Pushing the Limit of Open-Circuit Voltage Deficit via Modifying Buried Interface in CsPbI3 Perovskite Solar Cells

Decoding recombination dynamics in perovskite solar cells: an in-depth critical review

The remarkable optoelectronic properties of metal halide perovskites (MHPs) have established them as highly promising photovoltaic absorber materials, propelling the rapid advancement of perovskite solar cells (PSCs) that outperform many traditional alternatives in terms of power conversion efficiency (PCE). However, despite their advancements, PSC devices encounter significant non-radiative recombination losses, encompassing trap-assisted (Shockley-Read-Hall) recombination in bulk and interfaces of PSCs, which restricts their open-circuit voltage (VOC) and overall PCE, dragging it below the Shockley-Queisser (SQ) limit. The ongoing debate regarding the role of grain boundary (GB) recombination, whether it primarily manifests as bulk or surface recombination, has spurred extensive research aimed at elucidating these mechanisms. This review provides a critical comprehensive analysis of the thermodynamic correlations related to VOC losses, bridging the gap between the theoretical SQ limit and practical device performance. Subsequently, it delves into recent findings that aim to decipher the multifaced nature and origin of radiative and non-radiative recombination-induced losses within the device stack, assessing their impacts on overall performance. Furthermore, this review emphasizes the application of advanced machine learning techniques to discern dominant recombination mechanisms in PSCs. Finally, it summarizes the notable advanced strategies to mitigate undesirable non-radiative recombination losses, which pave the way to the thermodynamic efficiency limit.

Two-Dimensional Surface Passivation with Distinct Cations Enabling High Efficiency and Mechanical Durability in Flexible Perovskite Solar Cells

Recent advancements in flexible perovskite solar cells (f-PSCs) have significantly improved power conversion efficiency (PCE) and mechanical durability, particularly when using a polyethylene naphthalate (PEN) substrate. Herein, the effects of 2D organic surface treatments-including phenylethylammonium iodide (PEAI), 5-ammonium valeric acid iodide (5-AVAI), and butylammonium iodide (BAI)-on the photovoltaic performance and mechanical properties of f-PSCs are investigated. The findings reveal that radiative voltage losses near the band edge are minimal for 2D-BAI (0.032 V) and 2D-PEAI (0.027 V) but significantly higher for 2D-5AVAI (0.136 V). After 2D-BAI treatment, the average Young's modulus increases to 0.48 GPa, reaching a maximum of 2 GPa, reinforcing the mechanical resilience of the perovskite layer. Consequently, 2D-BAI-treated f-PSCs achieve a PCE of 19.81% while maintaining structural integrity after 10,000 bending cycles. This study underscores the effectiveness of 2D treatments in simultaneously enhancing both device efficiency and durability, offering valuable insights for the development of robust and flexible electronic devices.

Synergistic Interfacial Dipole and π-Conjugation Effects Enable Efficient Tin Perovskite Solar Cells

Tin perovskites are considered promising candidates for realizing high-performance, lead-free perovskite solar cells (PSCs). Despite prominent progress made through bulk optimization, unsatisfactory interfaces between tin perovskite and charge transport layers are critical obstacles to boosting device performance. Herein, we address this issue by introducing piperazine dihydroiodide (PDI) and ferrocene (Fc) at the interface of tin perovskite/C60 to synergistically improve the interfacial charge transport. Specifically, PD+ interacts with formamidinium ions (FA+) to form an interfacial dipole, and Fc establishes π-π conjugation with C60. These effects significantly improve electron extraction at the tin perovskite/C60 interface and reduce energy losses. As a result, the efficiency of tin PSCs is remarkably improved from 10.62% to 13.65%, accompanied by enhanced stability. This work highlights the importance of interfacial modulation in tin PSCs toward realizing efficient and eco-friendly perovskite photovoltaics.

