1
|
Huang H, Wang W, Liu Z, Jian H, Xue B, Zhu L, Yue K, Yang S. Stepwisely Assembled Multicomponent Fiber with High Water Content and Superior Mechanical Properties for Artificial Ligament. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2308063. [PMID: 38200674 DOI: 10.1002/smll.202308063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2023] [Revised: 12/09/2023] [Indexed: 01/12/2024]
Abstract
The ligament, which connects bones at the joints, has both high water content and excellent mechanical properties in living organisms. However, it is still challenging to fabricate fibrous materials that possess high water content and ligament-like mechanical characteristics simultaneously. Herein, the design and preparation of a ligament-mimicking multicomponent fiber is reported through stepwise assembly of polysaccharide, calcium, and dopamine. In simulated body fluid, the resulting fiber has a water content of 40 wt%, while demonstrating strength of ≈120 MPa, a Young's modulus of ≈3 GPa, and a toughness of ≈25 MJ m-3. Additionally, the multicomponent fiber exhibits excellent creep and fatigue resistance, as well as biocompatibility to support cell growth in vitro. These findings suggest that the fiber has potential for engineering high-performance artificial ligament.
Collapse
Affiliation(s)
- Hao Huang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Weijie Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Zexin Liu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Hanxin Jian
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Bing Xue
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Liping Zhu
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Kan Yue
- South China Advanced Institute for Soft Mater Science and Technology, School of Molecular Science and Engineering, South China University of Technology, Guangzhou, 510640, P. R. China
| | - Shuguang Yang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Center for Advanced Low-dimension Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| |
Collapse
|
2
|
Lu C, Jiang H, Cheng X, He J, Long Y, Chang Y, Gong X, Zhang K, Li J, Zhu Z, Wu J, Wang J, Zheng Y, Shi X, Ye L, Liao M, Sun X, Wang B, Chen P, Wang Y, Peng H. High-performance fibre battery with polymer gel electrolyte. Nature 2024; 629:86-91. [PMID: 38658763 DOI: 10.1038/s41586-024-07343-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2023] [Accepted: 03/22/2024] [Indexed: 04/26/2024]
Abstract
Replacement of liquid electrolytes with polymer gel electrolytes is recognized as a general and effective way of solving safety problems and achieving high flexibility in wearable batteries1-6. However, the poor interface between polymer gel electrolyte and electrode, caused by insufficient wetting, produces much poorer electrochemical properties, especially during the deformation of the battery7-9. Here we report a strategy for designing channel structures in electrodes to incorporate polymer gel electrolytes and to form intimate and stable interfaces for high-performance wearable batteries. As a demonstration, multiple electrode fibres were rotated together to form aligned channels, while the surface of each electrode fibre was designed with networked channels. The monomer solution was effectively infiltrated first along the aligned channels and then into the networked channels. The monomers were then polymerized to produce a gel electrolyte and form intimate and stable interfaces with the electrodes. The resulting fibre lithium-ion battery (FLB) showed high electrochemical performances (for example, an energy density of about 128 Wh kg-1). This strategy also enabled the production of FLBs with a high rate of 3,600 m h-1 per winding unit. The continuous FLBs were woven into a 50 cm × 30 cm textile to provide an output capacity of 2,975 mAh. The FLB textiles worked safely under extreme conditions, such as temperatures of -40 °C and 80 °C and a vacuum of -0.08 MPa. The FLBs show promise for applications in firefighting and space exploration.
