Advances in Solution-Processed OLEDs and their Prospects for Use in Displays

Highly Efficient Narrowband Circularly Polarized Luminescence from Discrete Supramolecular Aggregates

Achieving narrowband emission, high efficiency, and circularly polarized luminescence (CPL) in organic light-emitting diodes (OLEDs) remains a significant challenge. In this study, a discrete supramolecular dimerization strategy is presented to overcome this limitation. By incorporating a helical arylamine with a sterically demanding configuration into a multi-resonance narrowband emitter, the formation of a unique dimeric structure in the solid state is enabled. Unlike conventional multi-resonance emitters prone to aggregation-caused quenching and continuous stacking, the CPL emitters form discrete, well-separated dimers. This distinct supramolecular arrangement not only preserves high photoluminescence quantum yield and narrowband emission but also amplifies CPL signals by optimizing intermolecular electronic coupling. OLEDs incorporating these enantiomers at a 10 wt.% doping level exhibit outstanding performances, including a narrow full-width at half-maximum of 30 nm, maximum external quantum efficiencies (EQE) of 33.5% and 32.4%, and impressive electroluminescence dissymmetry factors (gEL) of +8.7 × 10-3 and -9.1 × 10-3, respectively. Remarkably, increasing the doping concentration to 20 wt.% further boosts the gEL values to +1.6 × 10-2 and -1.8 × 10-2. This enhancement leads to Figures of Merit (EQE × |gEL|) of 3.71 × 10-3 and 4.12 × 10-3, among the highest values for CPL devices.

Advances in Single-Crystal Films: Synergistic Insights from Perovskites and Organic Molecules for High-Performance Optoelectronics

Semiconductor single-crystal thin films are crucial for the advancement of high-performance optoelectronic devices. Despite significant progress in fabricating perovskite and organic single-crystal films, interdisciplinary insights between these domains remain unexplored. This review aims to bridge this gap by summarizing recent advances in fabrication strategies for perovskite and organic molecular single-crystal films. Five preparation methods-solution-phase epitaxy, solid-phase epitaxy, meniscus-induced crystallization, antisolvent-induced crystallization, and space-confined growth-are analyzed with a focus on their principles, functional properties, and distinct advantages. By comparing these approaches across material systems, this review identifies transferable insights that can drive the development of large-scale, high-quality single-crystal films. Furthermore, the optoelectronic applications of these films are explored, including solar cells, photodetectors, light-emitting devices, and transistors, while addressing challenges such as scalability, defect control, and integration. This work highlights the importance of cross-disciplinary innovation and provides an effective pathway for integrating perovskite and organic molecular processing to advance the next generation of single-crystal film technologies.

Fused Dual-Donor Design for Accelerating Reverse Intersystem Crossing Rates of Spatially Folded Through-Space Charge Transfer Emitters

The development of through-space charge transfer (TSCT)-thermally activated delayed fluorescence (TADF) material is defective in relatively low reverse intersystem crossing (RISC) rates (commonly <5 × 105 s-1). Herein, we fuse two 3,6-dimethyl-8H-indolo[3,2,1-de]acridine (IAc) donor units to obtain large planar donors (m-bIAc and p-bIAc) for forming spatially folded A-D|D-A configured TSCT emitters (DCT-1 and DCT-2). The configuration of highly parallel and large-plane intramolecular multiple π-stacking has been achieved. The symmetrical multi-channel charge transfer networks of emitters induce multiple energetically proximal excited states within a small energy range (<0.12 eV) at the lowest excited state, creating additional configuration interaction and spin-orbit coupling channels to accelerate the RISC process. This molecular configuration yields enhanced RISC rates of 6.19 × 105 s-1 for DCT-1 and 1.05 × 106 s-1 for DCT-2. Solution-processed organic light-emitting diodes employing these emitters achieve maximum external quantum efficiencies of 18.9% (DCT-1, 474 nm sky-blue emission) and 23.9% (DCT-2, 498 nm green emission), with attenuated efficiency roll-offs of DCT-2 (12% at 1000 cd m-2). This work provides a critical pathway for manipulating dense excited states to address the bottleneck of the RISC rates while maintaining structural rigidity, promoting further advancement of TSCT-TADF materials.

