Surface-Adsorbed Carboxylate Ligands on Layered Double Hydroxides/Metal-Organic Frameworks Promote the Electrocatalytic Oxygen Evolution Reaction

Unraveling the crucial contribution of additive chromate to efficient and stable alkaline seawater oxidation on Ni-based layered double hydroxides

Seawater electrolysis to generate hydrogen offers a clean, green, and sustainable solution for new energy. However, the catalytic activity and durability of anodic catalysts are plagued by the corrosion and competitive oxidation reactions of chloride in high concentrations. In this study, we find that the additive CrO42- anions in the electrolyte can not only promote the formation and stabilization of the metal oxyhydroxide active phase but also greatly mitigate the adverse effect of Cl- on the anode. Linear sweep voltammetry, accelerated corrosion experiments, corrosion polarization curves, and charge transfer resistance results indicate that the addition of CrO42- distinctly improves oxygen evolution reaction (OER) kinetics and corrosion resistance in alkaline seawater electrolytes. Especially, the introduction of CrO42- even in the highly concentrated NaCl (2.5 M) electrolyte prolongs the durability of NiFe-LDH to almost five times the case without CrO42-. Density functional theory calculations also reveal that the adsorption of CrO42- can tune the electronic configuration of active sites of metal oxyhydroxides, enhance conductivity, and optimize the intermediate adsorption energies. This anionic additive strategy can give a better enlightenment for the development of efficient and stable oxygen evolution reactions for seawater electrolysis.

Accelerated Dynamic Reconstruction in Metal-Organic Frameworks with Ligand Defects for Selective Electrooxidation of Amines to Azos Coupling with Hydrogen Production

Electrosynthesis coupled hydrogen production (ESHP) mostly involves catalyst reconstruction in aqueous phase, but accurately identifying and controlling the process is still a challenge. Herein, we modulated the electronic structure and exposed unsaturated sites of metal-organic frameworks (MOFs) via ligand defect to promote the reconstruction of catalyst for azo electrosynthesis (ESA) coupled with hydrogen production overall reaction. The monolayer Ni-MOFs achieved 89.8 % Faraday efficiency and 90.8 % selectivity for the electrooxidation of 1-methyl-1H-pyrazol-3-amine (Pyr-NH2) to azo, and an 18.5-fold increase in H2 production compared to overall water splitting. Operando X-ray absorption fine spectroscopy (XAFS) and various in situ spectroscopy confirm that the ligand defect promotes the potential dependent dynamic reconstruction of Ni(OH)2 and NiOOH, and the reabsorption of ligand significantly lowers the energy barrier of rate-determining step (*Pyr-NH to *Pyr-N). This work provides theoretical guidance for modulation of electrocatalyst reconstruction to achieve highly selective ESHP.

Spatially Confined Radical Addition Reaction for Electrochemical Synthesis of Carboxylated Graphene and its Applications in Water Desalination and Splitting

Due to the chemical stability of graphene, synthesis of carboxylated graphene still remains challenging during the electrochemical exfoliation of graphite. In this work, a spatially confined radical addition reaction which occurs in the sub-nanometer scaled interlayers of the expanded graphene sheets for the electrochemical synthesis of highly stable carboxylated graphene is reported. Here, formate anions act as both intercalation ions and co-reactant acid for the confinement of electro-generated carboxylic radical (●COOH) in the sub-nanometer scaled interlayers, which facilitates the radical addition reaction on graphene sheets. The controllable carboxylation of graphene is realized by tuning the concentration of formate anions in the electrolyte solution. The high crystallinity of the obtained product indicates the occurrence of spatially confined ●COOH addition reaction between the sub-nanometer interlayers of expanded graphite. In addition, the carboxylated graphene have been used for water desalination and hydrogen/oxygen reduction reaction. Therefore, this work provides a new method for the in situ preparation of functionalized graphene through the electrolysis and its applications in water desalination and hydrogen/oxygen reduction reactions.

Construction of Core-Shelled Covalent/Metal-Organic Frameworks for Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is the half-reaction in zinc-air batteries and water splitting. Developing highly efficient catalysts toward OER is a challenge due to the difficulty of removing four electrons from two water molecules. Covalent organic frameworks (COFs) provide the new chance to construct the highly active catalysts for OER, because they have controlled skeletons, porosities, and well-defined catalytic sites. In this work, core-shell hybrids of COF and metal-organic frameworks (MOFs) have first demonstrated to catalyze the OER. The synergetic effects between the COF-shell and MOF-core render the catalyst with higher activity than those from the COF and MOF. And the catalyst achieved an overpotential of 328 mV, with a Tafel slope of 43.23 mV dec-1 in 1 m KOH. The theoretical calculation revealed that the high activity is from the Fe sites in the catalyst, which has suitable binding ability of reactant intermediate (OOH*), and thus contributed high activity. This work gives a new insight to designing COFs in electrochemical energy storage and conversion systems.

Structural and Vibrational Properties of Carboxylates Intercalated into Layered Double Hydroxides: A Joint Computational and Experimental Study

Layered double hydroxides (LDHs) are fascinating clay-like materials that display versatile properties, making them an extremely fertile playground for diverse applications, ranging from bio-compatible materials to the pharmaceutical industry to catalysis and photocatalysis. When intercalating organic and bio-organic species between the inorganic layers, such materials are named hybrid LDHs. The structure-property relation in these systems is particularly relevant, since most of the properties of the materials may be fine-tuned if a comprehensive understanding of the microscopic structure in the interlamellar space is achieved, especially with respect to the reorganization under water uptake (swelling). In this work, we combined experiments and simulations to rationalize the behavior of LDHs intercalating three carboxylates, the general structure of which can be given as [Mg4Al2(OH)12]A2-·XH2O (with A2- = succinate, aspartate, or glutamate and X representing increasing water content). Following this strategy, we were able to provide an interpretation of the different shapes observed for the experimental water adsorption isotherms and for the evolution of the infrared carboxylate band of the anions. Apart from small differences, due to the different reorganization of the conformational space under confinement, the behavior of the two amino acids is very similar. However, such behavior is quite different in the case of succinate. We were able to describe the different response of the anions, which has a significant impact on the isotherm and on the size of the interlamellar region, in terms of a different interaction mechanism with the inorganic layer.