Collapse
Affiliation(s)
- Chenhao Lu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Haibo Jiang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Xiangran Cheng
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Jiqing He
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Yao Long
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Yingfan Chang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Xiaocheng Gong
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Kun Zhang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Jiaxin Li
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Zhengfeng Zhu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Jingxia Wu
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Jiajia Wang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Yuanyuan Zheng
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Xiang Shi
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Lei Ye
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Meng Liao
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Xuemei Sun
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Bingjie Wang
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Peining Chen
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China
| | - Yonggang Wang
- Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, China
| | - Huisheng Peng
- State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Electronic Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China.
| |
Collapse
|
3
|
Li Y, Wang Y, Liu Y, Yan F, Zhu Z, Chen X, Qiu J, Zhang H, Cao G. Polymer Engineering Enables High Linear Capacity Fiber Electrodes by Microenvironment Regulation. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024:e2309461. [PMID: 38671588 DOI: 10.1002/advs.202309461] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/05/2023] [Indexed: 04/28/2024]
Abstract
Unlike bulky and rigid traditional power systems, 1D fiber batteries possess appealing features such as flexibility and adaptability, which are promising for use in wearable electronic devices. However, the performance and energy density fiber batteries are limited by the contradiction between ionic transfer and robust structure of fiber electrodes. Herein, these problems are addressed via polymer engineering to regulate the microenvironment in electrodes, realizing high-linear-capacity thick fiber electrodes with excellent cycling performance. The porosity of the electrodes is regulated using polymer crosslink networks designed with various components, and lithium-ion transfer is optimized through ether-abundant polymer chains. Furthermore, reinforced covalent bonding with carbon nanotube networks is established based on the modified functional groups of polymer networks. The multiscale optimizations of the porous structure, ionic transportation, and covalent bonding network enhance the lithium-ion dynamics property and structural stability. Therefore, ultrahigh linear-capacity fiber electrodes (17.8 mAh m-1) can be fabricated on a large scale and exhibit excellent stability (92.8% after 800 cycles), demonstrating obvious superiority among the reported fiber electrodes. Moreover, this study highlights the high effectiveness of polymer regulation in fiber electrodes and offers new avenues for designing next-generation wearable energy-storage systems.
Collapse
Affiliation(s)
- Yuan Li
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Yibo Wang
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Yan Liu
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Fang Yan
- School of Chemistry and Biological Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, China
| | - Zhenwei Zhu
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Xibang Chen
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Jingyi Qiu
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Hao Zhang
- Research Institute of Chemical Defense, Beijing, 100191, China
| | - Gaoping Cao
- Research Institute of Chemical Defense, Beijing, 100191, China
| |
Collapse
|
4
|
Wang Y, Liu X, Ge R, Moretti M, Yin J, Zhao Z, Valle-Pérez AU, Liu H, Tian Z, Guo T, Zhu Y, Hauser CAE, Alshareef HN. Peptide Gel Electrolytes for Stabilized Zn Metal Anodes. ACS NANO 2024; 18:164-177. [PMID: 38133949 DOI: 10.1021/acsnano.3c04414] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/24/2023]
Abstract
The rechargeable aqueous Zn ion battery (AZIB) is considered a promising candidate for future energy storage applications due to its intrinsic safety features and low cost. However, Zn dendrites and side reactions (e.g., corrosion, hydrogen evolution reaction, and inactive side product (Zn hydroxide sulfate) formation) at the Zn metal anode have been serious obstacles to realizing a satisfactory AZIB performance. The application of gel electrolytes is a common strategy for suppressing these problems, but the normally used highly cross-linked polymer matrix (e.g., polyacrylamide (PAM)) brings additional difficulties for battery assembly and recycling. Herein, we have developed a gel electrolyte for Zn metal anode stabilization, where a peptide matrix, a highly biocompatible material, is used for gel construction. Various experiments and simulations elucidate the sulfate anion-assisted self-assembly gel formation and its effect in stabilizing Zn metal anodes. Unlike polymer gel electrolytes, the peptide gel electrolyte can reversibly transform between gel and liquid states, thus facilitating the gel-involved battery assembly and recycling. Furthermore, the peptide gel electrolyte provides fast Zn ion diffusion (comparable to conventional liquid electrolyte) while suppressing side reactions and dendrite growth, thus achieving highly stable Zn metal anodes as validated in various cell configurations. We believe that our concept of gel electrolyte design will inspire more future directions for Zn metal anode protection based on gel electrolyte design.