Preparation of Thermally and Photochemically Immobilized N-type Conjugated Polymer Films via Quantitative Backbone Editing

We report a series of n-type conjugated polymers based on PNDI-TfBTT and PNDIV-TfBTT backbones constructed from electron-deficient naphthalene diimide (NDI) and fluorinated benzothiadiazole (fBT) units, with PNDIV-TfBTT incorporating a vinylene spacer. Quantitative postpolymerization modification (PPM) via nucleophilic substitution replaced the fBT fluorine with thioether side chains, optionally containing azide groups. Thioether substitution improved solubility, while subtly changing the ordering of polymer films. Azide incorporation enabled both thermal and photochemical crosslinking, yielding insoluble and immobile films that retained good electron transport; although UV crosslinking initially reduced mobility, subsequent thermal annealing largely restored crystallinity and performance. This work underscores the utility of precise backbone editing to fine-tune the electronic and morphological properties of n-type polymers, offering new avenues for the fabrication of stable, patterned active layers in advanced organic electronic devices.

Solution-Processed Blue Narrowband OLED Devices with External Quantum Efficiency Beyond 35 % through Horizontal Dipole Orientation Induced by Electrostatic Interaction

The multiple resonance thermally activated delayed fluorescence (MR-TADF) device has drawn great attention due to their outstanding efficiency and color purity. However, the efficiency of solution-processed MR-TADF devices is still far behind their vacuum-deposited counterparts, due to the uncontrollable horizontal emitting dipole orientation for emitters during solution process, resulting in low light out-coupling efficiency. Here, we proposed a new strategy namely electrostatic interaction between a dendritic host with high positive electrostatic potential (ESP) and dendritic emitter with multiple negative ESP sites, which could induce high horizontal dipole ratio (Θ||) up to 83.0 % in solution-processed films. For this couple, the largest plane of dendritic host tends to anchor on the substrate, and thus the strong positive electrostatic site mainly lies at the exposed tetraphenylsilicon, which could electrostatically attract the multiple negative electrostatic sites of the dendritic emitter, realizing horizontal dipole orientation. Moreover, the highly twisted structure of dendritic host and dendron encapsulation of emitter could effectively suppress aggregation, leading a high photoluminescence quantum yield of 98.6 %. As a result, the solution-processed blue MR-TADF devices exhibit a record-break external quantum efficiency of 35.3 %, as well as narrow bandwidth of 17 nm and pure blue color with CIE coordinates of (0.137, 0.176).

Charge Transport Regulation in Solution-Processed OLEDs by Indenocarbazole-Triazine Bipolar Host Copolymers

This work reports the synthesis of a series of bipolar host polymers, specifically PPPIC-co-PPDPT (9:1), PPPIC-co-PPDPT (8:2), and PPPIC-co-PPDPT (7:3), which incorporate a hole-transporting unit, 7,7-dimethyl-5-phenyl-2-(4-vinylphenyl)-5,7-dihydroindeno[2,1-b]carbazole (PPIC), and an electron-transporting unit, 2,4-diphenyl-6-(4-vinylphenoxy)-1,3,5-triazine (PDPT). These polymers are meticulously designed to achieve efficient bipolar charge transport while exhibiting high triplet energy levels (T1), robust thermal stability, and smooth surface morphology. The tunability of the recombination zone position was achieved by adjusting the relative ratio of the hole and electron transport units in the emissive layer, leading to optimized charge balance and enhanced device performance. The maximum current efficiency of 40.71 cd/A and an EQE of 11.19% were achieved through a simple device structure. Overall, this study highlights the potential of these bipolar host materials for advancing the OLED technology by enabling superior charge transport and reducing efficiency roll-off.

Efficient harvesting of triplet excitons via multiple fast TTA up-conversion and high-lying reverse intersystem crossing channels for efficient blue fluorescent organic light-emitting diodes

The efficient harvesting of triplet excitons is key to realizing high efficiency blue fluorescent organic light-emitting diodes (OLEDs). Triplet-triplet annihilation (TTA) up-conversion is one of the effective triplet-harvesting strategies. However, during the TTA up-conversion process, a high current density is necessary due to the competitive non-radiative triplet losses. In this study, we designed blue organic light-emitting diodes with fast TTA up-conversion and high-lying reverse intersystem crossing channels. It can be seen that the utilization of triplet excitons was greatly improved and the non-radiative triplet losses were significantly suppressed due to the availability of multiple efficient channels for triplet exciton utilization. As a result, a high efficiency blue fluorescent OLED was successfully fabricated. The maximum external quantum efficiency (EQE) reached 11.4% with CIE coordinates of (0.13, 0.11). This research provides a new route for the development of high efficiency blue fluorescent OLEDs.

