Using an Electrical Potential to Reversibly Switch Surfaces between Two States for Dynamically Controlling Cell Adhesion

Looking both ways: Electroactive biomaterials with bidirectional implications for dynamic cell-material crosstalk

Cells exist in natural, dynamic microenvironmental niches that facilitate biological responses to external physicochemical cues such as mechanical and electrical stimuli. For excitable cells, exogenous electrical cues are of interest due to their ability to stimulate or regulate cellular behavior via cascade signaling involving ion channels, gap junctions, and integrin receptors across the membrane. In recent years, conductive biomaterials have been demonstrated to influence or record these electrosensitive biological processes whereby the primary design criterion is to achieve seamless cell-material integration. As such, currently available bioelectronic materials are predominantly engineered toward achieving high-performing devices while maintaining the ability to recapitulate the local excitable cell/tissue microenvironment. However, such reports rarely address the dynamic signal coupling or exchange that occurs at the biotic-abiotic interface, as well as the distinction between the ionic transport involved in natural biological process and the electronic (or mixed ionic/electronic) conduction commonly responsible for bioelectronic systems. In this review, we highlight current literature reports that offer platforms capable of bidirectional signal exchange at the biotic-abiotic interface with excitable cell types, along with the design criteria for such biomaterials. Furthermore, insights on current materials not yet explored for biointerfacing or bioelectronics that have potential for bidirectional applications are also provided. Finally, we offer perspectives aimed at bringing attention to the coupling of the signals delivered by synthetic material to natural biological conduction mechanisms, areas of improvement regarding characterizing biotic-abiotic crosstalk, as well as the dynamic nature of this exchange, to be taken into consideration for material/device design consideration for next-generation bioelectronic systems.

Static and Dynamic: Evolving Biomaterial Mechanical Properties to Control Cellular Mechanotransduction

The extracellular matrix (ECM) is a highly dynamic system that constantly offers physical, biological, and chemical signals to embraced cells. Increasing evidence suggests that mechanical signals derived from the dynamic cellular microenvironment are essential controllers of cell behaviors. Conventional cell culture biomaterials, with static mechanical properties such as chemistry, topography, and stiffness, have offered a fundamental understanding of various vital biochemical and biophysical processes, such as cell adhesion, spreading, migration, growth, and differentiation. At present, novel biomaterials that can spatiotemporally impart biophysical cues to manipulate cell fate are emerging. The dynamic properties and adaptive traits of new materials endow them with the ability to adapt to cell requirements and enhance cell functions. In this review, an introductory overview of the key players essential to mechanobiology is provided. A biophysical perspective on the state-of-the-art manipulation techniques and novel materials in designing static and dynamic ECM-mimicking biomaterials is taken. In particular, different static and dynamic mechanical cues in regulating cellular mechanosensing and functions are compared. This review to benefit the development of engineering biomechanical systems regulating cell functions is expected.

Smart biomaterial platforms: Controlling and being controlled by cells

Across diverse research and application areas, dynamic functionality-such as programmable changes in biochemical property, in mechanical property, or in microscopic or macroscopic architecture-is an increasingly common biomaterials design criterion, joining long-studied criteria such as cytocompatibility and biocompatibility, drug release kinetics, and controlled degradability or long-term stability in vivo. Despite tremendous effort, achieving dynamic functionality while simultaneously maintaining other desired design criteria remains a significant challenge. Reversible dynamic functionality, rather than one-time or one-way dynamic functionality, is of particular interest but has proven especially challenging. Such reversible functionality could enable studies that address the current gap between the dynamic nature of in vivo biological and biomechanical processes, such as cell traction, cell-extracellular matrix (ECM) interactions, and cell-mediated ECM remodeling, and the static nature of the substrates and ECM constructs used to study the processes. This review assesses dynamic materials that have traditionally been used to control cell activity and static biomaterial constructs, experimental and computational techniques, with features that may inform continued advances in reversible dynamic materials. Taken together, this review presents a perspective on combining the reversibility of smart materials and the in-depth dynamic cell behavior probed by static polymers to design smart bi-directional ECM platforms that can reversibly and repeatedly communicate with cells.

A Dual-Responsive Peptide-Based Smart Biointerface with Biomimetic Adhesive Behaviors for Bacterial Isolation

As mimics of the extracellular matrix, surfaces with the capability of capturing and releasing specific cells in a smart and controllable way play an important role in bacterial isolation. In this work, we fabricated a dual-responsive smart biointerface via peptide self-assembly and reversible covalent chemistry biomimetic adhesion behavior for bacterial isolation. Compared with that of the biointerface based on a single reversible covalent bond, the bacterial enrichment efficiency obtained in this work was 2.3 times higher. Furthermore, the release of bacteria from the surface could be achieved by dual responsiveness (sugar and enzyme), which makes the biointerface more adaptable and compatible under different conditions. Finally, the reusability of the biointerface was verified via peptide self-assembly and the regenerated smart biointerface still showed good bacterial capture stability and excellent release efficiency, which was highly anticipated to be more widely applied in biomaterial science and biomedicine in the future.