Rational Design of Organic Electrocatalysts for Hydrogen and Oxygen Electrocatalytic Applications

Efficient electrocatalysts are pivotal for advancing green energy conversion technologies. Organic electrocatalysts, as cost-effective alternatives to noble-metal benchmarks, have garnered attention. However, the understanding of the relationships between their properties and electrocatalytic activities remains ambiguous. Plenty of research articles regarding low-cost organic electrocatalysts started to gain momentum in 2010 and have been flourishing recently though, a review article for both entry-level and experienced researchers in this field is still lacking. This review underscores the urgent need to elucidate the structure-activity relationship and design suitable electrode structures, leveraging the unique features of organic electrocatalysts like controllability and compatibility for real-world applications. Organic electrocatalysts are classified into four groups: small molecules, oligomers, polymers, and frameworks, with specific structural and physicochemical properties serving as activity indicators. To unlock the full potential of organic electrocatalysts, five strategies are discussed: integrated structures, surface property modulation, membrane technologies, electrolyte affinity regulation, and addition of anticorrosion species, all aimed at enhancing charge efficiency, mass transfer, and long-term stability during electrocatalytic reactions. The review offers a comprehensive overview of the current state of organic electrocatalysts and their practical applications, bridging the understanding gap and paving the way for future developments of more efficient green energy conversion technologies.

Construction of Heterojunction-Rich Metal Nitrides Porous Nanosheets Electrocatalyst for Alkaline Water/Seawater Splitting at Large Current Density

The exploiting electrocatalysts for water/seawater electrolysis with remarkable activity and outstanding durability at industrial grade current density remains a huge challenge. Herein, CoMoNx and Fe-doped CoMoNx nanosheet arrays are in-situ grown on Ni foam, which possess plentiful holes, multilevel heterostructure, and lavish Co5.47 N/MoN@NF and Fe-Co5.47 N/MoN@NF interfaces. They require low overpotentials of 213 and 296 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under alkaline media to achieve current density of 800 mA cm-2 , respectively, and both possess low Tafel slopes (51.1 and 49.1 mV dec-1 ) and undiminished stability over 80 h. Moreover, the coupled Co5.47 N/MoN@NF and Fe-Co5.47 N/MoN@NF electrolyzer requires low voltages of 1.735 V to yield 500 mA cm-2 in alkaline water. Notably, they also exhibit exceptional electrocatalytic properties in alkaline seawater (1.833 V@500 mA cm-2 ). The experimental studies and theoretical calculations verify that Fe doping does reduce the energy barrier from OH* to O* intermediates during OER process after catalyst reconstruction, and the non-metallic N site from MoN exhibits the lowest theoretical overpotential. The splendid catalytic performance is attributed to the optimized local electron configuration and porous structure. This discovery provides a new design method toward low-cost and excellent catalysts for water/seawater splitting to produce hydrogen.

Interfacial Interaction in NiFe LDH/NiS2/VS2 for Enhanced Electrocatalytic Water Splitting

A bifunctional electrocatalyst with high efficiency and low costs for overall water splitting is critical to achieving a green hydrogen economy and coping with the energy crisis. However, developing robust electrocatalysts still faces huge challenges, owing to unsatisfactory electron transfer and inherent activity. Herein, NiFe LDH/NiS2/VS2 heterojunctions have been designed as freestanding bifunctional electrocatalysts to split water, exhibiting enhanced electron transfer and abundant catalytic sites. The optimum NiFe LDH/NiS2/VS2 electrocatalyst exhibits a small overpotential of 380 mV at 10 mA cm-2 for overall water splitting and superior electrocatalytic performance in both hydrogen and oxygen evolution reactions (HER/OER). Specifically, the electrocatalyst requires overpotentials of 76 and 286 mV at 10 mA cm-2 for HER and OER, respectively, in alkaline electrolytes, which originate from the synergistic interaction among the facilitated electron transfer and increasingly exposed active sites due to the modulation of interfaces and construction of heterojunctions.

Self-etching assembly of designed NiFeMOF nanosheet arrays as high-efficient oxygen evolution electrocatalyst for water splitting

2D metal-organic frameworks (MOFs) have emerged as potential candidates for electrocatalytic oxygen evolution reactions (OER) due to their inherent properties like abundant coordination unsaturated active sites and efficient charge transfer. Herein, a versatile and massively synthesizable self-etching assembly strategy wherein nickel-iron foam (NFF) acts as a substrate and a metal ion source. Specifically, by etching the nickel-iron foam (NFF) surface using ligands and solvents, Ni/Fe metal ions are activated and subsequently reacted under hydrothermal conditions, resulting in the formation of self-supporting nanosheet arrays, eliminating the need for external metal salts. The obtained 33 % NiFeMOF/NFF exhibits remarkable OER performance with ultra-low overpotentials of 188/231 mV at 10/100 mA cm-2 , respectively, outperforming most recently reported catalysts. Besides, the built 33 % NiFeMOF/NFF(+) ||Pt/C(-) electrolyzer presents low cell voltages of 1.55/1.83 V at 10/100 mA cm-2 , superior to the benchmark RuO2 (+) ||Pt/C(-) , implying good industrialization prospects. The excellent catalytic activity stems from the modulation of the electronic spin state of the Ni active site by the introduction of Fe, which facilitates the adsorption process of oxygen-containing intermediates and thus enhances the OER activity. This innovative approach offers a promising pathway for commercial-scale sustainable energy solutions.

