Site-Selective Synthesis of Janus-type Metal-Organic Framework Composites

Temperature-Sensitive Janus Particles PEG/SiO2/PNIPAM-PEA: Applications in Foam Stabilization and Defoaming

The current study presents a scalable approach for the preparation of temperature-responsive PEG/SiO2/PNIPAM-PEA Janus particles and, for the first time, investigates their potential applications in stabilizing foam and defoaming by adjusting the temperature. The method utilizes a (W1 + O)/W2 emulsion system, which incorporates appropriate surfactants to stabilize the emulsion and prevent rapid dissolution of the hydrophilic triblock polymer PEG-b-PTEPM-b-PNIPAM in water. The PEG/SiO2/PNIPAM-PEA Janus particles with temperature-responsive characteristics were synthesized in a single step that combined the sol-gel reaction and photoinduced free radical polymerization. The contact angle of the hydrophilic PEG/SiO2/PNIPAM surface was measured to be 54.7 ± 0.1°, while the contact angle of the hydrophobic PEA surface was found to be 122.4 ± 0.1°. By incorporating PEG/SiO2/PNIPAM-PEA Janus particles at a temperature of 25 °C, the foam's half-life is significantly prolonged from 42 s to nearly 30 min. However, with an increase in temperature to 50 °C, the foam's half-life rapidly diminished to only 44 s. This innovative application effectively enhances foam stabilization at low temperatures and facilitates the rapid dissipation of foam at high temperatures.

Double Immobilized Superhydrophobic and Lubricated Slippery Surface with Antibacterial and Antifouling Properties

A "double immobilized" superhydrophobic and lubricated slippery surface was prepared by simultaneously immobilizing lubricating oil and bactericide molecules. The coordination function of metal organic frameworks (MOFs) was utilized to immobilize trimesic acid, a fungicide, as a ligand of the MOF by the cathodic electrodeposition technique. Aminated silicone oil was used as a lubricating oil and was immobilized to the superhydrophobic MOF film by the curing reaction with isocyanates. This technique is a facile strategy to conductive substrates for fabricating superhydrophobic and lubricated slippery surfaces with satisfactory antibacterial and antifouling properties.

Versatile synthesis of metal-compound based mesoporous Janus nanoparticles

The construction of mesoporous Janus nanoparticles (mJNPs) with controllable components is of great significance for the development of sophisticated nanomaterials with synergistically enhanced functionalities and applications. However, the compositions of reported mJNPs are mainly the functionally inert SiO₂ and polymers. The universal synthesis of metal-compound based mJNPs with abundant functionalities is urgently desired, but remains a substantial challenge. Herein, we present a hydrophilicity mediated interfacial selective assembly strategy for the versatile synthesis of metal-compound based mJNPs. Starting from the developed silica-based mJNPs with anisotropic dual-surface of hydrophilic SiO₂ and hydrophobic organosilica, metal precursor can selectively deposit onto the hydrophilic SiO₂ subunit to form the metal-compound based mJNPs. This method shows good universality and can be used for the synthesis of more than 20 kinds of metal-compound based mJNPs, including alkali-earth metal compounds, transition metal compounds, rare-earth metal compounds etc. Besides, the composition of the metal-compound subunit can be well tuned from single to multiple metal elements, even high-entropy complexes. We believe that the synthesis method and obtained new members of mJNPs provide a very broad platform for the construction and application of mJNPs with rational designed functions and structures.

Fine-Tuning the Electrocatalytic Regeneration of NADH Cofactor Using [Rh(Cp*)(bpy)Cl]+-Functionalized Metal-Organic Framework Films

Electrochemical regeneration of the reduced form of the nicotinamide adenine dinucleotide (NADH) cofactor catalyzed by immobilized [Rh(Cp*)(bpy)Cl]⁺ is a promising approach for the enzymatic synthesis of many valuable chemicals with NAD-dependent dehydrogenases. However, rational control of the efficiency is often limited by the irregular structure of the electrode/electrolyte interface and the accessibility of the molecular catalyst. Here, we propose an electrochemical system for NADH cofactor regeneration, based on highly ordered three- dimensional (3D) metal-organic framework (NU-1000) films. [Rh(Cp*)(bpy)Cl]⁺ is incorporated at the zirconium nodes of NU-1000 via solvent-assisted ligand incorporation (SALI), leading to a diffusion-controlled behavior, associated with an electron hopping mechanism. Varying the ratio of redox-active [Rh(Cp*)(bpy)Cl]⁺ and inactive postgrafting agents enables the elaboration of functional electrodes with tunable electrocatalytic activity for NADH regeneration. The exceptionally high faradic efficiency of 97%, associated with a very high turnover frequency (TOF) of ∼1400 h^-1 for NADH regeneration, and the total turnover number (TTN) of over 20000 for the enzymatic conversion from pyruvate to l-lactate, when coupled with l-lactate dehydrogenases (LDH) as a model reaction, open up promising perspectives for employing these electrodes in various alternative bioelectrosynthesis approaches.

