Structural Design of 3D Current Collectors for Lithium Metal Anodes: A Review

Due to the ultrahigh theoretical specific capacity (3860 mAh g-1) and low redox potential (-3.04 V vs. standard hydrogen electrode), Lithium (Li) metal anode (LMA) received increasing attentions. However, notorious dendrite and volume expansion during the cycling process seriously hinder the development of high energy density Li metal batteries. Constructing three-dimensional (3D) current collectors for Li can fundamentally solve the intrinsic drawback of hostless for Li. Therefore, this review systematically introduces the design and synthesis engineering and the current development status of different 3D collectors in recent years (the current collectors are divided into two major parts: metal-based current collectors and carbon-based current collectors). In the end, some perspectives of the future promotion for LMA application are also presented.

Self-Adaptive Liquid Film: Dynamic Realization of Dendrite-Free Zn Deposition Toward Ultralong-Life Aqueous Zn Battery

The poor reversibility and stability of Zn metal anode (ZMA) caused by uncontrolled Zn deposition behaviors and serious side reactions severely impeded the practical application of aqueous Zn metal battery. Herein, a liquid-dynamic and self-adaptive protective layer (LSPL) was constructed on the ZMA surface for inhibiting dendrites and by-products formation. Interestingly, the outer LSPL consists of liquid perfluoropolyether (PFPE), which can dynamically adapt volume change during repeat cycling and inhibit side reactions. Moreover, it can also decrease the de-solvation energy barrier of Zn2+ by strong interaction between C-F bond and foreign Zn2+ , improving Zn2+ transport kinetics. For the LSPL inner region, in-situ formed ZnF2 through the spontaneous chemical reaction between metallic Zn and part PFPE can establish an unimpeded Zn2+ migration pathway for accelerating ion transfer, thereby restricting Zn dendrites formation. Consequently, the LSPL-modified ZMA enables reversible Zn deposition/dissolution up to 2000 h at 1 mA cm-2 and high coulombic efficiency of 99.8% at 4 mA cm-2 . Meanwhile, LSPL@Zn||NH4 V4 O10 full cells deliver an ultralong cycling lifespan of 100 00 cycles with 0.0056% per cycle decay rate at 10 A g-1 . This self-adaptive layer provides a new strategy to improve the interface stability for next-generation aqueous Zn battery.

Carbonized Polymer Dots for Controlling Construction of MoS2 Flower-Like Nanospheres to Achieve High-Performance Li/Na Storage Devices

Despite being one of the most promising materials in anode materials, molybdenum sulfide (MoS2 ) encounters certain obstacles, such as inadequate cycle stability, low conductivity, and unsatisfactory charge-discharge (CD) rate performance. In this study, a novel approach is employed to address the drawbacks of MoS2 . Carbon polymer dots (CPDs) are incorporated to prepare three-dimensional (3D) nanoflower-like spheres of MoS2 @CPDs through the self-assembly of MoS2 2D nanosheets, followed by annealing at 700 °C. The CPDs play a main role in the creation of the nanoflower-like spheres and also mitigate the MoS2 nanosheet limitations. The nanoflower-like spheres minimize volume changes during cycling and improve the rate performance, leading to exceptional rate performance and cycling stability in both Lithium-ion and Sodium-ion batteries (LIBs and SIBs). The optimized MoS2 @CPDs-2 electrode achieves a superb capacity of 583.4 mA h g-1 at high current density (5 A g-1 ) after 1000 cycles in LIBs, and the capacity remaining of 302.8 mA h g-1 after 500 cycles at 5 A g-1 in SIBs. Additionally, the full cell of LIBs/SIBs exhibits high capacity and good cycling stability, demonstrating its potential for practical application in fast-charging and high-energy storage.

Reshaping Inner Helmholtz Layer and Electrolyte Structure via Multifunctional Organic Molecule Enabling Dendrite-Free Zn Metal Anode

The dendrite growth and parasitic reactions that occur on Zn metal anode (ZMA)/electrolyte interface hinder the development of aqueous zinc ion batteries (AZIBs) in next-generation renewable energy storage systems. Fortunately, reconstructing the inner Helmholtz layer (IHL) by introducing an electrolyte additive, is viewed as one of the most promising strategies to harvest the stable ZMA. Herein, (4-chloro-3-nitrophenyl) (pyridin-4-yl) methanone (CNPM) with quadruple functional groups is introduced into the ZnSO4 electrolyte to reshape the interface between ZMA and electrolyte and change the solvation structure of Zn2+ . Density functional theory (DFT) calculations manifest that the ─C═O, ─Cl, ─C═N─, and ─NO2 functional groups of CNPM interact with metallic Zn simultaneously and adsorb on the ZMA surface in a parallel arrangement manner, thus forming a water-poor IHL and creating well-arranged ion transportation channels. Furthermore, theoretical calculations and experimental results demonstrate that CNPM absorbed on the Zn anode surface can serve as zincophilic sites for inducing uniform Zn deposition along the (002) plane. Benefiting from the synergistic effect of these functions, the dendrite growth and parasitic reactions are suppressed significantly. As a result, ZMA exhibits a long cycle life (2900 h) and high coulombic efficiency (CE) (500 cycles) in the ZnSO4 +CNPM electrolyte.

