Advanced biofuel production in microbes

Comparative characterisation of autotrophic and heterotrophic isopropanol formation by Cupriavidus necator in shake flasks

Autotrophic cultivation offers a path to carbon-neutral bioproduction, which is increasingly valuable in the context of climate change mitigation. In this study, the production of isopropanol by Cupriavidus necator is used as an example for CO2 valorisation, and a simple shake bottle system is introduced to facilitate the development of aerobic autotrophic cultivation processes and strain screening. Applying 1.5 bar overpressure in the bottle's headspace enhances gas transfer while pressure decrease was shown to be correlated to biomass and product formation, allowing to follow metabolic activity without sampling. After optimizing cultivation parameters and nickel feeding strategy, the system was applied to compare three different isopropanol-producing strains. The highest autotrophically obtained isopropanol concentration was 2.2 ± 0.5 g L-1 with a specific yield of 0.9 ± 0.2 g gCDW-1 and a minimal by-product concentration of 0.05 ± 0.01 g L-1 acetone. Heterotrophic cultivations were carried out for comparison, obtaining up to 3.4 ± 0.2 g L-1 final isopropanol concentration with a specific yield of 1.4 ± 0.1 g gCDW-1. Although the use of CO2 instead of fructose resulted in a slower process, the overall isopropanol production is promising. This study provides valuable insights into strain behaviour while demonstrating the utility of the presented shake bottle system for advancing autotrophic process development.

Coupling genome-wide continuous perturbation with biosensor screening reveals the potential targets in yeast isopentanol synthesis network

The increasing consumption of fossil fuels is contributing to global resource depletion and environmental pollution. Branched-chain higher alcohols, such as isopentanol and isobutanol, have attracted significant attention as next-generation biofuels. Biofuel production through microbial fermentation offers a green, sustainable, and renewable alternative to chemical synthesis. While enhanced production of isopentanol has been achieved in a variety of chassis, the fermentation yield has not yet reached levels suitable for industrial-scale production. In this study, we employed a continuous perturbation tool to construct a genome-scale perturbation library, combined with an isopentanol biosensor to screen for high-yielding mutants. We identified five high-yielding mutants, each exhibiting an increased glucose conversion rate and isopentanol titer. The F2 strain, in particular, achieved an isopentanol titer of 1.57 ± 0.014 g/L and a yield of 14.04 ± 0.251 mg/g glucose (10% glucose), surpassing the highest values reported to date in engineered Saccharomyces cerevisiae. Systematic transcriptome analysis of the isopentanol synthesis, glycolysis, glycerol metabolism, and ethanol synthesis pathways revealed that MPC, OAC1, BAT2, GUT2, PDC6, and ALD4 are linked to efficient isopentanol production. Further analysis of differentially expressed genes (DEGs) identified 17 and 12 co-expressed DEGs (co-DEGs) in all mutants and the two second-round mutants, respectively. In addition, we validated the knockout or overexpression of key co-DEGs. Our results confirmed the critical roles of HOM3 and DIP5 in isopentanol production, along with genes associated with the aerobic respiratory chain (SDH3, CYT1, COX7, ROX1, and ATG41) and cofactor balance (BNA2 and NDE1). Additionally, functional analysis of the co-DEGs revealed that MAL33 is associated with the synthesis of branched-chain higher alcohols, expanding the intracellular metabolic network and offering new possibilities for green, cost-effective biofuel production.

The potential of native and engineered Clostridia for biomass biorefining

Since their first industrial application in the acetone-butanol-ethanol (ABE) fermentation in the early 1900s, Clostridia have found large application in biomass biorefining. Overall, their fermentation products include organic acids (e.g., acetate, butyrate, lactate), short chain alcohols (e.g., ethanol, n-butanol, isobutanol), diols (e.g., 1,2-propanediol, 1,3-propanediol) and H2 which have several applications such as fuels, building block chemicals, solvents, food and cosmetic additives. Advantageously, several clostridial strains are able to use cheap feedstocks such as lignocellulosic biomass, food waste, glycerol or C1-gases (CO2, CO) which confer them additional potential as key players for the development of processes less dependent from fossil fuels and with reduced greenhouse gas emissions. The present review aims to provide a survey of research progress aimed at developing Clostridium-mediated biomass fermentation processes, especially as regards strain improvement by metabolic engineering.

Stability trends in carbocation intermediates stemming from germacrene A and hedycaryol

In the current work, we analyzed the origin of difference in stabilities among the germacrene A and hedycaryol-derived carbocations. This study focused on twelve hydrocarbons derived from germacrene A and twelve from hedycaryol, which can be divided into three groups: four molecules containing 6-6 bicyclic rings, four 5-7 bicyclic compounds with the carbocation being on the seven-membered ring and the remaining four 5-7 bicyclic compounds with the carbocation on the five-membered ring. The variations in energy within the groups of carbocations (i.e., 6-6 and two kinds of 5-7 bicyclic carbocations) can be ascribed to intramolecular repulsion interactions, as seen from non-covalent interactions plots. Despite the structural similarities between germacrene A and hedycaryol cations, they possess a somewhat different stability trend. These differences are attributed to C+···OH intramolecular interactions present in some hedycaryol cations, which are absent in the carbocations derived from germecrene A.