Design Principles of Single-Atom Catalysts for Oxygen Evolution Reaction: From Targeted Structures to Active Sites

Hydrogen production from electrolytic water electrolysis is considered a viable method for hydrogen production with significant social value due to its clean and pollution-free nature, high hydrogen production efficiency, and purity, but the anode oxygen evolution reaction (OER) process is complex and kinetically slow. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites often exhibit high catalytic activity and are expected to be extensively applied. The catalytic performance of OER can be further improved by precise regulation of the structure through electronic effects, coordination environment, heteroatomic doping, and so on. In this review, the mechanisms of OER under different conditions are introduced, the latest research progress of SACs in the field of OER is systematically summarized, and then the effects of various structural regulation strategies on catalytic performance are discussed, and principles and ideas for the design of SACs for OER are proposed. In the end, the outstanding issues and current challenges in this field are summarized.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Highly Ordered Hierarchical Macro-Mesoporous Carbon-Supported Cobalt Electrocatalyst for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) and their derivatives have been extensively employed in Oxygen Evolution Reaction (OER) catalysts due to their significantly larger specific surface areas, distinct metal centers, and well-organized porous structures. However, the microporous structure of MOFs and their derivatives presents mass transfer resistance, limiting their further development. Drawing inspiration from hierarchical structures allowing for the transport and exchange of substances in the biological world, we designed and fabricated biomimetic layered porous structures within ZIF-67 and its derivatives. Based on this, we achieved a three-dimensional ordered layered porous nitrogen-doped carbon-coated magnetic cobalt catalyst (3DOLP Co@NDC) with a biomimetic pore structure. It is found that the 3DOLP Co@NDC (352 mV @10 mA cm-1 ) was better than Co@NDC (391 mV @10 mA cm-1 ). The introduction of a three-dimensional ordered layered porous structure is conducive to increasing the specific surface area of the material, increasing the electrochemical active area, and improving the catalytic performance of the material. The introduction of a three-dimensional ordered layered porous structure would help to build a bionic grade pore structure. The existence of biomimetic grade pore structure can effectively reduce the mass transfer resistance, improve the material exchange efficiency, and accelerate the reaction kinetics.

Electrochemical surface reconstruction of Prussian blue-modified nickel sulfide to form iron-nickel bilayer hydroxyl oxides for efficient and stable oxygen evolution reaction processes

The oxygen evolution reaction (OER) is an important semi-reaction in the electrocatalytic water splitting for hydrogen energy production, and the development of efficient and low-cost electrocatalysts to solve the problem of slow 4-electron transport kinetics in the OER process is key. In this work, a pre-electrocatalyst with the heterogeneous interfacial structure, Prussian blue-modified nickel sulfide with sulfur vacancies (PB/NS-Sv), was designed and then converted to iron-nickel bilayer hydroxyl oxides in oxygen-rich vacancies (FeOOH/NiOOH-Ov@NS) through electrochemical oxidative reconstruction to obtain a truly stable and efficient active material. The study utilized in situ Raman to observe the transition from PB/NS-Sv to FeOOH/NiOOH-Ov@NS during the reaction. The electronic density of states in FeOOH/NiOOH-Ov@NS is regulated by the bilayer hydroxyl metal oxide synergistic effect and the abundant oxygen defect of Mental-OOH-Ov, which significantly improves OER catalytic performance. FeOOH/NiOOH-Ov@NS requires a low overpotential of only 257 mV in 1 mol/L KOH at 100 mA cm-2 current density, has a small Tafel slope of 35.2 mV dec-1 and has excellent stability for 150 h at 100 mA cm-2 current density, making it a promising candidate for industrial applications.

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO2 reduction reaction (CO2 RR) over Cu catalysts exhibits enormous potential for efficiently converting CO2 to ethylene (C2 H4 ). However, achieving high C2 H4 selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO2 RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO2 reduction to C2 H4 products. An excellent Faraday efficiency (FE) of 63.6 % on C2 H4 with a current density of 497.2 mA cm-2 in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH4 . The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cuδ+ during the CO2 RR. Furthermore, theoretical calculations demonstrate that the Cuδ+ /Cu0 interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C2 H4 production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO2 reduction to value-added chemicals.

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Solar-driven water splitting powered by photovoltaics enables efficient storage of solar energy in the form of hydrogen fuel. In this work, we demonstrate efficient solar-to-hydrogen conversion using perovskite (PVK) tandem photovoltaics and a halogen-modulated metal-organic framework (MOF) electrocatalyst. By substituting tetrafluoroterephthalate (TFBDC) for terephthalic (BDC) ligands in a nickel-based MOF, we achieve a 152 mV improvement in oxygen evolution reaction (OER) overpotential at 10 mA·cm2. Through X-ray photoelectron spectroscopy (XPS), X-ray adsorption structure (XAS) analysis, theoretical simulation, and electrochemical results, we demonstrated that the introduction of fluorine atoms enhanced the intrinsic activity of Ni sites as well as the transfer property and accessibility of the MOF. Using this electrocatalyst in a bias-free photovoltaic electrochemical (PV-EC) system with a PVK/organic tandem solar cell, we achieve 6.75% solar-to-hydrogen efficiency (ηSTH). We also paired the electrocatalyst with a PVK photovoltaic module to drive water splitting at 206.7 mA with ηSTH of 10.17%.