Nanocrystalline Perovskites for Bright and Efficient Light-Emitting Diodes

Nanocrystalline perovskites have driven significant progress in metal halide perovskite light-emitting diodes (PeLEDs) over the past decade by enabling the spatial confinement of excitons. Consequently, three primary categories of nanocrystalline perovskites have emerged: nanoscale polycrystalline perovskites, quasi-2D perovskites, and perovskite nanocrystals. Each type has been developed to address specific challenges and enhance the efficiency and stability of PeLEDs. This review explores the representative material design strategies for these nanocrystalline perovskites, correlating them with exciton recombination dynamics and optical/electrical properties. Additionally, it summarizes the trends in progress over the past decade, outlining four distinct phases of nanocrystalline perovskite development. Lastly, this review addresses the remaining challenges and proposes a potential material design to further advance PeLED technology toward commercialization.

A Multiresonant Thermally Activated Delayed Fluorescent Dendrimer with Intramolecular Energy Transfer: Application for Efficient Host-Free Green Solution-Processed Organic Light-emitting Diodes

The development of narrowband emissive, bright, and stable solution-processed organic light-emitting diodes (SP-OLEDs) remains a challenge. Here, a strategy is presented that merges within a single emitter a TADF sensitizer responsible for exciton harvesting and an MR-TADF motif that provides bright and narrowband emission. This emitter design also shows strong resistance to aggregate formation and aggregation-cause quenching. It is based on a known MR-TADF emitter DtBuCzB with a donor-acceptor TADF moiety consisting of either tert-butylcarbazole donors (tBuCzCO2HDCzB) or second-generation carbazole-based donor dendrons (2GtBuCzCO2HDCzB) and a benzoate acceptor. The TADF moiety acts as an exciton harvesting antenna and transfers these excitons via Förster resonance energy transfer to the MR-TADF emissive core. The SP-OLEDs with 2GtBuCzCO2HDCzB and tBuCzCO2HDCzB thus show very high maximum external quantum efficiencies (EQEmax of 27.9 and 22.0%) and minimal efficiency roll-off out to 5000 cd m-2.

Photothermally Cross-Linkable Polymeric Hole Transport Material Functionalized with Azide for High-Performance Quantum Dot Light-Emitting Diodes

Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(4,4'-(N-(4-butylphenyl)))] (TFB) is a widely used hole transport material (HTM) in quantum dot light-emitting diodes (QLEDs). However, TFB-based solution-processed QLEDs face several challenges, including interlayer erosion, low hole mobility, shallow energy level of the highest occupied molecular orbital, and current leakage, which compromise the device efficiency and stability. To overcome these challenges, bromine and azide-based photothermally cross-linkable TFB derivatives, i.e., TFB-Br and TFB-N3, were designed and synthesized. TFB-N3 photothermally cross-linked under 254 nm ultraviolet light at 140 °C exhibited excellent solvent resistance within 30 s. Furthermore, the photothermally cross-linked TFB-N3 formed a compact three-dimensional (3D) network in QLEDs, enhancing hole transport and reducing the leakage current. Moreover, the HOMO energy level in photothermally cross-linked TFB-N3 decreased to -5.39 eV from that in TFB (-5.30 eV), reducing the hole transport energy barrier. Thus, the charge balance in the quantum dot (QD) layer was enhanced, and the current leakage was reduced, improving the overall QLED performance. The photothermally cross-linked TFB-N3-based QLEDs achieved a maximum external quantum efficiency of 19.53%, i.e., 61% higher than that of devices using TFB. Moreover, the T90 lifetime of the photothermally cross-linked TFB-N3-based QLEDs was 4.49 times longer than that of TFB-based devices. The proposed strategy demonstrates that incorporating azide groups into polymeric HTMs can considerably enhance their hole transport and solvent resistance and reduce leakage current, improving QLED efficiency and stability.

Enhancing Carrier Behavior via Controlled Molecular Film Formation Engineering Leads to Significant Improvement in Electroluminescence

The quality of organic thin films critically influences carrier dynamics in organic semiconductors. In neat/doped films, even tiny voids can be penetrated by water or oxygen molecules to create charge-trap states called water/oxygen-induced traps that significantly hinder carrier mobility. While the water/oxygen-induced traps in non-doped films and crystalline states have been investigated comprehensively, there is a lack of thorough examination regarding their properties in the doped state. Therefore, there is a high demand for a molecular design strategy that effectively modulates the molecular stacking behavior in doped films and practical devices and enhances the quality of these films. Herein, we proposed a versatile molecular design principle that enables the formation of "nano-cluster" structures on both the surface and interior of doped films in target molecule 10-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-1'-(4-fluorophenyl)-10H-spiro[acridine-9,9'-xanthene] (DspiroO-F-TRZ), which is modified with a fluorophenyl group. These "nano-cluster" structures exhibit more uniform shapes within doped films and effectively reduce defective state densities while enhancing carrier injection and transport properties, ultimately improving device performance. Notably, TADF-OLED based on DspiroO-F-TRZ demonstrates nearly twice as much efficiency as its control counterpart due to contributions from 'nano-cluster' structure enhancements toward improved electroluminescence performance.