Manipulation of the LiZn Alloy Process toward High-Efficiency Lithium Metal Anodes

Synthesis of alloy-type materials (X) is one of the most effective approaches to limit lithium dendrites in Li metal anode (LMA) because of their satisfactory lithiophilicity and easy electrochemical reaction with lithium. However, current investigations have only focused on the influence of the resulting alloyed products (LiX) on the properties of LMA, but the alloying reaction process between Li⁺ and X has been mostly ignored. Herein, by masterly taking advantage of the alloying reaction process, a novel approach is developed to more effectively inhibit lithium dendrites than the conventional strategy that just considers the utilization of alloyed products LiX. A three-dimensional substrate material loaded with metallic Zn on the surface of Cu foam is synthesized by a simple electrodeposition process. During Li plating/stripping, both alloy reaction processes between Li⁺ and Zn and LiZn product are involved, which makes the disordered Li⁺ flux near the substrate first react with Zn metal and then results in an even Li⁺ concentration for more uniform Li nucleation and growth. The full cell (Li-Cu@Zn-15//LFP) exhibits the reversible capacity of 122.5 mAh g^-1, and a high capacity retention of 95% is achieved after 180 cycles. This work proposes a valuable concept for the development of alloy-type materials in energy storage devices.

Construction of Bimetallic Heterojunction Based on Porous Engineering for High Performance Flexible Asymmetric Supercapacitors

It remains a great challenge to design and manufacture battery-type supercapacitors with satisfactory flexibility, appropriate mechanical property, and high energy density under high power density. Herein, a concept of porous engineering is proposed to simply prepare two-layered bimetallic heterojunction with porous structures. This concept is successfully applied in fabrication of flexible electrode based on CuO-Co(OH)₂ lamella on Cu-plated carbon cloth (named as CPCC@CuO@Co(OH)₂ ). The unique structure brings the electrode a high specific capacity of 3620 mF cm^-2 at 2 mA cm^-2 and appropriate mechanical properties with Young's modulus of 302.0 MPa. Density functional theory calculations show that porous heterojunction provides a higher intensity of electron state density near the Fermi level (E-E_f  = 0 eV), leading to a highly conductive CPCC@CuO@Co(OH)₂ electrode with both efficient charge transport and rapid ion diffusion. Notably, the supercapacitor assembled from CPCC@CuO@Co(OH)₂ //CC@AC shows high energy density of 127.7 W h kg^-1 at 750.0 W kg^-1 , remarkable cycling performance (95.53% capacity maintaining after 10 000 cycles), and desired mechanical flexibility. The methodology and results in this work will accelerate the transformative developments of flexible energy storage devices in practical applications.

ZnF2 -Riched Inorganic/Organic Hybrid SEI: in situ-Chemical Construction and Performance-Improving Mechanism for Aqueous Zinc-ion Batteries

Uncontrolled dendrites growth and serious parasitic reactions in aqueous electrolytes, greatly hinder the practical application of aqueous zinc-ion battery. On the basis of in situ-chemical construction and performance-improving mechanism, multifunctional fluoroethylene carbonate (FEC) is introduced into aqueous electrolyte to construct a high-quality and ZnF₂ -riched inorganic/organic hybrid SEI (ZHS) layer on Zn metal anode (ZMA) surface. Notably, FEC additive can regulate the solvated structure of Zn²⁺ to reduce H₂ O molecules reactivity. Additionally, the ZHS layer with strong Zn²⁺ affinity can avoid dendrites formation and hinder the direct contact between the electrolyte and anode. Therefore, the dendrites growth, Zn corrosion, and H₂ evolution reaction on ZMA in FEC-included ZnSO₄ electrolyte are highly suppressed. Thus, ZMA in such electrolyte realize a long cycle life over 1000 h and deliver a stable coulombic efficiency of 99.1 % after 500 cycles.

Carbonized Polymer Dots with Controllable N, O Functional Groups as Electrolyte Additives to Achieve Stable Li Metal Batteries

Electrolyte additive is an effective strategy to inhibit the uncontrolled growth of Li dendrites for lithium metal batteries (LMBs). However, most of the additives are complex synthesis and prone to decompose in cycling. Herein, in order to guide the homogeneous deposition of Li⁺ , carbonized polymer dots (CPDs) as electrolyte additives are successfully designed and synthesized by microwave (M-CPDs) and hydrothermal (H-CPDs) approaches. The controllable functional groups containing N or O (especially pyridinic-N, pyrrolic-N, and carboxyl group) enable CPDs to keep stable in electrolytes for at least 3 months. Meanwhile, the clusters formed between CPDs and Li⁺ through electrostatic interaction effectively guide the uniform Li dispersion and limit the "tip effect" and dendrite formation. Moreover, as lithiophilic groups increase, the strong electrostatic interference for the solvation effect of Li⁺ in the electrolyte is formed, which induces faster Li⁺ diffusion/transfer. As expected, H-CPDs achieve the ultra-even Li⁺ transfer. The corresponding Li//LiFePO₄ full cell delivers a high capacity retention rate of 93.8% after 200 cycles, which is much higher than that of the cells without additives (61.2%) and with M-CPDs (83.7%) as additives. The strategy in this work provides a theoretical direction for CPDs as electrolyte additives used in energy storage devices.

