Confined Self-Assembly in Two-Dimensional Interlayer Space: Monolayered Mesoporous Carbon Nanosheets with In-Plane Orderly Arranged Mesopores and a Highly Graphitized Framework

Assembly-foaming synthesis of hierarchically porous nitrogen-doped carbon supported single-atom iron catalysts for efficient oxygen reduction

High-performance electrocatalysts are highly concerned in oxygen reduction reaction (ORR) related energy applications. However, facile synthesis of hierarchically porous structures with highly exposed active sites and improved mass transfer is challenging. Herein, we develop a novel assembly-foaming strategy for synthesizing hierarchically porous nitrogen-doped carbon supported single-atom iron catalysts. Incorporation of a Fe3+/histidine complex into the block copolymer F127/resol assembly system not only enables an assembly-foaming process forming hierarchical pores, but also promotes the creation of abundant nitrogen-coordinated single-atom Fe (FeNX) sites on well-graphitized carbon skeletons. The obtained materials possess interconnected macropores (1.5-11.5 µm), large mesopores (5-30 nm) and rich micropores, high surface areas (534-970 m2 g-1), large pore volumes (0.68-1.04 cm3 g-1) and rich FeNX sites. The optimized sample exhibits a superior ORR activity (onset potential 1.03 V and half-wave potential 0.89 V) to the commercial 20 wt% Pt/C catalyst, a high kinetic current density and excellent stability and methanol tolerance.The prominent performance stems from the coeffects of the hierarchical pore structure and the rich accessible FeNX sites. The significance of the pore structure is revealed by the positive linear relationship between the double-layer capacitances of the obtained materials and their ORR activities.

Heteropoly acid-assisted carboxymethyl cellulose-soft template self-assembly synthesis of three-dimensional hybrid layered porous carbon for supercapacitors

This study introduces an innovative, environmentally friendly method for controlling the morphology, size, spatial structure and activity of three-dimensional hybrid layered porous carbon (HLPC). The hydrothermal reaction is carried out in a microreactor through a synergistic interaction between triblock copolymer (F127) and ammonium molybdate phosphate (APMo). Carboxymethyl cellulose undergoes acid-catalyzed hydrolysis and self-assembles into HLPC at the interface between the microreactor and the solution. The structural integrities and dimensional attributes of HLPC are modulated by adjusting the hydrothermal time to allow for swelling, tearing or further development. The addition of varying amounts of APMo allows customization of HLPC's spatial structures, such as layered, curled or folded configurations. HLPC demonstrates efficient ion storage and transmission channels, a hydrophilic surface, high reactivity and robust electrochemical performance. When tested in a 6 mol·L-1 KOH electrolyte, HLPC achieved a specific capacitance of 318 F·g-1 at a current density of 0.5 A·g-1 and maintained a retention of 96 % after 10,000 charging/discharging cycles at 10 A·g-1. Additionally, the symmetrical supercapacitor with HLPC in an ionic liquid electrolyte (1-butyl-3-methylimidazolium tetrafluoroborate) exhibited a specific capacitance of 102 F·g-1 at 0.1 A·g-1 and an energy density of 31.88 W·h·kg-1.

Unveiling Confinement Engineering for Achieving High-Performance Rechargeable Batteries

The confinement effect, restricting materials within nano/sub-nano spaces, has emerged as an innovative approach for fundamental research in diverse application fields, including chemical engineering, membrane separation, and catalysis. This confinement principle recently presents fresh perspectives on addressing critical challenges in rechargeable batteries. Within spatial confinement, novel microstructures and physiochemical properties have been raised to promote the battery performance. Nevertheless, few clear definitions and specific reviews are available to offer a comprehensive understanding and guide for utilizing the confinement effect in batteries. This review aims to fill this gap by primarily summarizing the categorization of confinement effects across various scales and dimensions within battery systems. Subsequently, the strategic design of confinement environments is proposed to address existing challenges in rechargeable batteries. These solutions involve the manipulation of the physicochemical properties of electrolytes, the regulation of electrochemical activity, and stability of electrodes, and insights into ion transfer mechanisms. Furthermore, specific perspectives are provided to deepen the foundational understanding of the confinement effect for achieving high-performance rechargeable batteries. Overall, this review emphasizes the transformative potential of confinement effects in tailoring the microstructure and physiochemical properties of electrode materials, highlighting their crucial role in designing novel energy storage devices.