Spatiotemporal Regulation and Transport Engineering for Sustainable Production of Geraniol in Candida glycerinogenes

Geraniol is an attractive natural monoterpene with significant industrial and commercial value in the fields of pharmaceuticals, condiments, cosmetics, and bioenergy. The biosynthesis of monoterpenes suffers from the availability of key intermediates and enzyme-to-substrate accessibility. Here, we addressed these challenges in Candida glycerinogenes by a plasma membrane-anchoring strategy and achieved sustainable biosynthesis of geraniol using bagasse hydrolysate as substrate. On this basis, a remarkable 2.4-fold improvement in geraniol titer was achieved by combining spatial and temporal modulation strategies. In addition, enhanced geraniol transport and modulation of membrane lipid-associated metabolism effectively promoted the exocytosis of toxic monoterpenes, significantly improved the resistance of the engineered strain to monoterpenes and improved the growth of the strains, resulting in geraniol yield up to 1207.4 mg L-1 at shake flask level. Finally, 1835.2 mg L-1 geraniol was obtained in a 5 L bioreactor using undetoxified bagasse hydrolysate. Overall, our study has provided valuable insights into the plasma membrane engineering of C. glycerinogenes for the sustainable and green production of valuable compounds.

Quantitative Analysis of The High-Yield Hydrolysis of Kelp by Laminarinase and Alginate Lyase

Kelp is an abundant, farmable biomass-containing laminarin and alginate as major polysaccharides, providing an excellent model substrate to study their deconstruction by simple enzyme mixtures. Our previous study showed strong reactivity of the glycoside hydrolase family 55 during hydrolysis of purified laminarin, raising the question of its reactivity with intact kelp. In this study, we determined that a combination of a single glycoside hydrolase family 55 β-1,3-exoglucanase with a broad-specificity alginate lyase from the polysaccharide lyase family 18 gives efficient hydrolysis of untreated kelp to a mixture of simple sugars, that is, glucose, gentiobiose, mannitol-end glucose, and mannuronic and guluronic acids and their soluble oligomers. Quantitative assignments from nanostructure initiator mass spectrometry (NIMS) and 2D HSQC NMR spectroscopy and analysis of the reaction time-course are provided. The data suggest that binary combinations of enzymes targeted to the unique polysaccharide composition of marine biomass are sufficient to deconstruct kelp into soluble sugars for microbial fermentation.

Metabolic Engineering of Candida glycerinogenes for Sustainable Production of Geraniol

Geraniol is a class of natural products that are widely used in the aroma industry due to their unique aroma. Here, to achieve the synthesis of geraniol and alleviate the intense competition from the yeast ergosterol pathway, a transcription factor-mediated ergosterol feedback system was developed in this study to autonomously regulate ergosterol metabolism and redirect carbon flux to geraniol synthesis. In addition, the modification of ergosterol-responsive promoters, the optimization of transcription factor expression intensity, and stepwise metabolic engineering resulted in a geraniol titer of 531.7 mg L-1. For sustainable production of geraniol, we constructed a xylose assimilation pathway in Candida glycerinogenes (C. glycerinogenes). Then, the xylose metabolic capacity was ameliorated and the growth of the engineered strain was rescued by activating the pentose phosphate (PP) pathway. Finally, we obtained 1091.6, 862.4, and 921.8 mg L-1 of geraniol in a 5 L bioreactor by using pure glucose, simulated wheat straw hydrolysates, and simulated sugarcane bagasse hydrolysates, with yields of 47.5, 57.9, and 59.1 mg g-1 DCW, respectively. Our study demonstrated that C. glycerinogenes has the potential to produce geraniol from lignocellulosic biomass, providing a powerful tool for the sustainable synthesis of other valuable monoterpenes.

Chromosomal engineering of inducible isopropanol- butanol-ethanol production in Clostridium acetobutylicum

The use of environmentally damaging petrochemical feedstocks can be displaced by fermentation processes based on engineered microbial chassis that recycle biomass-derived carbon into chemicals and fuels. The stable retention of introduced genes, designed to extend product range and/or increase productivity, is essential. Accordingly, we have created multiply marked auxotrophic strains of Clostridium acetobutylicum that provide distinct loci (pyrE, argH, purD, pheA) at which heterologous genes can be rapidly integrated using allele-coupled exchange (ACE). For each locus, ACE-mediated insertion is conveniently selected on the basis of the restoration of prototrophy on minimal media. The Clostridioides difficile gene (tcdR) encoding an orthogonal sigma factor (TcdR) was integrated at the pyrE locus under the control of the lactose-inducible, bgaR::P_bgaL promoter to allow the simultaneous control of genes/operons inserted at other disparate loci (purD and pheA) that had been placed under the control of the P_tcdB promoter. In control experiments, dose-dependent expression of a catP reporter gene was observed with increasing lactose concentration. At the highest doses tested (10 mM) the level of expression was over 10-fold higher than if catP was placed directly under the control of bgaR::P_bgaL and over 2-fold greater than achieved using the strong P_fdx promoter of the Clostridium sporogenes ferredoxin gene. The utility of the system was demonstrated in the production of isopropanol by the C. acetobutylicum strain carrying an integrated copy of tcdR following the insertion of a synthetic acetone operon (ctfA/B, adc) at the purD locus and a gene (sadh) encoding a secondary dehydrogenase at pheA. Lactose induction (10 mM) resulted in the production of 4.4 g/L isopropanol and 19.8 g/L Isopropanol-Butanol-Ethanol mixture.

Development and Perspective of Rhodotorula toruloides as an Efficient Cell Factory

Rhodotorula toruloides is receiving significant attention as a novel cell factory because of its high production of lipids and carotenoids, fast growth and high cell density, as well as the ability to utilize a wide variety of substrates. These attractive traits of R. toruloides make it possible to become a low-cost producer that can be engineered for the production of various fuels and chemicals. However, the lack of understanding and genetic engineering tools impedes its metabolic engineering applications. A number of research efforts have been devoted to filling these gaps. This review focuses on recent developments in genetic engineering tools, advances in systems biology for improved understandings, and emerging engineered strains for metabolic engineering applications. Finally, future trends and barriers in developing R. toruloides as a cell factory are also discussed.