Spatially Confined Li Growth on Honeycomb-like Lithiophilic Layered Double Hydroxide Nanosheet Arrays toward a Stable Li Metal Anode

A lithium metal anode (LMA) is appealing due to its high theoretical capacity and low electrochemical potential. Unfortunately, the practical application of LMAs is restricted by the uncontrollable Li dendrite growth and tremendous volume change. Herein, lithiophilic honeycomb-like layered double hydroxide (LDH) nanosheet arrays supported on a flexible carbon cloth (NiMn-LDHs NAs@CC) are synthesized as the Li host to spatially confine the Li deposition, guiding Li growth via a conformal and uniform manner. First, the lithiophilic NiMn-LDHs NAs as nucleation seeds render the CC substance outstanding lithiophilicity and reduce the nucleation barrier. The hierarchical honeycomb-like structure then directs the oriented Li deposition and provides an open channel for fast ion transport. Finally, the CC skeleton offers a high specific surface for decreasing the inhomogeneous distribution of the current density and enough space for alleviating the volume variations, synergistically inhibiting the dendritic Li growth. As a consequence, the NiMn-LDHs NAs@CC symmetric cell exhibits a low overpotential of less than 17 mV at 2 mA cm^-2 and a long lifespan of 2100 h at 3 mA cm^-2. In addition, when paired with the LiNiCoMnO₂ (NCM111) cathode, the NiMn-LDHs NAs@CC@Li full cell presents enhanced cycling stability and rate capability in comparison to the CC@Li full cell, implying the great potential of the NiMn-LDHs NAs@CC in stabilizing the LMA.

Ion sieve membrane: Homogenizing Li+ flux and restricting polysulfides migration enables long life and highly stable Li-S battery

Limited by the notorious Li dendrites growth and serious polysulfide shuttle effect, the development of lithium-sulfur (Li-S) batteries is stagnant. Herein, a multifunctional separator composed of Cu-based metal-organic framework (Cu-MOF) and Li-Nafion was proposed to address the above intractable issues. The Cu-MOF with homogeneous porous structure and abundant Lewis acidic sites not only promotes uniform Li⁺ flux, but also exhibits a strong chemical interaction with polysulfides to inhibit the shuttle effect. Moreover, the narrow pore size distribution in the Cu-MOF and negatively charged gap endowed by the -SO₃^- groups both act as ion sieve to facilitate the passage of Li⁺ and restrict the migration of polysulfide anions, synergistically mitigating the dendritic Li growth and polysulfides shuttling. As a result, the symmetric cell with MOF/Nafion separator achieves ultralong cycling stability (1000 h) and ultralow overpotential of 20 mV at a current density of 1.0 mA cm^-2. Importantly, in the assembled Li-S full battery, the modified PP separator presents the superior cycle stability with capacity retention of 90% after 300 cycles at 0.5 C. Current outcomes open up a new route to design functional separators with ion permselective for realizing the dendrite-free and high-performance Li-S battery.

Carbon nitride based Schottky junction with a Ni–Mo synergistic interaction for highly efficient photocatalytic hydrogen production

A CN/3NiMoP2 Schottky junction with a Ni–Mo synergistic interaction demonstrates a comparable photocatalytic HER performance to CN/3 wt% Pt and satisfactory stability.

Sustainable and Robust Graphene Cellulose Paper Decorated with Lithiophilic Au Nanoparticles to Enable Dendrite-free and High-Power Lithium Metal Anode

Lithium metal anodes (LMAs) with high energy density have recently captured increasing attention for development of next-generation batteries. However, practical viability of LMAs is hindered by the uncontrolled Li dendrite growth and infinite dimension change. Even though constructing 3D conductive skeleton has been regarded as a reliable strategy to prepare stable and low volume stress LMAs, engineering the renewable and lithiophilic conductive scaffold is still a challenge. Herein, a robust conductive scaffold derived from renewable cellulose paper, which is coated with reduced graphene oxide and decorated with lithiophilic Au nanoparticles, is engineered for LMAs. The graphene cellulose fibres with high surface area can reduce the local current density, while the well-dispersed Au nanoparticles can serve as lithiophilic nanoseeds to lower the nucleation overpotential of Li plating. The coupled relationship can guarantee uniform Li nucleation and unique spherical Li growth into 3D carbon matrix. Moreover, the natural cellulose paper possesses outstanding mechanical strength to tolerate the volume stress. In virtue of the modulated deposition behaviour and near-zero volume change, the hybrid LMAs can achieve reversible Li plating/stripping even at an ultrahigh current density of 10 mA cm^-2 as evidenced by high Coulombic efficiency (97.2 % after 60 cycles) and ultralong lifespan (1000 cycles) together with ultralow overpotential (25 mV). Therefore, this strategy sheds light on a scalable approach to multiscale design versatile Li host, promising highly stable Li metal batteries to be feasible and practical.

In situ chemically encapsulated and controlled SnS2 nanocrystal composites for durable lithium/sodium-ion batteries

SnS2 as the promising anode for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) still encounters the undesirable rate performance and cycle stability. Herein, a unique stable structure is developed, where the SnS2 nanocrystals (NCs) are sturdily encapsulated by carbon shells anchored on a reduced graphene oxide (rGO) via the one-pot solvothermal process. The well-controlled carbon shells provide the enduring protection for SnS2 NCs through C-S covalent bonds from the corrosion of electrolyte and pulverization of structure. Moreover, both experimental results and density functional theory (DFT) calculations demonstrate that the carbon protective shell effectively enhances the structure stability and conductivity of the resulting materials. Interestingly, the size of SnS2 NCs and the thickness of carbon shells are accurately controlled by regulating the content of glucose. Aided by the advanced electron/ion transfer kinetics and structure stability, the SnS2-based electrode exhibits desired lithium/sodium storage performance and unprecedented long-term cycling stability (capacity retention of 74.7% after 1000 cycles at 2 A g-1 for LIBs and 102% after 200 cycles at 500 mA g-1 for SIBs). This work develops a method for promoting the practical applications and large-scale production of SnS2 composites for energy storage devices.

Retraction: Sublimable cationic Ir(iii) phosphor using chlorine as a counterion for high-performance monochromatic and white OLEDs

Retraction of ‘Sublimable cationic Ir(iii) phosphor using chlorine as a counterion for high-performance monochromatic and white OLEDs’ by Lei Ding et al., Chem. Commun., 2018, 54, 11761–11764.