Intervention-Free Graphitization of Carbon Microspheres from a Non-Graphitizing Polymer at Low Temperature: Nanopores as Dynamic Nanoreactors

Graphitizability of organic precursors is the topic of numerous investigations due to the wide applications of graphitic materials in the industry and emerging technologies of supercapacitors, batteries, etc. Most polymers, such as polydivinyl benzene (PDVB) are classified as non-graphitizings that do not convert to Graphite even after heating to 3000℃. Here, for the first time, the development of graphitic structure in the hierarchal porous sulfonated-PDVB microspheres without employing specific equipment or additives like metal catalysts, organic ingredients, or graphite particles, at 1100°C is reported. The abnormal additive-free graphitic structure formation is confirmed by Raman spectroscopy (ID/IG = 0.87), high-resolution transmission electron microscopy (HRTEM), and selected area diffraction patterns (SAED), as well as x-ray diffraction patterns (XRD), while preservation of aromatic compounds from the carbonization is detected by Fourier transform infrared (FTIR) analysis. Polymer evolution from room temperature to 1100°C is also studied by FTIR, Raman spectroscopy, and XRD techniques. Based on the obtained results, it is suggested that the hierarchal and complicated ink-bottle pore network with a high surface area besides super micropores in the sulfonated-PDVB microspheres has served as nano-sized reaction media. These pores, hereafter referred as "dynamic nanoreactors", are expected to have confined the in-situ produced thermal decomposition products containing broken bond benzene rings, while changing dimensionally and structurally during the designed carbonization regime. This confinement has led to the benzene rings fusion at 250°C, a remarkable extension of them at 450°C, their growth to graphene sheets at 900°C and finally, the stacking of curved graphene layers at 1100°C. The results of this research put stress on the capability of nanopores as nanoreactors to facilitate reactions of decomposition products at low temperatures and ambient pressures to form stacked layers of graphene; A transformation that normally requires catalysts and very high pressures for only specific polyaromatic hydrocarbons.

Synthesis of three-dimensional (3D) hierarchically porous iron-nickel nanoparticles encapsulated in boron and nitrogen-codoped porous carbon nanosheets for accelerated water splitting

Designing two-dimensional (2D) porous carbon nanosheets is a promising strategy for enhancing the water-splitting activities of non-noble metal catalysts. In this study, we developed a novel method for synthesizing the novel three-dimensional (3D) hierarchically porous iron-nickel (FeNi) nanoparticles encapsulated in boron (B) and nitrogen (N)-codoped porous carbon nanosheets (denoted as FeNi@BNPCNS). Owing to the advantages of morphology and structure of B and N, 10.31 atom % of B/N active centers were successfully doped into the optimal FeNi@BNPCNS-800 nanosheets. FeNi@BNPCNS-800 exhibited better hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activities than control catalysts in an alkaline solution. However, the HER and OER electrocatalytic activities of FeNi@BNPCNS-800 were slightly lower than 20 wt% Pt/C and RuO2. The FeNi@BNPCNS-800||FeNi@BNPCNS-800 electrolyzer achieved 10 mA cm-2 at 1.514 V, which was 73 mV lower than that of 20 wt% Pt/C||RuO2 electrolyzer (1.587 V). The perfect 3D honeycomb-like architectures, abundant mesopores/defects, and abundant electrocatalytic active sites were attributed to the outstanding water-splitting performances of FeNi@BNPCNS-800 nanosheets. This study provides an efficient strategy for the large-scale, rapid, and low-cost fabrication of 2D porous carbon nanosheets without using any template, surfactant, or expensive raw material, thus presenting a simple approach to design advanced non-noble metal electrocatalysts for water splitting.

Amorphous carbon nanosheets suitable for deep eutectic solvent electrolyte toward cryogenic energy storage

The emerging deep eutectic solvent (DES) electrolyte has great potential in realizing commercial-scale application of electric double-layer capacitors (EDLCs) served in low temperature environment. That goal, however, rests with how to design the interface structure of electrode materials for well-matching with DES electrolyte. Herein, porous carbon nanosheets (PCNs) were obtained from coal tar pitch through Friedel-Crafts acylation reaction and melting salt intercalation process. The morphology, specific surface area and porosity of porous carbon nanosheets were regulated by tailoring the abundance of the dangling-bonds grafted on the CTP molecules. Profiting from the large specific surface area, suitable pore structure and good two-dimensional structure to provide more active sites and enhance ion transport capacity, the PCNs-0.10 delivers a maximal specific capacitance of 504F g-1 at 0.1 A g-1, which is overmatch than most of previously reported for other carbon materials. As-assembled symmetrical EDLCs using K+ DES electrolyte, can be assembled to work at -40 °C to 75 °C and exhibit satisfactory energy density. The strategy proposed here has opened a new way for exploring the large-scale preparation of electrode materials suitable for ultra-low temperature capacitors.

Surface charge induced self-assembled nest-like Ni3S2/PNG composites for high-performance supercapacitors

The paper presents a self-assembly approach to synthesize Ni3S2/N, P co-doped graphene (PNG) composite electrode materials for supercapacitors with high energy storage performance and structural stability. Innovatively, the self-assembly approach is induced via the surface charge effect utilizing a two-step hydrothermal method. The doping of nitrogen (N) and phosphorus (P) atoms regulates the surface charge distribution on graphene nanosheets. Therefore, in the synthesized Ni3S2/PNG heterostructures, Ni3S2 nanowires are interwoven into nests and uniformly attached to PNG. The design of the electrode materials with such a special structure not only supports each other to improve the stability of the materials but also facilitates the rapid diffusion of electrolyte ions. Based on the advantages of composition and structure, Ni3S2/PNG has a high specific capacitance of 1117C g-1 at a current density of 1 A/g and excellent rate performance. The asymmetric supercapacitors (ASC) assembled with Ni3S2/PNG and PNG as positive and negative materials respectively have a high energy density of 62 Wh kg-1 at a power density of 158 W kg-1.