Donor-Acceptor Viologens with Through-Space Conjugation for Enhanced Visible-Light-Driven Photocatalysis

A series of novel donor-acceptor (D-A) type viologens with through-space conjugation (TSC) are synthesized. The synergistic effect of D-A conjugation and TSC endow these compounds with a narrower energy gap, excellent redox properties, strong absorption in the visible range (up to 450 nm), and high efficiency of intramolecular charge transfer (ICT). These compounds also exhibit a long-lived charge separation state and stable radical formation. Considering their impressive photophysical and redox properties, TSC viologens with D-A conjugation are explored for visible-light-driven photocatalysis. As a catalyst in oxidative coupling reactions under visible light, compound 9 can achieve a yield of 94%, attributed to its strong ICT effect. Additionally, hybridized into graphitic carbon nitride (g-C₃N₄), compound 9 enhances hydrogen production performance under visible light, achieving an H2 generation rate of 4102 µmol h-1g-1. This study highlights the potential applications of TSC viologens in photocatalytic systems.

Ternary Compensation Enables High-sensitive Efficient Upconversion Device for NIR Visualization

Beyond the crystalline photodiodes for infrared visualization, with the limitation of opacity and complex lithographic processes, organic upconversion device (UCD) have emerged as a potential alternative. In this research, a ternary compensation strategy is implemented in a non-fullerene-based active layer to reduce the dark current of the detector and enhance its detection performance, which enables high-sensitive efficient upconversion device for near-infrared light (NIR) visualization. The device achieves an infrared-to-visible upconversion efficiency of 16.68% when resolving the 980 nm infrared signal at a power density of 0.4 mW cm-2. In addition, by replacing the semitransparent matrix electrodes, a large-area (12.25 cm2) is further fabricated, lightweight (6.5 g containing encapsulation), pixel-less (equivalent resolution 1270 ppi), and semitransparent (AVT ≈40%) UCD with microsecond response time. The fabricated UCD is demonstrated in pixel-less active infrared naked-eye visualization and infrared counter-surveillance, fostering the advancement of infrared visualization technology.

Analysis of polaron pair lifetime dynamics and secondary processes in exciplex driven TADF OLEDs using organic magnetic field effects

Magnetic field effects (MFEs) in thermally activated delayed fluorescence (TADF) materials have been shown to influence the reverse intersystem crossing (RISC) and to impact on electroluminescence (EL) and conductivity. Here, we present a novel model combining Cole-Cole and Lorentzian functions to describe low and high magnetic field effects originating from hyperfine coupling, the Δg mechanism, and triplet processes. We applied this approach to organic light-emitting devices of third generation based on tris(4-carbazoyl-9-ylphenyl)amine (TCTA) and 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi), exhibiting blue emission, to unravel their loss mechanisms. The quality of the regression function was evaluated using k-fold cross-validation. The scoring was compared to various alternative fitting functions, which were previously proposed in literature. Density functional theory calculations, photoluminescence, and electroluminescence studies validated the formation of a TADF exciplex system. Furthermore, we propose successful encapsulation using a semi-permeable polymer, showing promising results for magnetic field sensing applications on arbitrary geometry. This study provides insights into the origin of magnetic field effects in exciplex-TADF materials, with potential applications in optoelectronic devices and sensing technologies.

Efficient Organic Light-Emitting Diodes Obtained by Introducing Gadolinium (Gd) Complexes Based on Pyrazolone Derivative Ligands as Hole Trappers

The utilization of lanthanide (Ln) complexes in the realm of organic light-emitting diodes (OLEDs) has garnered extensive interest, particularly in their role as luminescent materials or electron trappers. A series of gadolinium (Gd) complexes with energy levels of high HOMO/LUMO and different triplet state energies were designed and synthesized by introducing substituents with different electronic effects onto the pyrazolone derivative ligands. Subsequently, these complexes were precisely purified by vacuum sublimation and codoped into the light-emitting layer (EML) of the OLEDs. This process was facilitated through the well-matched HOMO/LUMO levels and triplet energies among various functional materials. Consequently, the maximum external quantum efficiencies of blue, red, and green OLEDs were simultaneously enhanced with the ratios of 119%, 28%, and 71%, respectively. This improvement can be credited to the introduction of Gd(III) complex molecules within EMLs, which helps to capture excess holes and improve carriers' balance.