Synchronous Perovskite Crystallization Regulation and Buried Interface Modification Improve the Stability and Efficiency of a Planar Inorganic Perovskite Solar Cell

The numerous defects in inorganic perovskites and inferior buried interfaces result in serious nonradiative recombination and energy loss, exacerbating the deterioration of the performance of inorganic perovskite solar cells. Here, we develop a facile strategy to simultaneously improve CsPbIBr2 perovskite quality by regulating perovskite crystallization and modify the buried interface by forming a 6-aminonicotinic acid (6AA) molecular interlayer through adding 6AA into a CsPbIBr2 precursor solution. It is found that adding 6AA into the CsPbIBr2 precursor effectively regulates the crystallization process of CsPbIBr2 perovskite because 6AA molecules exhibit a strong intermolecular interaction with CsPbIBr2 precursor components, resulting in forming a compact CsPbIBr2 perovskite film with improved morphology and decreased defects. Meanwhile, 6AA molecules are pushed downward during the perovskite crystallization process and accumulate at the buried interface to form the 6AA interlayer, which improves the interface contact and enhances the charge transport at the buried interface. The perovskite quality improvement and the buried interface modification effectively decrease the nonradiative recombination and interface charge loss. Consequently, the fabricated planar carbon-based CsPbIBr2 solar cell demonstrates an efficiency of 10.97% with a remarkably promoted long-term stability.

Powering the Future: Opportunities and Obstacles in Lead-Halide Inorganic Perovskite Solar Cells

Efficiency, stability, and cost are crucial considerations in the development of photovoltaic technology for commercialization. Perovskite solar cells (PSCs) are a promising third-generation photovoltaic technology due to their high efficiency and low-cost potential. However, the stability of organohalide perovskites remains a significant challenge. Inorganic perovskites, based on CsPbX₃ (X = Br-/I-), have garnered attention for their excellent thermal stability and optoelectronic properties comparable to those of organohalide perovskites. Nevertheless, the development of inorganic perovskites faces several hurdles, including the need for high-temperature annealing to achieve the photoactive α-phase and their susceptibility to transitioning into the nonphotoactive δ-phase under environmental stressors, particularly moisture. These challenges impede the creation of high-efficiency, high-stability devices using low-cost, scalable manufacturing processes. This review provides a comprehensive background on the fundamental structural, physical, and optoelectronic properties of inorganic lead-halide perovskites. It discusses the latest advancements in fabricating inorganic PSCs at lower temperatures and under ambient conditions. Furthermore, it highlights the progress in state-of-the-art inorganic devices, particularly those manufactured in ambient environments and at reduced temperatures, alongside simultaneous advancements in the upscaling and stability of inorganic PSCs.

Regulating Bifacial Surface Potential of Perovskite Film Enables Efficient Perovskite Solar Cells Universal for Different Charge Transport Layers

Planar perovskite solar cells (PSCs) show huge promise as an efficient photovoltaic technology, where the inefficient carrier transport at the hetero-interface largely limits their performance advancement. Herein, bifacial surface potential regulation is realized in a monolithic perovskite film through interface doping, leading to optimized dual-interfacial energy level alignment. In a n-i-p planar device, the up-shift of Fermi level on the perovskite bottom surface is first achieved through bottom-up diffusion of Li+. Then, vitamin D2 is incorporated into the methoxy-Phenethylammonium iodide (MeO-PEAI) passivator, which can neutralize the up-shift of the Fermi level of perovskite top surface induced by MeO-PEAI passivation and further induce its down-shift. Both experimental measurements and theoretical simulation reveal that the bifacial surface potential regulation effectively promotes interfacial carrier transport and reduces carrier recombination, enhancing the adaptability of efficient PSCs to different charge transport materials. Impressively, the PSCs with 2,2',7,7'-Tetrakis [N, N-di(4-methoxyphenyl) amino]-9,9'-spirobifluorene (Spiro-OMeTAD) and 2,4,6-Trimethyl-N, N-diphenylaniline (PTAA) achieve efficiencies of 26.05% (certificated 25.80%) and 24.65%, respectively. Besides, the device can maintain 99% of its highest efficiency after aging more than 2200 h in ambient air with a relative humidity of ≈20%, showing excellent stability.

Buried Interface Modification Toward Efficient CsPbI2.2Br0.8 Based Monolithic Perovskite/Organic Tandem Solar Cells

Wide-bandgap perovskite sub-cells (WPSCs), one of the most crucial components of perovskite-based tandem solar cells (PTSCs), play a critical role in determining the performance of tandem devices. However, confined by the compromised crystallization properties of wide-bandgap perovskites, WPSCs exhibit significantly lower efficiency than their theoretical limit. In particular, for n-i-p structured all-inorganic WPSCs (AIWPSCs), severe nonradiative recombination due to the buried interface defects severely decreases the photovoltaic performance. Herein, an efficient propionate group (PA-) based ionic liquid, methylamine propionate (MAPA), is introduced into the perovskite/electron-transport layer (ETL) interface to passivate the buried interface of AIWPSCs. The intense interaction between the PA- and Pb-Pb dimer effectively heals the defects at the buried interface and facilitates a more homogeneous elemental distribution in the perovskite film. As a result, CsPbI2.2Br0.8-based AIWPSCs with a high power conversion efficiency (PCE) of 18.29% and open-circuit voltage (VOC) of 1.33 V are obtained, which illustrates the superiority of MAPA in optimizing the performance of AIWPSCs. Moreover, by integrating these AIWPSCs with small-bandgap organic solar cells (SOSCs), high performance n-i-p structured all-inorganic perovskite/organic tandem solar cells (AIPOTSCs) with a high PCE of 23.19% and VOC of 2.08 V are also achieved.