Constructing FeS and ZnS Heterojunction on N,S-Codoped Carbon as Robust Electrocatalyst toward Oxygen Reduction Reaction

Highly active and cost-efficient electrocatalysts for oxygen reduction reaction (ORR) are significant for developing renewable energy conversion devices. Herein, a nanocomposite Fe/ZnS-SNC electrocatalyst with an FeS and ZnS heterojunction on N,S-codoped carbon has been fabricated via a facile one-step sulfonating of the pre-designed Zn- and Fe-organic frameworks. Benefitting from the electron transfer from FeS to adjacent ZnS at the heterointerfaces, the optimized Fe/ZnS-SNC900 catalyst exhibits excellent ORR performances, featuring the half-wave potentials of 0.94 V and 0.81 V in alkaline and acidic media, respectively, which is competitive with the commercial 20 wt.% Pt/C (0.87 and 0.76 V). The flexible Zn-air battery equipping Fe/ZnS-SNC900 affords a higher open-circuit voltage (1.45 V) and power density of 30.2 mW cm-2. Fuel cells assembled with Fe/ZnS-SNC900 as cathodic catalysts deliver a higher power output of 388.3 and 242.8 mW cm-2 in H2-O2 and -air conditions. This work proposes advanced heterostructured ORR electrocatalysts that effectively promote renewable energy conversions.

Engineering amorphous SnO2 nanoparticles integrated into porous N-doped carbon matrix as high-performance anode for lithium-ion batteries

A facile in-situ preparation strategy is proposed to anchor amorphous SnO₂ nanoparticles into the porous N-doped carbon (NC) matrix to fabricate amorphous composite powders (am-SnO₂@p-NC), which feature the hierarchically interconnected and well interlaced porous configurations by employing polyvinylpyrrolidone as the soft template. The morphology regulation of the porous structure is precisely realized by adjusting the content of the template and the relationship between structural evolution and electrochemical performance of composite powders is accurately described to explore the optimal template dosage. The results indicate that the am-SnO₂@p-NC-50 % composite electrode can deliver the improved lithium storage capacity and cycling performance when the content of the template is controlled at 0.500 g, in which the initial discharge specific capacity is about 1557.6 mAh/g and the reversible value retains at 841.5 mAh/g after 100 cycles at 100 mA/g. Meanwhile, the discharge specific capacity of 869.8 mAh/g is exhibited for the am-SnO₂@p-NC-50 % composite electrode after 60 cycles when the current density is recovered from 2000 to 100 mA/g. Moreover, the Li⁺ ions diffusion coefficient up to about 5.5 × 10^-12 cm²/s is calculated from galvanostatic intermittent titration technique tests, which can be partly ascribed to the conductive NC substrate that provides the high electronic conductivity, and partly to the highly porous structure that shortens Li⁺ ions transfer pathways and guarantees the fast reaction kinetics. Therefore, the hierarchically porous engineering of carbon networks to confine amorphous transition metal oxide nanoparticles is of great significance in the development of high-performance anode materials for lithium-ion batteries.

Templated Synthesis of Exfoliated Porous Carbon with Dominant Graphitic Nitrogen

We present here a new approach for the synthesis of nitrogen-doped porous graphitic carbon (g-NC) with a stoichiometry of C6.3H3.6N1.0O1.2, using layered silicate as a hard sacrificial template. Autogenous exfoliation is achieved due to the heterostacking of 2D silicate and nitrogen-doped carbon layers. Micro- and meso-porosity is induced by melamine and cetyltrimethylammonium (C16TMA). Our density functional calculations and X-ray photoelectron spectroscopy (XPS) observations confirm that the most dominant nitrogen configuration in g-CN is graphitic, while pyridinic and pyrrolic nitrogens are thermodynamically less favored. Our large-scale lattice dynamics calculations show that surface termination with H and OH groups at pores accounts for the observed H and O in the composition of the synthesized g-NC. We further evaluate the electrocatalytic and the supercapacitance activities of g-NC. Interestingly, this material exhibits a specific capacitance of ca. 202 F g-1 at 1 A g-1, retaining 90% of its initial capacitance after 10,000 cycles.