Metal-organic frameworks-derived oxalate ligand modified NiCo hydroxides for enhanced electrochemical glycerol oxidation reaction

Glycerol oxidation reaction can be substituted for oxygen evolution reaction for more efficient hydrogen production due to its lower thermodynamic potential. Herein, a series of NiCo hydroxide nanosheets containing abundant Ni3+ species and surface ligands were synthesized by in-situ structural transformation of bimetallic organic frameworks in alkaline media for efficient glycerol oxidation reaction. It is found that the incorporation of Co ions increases the content of the Ni3+ species, and that the Ni/Co ratio of 1.0 lead to the optimal catalytic performance. The oxalate-modified nickel-cobalt hydroxide with the optimized Ni/Co ratio can deliver a current density of 10 mA cm-2 at 1.26 V vs. RHE (reversible hydrogen electrode), and reaches its maximum selectivity and Faradaic efficiency at 1.30 V vs. RHE. A high selectivity of 82.9% and a Faradaic efficiency of 91.0% are achieved. The high catalytic activity can be mainly attributed to the abundant Ni3+ species and surface carboxyl groups.

One-atom-thick hexagonal boron nitride co-catalyst for enhanced oxygen evolution reactions

Developing efficient (co-)catalysts with optimized interfacial mass and charge transport properties is essential for enhanced oxygen evolution reaction (OER) via electrochemical water splitting. Here we report one-atom-thick hexagonal boron nitride (hBN) as an attractive co-catalyst with enhanced OER efficiency. Various electrocatalytic electrodes are encapsulated with centimeter-sized hBN films which are dense and impermeable so that only the hBN surfaces are directly exposed to reactive species. For example, hBN covered Ni-Fe (oxy)hydroxide anodes show an ultralow Tafel slope of ~30 mV dec-1 with improved reaction current by about 10 times, reaching ~2000 mA cm-2 (at an overpotential of ~490 mV) for over 150 h. The mass activity of hBN co-catalyst is found exceeding that of commercialized catalysts by up to five orders of magnitude. Using isotope experiments and simulations, we attribute the results to the adsorption of oxygen-containing intermediates at the insulating co-catalyst, where localized electrons facilitate the deprotonation processes at electrodes. Little impedance to electron transfer is observed from hBN film encapsulation due to its ultimate thickness. Therefore, our work also offers insights into mechanisms of interfacial reactions at the very first atomic layer of electrodes.

Defect Engineered Metal-Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc'x Fc1-x ) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1'-ferrocene dicarboxylic acid (Fc') and defective ferrocene carboxylic acid (Fc). NiFc'x Fc1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc'). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc'Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm-2 , superior to that of undefective NiFc'. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.

Preparation of Trimetallic-Organic Framework Film Electrodes via Secondary Growth for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) are promising electrocatalysts for clean energy conversion systems. However, developing MOF-based electrodes with high performance toward oxygen evolution reaction (OER) is still challenging. In this work, a series of MOF film electrodes derived from Ni-btz were prepared by employing the secondary growth strategy under solvothermal conditions. Fe and Co ions were also incorporated into the Ni-btz framework to produce a trimetallic coupling effect to obtain enhanced OER activity. The as-prepared FeCoNi-btz/NF exhibited not only good stability but also excellent OER performance under alkaline conditions. Furthermore, the possible intermediates including metal oxides and metal oxyhydroxides were confirmed by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM).

Enhanced Electrocatalytic Water Oxidation by Interfacial Phase Transition and Photothermal Effect in Multiply Heterostructured Co9 S8 /Co3 S4 /Cu2 S Nanohybrids

The rational design of advanced nanohybrids (NHs) with optimized interface electronic environment and rapid reaction kinetics is pivotal to electrocatalytic schedule. Herein, we developed a multiple heterogeneous Co9 S8 /Co3 S4 /Cu2 S nanoparticle in which Co3 S4 germinates between Co9 S8 and Cu2 S. Using high-angle annular-dark-field imaging and theoretical calculation, it was found that the integration of Co9 S8 and Cu2 S tends to trigger the interface phase transition of Co9 S8 , leading to Co3 S4 interlayer due to the low formation energy of Co3 S4 /Cu2 S (-7.61 eV) than Co9 S8 /Cu2 S (-5.86 eV). Such phase transition not only lowers the energy barrier of oxygen evolution reaction (OER, from 0.335 eV to 0.297 eV), but also increases charge carrier density (from 7.76×1014 to 2.09×1015  cm-3 ), and creates more active sites. Compared to Co9 S8 and Cu2 S, the Co9 S8 /Co3 S4 /Cu2 S NHs also demonstrate notable photothermal effect that can heat the catalyst locally, offset the endothermic enthalpy change of OER, and promote carrier migrate, reaction intermediates adsorption/deprotonation to improve reaction kinetics. Profiting from these favorable factors, the Co9 S8 /Co3 S4 /Cu2 S catalyst only requires an OER overpotential of 181 mV and overall water splitting cell voltage of 1.43 V to driven 10 mA cm-2 under the irradiation of near-infrared light, outperforming those without light irradiation and many reported Co-based catalysts.

