Precisely Constructed Metal Sulfides with Localized Single-Atom Rhodium for Photocatalytic C-H Activation and Direct Methanol Coupling to Ethylene Glycol

p-Type TiO2 Nanotubes: Quantum Confinement and Pt Single Atom Decoration Enable High Selectivity Photocatalytic Nitrate Reduction to Ammonia

We synthesize p-type TiO2 nanotubes that allow band-gap adjustment by quantum confinement. These tubes therefore enable reductive photocatalytic reactions that are not thermodynamically possible on classic titania photocatalysts. Here, we demonstrate the direct photocatalytic nitrate reduction to ammonia without any need of hole scavengers. The quantum confinement effect (and thus the thermodynamic driving force) can be controlled by the thickness of the nanotube walls. Notably, the use of Pt single atoms as cocatalysts decorated on the TiO2 nanotubes additionally offers a superior ammonia production and a remarkable enhanced selectivity compared to Pt nanoparticles. Overall, the work not only highlights the potential of size-controlled modifications of electronic properties in extending the utility of a most classical photocatalyst but also exemplifies its use in technologically relevant reactions.

Photocatalytic Coproduction of Diesel Fuel Precursors and H2 Promoted by [HSO4 -] and Water

Photocatalytic CC coupling of 2,5-dimethylfuran (DMF) derived from processing lignocellulosic biomasses coproduces drop-in fuels and green hydrogen with a low-carbon footprint. However, the high reaction barrier for CH bond breaking and uphill overall reaction lead to the slow kinetics of DMF coupling. Here, we reveal that [HSO4 -] and water can collaboratively promote the rate-limiting step of the CH bond breaking on the Ru-ZnIn2S4 catalyst. An in-depth study suggests that water mediates hole transfer to the CH bond while [HSO4 -] facilitates electron extraction, thus promoting electron and proton transfer on the Ru-ZnIn2S4 surface. Consequently, photocatalytic DMF coupling over Ru-ZnIn2S4 produces diesel fuel precursors (DFPs) and H2 with benchmarking formation rates of 1.5 g gcatal. -1 h-1 and 9.7 mmol gcatal. -1 h-1, respectively. Moreover, the selectivity of branched-chain DFPs reaches 55%. This work puts forward new insight and strategy for photocatalytic CC coupling for the synthesis of biofuels.

Effective Hole Utilization for Atomically Dispersed Low-Coordination Molybdenum Accelerating Photocatalytic C─H Activation

Photocatalytic acceptorless dehydrogenation of alcohols offers a promising strategy to produce the corresponding carbonyl compounds and clean fuel H2. However, the sluggish kinetics of the alkoxy C─H bond cleavage attributes to the inefficient utilization of photogenerated holes greatly restricts the photocatalytic activity. Here we develmically dispersed low-coordination Mo on ultrathin ZnIn2S4 nanosheets that can greatly accelerate photocatalytic C─H activation. An internal quantum efficiency of 45.2% at 400 nm together with 99% benzaldehyde (BAD) selectivity is achieved using benzyl alcohol (BA) as a model substrate. Extensive experimental characterizations and theoretical calculations reveal that the low-coordination Mo tunes the local atomic configuration of highest occupied molecular orbital to trap holes produced under photoexcitation within picoseconds. Moreover, the incorporated site-specific Mo greatly improves the lifetime and diffusion length of photogenerated holes and optimizes the driving force of alkoxy C─H activation, which are responsible for the excellent performance. This work marks a significant stride to enhance the utilization efficiency of holes for promoting photocatalytic C─H activation.