Effect of MAX Phase Ti3ALC2 on the Ultrafiltration Membrane Properties and Performance

Membrane fouling remains a major obstacle to ultrafiltration. Due to their effectiveness and minimal energy demand, membranes have been extensively employed in water treatment. To improve the antifouling property of the PVDF membrane, a composite ultrafiltration membrane was created employing the in-situ embedment approach throughout the phase inversion process and utilizing a new 2D material, MAX phase Ti₃ALC₂. The membranes were described using FTIR (Fourier transform infrared spectroscopy), EDS (energy dispersive spectroscopy), CA (water contact angle), and porosity measurements. Additionally, atomic force microscopy (AFM), field emission scanning electron microscopy (FESEM), and energy dispersive spectroscopy (EDS) were employed. Standard flux and rejection tests were applied to study the produced membranes' performance. Adding Ti₃ALC₂ reduced composite membranes' surface roughness and hydrophobicity compared to the pristine membrane. Porosity and membrane pore size increased with the addition up to 0.3% w/v, which decreased as the additive percentage increased. The mixed matric membrane with 0.7% w/v of Ti₃ALC₂ (M7) had the lowest CA. The alteration in the membranes' properties reflected well on their performance. The membrane with the highest porosity (0.1% w/v of Ti₃ALC₂, M1) achieved the highest pure water and protein solution fluxes of 182.5 and 148.7. The most hydrophilic membrane (M7) recorded the highest protein rejection and flux recovery ratio of 90.6, which was much higher than that of the pristine membrane, 26.2. MAX phase Ti₃ALC₂ is a potential material for antifouling membrane modification because of its protein permeability, improved water permeability, and outstanding antifouling characteristics.

Introduction of Multicomponent Dyes into 2D MOFs: A Strategy to Fabricate White Light-Emitting MOF Composite Nanosheets

Metal-organic frameworks (MOFs) have been extensively studied in host-guest chemistry by means of ultrahigh porosities, tunable channels, and component diversities. As the host matrix, MOFs exhibit immense potential in the preparation of single-phase white light-emitting (SPWLE) materials. Nonetheless, it is a great challenge that the size of the introduced guest molecules is limited by MOF pores, which affects the WLE optimization. In this work, two-dimensional (2D) MOFs are first utilized as the host matrices to simultaneously encapsulate red-green-blue fluorescent dyes for SPWLE. Various dyes@2D MOF composites with high-quality WLE performances and ultrathin nanosheet morphologies are directly assembled from 2D MOF precursors and dyes in high yields. Owing to the flexible interlamellar space of 2D MOFs, different types and sizes of guests can be easily introduced, which greatly expands the range of available MOF hosts and guests, making the WLE much more tunable. The strategy of employing 2D MOFs as the host matrices to introduce multicomponent dyes for SPWLE nanosheets resolves the restriction of MOF pores on the guest molecule size and opens a new avenue to rationally design and prepare SPWLE nanosheets that are highly solution-processable.

Recent Advancements in the Recovery and Reuse of Organic Solvents Using Novel Nanomaterial-Based Membranes for Renewable Energy Applications

The energy crisis in the world is increasing rapidly owing to the shortage of fossil fuel reserves. Climate change and an increase in global warming necessitates a change in focus from petroleum-based fuels to renewable fuels such as biofuels. The remodeling of existing separation processes using various nanomaterials is of a growing interest to industrial separation methods. Recently, the design of membrane technologies has been the most focused research area concerning fermentation broth to enhance performance efficiency, while recovering those byproducts to be used as value added fuels. Specifically, the use of novel nano material membranes, which brings about a selective permeation of the byproducts, such as organic solvent, from the fermentation broth, positively affects the fermentation kinetics by eliminating the issue of product inhibition. In this review, which and how membrane-based technologies using novel materials can improve the separation performance of organic solvents is considered. In particular, technical approaches suggested in previous studies are discussed with the goal of emphasizing benefits and problems faced in order to direct research towards an optimized membrane separation performance for renewable fuel production on a commercial scale.

Anisotropic Self-Assembly of Asymmetric Mesoporous Hemispheres with Tunable Pore Structures at Liquid-Liquid Interfaces

Asymmetric materials have attracted tremendous interest because of their intriguing physicochemical properties and promising applications, but endowing them with precisely controlled morphologies and porous structures remains a formidable challenge. Herein, a facile micelle anisotropic self-assembly approach on a droplet surface is demonstrated to fabricate asymmetric carbon hemispheres with a jellyfish-like shape and radial multilocular mesostructure. This facile synthesis follows an interface-energy-mediated nucleation and growth mechanism, which allows easy control of the micellar self-assembly behaviors from isotropic to anisotropic modes. Furthermore, the micelle structure can also be systematically manipulated by selecting different amphiphilic triblock copolymers as a template, resulting in diverse novel asymmetric nanostructures, including eggshell, lotus, jellyfish, and mushroom-shaped architectures. The unique jellyfish-like hemispheres possess large open mesopores (∼14 nm), a high surface area (∼684 m² g^-1), abundant nitrogen dopants (∼6.3 wt %), a core-shell mesostructure and, as a result, manifest excellent sodium-storage performance in both half and full-cell configurations. Overall, our approach provides new insights and inspirations for exploring sophisticated asymmetric nanostructures for many potential applications.