Engineering Photoresponsive Ligand Tethers for Mechanical Regulation of Stem Cells

Regulating stem cell functions by precisely controlling the nanoscale presentation of bioactive ligands has a substantial impact on tissue engineering and regenerative medicine but remains a major challenge. Here it is shown that bioactive ligands can become mechanically "invisible" by increasing their tether lengths to the substrate beyond a critical length, providing a way to regulate mechanotransduction without changing the biochemical conditions. Building on this finding, light switchable tethers are rationally designed, whose lengths can be modulated reversibly by switching a light-responsive protein, pdDronpa, in between monomer and dimer states. This allows the regulation of the adhesion, spreading, and differentiation of stem cells by light on substrates of well-defined biochemical and physical properties. Spatiotemporal regulation of differential cell fates on the same substrate is further demonstrated, which may represent an important step toward constructing complex organoids or mini tissues by spatially defining the mechanical cues of the cellular microenvironment with light.

A versatile pH-responsive peptide based dynamic biointerface for tracking bacteria killing and infection resistance

Herein we reported a versatile dynamic biointerface based on pH-responsive peptide self-assembly and disassembly to capture the bacteria to avoid bacteria further infected tissue around that can release peptides from the surface in a slightly acidic environment to kill the bacteria with the specificity. The exposed biointerface still presented infection resistance.

A Programmable Toolkit to Dynamically Signal Cells Using Peptide Strand Displacement

The native extracellular matrix communicates and interacts with cells by dynamically displaying signals to control their behavior. Mimicking this dynamic environment in vitro is essential in order to unravel how cell-matrix interactions guide cell fate. Here, we present a synthetic platform for the temporal display of cell-adhesive signals using coiled-coil peptides. By designing an integrin-engaging coiled-coil pair to have a toehold (unpaired domain), we were able to use a peptide strand displacement reaction to remove the cell cue from the surface. This allowed us to test how the user-defined display of RGDS ligands at variable duration and periodicity of ligand exposure influence cell spreading degree and kinetics. Transient display of α_Vβ₃-selective ligands instructed fibroblast cells to reversibly spread and contract in response to changes in ligand exposure over multiple cycles, exhibiting a universal kinetic response. Also, cells that were triggered to spread and contract repeatedly exhibited greater enrichment of integrins in focal adhesions versus cells cultured on persistent RGDS-displaying surfaces. This dynamic platform will allow us to uncover the molecular code by which cells sense and respond to changes in their environment and will provide insights into ways to program cellular behavior.

The impact of antifouling layers in fabricating bioactive surfaces

Bioactive surfaces modified with functional peptides are critical for both fundamental research and practical application of implant materials and tissue repair. However, when bioactive molecules are tethered on biomaterial surfaces, their functions can be compromised due to unwanted fouling (mainly nonspecific protein adsorption and cell adhesion). In recent years, researchers have continuously studied antifouling strategies to obtain low background noise and effectively present the function of bioactive molecules. In this review, we describe several commonly used antifouling strategies and analyzed their advantages and drawbacks. Among these strategies, antifouling molecules are widely used to construct the antifouling layer of various bioactive surfaces. Subsequently, we summarize various structures of antifouling molecules and their surface grafting methods and characteristics. Application of these functionalized surfaces in microarray, biosensors, and implants are also introduced. Finally, we discuss the primary challenges associated with antifouling layers in fabricating bioactive surfaces and provide prospects for the future development of this field. STATEMENT OF SIGNIFICANCE: The nonspecific protein adsorption and cell adhesion will cause unwanted background "noise" on the surface of biological materials and detecting devices and compromise the performance of functional molecules and, therefore, impair the performance of materials and the sensitivity of devices. In addition, the selection of antifouling surfaces with proper chain length and high grafting density is also of great importance and requires further studies. Otherwise, the surface-tethered bioactive molecules may not function in their optimal status or even fail to display their functions. Based on these two critical issues, we summarize antifouling molecules with different structures, variable grafting methods, and diverse applications in biomaterials and biomedical devices reported in literature. Overall, we expect to shed some light on choosing the appropriate antifouling molecules in fabricating bioactive surfaces.