Bifunctional Near-Neutral Electrolyte Enhances Oxygen Evolution Reaction

Performance of electrocatalytic reactions depends on not only the composition and structure of the active sites, but also their local environment, including the surrounding electrolyte. In this work, we demonstrate that BF2 (OH)2 - anion is the key fluoroborate species formed in the mixed KBi/KF (KBi=potassium borate) electrolyte to enhance the rate of the oxygen evolution reaction (OER) at near-neutral pH. Through a combination of electrokinetic and in situ spectroscopic studies, we show that the mixed KBi/KF electrolyte promotes the OER via two pathways: 1) stabilizing the interfacial pH during the proton-producing reaction with its high buffering capacity; and 2) activating the interfacial water via strong hydrogen bonds with F-containing species. With the KBi/KF electrolyte, electrodeposited Co(OH)2 is able to achieve 100 mA/cm2 at 1.74 V, which is among the highest reported activities with earth-abundant electrocatalysts at near neutral conditions. These findings highlight the potential of leveraging electrolyte-engineering for improving the electrochemical performance of the OER.

Progress in Manipulating Dynamic Surface Reconstruction via Anion Modulation for Electrocatalytic Water Oxidation

The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.

Surface Engineering over Metal-Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co-phytate coordination complex on the Ni-based metal-organic framework (MOF) nanosheet array (CC/Ni-BDC@Co-PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co-PA modification over Ni-BDC can manipulate the electronic state of Ni sites, and in situ evolved charge-redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co-PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO3 2- approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni-BDC@Co-PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm-2 , a small Tafel slope of 45 mV dec-1 , and strong durability, comparable to the best Ni-based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF-based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal-PA complex.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Electronic Structure Modulation of Nickel Sites by Cationic Heterostructures to Optimize Ethanol Electrooxidation Activity in Alkaline Solution

It is a good idea for efficient production of hydrogen to use ethanol oxidation reaction (EOR) in place of oxygen evolution reaction (OER) in water electrolysis process. Ni-based non-precious electrocatalysts are widely used in the conversion of ethanol to acetic acid. Here, different selenide heterostructures (NiCoSe, NiFeSe, and NiCuSe) are prepared in which Ni sites are regulated by transition metal. The valence state of Ni is NiCuSe < NiCoSe < NiFeSe in the three heterojunctions. NiCoSe shows the optimized charge distribution of Ni sites and outstanding catalytic activity. The effective modulations lead to optimized d-band center and facilitates both adsorption and desorption of reaction intermediates, which improves the kinetics of EOR. The results of this work prove that with appropriate designed catalyst it is possible to replace kinetically slow OER with faster EOR in water electrolysis to produce hydrogen.

Operando spectroscopies capturing surface reconstruction and interfacial electronic regulation by FeOOH@Fe2O3@Ni(OH)2 heterostructures for robust oxygen evolution reaction

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) and understanding the phase evolution in the catalytic process are vital to improving the overall efficiency of electrochemical water splitting. Herein, a hybrid heterogeneous FeOOH@Fe₂O₃@Ni(OH)₂ electrocatalyst with robust OER intrinsic activity and a low overpotential of 269 mV to obtain a current density of 100 mA cm^-2 and a Tafel slope value of 60.15 mV dec^-1 is effectively prepared. The dynamic surface evolution has been detected by in-situ Raman spectroscopy, which exposes that FeOOH@Fe₂O₃@Ni(OH)₂ is reconstituted as Ni(Fe)OOH demonstrated as catalytically active species under high potential. X-ray photoelectron spectroscopy analysis indicates that partial electrons of Ni in the heterogeneous interface transfer to Fe. Furthermore, partial Fe doping of NiOOH under high potential accompanied by the oxidized Ni³⁺ with optimized d-orbit electronic configuration for nearly unity e_g occupancy results in proper chemisorption bonding strength for oxygen reaction intermediates and is conducive to enhancing OER reaction kinetics. This work provides ideas that multicomponent heterostructure can adjust the electronic structure of iron and nickel to enhance the intrinsic activity of OER, which could help with the design and synthesis of high-performance OER catalysts used in energy storage and conversion.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

2D Metal-Organic Frameworks as Competent Electrocatalysts for Water Splitting

Hydrogen, a clean and flexible energy carrier, can be efficiently produced by electrocatalytic water splitting. To accelerate the sluggish hydrogen evolution reaction and oxygen evolution reaction kinetics in the splitting process, highly active electrocatalysts are essential for lowering the energy barriers, thereby improving the efficiency of overall water splitting. Combining the distinctive advantages of metal-organic frameworks (MOFs) with the physicochemical properties of 2D materials such as large surface area, tunable structure, accessible active sites, and enhanced conductivity, 2D MOFs have attracted intensive attention in the field of electrocatalysis. Different strategies, such as improving the conductivities of MOFs, reducing the thicknesses of MOF nanosheets, and integrating MOFs with conductive particles or substrates, are developed to promote the catalytic performances of pristine MOFs. This review summarizes the recent advances of pristine 2D MOF-based electrocatalysts for water electrolysis. In particular, their intrinsic electrocatalytic properties are detailly analyzed to reveal important roles of inherent MOF active centers, or other in situ generated active phases from MOFs responsible for the catalytic reactions. Finally, the challenges and development prospects of pristine 2D MOFs for the future applications in overall water splitting are discussed.