Specific Influences of Trap States with Distinct Spatial and Energetic Distributions on Ion Migration Dynamics in Metal Halide Perovskites

Trap state engineering has been widely employed to manipulate the dynamics of ion migration in metal halide perovskites (MHPs), a crucial factor associated with the performance and stability of MHP-based devices. However, the specific roles of different trap states remain poorly understood due to their complicated spatial and energetics distributions. Herein, we propose a methodology for independently regulating the distributions of bulk shallow and surface deep trap states in MHPs. By combining in situ photoluminescence spectroscopy with wide-field imaging microscopy, we elucidate the effect of surface trap states on promoting long-range interparticle ion migration. Interestingly, we ascertain with time-resolved photoelectric techniques that the majority of mobile ionic defects involved in ion migration are predominantly contributed by bulk trap states. Our findings suggest that targeted manipulation of bulk shallow and surface deep trap states can be effective in reducing the number of mobile ions and decelerating the rate of ion migration, respectively.

Over 21% Efficient Cesium Lead Triiodide Solar Cell Enabled by Molten Salt Accelerating the Crystallization Processes

High-quality CsPbI3 with low defect density is indispensable for acquiring excellent photoelectric performance. Meticulous regulation of the CsPbI3 crystal growth processes is both feasible and efficacious in enhancing the quality of perovskite films. In this study, the cesium formate (CsFo) is introduced. On one hand, its low melting point can induce the crystallization processes at a low level of energy consumption. On the other hand, the pseudo-halide anion can participate in the passivation of iodide vacancies, as the formate anion exhibits a relatively higher affinity with iodide vacancies compared to other halides. Consequently, the introduction of CsFo enhances the quality of CsPbI3 thin films by altering the crystallization process and curbing defect formation. As a result, a steady-state output efficiency of 21.23% and an open-circuit voltage (Voc) as high as 1.25 V are achieved, with both parameters ranking among the highest for this type of solar cell.

Multifunctional Modification of the Buried Interface in Mixed Tin-Lead Perovskite Solar Cells

Mixed tin-lead perovskite solar cells can reach band gaps as low as 1.2 eV, offering high theoretical efficiency and serving as base materials for all-perovskite tandem solar cells. However, instability and high defect densities at the interfaces, particularly the buried surface, have limited performance improvements. In this work, we present the modification of the bottom perovskite interface with multifunctional hydroxylamine salts. These salts can effectively coordinate the different perovskite components, having critical influences in regulating the crystallization process and passivating defects of varying nature. The surface modification reduced traps at the interface and prevented the formation of excessive lead iodide, enhancing the quality of the films. The modified devices presented fill factors reaching 81 % and efficiencies of up to 23.8 %. The unencapsulated modified devices maintained over 95 % of their initial efficiency after 2000 h of shelf storage.

Oxide Derivatives of Nb2CTx MXene and Their Application as Electron Transport Layers in Perovskite Solar Cells: Unraveling the Oxidation Process and Functionalization

In the realm of photovoltaic research, 2D transition metal carbides (MXenes) have gained significant interest due to their exceptional photoelectric capabilities. However, the instability of MXenes due to oxidation has a direct impact on their practical applications. In this work, the oxidation process of Nb2CTx MXene in aqueous systems is methodically simulated at the atomic level and nanosecond timescales, which elucidates the structural variations influenced by the synergistic effects of water and dissolved oxygen, predicting a transition from metal to semiconductor with 44% C atoms replaced by O atoms in Nb2CTx. Moreover, Nb2CTx with varying oxidation degrees is utilized as electron transport layers (ETLs) in perovskite solar cells (PSCs). Favorable energy level alignments with superior electron transfer capability are achieved by controlled oxidation. By further exploring the composites of Nb2CTx to its derivatives, the strong interaction of the nano-composites is demonstrated to be more effective for electron transport, thus the corresponding PSC achieves a better performance with long-term stability compared with the widely used ETLs like SnO2. This work unravels the oxidation dynamics of Nb2CTx and provides a promising approach to designing ETL by exploiting MXenes to their derivatives for photovoltaic technologies.

