Ultra-fast Piezocatalysts Enabled By Interfacial Interaction of Reduced Graphene Oxide/MoS2 Heterostructures

Mechanistic insights into chemical bonded BaTiO3/MoS2 dual piezoelectric heterojunction for Robust Piezo-Photocatalytic performance

To solve the limited active sites, high carrier recombination rate, and the photo-corrosion issues of layered MoS2, a novel chemically bonded BaTiO3/MoS2 (BM-x, x  = 2, 5, 10, and 20) dual piezoelectric heterojunction was synthesized. Density functional theory (DFT) calculations combined with experimental characterizations revealed that chemical bonds are formed between the 3d orbitals of Ti in BaTiO3 and the 3p orbitals of S in MoS2. These strong interactions enable BaTiO3 to be firmly anchored on the surface of 2D MoS2 sheets and thus enhance the structural stability of the catalyst. Furthermore, the intimate interfacial contact facilitates electron transfer from BaTiO3 to MoS2, while the formed type-II heterostructure induces a built-in electric field that significantly improves the generation and separation of photogenerated charge carriers. Under the synergistic effect of ultrasonic vibration and light irradiation, the valence band maximum (VBM) and conduction band minimum (CBM) of the two phases become tilted, resulting in a significant increase in the planar potential difference between them and therefore enhancing the built-in electric field. Thus, the BM-10 sample achieves a high degradation rate and an excellent Cr(VI) removal efficiency. These findings provide new insights into the structural regulation and the optimization of catalytic activity for MoS2-based piezoelectric photocatalysts.

Regulating the Electronegativity Difference and Piezoelectric Strain of the S-Mo-S Structure via Introducing Mo Vacancies for Boosting Piezo-Photoelectric Activity

Recently, piezoelectric and photocatalytic processes have shown excellent synergistic effect addressing environmental remediation challenges. Herein, a nanoflower-like Mo vacancy-modulated MoS2 (VMo-MoS2) piezo-photocatalyst with different VMo densities has been successfully synthesized using a one-step hydrothermal method. The high VMo density (12%) facilitates the enhancement of the photocatalytic activity but compromises its structural stability, resulting in unsatisfactory piezoelectric activity. Among all VMo-MoS2 piezo-photocatalysts, VMo-MoS2 with 6% VMo density exhibits the highest piezo-photocurrent density (15.50 μA cm-2), the largest potential difference (0.188 V), and the best carbamazepine (CBZ) degradation efficiency (95.81%) in only 10 min under light-ultrasound action, exhibiting a remarkable synergistic effect of the piezoelectric and photocatalytic processes. The synergistic performance originates from the simultaneous modulation of the charge distribution and the self-polarization capability of the S-Mo-S structure by VMo, as confirmed by the molecular theory calculations and finite-element simulation results. This work provides a defect engineering strategy for achieving the synergistic effect of the piezoelectric and photocatalytic processes, which opens a new research avenue for the design and application of the piezo-photocatalyst.

Probing the interactions in graphene oxide/MoS2 and reduced graphene oxide/MoS2 nanoarchitectures using multimodal scanning probe microscopy

Scanning probe microscopy (SPM) encompasses a versatile set of characterization techniques that reveal different properties and characteristics of materials. Herein, we demonstrate the potential of combining different SPM modes to understand the interactions (and their properties) between the components in two-dimensional/two-dimensional nanoarchitected thin films: graphene oxide (GO)/molybdenum disulfide (MoS2) and reduced graphene oxide (rGO)/MoS2. The films were prepared through the liquid-liquid interfacial route and analyzed by atomic force microscopy in topographic and phase contrast images, Kelvin probe force microscopy, lateral force microscopy and peak force microscopy. It was shown that the presence of oxygenated surface groups, the occurrence of structural defects and the surface electrical potential significantly affect the morphology and properties of the films. Due to their effective electrostatic interaction, the very small MoS2 flakes are uniformly distributed over the rGO flakes, whereas in an opposite way, they tend to agglomerate in the GO sheets. As a result, the GO/MoS2 film exhibits Young's modulus of 30 GPa, which is lower than that of the film containing neat GO (78 GPa), due to the increase in both deformation (2.6 nm) and adhesion (7.2 nN). Otherwise, the stiffness increases from 15 GPa to 25 GPa from neat rGO to the rGO/MoS2 nanocomposite, in which it was observed that the presence of MoS2 increases friction and promotes n-type doping. Based on the different SPM modes, it was possible to correlate the structural and morphological characteristics with some mechanical and electrical properties of bi-component thin films, and probe the specific interactions between the components.

