Biomimetic Xanthium Strumarium Inspired Superhydrophobic Anti-/De-Icing Films with Near-Infrared Light-Induced Self-Healing

Superhydrophobic surfaces are susceptible to structural deformation and damage during use, which significantly impacts their long-term stability and performance in anti-/de-icing applications. To address this challenge, a biomimetic superhydrophobic polyurethane film inspired by Xanthium strumarium (PBXS) is proposed. This film not only delivers efficient anti-/de-icing performance but also demonstrates exceptional long-term durability. Even when the surface structure undergoes deformation or complete fracture, it can quickly self-heal under near-infrared light, restoring its original properties. The results show that, due to the superhydrophobic micron spine array and photothermal effect, PBXS can delay droplet freezing at low temperatures (-10 °C, 2052 s) and enable rapid de-icing (1 sun, 187 s). Moreover, by incorporating the shape-memory properties of thermoplastic polyurethane and self-healing capability, PBXS effectively addresses issues related to surface deformation (after ten deformation-healing cycles, PBXS maintains a water contact angle of 157 ± 1° and a rolling angle of 15.4 ± 1°) and material rupture (after ten fracture-healing cycles, PBXS retains a water contact angle of 152 ± 1° and a rolling angle of 16.1 ± 1°). This innovative approach enhances the long-term performance of anti-/de-icing films and shows significant potential for applications in road transportation, power transmission lines, and other anti-/de-icing fields.

Chiral Metal Self-Assemblies of Zirconium-Tetrahedra and Their Second Harmonic Generation Activity

The chirality of metal-organic cages holds enormous potential for novel applications in diverse fields, while it is relatively rare to employ such asymmetric units for the construction of noncentrosymmetric materials. Herein, by self-assembling the 4,4',4''-nitrilotribenzoic acid (H3NBA) with bis(cyclopentadienyl)-zirconium dichloride (Cp2ZrCl2, Cp=η5-C5H5) in different solvent conditions, we have obtained three hierarchical packing modes of metallo-tetrahedra with distinct spatial symmetry groups (designated as Zr-α, Zr-β, and Zr-γ). Among them, Zr-α employs a simple cubic arrangement and is a common centrosymmetric superstructure, which consists of a pair of equimolar metallo-tetrahedra enantiomers in its unit cell. While Zr-β results in conglomerates with spontaneous resolution without using any resolving agents, giving rise to two enantiopure entities separately (Zr-β-P, Zr-β-M). More importantly, Zr-γ breaks the inversion center of symmetry and crystallizes into a racemic yet non-centrosymmetric superstructure with face-centered cubic packing mode. Based on the non-centrosymmetric nature, the hierarchical superstructure Zr-γ displayed good second harmonic generation activities. This work presents a successful instance wherein the reaction solvent induces the modulation of intermolecular packing mode to afford non-centrosymmetric solid materials, which can greatly promote the development of noncentrosymmetric solid (NCS) materials.

Metal-Ligand Bonds Based Reprogrammable and Re-Processable Supramolecular Liquid Crystal Elastomer Network

Dynamic covalent bonds endow liquid crystal elastomers (LCEs) with network rearrangeability, facilitating the fixation of mesogen alignment induced by external forces and enabling reversible actuation. In comparison, the bond exchange of supramolecular interactions is typically too significant to stably maintain the programmed alignment, particularly under intensified external stimuli. Nevertheless, remaking and recycling of supramolecular interaction-based polymer networks are more accessible than those based on dynamic covalent bonds, as the latter are difficult to completely dissociate. Thus, preparing an LCE that possesses both supramolecular-like exchangeability and covalent bond-level stability remains a significant challenge. In this work, we addressed this issue by employing metal-ligand bonds as the crosslinking points of LCE networks. As such, mesogen alignment can be repeatedly encoded through metal-ligand bond exchange and stably maintained after programming, since the bond exchange rate is sufficiently slow when the programming and actuation temperatures are below the bond dissociation temperature. More importantly, the metal-ligand bonds can be completely dissociated at high temperatures, allowing the LCE network to be dissolved in a solvent and reshaped into desired geometries via solution casting. Building on these properties, our LCEs can be fabricated into versatile actuators, such as reversible folding origami, artificial muscles, and soft robotics.