Micro/Nanoengineered α-Fe2 O3 Nanoaggregate Conformably Enclosed by Ultrathin N-Doped Carbon Shell for Ultrastable Lithium Storage and Insight into Phase Evolution Mechanism

The Fe-based transition metal oxides are promising anode candidates for lithium storage considering their high specific capacity, low cost, and environmental compatibility. However, the poor electron/ion conductivity and significant volume stress limit their cycle and rate performances. Furthermore, the phenomena of capacity rise and sudden decay for α-Fe₂ O₃ have appeared in most reports. Here, a uniform micro/nano α-Fe₂ O₃ nanoaggregate conformably enclosed in an ultrathin N-doped carbon network (denoted as M/N-α-Fe₂ O₃ @NC) is designed. The M/N porous balls combine the merits of secondary nanoparticles to shorten the Li⁺ transportation pathways as well as alleviating volume expansion, and primary microballs to stabilize the electrode/electrolyte interface. Furthermore, the ultrathin carbon shell favors fast electron transfer and protects the electrode from electrolyte corrosion. Therefore, the M/N-α-Fe₂ O₃ @NC electrode delivers an excellent reversible capacity of 901 mA h g^-1 with capacity retention up to 94.0 % after 200 cycles at 0.2 A g^-1 . Notably, the capacity rise does not happen during cycling. Moreover, the lithium storage mechanism is elucidated by ex situ XRD and HRTEM experiments. It is verified that the reversible phase transformation of α↔γ occurs during the first cycle, whereas only the α-Fe₂ O₃ phase is reversibly transformed during subsequent cycles. This study offers a simple and scalable strategy for the practical application of high-performance Fe₂ O₃ electrodes.

Tailoring Coral-Like Fe7Se8@C for Superior Low-Temperature Li/Na-Ion Half/Full Batteries: Synthesis, Structure, and DFT Studies

The intrinsic charge-transfer property bears the primary responsibility for the sluggish redox kinetics of the common electrode materials, especially operated at low temperatures. Herein, we report the crafting of homogeneously confined Fe₇Se₈ nanoparticles with a well-defined graphitic carbon matrix that demonstrate a highly efficient charge-transfer system in a designed natural coral-like structure (cl-Fe₇Se₈@C). Notably, the intricate architecture as well as highly conductive peculiarity of C concurrently satisfy the demands of achieving fast ionic/electrical conductivities for both Li/Na-ion batteries in a wide temperature range. For example, when cl-Fe₇Se₈@C is employed as the anode material to assemble full batteries with the cathode of Na₃V₂(PO₄)₂O₂F (NVPOF), decent capacities of 323.1 and 175.9 mA h g^-1 can be acquired at temperatures of 25 and -25 °C, respectively. This work is significant for further developing potential anode materials for advanced energy storage and conversion under low-temperature conditions.

Invited review: Advances and challenges in application of feedomics to improve dairy cow production and health

Dairy cattle science has evolved greatly over the past century, contributing significantly to the improvement in milk production achieved today. However, a new approach is needed to meet the increasing demand for milk production and address the increased concerns about animal health and welfare. It is now easy to collect and access large and complex data sets consisting of molecular, physiological, and metabolic data as well as animal-level data (such as behavior). This provides new opportunities to better understand the mechanisms regulating cow performance. The recently proposed concept of feedomics could help achieve this goal by increasing our understanding of interactions between the different components or levels and their impact on animal production. Feedomics is an emerging field that integrates a range of omics technologies (e.g., genomics, epigenomics, transcriptomics, proteomics, metabolomics, metagenomics, and metatranscriptomics) to provide these insights. In this way, we can identify the best strategies to improve overall animal productivity, product quality, welfare, and health. This approach can help research communities elucidate the complex interactions among nutrition, environment, management, animal genetics, metabolism, physiology, and the symbiotic microbiota. In this review, we summarize the outcomes of the most recent research on omics in dairy cows and highlight how an integrated feedomics approach could be applied in the future to improve dairy cow production and health. Specifically, we focus on 2 topics: (1) improving milk yield and milk quality, and (2) understanding metabolic physiology in transition dairy cows, which are 2 important challenges faced by the dairy industry worldwide.

Assessment of rumen bacteria in dairy cows with varied milk protein yield

The present study was conducted to assess rumen bacteria in lactating cows with different milk protein yield, aiming to understand the role of rumen bacteria in this trait. Cows with high milk protein yield (high milk yield and high milk protein content, HH; n = 20) and low milk protein yield (low milk yield and low milk protein content, LL; n = 20) were selected from 374 mid-lactation Holstein dairy cows fed a high-grain diet. Measurement of the rumen fermentation products showed that the concentrations of ruminal total volatile fatty acids, propionate, butyrate, and valerate and the proportion of isobutyrate were higher in the HH cows than in the LL cows. Amplicon sequencing analysis of the rumen bacterial community revealed that the richness (Chao 1 index) of rumen microbiota was higher in the LL cows than in the HH cows. Among the 10 predominant bacterial phyla (relative abundance being >0.10%, present in >60% of animals within each group), the relative abundance of Proteobacteria was 1.36-fold higher in the HH cows than in the LL cows. At the genus level, the relative abundance of Succinivibrio was significantly higher and that of Clostridium tended to be higher in the LL cows than in the HH cows. Sharpea was 2.28-fold enriched in the HH cows compared with the LL cows. Different relationships between the relative abundances of rumen microbial taxa and volatile fatty acid concentrations were observed in the HH and the LL animals, respectively. Succinivibrio and Prevotella were positively correlated with acetate, propionate, and valerate in the LL cows, whereas Sharpea was positively correlated with propionate and valerate concentrations in the HH cows. Collectively, our results revealed that rumen bacterial richness and the relative abundances of several bacterial taxa significantly differed between dairy cows with high and low milk protein yields, suggesting the potential roles of rumen microbiota contributing to milk protein yield in dairy cows.