Efficient H2O2 Production through a Dual-Channel Pathway on a Novel Organic-Inorganic Hybrid Piezocatalyst

Piezocatalysis is a promising and ecofriendly technology for hydrogen peroxide (H2O2) synthesis, yet its efficiency is hindered by limited active sites and poor electron-hole utilization. Herein, guided by theoretical calculations, a novel organic-inorganic hybrid piezocatalyst with abundant active sites and full utilization of electron-holes was rationally designed for the overall synthesis of H2O2. Results illustrated that the organic component (cobalt phthalocyanine, CoPc) switched the H2O2 synthesis of the inorganic component (BiOIO3, BIO) from a single-channel two-electron water oxidation reaction (2e- WOR) to an efficient dual-channel pathway. Specifically, Co metal centers boosted the O2 adsorption and activation by coupling with O 2p orbitals, enabling 2e- oxygen reduction reaction. Additionally, CoPc hybridization increased the piezoresponse, further facilitating 2e- WOR on BIO. The optimal sample achieved an exceptional H2O2 yield of 751.2 μmol g-1 h-1 in pure water/air and exhibited excellent degradation of refractory micropollutants. Our work introduces a novel strategy for efficient H2O2 synthesis and facilitates the advancement of sustainable water purification technologies.

N-doped MoS2 nanoflowers for the ultrasonic-vibration-driven high piezoelectric catalytic degradation

In this study, N-doped few-layer MoS2 piezocatalysts were successfully prepared by a one-pot hydrothermal method with urea as a nitrogen source. Benefiting from the optimized proportion of minority layers at edge positions and higher conductivity by N doping, the optimal N-doped few-layer MoS2 (120 mg of added urea) sample showed the optimal piezocatalytic activity for Rhodamine B (RhB) and levofloxacin (LEV), reaching 84.6 and 73.1% with the reaction kinetic rate constant of 0.020 86 and 0.017 05 min-1, respectively. In addition, the generation of superoxide radicals (·O2-) from the 120-MoS2 sample was determined to be greater than that from the 0-MoS2 sample in the piezocatalyst process by free radical scavenging experiments and electron paramagnetic resonance tests. Based on experimental data, a potential mechanism has been proposed to explain the enhanced piezocatalyst performance of N-doped few-layer MoS2. This research sheds new light on the development of efficient, cost-effective MoS2 piezoelectric catalysts through the doping of non-metallic dopants.

Linking D-Band Center Modulation with Rapid Reversible Sulfur Conversion Kinetics via Structural Engineering of VS₂

The rapid catalytic conversion toward polysulfides is considered to be an advantageous approach to boost the reaction kinetics and inhibit the shuttle effect in lithium-sulfur (Li─S) batteries. However, the prediction of high catalytic activity Li─S catalysts has become challenging given the carelessness in the relationship between important electronic characteristics of catalysts and catalytic activity. Herein, the relationships between the D-band regulation of catalysts with reaction kinetics toward polysulfides are described. Through the combination of experimental and theoretical analysis, the opportune upward shift of the D-band center results in a favorable interaction with polysulfides, controlling the adsorption behavior of polysulfides. In addition, the electron regulation achieved by moderately moving up the D-band center further reduces the reaction energy barrier through hybridization with polysulfides. Based on this, a composite catalyst Mo doped VS2/rGO as a host material is proposed, which provides impressive long-term cycling stability and superior rate performance. This fundamental knowledge of the inherent connection between the D-band center of the catalyst and the reaction Kinetics of polysulfides offers a rationale for the development of the Li─S catalyst and the modification of its activity.

Ocean wave-driven covalent organic framework/ZnO heterostructure composites for piezocatalytic uranium extraction from seawater

Piezoelectric catalysis possesses the potential to convert ocean wave energy into and holds broad prospects for extracting uranium from seawater. Herein, the Z-type ZnO@COF heterostructure composite with excellent piezoelectric properties was synthesized through in situ growth of covalent organic frameworks (COFs) on the surface of ZnO and used for efficient uranium extraction. The designed COFs shell enables ZnO with stability, abundant active sites and high-speed electron transport channels. Meanwhile, the interface electric field established in the heterojunctions stimulates electron transfer from COFs to ZnO, which break the edge shielding effect of the ZnO's metallic state. Additionally, the polarization of ZnO is enhanced by heterogeneous engineering, which ensures the excellent piezocatalytic performance. As a result, ZnO@COF achieves an ultra-high efficiency of 7.56 mg g-1 d-1 for uranium extraction from natural seawater driven by waves. In this work, we open an avenue for developing efficient catalysts for uranium extraction from seawater.

Piezoelectric Heterojunctions as Bacteria-Killing Bone-Regenerative Implants

Heterojunctions are widely used in energy conversion, environmental remediation, and photodetection, but have not been fully explored in regenerative medicine. In particular, piezoelectric heterojunctions have never been examined in tissue regeneration. Here the development of piezoelectric heterojunctions is shown to promote bone regeneration while eradicating pathogenic bacteria through light-cellular force-electric coupling. Specifically, an array of heterojunctions (TiO2/Bi2WO6), made of piezoelectric nanocrystals (Bi2WO6) decorating TiO2 nanowires, is fabricated as a biocompatible implant. Upon exposure to near-infrared light, the piezoelectric heterojunctions generate reactive oxygen species and heat to kill bacteria through photodynamic and photothermal therapy, respectively. Meanwhile, the mechanical forces of the stem cells grown on the implant trigger the heterojunctions to produce electric fields that further promote osteogenesis to achieve osteointegration. The heterojunctions effectively suppress postoperative recurrent infections while promoting osseointegration through the local electric fields induced by cells. Therefore, the piezoelectric heterojunctions represent a promising antibacterial tissue-regenerative implant.