Permanent Shape Reconfiguration and Locally Reversible Actuation of a Carbon Nanotube/Ethylene Vinyl Acetate Copolymer Composite by Constructing a Dynamic Cross-Linked Network

Given the rapid developments in modern devices, there is an urgent need for shape-memory polymer composites (SMPCs) in soft robots and other fields. However, it remains a challenge to endow SMPCs with both a reconfigurable permanent shape and a locally reversible shape transformation. Herein, a dynamic cross-linked network was facilely constructed in carbon nanotube/ethylene vinyl acetate copolymer (CNT/EVA) composites by designing the molecular structure of EVA. The CNT/EVA composite with 0.05 wt % CNT realized a steady-state temperature of ∼75 °C under 0.11 W/cm2 light intensity, which gave rise to remote actuation behavior. The dynamic cross-linked network along with a wide melting temperature offered opportunities for chemical and physical programming, thus realizing the achievement of the programmable three-dimensional (3D) structure and locally reversible actuation. Specifically, the CNT/EVA composite exhibited a superior permanent shape reconfiguration by activating the dynamic cross-linked network at 140 °C. The composite also showed a high reversible deformation rate of 11.1%. These features endowed the composites with the capability of transformation to 3D structure as well as locally reversible actuation performance. This work provides an attractive guideline for the future design of SMPCs with sophisticated structures and actuation capability.

A stretchable, mechanically robust polymer exhibiting shape-memory-assisted self-healing and clustering-triggered emission

Self-healing and recyclable polymer materials are being developed through extensive investigations on noncovalent bond interactions. However, they typically exhibit inferior mechanical properties. Therefore, the present study is aimed at synthesizing a polyurethane-urea elastomer with excellent mechanical properties and shape-memory-assisted self-healing behavior. In particular, the introduction of coordination and hydrogen bonds into elastomer leads to the optimal elastomer exhibiting good mechanical properties (strength, 76.37 MPa; elongation at break, 839.10%; toughness, 308.63 MJ m-3) owing to the phased energy dissipation mechanism involving various supramolecular interactions. The elastomer also demonstrates shape-memory properties, whereby the shape recovery force that brings damaged surfaces closer and facilitates self-healing. Surprisingly, all specimens exhibite clustering-triggered emission, with cyan fluorescence is observed under ultraviolet light. The strategy reported herein for developing multifunctional materials with good mechanical properties can be leveraged to yield stimulus-responsive polymers and smart seals.

Current Self-Healing Binders for Energetic Composite Material Applications

Energetic composite materials (ECMs) are the basic materials of polymer binder explosives and composite solid propellants, which are mainly composed of explosive crystals and binders. During the manufacturing, storage and use of ECMs, the bonding surface is prone to micro/fine cracks or defects caused by external stimuli such as temperature, humidity and impact, affecting the safety and service of ECMs. Therefore, substantial efforts have been devoted to designing suitable self-healing binders aimed at repairing cracks/defects. This review describes the research progress on self-healing binders for ECMs. The structural designs of these strategies to manipulate macro-molecular and/or supramolecular polymers are discussed in detail, and then the implementation of these strategies on ECMs is discussed. However, the reasonable configuration of robust microstructures and effective dynamic exchange are still challenges. Therefore, the prospects for the development of self-healing binders for ECMs are proposed. These critical insights are emphasized to guide the research on developing novel self-healing binders for ECMs in the future.