Collapse
Affiliation(s)
- Yizhou Wang
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Xinzhi Liu
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Rui Ge
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Manola Moretti
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Jian Yin
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Zhiming Zhao
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Alexander U Valle-Pérez
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Hao Liu
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Zhengnan Tian
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Tianchao Guo
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Yunpei Zhu
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Charlotte A E Hauser
- Laboratory for Nanomedicine, Division of Biological & Environmental Science & Engineering (BESE) and Computational Bioscience Research Center (CBRC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| | - Husam N Alshareef
- Materials Science and Engineering, Physical Science and Engineering Division (PSE), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Saudi Arabia
| |
Collapse
|
5
|
Pu J, Cao Q, Gao Y, Wang Q, Geng Z, Cao L, Bu F, Yang N, Guan C. Liquid Metal-Based Stable and Stretchable Zn-Ion Battery for Electronic Textiles. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2305812. [PMID: 37714162 DOI: 10.1002/adma.202305812] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 08/30/2023] [Indexed: 09/17/2023]
Abstract
Electronic textiles harmoniously interact with the human body and the surrounding environment, offering tremendous interest in smart wearable electronics. However, their wide application faces challenges due to the lack of stable and stretchable power electrodes/devices with multifunctional design. Herein, an intrinsically stretchable liquid metal-based fibrous anode for a stable Zn-ion battery (ZIB) is reported. Benefiting from the liquid feature and superior deformability of the liquid metal, optimized Zn ion concentration distribution and Zn (002) deposition behavior are observed, which result in dendrite-free performance even under stretching. With a strain of 50%, the ZIB maintains a high capacity of 139.8 mAh cm-3 (corresponding to 83.0% of the initial value) after 300 cycles, outperforming bare Zn fiber-based ZIB. The fibrous ZIB seamlessly integrates with the sensor, Joule heater, and wirelessly charging device, which provides a stable power supply for human signal monitoring and personal thermal management, holding promise for the application of wearable multifunctional electronic textiles.
Collapse
Affiliation(s)
- Jie Pu
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
- Key laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, 218 Qingyi Road, Ningbo, 315103, China
- School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Qinghe Cao
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
- Key laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, 218 Qingyi Road, Ningbo, 315103, China
| | - Yong Gao
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Qiangzheng Wang
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Zeyu Geng
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Leiqing Cao
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Fan Bu
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Nute Yang
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
| | - Cao Guan
- Frontiers Science Center for Flexible Electronics, Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, P. R. China
- Key laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, 218 Qingyi Road, Ningbo, 315103, China
| |
Collapse
|
6
|
Zong Y, Chen H, Wang J, Wu M, Chen Y, Wang L, Huang X, He H, Ning X, Bai Z, Wen W, Zhu D, Ren X, Wang N, Dou S. Cation Defect-Engineered Boost Fast Kinetics of Two-Dimensional Topological Bi 2 Se 3 Cathode for High-Performance Aqueous Zn-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2306269. [PMID: 37882357 DOI: 10.1002/adma.202306269] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/28/2023] [Revised: 10/18/2023] [Indexed: 10/27/2023]
Abstract
The challenge with aqueous zinc-ion batteries (ZIBs) lies in finding suitable cathode materials that can provide high capacity and fast kinetics. Herein, two-dimensional topological Bi2 Se3 with acceptable Bi-vacancies for ZIBs cathode (Cu-Bi2-x Se3 ) is constructed through one-step hydrothermal process accompanied by Cu heteroatom introduction. The cation-deficient Cu-Bi2-x Se3 nanosheets (≈4 nm) bring improved conductivity from large surface topological metal states contribution and enhanced bulk conductivity. Besides, the increased adsorption energy and reduced Zn2+ migration barrier demonstrated by density-functional theory (DFT) calculations illustrate the decreased Coulombic ion-lattice repulsion of Cu-Bi2-x Se3 . Therefore, Cu-Bi2-x Se3 exhibits both enhanced ion and electron transport capability, leading to more carrier reversible insertion proved by in situ synchrotron X-ray diffraction (SXRD). These features endow Cu-Bi2-x Se3 with sufficient specific capacity (320 mA h g-1 at 0.1 A g-1 ), high-rate performance (97 mA h g-1 at 10 A g-1 ), and reliable cycling stability (70 mA h g-1 at 10 A g-1 after 4000 cycles). Furthermore, quasi-solid-state fiber-shaped ZIBs employing the Cu-Bi2-x Se3 cathode demonstrate respectable performance and superior flexibility even under high mass loading. This work implements a conceptually innovative strategy represented by cation defect design in topological insulator cathode for achieving high-performance battery electrochemistry.