Spatial Confinement Strategy for Micelle-Size-Mediated Modulation of Mesopores in Hierarchical Porous Carbon Nanosheets with an Efficient Capacitive Response

Commercial supercapacitors using available carbon products have long been criticized for the under-utilization of their prominent specific surface area (SSA). In terms of carbonaceous electrode optimization, excessive improvement in SSA observed in the gaseous atmosphere might have little effect on the final performance because cracked/inaccessible pore alleys considerably block the direct electrolyte ion transport in a practical electrochemical environment. Herein, mesopore-adjustable hierarchically porous carbon nanosheets are fabricated based on a micelle-size-mediated spatial confinement strategy. In this strategy, hydrophobic trimethylbenzene in different volumes of the solvent can mediate the interfacial assembly with a carbon precursor and porogen segment through π-π bonding and van der Waals interaction to yield micelles with good dispersity and the diameter varying from 119 to 30 nm. With an increasing solvent volume, the corresponding diffusion coefficient (3.1-14.3 m2 s-1) of as-obtained smaller micelles increases, which makes adjacent micelles gather rapidly and then grow along the radial direction of oligomer aggregates to eventually form mesopores on hierarchically porous carbon nanosheets (MNC150-4.5). Thanks to the pore-expansion effect of trimethylbenzene, the mesoporous volume can be adjusted from 28.8 to 40.0%. Mesopores on hierarchically porous carbon nanosheets endow MNC150-4.5 with an enhanced electrochemically active surface area of 819.5 m2 g-1, which gives rise to quick electrolyte accessibility and a correspondingly immediate capacitive response of 338 F g-1 at 0.5 A g-1 in a three-electrode system. Electrolyte transport through pathways within MNC150-4.5 ultimately enables the symmetric cell to deliver a high energy output of 50.4 Wh kg-1 at 625 W kg-1 in a 14 m LiOTF electrolyte and 95% capacitance retention after 100,000 cycles, which show its superior electrochemical performance over representative carbon-based supercapacitors with aqueous electrolytes in recent literature.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Porous carbon architectures with different dimensionalities for lithium metal storage

Lithium metal batteries have recently gained tremendous attention owing to their high energy capacity compared to other rechargeable batteries. Nevertheless, lithium (Li) dendritic growth causes low Coulombic efficiency, thermal runaway, and safety issues, all of which hinder the practical application of Li metal as an anodic material. In this review, the failure mechanisms of Li metal anode are described according to its infinite volume changes, unstable solid electrolyte interphase, and Li dendritic growth. The fundamental models that describe the Li deposition and dendritic growth, such as the thermodynamic, electrodeposition kinetics, and internal stress models are summarized. From these considerations, porous carbon-based frameworks have emerged as a promising strategy to resolve these issues. Thus, the main principles of utilizing these materials as a Li metal host are discussed. Finally, we also focus on the recent progress on utilizing one-, two-, and three-dimensional carbon-based frameworks and their composites to highlight the future outlook of these materials.

Lens-Shaped Carbon Particles with Perpendicularly-Oriented Channels for High-Performance Proton Exchange Membrane Fuel Cells

Two-dimensional sheet-like mesoporous carbon particles are promising for maximizing the number of active sites and the mass transport efficiency of proton exchange membrane fuel cells (PEMFCs). Herein, we develop a series of lens-shaped mesoporous carbon (LMC) particles with perpendicularly oriented channels (diameter = 60 nm) and aspect ratios (ARs) varying from 2.1 to 6.2 and apply them for the fabrication of highly efficient PEMFCs. The membrane emulsification affords uniform-sized, lens-shaped block copolymer particles, which are successfully converted into the LMC particles with well-ordered vertical channels through hyper-cross-linking and carbonization steps. Then, an ultralow amount (1 wt %) of platinum (Pt) is loaded into the particles. The LMC particles with higher ARs are packed with a higher density in the cathode and are better aligned on the cathode surface compared to the LMC particles with lower ARs. Thus, the well-ordered channels in the particles facilitate the mass transport of the reactants and products, significantly increasing the PEMFC performance. For example, the LMC particles with the AR of 6.2 show the highest initial single cell performance of 1135 mW cm^-2, and the cell exhibits high durability with 1039 mW cm^-2 even after 30 000 cycles. This cell performance surpasses that of commercial Pt/C catalysts, even at 1/20 of the Pt loading.