Short communication: Relationship of blood DNA methylation rate and milk performance in dairy cows

The objective of this study was to investigate the global methylation rate in blood DNA and its relationship with lactation performance. A total of 196 mid-lactation dairy cows were fed the same diet under the same management. Milk yield was recorded and blood samples were collected from the jugular vein before morning feeding. The blood global DNA methylation rates were quantified using a methylation quantification kit. Overall, the average blood global DNA methylation rate of all cows was 12.4%. When DNA methylation rates were compared between cows with high (n = 40; 37.0 to 42.0 kg/d) and low (n = 33; 24.0 to 30.0 kg/d) milk yield, DNA methylation rates in the lower-yield cows (14.1 ± 0.7%) were significantly higher than those in the higher-yield animals (11.6 ± 0.7%). Our results indicated an association of milk and protein yields with global DNA methylation rates in lactating dairy cows. However, further research is needed to determine whether this association reflects the true influence of epigenetic mechanisms on yield or whether other factors, such as different proportions of blood cell types in high- and low-yielding cows, affect apparent global DNA methylation levels.

Molecular Engineering of Phenylbenzimidazole-Based Orange Ir(III) Phosphors toward High-Performance White OLEDs

To develop B-O complementary-color white organic light-emitting diodes (WOLEDs) exhibiting high efficiency and low roll-off as well as color stability simultaneously, we have designed two orange iridium(III) complexes by simply controlling the position of the methoxyl group on the cyclometalated ligand. The obtained emitters mOMe-Ir-BQ and pOMe-Ir-BQ show good photophysical and electrochemical stabilities with a broadened full width at half-maximum close to 100 nm. The corresponding devices realize highly efficient electrophosphorescence with a maximum current efficiency (CE) and power efficiency (PE) of 24.4 cd A^-1 and 15.3 lm W^-1 at a high doping concentration of 15 wt %. Furthermore, the complementary-color all-phosphor WOLEDs based on these phosphors exhibit good performance with a maximum CE of 31.8 cd A^-1, PE of 25.0 lm W^-1, and external quantum efficiency of 15.5%. Particularly, the efficiency of this device is still as high as 29.3 cd A^-1 and 14.2% at the practical brightness level of 1000 cd m^-2, giving a small roll-off. Meanwhile, extremely high color stability is achieved by these devices with insignificant chromaticity variation.

Retracted Article: Sublimable cationic Ir(iii) phosphor using chlorine as a counterion for high-performance monochromatic and white OLEDs

A sublimable cationic Ir(iii) complex using chlorine as a counterion was synthesized to fabricate high-performance WOLEDs via a vacuum-deposition process for the first time.

Evaluation of Aphis glycines as an Alternative Host for Supporting Aphelinus albipodus Against Myzus persicae on Capsicum annuum cv. Ox Horn and Hejiao 13

Bank plant systems provide effective biological control for pests infesting commercially important crops. Aphids cause physical damage to crops by feeding on the leaves, as well as transmitting damaging viral diseases. To develop a bank plant system to control aphids that damage vegetable crops, we initially reared the parasitoid Aphelinus albipodus (Hayat and Fatima) on the soybean aphid, Aphis glycines (Matsumura) reared on the soybean plant, Glycine max (L.) that was elected as the alternate host. Parasitoid adults that emerged from A. glycines were allowed to parasitize second instar nymphs of the aphid Myzus persicae (Sulzer) which were reared on sweet pepper and chili pepper leaves. The results showed that A. albipodus females feeding and parasitizing M. persicae nymphs reared on sweet pepper lived for 18.9 days, with an average fecundity of 337.3 progenies/female, while females feeding and parasitizing on M. persicae nymphs reared on chili pepper lived for 18.8 days, with an average fecundity of 356.2 progenies/female. There were no significant difference in the development time and reproduction of A. albipodus individuals parasitizing M. persicae nymphs reared on sweet pepper and chili pepper plants. The intrinsic rate of increase (r), net reproductive rate (R ₀), net aphid killing rate (Z ₀), and finite aphid killing rate (θ) of A. albipodus parasitizing sweet pepper and chili pepper M. persicae was 0.2258 days^-1, 171.7 progeny adults, 222.6 aphids, and 0.4048 and 0.2295 days^-1, 191.8 progeny adults, 243.3 aphids, and 0.4021, respectively. Our results suggested that A. glycines could serve as an effective alternative host for supporting A. albipodus against M. persicae infesting sweet pepper and chili pepper.