Collapse
Affiliation(s)
- Yu Zong
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Haichao Chen
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Jinsong Wang
- Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China
| | - Menghua Wu
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Yu Chen
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Liyu Wang
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Xinliang Huang
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Hongwei He
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Xin Ning
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Zhongchao Bai
- Institute of Energy Materials Science (IEMS), University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai, 200093, China
| | - Wen Wen
- Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201204, China
| | - Daming Zhu
- Shanghai Synchrotron Radiation Facility, Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201204, China
| | - Xiaochuan Ren
- Industrial Research Institute of Nonwovens & Technical Textiles, College of Textiles & Clothing, Shandong Center for Engineered Nonwovens, Institute of Materials for Energy and Environment, Qingdao University, Qingdao, 266071, China
| | - Nana Wang
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong Innovation Campus, North Wollongong, New South Wales, 2500, Australia
| | - Shixue Dou
- Institute of Energy Materials Science (IEMS), University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai, 200093, China
- Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong Innovation Campus, North Wollongong, New South Wales, 2500, Australia
| |
Collapse
|
7
|
Zhao X, Wang Y, Huang C, Gao Y, Huang M, Ding Y, Wang X, Si Z, Zhou D, Kang F. Tetraphenylporphyrin-based Chelating Ligand Additive as a Molecular Sieving Interfacial Barrier toward Durable Aqueous Zinc Metal Batteries. Angew Chem Int Ed Engl 2023; 62:e202312193. [PMID: 37772347 DOI: 10.1002/anie.202312193] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2023] [Revised: 09/29/2023] [Accepted: 09/29/2023] [Indexed: 09/30/2023]
Abstract
The sustained water consumption and uncontrollable dendrite growth strongly hamper the practical applications of rechargeable zinc (Zn) metal batteries (ZMBs). Herein, for the first time, we demonstrate that trace amount of chelate ligand additive can serve as a "molecular sieve-like" interfacial barrier and achieve highly efficient Zn plating/stripping. As verified by theoretical modeling and experimental investigations, the benzenesulfonic acid groups on the additive molecular not only facilitates its water solubility and selective adsorption on the Zn anode, but also effectively accelerates the de-solvation kinetics of Zn2+ . Meanwhile, the central porphyrin ring on the chelate ligand effectively expels free water molecules from Zn2+ via chemical binding against hydrogen evolution, and reversibly releases the captured Zn2+ to endow a dendrite-free Zn deposition. By virtue of this non-consumable additive, high average Zn plating/stripping efficiency of 99.7 % over 2100 cycles together with extended lifespan and suppressed water decomposition in the Zn||MnO2 full battery were achieved, thus opening a new avenue for developing highly durable ZMBs.