Natural Compounds: A Hopeful Promise as an Antibiofilm Agent Against Candida Species

The biofilm communities of Candida are resistant to various antifungal treatments. The ability of Candida to form biofilms on abiotic and biotic surfaces is considered one of the most important virulence factors of these fungi. Extracellular DNA and exopolysaccharides can lower the antifungal penetration to the deeper layers of the biofilms, which is a serious concern supported by the emergence of azole-resistant isolates and Candida strains with decreased antifungal susceptibility. Since the biofilms' resistance to common antifungal drugs has become more widespread in recent years, more investigations should be performed to develop novel, inexpensive, non-toxic, and effective treatment approaches for controlling biofilm-associated infections. Scientists have used various natural compounds for inhibiting and degrading Candida biofilms. Curcumin, cinnamaldehyde, eugenol, carvacrol, thymol, terpinen-4-ol, linalool, geraniol, cineole, saponin, camphor, borneol, camphene, carnosol, citronellol, coumarin, epigallocatechin gallate, eucalyptol, limonene, menthol, piperine, saponin, α-terpineol, β-pinene, and citral are the major natural compounds that have been used widely for the inhibition and destruction of Candida biofilms. These compounds suppress not only fungal adhesion and biofilm formation but also destroy mature biofilm communities of Candida. Additionally, these natural compounds interact with various cellular processes of Candida, such as ABC-transported mediated drug transport, cell cycle progression, mitochondrial activity, and ergosterol, chitin, and glucan biosynthesis. The use of various drug delivery platforms can enhance the antibiofilm efficacy of natural compounds. Therefore, these drug delivery platforms should be considered as potential candidates for coating catheters and other medical material surfaces. A future goal will be to develop natural compounds as antibiofilm agents that can be used to treat infections by multi-drug-resistant Candida biofilms. Since exact interactions of natural compounds and biofilm structures have not been elucidated, further in vitro toxicology and animal experiments are required. In this article, we have discussed various aspects of natural compound usage for inhibition and destruction of Candida biofilms, along with the methods and procedures that have been used for improving the efficacy of these compounds.

Engineering for life in toxicity: Key to industrializing microbial synthesis of high energy density fuels

With the growing demand for air transportation combined with global concerns about environmental issues and the instability and lack of renewability of the oil market, microbial production of high energy density fuels for jets (bio-jet fuels) has received more attention in recent years. Bio-jet fuels can be derived from both isoprenoids and fatty acids, and, additionally, aromatic hydrocarbons derived from expanded shikimate pathways are also candidates for jet fuels. Compared to fatty acid derivatives, most of isoprenoids and aromatic hydrocarbons used for jet fuels have higher density energies. However, they are also highly toxic to host microbes. The cytotoxicity induced during the synthesis of isoprenoid or shikimate pathway-derived biofuels remains one of the major obstacles for industrial production even though synthetic and systems biology approaches have reconstructed and optimized metabolic pathways for production of these bio-jet fuels. Here, we review recent developments in the production of known and potential jet fuels by microorganisms, with a focus on alleviating cytotoxicity caused by the final products, intermediates, and metabolic pathways.

Tuning Geraniol Biosynthesis via a Novel Decane-Responsive Promoter in Candida glycerinogenes

Geraniol is a rose-scented monoterpene with significant commercial and industrial value in medicine, condiments, cosmetics, and bioenergy. Here, we first targeted geraniol as a reporter metabolite and explored the suitability and potential of Candida glycerinogenes as a heterologous host for monoterpenoid production. Subsequently, dual-pathway engineering was employed to improve the production of geraniol with a geraniol titer of 858.4 mg/L. We then applied a synthetic hybrid promoter approach to develop a decane-responsive hybrid promoter based on the native promoter P_GAP derived from C. glycerinogenes itself. The hybrid promoter was able to be induced by n-decane with 3.6 times higher transcriptional intensity than the natural promoter P_GAP. In particular, the hybrid promoter effectively reduces the conflict between cell growth and product formation in the production of geraniol. Ultimately, 1194.6 mg/L geraniol was obtained at the shake flask level. The strong and tunable decane-responsive hybrid promoter developed in this study provides an important tool for fine regulation of toxic terpenoid production in cells.

CRISPR-Mediated Base Editing: From Precise Point Mutation to Genome-Wide Engineering in Nonmodel Microbes

Nonmodel microbes with unique and diverse metabolisms have become rising stars in synthetic biology; however, the lack of efficient gene engineering techniques still hinders their development. Recently, the use of base editors has emerged as a versatile method for gene engineering in a wide range of organisms including nonmodel microbes. This method is a fusion of impaired CRISPR/Cas9 nuclease and base deaminase, enabling the precise point mutation at the target without inducing homologous recombination. This review updates the latest advancement of base editors in microbes, including the conclusion of all microbes that have been researched by base editors, the introduction of newly developed base editors, and their applications. We provide a list that comprehensively concludes specific applications of BEs in nonmodel microbes, which play important roles in industrial, agricultural, and clinical fields. We also present some microbes in which BEs have not been fully established, in the hope that they are explored further and so that other microbial species can achieve arbitrary base conversions. The current obstacles facing BEs and solutions are put forward. Lastly, the highly efficient BEs and other developed versions for genome-wide reprogramming of cells are discussed, showing great potential for future engineering of nonmodel microbes.