Long-Lived Room-Temperature Phosphorescence from Silica Nanoparticles with In Situ Generated Carbonaceous Defects for Blue Organic Light-Emitting Diodes

In this study, in situ formed silica nanoparticles (SNPs) emitting second-level phosphorescence at room temperature without a phosphorescent dopant have been achieved for the first time. This phosphorescence is achieved through the simple in situ formation of carbonaceous defects (CDs) within the SNPs, followed by passivation of the CDs by a robust silica matrix. The CD in the SNPs, termed CD@SNPs, are synthesized by cross-linking tetraethyl orthosilicate (TEOS) and (3-aminopropyl)triethoxysilane (APTES), and these cross-linked components create a porous structure within the silica matrix. Upon calcination, the carbon-related structures within the pores deform, leading to the formation of CDs. Confined within a robust silica matrix, the molecular motion of the CD is restricted, facilitating the generation of a stable triplet state and suppressing nonradiative decay. Moreover, the robust silica matrix passivates the CD confined in the SNPs at a nanoscale. These comprehensive effects enable prolonged phosphorescence emission from the SNPs. In addition, these phosphorescence-emitting SNPs have been applied as dopants in the emissive layer of organic light-emitting diodes to realize blue light emission. This feature suggests the possibility of utilizing luminescent SNPs as light emitters in display technologies.

Stretching Aligned Hydrogen Bonding Network to Evoke Mechanically Robust and High-Energy-Density P(VDF-HFP) Dielectric Film Capacitors

Polymer-based dielectric film capacitors are essential energy storage components in electronic and power systems due to their ultrahigh power density and ultra-fast charge storage/release capability. Nonetheless, their relatively low energy density does not fully meet the requirements of power electronics and pulsed power systems. Herein, a scalable composite dielectric film based on a ferroelectric polymer with edge hydroxylated boron nitride nanosheets (BNNS-OH) is fabricated via the construction of a hydrogen bonding network and stretching orientation strategy. The presence of hydroxyl groups on boron nitride aids in forming a robust hydrogen bonding network within the ferroelectric polymer, leading to a significant increase in Young's modulus and superior dielectric performance. Furthermore, the stretching process aligns the BNNS-OH and the hydrogen bonding network along the drawing direction via covalent and hydrogen bonding interaction, resulting in a remarkable tensile strength (109 MPa), breakdown strength (688 MV m-1), and energy density (28.2 J cm-3), outperforming mostrepresentative polymer-based dielectric films. In combining the advantages of a simple preparation process, extraordinary energy storage performance, and low-cost raw materials, this strategy is viable for large-scale production of polymer-based dielectric films with high mechanical and dielectric performance and opens a new path for the development of next-generation energy storage applications.

Controlling Drying Conditions in Vacuum for Uniform Film Formation in Inkjet-Printed OLEDs

The drying process of inkjet-printed organic light-emitting diodes (OLEDs) is influenced by both ink properties and external environmental factors, which ultimately affect the film profile. First, we conducted a detailed investigation of the drying time based on changes in the boiling point (BP) of mixed solvents and analyzed the correlation with the film profile. Under atmospheric drying conditions in a nitrogen (N2) atmosphere, the increased drying time under capillary-driven flow leads to greater particle movement toward the edges, significantly increasing the coffee-ring effect. Additionally, using a high-boiling-point solvent mixture of ethyl 4-methylbenzoate (EMB) and 2-ethylhexyl benzoate (EHB), we produced uniform thin films both between and within pixels (inter and intrapixel uniformity) through a vacuum drying process. In particular, we proposed a drying process model that divides the drying of inkjet pixels into a microfluidic phase and a gelation phase. Through five gelation phase-controlled vacuum drying experiments, the morphology within the pixels was precisely investigated. By sufficiently removing residual solvents after the microfluidic phase and then proceeding with heating, we produced uniform thin films. Furthermore, we fabricated OLED devices using this gelation phase-controlled vacuum drying process, achieving uniform pixel emission and improved device performance.