Enhancement of the Piezocatalytic Response of La-Doped BiFeO3 Nanoparticles by Defects Synergy

Because of their intrinsic polarization and related properties, ferroelectrics attract significant attention to address energy transformation and environmental protection. Here, by using trivalent-ion-lanthanum doping of BiFeO3 nanoparticles (NPs), it is shown that defects and piezoelectric potential are synergized to achieve a high piezocatalytic effect for decomposing the model Rhodamine B (RhB) pollutant, reaching a record-high piezocatalytic rate of 21 360 L mol-1 min-1 (i.e., 100% RhB degradation within 20 min) that exceeds most state-of-the art ferroelectrics. The piezocatalytic Bi0.99La0.01FeO3 NPs are also demonstrated to be versatile toward various pharmaceutical pollutants with over 90% removal efficiency, making them extremely efficient piezocatalysts for water purification. It is also shown that 1% La-doping introduces oxygen vacancies and Fe2+ defects. It is thus suggested that oxygen vacancies act as both active sites and charge providers, permitting more surface adsorption sites for the piezocatalysis process, and additional charges and better energy transfer between the NPs and surrounding molecules. Furthermore, the oxygen vacancies are proposed to couple to Fe2+ to form defect dipoles, which in turn introduces an internal field, resulting in more efficient charge de-trapping and separation when added to the piezopotential. This synergistic mechanism is believed to provide a new perspective for designing future piezocatalysts with high performance.

High Tribocatalytic Performance of FeOOH Nanorods for Degrading Organic Dyes and Antibiotics

Tribocatalysis is vitally important for electrochemistry, energy conservation, and water treatment. Exploring eco-friendly and low-cost tribocatalysts with high performance is crucial for practical applications. Here, the highly efficient tribocatalytic performance of FeOOH nanorods is reported. The factors related to the tribocatalytic activity such as nanorod diameter, surface area, and surface roughness are investigated, and the diameter of the FeOOH nanorods is found to have a significant effect on their tribocatalytic performance. As a result, under ultrasonic excitation, the optimized FeOOH nanorods exhibit superior tribocatalytic degradation toward rhodamine B (RhB), acid orange 7, methylene blue, methyl orange dyes, and their mixture. The RhB and mixed dyes are effectively degraded within 20 min (k = 0.179 min-1) and 35 min (k = 0.089 min-1), respectively, with the FeOOH nanorods showing excellent reusability. Moreover, antibiotics, such as tetracycline hydrochloride, phenol, and bisphenol A are efficiently degraded. Investigation of the catalytic mechanism reveals that the friction-generated h+ as well as these yielded •OH and •O2 - active radicals participate in the catalytic reaction. This work not only shed light on the design of high-performance tribocatalyst but also demonstrates that by harvesting mechanical energy, the FeOOH nanorods are promising materials for removing organic contaminants in wastewater.

Co-catalysis strategy for low-oxidant-consumption Fenton-like chemistry: From theoretical understandings to practical applications and future guiding strategies

Recently, great effects have been made for the co-catalysis strategy to solve the bottlenecks of Fenton system. A series of co-catalysis strategies using various inorganic metal co-catalysts and organic co-catalysts have been developed in various oxidant (i.e., hydrogen peroxide (H2O2) and persulfate) systems with significantly promotion of catalytic performances and lower oxidant consumption (only 5-10 % of conventional Fenton/Fenton-like systems). However, the developments of these co-catalysis strategies from theoretical understandings to practical applications and future guiding strategies were overlooked, which was an essential problem that must be considered for the future scale-up applications of co-catalysis systems. In this paper, these co-catalysis strategies with low-oxidant-consumption characteristics have been reviewed by the comparison of their co-catalysis mechanisms, as well as their advantages and disadvantages. We also discussed the recent developments of amplifying devices based on the co-catalysis systems. The scale-up performances of co-catalysis strategies based on these amplifying devices have also been assessed. In addition, future guiding strategies for the development of co-catalysis strategy with low-oxidant-consumption characteristics have also been first time outlined by the combination of the technical-economic analysis (TEA), life cycle assessment (LCA) and machine learning (ML). Finally, the paper systematically discusses the development opportunities, technical bottlenecks and future development directions of co-catalysis strategies with the prospect of large-scale applications. Basically, this work provides a systematic review on co-catalysis strategy with low-oxidant-consumption characteristic from theoretical understandings to practical applications and future guiding strategies.