Passivating Oxygen Evolution Activity of NiFe-LDH through Heterostructure Engineering to Realize High-Efficiency Electrocatalytic Formate and Hydrogen Co-Production

An electrocatalytic methanol oxidation reaction (MOR) is proposed to replace oxygen evolution reaction (OER) in water electrolysis owing to the favorable thermodynamics of MOR than OER. However, there is still a competition between the MOR and the OER when the applied potential is in the conventional OER zone. How to inhibit OER while maintaining efficient MOR is an open and challenging question, and there are few reports focusing on this thus far. Herein, by taking NiFe layered double hydroxide (LDH) as a model catalyst due to its intrinsically high catalytic activity for the OER, the perspective of inhibiting OER is shown and thus promoting MOR through a heterogenous engineering of NiFe-LDH. The engineered heterostructure comprising NiFe-LDH and in situ formed NiFe-hexylaminobenzene (NiFe-HAB) coordination polymer exhibits outstanding electrocatalytic capability for methanol oxidation to formic acid (e.g., the Faradaic efficiencies (FEs) of formate product are close to 100% at various current densities, all of which are much larger than those (53-65%) on unmodified NiFe-LDH). Mechanism studies unlock the modification of NiFe-HAB passivates the OER activity of NiFe-LDH through tailoring the free energies for element reaction steps of the OER and increasing the free energy of the rate-determining step, consequently leading to efficient MOR.

Construction of Non-Precious Metal Self-Supported Electrocatalysts for Oxygen Evolution from a Low-Temperature Immersion Perspective

Water splitting is considered as a promising technology to solve energy shortage and environmental pollution. Since oxygen evolution reaction (OER) directly affects the efficiency of hydrogen evolution, the preparation of efficient and inexpensive OER catalysts is an urgent problem. "Low-temperature immersion" (LTI) is expected to be a prospective strategy for electrocatalyst preparation due to its simplicity and energy-saving advantages. However, there is almost no comprehensive overview on the progress of LTI engineering in the construction of non-precious metal self-supported electrocatalysts for OER. Herein, this review firstly introduces the principles and applications of LTI engineering-assisted preparation of non-precious metal self-supported electrocatalysts in terms of etching and deposition. Then the mechanism of OER is analyzed from an amorphous viewpoint, and finally some perspective insights and future challenges of this method are discussed.

Metal-Organic Framework Derived Ni2P/FeP@NPC Heterojunction as Stability Bifunctional Electrocatalysts for Large Current Density Water Splitting

The construction of heterojunction has been widely accepted as a prospective strategy for the exploration of non-precious metal-based catalysts that possess high-performance to achieve electrochemical water splitting. Herein, we design and prepare a metal-organic framework derived N, P-doped-carbon-encapsulated Ni₂P/FeP nanorod with heterojunction (Ni₂P/FeP@NPC) for accelerating the water splitting and working stably at industrially relevant high current densities. Electrochemical results confirmed that Ni₂P/FeP@NPC could both accelerate the hydrogen and oxygen evolution reactions. It could substantially expedite the overall water splitting (1.94 V for 100 mA cm^-2) which is close to the performance of RuO₂ and the Pt/C couple (1.92 V for 100 mA cm^-2). In particular, the durability test exhibited that Ni₂P/FeP@NPC delivers 500 mA cm^-2 without decay after 200 h, demonstrating the great potential for large-scale applications. Furthermore, the density functional theory simulations demonstrated that the heterojunction interface could give rise to the redistribution of electrons, which could not only optimize the adsorption energy of H-containing intermediates to achieve the optimal ΔG_H* in a hydrogen evolution reaction, but also reduce the ΔG value in the rate-determining step of an oxygen evolution reaction, thus improving the HER/OER performance.

Unraveling the π-interaction of NiFe-based metal-organic frameworks with enhanced oxygen evolution: Optimizing electronic structure and facilitating electron transfer modulation

Metal-organic frameworks (MOFs) with conjugation carboxylate ligands as electrocatalysts can significantly improve oxygen evolution reaction (OER), but the role of π-interaction on the reactive sites of OER is often neglected. We intend to unravel the mechanism of how π-interaction enhances OER performance. The results of Rietveld refinement, density functional theory (DFT) calculations, and in-situ Raman spectra show that π-interaction can efficiently modulate the local spin configuration of metal centers, facilitate γ-Ni_1-xFe_xOOH active species with high-valence Ni sites modified by high-spin Fe, accelerate electron transfer, optimize the d-band center together with the beneficial rate-determining step of OER. NiFe-BPDC MOFs/NF with 0.8559 eV π-interaction energy generated γ-Ni_1-xFe_xOOH in only 60 s at 1.4 V, demonstrating that π-interaction promotes the rapid generation of highly active reactive sites. Furthermore, the results of in-situ Raman and electron paramagnetic resonance (EPR) spectra reveal that the deprotonation and deoxygenation steps of OER are accompanied by changes in the oxidation state of metal ions and the generation of oxygen vacancies on the surface of catalysts. In addition, NiFe-BPDC MOFs/NF rapidly completes the deprotonation and deoxygenation steps, and it requires only 288 mV overpotential to reach 100 mA/cm² with 100 h of stability, suggesting promising industrial application.

Structural Reconstruction of Catalysts in Electroreduction Reaction: Identifying, Understanding, and Manipulating

Electroreduction transformation of small molecules (CO₂ , N₂ , and H₂ O) into chemical feedstocks offers a promising approach to eliminate carbon emissions and harness renewable energy. Most cathodic catalysts often undergo structural transformation under operating electroreduction conditions. These structural reconstructions are reflected in changes in their catalytic activity. In-depth understanding of the change of active sites and influence parameters of reconstruction behaviors is an essential precondition for the design of highly efficient catalysts. Despite the previous achievements, comprehensive insight toward the structural evolution mechanism in cathodic catalysts, compared to anode ones, under reaction conditions is still lacking. Herein, an overview of structural reconstruction for cathodic catalysts in terms of fundamental mechanisms, reconstruction process, advanced characterizations, and influencing parameters is provided. On this basis, the typical strategies for manipulating the structural reconfiguration of catalysts are also explicitly discussed from the catalyst structure and working environment. By delivering the mechanism, strategies, insights, and techniques, this review will provide a comprehensive understanding of the structural reconstruction of cathodic catalysts in electroreduction reactions and future guidelines for their rational development.