Current status and applications of genus Geobacillus in the production of industrially important products-a review

The genus Geobacillus is one of the most important genera which mainly comprises gram-positive thermophilic bacterial strains including obligate aerobes, denitrifiers and facultative anaerobes having capability of endospore formation as well. The genus Geobacillus is widely distributed in nature and mostly abundant in extreme locations such as cool soils, hot springs, hydrothermal vents, marine trenches, hay composts and dairy plants. Due to plasticity towards environmental adaptation, the Geobacillus sp. shows remarkable genome diversification and acquired many beneficial properties, which facilitates their exploitation for many biotechnological applications. Many thermophiles are of biotechnological importance and having considerable interest in commercial applications for the production of industrially important products. Recently, due to catabolic versatility especially in the degradation of hemicellulose and starch containing agricultural waste and rapid growth rates, these microorganisms show potential for the production of biofuels, thermostable enzymes and bioremediation. This review mainly summarizes the status of Geobacillus sp. including its notable properties, biotechnological studies and its potential application in the production of industrially important products.

Rapid Targeted Quantitation of Protein Overexpression with Direct Infusion Shotgun Proteome Analysis (DISPA-PRM)

While much effort has been placed on comprehensive quantitative proteome analysis, certain applications demand the measurement of only a few target proteins from complex systems. Traditional approaches to targeted proteomics rely on nanoliquid chromatography (nLC) and targeted mass spectrometry (MS) methods, e.g., parallel reaction monitoring (PRM). However, the time requirement for nLC can limit the throughput of targeted proteomics. To achieve rapid and high-throughput targeted methods, here we show that nLC separations can be eliminated and replaced with direct infusion shotgun proteome analysis (DISPA) using high-field asymmetric waveform ion mobility spectrometry (FAIMS) with PRM. We demonstrate the application of DISPA-PRM for rapid targeted quantification of bacterial enzymes utilized in the production of biofuels by monitoring temporal expression in 72 metabolically engineered bacterial cultures in less than 2.5 h, with a measured dynamic range >1200-fold. We conclude that DISPA-PRM presents a valuable innovative tool with results comparable to nLC-MS/MS, enabling fast and rapid detection of targeted proteins in complex mixtures.

Recent trends in upgrading the performance of yeast as electrode biocatalyst in microbial fuel cells

Microbial fuel cell (MFC) is an optimistic fuel cell technology that applies microorganism's biochemical catalytic activities in consuming organic substrate and produce electricity. In the past, several researchers have reported power generation from Saccharomyces cerevisiae, but nowadays, most of the studies are centred around bacterial biofilms (prokaryotes) as anode biocatalyst. Yeast (a eukaryote) has also been applied as a biocatalyst in MFCs as they are non-pathogenic, easy to handle and tolerant to various environmental conditions. Yeast strains such as Arxula adeninvorans, Candida melibiosica, Hansenula polymorpha, Hansenula anomala, Kluyveromyces marxianus and Saccharomyces cerevisiae have been utilized in MFCs. This review summarizes the application of yeast as an anode biocatalyst together with a discussion on the mechanism of electron transfer from yeast cells to the anode and highlights the techniques applied in improving the efficiency of yeast-based MFCs. The recent challenges and benefits of utilizing yeast in MFCs have been also encapsulated in this review.

n-Butanol production by Rhodopseudomonas palustris TIE-1

Anthropogenic carbon dioxide (CO₂) release in the atmosphere from fossil fuel combustion has inspired scientists to study CO₂ to biofuel conversion. Oxygenic phototrophs such as cyanobacteria have been used to produce biofuels using CO₂. However, oxygen generation during oxygenic photosynthesis adversely affects biofuel production efficiency. To produce n-butanol (biofuel) from CO₂, here we introduce an n-butanol biosynthesis pathway into an anoxygenic (non-oxygen evolving) photoautotroph, Rhodopseudomonas palustris TIE-1 (TIE-1). Using different carbon, nitrogen, and electron sources, we achieve n-butanol production in wild-type TIE-1 and mutants lacking electron-consuming (nitrogen-fixing) or acetyl-CoA-consuming (polyhydroxybutyrate and glycogen synthesis) pathways. The mutant lacking the nitrogen-fixing pathway produce the highest n-butanol. Coupled with novel hybrid bioelectrochemical platforms, this mutant produces n-butanol using CO₂, solar panel-generated electricity, and light with high electrical energy conversion efficiency. Overall, this approach showcases TIE-1 as an attractive microbial chassis for carbon-neutral n-butanol bioproduction using sustainable, renewable, and abundant resources.

Approaches in the photosynthetic production of sustainable fuels by cyanobacteria using tools of synthetic biology

Cyanobacteria, photosynthetic prokaryotic microorganisms having a simple genetic composition are the prospective photoautotrophic cell factories for the production of a wide range of biofuel molecules. The simple genetic composition of cyanobacteria allows effortless genetic manipulation which leads to increased research endeavors from the synthetic biology approach. Various unicellular model cyanobacterial strains like Synechocystis sp. PCC 6803 and Synechococcus elongatus PCC 7942 have been successfully engineered for biofuels generation. Improved development of synthetic biology tools, genetic modification methods and advancement in transformation techniques to construct a strain that can contain multiple foreign genes in a single operon have vastly expanded the functions that can be used for engineering photosynthetic cyanobacteria for the generation of various biofuel molecules. In this review, recent advancements and approaches in synthetic biology tools used for cyanobacterial genome editing have been discussed. Apart from this, cyanobacterial productions of various fuel molecules like isoprene, limonene, α-farnesene, squalene, alkanes, butanol, and fatty acids, which can be a substitute for petroleum and fossil fuels in the future, have been elaborated.