Collapse
Affiliation(s)
- Xin Zhao
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Yao Wang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Cong Huang
- College of Materials Science and Engineering Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology, Hunan University, 410082, Changsha, Hunan, China
| | - Yifu Gao
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Miaofei Huang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Yichen Ding
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Xia Wang
- Max-Planck-Institute for Chemical Physics of Solids, Nöthnitzer Straße 40, 01187, Dresden, Germany
| | - Zhichun Si
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Dong Zhou
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| | - Feiyu Kang
- Tsinghua Shenzhen International Graduate School, Tsinghua University, 518055, Shenzhen, Guangdong, China
| |
Collapse
|
8
|
Chodankar NR, Shinde PA, Patil SJ, Rama Raju GS, Hwang SK, Marje SJ, Tyagaraj HB, Al Hajri E, Al Ghaferi A, Huh YS, Han YK. Zn-ion Batteries: Charge Storing Mechanism and Development Challenges. CHEMSUSCHEM 2023; 16:e202300730. [PMID: 37485991 DOI: 10.1002/cssc.202300730] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2023] [Revised: 07/21/2023] [Accepted: 07/24/2023] [Indexed: 07/25/2023]
Abstract
Improving the energy share of renewable energy technologies is the only solution to reduce greenhouse gas emissions and air pollution. The high-performing green battery energy storage technologies are critical for storing energy to address the intermittent nature of renewable energy resources. In recent years, aqueous batteries, particularly Zn-ion batteries (ZIBs), have achieved and shown great potential for stationary energy storage systems owing to their low cost and safer operation. However, the practical applications of the ZIBs have significantly been impeded due to the gap between the breakthroughs achieved in academic research and industrial developments. The present review discusses the ZIB's advantages, possibilities, and shortcomings for stationary energy storage systems. The Review begins with a brief introduction to the ZIBs and their charge storage mechanisms based on the structural properties of cathode materials. The scientific and technical challenges that obstruct the commercialization of the ZIBs are discussed in detail concerning their impact on accelerating the utilization of the ZIBs for real-life applications. The final section highlights the outlook on research in this flourishing field.
Collapse
Affiliation(s)
- Nilesh R Chodankar
- Mechanical Engineering Department, Khalifa University, Abu Dhabi, 127788, United Arab Emirates
| | - Pragati A Shinde
- International Center for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, 305-0044, Japan
| | - Swati J Patil
- Department of Biochemistry and Biophysics, Texas A&M University, 300 Olsen Boulevard, College Station, TX-77843, United States
| | - Ganji Seeta Rama Raju
- Department of Energy and Material Engineering, Dongguk University-Seoul, Seoul, 04620 (Republic of, Korea
| | - Seung-Kyu Hwang
- Department of Biological Engineering, Nano Bio High-Tech Materials Research Center, Inha University (Republic of, Korea
| | - Supriya J Marje
- Department of Energy and Material Engineering, Dongguk University-Seoul, Seoul, 04620 (Republic of, Korea
| | - Harshitha B Tyagaraj
- Department of Energy and Material Engineering, Dongguk University-Seoul, Seoul, 04620 (Republic of, Korea
| | - Ebrahim Al Hajri
- Mechanical Engineering Department, Khalifa University, Abu Dhabi, 127788, United Arab Emirates
| | - Amal Al Ghaferi
- Mechanical Engineering Department, Khalifa University, Abu Dhabi, 127788, United Arab Emirates
| | - Yun Suk Huh
- Department of Biological Engineering, Nano Bio High-Tech Materials Research Center, Inha University (Republic of, Korea
| | - Young-Kyu Han
- Department of Energy and Material Engineering, Dongguk University-Seoul, Seoul, 04620 (Republic of, Korea
| |
Collapse
|
9
|
Weng G, Yang X, Wang Z, Xu Y, Liu R. Hydrogel Electrolyte Enabled High-Performance Flexible Aqueous Zinc Ion Energy Storage Systems toward Wearable Electronics. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2303949. [PMID: 37530198 DOI: 10.1002/smll.202303949] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2023] [Revised: 07/14/2023] [Indexed: 08/03/2023]
Abstract
To cater to the swift advance of flexible wearable electronics, there is growing demand for flexible energy storage system (ESS). Aqueous zinc ion energy storage systems (AZIESSs), characterizing safety and low cost, are competitive candidates for flexible energy storage. Hydrogels, as quasi-solid substances, are the appropriate and burgeoning electrolytes that enable high-performance flexible AZIESSs. However, challenges still remain in designing suitable and comprehensive hydrogel electrolyte, which provides flexible AZIESSs with high reversibility and versatility. Hence, the application of hydrogel electrolyte-based AZIESSs in wearable electronics is restricted. A thorough review is required for hydrogel electrolyte design to pave the way for high-performance flexible AZIESSs. This review delves into the engineering of desirable hydrogel electrolytes for flexible AZIESSs from the perspective of electrolyte designers. Detailed descriptions of hydrogel electrolytes in basic characteristics, Zn anode, and cathode stabilization effects as well as their functional properties are provided. Moreover, the application of hydrogel electrolyte-based flexible AZIESSs in wearable electronics is discussed, expecting to accelerate their strides toward lives. Finally, the corresponding challenges and future development trends are also presented, with the hope of inspiring readers.