An Automated Analysis of Homocoupling Defects Using MALDI-MS and Open-Source Computer Software

Conjugated organic polymers have substantial potential for multiple applications but their properties are strongly influenced by structural defects such as homocoupling of monomer units and unexpected end-groups. Detecting and/or quantifying these defects requires complex experimental techniques, which hinder the optimization of synthesis protocols and fundamental studies on the influence of structural defects. Mass spectrometry offers a simple way to detect these defects but a manual analysis of many complex spectra is tedious and provides only approximate results. In this work, we develop a computational methodology for analyzing complex mass spectra of organic copolymers. Our method annotates spectra similarly to a human expert and provides quantitative information about the proportions of signal assigned to each ion. Our method is based on the open-source Masserstein algorithm, which we modify to handle large libraries of reference spectra required for annotating complex mass spectra of polymers. We develop a statistical methodology to analyze the quantitative annotations and compare the statistical distributions of structural defects in polymer chains between samples. We apply this methodology to analyze commercial and lab-made samples of a benchmark polymer and show that the samples differ both in the amount and in the types of structural defects.

Electrostatically Designing Materials and Interfaces

Collective electrostatic effects arise from the superposition of electrostatic potentials of periodically arranged (di)polar entities and are known to crucially impact the electronic structures of hybrid interfaces. Here, it is discussed, how they can be used outside the beaten paths of materials design for realizing systems with advanced and sometimes unprecedented properties. The versatility of the approach is demonstrated by applying electrostatic design not only to metal-organic interfaces and adsorbed (complex) monolayers, but also to inter-layer interfaces in van der Waals heterostructures, to polar metal-organic frameworks (MOFs), and to the cylindrical pores of covalent organic frameworks (COFs). The presented design ideas are straightforward to simulate and especially for metal-organic interfaces also their experimental implementation has been amply demonstrated. For van der Waals heterostructures, the needed building blocks are available, while the required assembly approaches are just being developed. Conversely, for MOFs the necessary growth techniques exist, but more work on advanced linker molecules is required. Finally, COF structures exist that contain pores decorated with polar groups, but the electrostatic impact of these groups has been largely ignored so far. All this suggest that the dawn of the age of electrostatic design is currently experienced with potential breakthroughs lying ahead.

Polymer Hosts Containing Carbazole-Dibenzothiophene-Based Pendants for Application in High-Performance Solution-Processed TADF-OLEDs

The film-forming capability of the host plays a crucial role in effectively forming a light-emitting layer through a solution process in organic light-emitting diodes (OLEDs). In this study, we synthesized two side-chain polymer hosts, PCz-DBT and P2Cz-DBT, consisting of carbazole and dibenzothiophene. The synthesis was carried out through radical polymerization using styrene-based host monomers. Their photophysical characteristics and molecular energy levels are similar to those of the reference small molecule hosts, namely, Cz-DBT and 2Cz-DBT. However, compared to the small-molecule hosts Cz-DBT and 2Cz-DBT, the two polymer hosts showed high thermal stability and good film-forming properties in the neat and host-emitter blend films. Specifically, bluish-green multiple-resonance (MR) thermally activated delayed fluorescence (TADF) OLEDs, fabricated via solution processing with an emissive layer based on P2Cz-DBT, exhibited remarkable performance. These devices achieved a maximum external quantum efficiency of 17.4% without utilizing a hole transport layer. This polymer host design strategy is considered to significantly contribute to enhancing the performance of TADF-OLEDs fabricated through solution processing.

Synthesis, Photoluminescence, and Electroluminescence of Phosphorescent Dipyrido[3,2-a;2'3'-c]phenazine-Platinum(II) Complexes Bearing Hole-Transporting Acetylide Ligands

In this study, novel phosphorescent dipyrido[3,2-a;2'3'-c]phenazine (dppz)-platinum(II)-phenylacetylide complexes were developed to fabricate non-doped organic light-emitting diodes (OLED) by solution-processing. To facilitate the charge carrier injection into the emitting layer (EML), 3,6-di-tert-butylcarbazole-functinalized phenylacetylides were employed. As for the dppz ligand, 9,9-dihexylfluoren-2-yl and 4-hexylthiophen-2-yl side-arms were introduced to the 2,7-positions, which led to reddish orange and red photoluminescence (PL), respectively, in solution and film states (PL wavelength: ca. 600 and ca. 625 nm, respectively). The carbazole-appended phenylacetylide ligands hardly affected the emission color, although unsubstituted phenylacetylides gave rise to aggregate- or excimer-based near-infrared PL with a low quantum yield. Two types of non-doped OLEDs were fabricated: single-layer and multilayer devices. In both devices, the organic layers were fabricated by spin-coating, and the EML consisted of a neat film of the corresponding platinum(II) complex. Therein, electroluminescence spectra corresponding to those of PL were observed. The single-layer devices exhibited low device efficiencies due to a deteriorated charge carrier balance. The multilayer devices possessed hole- and electron-transporting layers on the anode and cathode sides of the EML, respectively. Owing to an improved charge carrier balance, the multilayer devices exhibited higher device performance, affording considerably improved values of luminance and external quantum efficiency.