Application of the experimental design in the optimization of a procedure for antimony (Sb) remediation in environmental samples employing mesoporous array

This study describes the sustainable and eco-friendly synthesis of the silica-based mesoporous structure from the use of alternative amorphous silica extracted from rice husk ash (RHA). The mesoporous material was called MCM-48 (RHA), and its application as adsorbent to the antimony (Sb) remediation in environmental samples was tested. The adsorbent was prepared by an efficient and sustainable hydrothermal method, which exhibited an amorphous framework with type IV isotherms and type H1 hysteresis, and surface area, total pore volume, and pore diameter values of 820.9 m² g^-1, 0.6 cm³ g^-1, and 3.7 nm, respectively. In addition, the MCM-48 (RHA) exhibited a three-dimensional cubic mesostructure (Ia3d space-group symmetry) with a narrow mesopore distribution, uniform spherical particles, and well-defined architecture. Multivariate optimization using a factorial design (2⁴) was employed in the adsorption tests of Sb. The variables evaluated and the optimum conditions obtained were (i) adsorbent mass (45 mg); (ii) adsorption time (115 min); (iii) pH 2; and (iv) Sb initial concentration of 8 mol L^-1. In these conditions, we found a maximum adsorption efficiency of Sb in the order of 95%. The adsorbent material proposed in this study proved to be efficient for Sb remediation in water samples under different experimental conditions. A total of five samples were analyzed and Sb concentrations on the order of 8 ppm were added, in which a removal efficiency of Sb raging between 88 and 96% was obtained for the remediation in real samples. In addition, the low cost of the synthesis of MCM-48 (RHA) in combination with its high and fast adsorption capacities offers a great promise for wastewater remediation, which makes it very attractive for environmental approaches.

Promoting Oxygen Reduction via Crafting Bridge-bonded Oxygen Ligands on Iron Single-Atom Catalyst

Single-atom Fe-N-C catalysts with Fe-N4 coordination structures hailed as the most promising candidates are prohibited by the severe aggregation and migration of metal atoms. Bonding confine strategies can effectively regulate...

Amin M, Kaneti Y, Suendo V. Role of Urea on Structural, Textural, and Optical Properties of Macroemulsion-assisted Synthesized Holey ZnO Nanosheets for Photocatalytic Applications

Using a macroemulsion-assisted solvothermal method, the present study produces holey ZnO nanosheets exhibiting the hexagonal wurtzite crystal structure. In the synthetic process, urea is employed as a hydrolyzing agent. Its...

Inclusion of organic species in exfoliated montmorillonite nanolayers towards hierarchical functional inorganic-organic nanostructures

Montmorillonite (Mt) can readily undergo spontaneous delamination or exfoliation into nanolayers by various physical and chemical processes, which allow various strategies to engineer hierarchical functional inorganic-organic nanostructures. This review aims to discuss the recent progress in the liquid-phase exfoliation of Mt into individual nanolayers and the inclusion chemistry of functional organic species, ions, or molecules into the exfoliated Mt nanolayers to produce hierarchical functional inorganic-organic nanostructures. The exfoliation methods include mechanical force, ultrasonication, and intercalation-assisted exfoliation. Techniques for quickly assessing the quality of the exfoliated Mt nanolayers are still needed. Layer-by-layer (LbL) deposition, template, and evaporation-induced inclusions are examined to fabricate hierarchical Mt-organic species nanocomposites with unique functionalities and properties. The nanocomposites can be produced as multilayered porous films, brick-and-mortar coatings, hydrogels with a house-of-cards structure, core-shell materials, and hollow and mesoporous spherical nanocomposites, which exhibit significant potential for adsorption, catalysis, targeted delivery and controlled drug release, highly sensitive sensors, flame retardant coatings, and thermal energy storage and release (i.e. phase change materials). Finally, the challenges and prospects for the future development of hierarchical nanocomposites of exfoliated Mt nanolayers and organic species, particularly in hierarchical supramolecular nanostructured composites, are highlighted.

Interface-Induced Self-Assembly Strategy Toward 2D Ordered Mesoporous Carbon/MXene Heterostructures for High-Performance Supercapacitors

Two-dimensional transition metal carbonitrides (MXene) have demonstrated great potential in many fields. However, the serious aggregation and poor thermodynamic stability of MXene greatly hinder their applications. Here, an interface-induced self-assembly strategy to synthesize ordered mesoporous carbon/Ti₃ C₂ T_x heterostructures (OMCTs) was developed. In this method, the composite monomicelles formed by Pluronic F127 and low-molecular-weight phenolic resol self-assembled on the surface of Ti₃ C₂ T_x to prevent the restacking of Ti₃ C₂ T_x and maintain its thermostability. The obtained OMCTs possessed high specific surface areas (259-544 m²  g^-1 ), large pore volumes (0.296-0.481 cm³  g^-1 ), and excellent thermodynamic stability (up to 600 °C). Benefiting from these advantages, OMCTs serving as the electrode materials for supercapacitor exhibited superior supercapacitor performances, including high capacitance of 247 F g^-1 at 0.2 A g^-1 , satisfactory rate performance of 190 F g^-1 at 5 A g^-1 , and cyclability.