Metal organic framework-based Janus nanomaterials: rational design, strategic fabrication and emerging applications

Janus nanoparticles (JNPs) with dual segments comprising chemically distinct compositions have garnered the attention of researchers in the past few years. The combination of different materials with diversified morphology, topology, and distinct physico-chemical characteristics into the single Janus nanocrystal has yielded multifarious capabilities for a myriad of emerging applications involving catalysis, gas separation, electro-catalysis, adsorption and energy storage. However, the traditional Janus entities significantly lack the need for populous active sites and high surface area. To overcome the textural hurdles and improve the functionalities of JNPs, porous MOFs were eventually introduced into Janus particles. MOFs are well endowed with varied pore apertures, structures, large surface areas and tailored characteristics, making them potentially invaluable for Janus fabrication. Depending upon the usage, MOFs can be explored to design Metal@MOF, polymetalic@MOF, MOF@MOF and MOF-derived JNPs. In this regard, we have represented a holistic summarization of the design, synthesis and emerging applications of a rising class of multi-functionalized MOF-based Janus nanomaterials. Moreover, this article will significantly aid researchers with a vision of creating dual-composition porous nanomaterials as the MOF-based Janus nanoparticles is at infancy.

Facile and Rapid Room-Temperature Electrosynthesis and Controlled Surface Growth of Fe-MIL-101 and Fe-MIL-101-NH2

The electrochemical synthesis of metal-organic frameworks (MOFs) has been widely explored but has involved indirect routes, including anodic dissolution of solid metal electrodes or the use of interfacial redox chemistry to generate base equivalents and drive MOF assembly. These methods are limited in scope, as the former relies on the use of an anode consisting of the metal ion to be incorporated into the MOF, and the latter relies on the compatibility of the metal/ligand solution with the probase that is subsequently oxidized or reduced. We report the facile, direct electrochemical syntheses of four iron-based MOFs via controlled potential oxidation of dissolved metal cations. Oxidation of Fe(II) at +0.75 V (vs Ag/Ag+) in a solution containing 2,6-lutidine and terephthalic acid affords highly crystalline Fe-MIL-101. Controlled potential electrolysis with carboxy-functionalized ITO affords Fe-MIL-101 grown directly on the surface of modified electrodes. The methods we report herein represent the first general routes that employ interfacial electrochemistry to alter the oxidation state of metal ions dissolved in solution to directly trigger MOF formation. The reported method is functional group tolerant and will be broadly applicable to the bulk synthesis or surface growth of a range of MOFs based on metal ions with accessible oxidation states.

Fabrication of Gradient and Patterned Organic Thin Films by Bipolar Electrolytic Micelle Disruption Using Redox-Active Surfactants

Bipolar electrochemistry could be regarded as a powerful approach for selective surface modification due to the beneficial feature that a wirelessly controllable potential distribution on bipolar electrodes (BPEs). Herein we report a bipolar electrolytic micelle disruption (BEMD) system for the preparation of shaped organic films. A U-shaped bipolar electrolytic system with a sigmoidal potential gradient on the BPE gave gradient-thin films including various interesting organic compounds, such as a polymerizable monomer, an organic pigment and aggregation induced emission (AIE) molecules. The gradient feature was characterized by UV-Vis absorption, thickness measurements and surface morphology analysis. Corresponding patterned films were also fabricated using a cylindrical bipolar electrolytic setup that enables site-selective application of the potential on the BPE. Such a facile BEMD approach will open a long-term perspective with respect to organic film preparation.

Directional asymmetry over multiple length scales in reticular porous materials

In nature and synthetic materials, asymmetry is a useful tool to create complex and functional systems constructed from a limited number of building blocks. Reticular chemistry has allowed the synthesis of a wide range of discrete and extended structures, from which modularity permits the controlled assembly of their constituents to generate asymmetric configurations of pores or architectures. In this perspective, we present the different strategies to impart directional asymmetry over nano/meso/macroscopic length scales in porous materials and the resulting novel properties and applications.