Plasticity engineering of plant monoterpene synthases and application for microbial production of monoterpenoids

Plant monoterpenoids with structural diversities have extensive applications in food, cosmetics, pharmaceuticals, and biofuels. Due to the strong dependence on the geographical locations and seasonal annual growth of plants, agricultural production for monoterpenoids is less effective. Chemical synthesis is also uneconomic because of its high cost and pollution. Recently, emerging synthetic biology enables engineered microbes to possess great potential for the production of plant monoterpenoids. Both acyclic and cyclic monoterpenoids have been synthesized from fermentative sugars through heterologously reconstructing monoterpenoid biosynthetic pathways in microbes. Acting as catalytic templates, plant monoterpene synthases (MTPSs) take elaborate control of the monoterpenoids production. Most plant MTPSs have broad substrate or product properties, and show functional plasticity. Thus, the substrate selectivity, product outcomes, or enzymatic activities can be achieved by the active site mutations and domain swapping of plant MTPSs. This makes plasticity engineering a promising way to engineer MTPSs for efficient production of natural and non-natural monoterpenoids in microbial cell factories. Here, this review summarizes the key advances in plasticity engineering of plant MTPSs, including the fundamental aspects of functional plasticity, the utilization of natural and non-natural substrates, and the outcomes from product isomers to complexity-divergent monoterpenoids. Furthermore, the applications of plasticity engineering for improving monoterpenoids production in microbes are addressed.

Enhancing Sesquiterpenoid Production from Methane via Synergy of the Methylerythritol Phosphate Pathway and a Short-Cut Route to 1-Deoxy-D-xylulose 5-Phosphate in Methanotrophic Bacteria

Sesquiterpenoids are one of the most diverse classes of isoprenoids which exhibit numerous potentials in industrial biotechnology. The methanotrophs-based methane bioconversion is a promising approach for sustainable production of chemicals and fuels from methane. With intrinsic high carbon flux though the ribulose monophosphate cycle in Methylotuvimicrobium alcaliphilum 20Z, we demonstrated here that employing a short-cut route from ribulose 5-phosphate to 1-deoxy-d-xylulose 5-phosphate (DXP) could enable a more efficient isoprenoid production via the methylerythritol 4-phosphate (MEP) pathway, using α-humulene as a model compound. An additional 2.8-fold increase in α-humulene production yield was achieved by the fusion of the nDXP enzyme and DXP reductase. Additionally, we utilized these engineering strategies for the production of another sesquiterpenoid, α-bisabolene. The synergy of the nDXP and MEP pathways improved the α-bisabolene titer up to 12.24 ± 0.43 mg/gDCW, twofold greater than that of the initial strain. This study expanded the suite of sesquiterpenoids that can be produced from methane and demonstrated the synergistic uses of the nDXP and MEP pathways for improving sesquiterpenoid production in methanotrophic bacteria.

Bioconversion of Renewable Plant Biomass. Second-Generation Biofuels: Raw Materials, Biomass Pretreatment, Enzymes, Processes, and Cost Analysis

The review discusses various aspects of renewable plant biomass conversion and production of the second-generation biofuels, including the types of plant biomass, its composition and reaction ability in the enzymatic hydrolysis, and various pretreatment methods for increasing the biomass reactivity. Conversion of plant biomass into sugars requires the use of a complex of enzymes, the composition of which should be adapted to the biomass type and the pretreatment method. The efficiency of enzymatic hydrolysis can be increased by optimizing the composition of the enzymatic complex and by increasing the catalytic activity and operational stability of its constituent enzymes. The availability of active enzyme producers also plays an important role. Examples of practical implementation and scaling of processes for the production of second-generation biofuels are presented together with the cost analysis of bioethanol production.

Progress in heterologous biosynthesis of forskolin

Forskolin, a class of labdane-type diterpenoid, has significant medicinal value in anticancer, antiasthmatic, antihypertensive, and heart-strengthening treatments. The main source of natural forskolin is its extraction from the cork tissue of the root of Coleus forskohlii. However, conventional modes of extraction pose several challenges. In recent years, the construction of microbial cell factories to produce medicinal natural products via synthetic biological methods has effectively solved the current problems and is a research hotspot in this field. This review summarizes the recent progress in the heterologous synthesis of forskolin via synthetic biological technology, analyzes the current challenges, and proposes corresponding strategies.

Unlocking Nature's Biosynthetic Power-Metabolic Engineering for the Fermentative Production of Chemicals

Fermentation as a production method for chemicals is especially attractive, as it is based on cheap renewable raw materials and often exhibits advantages in terms of costs and sustainability. The tremendous development of technology in bioscience has resulted in an exponentially increasing knowledge about biological systems and has become the main driver for innovations in the field of metabolic engineering. Progress in recombinant DNA technology, genomics, and computational methods open new, cheaper, and faster ways to metabolically engineer microorganisms. Existing biosynthetic pathways for natural products, such as vitamins, organic acids, amino acids, or secondary metabolites, can be discovered and optimized efficiently, thereby enabling competitive commercial production processes. Novel biosynthetic routes can now be designed by the rearrangement of nature's unlimited number of enzymes and metabolic pathways in microbial strains. This expands the range of chemicals accessible by biotechnology and has yielded the first commercial products, while new fermentation technologies targeting novel active ingredients, commodity chemicals, and CO₂ -fixation methods are on the horizon.

