to substantially comprehend the research progress and position of cyano-rich g-C3 N4 materials. An overall overview of the current research position in the synthesis, characterization (determination of their location and quantity), application, and reaction mechanism analysis of cyano-rich g-C3 N4 materials to provide a quantity of novel suggestions for cyano-modified carbon nitride materials' construction is provided. In view of the prevailing challenges and outlooks of cyano-rich g-C3 N4 materials, this paper will purify the growth direction of cyano-rich g-C3 N4 , to achieve a more in-depth exploration and broaden the applications of cyano-rich g-C3 N4 .

Modular Gating of Ion Transport by Postsynthetic Charge Transfer Complexation in a Metal-Organic Framework

Nature's design of biological ion channels that demonstrates efficient gating and selectivity brings to light a very promising model to mimic and design for achieving selective and tunable ion transport. Functionalized nanopores that permit modulation of the pore wall charges are a compelling approach to gain control over the ion transport mechanism through the pores. This makes way for employing a noncovalent supramolecular approach for attaining charge reversal of the MOF pore walls using donor-acceptor pairs that can demonstrate strong charge transfer interactions. Herein, robust Zr4+-based mesoporous MOF-808 was postsynthetically modified into an anion-selective nanochannel (MOF-808-MV) by modification with dicationic viologen-based motifs. Charge modulation and even reversal of the MOF-808-MV pore walls were then explored taking advantage of strong charge transfer interactions between the grafted dicationic viologen acceptor moieties and anionic, π-electron-rich donor guest molecules such as pyranine (PYR) and tetrathiafulvalene tetrabenzoic acid (TTF-TA). Tunability of the MOF pore charge from positive to neutral to negative was achieved via simple methodologies such as diffusion control in case of guest molecule like PYR and by pH modulation for pH-responsive guest like TTF-TA. This results in a concomitant modulation in the selectivity of the nanochannel, rendering it from anion-selective to ambipolar to cation-selective. Furthermore, as a real-time application of this ion channel, Na+ ion conductivity (σ = 3.5 × 10-5 S cm-1) was studied at ambient temperature.

Extent of carbon nitride photocharging controls energetics of hydrogen transfer in photochemical cascade processes

Graphitic carbon nitride is widely studied in organic photoredox catalysis. Reductive quenching of carbon nitride excited state is postulated in many photocatalytic transformations. However, the reactivity of this species in the turn over step is less explored. In this work, we investigate electron and proton transfer from carbon nitride that is photocharged to a various extent, while the negative charge is compensated either by protons or ammonium cations. Strong stabilization of electrons by ammonium cations makes proton-coupled electron transfer uphill, and affords air-stable persistent carbon nitride radicals. In carbon nitrides, which are photocharged to a smaller extent, protons do not stabilize electrons, which results in spontaneous charge transfer to oxidants. Facile proton-coupled electron transfer is a key step in the photocatalytic oxidative-reductive cascade - tetramerization of benzylic amines. The feasibility of proton-coupled electron transfer is modulated by adjusting the extent of carbon nitride photocharging, type of counterion and temperature.

Stability and Crystallinity of Sodium Poly(Heptazine Imide) in Photocatalysis

Poly(heptazine imide) (PHI) salts, as crystalline carbon nitrides, exhibit high photocatalytic activity and are being extensively researched, but its photochemical instability has not drawn researchers' attention yet. Herein, sodium PHI (PHI-Na) ultrathin nanosheets with increased crystallinity, synthesized by enhancing contact of melamine with NaCl functioning as a structure-induction agent and hard template, exhibits improved photocatalytic hydrogen evolution activity, but low photochemical stability, owing to Na+ loss in the photocatalytic process, which, interestingly, can be enhanced by the common ion effect, e.g., addition of NaCl that is also able to remarkably increase the photoactivity with the apparent quantum yield at 420 nm reaching 41.5 %. This work aims at attracting research peers' attention to photochemical instability of PHI salts and provides a way to enhance their crystallinity.