Carbon-Free Porous Zn2GeO4 Nanofibers as Advanced Anode Materials for High-Performance Lithium Ion Batteries

In this work, carbon-free, porous, and micro/nanostructural Zn₂GeO₄ nanofibers (p-ZGONFs) have been prepared via a dissolution-recrystallization-assisted electrospinning technology. The successful electrospinning to fabricate the uniform p-ZGONFs mainly benefits from the preparation of completely dissolved solution, which avoids the sedimentation of common Ge-containing solid-state precursors. Electrochemical tests demonstrate that the as-prepared p-ZGONFs exhibit superior Li-storage properties in terms of high initial reversible capacity of 1075.6 mA h g^-1, outstanding cycling stability (no capacity decay after 130 cycles at 0.2 A g^-1), and excellent high-rate capabilities (e.g., still delivering a capacity of 384.7 mA h g^-1 at a very high current density of 10 A g^-1) when used as anode materials for lithium ion batteries (LIBs). All these Li-storage properties are much better than those of Zn₂GeO₄ nanorods prepared by a hydrothermal process. The much enhanced Li-storage properties should be attributed to its distinctive structural characteristics including the carbon-free composition, plentiful pores, and macro/nanostructures. Carbon-free composition promises its high theoretical Li-storage capacity, and plentiful pores cannot only accommodate the volumetric variations during the successive lithiation/delithiation but can also serve as the electrolyte reservoirs to facilitate Li interaction with electrode materials.

Synergistic Design of Cathode Region for the High-Energy-Density Li-S Batteries

The synergistic design of cathode region was conducted to minimize the shuttle effect of polysulfides and decrease the loading of inactive components in order to acquire high-energy-density lithium-sulfur (Li-S) batteries. The well-designed cathode region presented two special characteristics: one was the intertwined nanofibers interlayer based on ultrafine TiO₂ nanocrystal uniformly embedded within N-doping porous carbon; the other was the lightweight and three-dimensional current collector of fibrous cellulose paper coated by reduced graphene oxide. In consequence, the decent reversible capacity of 874.8 mA h g^-1 was acquired at 0.1 C with a capacity retention of 91.83% after 100 cycles. Besides, the satisfactory capacity of 670 mA h g^-1 was delivered after 300 cycles at 1 C with the small decay rate of only 0.08%. Because of higher capacity and lower loading of inactive component in cathode region, the energy density of cell increased more than five times compared with unmodified cell. Moreover, to further enhance the energy density, the high-sulfur-loading electrode was fabricated. A good areal capacity of 4.27 mA h cm^-2 was retained for the cell with the active material of 4 mg cm^-2 and the cycle stability was also well-maintained. In addition, due to the flexibility of interlayer and current collector, Li-S full cell (in pouch cell format) was easily curved. Therefore, the synergistic design for cathode region, which combines the flexible and mass-produced interlayer and current collector together, provides an effective access to Li-S batteries with high energy density and flexibility for practical application.

The Effective Design of a Polysulfide-Trapped Separator at the Molecular Level for High Energy Density Li-S Batteries

In this work, the lightweight and scalable organic macromolecule graphitic carbon nitride (g-C3N4) with enriched polysulfide adsorption sites of pyridinic-N was introduced to achieve the effective functionalization of separator at the molecular level. This simple method overcomes the difficulty of low doping content as well as the existence of an uncontrolled form of nitrogen heteroatom in the final product. Besides the conventional pyridinic-N-Li bond formed in the vacancies of g-C3N4, the C-S bond was interestingly observed between g-C3N4 and Li2S, which endowed g-C3N4 with an inherent adsorption capacity for polysulfides. In addition, the microsized g-C3N4 provided the coating layer with good mechanical strength to guarantee its restriction function for polysulfides during long cycling. As a result, an excellent reversible capacity of 840 mA h g(-1) was retained at 0.5 C after 400 cycles for a pure sulfur electrode, much better than that of the cell with an innocent carbon-coated separator. Even at a current density of 1 C, the cell still delivered a stable capacity of 732.7 mA h g(-1) after 500 cycles. Moreover, when further increasing the sulfur loading to 5 mg cm(-2), an excellent specific capacity of 1134.7 mA h g(-1) was acquired with the stable cycle stability, ensuring a high areal capacity of 5.11 mA h cm(-2). Besides the intrinsic adsorption ability for polysulfides, g-C3N4 is nontoxic and mass produced. Therefore, a scalable separator decorated with g-C3N4 and a commercial sulfur cathode promises high energy density for the practical application of Li-S batteries.

Hierarchically-Porous Carbon Derived from a Large-Scale Iron-based Organometallic Complex for Versatile Energy Storage

Inspired by the preparation of the hierarchically-porous carbon (HPC) derived from metal organic frameworks (MOFs) for energy storage, in this work, a simple iron-based metal- organic complex (MOC), which was simpler and cheaper compared with the MOF, was selected to achieve versatile energy storage. The intertwined 1 D nanospindles and enriched-oxygen doping of the HPC was obtained after one-step carbonization of the MOC. When employed in lithium-ion batteries, the HPC exhibited reversible capacity of 778 mA h g(-1) after 60 cycles at 50 mA g(-1) . Moreover, the HPC maintained a capacity of 188 mA h g(-1) after 400 cycles at 100 mA g(-1) as the anode material in a sodium-ion battery. In addition, the HPC served as the cathode matrix for evaluation of a lithium-sulfur battery. The general preparation process of the HPC is commercial, which is responsible for the large-scale production for its practical application.

In Situ Binding Sb Nanospheres on Graphene via Oxygen Bonds as Superior Anode for Ultrafast Sodium-Ion Batteries

Graphene incorporation should be one effective strategy to develop advanced electrode materials for a sodium-ion battery (SIB). Herein, the micro/nanostructural Sb/graphene composite (Sb-O-G) is successfully prepared with the uniform Sb nanospheres (∼100 nm) bound on the graphene via oxygen bonds. It is revealed that the in-situ-constructed oxygen bonds play a significant role on enhancing Na-storage properties, especially the ultrafast charge/discharge capability. The oxygen-bond-enhanced Sb-O-G composite can deliver a high capacity of 220 mAh/g at an ultrahigh current density of 12 A/g, which is obviously superior to the similar Sb/G composite (130 mAh/g at 10 A/g) just without Sb-O-C bonds. It also exhibits the highest Na-storage capacity compared to Sb/G and pure Sb nanoparticles as well as the best cycling performance. More importantly, this Sb-O-G anode achieves ultrafast (120 C) energy storage in SIB full cells, which have already been shown to power a 26-bulb array and calculator. All of these superior performances originate from the structural stability of Sb-O-C bonds during Na uptake/release, which has been verified by ex situ X-ray photoelectron spectroscopies and infrared spectroscopies.