Metabolic engineering of Saccharomyces cerevisiae for the production of top value chemicals from biorefinery carbohydrates

The implementation of biorefineries for a cost-effective and sustainable production of energy and chemicals from renewable carbon sources plays a fundamental role in the transition to a circular economy. The US Department of Energy identified a group of key target compounds that can be produced from biorefinery carbohydrates. In 2010, this list was revised and included organic acids (lactic, succinic, levulinic and 3-hydroxypropionic acids), sugar alcohols (xylitol and sorbitol), furans and derivatives (hydroxymethylfurfural, furfural and furandicarboxylic acid), biohydrocarbons (isoprene), and glycerol and its derivatives. The use of substrates like lignocellulosic biomass that impose harsh culture conditions drives the quest for the selection of suitable robust microorganisms. The yeast Saccharomyces cerevisiae, widely utilized in industrial processes, has been extensively engineered to produce high-value chemicals. For its robustness, ease of handling, genetic toolbox and fitness in an industrial context, S. cerevisiae is an ideal platform for the founding of sustainable bioprocesses. Taking these into account, this review focuses on metabolic engineering strategies that have been applied to S. cerevisiae for converting renewable resources into the previously identified chemical targets. The heterogeneity of each chemical and its manufacturing process leads to inevitable differences between the development stages of each process. Currently, 8 of 11 of these top value chemicals have been already reported to be produced by recombinant S. cerevisiae. While some of them are still in an early proof-of-concept stage, others, like xylitol or lactic acid, are already being produced from lignocellulosic biomass. Furthermore, the constant advances in genome-editing tools, e.g. CRISPR/Cas9, coupled with the application of innovative process concepts such as consolidated bioprocessing, will contribute for the establishment of S. cerevisiae-based biorefineries.

A divergent approach for the synthesis of (hydroxymethyl)furfural (HMF) from spent aromatic biomass-derived (chloromethyl)furfural (CMF) as a renewable feedstock

Extraction of commercial essential oil from several aromatic species belonging to the genus Cymbopogon results in the accumulation of huge spent aromatic waste which does not have high value application; instead, the majority is burned or disposed of to vacate fields. Open burning of spent aromatic biomass causes deterioration of the surrounding air quality. Therefore, a new protocol has been developed for chemical processing of spent biomass to obtain 5-(chloromethyl)furfural (CMF) with high selectivity (∼80%) and yields (∼26 wt% or ∼76 mol% with respect to pre-treated biomass) via refluxing in aqueous HCl in the presence of NaCl as a cheap catalyst. No black tar formation and gasification were observed in the processing of the spent aromatic biomass. Spent aromatic waste-derived CMF was further converted to 5-(hydroxymethyl)furfural (HMF) in good yields by a novel one pot method using iodosylbenzene (PhIO) as a reagent under mild reaction conditions.

Recent advances in the biosynthesis of isoprenoids in engineered Saccharomyces cerevisiae

Isoprenoids, as the largest group of chemicals in the domains of life, constitute more than 50,000 members. These compounds consist of different numbers of isoprene units (C₅H₈), by which they are typically classified into hemiterpenoids (C5), monoterpenoids (C10), sesquiterpenoids (C15), diterpenoids (C20), triterpenoids (C30), and tetraterpenoids (C40). In recent years, isoprenoids have been employed as food additives, in the pharmaceutical industry, as advanced biofuels, and so on. To realize the sufficient and efficient production of valuable isoprenoids on an industrial scale, fermentation using engineered microorganisms is a promising strategy compared to traditional plant extraction and chemical synthesis. Due to the advantages of mature genetic manipulation, robustness and applicability to industrial bioprocesses, Saccharomyces cerevisiae has become an attractive microbial host for biochemical production, including that of various isoprenoids. In this review, we summarized the advances in the biosynthesis of isoprenoids in engineered S. cerevisiae over several decades, including synthetic pathway engineering, microbial host engineering, and central carbon pathway engineering. Furthermore, the challenges and corresponding strategies towards improving isoprenoid production in engineered S. cerevisiae were also summarized. Finally, suggestions and directions for isoprenoid production in engineered S. cerevisiae in the future are discussed.

Efficient production of the anti-aging drug Cycloastragenol: insight from two Glycosidases by enzyme mining

The telomerase activator cycloastragenol (CA) is regarded as a potential anti-aging drug with promising applications in the food and medical industry. However, one remaining challenge is the low efficiency of CA production. Herein, we developed an enzyme-based approach by applying two enzymes (β-xylosidase: Xyl-T; β-glucosidase: Bgcm) for efficient CA production. Both key glycosidases, mined by activity tracking or homology sequence screening, were successfully over-expressed and showed prominent enzymatic activity profiles, including widely pH stability (Xyl-T: pH 3.0-8.0; Bgcm: pH 4.0-10.0), high catalytic efficiency (k_cat/K_m: 0.096 mM^-1s^-1 (Xyl-T) and 3.08 mM^-1s^-1 (Bgcm)), and mesophilic optimum catalytic temperature (50 °C). Besides, the putative catalytic residues (Xyl-T: Asp311/Glu 521; Bgcm: Asp311/Glu 521) and the potential substrate-binding mechanism of Xyl-T and Bgcm were predicted by comprehensive computational analysis, providing valuable insight into the hydrolysis of substrates at the molecular level. Notably, a rationally designed two-step reaction process was introduced to improve the CA yield and increased up to 96.5% in the gram-scale production, providing a potential alternative for the industrial CA bio-production. In essence, the explored enzymes, the developed enzyme-based approach, and the obtained knowledge from catalytic mechanisms empower researchers to further engineer the CA production and might be applied for other chemicals synthesis. KEY POINTS: • A β-xylosidase and a β-glucosidase were mined to hydrolyze ASI into CA. • The two recombinant glycosidases showed prominent catalytic profiles. • Two-step enzymatic catalysis for CA production from ASI was developed. Graphical abstract.

Undecane production by cold-adapted bacteria from Antarctica

In the last decades, efforts to reduce the use of fossil fuels have increased the search for alternative sustainable sources of renewable energy. In this scenario, hydrocarbons derived from fatty acids are among the compounds that have been drawing attention. The intracellular production of hydrocarbons by bacteria derived from cold environments such as the Antarctic continent is currently poorly investigated, as extremophilic microorganisms provide a great range of metabolic capabilities and may represent a key tool in the production of biofuels. The aim of this study was to explore the ability of bacterial cells derived from extreme environments to produce hydrocarbons with potential for further use as biofuels. Seven bacteria isolated from Antarctic samples were evaluated for hydrocarbon production using GC-MS approaches. Two isolates, identified as Arthrobacter livingstonensis 593 and Pseudoalteromonas arctica 628, were able to produce the hydrocarbon undecane (CH3-(CH2)₉-CH3) in concentrations of 1.39 mg L^-1 and 1.81 mg L^-1, respectively. Results from the present work encourage further research focusing on the optimization of hydrocarbon production by the isolates identified as producers, which may be used in further aircraft biofuel production. This is the first report on the production of the undecane compound by bacteria isolated from waterlogged soil and sponge from Antarctica.