Collapse
Affiliation(s)
- Gao Weng
- Soochow Institute of Energy and Material Innovations, Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, College of Energy, Soochow University, Suzhou, 215006, P. R. China
- Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Xianzhong Yang
- Institute of Energy Materials Science (IEMS), University of Shanghai for Science and Technology, Shanghai, 200093, P. R. China
| | - Zhiqi Wang
- Soochow Institute of Energy and Material Innovations, Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, College of Energy, Soochow University, Suzhou, 215006, P. R. China
- Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Yan Xu
- Soochow Institute of Energy and Material Innovations, Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, College of Energy, Soochow University, Suzhou, 215006, P. R. China
- Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215006, P. R. China
| | - Ruiyuan Liu
- Soochow Institute of Energy and Material Innovations, Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province, College of Energy, Soochow University, Suzhou, 215006, P. R. China
- Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215006, P. R. China
| |
Collapse
|
10
|
Sadri B, Gao W. Fibrous wearable and implantable bioelectronics. APPLIED PHYSICS REVIEWS 2023; 10:031303. [PMID: 37576610 PMCID: PMC10364553 DOI: 10.1063/5.0152744] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/31/2023] [Accepted: 06/20/2023] [Indexed: 08/15/2023]
Abstract
Fibrous wearable and implantable devices have emerged as a promising technology, offering a range of new solutions for minimally invasive monitoring of human health. Compared to traditional biomedical devices, fibers offer a possibility for a modular design compatible with large-scale manufacturing and a plethora of advantages including mechanical compliance, breathability, and biocompatibility. The new generation of fibrous biomedical devices can revolutionize easy-to-use and accessible health monitoring systems by serving as building blocks for most common wearables such as fabrics and clothes. Despite significant progress in the fabrication, materials, and application of fibrous biomedical devices, there is still a notable absence of a comprehensive and systematic review on the subject. This review paper provides an overview of recent advancements in the development of fibrous wearable and implantable electronics. We categorized these advancements into three main areas: manufacturing processes, platforms, and applications, outlining their respective merits and limitations. The paper concludes by discussing the outlook and challenges that lie ahead for fiber bioelectronics, providing a holistic view of its current stage of development.
Collapse
Affiliation(s)
- Behnam Sadri
- Andrew and Peggy Cherng Department of Medical Engineering, Division of Engineering and Applied Science, California Institute of Technology; Pasadena, California 91125, USA
| | - Wei Gao
- Andrew and Peggy Cherng Department of Medical Engineering, Division of Engineering and Applied Science, California Institute of Technology; Pasadena, California 91125, USA
| |
Collapse
|
11
|
Lu H, Hu J, Zhang Y, Zhang K, Yan X, Li H, Li J, Li Y, Zhao J, Xu B. 3D Cold-Trap Environment Printing for Long-Cycle Aqueous Zn-Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209886. [PMID: 36515180 DOI: 10.1002/adma.202209886] [Citation(s) in RCA: 12] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 12/04/2022] [Indexed: 06/17/2023]
Abstract
Zn powder (Zn-P)-based anodes are always regarded as ideal anode candidates for zinc ion batteries owing to their low cost and ease of processing. However, the intrinsic negative properties of Zn-P-based anodes such as easy corrosion and uncontrolled dendrite growth have limited their further applications. Herein, a novel 3D cold-trap environment printing (3DCEP) technology is proposed to achieve the MXene and Zn-P (3DCEP-MXene/Zn-P) anode with highly ordered arrangement. Benefitting from the unique inhibition mechanism of high lattice matching and physical confinement effects within the 3DCEP-MXene/Zn-P anode, it can effectively homogenize the Zn2+ flux and alleviate the Zn deposition rate of the 3DCEP-MXene/Zn-P anode during Zn plating-stripping. Consequently, the 3DCEP-MXene/Zn-P anode exhibits a superior cycling lifespan of 1400 h with high coulombic efficiency of ≈9.2% in symmetric batteries. More encouragingly, paired with MXene and Co doped MnHCF cathode via 3D cold-trap environment printing (3 DCEP-MXene/Co-MnHCF), the 3DCEP-MXene/Zn-P//3DCEP-MXene/Co-MnHCF full battery delivers high cyclic durability with the capacity retention of 95.7% after 1600 cycles. This study brings an inspired universal pathway to rapidly fabricate a reversible Zn anode with highly ordered arrangement in a cold environment for micro-zinc storage systems.