Boosting Hole Mobility: Indenofluorene-Arylamine Copolymers and Their Impact on Solution-Processed OLED Performance

We introduce three newly designed thermally cross-linkable hole transport copolymers (PIF-TPD, PIF-F2PCz, and PIF-TPAPCz) for improving the performance of solution-processed organic light-emitting diodes (s-OLEDs). These copolymers, designed through a strategic molecular approach with benzocyclobutene (BCB) and styrene-based cross-linking monomers, show high solvent resistance at a low cross-linking temperature (150 °C). Furthermore, these conjugated copolymers based on planar indenofluorene with three different hole transport (HT) units, exhibit outstanding charge carrier mobility (1.61 × 10-2 cm2 V-1s-1), demonstrated by comparing hole reorganization energy and electronic coupling strength of HT units. Despite these copolymers showing the overall vertical orientation in the horizontal dipole moment measurement results, we demonstrated that the HT units can exhibit the preferred orientation, contributing to high hole transport properties. As a result, they perform exceptionally well as hole transport layers in green phosphorescent s-OLEDs, achieving a maximum external quantum efficiency of 15.3% and a maximum current efficiency of 53.9 cd A-1 with a small efficiency roll-off despite their relatively low triplet energy levels. These results are comparable to vacuum-deposited OLEDs, highlighting the potential of these copolymers in advancing OLED technology for display panels and lighting applications.

Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

Triphenylamine Spirofunctionalized Light-Emitting Conjugated Polymer with an Ultradeep-Blue Narrowband Emission for Large-Area Printed Display

Emerging printed large-area polymer light-emitting diodes (PLEDs) are essential for manufacturing flat-panel displays and solid lighting devices. However, it is challenging to obtain large-area and stable ultradeep-blue PLEDs because of the lack of light-emitting conjugated polymers (LCPs) with robust deep-blue emissions, excellent morphological stabilities, and high charging abilities. Here, a novel unsymmetrically substituted polydiarylfluorene (POPSAF) is obtained with stable narrowband emission for large-area printed displays via triphenylamine (TPA) spirofunctionalization of LCPs. POPSAF films show narrowband and stable ultradeep-blue emission with a full width at half maximum (FWHM) of 36 nm, associated with their intrachain excitonic behavior without obvious polaron formation. Compared to controlled poly[4-(octyloxy)-9,9-diphenylfluoren-2,7-diyl]-co-[5-(octyloxy)-9,9-diphenylfluoren-2,7-diyl] (PODPF), excellent charge transport is observed in the POPSAF films because of the intrinsic hole transport ability of the TPA units. Large-area PLEDs are fabricated via blade-coating with an emission area of 9 cm2, which exhibit uniform ultradeep-blue emission with an FWHM of 36 nm and corresponding Commission internationale de l'éclairage (CIE) coordinates of (0.155, 0.072). These findings are attributed to the synergistic effects of robust emission, stable morphology, and printing capacity. Finally, preliminary printed passive matrix (PM) PLED displays with 20 × 20 pixels monochromes are fabricated, confirmed the effectiveness of spirofunctionalization in optoelectronics.

Two Birds with One Stone: Polymerized Thermally Activated Delayed Fluorescence Small Molecules

Thermally activated delayed fluorescence (TADF) polymers show a great potential in low-cost, large-area and flexible full-color flat-panel displays. One of the most promising design rules is based on TADF+Linker, where a small molecular TADF unit is bonded to each other by a simple linker. Unlike the expensive vacuum deposition for small molecules, these polymerized TADF small molecules (Poly-TADF-SMs) are capable of cost-effective solution processing. Meanwhile, the good luminescent property of small molecular TADF emitters can be well inherited by Poly-TADF-SMs so as to bridge the efficiency gap between small molecules and polymers. Herein, we will highlight the recent progress of Poly-TADF-SMs, together with emphasis on their molecular design, photophysical and electroluminescence properties.