Halogen-bonded shape memory polymers

Halogen bonding (XB), a non-covalent interaction between an electron-deficient halogen atom and a Lewis base, is widely adopted in organic synthesis and supramolecular crystal engineering. However, the roadmap towards materials applications is hindered by the challenges in harnessing this relatively weak intermolecular interaction to devise human-commanded stimuli-responsive soft materials. Here, we report a liquid crystalline network comprising permanent covalent crosslinks and dynamic halogen bond crosslinks, which possess reversible thermo-responsive shape memory behaviour. Our findings suggest that I···N halogen bond, a paradigmatic motif in crystal engineering studies, enables temporary shape fixation at room temperature and subsequent shape recovery in response to human body temperature. We demonstrate versatile shape programming of the halogen-bonded polymer networks through human-hand operation and propose a micro-robotic injection model for complex 1D to 3D shape morphing in aqueous media at 37 °C. Through systematic structure-property-performance studies, we show the necessity of the I···N crosslinks in driving the shape memory effect. The halogen-bonded shape memory polymers expand the toolbox for the preparation of smart supramolecular constructs with tailored mechanical properties and thermoresponsive behaviour, for the needs of, e.g., future medical devices.

Heterogeneous Solid-State Plasticity of a Multi-Functional Metallo-Supramolecular Shape-Memory Polymer towards Arbitrary Shape Programming

Shape-memory polymers (SMPs) exhibit notable shape-shifting behaviors under environmental stimulations. In a specific shape-memory cycle, the material can be temporarily fixed at diverse geometries while recovering to the same permanent shape driven by the elastic network, which somewhat limits the versatility of SMPs. Via dynamic metallo-supramolecular interactions, herein, we report a multi-functional shape-memory polymer with tunable permanent shapes. The network is constructed by the metallic coordination of a four-armed polycaprolactone with a melting temperature of 54 °C. Owing to the thermo-induced stress relaxation through the bond exchange, the SMPs can be repeatedly programmed into different geometries in their solid state and show the self-welding feature. Via further welding of films crosslinked by different ions, it will present heterogeneous solid-state plasticity, and a more sophisticated shape can be created after the uniform thermal treatment. With elasticity and plasticity in the same network, the SMPs will display programmable shape-shifting behaviors. Additionally, the used material can be recast into a new film which retains the thermo-induced plasticity. Overall, we establish a novel strategy to manipulate the permanent shapes of SMPs through solid-state plasticity and develop a multi-functional shape-shifting material that has many practical applications.

An alternating conduction-insulation "molecular fence" model from fluorinated metallopolymers

Introducing fluoroalkyl chains into metallopolymers is a prerequisite to studying the self-organization effect of fluoroalkyl chains and their structure-property relationship. In this work, we present a fluorinated metallopolymer to build an alternating conduction-insulation "molecular fence" model synthesized by the coordination of Ru(II) and a bis-terpyridine-end-capped-phenyl (BTP) ligand modified with fluoroalkyl chains. Taking advantage of scanning tunneling microscopy (STM), a well-aligned periodic linear layered structure is observed clearly, which provides the most direct visualization of the self-organization effect of fluoroalkyl chains for the first time. In addition, combining ultraviolet-visible (UV-vis) absorption spectroscopy and theoretical calculations, we find that fluoroalkyl chains demonstrate a septation effect between two adjacent metallopolymer chains and further restrain the occurrence of interchain charge-transfer transition (ICCT) due to their closed packed structure. This "molecular fence" model can provide a novel route for electron conduction in molecular networks and guide potential applications in the materials science field.

Constructing a shape memory network with controllable stability and dynamic features through cation–π interactions

A dynamic shape memory network, PCL-Pyr, with excellent shape memory effects, mechanical performance and reprocessability was constructed based on cation–π interactions.

Intelligent Polymers, Fibers and Applications

Intelligent materials, also known as smart materials, are capable of reacting to various external stimuli or environmental changes by rearranging their structure at a molecular level and adapting functionality accordingly. The initial concept of the intelligence of a material originated from the natural biological system, following the sensing–reacting–learning mechanism. The dynamic and adaptive nature, along with the immediate responsiveness, of the polymer- and fiber-based smart materials have increased their global demand in both academia and industry. In this manuscript, the most recent progress in smart materials with various features is reviewed with a focus on their applications in diverse fields. Moreover, their performance and working mechanisms, based on different physical, chemical and biological stimuli, such as temperature, electric and magnetic field, deformation, pH and enzymes, are summarized. Finally, the study is concluded by highlighting the existing challenges and future opportunities in the field of intelligent materials.