Engineering Saccharomyces cerevisiae for production of the valuable monoterpene d-limonene during Chinese Baijiu fermentation

d-Limonene, a cyclic monoterpene, possesses citrus-like olfactory property and multi-physiological functions. In this study, the d-limonene synthase (t LS) from Citrus limon was codon-optimized and heterologously expressed in Saccharomyces cerevisiae. The metabolic flux of canonical pathway based on overexpressing endogenous geranyl diphosphate synthase gene (ERG20) and its variant ERG20F96W−N127W was strengthened for improvement d-limonene production in Chinese Baijiu. To further elevate production, we established an orthogonal pathway by introducing neryl diphosphate synthase 1 (t NDPS1) from Solanum lycopersicum. The results showed that expressing ERG20 and ERG20F96W−N127W could enhance d-limonene synthesis, while expressing heterologous NPP synthase gene significantly increase d-limonene formation. Furthermore, we constructed a t LS–t NDPS1 fusion protein, and the best strain yielded 9.8 mg/L d-limonene after optimizing the amino acid linker and fusion order, a 40% improvement over the free enzymes during Chinese Baijiu fermentation. Finally, under the optimized fermentation conditions, a maximum d-limonene content of 23.7 mg/L in strain AY12α-L9 was achieved, which was the highest reported production in Chinese Baijiu. In addition, we also investigated that the effect of d-limonene concentration on yeast growth and fermentation. This study provided a meaningful insight into the platform for other valuable monoterpenes biosynthesis in Chinese Baijiu fermentation.

Photosynthetic Conversion of Carbon Dioxide to Oleochemicals by Cyanobacteria: Recent Advances and Future Perspectives

Sustainable production of biofuels and biochemicals has been broadly accepted as a solution to lower carbon dioxide emissions. Besides being used as lubricants or detergents, oleochemicals are also attractive biofuels as they are compatible with existing transport infrastructures. Cyanobacteria are autotrophic prokaryotes possessing photosynthetic abilities with mature genetic manipulation systems. Through the introduction of exogenous or the modification of intrinsic metabolic pathways, cyanobacteria have been engineered to produce various bio-chemicals and biofuels over the past decade. In this review, we specifically summarize recent progress on photosynthetic production of fatty acids, fatty alcohols, fatty alk(a/e)nes, and fatty acid esters by genetically engineered cyanobacteria. We also summarize recent reports on fatty acid and lipid metabolisms of cyanobacteria and provide perspectives for economic cyanobacterial oleochemical production in the future.

Engineering transport systems for microbial production

The rapid development in the field of metabolic engineering has enabled complex modifications of metabolic pathways to generate a diverse product portfolio. Manipulating substrate uptake and product export is an important research area in metabolic engineering. Optimization of transport systems has the potential to enhance microbial production of renewable fuels and chemicals. This chapter comprehensively reviews the transport systems critical for microbial production as well as current genetic engineering strategies to improve transport functions and thus production metrics. In addition, this chapter highlights recent advancements in engineering microbial efflux systems to enhance cellular tolerance to industrially relevant chemical stress. Lastly, future directions to address current technological gaps are discussed.

Harnessing Yeast Peroxisomes and Cytosol Acetyl-CoA for Sesquiterpene α-Humulene Production

Metabolic engineering of Saccharomyces cerevisiae focusing on the cytoplasm for sustainable terpenoid production is commonly practiced. However, engineering organelles for terpenoid production is rarely reported. Herein, peroxisomes, together with the cytoplasm, were engineered to boost sesquiterpene α-humulene synthesis in S. cerevisiae. The farnesyl diphosphate synthetic pathway and α-humulene synthase were successfully expressed inside yeast peroxisomes to enable high-level α-humulene production with glucose as the sole carbon source. With the combination of peroxisomal and cytoplasmic engineering, α-humulene production was increased by 2.5-fold compared to that in cytoplasm-engineered recombinant strains. Finally, the α-humulene titer of 1726.78 mg/L was achieved by fed-batch fermentation in a 5 L bioreactor. The strategy presented here offers an efficient method for terpenoid production in S. cerevisiae.

Engineering endogenous ABC transporter with improving ATP supply and membrane flexibility enhances the secretion of β-carotene in Saccharomyces cerevisiae

BACKGROUND

Product toxicity is one of the bottlenecks for microbial production of biofuels, and transporter-mediated biofuel secretion offers a promising strategy to solve this problem. As a robust microbial host for industrial-scale production of biofuels, Saccharomyces cerevisiae contains a powerful transport system to export a wide range of toxic compounds to sustain survival. The aim of this study is to improve the secretion and production of the hydrophobic product (β-carotene) by harnessing endogenous ABC transporters combined with physiological engineering in S. cerevisiae.