A Graded Redox Interfacial Modifier for High-Performance Perovskite Solar Cells

Perovskite solar cells have emerged as a potential competitor to the silicon photovoltaic technology. The most representative perovskite cells employ SnO2 and spiro-OMeTAD as the charge-transport materials. Despite their high efficiencies, perovskite cells with such a configuration show unsatisfactory lifespan, normally attributed to the instability of perovskites and spiro-OMeTAD. Limited attention was paid to the influence of SnO2, an inorganic material, on device stability. Here we show that improving SnO2 with a redox interfacial modifier, cobalt hexammine sulfamate, simultaneously enhances the power-conversion efficiency (PCE) and stability of the perovskite solar cells. Redox reactions between the bivalent cobalt complexes and oxygen lead to the formation of a graded distribution of trivalent and bivalent cobalt complexes across the surface and bulk regions of the SnO2. The trivalent cobalt complex at the top surface of SnO2 raises the concentration of (SO3NH2)- which passivates uncoordinated Pb2+ and relieves tensile stress, facilitating the formation of perovskite with improved crystallinity. Our approach enables perovskite cells with PCEs of up to 24.91 %. The devices retained 93.8 % of their initial PCEs after 1000 hours of continuous operation under maximum power point tracking. These findings showcase the potential of cobalt complexes as redox interfacial modifiers for high-performance perovskite photovoltaics.

Synergistic Buried Interface Regulation of Tin-Lead Perovskite Solar Cells via Co-Self-Assembled Monolayers

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) hold considerable potential for achieving efficiencies near the Shockley-Queisser (S-Q) limit. Notably, the inverted structure stands as the preferred fabrication method for the most efficient Sn-Pb PSCs. In this regard, it is imperative to implement a strategic customization of the hole selective layer to facilitate carrier extraction and refine the quality of perovskite films, which requires effective hole selectivity and favorable interactions with Sn-Pb perovskites. Herein, we propose the development of Co-Self-Assembled Monolayers (Co-SAM) by integrating both [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and glycine at the buried contacts. The one-step deposition process employed in the fabrication of the Co-SAM ensures uniform coverage, resulting in a homogeneous surface potential. This is attributed to the molecular interactions occurring between 2PACz and glycine in the processing solution. Furthermore, the amine (-NH2) and ammonium (-NH3+) groups in glycine effectively passivate Sn4+ defects at the buried interface of Sn-Pb perovskite films, even under thermal stress. Consequently, the synergistic buried interface regulation of Co-SAM leads to a power conversion efficiency (PCE) of 23.46%, which outperforms devices modified with 2PACz or glycine alone. The Co-SAM-modified Sn-Pb PSC demonstrates enhanced thermal stability, maintaining 88% of its initial PCE under 65 °C thermal stress for 590 h.

Bilateral Chemical Linking at NiOx Buried Interface Enables Efficient and Stable Inverted Perovskite Solar Cells and Modules

Inverted NiOx-based perovskite solar cells (PSCs) exhibit considerable potential because of their low-temperature processing and outstanding excellent stability, while is challenged by the carriers transfer at buried interface owing to the inherent low carrier mobility and abundant surface defects that directly deteriorates the overall device fill factor. Present work demonstrates a chemical linker with the capability of simultaneously grasping NiOx and perovskite crystals by forming a Ni-S-Pb bridge at buried interface to significantly boost the carriers transfer, based on a rationally selected molecule of 1,3-dimethyl-benzoimidazol-2-thione (NCS). The constructed buried interface not only reduces the pinholes and needle-like residual PbI2 at the buried interface, but also deepens the work function and valence band maximum positions of NiOx, resulting in a smaller VBM offset between NiOx and perovskite film. Consequently, the modulated PSCs achieved a high fill factor up to 86.24 %, which is as far as we know the highest value in records of NiOx-based inverted PSCs. The NCS custom-tailored PSCs and minimodules (active area of 18 cm2) exhibited a champion efficiency of 25.05 % and 21.16 %, respectively. The unencapsulated devices remains over 90 % of their initial efficiency at maximum power point under continuous illumination for 1700 hours.