Trifunctional Graphene-Sandwiched Heterojunction-Embedded Layered Lattice Electrocatalyst for High Performance in Zn-Air Battery-Driven Water Splitting

Zn-air battery (ZAB)-driven water splitting holds great promise as a next-generation energy conversion technology, but its large overpotential, low activity, and poor stability for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) remain obstacles. Here, a trifunctional graphene-sandwiched, heterojunction-embedded layered lattice (G-SHELL) electrocatalyst offering a solution to these challenges are reported. Its hollow core-layered shell morphology promotes ion transport to Co3S4 for OER and graphene-sandwiched MoS2 for ORR/HER, while its heterojunction-induced internal electric fields facilitate electron migration. The structural characteristics of G-SHELL are thoroughly investigated using X-ray absorption spectroscopy. Additionally, atomic-resolution transmission electron microscopy (TEM) images align well with the DFT-relaxed structures and simulated TEM images, further confirming its structure. It exhibits an approximately threefold smaller ORR charge transfer resistance than Pt/C, a lower OER overpotential and Tafel slope than RuO₂, and excellent HER overpotential and Tafel slope, while outlasting noble metals in terms of durability. Ex situ X-ray photoelectron spectroscopy analysis under varying potentials by examining the peak shifts and ratios (Co2+/Co3+ and Mo4+/Mo6+) elucidates electrocatalytic reaction mechanisms. Furthermore, the ZAB with G-SHELL outperforms Pt/C+RuO2 in terms of energy density (797 Wh kg-1) and peak power density (275.8 mW cm-2), realizing the ZAB-driven water splitting.

Tunable Interlayer Interactions in Exfoliated 2D van der Waals Framework Fe(SCN)2(Pyrazine)2

2D materials can be isolated as monolayer sheets when interlayer interactions involve weak van der Waals forces. These atomically thin structures enable novel topological physics and open chemical questions of how to tune the structure and properties of the sheets while maintaining them as isolated monolayers. Here, this work investigates 2D electroactive sheets that exfoliate in solution into colloidal nanosheets, but aggregate upon oxidation, giving rise to tunable interlayer charge transfer absorption and photoluminescence. This optical behavior resembles interlayer excitons, now intensely studied due to their long-lived emission, but which remain difficult to tune through synthetic chemistry. Instead, the interlayer excitons of these framework sheets can be modulated through control of solvent, electrolyte, oxidation state, and the composition of the framework building blocks. Compared to other 2D materials, these framework sheets display the largest known interlayer binding strengths, attributable to specific orbital interactions between the sheets, and among the longest interlayer exciton lifetimes. Taken together, this study provides a microscopic basis for manipulating long-range opto-electronic behavior in van der Waals materials through molecular synthetic chemistry.

Lateral Heterostructures Fabricated via Artificial Pressure Gradient

Hydrostatic conditions are generally pursued in high-pressure research, maintained to prevent the intrinsic pressure gradient on the culets of diamond anvil cells (DACs) from introducing heterogeneity to the structure and physical properties of the regulated materials. Here, a pioneering route to fabricate lateral heterostructures is proposed via artificial pressure gradients intentionally designed in DACs. Under the tailored pressure gradients, different structural phases emerge in distinct parts of the material, resulting in the formation of heterostructures. Harnessing the polymorphic transition nature of violet phosphorus under high pressure, violet/blue and violet/black phosphorus lateral heterostructures with different electrical properties have been successfully prepared by the pressure gradient method. This achievement highlights the potential of artificial pressure gradients as a portable and universal strategy for the fabrication of lateral heterostructures, shedding new light on the preparation and regulation of lateral heterostructures across a wider range of materials.

Engineered Composite Interfacial Electric Field Boosts Piezocatalysis of Perovskite Ferroelectrics

Reducing the level of annihilation of electrons and holes is considered to be a feasible strategy to promote piezocatalytic activities. But this strategy is only achieved through cumbersome sample preparation technologies, hindering its practical applications. Herein, we introduce a simple and efficient technique, the conventional solid-state method, to engineer a composite interfacial electric field to solve this problem, and validate it in a composite piezocatalysis composed of potassium sodium niobate ((K, Na)NbO3, KNN) and multiwalled carbon nanotubes (MWCNTs). The KNN-1CNT sample, a piezocatalyst doped with 1 wt % MWCNTs, shows a degradation rate (k) of 127 × 10-3 min-1 for Rhodamine B (RhB) dye and a hydrogen peroxide (H2O2) production rate of 36 μmol/h, about 27 times more than a reported ferroelectric composite piezocatalyst. The excellent piezocatalytic activities are attributed to the good crystallinity, slightly increased oxygen vacancies, and especially the optimal composite interface electric field. Therefore, our proposed method provides a paradigm for obtaining large-scale perovskite piezocatalysts with high piezocatalytic activities.