A sulfur-free iridium(III) complex for highly selective and multi-signaling mercury(II)-chemosensors

A sulfur-free iridium(III) complex (pbi)2Ir(mtpy) (1) was successfully prepared and adopted as a Hg(II)-chemosensor with high selectivity and sensitivity. Multi-signaling responses towards Hg(II) ions were observed by UV-vis absorption, phosphorescence and electrochemistry measurements. With addition of Hg(II) ions, complex 1 presented quenched emission in its phosphorescence spectrum and the detection limit was as low as 2.5 × 10(-7) M. Additionally, its redox peak currents showed a broad linear relationship with the concentration of Hg(II) ions ranging from 0 to 500 μM, which was beneficial for the quantitative detection. Based on the (1)H NMR and ESI-MS analyses, the probing mechanism was tentatively supposed to be the Hg(2+)-induced changes in the local environment of complex 1. Such a response process was useful for achieving simple and effective detection of Hg(II) ions as well as developing more chemosensors.

A Novel Layered Sedimentary Rocks Structure of the Oxygen-Enriched Carbon for Ultrahigh-Rate-Performance Supercapacitors

In this paper, gelatin as a natural biomass was selected to successfully prepare an oxygen-enriched carbon with layered sedimentary rocks structure, which exhibited ultrahigh-rate performance and excellent cycling stability as supercapacitors. The specific capacitance reached 272.6 F g(-1) at 1 A g(-1) and still retained 197.0 F g(-1) even at 100 A g(-1) (with high capacitance retention of 72.3%). The outstanding electrochemical performance resulted from the special layered structure with large surface area (827.8 m(2) g(-1)) and high content of oxygen (16.215 wt %), which effectively realized the synergistic effects of the electrical double-layer capacitance and pseudocapacitance. Moreover, it delivered an energy density of 25.3 Wh kg(-1) even with a high power density of 34.7 kW kg(-1) and ultralong cycling stability (with no capacitance decay even over 10,000 cycles at 2 A g(-1)) in a symmetric supercapacitor, which are highly desirable for their practical application in energy storage devices and conversion.

Towards an efficient blue emission cationic Ir(iii) complex with azole-type ancillary ligands: a joint theoretical and experimental study

A highly efficient blue emitting cationic Ir(iii) complex based on 1,2,4-triazole-pyridine ligands modified by a simple methyl moiety is reported.

Polypyrrole-coated flower-like Pd nanoparticles (Pd NPs@PPy) with enhanced stability and heat conversion efficiency for cancer photothermal therapy

Novel kind of polypyrrole-coated flower-like Pd nanoparticles (Pd NPs@PPy) was synthesized to show a photothermal conversion efficiency (η) of 96.0% at 808 nm.

Low efficiency roll-off and high performance OLEDs employing alkyl group modified iridium(iii) complexes as emitters

Four Ir(iii) dyes employing modified 1,2-diphenyl-1H-benzoimidazole ligands were synthesized. Doped device using tBu-Ir-PI with tert-butyl group as emitter achieves high η_c of 42.0 cd A⁻¹ and η_p of 27.0 lm W⁻¹, respectively.

Nanoscale Polysulfides Reactors Achieved by Chemical Au-S Interaction: Improving the Performance of Li-S Batteries on the Electrode Level

In this work, the chemical interaction of cathode and lithium polysulfides (LiPSs), which is a more targeted approach for completely preventing the shuttle of LiPSs in lithium-sulfur (Li-S) batteries, has been established on the electrode level. Through simply posttreating the ordinary sulfur cathode in atmospheric environment just for several minutes, the Au nanoparticles (Au NPs) were well-decorated on/in the surface and pores of the electrode composed of commercial acetylene black (CB) and sulfur powder. The Au NPs can covalently stabilize the sulfur/LiPSs, which is advantageous for restricting the shuttle effect. Moreover, the LiPSs reservoirs of Au NPs with high conductivity can significantly control the deposition of the trapped LiPSs, contributing to the uniform distribution of sulfur species upon charging/discharging. The slight modification of the cathode with <3 wt % Au NPs has favorably prospered the cycle capacity and stability of Li-S batteries. Moreover, this cathode exhibited an excellent anti-self-discharge ability. The slight decoration for the ordinary electrode, which can be easily accessed in the industrial process, provides a facile strategy for improving the performance of commercial carbon-based Li-S batteries toward practical application.

Double Carbon Nano Coating of LiFePO4 Cathode Material for High Performance of Lithium Ion Batteries

Double carbon-coated LiFePO4 (D-LiFePO4/C) composite with sphere-like structure was synthesized through combination of co-precipitation and solid-state methods. Cetyl-trimethyl-ammonium bromide (CTAB) and citric acid served as two kinds of carbon sources in sequence. SEM images demonstrated that double carbon coating had certain influence on the morphology. The thickness of carbon coating on D-LiFePO4/C was about 1.7 nm and the content of carbon was 2.48 wt%, according to HRTEM and TG analysis. The electrochemical impedance spectroscopy analysis indicated that the D-LiFePO4/C composite presented the charge-transfer resistance of 68 Ω and Li ion diffusion coefficient of 2.68 x 10(-13) cm2 S(-1), while the single carbon-coated LiFePO4 (S-LiFePO4/C) exhibited 135.5Ω and 4.03 x 10(-14) cm2 S(-1). Especially, the prepared D-LiFePO4/C electrode showed discharge capacities of 102.9 (10C) and 87.1 (20C) mA h g(-1), respectively, with almost no capacity lost after 400 cycles at 10C, which were much better than those of S-LiFePO4/C composite.