Vitrimer-Like Shape Memory Polymers: Characterization and Applications in Reshaping and Manufacturing

The shape memory effect (SME) refers to the ability of a material to recover its original shape, but only in the presence of a right stimulus. Most polymers, either thermo-plastic or thermoset, can have the SME, although the actual shape memory performance varies according to the exact material and how the material is processed. Vitrimer, which is between thermoset and thermo-plastic, is featured by the reversible cross-linking. Vitrimer-like shape memory polymers (SMPs) combine the vitrimer-like behavior (associated with dissociative covalent adaptable networks) and SME, and can be utilized to achieve many novel functions that are difficult to be realized by conventional polymers. In the first part of this paper, a commercial polymer is used to demonstrate how to characterize the vitrimer-like behavior based on the heating-responsive SME. In the second part, a series of cases are presented to reveal the potential applications of vitrimer-like SMPs and their composites. It is concluded that the vitrimer-like feature not only enables many new ways in reshaping polymers, but also can bring forward new approaches in manufacturing, such as, rapid 3D printing in solid state on space/air/sea missions.

100th Anniversary of Macromolecular Science Viewpoint: Engineering Supramolecular Materials for Responsive Applications-Design and Functionality

Supramolecular polymers allow access to dynamic materials, where noncovalent interactions can be used to offer both enhanced material toughness and stimuli-responsiveness. The versatility of self-assembly has enabled these supramolecular motifs to be incorporated into a wide array of glassy and elastomeric materials; moreover, the interaction of these noncovalent motifs with their environment has shown to be a convenient platform for controlling material properties. In this Viewpoint, supramolecular polymers are examined through their self-assembly chemistries, approaches that can be used to control their self-assembly (e.g., covalent cross-links, nanofillers, etc.), and how the strategic application of supramolecular polymers can be used as a platform for designing the next generation of smart materials. This Viewpoint provides an overview of the aspects that have garnered interest in supramolecular polymer chemistry, while also highlighting challenges faced and innovations developed by researchers in the field.

Fluorescent Metallosupramolecular Elastomers for Fast and Ultrasensitive Humidity Sensing

Fluorescent supramolecular polymers that can respond to subtle external stimuli to generate luminescence signals are promising in a wide range of applications, including probes, anti-counterfeiting materials, and sensors. However, complicated preparative procedures, limited responsive speed, and relatively low sensitivity still limit their practical sensing applications. Herein, we report europium-containing metallosupramolecular (PU-Eu) elastomers for fast and ultrasensitive humidity sensing by employing hygroscopic polyurethane (PU), whose urethane groups can coordinate with europium ions (Eu³⁺), emitting a strong luminescent signal by ligand-to-metal energy transfer. The variant of the coordination bond strength triggered by external humidity imparts the PU-Eu elastomer with a fast (∼1.1 s) and ultrasensitive response to the humid condition, where the external humidity increases by ∼1% and the corresponding fluorescence intensity will drop by ∼421.98 a.u. By a dip-coating process, PU-Eu elastomers can be conveniently coated on a hydrophilic and porous cellulose acetate nanofiber membrane, and the resulting composite membrane can achieve real-time and reversible monitoring of environmental humidity and human respiration. Given the versatility of PU-Eu elastomers, this study provides a low-cost and facile route of obtaining fluorescent metallosupramolecular polymers for fast and ultrasensitive humidity sensing.

Synergistic Covalent and Supramolecular Polymers for Mechanically Robust but Dynamic Materials

Nature has engineered delicate synergistic covalent and supramolecular polymers (CSPs) to achieve advanced life functions, such as the thin filaments that assist in muscle contraction. Constructing artificial synergistic CSP materials with bioinspired mechanically adaptive features, however, represents a challenging goal. Here, we report an artificial CSP system to illustrate the integration of a covalent polymer (CP) and a supramolecular polymer (SP) in a synergistic fashion, along with the emergence of notable mechanical and dynamic properties which are unattainable when the two polymers are formed individually. The synergistic effect relies on the peculiar network structures of the SP and CPs, which endow the resultant CSPs with overall improved mechanical performance in terms of the stiffness, strength, stretchability, toughness, and elastic recovery. Moreover, the dynamic properties of the SP, including self-healing, stimuli-responsiveness, and reprocessing, are also retained in the CSPs, thus leading to their application as programmable and tunable materials.