Electrochemical reductive remediation of trichloroethylene contaminated groundwater using biomimetic iron-nitrogen-doped carbon

Electrochemical dechlorination is a prospective strategy to remediate trichloroethylene (TCE)-contaminated groundwater. In this work, iron-nitrogen-doped carbon (FeNC) mimicking microbiological dechlorination coenzymes was developed for TCE removal under environmentally related conditions. The biomimetic FeNC-900, FeNC-1000, and FeNC-1100 materials were synthesized via pyrolysis at different temperatures (900, 1000, and 1100 °C). Due to the synergistic effect of Fe-N₄ active sites and graphitic N sites, FeNC-1000 had the highest electron transfer efficiency and the largest electrochemical active surface area among the as-synthesized FeNC catalysts. The pseudo-first-order rate constants for TCE reduction using FeNC-1000 catalyst are 0.19, 0.28 and 0.36 h^-1 at potentials of -0.8 V, -1.0 V and -1.2 V, respectively. Active hydrogen and direct electrons transfer both contribute to the dechlorination from TCE to C₂H₄ and C₂H₆. FeNC maintain a high reactivity after five reuse cycles. Our study provides a novel approach for the dechlorination of chlorinated organic contaminants in groundwater.

From Co-MOF to CoNi-MOF to Ni-MOF: A Facile Synthesis of 1D Micro-/Nanomaterials

Controlling the growth of metal-organic frameworks (MOFs) at the micro-/nanoscopic scale will result in new physical properties and novel functions into the materials without changing the chemical identities and the characteristic features of the MOFs themselves. Herein, we report a facile approach to synthesize a series of MOFs [Co-MOF, Co_xNi_y-MOFs (x and y represent the molar ratio of Co²⁺ and Ni²⁺ and x/y = 1:1, 1:5, 1:10, 1:15, and 1:20), and Ni-MOF] with a one-dimensional micro-/nanoscaled rod-like architecture. From Co-MOF to Co_xNi_y-MOFs to Ni-MOF, the diameters of the rods turn to be spindly with the increase of Ni²⁺ content which will facilitate the supercapacitor performances. Interestingly, Co₁Ni₂₀-MOF exhibits a highest specific capacity of 597 F g^-1 at 0.5 A g^-1 and excellent cycle performance (retained 93.59% after 4000 cycles) among these MOF materials owing to its micro-/nanorod structure with a smaller diameter and the synergy effect between the optimum molar ratio of Co²⁺ and Ni²⁺.

3D hierarchical porous carbon matching ionic liquid with ultrahigh specific surface area and appropriate porous distribution for supercapacitors

Supercapacitors, as one of the most promising energy storage devices, have high power density but low energy density. An appropriate collocation of porous carbon electrodes and ionic liquid electrolytes can improve notably the performance of supercapacitors. Herein, we report a pre-assembly strategy to prepare three-dimensional (3D) hierarchical porous carbons (HPCs) as the electrode materials for supercapacitors. Three long-chain hydrophilic polymers polyacrylamide (PAM)/gelatin/F127 in water form 3D frameworks by pre-assembly and further form a hydrogel. Then the hydrogel is freeze-dried, carbonized, and etched to form 3D hierarchical porous carbons. The effects of pore volume, pore size, and ratio of mesopores to micropores on the performance of ionic liquid-based supercapacitors are investigated. The porous structure of the prepared HPCs can well match EMIMBF₄. Therefore, HPCs as electrode materials for supercapacitors exhibit an excellent specific capacity of 216.5 F g^-1 at 1 A g^-1, and the as-assembled symmetric supercapacitor delivers a superior energy density of 108.6 W h kg^-1 at a power density of 961.1 W kg^-1. Meanwhile, the symmetric supercapacitor maintains 84.4% of its initial capacitance after 10 000 cycles at 3 A g^-1. This work provides a guide for developing new porous carbon materials for supercapacitors with a high energy density.

L-Dopa release from mesoporous silica nanoparticles engineered through the concept of drug-structure-directing agents for Parkinson's disease

Parkinson's disease (PD) is a progressive neurodegenerative disease, the 2nd most common after Alzheimer's disease, the main effect of which is the loss of dopaminergic neurons. Levodopa or l-Dopa is an amino acid used in the treatment of PD that acts as the immediate precursor to dopamine. However, over time the efficacy of the medication gradually decreases requiring modified delivery methods. One of the major challenges for the medication to work is to achieve a gradual continuous supply of l-Dopa to the brain to minimise symptoms. Herein, mesoporous silica nanoparticles (MSNs) were engineered through the concept of drug-structure-directing agents (DSDAs) with inherent therapeutic activity. The DSDA used was l-Dopa drug modified by amidation with fatty acids to build anionic surfactants that were able to form micelles as templates for the assembly of inorganic precursors to form the silica framework. This templating route produced MSNs with tunable sizes ranging from 100 nm to 1 μm and with different shapes: spherical, with either solid structures with radial mesopores and porous shells, or hollow-shells with inside large void cavities; and elongated, characterized by long hollows covered by mesoporous shells. The concept of using DSDAs to synthesize drug nanocarriers can be used to avoid the surfactant removal and subsequent drug loading steps involved in the synthesis of conventional MSNs. We hypothesized that the l-Dopa released from MSN materials is mediated by the size and solubility of the DSDAs, and the surface chemical interactions between the DSDAs and MSN hosts. Different pHs (acidic and neutral) simulating gastrointestinal tract conditions were tested, and the results showed hardly any release for gastric conditions at pH 1.2, avoiding the premature release in the stomach typical of conventional MSNs, while for intestinal conditions of pH 7.4, the release of l-Dopa occurred in a continuous and sustained manner, which is well suited to the drug's application and delivery route, and matches well with achieving a sustained l-Dopa delivery to relief symptoms. This could open up new uses for MSNs synthesized by this approach to treat PD.