Biomaterials based on advanced oxidation processes in tooth whitening: fundamentals, progress, and models

The increasing desire for aesthetically pleasing teeth has resulted in the widespread use of tooth whitening treatments. Clinical tooth whitening products currently rely on hydrogen peroxide formulations to degrade dental pigments through oxidative processes. However, they usually cause side effects such as tooth sensitivity and gingival irritation due to the use of high concentrations of hydrogen peroxide or long-time contact. In recent years, various novel materials and reaction patterns have been developed to tackle the issues related to H2O2-based tooth whitening. These can be broadly classified as advanced oxidation processes (AOPs). AOPs generate free radicals that have potent oxidizing properties, which can thereby increase the oxidation power and/or reduce the exposure time and can probably minimize the side effects of tooth bleaching. While there have been several reviews on clinical tooth whitening and the application of novel nanomaterials, a review based on the concept of AOPs in tooth bleaching application has not yet been conducted. This review describes the common types and mechanisms of AOPs, summarizes the latest research progress of new tooth bleaching materials based on AOPs, and proposes a model for tooth bleaching and a rate control step at the molecular level. The paper also reviews the shortcomings and suggests future development directions.

Preparation and application of wood-supported piezocatalyst with high efficiency and stability via partial hydrolysis of wood cellulose and hemicellulose with Lewis acid

The conveniently recoverable piezocatalyst with self-floating and stable performance has drawn wide attention. Herein, MoS2 was anchored on 1-cm-square eucalyptus wood blocks via a facile hydrothermal/solvothermal process to fabricate two floating piezocatalysts, i.e., MoS2/unpretreated wood (MUW) and MoS2/pretreated wood (MPW). FeCl3 solution was used as a Lewis acid to pretreat the wood through partial hydrolyzing cellulose and hemicellulose for an purpose to creat rich micropores for MoS2 loading in the wood and to form MoFe heterojunction. The piezocatalytic properties and performance of the prepared wood were systematically studied. The scanning electron microscopy confirms MoS2 was anchored on wood surface. The macroscopic photos show that MoS2 penetrated through the MPW interior whereas it was only loaded on the wood surface layer. The X-ray photoelectron spectroscopy reveals the shift of Mo 3d and S 2p, verifying the heterojunction formation of MPW. The Fourier transform infrared spectra prove the partial hydrolysis of wood matrix. In comparison to MUW, MPW had excellent piezocatalytic property, wide pH adaptability, convenient recyclability and high stability. Sildenafil and Cr6+ ions could be completely removed in 20 and 15 min, respectively, by MPW. Contrastly, the removal efficiency of sildenafil and Cr6+ by MUW was 78.6 % and 68.3 % in 20 and 15 min, respectively. After five cycles of use, the removal ratio of sildenafil was 62.4 % by MUW and 90.5 % by MPW in 20 min. The mineralization efficiency of sildenafil reached 99.2 % in 30 min by MPW, and various types of N/S-containing intermediates were effectively degraded. The electron spin resonance characterization and active species scavenging experiments displayed that e- and •O2- were major active species responsible for Cr6+ piezoreduction by MUW and MPW, while •O2- and •OH were the dominant species accounting for sildenafil degradation by MUW and MPW, respectively. And •OH was not generated in the MUW piezocatalysis process. MPW had higher piezoelectric current and lower resistance at the electron transfer interface than MUW. Conclusively, this study paves a new pathway for preparing new floating piezocatalysts with easy recyclability and high stability from biomass for wastewater treatment.

Ti3C2 quantum dots-modified oxygen-vacancy-rich BiOBr hollow microspheres toward optimized photocatalytic performance

The Ti3C2 quantum dots (QDs)/oxygen-vacancy-rich BiOBr hollow microspheres composite photocatalyst was prepared using solvothermal synthesis and electrostatic self-assembly techniques. Together, Ti3C2QDs and oxygen vacancies (OVs) enhanced photocatalytic activity by broadening light absorption and improving charge transfer and separation processes, resulting in a significant performance boost. Meanwhile, the photocatalytic efficiency of Ti3C2 QDs/BiOBr-OVs is assessed to investigate its capability for oxygen evolution and degradation of tetracycline (TC) and Rhodamine B (RhB) under visible-light conditions. The rate of oxygen production is observed to be 5.1 times higher than that of pure BiOBr-OVs, while the photocatalytic degradation rates for TC and RhB is up to 97.27% and 99.8%, respectively. The synergistic effect between Ti3C2QDs and OVs greatly enhances charge separation, leading to remarkable photocatalytic activity. Furthermore, the hollow microsphere contributes to the enhanced photocatalytic performance by facilitating multiple light scatterings and providing ample surface-active sites. The resultant Ti3C2QDs/BiOBr-OVs composite photocatalyst demonstrates significant potential for environmental applications.