Collapse
Affiliation(s)
- Hongyu Lu
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
| | - Jisong Hu
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
- School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China
| | - Yan Zhang
- Key Laboratory of Functional Polymer Materials and State Key Laboratory of Medicinal Chemical Biology, Institute of Polymer Chemistry, College of Chemistry, Nankai University, Tianjin, 300071, P. R. China
| | - Kaiqi Zhang
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Xiaoying Yan
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Heqi Li
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Jianzhu Li
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
| | - Yujie Li
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China
- School of Materials Science and Engineering, Harbin Institute of Technology (Weihai), Weihai, 264209, P. R. China
| | - Jingxin Zhao
- Nanotechnology Center, School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, P. R. China
| | - Bingang Xu
- Nanotechnology Center, School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, P. R. China
| |
Collapse
|
12
|
Zhang Y, Zhou J, Zhang Y, Zhang D, Yong KT, Xiong J. Elastic Fibers/Fabrics for Wearables and Bioelectronics. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2203808. [PMID: 36253094 PMCID: PMC9762321 DOI: 10.1002/advs.202203808] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/02/2022] [Revised: 09/01/2022] [Indexed: 06/16/2023]
Abstract
Wearables and bioelectronics rely on breathable interface devices with bioaffinity, biocompatibility, and smart functionality for interactions between beings and things and the surrounding environment. Elastic fibers/fabrics with mechanical adaptivity to various deformations and complex substrates, are promising to act as fillers, carriers, substrates, dressings, and scaffolds in the construction of biointerfaces for the human body, skins, organs, and plants, realizing functions such as energy exchange, sensing, perception, augmented virtuality, health monitoring, disease diagnosis, and intervention therapy. This review summarizes and highlights the latest breakthroughs of elastic fibers/fabrics for wearables and bioelectronics, aiming to offer insights into elasticity mechanisms, production methods, and electrical components integration strategies with fibers/fabrics, presenting a profile of elastic fibers/fabrics for energy management, sensors, e-skins, thermal management, personal protection, wound healing, biosensing, and drug delivery. The trans-disciplinary application of elastic fibers/fabrics from wearables to biomedicine provides important inspiration for technology transplantation and function integration to adapt different application systems. As a discussion platform, here the main challenges and possible solutions in the field are proposed, hopefully can provide guidance for promoting the development of elastic e-textiles in consideration of the trade-off between mechanical/electrical performance, industrial-scale production, diverse environmental adaptivity, and multiscenario on-spot applications.
Collapse
Affiliation(s)
- Yufan Zhang
- Innovation Center for Textile Science and TechnologyDonghua UniversityShanghai201620China
| | - Jiahui Zhou
- College of Textile and Clothing EngineeringSoochow UniversitySuzhou215123China
| | - Yue Zhang
- College of Textile and Clothing EngineeringSoochow UniversitySuzhou215123China
| | - Desuo Zhang
- College of Textile and Clothing EngineeringSoochow UniversitySuzhou215123China
| | - Ken Tye Yong
- School of Biomedical EngineeringThe University of SydneySydneyNew South Wales2006Australia
| | - Jiaqing Xiong
- Innovation Center for Textile Science and TechnologyDonghua UniversityShanghai201620China
| |
Collapse
|