Artificial Photosynthesis of Formamide via an Oxidant-Free Photoinduced Radical Coupling Route over Pt-CdS

Large-scale manufacturing of formamide is always involved with the use of carbon monoxide, hence developing a series of eco-friendly synthesis routes is of great significance. Alternative feedstock of low-cost methanol is expected to fulfill this breakthrough due to its green and renewable nature; however, the overoxidation of methanol severely inhibits the efficacious formamide synthesis from methanol and ammonia through the conventional catalytic route. Herein, we report the successful development of a direct radical coupling route for converting methanol and ammonia into high-selectivity formamide and hydrogen without extra oxidants under ambient conditions. The optimized Pt-CdS photocatalysts offered an impressive formamide production rate of 1.45 mmol g-1 h-1, as well as an exceptional hole selectivity reaching up to 63.5%. The oxidant-free radical mechanism of high-efficiency formamide generation as revealed by in situ characterizations (e.g., in situ electron paramagnetic resonance and in situ transient absorption spectroscopy), stems from the photogenerated holes oxidizing the methanol to hydroxymethyl radical for subsequently direct C─N coupling with amino radical. This work demonstrates an efficient oxidant-free photoinduced radical coupling strategy with the promise of an acceptable alternative to current technologies for artificial photosynthesis formamide using clean and abundant solar energy.

Photocatalytic synthesis of ethylene glycol and hydrogen from methyl tert-butyl ether

In this work, we have developed a green and sustainable strategy for the synthesis of ethylene glycol, which is a highly valuable compound in chemical industry. In contrast to the currently applied energy-intensive process based on petroleum resources, this work demonstrates the photocatalytic pathway of methanol dehydrogenative coupling to produce ethylene glycol, utilizing methyl tert-butyl ether as the substrate to protect the hydroxyl group against oxidation. Photocatalytic tests reveal efficient C-C coupling of methyl tert-butyl ether with Pt/C-TiO(B)-650 catalyst under light irradiation, with the target product 1,2-di-tert-butoxyethane at a selectivity of 67% and a Pt-based turnover frequency of 2754 h-1. Scale up test demonstrates high stability of the system, reaching an accumulated turnover number of 120 000 as well as isolation of 13 g of the coupling product after 130 h irradiation. The target ethylene glycol is obtained by the hydrolysis of the dimer using the regenerable acidic resin catalyst.

Ultrathin Ti-Deficient TiO2 Nanosheets with Pt Single Atoms Enable Efficient Photocatalytic Nitrate Reduction to Ammonia

Ti-deficient TiO2 nanosheets derived from lepidocrocite-type titanate delamination show a p-type conductivity with a band gap widened by the quantum confinement effect to 3.7 eV. This shift in the extended band positions─and thus in the electron transfer level─allows a direct photocatalytic nitrate reduction to ammonia without the use of any hole scavengers; this in contrast to classic TiO2. The deposition of Pt single atoms as cocatalysts onto the nanosheets significantly enhances the activity and selectivity toward ammonia, which outperforms classic Pt nanoparticles used as cocatalyst. The present study therefore reports not only on the unique photocatalytic properties of these Ti-deficient TiO2 nanosheets but also on the beneficial use of the modified electronic properties that enable entirely novel applications, such as the technologically highly important reduction of nitrate to ammonia.

Photocatalytic Methanol Dehydrogenation with Switchable Selectivity

Switchable selectivity achieved by altering reaction conditions within the same photocatalytic system offers great advantages for sustainable chemical transformations and renewable energy conversion. In this study, we investigate an efficient photocatalytic methanol dehydrogenation with controlled selectivity by varying the concentration of nickel cocatalyst, using zinc indium sulfide nanocrystals as a semiconductor photocatalyst, which enables the production of either formaldehyde or ethylene glycol with high selectivity. Control experiments revealed that formaldehyde is initially generated and can either serve as a terminal product or intermediate in producing ethylene glycol, depending on the nickel concentration in the solution. Mechanistic studies suggest a unique role of ionic nickel as an additional photoelectron competitor that can significantly influence selectivity, alongside its well-established function as a hydrogen evolution reaction cocatalyst under photocatalytic conditions. The demonstrated switchable selectivity provides a new tool for producing diverse products from methanol, while advancing the understanding of cocatalyst behavior for versatile catalytic performance.