Spatial Position Regulation of Cu Single Atom Site Realizes Efficient Nanozyme Photocatalytic Bactericidal Activity

Recently, single-atom nanozymes have made significant progress in the fields of sterilization and treatment, but their catalytic performance as substitutes for natural enzymes and drugs is far from satisfactory. Here, a method is reported to improve enzyme activity by adjusting the spatial position of a single-atom site on the nanoplatforms. Two types of Cu single-atom site nanozymes are synthesized in the interlayer (CuL /PHI) and in-plane (CuP /PHI) of poly (heptazine imide) (PHI) through different synthesis pathways. Experimental and theoretical analysis indicates that the interlayer position of PHI can effectively adjust the coordination number, coordination bond length, and electronic structure of Cu single atoms compared to the in-plane position, thereby promoting photoinduced electron migration and O2 activation, enabling effective generate reactive oxygen species (ROS). Under visible light irradiation, the photocatalytic bactericidal activity of CuL /PHI against aureus is ≈100%, achieving the same antibacterial effect as antibiotics, after 10 min of low-dose light exposure and 2 h of incubation.

Bottom-up Synthesis of Single-Crystalline Poly (Triazine Imide) Nanosheets for Photocatalytic Overall Water Splitting

Poly (triazine imide) (PTI/Li+ Cl- ), one of the crystalline versions of polymeric carbon nitrides, holds great promise for photocatalytic overall water splitting. In principle, the photocatalytic activity of PTI/Li+ Cl- is closely related to the morphology, which could be reasonably tailored by the modulation of the polycondensation process. Herein, we demonstrate that the hexagonal prisms of PTI/Li+ Cl- could be converted to hexagonal nanosheets by adjusting the binary eutectic salts from LiCl/KCl or NaCl/LiCl to ternary LiCl/KCl/NaCl. Results reveal that the extension of in-plane conjugation is preferred, when the polymerisation was performed in the presence of ternary eutectic salts. The hexagonal nanosheets bears longer lifetimes of charge carriers than that of hexagonal prisms due to lower intensity of structure defects and shorter hopping distance of charge carriers along the stacking direction of triazine nanosheets. The optimized hexagonal nanosheets exhibits a record apparent quantum yield value of 25 % (λ=365 nm) for solar hydrogen production by one-step excitation overall water splitting.

An integrated solar battery based on a charge storing 2D carbon nitride

Solar batteries capable of harvesting sunlight and storing solar energy present an attractive vista to transition our energy infrastructure into a sustainable future. Here we present an integrated, fully earth-abundant solar battery based on a bifunctional (light absorbing and charge storing) carbon nitride (K-PHI) photoanode, combined with organic hole transfer and storage materials. An internal ladder-type hole transfer cascade via a transport layer is used to selectively shuttle the photogenerated holes to the PEDOT:PSS cathode. This concept differs from previous designs such as light-assisted battery schemes or photocapacitors and allows charging with light during both electrical charge and discharge, thus substantially increasing the energy output of the cell. Compared to battery operation in the dark, light-assisted (dis)charging increases charge output by 243%, thereby increasing the electric coulombic efficiency from 68.3% in the dark to 231%, leading to energy improvements of 94.1% under illumination. This concept opens new vistas towards compact, highly integrated devices based on multifunctional, carbon-based electrodes and separators, and paves the way to a new generation of earth-abundant solar batteries.

Carbon-Hybridized Hydroxides for Energy Conversion and Storage: Interface Chemistry and Manufacturing

Carbon-hybridized hydroxides (CHHs) have been intensively investigated for uses in the energy conversion/storage fields. Nevertheless, the intrinsic structure-activity relationships between carbon and hydroxides within CHHs are still blurry, which hinders the fine modulation of CHHs in terms of practical applications to some degree. This review aims to figure out the intrinsic role of carbon materials in CHHs with a focus on the interface chemistry and the engineering strategy in-between two components. The fundamental effects of the carbon materials in enhancing the charge/mass transfer kinetics are first analyzed, particularly the extra electron pathways for fast charge transfer and the anchoring sites for boosting the mass transfer. Subsequently, the surface-guided/confined effects of carbon materials in CHHs to modify the morphology and tailor the hydroxides, and functional heterojunction for regulating the inner electronic structure are decoupled. The methods to efficiently construct a stable yet robust solid-solid heterointerface are summarized, including oxygen functional groups engrafting, topological defective sites construction and heteroatom incorporation to activate the inert carbon surface. The smart CHHs in some typical energy applications are demonstrated. Additionally, the methodologies that can reveal the hybridization electron configuration between two components are summed up. At last, the perspective and challenges faced by the CHHs for energy-related applications are outlined.