Enhanced cellular osteogenic differentiation on CoFe2O4/P(VDF-TrFE) nanocomposite coatings under static magnetic field

Cellular responses can be regulated and manipulated through combining stimuli-responsive biomaterial with external stimulus. In this present, the magneto-responsive CoFe₂O₄/P(VDF-TrFE) nanocomposite coatings were designed to understand cell behaviors of preosteoblasts, as well as get insight into the underlying mechanism of osteogenic differentiation under static magnetic field (SMF). CoFe₂O₄/P(VDF-TrFE) nanocomposite coatings with differential magnetic property (low, medium and high magnetization) were prepared by incorporation of different mass fraction of CoFe₂O₄ nanoparticles (6%, 13 %, 20 %) into P(VDF-TrFE) matrix. Cell experiments indicated that all nanocomposite coatings with the assistance of SMF could promote the cell attachment, proliferation and osteogenic differentiation of MC3T3-E1 cells. Among different nanocomposite coatings, low magnetization coating (6%) showed a higher ALP activity and gene expression of Runx2, Col-I, OCN. Molecular biology assays demonstrated that the combination of nanocomposite coatings and SMF could significantly up-regulate the expression level of α2β1 integrin and p-ERK. Whereas, the addition of inhibitor U0126 down-regulated sharply the expression level of p-ERK, which indicated that cellular osteogenic differentiation of MC3T3-E1 cells was governed through α2β1 integrin-mediated MEK/ERK signaling pathways during CoFe₂O₄/P(VDF-TrFE) nanocomposite coatings were combined with SMF. This work provided a promising strategy to enhance cellular osteogenic differentiation through a remote-control manner, which exhibited great potential in the application of bone tissue repair and regeneration.

Magnetic-Field-Assisted Cellular Osteogenic Differentiation on Magnetic Zinc Ferrite Coatings via MEK/ERK Signaling Pathways

Combining an external stimulus and stimuli-responsive biomaterials can regulate cellular behaviors. In this paper, a magneto-responsive zinc ferrite (ZnFe₂O₄) coating was designed to gain insight into the preosteoblasts behaviors and osteogenic differentiation mechanism under a static magnetic field (SMF). ZnFe₂O₄ coatings with distinct magnetization (low, medium, and high magnetizations) were prepared by being annealed at different temperatures. Cellular biology experiments indicated that all ZnFe₂O₄ coatings with the assistance of SMF could promote the early proliferation (3 days) and osteogenic differentiation of MC3T3-E1 cells. Among different ZnFe₂O₄ samples, low and medium magnetization of ZnFe₂O₄ showed a higher osteogenesis-related gene expression (Runx2, Col-I, OCN) than that of high magnetization ZnFe₂O₄ under SMF, while cellular adhesion and proliferation cultured on different ZnFe₂O₄ samples presented insignificant differences. Molecular biology tests showed that the combination of ferromagnetic ZnFe₂O₄ and SMF could significantly improve the expression level of α2β1 integrin and p-ERK. However, the addition of the inhibitor U0126 sharply reduced the expression level of p-ERK, which indicated that α2β1 integrin-mediated MEK/ERK signaling pathways play a key role in SMF-assisted cellular osteogenic differentiation over ZnFe₂O₄ coatings. This work provides an attractive strategy to enhance cellular osteogenic differentiation in a remote-control way, which exhibited enormous potential in the field of bone tissue repair and regeneration.

Photodynamic Pattern Memory Surfaces with Responsive Wrinkled and Fluorescent Patterns

Reversible pattern systems, namely pattern memory surfaces, possessing tunable morphology play an important role in the development of smart materials; however, the construction of these surfaces is still extensively challenging because of complicated methodologies or chemical reactions. Herein, a functionalized basement is strategically integrated with a multi-responsive supramolecular network based on hydrogen bonding between aggregation-induced emission luminogens (AIEgens) and copolymers containing amidogen (poly(St-co-Dm) to establish a bilayer system for near-infrared (NIR)-driven memory dual-pattern, where both the fluorescence emission and wrinkled structures can be concurrently regulated by a noninvasive NIR input. The motion of the AIEgens and photo-to-thermal expansion of the modified base allow temporal erasing of the fluorescent wrinkling patterns. Meanwhile, when exposed to 365 nm UV radiation, the fluorescent patterns can be independently regulated through photocyclization. The fluorescent wrinkling pattern presented herein is successfully demonstrated to promote the level of information security and capacity. This strategy provides a brand-new approach for the development of smart memory interfaces.