N, F Codoped FeOOH Nanosheets with Intercalated Carbonate Anions Rich in Oxygen Defects for Enhanced Alkaline Electrocatalytic Water Splitting

Alkaline water splitting is a highly efficient and clean technology for hydrogen energy generation. However, in alkaline solutions, most catalysts suffer from extreme instability. Herein, a cross-nanostructured N, F, and CO₃^2- codoped iron oxyhydroxide composite (N,F-FeO(OH)-CO₃-NF) rich in oxygen defects is designed for water splitting in the alkaline solution. X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations show that the introduction of F and CO₃^2- can induce electron redistribution around the active center Fe, accelerate the four-electron transfer process, and optimize the d-band center, thereby improving the efficiency and stability of HER and OER. In a 1 M KOH solution, N,F-FeO(OH)-CO₃-NF only needs the overpotential of 248 mV for OER and the overpotential of 199 mV for HER to reach the current density of 10 mA·cm^-2. Meanwhile, it can reach 100 mA·cm^-2 current density at 1.55 V vs RHE and maintains a current density of 10 mA·cm^-2 for 120 h in a two-electrode electrolytic water device. Compared with bulk hydroxides, the heteroatom and anion codoped composite hydroxides are more stable and have dual functions in the electrolyte solution. This is of great significance for designing a new stable water-splitting electrocatalyst.

Enhancing the catalytic OER performance of MoS2via Fe and Co doping

Enhancing the sluggish kinetics of the electrochemical oxygen evolution reaction (OER) is crucial for many clean-energy production technologies. Although much progress has been made in recent years, developing active, stable, and cost-effective OER electrocatalysts is still challenging. The layered MoS₂, based on Earth-abundant elements, is widely explored as a promising hydrogen evolution electrocatalyst but exhibits poor OER activity. Here, we report a facile strategy to improve the sluggish OER of MoS₂ through co-doping MoS₂ nanosheets with Fe and Co atoms. The synergistic effect obtained by adjusting the Co/Fe ratio in the Fe-Co doped MoS₂ induces electronic and structural modifications and a richer active surface area morphology resulting in a relatively low OER overpotential of 380 mV (at 10 mA cm^-2). The electronic modulation upon doping was further supported by DFT calculations that show favorable interaction with the OER intermediate species, thus reducing the energy barrier for the OER. This work paves the way for future strategies for tailoring the electronic properties of transition-metal dichalcogenides (TMDCs) to activate the structure for the sluggish OER with the assistance of non-noble-metal materials.

Metal-Organic Framework Integrating Ionic Framework and Bimetallic Coupling Effect for Highly Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) are recognized as promising electrocatalysts for the oxygen evolution reaction (OER) because of their permanent porosity and rich architectural diversity; however, ionic MOFs enabling fast ions exchange during OER are rarely explored. Here, an ionic MOF (Ni-btz) constructed with an azolate ligand is selected, and continuous 3D bimetallic MOF (NiFe-btz) films deriving from high-degree intergrowth of microsized MOFs particles are fabricated. The as-prepared NiFe-btz/NF-OH electrode exhibits excellent OER performance with a low overpotential of 239 mV at 10 mA cm^-2 under alkaline condition. The OER charge transfer process and bimetallic coupling effect in ionic NiFe-btz are probed by density functional theory calculations and confirmed via X-ray photoelectron spectroscopy and in situ Raman measurements. The partial density of states of NiFe-btz indicates that the main contribution for electron density around the Fermi level is from Cl ions clarifying the profitable impact of ionic MOF framework. This work systematically demonstrates the relationship of electronic structure and OER activity in ionic, bimetallic MOFs and expands the scope of 3D MOF films for efficient OER.

Multistage Electron Distribution Engineering of Iridium Oxide by Codoping W and Sn for Enhanced Acidic Water Oxidation Electrocatalysis

Developing efficient and robust anodic electrocatalysts to implement the proton-exchange membrane (PEM) electrolyzer is critical for hydrogen generation. Nevertheless, the only known applicable anode catalyst IrO_x in PEM electrolyzers still requires high overpotential due to the weak binding energy between oxygen intermediates and active sites, limiting its wide applications. Herein, a ternary Ir_0.7 W_0.2 Sn_0.1 O_x nanocatalyst synthesized through a sol-gel strategy, exhibits a low overpotential of 236 mV (10 mA cm^-2 _geo ) for thoxygen evolution reaction (OER), accompanied with robust durability over 220 h at 1 A cm^-2 _geo in 0.5 m H₂ SO₄ . Moreover, the optimized Ir_0.7 W_0.2 Sn_0.1 O_x delivers a prominent mass activity of 722.7 A g^-1 _Ir at 1.53 V (vs RHE), which is around 34 times higher compared with that of IrO_x . The mircrostructural analyses reveal that codoping of W and Sn stabilizes Ir with a valence state lower than 4+ through multistage charge redistribution, avoiding the overoxidation of Ir above 1.6 V versus RHE and enhancing the acidic OER performance. Additionally, density functional theory calculations reveal that codoping of W and Sn moves the d band center of Ir to the Fermi level, thus enhancing the binding energies of oxygen intermediates with Ir sites and decreasing the energy barrier toward acidic OER.