Suppressed Defects by Functional Thermally Cross-Linked Fullerene for High-Efficiency Tin-Lead Perovskite Solar Cells

Mixed tin-lead (Sn-Pb) perovskites have attracted the attention of the community due to their narrow bandgap, ideal for photovoltaic applications, especially tandem solar cells. However, the oxidation and rapid crystallization of Sn2+ and the interfacial traps hinder their development. Here, cross-linkable [6,6]-phenyl-C61-butyric styryl dendron ester (C-PCBSD) is introduced during the quenching step of perovskite thin film processing to suppress the generation of surface defects at the electron transport layer interface and improve the bulk crystallinity. The C-PCBSD has strong coordination ability with Sn2+ and Pb2+ perovskite precursors, which retards the crystallization process, suppresses the oxidation of Sn2+, and improves the perovskite bulk and surface crystallinity, yielding films with reduced nonradiative recombination and enhanced interface charge extraction. Besides, the C-PCBSD network deposited on the perovskite surface displays superior hydrophobicity and oxygen resistance. Consequently, the devices with C-PCBSD obtain PCEs of up to 23.4% and retained 97% of initial efficiency after 2000 h of storage in a N2 atmosphere.

Unveiling Local Current Behavior and Manipulating Grain Homogenization of Perovskite Films for Efficient Solar Cells

Achieving high power conversion efficiency in perovskite solar cells (PSCs) heavily relies on fabricating homogeneous perovskite films. However, understanding microscopic-scale properties such as current generation and open-circuit voltage within perovskite crystals has been challenging due to difficulties in quantifying intragrain behavior. In this study, the local current intensity within state-of-the-art perovskite films mapped by conductive atomic force microscopy reveals a distinct heterogeneity, which exhibits a strong anticorrelation to the external biases. Particularly under different external bias polarities, specific regions in the current mapping show contrasting conductivity. Moreover, grains oriented differently exhibit varied surface potentials and currents, leading us to associate this local current heterogeneity with the grain orientation. It was found that the films treated with isopropanol exhibit ordered grain orientation, demonstrating minimized lattice heterogeneity, fewer microstructure defects, and reduced electronic disorder. Importantly, devices exhibiting an ordered orientation showcase elevated macroscopic optoelectronic properties and boosted device performance. These observations underscore the critical importance of fine-tuning the grain homogenization of perovskite films, offering a promising avenue for further enhancing the efficiency of PSCs.

Record-Efficiency Printable Hole-Conductor-Free Mesoscopic Perovskite Solar Cells Enabled by the Multifunctional Schiff Base Derivative

Tailoring multifunctional additives for performing interfacial modifications, improving crystallization, and passivating defects is instrumental for the fabrication of efficient and stable perovskite solar cells (PSCs). Here, a Schiff base derivative, (chloromethylene) dimethyliminium chloride (CDCl), is introduced as an additive to modify the interface between the mesoporous TiO2 electron transport layer and the MAPbI3 light absorber during the annealing process. CDCl chemically links to TiO2 and MAPbI3 through coordination and hydrogen bonding, respectively, and results in the construction of fast electron extraction channels. CDCl also optimizes the energy-level alignment of the TiO2/MAPbI3 heterojunction and improves the pore-filling and crystallization of MAPbI3 in the mesoscopic scaffold, which inhibits nonradiative recombination and eliminates open-circuit voltage losses. As a result, an impressive power conversion efficiency of 19.74%, which is the best one ever reported, is obtained for printable carbon-based hole-conductor-free PSCs based on MAPbI3.

Multi-Functional Regulation on Buried Interface for Achieving Efficient Triple-Cation Perovskite Solar Cells

Mixed-cation perovskite solar cells (PSCs) have attracted much attention because of the advantages of suitable bandgap and stability. It is still a challenge to rationally design and modify the perovskite/tin oxide (SnO2) heterogeneous interface for achieving highly efficient and stable PSCs. Herein, a strategy of one-stone-for-three-birds is proposed to achieve multi-functional interface regulation via introducing N-Chlorosuccinimide (NCS) into the solution of SnO2: i) C═O functional group in NCS can induces strong binding affinity to uncoordinated defects (oxygen vacancies, free lead ions, etc) at the buried interface and passivate them; ii) incomplete in situ hydrolysis reactions can occur spontaneously and adjust the pH value of the SnO2 solution to achieve a more matchable energy level; iii) effectively releasing the residual stress of the underlying perovskite. As a result, a champion power conversion efficiency (PCE) of 24.74% is achieved with a device structure of ITO/SnO2/Perovskite/Spiro-OMeTAD/Ag, which is one of the highest values for cesium-formamidinium-methylammonium (CsFAMA) triple cation PSCs. Furthermore, the device without encapsulation can sustain 94.6% of its initial PCE after the storage at room temperature and relative humidity (RH) of 20% for 40 days. The research provides a versatile way to manipulate buried interface for achieving efficient and stable PSCs.