Integrin-Targeting Peptides for the Design of Functional Cell-Responsive Biomaterials

Integrins are a family of cell surface receptors crucial to fundamental cellular functions such as adhesion, signaling, and viability, deeply involved in a variety of diseases, including the initiation and progression of cancer, of coronary, inflammatory, or autoimmune diseases. The natural ligands of integrins are glycoproteins expressed on the cell surface or proteins of the extracellular matrix. For this reason, short peptides or peptidomimetic sequences that reproduce the integrin-binding motives have attracted much attention as potential drugs. When challenged in clinical trials, these peptides/peptidomimetics let to contrasting and disappointing results. In the search for alternative utilizations, the integrin peptide ligands have been conjugated onto nanoparticles, materials, or drugs and drug carrier systems, for specific recognition or delivery of drugs to cells overexpressing the targeted integrins. Recent research in peptidic integrin ligands is exploring new opportunities, in particular for the design of nanostructured, micro-fabricated, cell-responsive, stimuli-responsive, smart materials.

Turning Cell Adhesions ON or OFF with High Spatiotemporal Precision Using the Green Light Responsive Protein CarH

Spatiotemporal control of integrin-mediated cell adhesions to extracellular matrix regulates cell behavior with has numerous implications for biotechnological applications. In this work, two approaches for regulating cell adhesions in space and time with high precision are reported, both of which utilize green light. In the first design, CarH, which is a tetramer in the dark, is used to mask cRGD adhesion-peptides on a surface. Upon green light illumination, the CarH tetramer dissociates into its monomers, revealing the adhesion peptide so that cells can adhere. In the second design, the RGD motif is incorporated into the CarH protein tetramer such that cells can adhere to surfaces functionalized with this protein. The cell adhesions can be disrupted with green light, due to the disassembly of the CarH-RGD protein. Both designs allow for photoregulation with noninvasive visible light and open new possibilities to investigate the dynamical regulation of cell adhesions in cell biology.

Functionalized Silicon Electrodes in Electrochemistry

Avoiding the growth of SiO_x has been an enduring task for the use of silicon as an electrode material in dynamic electrochemistry. This is because electrochemical assays become unstable when the SiO_x levels change during measurements. Moreover, the silicon electrode can be completely passivated for electron transfer if a thick layer of insulating SiO_x grows on the surface. As such, the field of silicon electrochemistry was mainly developed by electron-transfer studies in nonaqueous electrolytes and by applications employing SiO_x-passivated silicon-electrodes where no DC currents are required to cross the electrode/electrolyte interface. A solution to this challenge began by functionalizing Si-H electrodes with monolayers based on Si-O-Si linkages. These monolayers have proven very efficient to avoid SiO_x formation but are not stable for a long-term operation in aqueous electrolytes due to hydrolysis. It was only with the development of self-assembled monolayers based on Si-C linkages that a reliable protection against SiO_x formation was achieved, particularly with monolayers based on α,ω-dialkynes. This review discusses in detail how this surface chemistry achieves such protection, the electron-transfer behavior of these monolayer-modified silicon surfaces, and the new opportunities for electrochemical applications in aqueous solution.

Multistimulus Responsive Biointerfaces with Switchable Bioadhesion and Surface Functions

Stimuli-responsive biointerfaces can serve as dynamic tools for modulation of biointerfacial interactions. Considering the complexity of biological environments, surfaces with multistimulus responsive switchable bioactivity are of great interest. In the work reported herein, a multistimulus responsive biointerface with on-off switchable bioadhesion (protein adsorption, bacterial adhesion, and cell adhesion) and surface functions in response to change in temperature, pH, or sugar content is developed. This surface is based on a silicon modified with a copolymer containing a thermoresponsive component (poly(N-isopropylacrylamide)) and a component, phenylboronic acid, that can form pH-responsive and sugar-responsive dynamic boronate ester bonds with diol-containing molecules. It is shown that biointeractions including protein adsorption and release, bacteria and cell attachment and detachment on this surface can be regulated by changing temperature, pH, and sugar content of the medium, either individually or all three simultaneously. Furthermore, this surface can switch between two different functions, namely between killing and releasing bacteria, by introduction of a diol-containing biocidal compound. Compared to switchable surfaces that are responsive to only one stimulus, our multistimulus responsive surface is better adapted to respond to the multifunctional complexities of the biological environment and thus has potential for use in numerous biomedical and biotechnology applications.

Photo-Irresponsive Molecule-Amplified Cell Release on Photoresponsive Nanostructured Surfaces

Cell manipulation has raised extensive concern owing to its underlying applications in numerous biological situations such as cell-matrix interaction, tissue engineering, and cell-based diagnosis. Generally, light is considered as a superior candidate for manipulating cells (e.g., cell release) due to their high spatiotemporal precision and non-invasion. However, it remains a big challenge to release cells with high efficiency due to their potential limitation of the light-triggered wettability transition on photoresponsive surfaces. In this study, we report a photoresponsive spiropyran-coated nanostructured surface that enables highly efficient release of cancer cells, amplified by the introduction of a photo-irresponsive molecule. On one hand, structural recognition stems from topological interaction between nanofractal surfaces and the protrusions of cancer cells. On the other, molecular recognition can be amplified by a photo-irresponsive and hydrophilic molecule by reducing the steric hindrance of photoresponsive components and resisting nonspecific cell adhesion. Therefore, this study may afford a novel avenue for developing advanced smart materials for high-quality biological analysis and clinical diagnosis.