Photocatalytic Synthesis of Glycine from Methanol and Nitrate

Photocatalytic utilization of methanol and nitrate as carbon and nitrogen sources for the direct synthesis of amino acids could provide a sustainable way for the valorization of green "liquid sunlight" and nitrate waste. In this study, we develop an efficient photochemical method to synthesize glycine directly from methanol and nitrate, which cascades the C-C coupling to form glycol, nitrate reduction to NH3, and finally C-N coupling to generate glycine. Interestingly, the involved photocatalytic tandem reactions show a synergistic effect, in which the presence of nitrate is the dominant factor to enable the overall reaction and reach high synthetic efficiency. Ba2+-TiO2 nanoparticles are confirmed as a feasible and efficient catalyst system for the photosynthesis of glycine with a remarkable glycine photosynthesis rate of 870 μmol gcat -1 h-1 under optimal conditions. This work establishes a novel catalytic system for amino acid synthesis from methanol and nitrate under mild conditions. These results also allow us to further suppose the formation pathways of amino acids on the primitive earth, as an extension to proposals based on the Miller-Urey experiments.

Mixed Crystalline Covalent Heptazine Frameworks with Built-in Heterojunction Structures towards Efficient Photocatalytic Formic Acid Dehydrogenation

Covalent heptazine frameworks (CHFs) are widely utilized in the recent years as potential photocatalysts. However, their limited conjugated structures, low crystallinity and small surface areas have restricted the practical photocatalysis performance. Along this line, we report herein the synthesis of a kind of mixed crystalline CHF (m-CHF-1) with built-in heterojunction structure, which can efficiently catalyze the formic acid dehydrogenation by visible light driven photocatalysis. The m-CHF-1 is synthesized from 2,5,8-triamino-heptazine and dicyanobenzene (DCB) in the molten salts, in which DCB plays as organic molten co-solvent to promote the rapid and ordered polymerization of 2,5,8-triamino-heptazine. The m-CHF-1 is formed by embedding phenyl-linked heptazine (CHF-Ph) units in the poly(heptazine imide) (PHI) network similar to doping. The CHF-Ph combined with PHI form an effective type II heterojunction structure, which promote the directional transfer of charge carriers. And the integration of CHF-Ph makes m-CHF-1 have smaller exciton binding energy than pure PHI, the charge carriers are more easily dissociated to form free electrons, resulting in higher utilization efficiency of the carriers. The largest hydrogen evolution rate reaches a value of 42.86 mmol h-1 g-1 with a high apparent quantum yield of 24.6 % at 420 nm, which surpasses the majority of other organic photocatalysts.

Specific Photocatalytic C-C Coupling of Benzyl Alcohol to Deoxybenzoin or Benzoin by Precise Control of Cα-H Bond Activation or O-H Bond Activation by Adjusting the Adsorption Orientation of Hydrobenzoin Intermediates

Benzyl alcohol (BA) is a major biomass derivative and can be further converted into deoxybenzoin (DOB) and benzoin (BZ) as high-value products for industrial applications through photocatalytic C-C coupling reaction. The photocatalytic process contains two reaction steps, which are (1) the C-C coupling of BA to hydrobenzoin (HB) intermediates and (2) either dehydration of HB to DOB or dehydrogenation of HB to BZ. We found that generation of DOB or BZ is mainly determined by the activation of Cα-H or O-H bonds in HB. In this study, phase junction CdS photocatalysts and Ni/CdS photocatalysts were elaborately designed to precisely control the activation of Cα-H or O-H bonds in HB by adjusting the adsorption orientation of HB on the photocatalyst surfaces. After orienting the Cα-H groups in HB on the CdS surfaces, the Cα-H bond dissociation energy (BDE) at 1.39 eV is lower than the BDE of the O-H bond at 2.69 eV, therefore improving the selectivity of the DOB. Conversely, on Ni/CdS photocatalysts, the O-H groups in HB orient toward the photocatalyst surfaces. The BDE of the O-H bonds is 1.11 eV to form BZ, which is lower than the BDE of the Cα-H bonds to the DOB (1.33 eV), thereby enhancing the selectivity of BZ. As a result, CdS photocatalysts can achieve complete conversion of BA to 80.4% of the DOB after 9 h of visible light irradiation, while 0.3% Ni/CdS photocatalysts promote complete conversion of BA to 81.5% of BZ after only 5 h. This work provides a promising strategy in selective conversion of BA to either DOB or BZ through delicate design of photocatalysts.