Obtaining of Mesoporous Aluminosilicates with High Hydrothermal Stability by Composite Organic Templates: Utility and Mechanism

We have reported the synthesis of mesoporous aluminosilicates (MAs) with high hydrothermal stability via assembly of basic characteristic structure units of typical microporous zeolite Y. In spite of this, high consumption of organic template and H₂O remains a major obstacle to its industrial application. Herein, a facile and effective strategy called "composite templates" was employed to decrease significantly the amount of P123 and H₂O. In this method, composite micelles of P123/poly(vinyl alcohol) (PVA) could be more easily dispersed in the solution due to the lowering of water's surface tension caused by the free hydroxyl groups of PVA. Moreover, the improved assembly ability of composite micelles in high concentration solution leads to the synthesis of hydrothermally stable MAs with 45% decrease of organic template P123 and 81% that of water amount. It was found that by the introduction of composite templates, the textural properties such as the surface area of materials, volume of pore, size of pore, and thickness were enlarged simultaneously. Meanwhile, this article presented an understanding into the assembly of composite micelles in the process of synthesis of MAs.

Wiggling Mesopores Kinetically Amplify the Adsorptive Separation of Propylene/Propane

Adsorptive separation is an appealing technology for propylene and propane separation; however, the challenge lies in the design of efficient adsorbents which can distinguish the two molecules having very similar properties. Here we report a kinetically amplified separation by creating wiggling mesopores in structurally robust carbon monoliths. The wiggling mesopores with alternating wide and narrow segments afford a surface area of 413 m²  g^-1 and a tri-modal pore size distribution centered at 1.5, 4.2 and 6.6 nm, respectively. The synergistically kinetic and equilibrium effects were observed and quantitatively assessed, which together ensured a remarkable propylene/propane selectivity up to 39. This selectivity outperformed not only the available carbon adsorbents but also highly competitive among the dominated crystalline porous adsorbents. In addition, the wiggling mesoporous carbon adsorbent showed excellent dynamical separation stability, which ensured its great potential in practical molecular separations.

Photoelectrocatalytic degradation of deoxynivalenol on CuO-Cu2O/WO3 ternary film: Mechanism and reaction pathways

A ternary film of CuO-Cu₂O/WO₃ possessing high visible-light photoelectrocatalytic (PEC) performance was prepared for degradation of deoxynivalenol (DON). In such a ternary film, the introduction of CuO-Cu₂O significantly promoted the absorption of WO₃ in the visible region and reduced the recombination of photogenerated charge carriers. As a result, the CuO-Cu₂O/WO₃ film exhibited high photoelectrochemical activity under visible light illumination. The PEC performance of CuO-Cu₂O/WO₃ film was evaluated by the decoloration of Rhodamine B. The result indicated that the CuO-Cu₂O/WO₃ film exhibited higher PEC activity than WO₃ or CuO-Cu₂O film. When the CuO-Cu₂O/WO₃ film was applied to study the removal of DON, the degradation efficiency reached 87.6% after 180-min PEC treatment. According to reactive oxygen species detected by electron spin resonance analysis, a Z-scheme and type-II PEC mechanism was proposed for this ternary film. Furthermore, the intermediates formed during the PEC degradation process of DON were separated by high-performance liquid chromatography and identified with liquid chromatography-mass spectrometry. On the basis of sixteen intermediate products identified, we proposed a degradation pathway for DON in such a PEC system.

In situ interfacial architecture of lithium vanadate-based cathode for printable lithium batteries

Most Li₃VO₄ anodes are obtained by pre-architecture methods in which Li₃VO₄ anode materials are prepared with more than six key processes including high-temperature annealing and long preparation time. Herein, we propose an in situ post-architecture strategy including Li₃VO₄-precursor solution (ink) preparation and then annealing at 250°C. The integrated Li₃VO₄ based electrode not only possesses good electrical conductivity and porous microstructure but also has superior stability because of Cu anchoring and inclusion by in situ catalysis. The integrated electrode demonstrates a high reversible capacity (865 mA h g^-1 at 0.2 A g^-1) and good cyclability (100% capacity retention after 200 cycles at 1 A g^-1). More importantly, the post-architecture electrode has a high energy density of 773.8 Wh kg^-1, much higher than reported Li₃VO₄-based materials, as well as most cathodes. Therefore, the electrode could be used to the printable cathode of low-voltage high-energy-density lithium batteries.