Designing Covalent Organic Framework-Based Light-Driven Microswimmers toward Therapeutic Applications

While micromachines with tailored functionalities enable therapeutic applications in biological environments, their controlled motion and targeted drug delivery in biological media require sophisticated designs for practical applications. Covalent organic frameworks (COFs), a new generation of crystalline and nanoporous polymers, offer new perspectives for light-driven microswimmers in heterogeneous biological environments including intraocular fluids, thus setting the stage for biomedical applications such as retinal drug delivery. Two different types of COFs, uniformly spherical TABP-PDA-COF sub-micrometer particles and texturally nanoporous, micrometer-sized TpAzo-COF particles are described and compared as light-driven microrobots. They can be used as highly efficient visible-light-driven drug carriers in aqueous ionic and cellular media. Their absorption ranging down to red light enables phototaxis even in deeper and viscous biological media, while the organic nature of COFs ensures their biocompatibility. Their inherently porous structures with ≈2.6  and ≈3.4 nm pores, and large surface areas allow for targeted and efficient drug loading even for insoluble drugs, which can be released on demand. Additionally, indocyanine green (ICG) dye loading in the pores enables photoacoustic imaging, optical coherence tomography, and hyperthermia in operando conditions. This real-time visualization of the drug-loaded COF microswimmers enables unique insights into the action of photoactive porous drug carriers for therapeutic applications.

Potassium Poly(heptazine imide) Coupled with Ti3C2 MXene-Derived TiO2 as a Composite Photocatalyst for Efficient Pollutant Degradation

The photocatalytic degradation of pollutants is an effective and sustainable way to solve environmental problems, and the key is to develop an efficient, low-cost, and stable photocatalyst. Polymeric potassium poly(heptazine imide) (K-PHI), as a new member of the carbon nitride family, is a promising candidate but is characterized by a high charge recombination rate. To solve this problem, K-PHI was in-situ composited with MXene Ti₃C₂-derived TiO₂ to construct a type-II heterojunction. The morphology and structure of composite K-PHI/TiO₂ photocatalysts were characterized via different technologies, including TEM, XRD, FT-IR, XPS, and UV-vis reflectance spectra. Robust heterostructures and tight interactions between the two components of the composite were verified. Furthermore, the K-PHI/TiO₂ photocatalyst showed excellent activity for Rhodamine 6G removal under visible light illumination. When the weight percent of K-PHI in the original mixture of K-PHI and Ti₃C₂ was set to 10%, the prepared K-PHI/TiO₂ composite photocatalyst shows the highest photocatalytic degradation efficiency as high as 96.3%. The electron paramagnetic resonance characterization indicated that the^·OH radical is the active species accounting for the degradation of Rhodamine 6G.

Na-doped g-C3N4/NiO 2D/2D laminated p-n heterojunction nanosheets toward optimized photocatalytic performance

Na-doped g-C₃N₄/NiO 2D/2D laminated p-n heterojunction nanosheets are fabricated by facile calcination and hydrothermal methods. The average thickness of g-C₃N₄ nanosheets is ∼1.388 nm, and the ultrathin structure allows for a high specific surface area and enough surface active sites, increasing the surface reactivity. The flower ball like structure of NiO increases the light utilization rate. Na doping accelerates charge separation and transport by increasing the electrical conductivity. The g-C₃N₄ and NiO nanosheets form 2D/2D laminated structures, and the spherical structure can suppress the agglomeration of 2D nanosheets, which could realize adequate interface contact and form efficient p-n heterojunctions. The p-n heterostructure builds an internal electric field to accelerate spatial charge separation. Under visible light irradiation, the photocatalytic degradation efficiency for ciprofloxacin and the hydrogen production rate of Na-doped g-C₃N₄/NiO are up to 99.0%, and 2299.32 μmol h^-1 g^-1, respectively, which are several times higher than those of the pristine one. The fabrication strategy for 2D/2D laminated heterojunctions may provide new insights for the preparation of novel laminated photocatalysts with high performance.