Recent Advances and Insights in Designing ZnxCd1-xS-Based Photocatalysts for Hydrogen Production and Synergistic Selective Oxidation to Value-Added Chemical Production

Combining the hydrogen (H2) extraction process and organic oxidation synthesis in photooxidation-reduction reactions mediated by semiconductors is a desirable strategy because rich chemicals are evolved as byproducts along with hydrogen in trifling conditions upon irradiation, which is the only effort. The bifunctional photocatalytic strategy facilitates the feasible formation of a C═O/C─C bond from a large number of compounds containing a X-H (X = C, O) bond; therefore, the production of H2 can be easily realized without support from third agents like chemical substances, thus providing an eco-friendly and appealing organic synthesis strategy. Among the widely studied semiconductor nanomaterials, ZnxCd1-xS has been continuously studied and explored by researchers over the years, and it has attracted much consideration owing to its unique advantages such as adjustable band edge position, rich elemental composition, excellent photoelectric properties, and ability to respond to visible light. Therefore, nanostructures based on ZnxCd1-xS have been widely studied as a feasible way to efficiently prepare hydrogen energy and selectively oxidize it into high-value fine chemicals. In this Review, first, the crystal and energy band structures of ZnxCd1-xS, the model of twin nanocrystals, the photogenerated charge separation mechanism of the ZB-WZ-ZB homojunction with crisscross bands, and the Volmer-Weber growth mechanism of ZnxCd1-xS are described. Second, the morphology, structure, modification, synthesis, and vacancy engineering of ZnxCd1-xS are surveyed, summarized, and discussed. Then, the research progress in ZnxCd1-xS-based photocatalysis in photocatalytic hydrogen extraction (PHE) technology, the mechanism of PHE, organic substance (benzyl alcohol, methanol, etc.) dehydrogenation, the factors affecting the efficiency of photocatalytic discerning oxidation of organic derivatives, and selective C-H activation and C-C coupling for synergistic efficient dehydrogenation of photocatalysts are described. Conclusively, the challenges in the applicability of ZnxCd1-xS-based photocatalysts are addressed for further research development along this line.

Photocatalytic dihydroxylation of light olefins to glycols by water

Aliphatic diols such as ethylene and propylene glycol are the key products in the chemical industry for manufacturing polymers. The synthesis of these molecules usually implies sequential processes, including epoxidation of olefins using hydrogen peroxide or oxygen with subsequent hydrolysis to glycols. Direct hydroxylation of olefins by cheap and green oxidants is an economically attractive and environmentally friendly route for the synthesis of diols. Here, we report a photocatalytic reaction for the dihydroxylation of ethylene and propylene to their glycols at room temperature using water as the oxidant. The photocatalyst contains Pd clusters stabilized by sub-nanometric polyoxometalate with TiO2 as the host material. Under light irradiation, it results in production rates of ethylene glycol and propylene glycols of 146.8 mmol·gPd-1·h-1 and 28.6 mmol·gPd-1·h-1 with liquid-phase selectivities of 63.3 % and 80.0 %, respectively. Meanwhile, green hydrogen derived from water is produced as another valuable product. Combined spectroscopy investigation suggests that the reaction proceeds via π-bonded adsorption of olefins over Pd clusters with hydroxylation by hydroxyl radicals formed by photocatalytic dissociation of water.