Nanoscale Local Contacts Enable Inverted Inorganic Perovskite Solar Cells with 20.8 % Efficiency

Inorganic perovskite solar cells (IPSCs) have gained significant attention due to their excellent thermal stability and suitable band gap (~1.7 eV) for tandem solar cell applications. However, the defect-induced non-radiative recombination losses, low charge extraction efficiency, energy level mismatches, and so on render the fabrication of high-efficiency inverted IPSCs remains challenging. Here, the use of 3-amino-5-bromopyridine-2-formamide (ABF) in methanol was dynamically spin-coated on the surface of CsPbI2.85Br0.15 film, which facilitates the limited etching of defect-rich subsurface layer, resulting in the formation of vertical PbI2 nanosheet structures. This enabled localized contacts between the perovskite film and the electron transport layer, suppress the recombination of electron-hole and beneficial to electron extraction. Additionally, the C=O and C=N groups in ABF effectively passivated the undercoordinated Pb2+ at grain boundaries and on the surface of CsPbI2.85Br0.15 film. Eventually, we achieved a champion efficiency of 20.80 % (certified efficiency of 20.02 %) for inverted IPSCs with enhanced stability, which is the highest value ever reported to date. Furthermore, we successfully prepared p-i-n type monolithic inorganic perovskite/silicon tandem solar cells (IPSTSCs) with an efficiency of 26.26 %. This strategy provided both fast extraction and efficient passivation at the electron-selective interface.

Anchoring Charge Selective Self-Assembled Monolayers for Tin-Lead Perovskite Solar Cells

Self-assembled monolayers (SAMs) have displayed great potential for improving efficiency and stability in p-i-n perovskite solar cells (PSCs). The anchoring of SAMs at the conductiv metal oxide substrates and their interaction with perovskite materials must be rationally tailored to ensure efficient charge carrier extraction and improved quality of the perovskite films. Herein, SAMs molecules with different anchoring groups and spacers to control the interaction with perovskite in the p-i-n mixed Sn-Pb PSCs are selected. It is found that the monolayer with the carboxylate group exhibits appropriate interaction and has a more favorable orientation and arrangement than that of the phosphate group. This results in reduced nonradiative recombination and enhanced crystallinity. In addition, the short chain length leads to an improved energy level alignment of SAMs with perovskite, improving hole extraction. As a result, the narrow bandgap (≈1.25 eV) Sn-Pb PSCs show efficiencies of up to 23.1% with an open-circuit voltage of up to 0.89 V. Unencapsulated devices retain 93% of their initial efficiency after storage in N2 atmosphere for over 2500 h. Overall, this work highlights the underexplored potential of SAMs for perovskite photovoltaics and provides essential findings on the influence of their structural modification.

Simultaneous Defect Passivation and Electric Level Regulation with Rubidium Fluoride for High-Efficiency CsPbI2Br Perovskite Solar Cells

Due to the good balance of efficiency and stability, CsPbI2Br perovskite solar cells (PSCs) recently have attracted widespread attention. However, the improvement in photovoltaic performance for CsPbI2Br PSCs was mainly limited by massive defects and unmatched energy levels. Surface modification is the most convenient and effective strategy to decrease defect densities of perovskite films. Herein, we deposited rubidium fluoride (RbF) onto the surface of CsPbI2Br perovskite films by spin-coating. The numerous defects could be significantly passivated by RbF, resulting in suppressed nonradiative recombination. Furthermore, the CsPbI2Br perovskite film after RbF treatment exhibits a deeper Fermi level, and an additional built-in electric field forms to promote charge transport. Consequently, the champion device achieves a high efficiency of 10.82% with an improved VOC of 1.14 V, and it also exhibits excellent stability after long-term storage. This work offers a simple and effective approach to enhance the photovoltaic performance and stability of PSCs for broader applications in the future.