Manipulating 2D Materials through Strain Engineering

This review explores the growing interest in 2D layered materials, such as graphene, h-BN, transition metal dichalcogenides (TMDs), and black phosphorus (BP), with a specific focus on recent advances in strain engineering. Both experimental and theoretical results are delved into, highlighting the potential of strain to modulate physical properties, thereby enhancing device performance. Various strain engineering methods are summarized, and the impact of strain on the electrical, optical, magnetic, thermal, and valleytronic properties of 2D materials is thoroughly examined. Finally, the review concludes by addressing potential applications and challenges in utilizing strain engineering for functional devices, offering valuable insights for further research and applications in optoelectronics, thermionics, and spintronics.

Advances in Inorganic Foam Materials Fabricated Via Blowing Strategy: A Comprehensive Review

Two-dimensional (2D) materials with excellent properties and widespread applications have been explosively investigated. However, their conventional synthetic methods exhibit concerns of limited scalability, complex purification process, and incompetence of prohibiting their restacking. The blowing strategy, characterized by gas-template, low-cost, and high-efficiency, presents a valuable avenue for the synthesis of 2D-based foam materials and thereby addresses these constraints. Whereas, its comprehensive introduction has been rarely outlined so far. This review commences with a synopsis of the blowing strategy, elucidating its development history, the statics and kinetics of the blowing process, and the choice of precursor and foaming agents. Thereafter, we dwell at length on across-the-board foams enabled by the blowing route, like BxCyNz foams, carbon foams, and diverse composite foams consisting of carbon and metal compounds. Following that, a wide-ranging evaluation of the functionality of the foam products in fields such as energy storage, electrocatalysis, adsorption, etc. is discussed, revealing their distinctive strength originated from the foam structure. Finally, after concluding the current progress, we provide some personal discussions on the existing challenges and future research priorities in this rapidly developing method.

Tandem Fields Facilitating Directional Carrier Migration in Van der Waals Heterojunction for Efficient Overall Piezo-Synthesis of H2O2

Piezo-synthesis of H2O2 utilizing sustainable mechanical energy as well as earth-abundant water and oxygen is a green, cost-effective, and promising approach. However, achieving simultaneous two-electron water oxidation reaction (2e- WOR) and two-electron oxygen reduction reaction (2e- ORR) faces huge challenges due to insufficient synergistic active sites and slow/messy carrier transfer. Herein, a novel 2D/2D van der Waals heterojunction consisting of BiOIO3 and carbon nitride (BIO/CN) is elaborately designed for highly efficient overall H2O2 piezo-synthesis. Theoretical/experimental results reveal that a Z-scheme electron transfer is formed and facilitated by the tandem interfacial electric field and the bulk piezo-polarization field. On this basis, the carriers are efficiently separated while the oxidation/reduction capacity is preserved, thus providing the strong driving force for the 2e- WOR and 2e- ORR on BIO and CN, respectively. Furthermore, the kinetic and thermodynamic processes of WOR and ORR for H2O2 synthesis improve remarkably. Therefore, BIO/CN exhibits an excellent H2O2 yield of 259.8 µM within 30 min in pure water and air atmosphere (without any sacrificial agents and aeration). This study provides a new idea on strategically controlling electron transfer toward high-efficiency H2O2 piezo-synthesis and expands the avenue for developing effective environmental purification materials.

Enhanced remediation of PFAS-metal co-contaminated soil by ceramsite supported Fe3O4-MoS2 heterojunction as a high-performance piezocatalyst

In this study, a novel piezoremediation system was developed to remediate an actual soil co-polluted by high contents of per- and polyfluoroalkyl substances (PFAS, 5725 μg/kg soil) and heavy metals (6455 mg/kg soil). Two piezocatalysts, MoS2/ceramsite (MC) and Fe3O4-MoS2/ceramsite (FMC), were synthesized using a facile hydrothermal-coprecipitation method. These two materials were employed to treat the co-contaminated soil in soil slurry environment under sonication. FMC exhibited significantly higher piezoremediation performance than MC, wherein 91.6% of PFAS, 97.8% of Cr6+ ions and 81% of total metals (Cr, Cu, Zn and Ni) were removed from the soil after 50 min of the FMC piezoremediation process. FMC also exhibited the advantages of easy separation from the slurry phase and excellent reusability. In comparison with MC, the Fe3O4-MoS2 heterojunction in FMC can stabilize MoS2 particles on the surface of ceramsite granules, promote the separation of electron/hole pairs, accelerate charge transfer, therefore enhancing piezocatalytic performance. The electron spin resonance analysis and free radical quenching tests show that •OH was the dominant oxidative radical responsible for PFAS degradation. The count of bacteria and the bacterial community structure in the treated soil can be basically restored to the initial states after 30 days of incubation under nutrient stimulation. Overall, this study not only provides a deep insight on soil remediation process, but also offers an efficient and reliable technique for simultaneous decontamination of organic and metal pollutants in soil.