Spatio-Temporal Control of Cell Adhesion: Toward Programmable Platforms to Manipulate Cell Functions and Fate

Biophysical and biochemical signals of material surfaces potently regulate cell functions and fate. In particular, micro- and nano-scale patterns of adhesion signals can finely elicit and affect a plethora of signaling pathways ultimately affecting gene expression, in a process known as mechanotransduction. Our fundamental understanding of cell-material signals interaction and reaction is based on static culturing platforms, i.e., substrates exhibiting signals whose configuration is time-invariant. However, cells in-vivo are exposed to arrays of biophysical and biochemical signals that change in time and space and the way cells integrate these might eventually dictate their behavior. Advancements in fabrication technologies and materials engineering, have recently enabled the development of culturing platforms able to display patterns of biochemical and biophysical signals whose features change in time and space in response to external stimuli and according to selected programmes. These dynamic devices proved to be particularly helpful in shedding light on how cells adapt to a dynamic microenvironment or integrate spatio-temporal variations of signals. In this work, we present the most relevant findings in the context of dynamic platforms for controlling cell functions and fate in vitro. We place emphasis on the technological aspects concerning the fabrication of platforms displaying micro- and nano-scale dynamic signals and on the physical-chemical stimuli necessary to actuate the spatio-temporal changes of the signal patterns. In particular, we illustrate strategies to encode material surfaces with dynamic ligands and patterns thereof, topographic relieves and mechanical properties. Additionally, we present the most effective, yet cytocompatible methods to actuate the spatio-temporal changes of the signals. We focus on cell reaction and response to dynamic changes of signal presentation. Finally, potential applications of this new generation of culturing systems for in vitro and in vivo applications, including regenerative medicine and cell conditioning are presented.

Dynamic Substrates for Cell Biology

The interactions of adherent cells with their insoluble extracellular matrices are complex and challenging to study in the laboratory. Approaches from interface science have been important to preparing models of the biological matrix wherein discreet ligands are immobilized and interact with cellular receptors. A recent theme has been to develop dynamic substrates, where the activities of immobilized ligands can be modulated in real-time during cell culture. This short opinion reviews the strategies to manipulate ligand activity, highlights recent work that has advanced the field and discusses the applications that have been enabled. This work suggests that dynamic substrates will continue to find important uses in basic and applied biointerfaces.

Harnessing electrostatic catalysis in single molecule, electrochemical and chemical systems: a rapidly growing experimental tool box

Static electricity is central to many day-to-day practical technologies, from separation methods in the recycling of plastics to transfer inks in photocopying, but the exploration of how electrostatics affects chemical bonding is still in its infancy. As shown in the Companion Tutorial, the presence of an appropriately-oriented electric field can enhance the resonance stabilization of transition states by lowering the energy of ionic contributors, and the effect that follows on reaction barriers can be dramatic. However, the electrostatic effects are strongly directional and harnessing them in practical experiments has proven elusive until recently. This tutorial outlines some of the experimental platforms through which we have sought to translate abstract theoretical concepts of electrostatic catalysis into practical chemical technologies. We move step-wise from the nano to the macro, using recent examples drawn from single-molecule STM experiments, surface chemistry and pH-switches in solution chemistry. The experiments discussed in the tutorial will educate the reader in some of the viable solutions to gain control of the orientation of reagents in that field; from pH-switchable bond-dissociations using charged functional groups to the use of surface chemistry and surface-probe techniques. All of these recent works provide proof-of-concept of electrostatic catalysis for specific sets of chemical reactions. They overturn the long-held assumption that static electricity can only affect rates and equilibrium position of redox reactions, but most importantly, they provide glimpses of the wide-ranging potential of external electric fields for controlling chemical reactivity and selectivity.

Dual-Responsive Self-Assembled Monolayer for Specific Capture and On-Demand Release of Live Cells

We report a dual-responsive self-assembled monolayer (SAM) on a well-defined rough gold substrate for dynamic capture and release of live cells. By incorporating 5'-triphosphate (ATP) aptamer into a SAM, we can accurately isolate specific cell types and subsequently release captured cells at either population or desired-group (or even single-cell) levels. On one hand, the whole SAMs can be disassembled through addition of ATP solution, leading to the entire release of the captured cells from the supported substrate. On the other hand, desired cells can be selectively released using near-infrared light irradiation, with relatively high spatial and temporal precision. The proposed dual-responsive cell capture-and-release system is biologically friendly and is reusable with another round of modification, showing great usefulness in cancer diagnosis and molecular analysis.