Hole-Injection-Barrier Effect on the Degradation of Blue Quantum-Dot Light-Emitting Diodes

Inefficient hole injection presents a major challenge in achieving stable and commercially viable solution-processed blue electroluminescent devices. Here, we conduct an in-depth study on quantum-dot light-emitting diodes (QLEDs) to understand how the energy levels of common electrodes and hole-transporting layers (HTL) affect device degradation. Our experimental findings reveal a design rule that may seem nonintuitive: combining an electrode and HTL with matched energy levels is most effective in preventing voltage rise and irreversible luminance decay, even though it causes a significant energy offset between the HTL and emissive quantum dots. Using an iterative electrostatic model, we discover that the positive outcomes, including a T95 lifetime of 109 h (luminance = 1000 nits, CIE-y = 0.087), are due to the enhanced p-type doping in the HTL rather than the assumed reduction in barrier heights. Furthermore, our modified hole injection dynamics theory, which considers distributed density-of-states, shows that the increased HTL/quantum-dot energy offset is not a primary concern because the effective barrier height is significantly lower than conventionally assumed. Following this design rule, we expect device stability to be enhanced considerably.

Adjusting the Electron-Withdrawing Ability of Acceptors in Thermally Activated Delayed Fluorescence Conjugated Polymers for High-Performance OLEDs

Constructing high-performance solution-processed organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) conjugated polymers remains a challenging issue. The electron-withdrawing ability of acceptors in TADF units significantly affects the TADF properties of the conjugated polymers. Herein, we have designed three TADF conjugated polymers, in which phenoxazine donors and anthracen-9(10H)-one acceptors are incorporated into the polymeric backbones and side chains, respectively, and the carbazole derivative is copolymerized as the host. By incorporating different heteroatoms, such as nitrogen, oxygen, or sulfur, with slightly different electronegativities into anthracen-9(10H)-one, the effect of the electron-withdrawing ability of the acceptor on the performance of conjugated TADF polymer-based OLEDs is thus systematically studied. It is found that the introduction of a nitrogen atom can enhance the spin-orbital coupling and RISC process due to the modulated energy levels and nature of the excited states. As a result, the solution-processed OLEDs based on the prepared polymer p-PXZ-XN display an excellent comprehensive performance with an EQEmax of 17.6%, a low turn-on voltage of 2.8 V, and a maximum brightness of 14750 cd m-2. Notably, the efficiency roll-off is quite low, maintaining 15.1% at 1000 cd m-2, 12.1% at 3000 cd m-2, and 6.1% at 10000 cd m-2, which ranks in the first tier among the reported TADF conjugated polymers. This work provides a guideline for constructing high-efficiency TADF polymers.

Lead-Free Halide Perovskite Nanocrystals for Light-Emitting Diodes

Lead-based halide perovskite nanocrystals (PeNCs) have demonstrated remarkable potential for use in light-emitting diodes (LEDs). This is because of their high photoluminescence quantum yield, defect tolerance, tunable emission wavelength, color purity, and high device efficiency. However, the environmental toxicity of Pb has impeded their commercial viability owing to the restriction of hazardous substances directive. Therefore, Pb-free PeNCs have emerged as a promising solution for the development of eco-friendly LEDs. This review article presents a detailed analysis of the various compositions of Pb-free PeNCs, including tin-, bismuth-, antimony-, and copper-based perovskites and double perovskites, focusing on their stability, optoelectronic properties, and device performance in LEDs. Furthermore, we address the challenges encountered in using Pb-free PeNC-LEDs and discuss the prospects and potential of these Pb-free PeNCs as sustainable alternatives to lead-based PeLEDs. In this review, we aim to shed light on the current state of Pb-free PeNC LEDs and highlight their significance in driving the development of eco-friendly LED technologies.

Confining donor conformation distributions for efficient thermally activated delayed fluorescence with fast spin-flipping

Fast spin-flipping is the key to exploit the triplet excitons in thermally activated delayed fluorescence based organic light-emitting diodes toward high efficiency, low efficiency roll-off and long operating lifetime. In common donor-acceptor type thermally activated delayed fluorescence molecules, the distribution of dihedral angles in the film state would have significant influence on the photo-physical properties, which are usually neglected by researches. Herein, we find that the excited state lifetimes of thermally activated delayed fluorescence emitters are subjected to conformation distributions in the host-guest system. Acridine-type flexible donors have a broad conformation distribution or bimodal distribution, in which some conformers feature large singlet-triplet energy gap, leading to long excited state lifetime. Utilization of rigid donors with steric hindrance can restrict the conformation distributions in the film to achieve degenerate singlet and triplet states, which is beneficial to efficient reverse intersystem crossing. Based on this principle, three prototype thermally activated delayed fluorescence emitters with confined conformation distributions are developed, achieving high reverse intersystem crossing rate constants greater than 10⁶ s^-1, which enable highly efficient solution-processed organic light-emitting diodes with suppressed efficiency roll-off.