All-in-One: Plasmonic Janus Heterostructures for Efficient Cooperative Photoredox Catalysis

Janus heterostructures consisting of multiple jointed components with distinct properties have gained growing interest in the photoredox catalytic field. Herein, we have developed a facile low-temperature method to gain anisotropic one-dimensional Au-tipped CdS (Au-CdS) nanorods (NRs), followed by assembling Ru molecular co-catalyst (RuN5) onto the surface of the NRs. The CdS NRs decorated with plasmonic Au nanoparticles and RuN5 complex harness the virtues of metal-semiconductor and inorganic-organic interface, giving directional charge transfer channels, spatially separated reaction sites, and enhanced local electric field distribution. As a result, the Au-CdS-RuN5 can act as an efficient dual-function photocatalyst for simultaneous H2 evolution and valorization of biomass-derived alcohols. Benefiting from the interfacial charge decoupling and selective chemical bond activation, the optimal all-in-one Au-CdS-RuN5 heterostructure shows greatly enhanced photoactivity and selectivity as compared to bare CdS NRs, along with a remarkable apparent quantum yield of 40.2 % at 400 nm. The structural evolution and working mechanism of the heterostructures are systematically analyzed based on experimental and computational results.

Accelerating Toluene Oxidation over Boron-Titanium-Oxygen Interface: Steric Hindrance of the Methyl Group Induced by the Plane-Adsorption Configuration

Elimination of dilute gaseous toluene is one of the critical concerns within the field of indoor air remediation. The typical degradation route on titanium-based catalysts, "toluene-benzaldehyde-carbon dioxide", necessitates the oxidation of the methyl group as a prerequisite for photocatalytic toluene oxidation. However, the inherent planar adsorption configuration of toluene molecules, dominated by the benzene rings, leads to significant steric hindrance for the methyl group. This steric hindrance prevents the methyl group from contacting the active species on the catalyst surface, thereby limiting the removal of toluene under indoor conditions. To date, no effective strategy to control the steric hindrance of the methyl group has been identified. Herein, we showed a B-Ti-O interface that exhibits significantly enhanced toluene removal efficiency under indoor conditions. In-depth investigations revealed that, compared to typical Ti-based photocatalysts, the steric hindrance between the methyl group and the catalyst surface decreased from 3.42 to 3.03 Å on the designed interface. This reduction originates from the matching of orbital energy levels between Ti 3dz2 and C 2pz of the benzene ring. The decreased steric hindrance improved the efficiency of toluene being attacked by surface active species, allowing for rapid conversion into benzaldehyde and benzoic acid species for subsequent reactions. Our work provides novel insights into the steric hindrance effect in the elimination of aromatic volatile organic compounds.

Selectivity switch via tuning surface static electric field in photocatalytic alcohol conversion

Photocatalysis has shown great potential in organic reactions, while controlling the selectivity is a long-standing goal and challenge due to the involvement of various radical intermediates. In this study, we have realized selectivity control in the photocatalytic conversion of alcohols via engineering the surface static electric field of the CdS semiconductor. By leveraging the Au-CdS interaction to adjust lattice strain, which influences the intensity of the surface static electric field, we altered the pathways of alcohol conversion. The increased intensity of the surface static electric field changed the activation pathways of the C-H/O-H bond, leading to the selective formation of targeted C/O-based radical intermediates and altering the selectivity from aldehydes to dimers. A wide range of alcohols, such as aromatic alcohol and thiophenol alcohol, were selectively converted into aldehyde or dimer. This work provides an effective strategy for selectively controlling reaction pathways by generating a surface electric field.