About Chemical Strategies to Fabricate Cell-Instructive Biointerfaces with Static and Dynamic Complexity

Properly functioning cell-instructive biointerfaces are critical for healthy integration of biomedical devices in the body and serve as decisive tools for the advancement of our understanding of fundamental cell biological phenomena. Studies are reviewed that use covalent chemistries to fabricate cell-instructive biointerfaces. These types of biointerfaces typically result in a static presentation of predefined cell-instructive cues. Chemically defined, but dynamic cell-instructive biointerfaces introduce spatiotemporal control over cell-instructive cues and present another type of biointerface, which promises a more biomimetic way to guide cell behavior. Therefore, strategies that offer control over the lateral sorting of ligands, the availability and molecular structure of bioactive ligands, and strategies that offer the ability to induce physical, chemical and mechanical changes in situ are reviewed. Specific attention is paid to state-of-the-art studies on dynamic, cell-instructive 3D materials. Future work is expected to further deepen our understanding of molecular and cellular biological processes investigating cell-type specific responses and the translational steps toward targeted in vivo applications.

Surface-modified polymers for cardiac tissue engineering

Cardiovascular disease (CVD), leading to myocardial infarction and heart failure, is one of the major causes of death worldwide. The physiological system cannot significantly regenerate the capabilities of a damaged heart. The current treatment involves pharmacological and surgical interventions; however, less invasive and more cost-effective approaches are sought. Such new approaches are developed to induce tissue regeneration following injury. Hence, regenerative medicine plays a key role in treating CVD. Recently, the extrinsic stimulation of cardiac regeneration has involved the use of potential polymers to stimulate stem cells toward the differentiation of cardiomyocytes as a new therapeutic intervention in cardiac tissue engineering (CTE). The therapeutic potentiality of natural or synthetic polymers and cell surface interactive factors/polymer surface modifications for cardiac repair has been demonstrated in vitro and in vivo. This review will discuss the recent advances in CTE using polymers and cell surface interactive factors that interact strongly with stem cells to trigger the molecular aspects of the differentiation or formulation of cardiomyocytes for the functional repair of heart injuries or cardiac defects.

Near-infrared light-responsive dynamic wrinkle patterns

Dynamic micro/nanopatterns provide an effective approach for on-demand tuning of surface properties to realize a smart surface. We report a simple yet versatile strategy for the fabrication of near-infrared (NIR) light-responsive dynamic wrinkles by using a carbon nanotube (CNT)-containing poly(dimethylsiloxane) (PDMS) elastomer as the substrate for the bilayer systems, with various functional polymers serving as the top stiff layers. The high photon-to-thermal energy conversion of CNT leads to the NIR-controlled thermal expansion of the elastic CNT-PDMS substrate, resulting in dynamic regulation of the applied strain (ε) of the bilayer system by the NIR on/off cycle to obtain a reversible wrinkle pattern. The switchable surface topological structures can transfer between the wrinkled state and the wrinkle-free state within tens of seconds via NIR irradiation. As a proof-of-concept application, this type of NIR-driven dynamic wrinkle pattern was used in smart displays, dynamic gratings, and light control electronics.

On-Demand Modulation of Bacterial Cell Fates on Multifunctional Dynamic Substrates

This paper reports unprecedented dynamic surfaces based on zwitterionic low-density self-assembled monolayers (LDSAMs) of alkanethiolates on gold, which integrate three interconvertible states-bacteria-adherable, bactericidal, and nonfouling states-through electrical modulations. The conformations of alkanethiolates were electrically modulated to generate zwitterionic, anionic, and cationic surfaces, which responded differently to bacteria and determined the fate of bacteria. Furthermore, the reversible switching of multifunctions of the surface was realized for killing bacteria and subsequently releasing dead bacteria from the surface. For practical application of our strategy, we examined the selective antibacterial effect of our surface for eradication of mycoplasma contaminants in contaminated mammalian cell cultures.

Mixed Copolymer Adlayers Allowing Reversible Thermal Control of Single Cell Aspect Ratio

Dynamic guidance of living cells is achieved by fine-tuning and spatiotemporal modulation on artificial polymer layers enabling reversible peptide display. Adjustment of surface composition and interactions is obtained by coadsorption of mixed poly(lysine) derivatives, grafted with either repellent PEG, RGD adhesion peptides, or T-responsive poly(N-isopropylacrylamide) strands. Deposition of mixed adlayers provides a straightforward mean to optimize complex substrates, which is here implemented to achieve (1) thermal control of ligand accessibility and (2) adjustment of relative adhesiveness between adjacent micropatterns, while preserving cell attachment during thermal cycles. The reversible polarization of HeLa cells along orthogonal stripes mimics guidance along natural matrices.