Design strategies for the controlled assembly of discrete and extended reticular materials with asymmetric configurations of pores or architectures.

Chiral Macroporous MOF Surfaces for Electroassisted Enantioselective Adsorption and Separation

The development of surfaces with chiral features is a fascinating challenge for modern materials science, especially when they are used for chiral separation technologies. In this contribution, the design of hierarchically structured chiral macroporous zeolitic imidazolate framework-8 (ZIF-8) electrodes is presented. They are elaborated by an electrochemical deposition-dissolution technique based on the electrodeposition of metal through a colloidal crystal template, followed by controlled electrooxidation. This generates locally metal cations, which can interact with a chiral ligand present in the solution to form metal-organic frameworks (MOFs). The macroporous structure facilitates the access of the chiral recognition sites, located in the mesoporous MOF, and thus helps to overcome mass transport limitations. The efficiency of the designed functional materials for chiral adsorption and separation can be fine-tuned by applying an adjustable electric potential to the electrode surfaces. This hierarchical chiral ZIF-8 structure was deposited at the walls of a microfluidic device and used as a stationary phase for enantioselective separation. The potential-controlled interaction between the stationary phase and the chiral analytes allows baseline separation of two enantiomers. This opens up interesting perspectives for using hierarchically structured chiral MOFs as an efficient material for the selective adsorption and separation of chiral compounds.

Carbon dioxide electroreduction to C2 products over copper-cuprous oxide derived from electrosynthesized copper complex

Efficient electroreduction of carbon dioxide to multicarbon products in aqueous solution is of great importance and challenging. Unfortunately, the low efficiency of the production of C₂ products limits implementation at scale. Here, we report reduction of carbon dioxide to C₂ products (acetic acid and ethanol) over a 3D dendritic copper-cuprous oxide composite fabricated by in situ reduction of an electrodeposited copper complex. In potassium chloride aqueous electrolyte, the applied potential was as low as −0.4 V vs reversible hydrogen electrode, the overpotential is only 0.53 V (for acetic acid) and 0.48 V (for ethanol) with high C₂ Faradaic efficiency of 80% and a current density of 11.5 mA cm⁻². The outstanding performance of the electrode for producing the C₂ products results mainly from near zero contacting resistance between the electrocatalysts and copper substrate, abundant exposed active sites in the 3D dendritic structure and suitable copper(I)/copper(0) ratio of the electrocatalysts.

Electrocatalytic reduction of carbon dioxide is attractive for obtaining multicarbon products, but conversion efficiency is low. Here the authors use copper complex materials for electrochemical reduction of carbon dioxide to ethanol and acetic acid with high efficiencies and activities.

Electrochromic, Closed-Bipolar Electrodes Employing Aptamer-Based Recognition for Direct Colorimetric Sensing Visualization

In this paper, we adapt the electrochemical, aptamer-based (E-AB) sensor platform to develop colorimetric aptamer-based sensors using a closed-bipolar electrode (C-BPE) system. The C-BPE E-AB sensors provide quantitative detection of target molecules based on the rate of color change of an electrochromic Prussian blue (PB) thin-film indicator electrode. The C-BPE cathode, or sensing electrode, is modified with a redox-labeled aptamer that binds to a specific target. More specifically, we employed sequences specific for adenosine triphosphate (ATP) and tobramycin as test-bed targets because these sequences are well vetted. The C-BPE anode, or indicator electrode, was coated with an electrochromic thin film comprising Prussian white (PW) that, when reduced to PB, is accompanied by a corresponding color change used for analytical detection. The rate of color change from PW to PB is facilitated by a potassium ferricyanide-catalyzed oxidation of leucomethylene blue (LB) to methylene blue (MB), the redox label conjugated to the aptamer on the sensing electrode. We demonstrate that the rate of color change is quantitatively related to the concentration of target analyte, which provides a means for naked eye determination. When combined with smartphone-based colorimetric detection, these C-BPE E-AB sensors present a user-friendly alternative to traditional E-AB sensors that rely on voltammetric analysis and a potentiostat, opening up the possibility of point-of-use applications.