Transition metal atom M (M = Fe, Co, Cu, Cr) doping and oxygen vacancy modulated M-Ni5P4-NiMOH nanosheets as multifunctional electrocatalysts for efficient overall water splitting and urea electrolysis reaction

It is significant to develop reasonable and efficient hydrogen evolution reaction catalysts to alleviate the energy crisis, yet challenging to produce hydrogen through the electrolysis of water and urea. In this work, the dual control strategy of doping and vacancy creation was used to improve the electrocatalytic performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for the design of a multifunctional catalyst. A series of M-doped-Ni₅P₄/M-doped Ni(OH)₂ (M = Fe, Co, Cu, Cr) hierarchical materials with abundant oxygen vacancies was constructed for the first time by hydrothermal and partial phosphating methods. The Co-doped-Ni₅P₄/Co-doped-Ni(OH)₂ (Co-Ni₅P₄-NiCoOH) exhibited superior performance in HER, OER and urea oxidation reaction (UOR). Moreover, the electrode couple is fitted with two Co-Ni₅P₄-NiCoOH (C-NP-NCOH) electrodes to drive the current density of 10 mA cm^-2; the necessary cell voltage was 1.57 V in 1.0 M KOH with 0.5 M urea for urea electrolysis and water electrolysis required a 1.6 V cell voltage in 1.0 M KOH electrolyte, which is one of the best catalytic activities reported so far. The experimental results suggest that the co-action of Co-doping and oxygen vacancies increases the specific surface area of the material, enhances the electronic conductivity and promotes the exposure of more active sites, thus improving the water splitting and urea electrolysis performances of the catalyst. Density functional theory analysis suggests that Co-Ni₅P₄-NiCoOH displays optimal adsorption energy of water and electrical conductivity, thus optimizing the adsorption/desorption of intermediates.

Construction of NiS/Ni3S4 heteronanorod arrays in graphitized carbonized wood frameworks as versatile catalysts for efficient urea-assisted water splitting

Exploring highly efficient, robust, and stable catalysts for urea electrolysis is intensively desirable for hydrogen production but remains a challenging task. In this work, novel, well-aligned, self-supported NiS/Ni₃S₄ heteronanorod arrays deposited on graphitized carbonized wood (GCW) are designed (denoted as NiS/Ni₃S₄/GCW) and synthesized by a facile hydrothermal sulfidation strategy. Benefitting from the optimized surface hydrophilicity/aerophobicity, enhanced electrical conductivity, and 3D hierarchical directional porous architectures, the NiS/Ni₃S₄/GCW show excellent activity toward the urea oxidation reaction and hydrogen evolution reaction in alkaline electrolytes. The arrays achieved a low potential of 1.33 V (vs. RHE) and 91 mV (overpotential) at 10 mA cm^-2 as well as robust stability for 100 h. Significantly, when employed as anode and cathode simultaneously, the urea electrolyzer constructed by NiS/Ni₃S₄/GCW catalysts merely requires a low voltage of 1.44 V to drive 10 mA cm^-2 with superior stability for 50 h. This work not only demonstrates the application of heterogeneous sulfide for urea-assisted hydrogen production but also provides an effective guideline for using renewable wood for designing efficient catalysts in an economical way.

CoP Nanoparticle Confined in P, N Co-Doped Porous Carbon Anchored on P-Doped Carbonized Wood Fibers with Tailored Electronic Structure for Efficient Urea Electro-Oxidation

Electronic structure optimization and architecture modulation are widely regarded as rational strategies to enhance the electrocatalysts catalytic performance. Herein, a hybridization of ZIF-67-derived CoP nanoparticles embedded in P, N co-doped carbon matrix (PNC) and anchored on P-doped carbonized wood fibers (PCWF) is constructed using a simple simultaneous phosphorization and carbonization strategy. Benefiting from the optimized surface/interface electronic structures, abundant exposed active sites, and outstanding conductivity, the CoP@PNC/PCWF can drive the urea oxidation reaction (UOR) with greater activity and better stability than most recently reported electrocatalysts, in which a potential as low as 1.32 V (vs reversible hydrogen electrode, RHE) is needed to reach 50 mA cm^-2 and shows excellent durability. Furthermore, for overall urea splitting, using the CoP@PNC/PCWF electrocatalyst as the anode and commercial Pt/C supported on nickel foam as the cathode, an ultralow cell voltage of 1.50 V (vs RHE) is expected to achieve the 50 mA cm^-2 and operate continuously for more than 50 h at 20 mA cm^-2 . The reported strategy may shed light on the use of renewable resources to design and synthesize high-performance non-Ni-based phosphides UOR electrocatalysts for energy-saving H₂ production.

In situ formed N-containing copper nanoparticles: a high-performance catalyst toward carbon monoxide electroreduction to multicarbon products with high faradaic efficiency and current density

Developing efficient catalysts for electrochemical carbon monoxide reduction (ECOR) with high faradaic efficiency (FE) and current density is highly desirable. In this work, we demonstrate that the N-containing Cu nanoparticles formed in situ by the reconstruction of cuprous 7,7,8,8-tetracyanoquinodimethane possess high-performance ECOR ability. Impressively, the N-containing Cu nanoparticle catalyst presented the highest FE of 81.31% towards multicarbon products with a high commercial-grade partial current density of 162.62 mA cm^-2, which is among the best of the reported Cu-based ECOR catalysts at -0.69 V versus the reversible hydrogen electrode. The retained ligand on the formed catalyst via the convenient in situ formation is crucial for the selectivity of multicarbon products. This work will arouse enthusiasm for the utilization of reconstruction features for designing ligand-containing catalysts with enhanced artificial carbon fixation ability.