Manipulating cell fate: dynamic control of cell behaviors on functional platforms

We review the recent advances and new horizons in the dynamic control of cell behaviors on functional platforms and their applications.

Electronic Effects on Room-Temperature, Gas-Phase C-H Bond Activations by Cluster Oxides and Metal Carbides: The Methane Challenge

This Perspective discusses a story of one molecule (methane), a few metal-oxide cationic clusters (MOCCs), dopants, metal-carbide cations, oriented-electric fields (OEFs), and a dizzying mechanistic landscape of methane activation! One mechanism is hydrogen atom transfer (HAT), which occurs whenever the MOCC possesses a localized oxyl radical (M-O^•). Whenever the radical is delocalized, e.g., in [MgO]_n^•+ the HAT barrier increases due to the penalty of radical localization. Adding a dopant (Ga₂O₃) to [MgO]₂^•+ localizes the radical and HAT transpires. Whenever the radical is located on the metal centers as in [Al₂O₂]^•+ the mechanism crosses over to proton-coupled electron transfer (PCET), wherein the positive Al center acts as a Lewis acid that coordinates the methane molecule, while one of the bridging oxygen atoms abstracts a proton, and the negatively charged CH₃ moiety relocates to the metal fragment. We provide a diagnostic plot of barriers vs reactants' distortion energies, which allows the chemist to distinguish HAT from PCET. Thus, doping of [MgO]₂^•+ by Al₂O₃ enables HAT and PCET to compete. Similarly, [ZnO]^•+ activates methane by PCET generating many products. Adding a CH₃CN ligand to form [(CH₃CN)ZnO]^•+ leads to a single HAT product. The CH₃CN dipole acts as an OEF that switches off PCET. [MC]⁺ cations (M = Au, Cu) act by different mechanisms, dictated by the M⁺-C bond covalence. For example, Cu⁺, which bonds the carbon atom mostly electrostatically, performs coupling of C to methane to yield ethylene, in a single almost barrier-free step, with an unprecedented atomic choreography catalyzed by the OEF of Cu⁺.

Remote Control of Multimodal Nanoscale Ligand Oscillations Regulates Stem Cell Adhesion and Differentiation

Cellular adhesion is regulated by the dynamic ligation process of surface receptors, such as integrin, to adhesive motifs, such as Arg-Gly-Asp (RGD). Remote control of adhesive ligand presentation using external stimuli is an appealing strategy for the temporal regulation of cell-implant interactions in vivo and was recently demonstrated using photochemical reaction. However, the limited tissue penetration of light potentially hampers the widespread applications of this method in vivo. Here, we present a strategy for modulating the nanoscale oscillations of an integrin ligand simply and solely by adjusting the frequency of an oscillating magnetic field to regulate the adhesion and differentiation of stem cells. A superparamagnetic iron oxide nanoparticle (SPION) was conjugated with the RGD ligand and anchored to a glass substrate by a long flexible poly(ethylene glycol) linker to allow the oscillatory motion of the ligand to be magnetically tuned. In situ magnetic scanning transmission electron microscopy and atomic force microscopy imaging confirmed the nanoscale motion of the substrate-tethered RGD-grafted SPION. Our findings show that ligand oscillations under a low oscillation frequency (0.1 Hz) of the magnetic field promoted integrin-ligand binding and the formation and maturation of focal adhesions and therefore the substrate adhesion of stem cells, while ligands oscillating under high frequency (2 Hz) inhibited integrin ligation and stem cell adhesion, both in vitro and in vivo. Temporal switching of the multimodal ligand oscillations between low- and high-frequency modes reversibly regulated stem cell adhesion. The ligand oscillations further induced the stem cell differentiation and mechanosensing in the same frequency-dependent manner. Our study demonstrates a noninvasive, penetrative, and tunable approach to regulate cellular responses to biomaterials in vivo. Our work not only provides additional insight into the design considerations of biomaterials to control cellular adhesion in vivo but also offers a platform to elucidate the fundamental understanding of the dynamic integrin-ligand binding that regulates the adhesion, differentiation, and mechanotransduction of stem cells.