RESULTS

Substrate inducibility is a prominent characteristic of most endogenous transporters. Through comparative proteomic analysis and transcriptional confirmation, we identified five potential ABC transporters (Pdr5p, Pdr10p, Snq2p, Yor1p, and Yol075cp) for β-carotene efflux. The accumulation of β-carotene also affects cell physiology in various aspects, including energy metabolism, mitochondrial translation, lipid metabolism, ergosterol biosynthetic process, and cell wall synthesis. Here, we adopted an inducible GAL promoter to overexpress candidate transporters and enhanced the secretion and intracellular production of β-carotene, in which Snq2p showed the best performance (a 4.04-fold and a 1.33-fold increase compared with its parental strain YBX-01, respectively). To further promote efflux capacity, two strategies of increasing ATP supply and improving membrane fluidity were following adopted. A 5.80-fold increase of β-carotene secretion and a 1.71-fold increase of the intracellular β-carotene production were consequently achieved in the engineered strain YBX-20 compared with the parental strain YBX-01.

CONCLUSIONS

Overall, our results showcase that engineering endogenous plasma membrane ABC transporters is a promising approach for hydrophobic product efflux in S. cerevisiae. We also highlight the importance of improving cell physiology to enhance the efficiency of ABC transporters, especially energy status and cell membrane properties.

High-throughput screen for sorting cells capable of producing the biofuel feedstock botryococcene

Botryococcene is a branched triterpene produced by the algae Botryococcus braunii. Hydrocracking botryococcene yields a variety of combustible fuels such as gasoline and jet fuel. Engineering host systems and proteins involved in the biosynthesis of botryococcene to optimize production is of interest given these applications. The current study investigates the use of a diaryltetrazole based screen that undergoes a photoclick reaction with terminal alkenes, such as the branched terminal alkene present on botryococcene, to yield a fluorescent product. Host E. coli systems were established to produce botryococcene, squalene, and no triterpene to serve as a control. Cells were incubated with tetrazole and briefly irradiated with UV light to initiate the photoclick reaction. It was found that the botryococcene producing cells yielded observable fluorescence while the squalene and control cells had negligible fluorescence turn-on activity. Fluorescence-activated cell sorting (FACS) was subsequently used to identify and sort botryococcene producing E. coli from a mixture of control and squalene producing cells.

Production of xylose, levulinic acid, and lignin from spent aromatic biomass with a recyclable Brønsted acid synthesized from d-limonene as renewable feedstock from citrus waste

This work aimed to develop a green protocol for chemical processing of spent aromatic biomass to obtain xylose, levulinic acid, and lignin in good yields via treatment with p-cymene-2-sulphonic acid (p-CSA), a Brønsted acid synthesised from d-limonene as a renewable feedstock from citrus waste. Chemical processing of palmarosa biomass with p-CSA under heating in an autoclave resulted in hydrolysate containing xylose (~16% yield). Further processing of pre-treated biomass with p-CSA in presence of aq. HCl under refluxing caused a selective degradation of cellulose to levulinic acid (~22% yield with respect to biomass). The residual biomass was used to afford lignin in good yields.

Consolidated bioprocessing performance of bacterial consortium EMSD5 on hemicellulose for isopropanol production

Consolidated bioprocessing (CBP) of lignocellulose by bacterial consortium for isopropanol production is considered as the most promising strategy. However, low utilization of xylan caused by the complex sidechain structure remains inhibit the conversion of full-biomass. In this study, isopropanol production from different lignocelluloses by the consortium EMSD5 through CBP was performed. A total of 7.00 g/L of isopropanol was obtained from corncob by optimizing fermentation conditions. Isopropanol production by EMSD5 was mainly based on utilizing xylan in corncob and isopropanol titer was increased by 47.71% and reached up to 8.39 g/L using arabinoxylan compared with linear xylan. The analysis of community structures and the isolation of key strain confirmed the enrichment of the isopropanol producer, Clostridium beijierinckii, in the bacterial community when it was incubated with corn glucuronoarabinoxylan and the cooperation between C. beijerinckii and lignocellulose degraders. The unique features of EMSD5 could lead to large-scale isopropanol production using lignocellulose.

Esterification of geraniol as a strategy for increasing product titre and specificity in engineered Escherichia coli

Background

Geraniol, an acyclic monoterpene alcohol, is found as a primary constituent in the essential oils of plants such as geranium, lemongrass and rose. The floral-like scent of geraniol has made it a popular constituent of flavour and fragrance products. Over recent decades biotechnology has made significant progress towards the development of industrial platforms for the production of commercially valuable monoterpenoids, such as geraniol, through expression of recombinant terpene biosynthetic pathways in microbial hosts. Titres, however, have been hindered due to the inherent toxicity of these compounds—which are often utilised for anti-microbial and anti-fungal functions in their host plant.

Results

In this study we modified an Escherichia coli strain, engineered to express a heterologous mevalonate pathway, by replacement of the terpene synthase with a geraniol synthase from Ocimum basilicum for the production of geraniol, and co-expressed an alcohol acyltransferase (AAT) from Rosa hybrida for the specific acetylation of geraniol. The low water solubility of geranyl acetate facilitated its partition into the organic phase of a two-phase system, relieving the cellular toxicity attributed to the build-up of geraniol in the aqueous phase. In a partially optimised system this strain produced 4.8 g/L geranyl acetate (based on the aqueous volume) which, on a molar equivalent basis, represents the highest monoterpene titre achieved from microbial culture to date. It was also found that esterification of geraniol prevented bioconversion into other monoterpenoids, leading to a significant improvement in product specificity, with geranyl acetate being the sole product observed.

Conclusion

In this study we have shown that it is possible to both overcome the toxicity limit impeding the production of the monoterpene alcohol geraniol and mitigate product loss in culture through endogenous metabolism by using an in vivo esterification strategy. This strategy has resulted in the highest geraniol (equivalent) titres achieved from a microbial host, and presents esterification as a viable approach to increasing the titres obtained in microbial monoterpenoid production.

Electronic supplementary material

The online version of this article (10.1186/s12934-019-1130-0) contains supplementary material, which is available to authorized users.