Full-Space Electric Field in Mo-Decorated Zn2In2S5 Polarization Photocatalyst for Oriented Charge Flow and Efficient Hydrogen Production

Integration of photocatalytic hydrogen (H2) evolution with oxidative organic synthesis presents a highly attractive strategy for the simultaneous production of clean H2 fuel and high-value chemicals. However, the sluggish dynamics of photogenerated charge carriers across the photocatalysts result in low photoconversion efficiency, hindering the wide applications of such a technology. Herein, this work overcomes this limitation by inducing the full-space electric field via charge polarization engineering on a Mo cluster-decorated Zn2In2S5 (Mo-Zn2In2S5) photocatalyst. Specifically, this full-space electric field arises from a cascade of the bulk electric field (BEF) and local surface electric field (LSEF), triggering the oriented migration of photogenerated electrons from [Zn-S] regions to [In-S] regions and eventually to Mo cluster sites, ensuring efficient separation of bulk and surface charge carriers. Moreover, the surface Mo clusters induce a tip enhancement effect to optimize charge transfer behavior by augmenting electrons and proton concentration around the active sites on the basal plane of Zn2In2S5. Notably, the optimized Mo1.5-Zn2In2S5 catalyst achieves exceptional H2 and benzaldehyde production rates of 34.35 and 45.31 mmol gcat -1 h-1, respectively, outperforming pristine ZnIn2S4 by 3.83- and 4.15-fold. These findings mark a significant stride in steering charge flow for enhanced photocatalytic performance.

Forked Vein Structure W/WO3- x with Dual Active Sites in W and Oxygen Vacancies to Enhance Methylene Self-Coupling for Efficient Conversion of Methane to Ethylene

The directional conversion of methane to ethylene is challenging due to the dissociation of the C─H bond and the self-coupling of methyl intermediates. Herein, a novel W/WO3- x catalyst with the fork vein structure consisting of an alternating arrangement of WO3- x and W is developed. Impressively, the catalyst achieves an unprecedented C2H4 yield of 1822.73 µmol g-1 h-1, with a selectivity of 82.49%. The enhanced catalytic activity is ascribed to the multifunctional synergistic effect induced by oxygen vacancies and W sites in W/WO3- x. Oxygen vacancies provide abundant coordination of unsaturation sites, which promotes the adsorption and activation of CH4, thus reducing the dissociation energy barrier of the C─H bond. The CH2 coupling barrier on the metal W surface is significantly lower compared to WO3, so CH2 can migrate to the W site for coupling. Importantly, the W/WO3- x with high periodicity provides multiple ordered local microelectric fields, and CH2 intermediates with dipole moments undergo orientation polarization and displacement polarization driven by the electric field, thus enabling CH2 migration. This work opens a new avenue for the structural design and modulation of photocatalysts, and provides new perspectives on the migration of methylene between multiple active sites.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Oxygen-Activated Boron Nitride for Selective Photocatalytic Coupling of Methanol to Ethylene Glycol

The controllable photocatalytic C-C coupling of methanol to produce ethylene glycol (EG) is a highly desirable but challenging objective for replacing the current energy-intensive thermocatalytic process. Here, we develop a metal-free porous boron nitride catalyst that demonstrates exceptional selectivity in the photocatalytic production of EG from methanol under mild conditions. Comprehensive experiments and calculations are conducted to thoroughly investigate the reaction mechanism, revealing that the OB3 unit in the porous BN plays a critical role in the preferential activation of C-H bond in methanol to form ⋅CH2OH via a concerted proton-electron transfer mechanism. More prominent energy barriers are observed for the further dehydrogenation of the ⋅CH2OH intermediate on the OB3 unit, inhibiting the formation of some other by-products during the catalytic process. Additionally, a small downhill energy barrier for the coupling of ⋅CH2OH in the OB3 unit promotes the selective generation of EG. This study provides valuable insights into the underlying mechanisms and can serve as a guide for the design and optimization of photocatalysts for efficient and selective EG production under mild conditions.