Wireless Electromechanical Readout of Chemical Information

Collecting electrochemical information concerning the presence of molecules in a solution is usually achieved by measuring current, potential, resistance, or impedance via connection to a power supply. Here, we suggest wireless electromechanical actuation as a straightforward readout of chemical information. This can be achieved based on the concept of bipolar electrochemistry, which allows measuring the presence of different model species in a quantitative way. We validate the concept by using a free-standing polypyrrole film. Its positively polarized extremity participates in an oxidation of the analyte and delivers electrons to the opposite extremity for the reduction of the polymer. This reduction is accompanied by the insertion of counterions and thus leads to partial swelling of the film, inducing its bending. The resulting actuation is found to be a linear function of the analyte concentration, and also a Michaelis-Menten type correlation is obtained for biochemical analytes. This electromechanical transduction allows an easy optical readout and opens up very interesting perspectives not only in the field of sensing but also far beyond, such as for the elaboration of self-regulating biomimetic systems.

Rapid and Large-Scale Synthesis of IRMOF-3 by Electrochemistry Method with Enhanced Fluorescence Detection Performance for TNP

Rapid and large-scale synthesis of metal-organic frameworks (MOFs) materials is of great significance for their practical applications. For the first time, we have electrochemically synthesized IRMOF-3 at room temperature by applying a voltage to a zinc electrode immersed in electrolyte containing 2-aminoterephthalic acid (NH₂-H₂BDC). The reaction conditions, including the ratio of solvent (electrolyte), the applied voltage, and different reaction times, were investigated and optimized. The degree of crystallinity and nanomorphology of the synthesized IRMOF-3 can be controlled by changing the reaction conditions. More importantly, we demonstrated that the electrochemical synthesis strategy can rapidly obtain nanoscale IRMOF-3 with high crystallinity on a gram scale. In addition, in comparison with the product of solvothermal synthesis, the electrochemically synthesized nanoscale IRMOF-3 exhibits improved fluorescent detection ability to 2,4,6-trinitrophenol (TNP) with a detection limit of about 0.1 ppm.

Photopatterning of fluorescent host-guest carriers through pore activation of metal-organic framework single crystals

Encoded fluorescent particles are fabricated through the selective uptake of dyes in photopatterned metal-organic framework single crystals. The concept is based on spatially controlled photochemical cleavage of pore-blocking pendant groups. Because of the crystalline and porous nature of the host, this approach enables guest uptake that is tunable and can be triggered though controlled irradiation.

Synergistic effect of the composite films formed by zeolitic imidazolate framework 8 (ZIF-8) and porous nickel films for enhanced amperometric sensing of hydrazine

A novel ZIF-Ni composite film exhibited an enhanced electrocatalytic hydrazine, benefitting from the synergistic effect between ZIF-8 crystals and porous nickel films.

An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors

This review highlights the steps needed to bring the properties of MOFs from the chemical lab to the microelectronics fab.

Amphiphilic Janus Particles Generated via a Combination of Diffusion-Induced Phase Separation and Magnetically Driven Dewetting and Their Synergistic Self-Assembly

Amphiphilic Janus particles are successfully obtained via a powerful strategy combining diffusion-induced phase separation and magnetically driven dewetting. A large-area, amphiphilic monolayer is been formed via a self-assembly paradigm based on a synergy between the amphiphilicity, shape anisotropy, and external magnetic field. This functionality holds great promise for practical applications in intelligent coatings, anti-bioadhesion, and antifouling surfaces.

Introducing asymmetric functionality into MOFs via the generation of metallic Janus MOF particles

Herein we report a versatile methodology for engineering metallic Janus MOF particles based on desymmetrization at interfaces, whereby each MOF particle is partially coated with a desired metal. We demonstrate that it enables the fabrication of homogeneous Janus MOF particles according to the MOF (ZIF-8, UiO-66 or UiO-66-SH), the metal (Au, Co or Pt), the MOF particle size (from the micrometer to the submicrometer regime) and the metal-film thickness (from 5 nm to 50 nm) employed. We anticipate that our strategy could be applied to impart new functionalities to MOFs, including asymmetric functionalization, magnetic-guidance and motorization.

Motorized Janus metal organic framework crystals

We describe Janus metal organic framework crystals that are propelled by bubble ejection. The Janus crystals are prepared by selective epitaxial growth of ZIF-67 on ZIF-8. The Janus crystals catalyse the decomposition of H2O2 into H2O and O2 on the ZIF-67 surface but not on the zinc containing ZIF-8 surface, resulting in propulsion of the Janus crystals.

Post metalation of solvothermally grown electroactive porphyrin metal–organic framework thin films

Zirconium-based porphyrin metal–organic framework (MOF-525) thin films were solvothermally grown on conducting substrates; they are electrochemically addressable in aqueous media.