Self-Healing Polymers Based on Coordination Bonds

Self-healing ability is an important survival feature in nature, with which living beings can spontaneously repair damage when wounded. Inspired by nature, people have designed and synthesized many self-healing materials by encapsulating healing agents or incorporating reversible covalent bonds or noncovalent interactions into a polymer matrix. Among the noncovalent interactions, the coordination bond is demonstrated to be effective for constructing highly efficient self-healing polymers. Moreover, with the presence of functional metal ions or ligands and dynamic metal-ligand bonds, self-healing polymers can show various functions such as dielectrics, luminescence, magnetism, catalysis, stimuli-responsiveness, and shape-memory behavior. Herein, the recent developments and achievements made in the field of self-healing polymers based on coordination bonds are presented. The advantages of coordination bonds in constructing self-healing polymers are highlighted, the various metal-ligand bonds being utilized in self-healing polymers are summarized, and examples of functional self-healing polymers originating from metal-ligand interactions are given. Finally, a perspective is included addressing the promises and challenges for the future development of self-healing polymers based on coordination bonds.

Robust, Reprocessable, and Reconfigurable Cellulose-Based Multiple Shape Memory Polymer Enabled by Dynamic Metal-Ligand Bonds

Smart materials with multiple shape memory capacities have gradually attracted the interest of a lot of researchers due to their potential application in textiles, smart actuators, and aerospace engineering. However, the design and sustainable synthesis of multiple shape memory polymers (SMPs) simultaneously possessing robust mechanical strength, reprocessability, and reconfigurability still remain full of challenges. Starting from a readily available biomass material cellulose, a well-defined SMP, cellulose-graft-poly(n-butyl acrylate-co-1-vinylimidazole) copolymer (Cell-g-(BA-co-VI)) was facilely synthesized by addition-fragmentation chain transfer polymerization (RAFT) and the subsequent metallosupramolecular cross-linking. Taking advantage of the dynamic bonding, i.e., the rapid reversible fragmentation and the formation of metal ion-imidazole coordination, polymer networks with highly tunable mechanical properties, excellent solid-state plasticity, and quadruple-shape memory capacity are handily attainable. Microscopically, the metal-ligand clusters have a strong tendency to phase segregate from the soft grafted copolymers indicated by atomic force microscopy (AFM), and these serve as netpoints to construct novel SMPs. This article represents our new exploration of the next-generation SMPs based on cellulose backbone where carrying with supramolecular cross-linked soft grafted copolymers. This architecture design allows achieving robust, reprocessable, and reconfigurable thermoplastic SMPs that are difficult to realize by many other methods. Integrating these properties into one system in a synergetic manner also provides a novel approach to the high value addition application of cellulose in the fabrication of advanced functional materials.

Preparation, characterization and properties of intrinsic self-healing elastomers

Significant advances have been made in the development of self-healing synthetic polymer materials in recent years. This review article discusses the recent progress in preparation, characterization and properties of different kinds of intrinsic self-healing elastomers based on reversible covalent bonds and dynamic supramolecular chemistry. Healing conditions, mechanical property recovery and healing efficiency are the main discussion topics. Potential applications, challenges and future prospects in self-healing elastomer fields are also discussed in the last part of this review.

Synthesis of Metallopolymers and Direct Visualization of the Single Polymer Chain

During the past few decades, the study of the single polymer chain has attracted considerable attention with the goal of exploring the structure-property relationship of polymers. It still, however, remains challenging due to the variability and low atomic resolution of the amorphous single polymer chain. Here, we demonstrated a new strategy to visualize the single metallopolymer chain with a hexameric or trimeric supramolecule as a repeat unit, in which Ru(II) with strong coordination and Fe(II) with weak coordination were combined together in a stepwise manner. With the help of ultrahigh-vacuum, low-temperature scanning tunneling microscopy (UHV-LT-STM) and scanning tunneling spectroscopy (STS), we were able to directly visualize both Ru(II) and Fe(II), which act as staining reagents on the repeat units, thus providing detailed structural information for the single polymer chain. As such, the direct visualization of the single random polymer chain is realized to enhance the characterization of polymers at the single-molecule level.