Heterogeneous Photocatalytic Strategies for C(sp3 )-H Activation

Activation of ubiquitous C(sp3 )-H bonds is extremely attractive but remains a great challenge. Heterogeneous photocatalysis offers a promising and sustainable approach for C(sp3 )-H activation and has been fast developing in the past decade. This Minireview focuses on mechanism and strategies for heterogeneous photocatalytic C(sp3 )-H activation. After introducing mechanistic insights, heterogeneous photocatalytic strategies for C(sp3 )-H activation including precise design of active sites, regulation of reactive radical species, improving charge separation and reactor innovations are discussed. In addition, recent advances in C(sp3 )-H activation of hydrocarbons, alcohols, ethers, amines and amides by heterogeneous photocatalysis are summarized. Lastly, challenges and opportunities are outlined to encourage more efforts for the development of this exciting and promising field.

Direct Photoreforming of Real-World Polylactic Acid Plastics into Highly Selective Value-Added Pyruvic Acid under Visible Light

Although polylactic acid (PLA) represents a pivotal biodegradable polymer, its biodegradability has inadvertently overshadowed the development of effective recycling techniques, leading to the potential wastage of carbon resources. The photoreforming-recycling approach for PLA exhibits significant potential in terms of concepts and methods. However, the reaction faces enormous challenges due to the limited selectivity of organic oxidation products as well as the increased costs and challenging separation of organic products associated with alkali-solution-assisted prehydrolysis. Herein, we report an alkali-free direct-photoreforming pathway for real-world PLA plastics utilizing the Pd-CdS photocatalyst under visible-light illumination, obviating the need for chemical pretreatment of PLA. The devised pathway successfully produces H2 at a rate of 49.8 μmol gcat.-1 h-1, sustained over 100 h, and exhibits remarkable selectivity toward pyruvic acid (95.9% in liquid products). Additionally, experimental findings elucidate that Pd sites not only function as a typical cocatalyst for enhancing the photocatalytic evolution of H2 but also suppress competitive side reactions (e.g., lactic acid coupling or decarboxylation), consequently augmenting the yield and selectivity of pyruvic acid and H2. This investigation provides a straightforward and sustainable direct-photoreforming route capable of simultaneously mitigating and repurposing plastic waste into valuable chemicals, thus offering a promising solution to the current environmental challenges.

Recent progress of heterogeneous catalysts for transfer hydrogenation under the background of carbon neutrality

Under the background of carbon neutrality, the direct conversion of greenhouse CO2 to high value added fuels and chemicals is becoming an important and promising technology. Among them, the generation of liquid C1 products (formic acid and methanol) has made great progress; nevertheless, it encounters the problem of how to use it efficiently to solve the overcapacity issue. In this review, we suggest that the catalytic transfer hydrogenation using formic acid and methanol as the hydrogen sources is a critical and potential route for the substitution for the fossil fuel-derived H2 to generate essential bulk and fine chemicals. We mainly focus on summarizing the recent progress of heterogeneous catalysts in such reactions, including thermal- and photo-catalytic processes. Finally, we also propose some challenges and opportunities for this development.

Realizing Unassisted Photo-Charging of Zinc-Air Batteries by Anisotropic Charge Separation in Photoelectrodes

Solar rechargeable zinc-air battery is a promising approach for capturing and storing intermittent solar energy through photoelectrochemical reactions. However, unassisted photo-charging of zinc-air batteries is challenging due to suboptimal carrier accumulation on photoelectrodes, resulting in sluggish reaction kinetics. Here, unassisted photo-charging of zinc-air battery is achieved by investigating anisotropic photogenerated charge separation on a series of representative semiconductors (ZnIn2 S4 , TiO2 , and In2 O3 ), among which the exceptional anisotropic charge separation on a ZnIn2 S4 photoelectrode is revealed based on anisotropic charge diffusion capabilities. The charge separation is facet-dependent, which is observed using Kelvin probe force microscopy, verifying a cause-and-effect relationship between the photo-charge accumulation on photoelectrodes and their photo-charging performance in zinc-air batteries. This work achieves an unassisted photo-charging current density of 1.9 mA cm-2 with a light-to-chemical energy conversion efficiency of 1.45%, highlighting the importance of anisotropic semiconductors for unassisted photo-charging of zinc-air batteries via efficient photogenerated charge separation.