Atomically dispersed Mn boosting photoelectrochemical SARS-CoV-2 spike protein immunosensing on carbon nitride

The sudden outbreak of coronavirus disease (COVID-19) triggered by SARS-CoV-2 infection has created a terrifying situation around the world. The spike protein of SARS-CoV-2 can act as an early biomarker for COVID-19. Therefore, controlling the spread of COVID-19 requires a low-cost, fast-response, and sensitive monitoring technique of spike protein. Herein, a photoelectrochemical (PEC) immunosensor for the detection of spike protein was constructed using the nanobody and an Mn (Ⅱ) modified graphitic carbon nitride (Mn/g-C₃N₄). The introduction of atomically dispersed Mn (Ⅱ) can accelerate the effective transfer and separation of photogenerated electron-hole pairs, which significantly boosts PEC performance of g-C₃N₄, thereby improving the detection sensitivity. As a recognition site, nanobody can achieve high-affinity binding to the spike protein, leading to a high sensitivity. The linear detection range of the proposed PEC immunosensor was 75 fg mL^-1 to 150 pg mL^-1, and the limit of detection was calculated to be 1.22 fg mL^-1. This stable and feasible PEC immunosensor would be a promising diagnostic tool for sensitively detecting spike protein of SARS-CoV-2.

Photoelectron Storages in Functionalized Carbon Nitrides for Colorimetric Sensing of Oxygen

Colorimetric sensors have been widely used for centuries across diverse fields, thanks to their easy operation and uncompromisingly high sensitivity with no need for electricity. However, it is still a great challenge for conventional chromogenic systems to perform multiple measurements meanwhile maintaining high robustness. Here, we reported that carbon nitrides (CNs), the raw materials that are abundant, structure-tunable, and stable semiconductors with photoelectron storage capability, can be developed as a chromogenic system for colorimetric sensors. Beyond conventional metal oxides that only demonstrated a single blue-color switch after photoelectron storage, CN exhibited a multicolor switch under identical conditions owing to the unusual multiple photoelectron storage pathways. Mechanism studies revealed cyano and carbonyl groups in CN crucially elongated the centroid distance of electrons/holes, which exclusively stabilized the specific excited states that have different light absorption; meanwhile, the counter cations strengthened these processes. As a result, O₂, a proof-of-concept analyte, was quantitatively detected by the CN-derived colorimetric sensor, showing high reversibility in hundreds of cycles and adaptable sensitivity/detection range, outperforming most reported and commercial oxygen sensors. These intriguing features of CN are highly envisioned for the next generation of colorimetric sensors, especially in developing countries or fieldworks, to improve the detection reliability and lower the sensing cost.

Photomemristive sensing via charge storage in 2D carbon nitrides

Photomemristive sensors have the potential to innovate current photo-electrochemical sensors by incorporating new sensing capabilities including non-invasive, wireless and time-delayed (memory) readout. Here we report the charge storing 2D carbon nitride potassium poly(heptazine imide), K-PHI, as a direct photomemristive sensing platform by capitalizing on K-PHI's visible light bandgap, large oxidation potential, and intrinsic optoionic charge storage properties. Utilizing the light-induced charge storage function of K-PHI nanosheets, we demonstrate memory sensing via charge accumulation and present potentiometric, impedimetric and coulometric readouts to write/erase this information from the material, with no additional reagents required. Additionally, wireless colorimetric and fluorometric detection of the charging state of K-PHI nanoparticles is demonstrated, enabling the material's use as particle-based autonomous sensing probe in situ. The various readout options of K-PHI's response enable us to adapt the sensitivities and dynamic ranges without modifying the sensing platform, which is demonstrated using glucose as a model analyte over a wide range of concentrations (50 μM to 50 mM). Since K-PHI is earth abundant, biocompatible, chemically robust and responsive to visible light, we anticipate that the photomemristive sensing platform presented herein opens up memristive and neuromorphic functions.

Carbon nitride based Schottky junction with a Ni–Mo synergistic interaction for highly efficient photocatalytic hydrogen production

A CN/3NiMoP2 Schottky junction with a Ni–Mo synergistic interaction demonstrates a comparable photocatalytic HER performance to CN/3 wt% Pt and satisfactory stability.

Cyanamide defects induced built-in electric field in crystalline carbon nitride for enhanced visible to near infrared light photocatalytic activity

Carbon nitride materials have achieved high accomplishments in solar to hydrogen energy conversion under visible light. However, the weak kinetics and rapid recombination of photogenerated charge carriers result in a...