MoS2@MWCNTs with Rich Vacancy Defects for Effective Piezocatalytic Degradation of Norfloxacin via Innergenerated-H2O2: Enhanced Nonradical Pathway and Synergistic Mechanism with Radical Pathway

Molybdenum disulfide (MoS2)-based materials for piezocatalysis are unsatisfactory due to their low actual piezoelectric coefficient and poor electrical conductivity. Herein, 1T/3R phase MoS2 grown in situ on multiwalled carbon nanotubes (MWCNTs) was proposed. MoS2@MWCNTs exhibited the interwoven morphology of thin nanoflowers and tubes, and the piezoelectric response of MoS2@MWCNTs was 4.07 times higher than that of MoS2 via piezoresponse force microscopy (PFM) characterization. MoS2@MWCNTs exhibited superior activity with a 91% degradation rate of norfloxacin (NOR) after actually working 24 min (as for rhodamine B, reached 100% within 18 min) by pulse-mode ultrasonic vibration-triggered piezocatalysis. It was found that piezocatalysis for removing pollutants was attributed to the synergistic effect of free radicals (•OH and O2•-) and nonfree radical (1O2, key role) pathways, together with the innergenerated-H2O2 promoting the degradation rate. 1O2 can be generated by electron transfer and energy transfer pathways. The presence of oxygen vacancies (OVs) induced the transformation of O2 to 1O2 by triplet energy transfer. The fast charge transfer in MoS2@MWCNTs heterostructure and the coexistence of sulfur vacancies and OVs enhanced charge carrier separation resulting in a prominent piezoelectric effect. This work opens up new avenues for the development of efficient piezocatalysts that can be utilized for environmental purification.

Facet-Dependent Interfacial Charge Transfer between T-Phase VS2 Nanoflakes and Rutile TiO2 Single Crystals

The hybridizations of two-dimensional (2D) metallic materials with semiconducting transition metal oxides (TMOs) register attractive heterojunctions, which can find various applications in photostimulated circumstances. In this work, we developed an ambient-pressure chemical vapor deposition method to directly grow T-VS2 on atomically smooth rutile TiO2 single crystals with different terminations and thus successfully constructed a heterojunction model of VS2/TiO2 with a well-defined clean interface. Detailed measurements with Kelvin probe force microscopy revealed the facet-dependent charge transfer occurring at the VS2/TiO2 interfaces, seeing variations not only in the amount and direction of the transferred electrons but also in the photoinduced surface potential changes and the dynamics of photogenerated charge carriers under ultraviolet irradiation. Interestingly, ultrathin T-VS2 was found with considerable magnetism at room temperature, disregarding the charge exchange with the TiO2 substrates. These results may bring deep insights into the photoinspired functionalities of the hybridized system combining metallic transition metal dichalcogenides and TMO materials.

Ultrasonic-enhanced photocatalysis through piezoelectric and cavitation effects for lignin depolymerization

Although a promising method for lignin depolymerization, photocatalysis faces the challenge of low efficiency. In this study, MoS2/ZnO heterojunction catalysts, endowed with piezocatalysis and photocatalytic capabilities, were crafted through Zn ion intercalation for the depolymerization of phenoxyphenylethanol (PP-ol) and alkali lignin. Then, the synergistic interplay between ultrasonic-induced piezoelectric fields and heterojunctions was analyzed. The amalgamation of the piezoelectric field and heterojunction in MoS2/ZnO catalysts resulted in a diminished photogenerated hole/electron recombination efficiency, thereby fostering the generation of ·OH during the reaction. This pivotal role of ·OH emerged as a crucial reactive substance, converting 95.8 % of PP-ol through β-O-4 bond breaking within a 3-h treatment. By incorporating ultrasonic, the contact probability of PP-ol with the catalyst was significantly improved, resulting in efficient conversion even with a reduced amount of acetonitrile in the solvent system (20 %). Furthermore, ultrasonic-light methods show high efficiency for depolymerizing Alkali lignin (AL), with 33.2 % of lignin undergoing depolymerization in a 4-h treatment. This treatment simultaneously reduces the molecular weight of AL and cleaves numerous chemical bonds within it. Overall, this work presents a green approach to lignin depolymerization, providing insights into the synergistic action of ultrasonic and photocatalysis.