Recyclable, Self-Healing, Thermadapt Triple-Shape Memory Polymers Based on Dual Dynamic Bonds

Fabricating a single polymer network with a combination of a multi-shape memory effect (multiple-SME), solid-state plasticity, recyclability and self-healing behavior remains a challenge. We designed imine bond and ionic hydrogen bond dual cross-linked polybutadiene (PB) networks. The resulting PB networks showed a triple-shape memory effect, where imine bonds could be used to fix the permanent shape and ionic hydrogen bonds and glass transition acted as the transition segments for fixing/releasing the temporary shapes. Additionally, the dual dynamic bonds offered PB networks outstanding solid-state plasticity, recyclability and self-healing behavior. This strategy provides some insights for preparing shape memory polymers integrating multiple-SME and multi-functionality.

Living coordination–insertion copolymerization of 1-hexene and ligated α-olefins using an α-diimine nickel catalyst and preparation of metal–ligand coordination crosslinked polymers

Metal–ligand coordination crosslinked polymers were prepared by coordination–insertion copolymerization of 1-hexene and ligated α-olefins.

Self-healing and shape memory metallopolymers: state-of-the-art and future perspectives

Recent achievements and problems associated with the use of metallopolymers as self-healing and shape memory materials are presented and evaluated.

Shape-Memory Metallopolymer Networks Based on a Triazole-Pyridine Ligand

Shape memory polymers represent an interesting class of stimuli-responsive polymers. With their ability to memorize and recover their original shape, they could be useful in almost every area of our daily life. We herein present the synthesis of shape-memory metallopolymers in which the switching unit is designed by using bis(pyridine-triazole) metal complexes. The polymer networks were synthesized via free radical polymerization of methyl-, ethyl- or butyl-methacrylate, tri(ethylene glycol) dimethacrylate and a methacrylate moiety of the triazole-pyridine ligand. By the addition of zinc(II) or cobalt(II) acetate it was possible to achieve metallopolymer networks featuring shape-memory abilities. The successful formation of the metal-ligand complex was proven by Fourier transform infrared (FT-IR) spectroscopy and by 1H NMR spectroscopy. Furthermore, the shape-recovery behavior was studied in detailed fashion and even triple-shape memory behavior could be revealed.

Mechanochromic and thermochromic shape memory photonic crystal films based on core/shell nanoparticles for smart monitoring

Shape memory photonic crystals (SMPCs) combining the main characteristics of shape memory materials and photonic crystals have drawn increasing research interest. In sharp contrast to traditional responsive photonic crystals, the temporary shape of SMPCs can be "frozen" and photonic configurations can be modulated by temperature. However, the large-scale fabrication of SMPCs still remains a big challenge, making the practical application difficult. Herein novel scalable SMPC films with both mechanochromic and thermochromic properties are reported. Unlike traditional template-based methods resulting in only a small size, SMPC films are fabricated by a facile hot-pressing method and post-photocuring technology to give large-area freestanding polymer films. The films are mechanically robust and flexible, featuring an excellent structural color which can be changed upon stretching, similar to the color change process of chameleons in response to the environment. The blue-shift of the reflection peak up to 120 nm can be observed when the film is stretched. The films can be reversibly stretched and recovered in 25 cycles without obvious changes in reflection spectra. The temporary shape accompanied by tremendous color changes in the corresponding SMPC films after mechanical stress induced hot programming could be simply fixed by cooling the structure below the glass transition temperature of the polymer matrix. Incorporated programmed optical properties could afterwards be erased by temperature, and initial optical properties could be fully restored. Based on the fully reversible programmable shape as well as optical properties, the investigated SMPC films are expected to be promising candidates for various potential applications, such as smart monitoring, sensors, anti-counterfeiting, and displays.