Dipolar Chemical Bridge Induced CsPbI3 Perovskite Solar Cells with 21.86 % Efficiency

CsPbI3 perovskite receives tremendous attention for photovoltaic applications due to its ideal band gap and good thermal stability. However, CsPbI3 perovskite solar cells (PSCs) significantly suffer from photovoltage deficits because of serious interfacial energy losses within the PSCs, which to a large extent affects the photovoltaic performance of PSCs. Herein, a dipolar chemical bridge (DCB) is constructed between the perovskite and TiO2 layers to lower interfacial energy losses and thus improve the charge extraction of PSCs. The results reveal that the DCB could form a beneficial interfacial dipole between the perovskite and TiO2 layers, which could optimize the interfacial energetics of perovskite/TiO2 layers and thus improve the energy level alignment within the PSCs. Meanwhile, the constructed DCB could also simultaneously passivate the surface defects of perovskite and TiO2 layers, greatly lowering interfacial recombination. Consequently, the photovoltage deficit of CsPbI3 PSCs is largely reduced, leading to a record efficiency of 21.86 % being realized. Meanwhile, the operation stability of PSCs is also largely improved due to the high-quality perovskite films with released interfacial tensile strain being obtained after forming the DCB within the PSCs.

Hexylammonium Acetate-Regulated Buried Interface for Efficient and Stable Perovskite Solar Cells

Due to current issues of energy-level mismatch and low transport efficiency in commonly used electron transport layers (ETLs), such as TiO2 and SnO2, finding a more effective method to passivate the ETL and perovskite interface has become an urgent matter. In this work, we integrated a new material, the ionic liquid (IL) hexylammonium acetate (HAAc), into the SnO2/perovskite interface to improve performance via the improvement of perovskite quality formed by the two-step method. The IL anions fill oxygen vacancy defects in SnO2, while the IL cations interact chemically with Pb2+ within the perovskite structure, reducing defects and optimizing the morphology of the perovskite film such that the energy levels of the ETL and perovskite become better matched. Consequently, the decrease in non-radiative recombination promotes enhanced electron transport efficiency. Utilizing HAAc, we successfully regulated the morphology and defect states of the perovskite layer, resulting in devices surpassing 24% efficiency. This research breakthrough not only introduces a novel material but also propels the utilization of ILs in enhancing the performance of perovskite photovoltaic systems using two-step synthesis.

Oriented Molecular Bridge Constructs Homogeneous Buried Interface for Perovskite Solar Cells with Efficiency Over 25.3

Buried interface optimization matters the efficiency improvement of planar perovskite solar cells (PSCs), and the molecular bridge is reported to be an effective approach. Herein, a molecular bridge is constructed at buried interface using 4-chloro-3-sulfamoylbenzoic acid (CSBA), and its preferred arrangement is systematically investigated. It is elucidated that the CSBA molecular is prone to be orientationally absorbed on TiO2 surface through COOH-Ti, and then connect with perovskite through S═O-Pb, resulting in a feasible oriented molecular bridge. Contributing to the passivated interfacial defects, optimized interfacial energy level, and released perovskite tensile stress, resulting from the oriented CSBA molecular bridge, the PSCs with an active area of 0.08 cm2 achieve a certified power conversion efficiency (PCE) of 25.32%, the highest among the TiO2-based planar PSCs. Encouragingly, the PSCs with an active area of 1 cm2 achieve a champion PCE of 24.20%, significantly promoting the efficiency progress of large-area PSCs. In addition, the PSCs with oriented CSBA molecular bridge possess enhanced stability, the unencapsulated PSCs can maintain ≈91% and ≈85% of their initial PCE after 3000 h aging under ambient condition and 1200 h aging under exposure to UV irradiation.

Synergetic Regulation of Interface Defects and Carriers Dynamics for High-Performance Lead-Free Perovskite Solar Cells

Severe nonradiative recombination and open-circuit voltage loss triggered by high-density interface defects greatly restrict the continuous improvement of Sn-based perovskite solar cells (Sn-PVSCs). Herein, a novel amphoteric semiconductor, O-pivaloylhydroxylammonium trifluoromethanesulfonate (PHAAT), is developed to manage interface defects and carrier dynamics of Sn-PVSCs. The amphiphilic ionic modulators containing multiple Lewis-base functional groups can synergistically passivate anionic and cationic defects while coordinating with uncoordinated Sn2+ to compensate for surface charge and alleviate the Sn2+ oxidation. Especially, the sulfonate anions raise the energy barrier of surface oxidation, relieve lattice distortion, and inhibit nonradiative recombination by passivating Sn-related and I-related deep-level defects. Furthermore, the strong coupling between PHAAT and Sn perovskite induces the transition of the surface electronic state from p-type to n-type, thus creating an extra back-surface field to accelerate electron extraction. Consequently, the PHAAT-treated device exhibits a champion efficiency of 13.94% with negligible hysteresis. The device without any encapsulation maintains 94.7% of its initial PCE after 2000 h of storage and 91.6% of its initial PCE after 1000 h of continuous illumination. This work provides a reliable strategy to passivate interface defects and construct p-n homojunction to realize efficient and stable Sn-based perovskite photovoltaic devices.