Sheet-Isolated MoS2 Used for Dispersing Pt Nanoparticles and its Application in Methanol Fuel Cells

It is highly challenging to activate the basal plane and minimize the π-π stacking of MoS2 sheets, thus enhancing its catalytic performance. Here, we display an approach for making well-dispersed MoS2 . By using the N-doped multi-walled carbon nanotubes (NMWCNTs) as an isolation unit, the aggregation of MoS2 sheets was effectively reduced, favoring the dispersion of Pt nanoparticles (noted as Pt/NMWCNTs-isolated-MoS2 ). Excellent bifunctional catalytic performance for methanol oxidation and oxygen reduction reaction (MOR/ORR) were demonstrated by the produced Pt/NMWCNTs-isolated-MoS2 . In comparison to Pt nanoparticles supported on MoS2 (Pt/MoS2 ), the MOR activity (2314.14 mA mgpt -1 ) and stability (317.69 mA mgpt -1 after 2 h of operation) on Pt/NMWCNTs-isolatedMoS2 were 24 and 232 times higher, respectively. As for ORR, Pt/NMWCNTs-isolated-MoS2 holds large half-wave potential (0.88 V) and high stability (92.71 % after 22 h of operation). This work presents a tactic for activating the basal planes and reducing the π-π stacking of 2D materials to satisfy their applications in electrocatalysis. In addition, the proposed sheet-isolation method can be used for fabricating other 2D materials to promote the dispersion of nanoparticles, which assist its application in other fields of energy as well as the environment.

Ultrasound-Driven Non-Metallic Fenton-Active Center Construction for Extensive Chemodynamic Therapy

Chemodynamic therapy (CDT) is an emerging tumor microenvironment-responsive cancer therapeutic strategy based on Fenton/Fenton-like reactions. However, the effectiveness of CDT is subject to the slow kinetic rate and non-homogeneous distribution of H2 O2 . In this study, a conceptual non-metallic "Fenton-active" center construction strategy is proposed to enhance CDT efficiency using Bi0.44 Ba0.06 Na0.5 TiO2.97 (BNBT-6) nanocrystals. The separated charge carriers under a piezoelectric-induced electric field synchronize the oxidation of H2 O and reduction of H2 O2 , which consequently increases hydroxyl radical (·OH) yield even under low H2 O2 levels. Moreover, acceptor doping induces electron-rich oxygen vacancies to facilitate the dissociation of H2 O2 and H2 O and further promote ·OH generation. In vitro and in vivo experiments demonstrate that BNBT-6 induces extensive intracellular oxidative stress and enhances cell-killing efficiency by activating necroptosis in addition to the conventional apoptotic pathway. This study proposes a novel design approach for nanomaterials used in CDT and presents a new treatment strategy for apoptosis-resistant tumors.

An Emerging Family of Piezocatalysts: 2D Piezoelectric Materials

Piezocatalysis is an emerging technique that holds great promise for the conversion of ubiquitous mechanical energy into electrochemical energy through piezoelectric effect. However, mechanical energies in natural environment (such as wind energy, water flow energy, and noise) are typically tiny, scattered, and featured with low frequency and low power. Therefore, a high response to these tiny mechanical energies is critical to achieving high piezocatalytic performance. In comparison to nanoparticles or 1D piezoelectric materials, 2D piezoelectric materials possess characteristics such as high flexibility, easy deformation, large surface area, and rich active sites, showing more promise in future for practical applications. In this review, state-of-the-art research progresses on 2D piezoelectric materials and their applications in piezocatalysis are provided. First, a detailed description of 2D piezoelectric materials are offered. Then a comprehensive summary of the piezocatalysis technique is presented and examines the piezocatalysis applications of 2D piezoelectric materials in various fields, including environmental remediation, small-molecule catalysis, and biomedicine. Finally, the main challenges and prospects of 2D piezoelectric materials and their applications in piezocatalysis are discussed. It is expected that this review can fuel the practical application of 2D piezoelectric materials in piezocatalysis.

Integration of Single-Atom Catalyst with Z-Scheme Heterojunction for Cascade Charge Transfer Enabling Highly Efficient Piezo-Photocatalysis

Piezo-assisted photocatalysis (namely, piezo-photocatalysis), which utilizes mechanical energy to modulate spatial and energy distribution of photogenerated charge carriers, presents a promising strategy for molecule activation and reactive oxygen species (ROS) generation toward applications such as environmental remediation. However, similarly to photocatalysis, piezo-photocatalysis also suffers from inferior charge separation and utilization efficiency. Herein, a Z-scheme heterojunction composed of single Ag atoms-anchored polymeric carbon nitride (Ag-PCN) and SnO2- x is developed for efficient charge carrier transfer/separation both within the catalyst and between the catalyst and surface oxygen molecules (O2 ). As revealed by charge dynamics analysis and theoretical simulations, the synergy between the single Ag atoms and the Z-scheme heterojunction initiates a cascade electron transfer from SnO2- x to Ag-PCN and then to O2 adsorbed on Ag. With ultrasound irradiation, the polarization field generated within the piezoelectric hybrid further accelerates charge transfer and regulates the O2 activation pathway. As a result, the Ag-PCN/SnO2- x catalyst efficiently activates O2 into ·O2 - , ·OH, and H2 O2 under co-excitation of visible light and ultrasound, which are consequently utilized to trigger aerobic degradation of refractory antibiotic pollutants. This work provides a promising strategy to maneuver charge transfer dynamics for efficient piezo-photocatalysis by integrating single-atom catalysts (SACs) with Z-scheme heterojunction.