Electro-responsive polyelectrolyte-coated surfaces

The anchoring of polymer chains at solid surfaces is an efficient way to modify interfacial properties like the stability and rheology of colloidal dispersions, lubrication and biocompatibility. Polyelectrolytes are good candidates for the building of smart materials, as the polyion chain conformation can often be tuned by manipulation of different physico-chemical variables. However, achieving efficient and reversible control of this process represents an important technological challenge. In this regard, the application of an external electrical stimulus on polyelectrolytes seems to be a convenient control strategy, for several reasons. First, it is relatively easy to apply an electric field to the material with adequate spatiotemporal control. In addition, in contrast to chemically induced changes, the molecular response to a changing electric field occurs relatively quickly. If the system is properly designed, this response can then be used to control the magnitude of surface properties. In this work we discuss the effect of an external electric field on the adhesion and lubrication properties of several polyelectrolyte-coated surfaces. The influence of the applied field is investigated at different pH and salt conditions, as the polyelectrolyte conformation is sensitive to these variables. We show that it is possible to fine tune friction and adhesion using relatively low applied fields.

Simple and Facile Approach To Create Charge Reversible Pores via Hydrophobic Anchoring of Ionic Amphiphiles

Mesoporous silica-based charge reversal systems have gained significant attention in recent years due to a variety of applications such as drug delivery, dye adsorption, catalysis, chromatography, etc. Such systems often use covalent strategies to immobilize functional groups on the silica scaffold. However, lack of dynamism, modularity, and postsynthetic flexibility associated with covalent routes limit their wider applicability. Alternatively, supramolecular routes are gaining increased attention owing to their ability to overcome these limitations. Here, we introduce a simple and facile noncovalent design for a highly reversible assembly of charged amphiphiles within mesopores. Hexyl pendant groups were covalently attached to the surface to provide hydrophobic anchoring for charged amphiphiles to enable facile switching of surface charge of the mesoporous silica. These charge-switchable surfaces were used for fast and selective adsorption of dyes from aqueous solutions.

Self-assembled supramolecular polymers with tailorable properties that enhance cell attachment and proliferation

Self-assembled supramolecular scaffolds, a combination of noncovalent interactions within a biocompatible polymer substrate, can be used for efficient construction of highly-controlled self-organizing hierarchical structures; these newly-developed biomaterials exhibit excellent mechanical properties, tunable surface hydrophilicity, low cytotoxicity and high biodegradability, making them highly attractive for tissue engineering and regenerative medicine applications. Herein, we demonstrate a novel supramolecular poly(ε-caprolactone) (PCL) containing self-complementary sextuple hydrogen-bonded uracil-diamidopyridine (U-DPy) moieties, which undergoes spontaneous self-assembly to form supramolecular polymer networks. Inclusion of various U-DPy contents enhanced the mechanical strength and viscosities of the resulting materials by up to two orders of magnitude compared to control PCL. Surface wettability and morphological studies confirmed physically-crosslinked films can be readily tailored to provide the desired surface properties. Cell viability assays indicated the excellent in vitro biocompatibility of U-DPy-functionalized substrates and indicate the potential of these materials for various biomedical applications. More importantly, mouse fibroblast NIH/3T3 cells cultured on these substrates displayed a more elongated cell morphology and had substantially higher cell densities than cells seeded on control PCL substrate, which indicates that introduction of U-DPy moieties into polymer matrixes could be used to create tissue culture surfaces that enhance cell attachment and proliferation. This new system is suggested as a potential route towards the practical realization of next-generation tissue-engineering scaffolds.

STATEMENT OF SIGNIFICANCE

In this study, we report a significant breakthrough in development of self-assembled supramolecular polymers to form well-defined scaffolds through self-complementary hydrogen-bonding interactions. These newly developed materials exhibited extremely good mechanical properties, fine-tunable hydrophilic characteristics and excellent biocompatibility due to hydrogen-bond-induced physical cross-linking. Importantly, cell adhesion and proliferation assays indicated that these substrates efficiently promoted the growth of mouse embryonic fibroblasts NIH/3T3 cells in vitro. Thus, this finding provides a simple and effective route for the development of next-generation tissue-engineering scaffolds that have improved mechanical properties, increased surface hydrophilicity and can enhance the growth and biological activity of adherent cells.

Light-Triggered Specific Cancer Cell Release from Cyclodextrin/Azobenzene and Aptamer-Modified Substrate

Cell adhesion behaviors of stimuli-responsive surfaces have attracted significant attention for their potential biomedical applications. Distinct from temperature and pH stimuli, photoswitching avoids the extra input of thermal energy or chemicals. Herein, we designed a novel reusable cyclodextrin (CD)-modified surface to realize photoswitched specific cell release utilizing host-guest interactions between CD and azobenzene. The azobenzene-grafted specific cell capture agent was assembled onto the CD-modified surface to form a smart surface controlling cell adhesion by light radiation. After UV light irradiation, the azobenzene switched from trans- to cis-isomers, and the cis-azobenzene was not recognized by CD due to the unmatched host-guest pairs; thus, the captured MCF-7 cells could be released. Light-triggered specific cancer cell release with high efficiency may afford a smart surface with significant potential applications for the isolation and analysis of circulating tumor cells.