Optimizing the Buried Interface in Flexible Perovskite Solar Cells to Achieve Over 24% Efficiency and Long-Term Stability

The buried interface of the perovskite layer has a profound influence on its film morphology, defect formation, and aging resistance from the outset, therefore, significantly affects the film quality and device performance of derived perovskite solar cells. Especially for FAPbI3 , although it has excellent optoelectronic properties, the spontaneous transition from the black perovskite phase to nonperovskite phase tends to start from the buried interface at the early stage of film formation then further propagate to degrade the whole perovskite. In this work, by introducing ─NH3 + rich proline hydrochloride (PF) with a conjugated rigid structure as a versatile medium for buried interface, it not only provides a solid α-phase FAPbI3 template, but also prevents the phase transition induced degradation. PF also acts as an effective interfacial stress reliever to enhance both efficiency and stability of flexible solar cells. Consequently, a champion efficiency of 24.61% (certified 23.51%) can be achieved, which is the highest efficiency among all reported values for flexible perovskite solar cells. Besides, devices demonstrate excellent shelf-life/light soaking stability (advanced level of ISOS stability protocols) and mechanical stability.

C60-CN: A bifunctional interface modification material for perovskite solar cells

Titanium dioxide (TiO2) is regularly used as an electron transport material in n-i-p perovskite solar cells (PSCs). However, massive defects exist on the TiO2 surface, which will lead to serious hysteresis and interface charge recombination of the device, thus affecting the device's efficiency. In this study, a cyano fullerene pyrrolidine derivative (C60-CN) was synthesized and applied to PSCs for the first time to modify the TiO2 electron transport layer. Systematic studies have shown that the addition of the C60-CN modification layer on the TiO2 surface will enlargement the perovskite grain size, improve the perovskite film quality, enhance electron transport, and reduce charge recombination. The C60-CN layer can significantly reduce the density of trap states in the perovskite solar cells. As a result, the PSCs based on C60-CN/TiO2 obtained a power conversion efficiency (PCE) of 18.60%, suppressing the hysteresis and improving the stability, whereas the PCE of the control device using the original TiO2 ETL was lower, 17.19%.

Synergistic Surface Defect Passivation of Ionic Liquids for Efficient and Stable MAPbI3-Based Inverted Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells are fabricated using polycrystalline perovskite thin films, which possess high densities of point and surface defects. The surface defects of perovskite thin films are the key factors that affect the device performance. Therefore, the reduction of harmful defects is the primary task for improving device performance. Therefore, in this study, high-quality perovskite thin films are prepared using an ionic liquid, dithiocarbamate diethylamine (DADA), to passivate the interface. The electron-rich sulfur atom in the DADA molecule chelates with the uncoordinated lead ion in the perovskite films, and the diethylammonium cation forms a hydrogen bond with the free iodine ion, which further improves the passivation. The synergistic passivation and improved morphology of the perovskite thin films substantially reduce the number of charged defects on the film surface and prolong the carrier lifetime. In addition, the DADA surface treatment increases the work function of the perovskite film, which is beneficial for carrier transport. Under standard solar-lighting conditions, the power conversion efficiency (PCE) of the device increases from 19.13 to 21.36%, and the fill factor is as high as 83.17%. Owing to both the hydrophobicity of DADA molecules and the passivation of ion defects, the PCE of the device remains above 80%, even for the device stored for 500 h in air at a relative humidity of 65%, and the device stability is substantially improved.

Open-circuit voltage loss in perovskite quantum dot solar cells

Perovskite quantum dots are a competitive candidate for next-generation solar cells owing to their superior phase stability and multiple exciton generation effects. However, given the voltage loss in perovskite quantum dot solar cells (PQDSCs) is mainly caused by various surface and interfacial defects and the energy band mismatch in the devices, tremendous achievements have been made to mitigate the V_oc loss of PQDSCs. Herein, we elucidate the potential threats that hinder the high V_oc of PQDSCs. Then, we summarize recent progress in minimizing open-circuit voltage (V_oc) loss, including defect manipulation and device optimization, based on band-alignment engineering. Finally, we attempt to shed light on the methodologies used to further improve the performance of PQDSCs.