The Effects of Dietary Phosphorus on the Growth Performance and Phosphorus Excretion of Dairy Heifers

The objective of this study was to investigate the effects of reducing dietary phosphorus (P) on the frame size, udder traits, blood parameters and nutrient digestibility coefficient in 8- to 10-month-old Holstein heifers. Forty-five heifers were divided into 15 blocks according to the mo of age and were randomly assigned one of three dietary treatments: 0.26% (low P [LP]), 0.36% (medium P [MP]), or 0.42% (high P [HP]) (dry matter basis). Samples were collected at the wk 1, 4, 8. The results show that low dietary P had no effect on body measurement. The blood P concentration decreased with decreasing dietary P (p<0.05), while the blood calcium content of LP was higher than that of the MP and HP groups (p<0.05), though still in the normal range. The serum contents of alkalinephosphatase, potassium, and magnesium were similar among the treatments. No differences were found in all nutrients' apparent digestibility coefficients with varied dietary P. However, with P diet decreased from HP to LP, the total fecal P and urine P concentration declined significantly, as did fecal water soluble P (p<0.05). In conclusion, reducing the dietary P from 0.42% to 0.26% did not negatively affect the heifers' growth performance but did significantly lessen manure P excretion into the environment.

Effects of corn and soybean meal types on rumen fermentation, nitrogen metabolism and productivity in dairy cows

Twelve multiparous Holstein dairy cows in mid-lactation were selected for a replicated 4×4 Latin square design with a 2 ×2 factorial arrangement to investigate the effects of corn and soybean meal (SBM) types on rumen fermentation, N metabolism and lactation performance in dairy cows. Two types of corn (dry ground [DGC] and steam-flaked corn [SFC]) and two types of SBM (solvent-extracted and heat-treated SBM) with different ruminal degradation rates and extents were used to formulate four diets with the same basal ingredients. Each period lasted for 21 days, including 14 d for adaptation and 7 d for sample collection. Cows receiving SFC had a lower dry matter (DM) and total N intake than those fed DGC. However, the milk yield and milk protein yield were not influenced by the corn type, resulting in higher feed and N utilization efficiency in SFC-fed cows than those receiving DGC. Ruminal acetate concentrations was greater and total volatile fatty acids concentrations tended to be greater for cows receiving DGC relative to cows fed SFC, but milk fat content was not influenced by corn type. The SFC-fed cows had lower ruminal ammonia-N, less urea N in their blood and milk, and lower fecal N excretion than those on DGC. Compared with solvent-extracted SBM-fed cows, cows receiving heat-treated SBM had lower microbial protein yield in the rumen, but similar total tract apparent nutrient digestibility, N metabolism measurements, and productivity. Excessive supply of metabolizable protein in all diets may have caused the lack of difference in lactation performance between SBM types. Results of the present study indicated that increasing the energy degradability in the rumen could improve feed efficiency, and reduce environmental pollution.

A plum-pudding like mesoporous SiO2/flake graphite nanocomposite with superior rate performance for LIB anode materials

A novel kind of plum-pudding like mesoporous SiO₂ nanospheres (MSNs) and flake graphite (FG) nanocomposite (pp-MSNs/FG) was designed and fabricated via a facile and cost-effective hydrothermal method.

Fabrication of functionalized polysulfide reservoirs from large graphene sheets to improve the electrochemical performance of lithium–sulfur batteries

Large graphene sheets (LTG) serve as better polysulfide reservoirs to acquire better capacity retention compared to smaller graphene sheets (STG).

High-efficiency aqueous-processed hybrid solar cells with an enormous Herschel infrared contribution

Aqueous-processed solar cells have evolved into a new generation of promising and renewable energy materials due to their excellent optical, electrical, and low-cost properties. In this work, Cd0.75Hg0.25Te colloid quantum dots (CQDs) were incorporated into a water-soluble conjugated polymer with broad absorption and high charge-carrier-mobility (5 × 10(-4) cm(2) V(-1) s(-1)) to obtain a composite with an absorption spectrum ranging from 300 to 1200 nm. The matched energy level between polymer and CQDs ensured the effective electron transfer, while the interpenetrating network structure formed via heat treatment guaranteed the quick electron transport. Moreover, the formation process of the interpenetrating network was systematically monitored by using AFM and TEM instruments and further confirmed through the measurement of charge-carrier-mobility of the active layers. In combination with the surface modification of a single Cd0.75Hg0.25Te layer, this aqueous-processed solar cell showed excellent photovoltaic response and the power conversion efficiency (PCE) reached 2.7% under AM 1.5 G illumination (100 mW cm(-2)). Especially, the contribution of the Herschel infrared region (780-1100 nm) to the photocurrent was as high as 15.04%. This device showed the highest PCE among organic-inorganic hybrid solar cells (HSCs) based on CdxHg1-xTe CQDs and the highest near infrared (NIR) contribution among aqueous-processed HSCs, indicating the enormous potential of taking advantage of NIR energy in a solar spectrum and a promising application in solar cells especially used in cloudy weather.