Plastic-like Hydrogels with Reversible Conversion of Elasticity and Plasticity and Tunable Mechanical Properties

The development of hydrogels with excellent mechanical properties is highly desirable in both fundamental studies and practical applications. But it is difficult to construct hydrogels that are both tough and stiff at the same time as these properties often contradict each other. Here, we report a facile and efficient method for producing ultrastiff and tough poly(N-isopropylacrylamide) (PNIPAM)/clay plastic-like hydrogels (PHs) by immersing PNIPAM/clay hydrogel into NaCl aqueous solution. The optimized PH-2-6 presented superior strength, modulus, and toughness (4.1 ± 0.2 MPa, 41.6 ± 8 MPa, and 15.85 ± 0.8 MJ m^-3, respectively). The unique mechanical properties are attributed to the synergistic effect of the osmotic pressure and the strong affinity between Na⁺ ion and the PNIPAM chain, which lead to a high degree of PNIPAM chain entanglement and fixing. Note that the PHs were molded into any required shape under an applied force, and retained permanently their shapes even if the load was removed, thus displaying typical plasticity. However, the deformed PHs could return to their original size and softness of hydrogel when immersed in pure water, which is a kind of shape-memory effect. The reversible conversion of elasticity and plasticity and shape memory arise from a kind of dynamic physical across-linking of Na⁺ and PNIPAM molecular chains, which could exist in the salt aqueous and disintegrate in water reversibly. Moreover, the mechanical properties of hydrogel can be tuned by adjusting the salt concentration and immersion time. The facile strategy may provide further avenue in developing hydrogels with such versatile dynamic behaviors to expand their applications.

Polydiacetylene-Polyurethane Crisscross Elastomer as an Intrinsic Shape Memory Conductive Polymer

Owing to the high phase transition temperature and incompatibility with thermoplastic elastomers, conjugated polymers are hardly formulated as shape memory materials. This work presents a crisscross polymer composed of polyurethane and polydiacetylene. Phase separation is completely avoided based on the photoinduced polymerization of polydiacetylene from polyurethane chains. The two backbones are intercrossed and covalently linked to each other. Particularly, polyurethane acts as a soft segment to provide elastic performance, and the rigid polydiacetylene provides conductive pathways. Such a crisscross topology, combined with soft and rigid compositions, renders the possibility to serve the polymer as an intrinsically elastic conductive polymer. Intriguingly, the polymer possesses shape memory performance, meanwhile retaining the reliable conductivity. Electrical tests demonstrate that the shape memory conductive polymer is one attractive candidate for exploiting shape-customized strain sensors.

Gradient Polydopamine Coating: A Simple and General Strategy toward Multishape Memory Effects

Multi shape memory polymers (multi-SMPs) exhibit many potential applications such as aerospace, soft robotics, and biomedical devices because of their unique abilities. Although many works are done to broaden the preparations of multi-SMPs, the desire to a simple and versatile strategy as well as more complex shapes still exists. Moreover, a light-induced SMP shows more advantages than a thermal-induced one in many practical working circumstances. Herein, inspired by strong adhesion and efficient photothermal conversion of polydopamine (PDA) coating, we report a more simple and facile approach to prepare light-induced multi-SMPs by introducing a gradient PDA coating on a dual-SMP through time-controlled dipping. The photothermal converting properties with varying thicknesses of PDA under the tunable near-infrared light source are investigated. Then, light-induced multishape memory effects based on gradient PDA coatings are illustrated, where three designs of multi-SMPs - rectangle, triangle, and cross are prepared and demonstrated. Also, the evolutions of coating morphology during shape shifting are carefully studied. Finally, we present few complex designs of patterns and shapes as well as a design of potential application for the highly controllable smart devices. This strategy demonstrates a very simple and general strategy to design and prepare the light-induced multi-SMPs with complex shapes based on any thermal-responsive dual-SMPs.

Cellulose nanofibers/polyurethane shape memory composites with fast water-responsivity

The PU/CNF nanocomposites display water-triggered fast shape memory ability, such as curling and unfolding, demonstrating tailored shape memory performance.