Enhanced CHO Clone Screening: Application of Targeted Locus Amplification and Next‐Generation Sequencing Technologies for Cell Line Development

Evaluation of two transposases for improving expression of recombinant proteins in Chinese hamster ovary cell stable pools by co-transfection and supertransfection approaches

Transposons are genetic elements capable of cutting and pasting genes of interest via the action of a transposase and offer many advantages over random or targeted integration of DNA in the creation of Chinese hamster ovary (CHO) cell lines for recombinant protein expression. Unique transposases have different recognition sites, allowing multiple transposases to be co-transfected together. They also allow for supertransfection (transfection on a previously transfected pool or cell line) with a second transposase to integrate additional copies of the same gene or an additional gene without disruption of the previously integrated DNA which to our knowledge has not been previously described in literature. Two fluorescent proteins, EGFP and tagRFP657, were either co-transfected or supertransfected into CHO cells using two unique transposases and showed high expression efficiency with similar expression levels (measured as mean fluorescence intensity), regardless of whether the genes were co-transfected or supertransfected onto an existing stable pool. Additionally, dual selection of the genes, both in the absence of L-glutamine and the presence of puromycin, led to higher expression levels than single selection alone. These results demonstrate that supertransfection using unique transposases could be a useful strategy for increasing titers of existing cell lines or for overexpressing helper (non-therapeutic) genes to improve expression and/or product quality of existing pools and cell lines, potentially saving significant time and resources.

Novel and effective screening system for recombinant protein production in CHO cells

At present, biopharmaceuticals have received extensive attention from the society, among which recombinant proteins have a good growth trend and a large market share. Chinese hamster ovary (CHO) cells are the preferred mammalian system to produce glycosylated recombinant protein drugs. A highly efficient and stable cell screening method needs to be developed to obtain more and useful recombinant proteins. Limited dilution method, cell sorting, and semi-solid medium screening are currently the commonly used cell cloning methods. These methods are time-consuming and labor-intensive, and they have the disadvantage of low clone survival rate. Here, a method based on semi-solid medium was developed to screen out high-yielding and stable cell line within 3 weeks to improve the screening efficiency. The semi-solid medium was combined with an expression vector containing red fluorescent protein (RFP) for early cell line development. In accordance with the fluorescence intensity of RFP, the expression of upstream target gene could be indicated, and the fluorescence intensity was in direct proportion to the expression of upstream target gene. In conclusion, semi-solid medium combined with bicistronic expression vector provides an efficient method for screening stable and highly expressed cell lines.

Droplet digital PCR: A comprehensive tool for genetic analysis and prediction of bispecific antibody assembly during cell line development

Molecular biological methods have emerged as inevitable tools to accompany the process of cell line development for the generation of stable and highly productive manufacturing cell lines in the biopharmaceutical industry. PCR-based methods are especially useful for screening and characterization of cell lines due to their low cost, scalability, precision and propensity for multidimensional read-outs. In this study, the diverse applications of droplet digital PCR (ddPCR) as a molecular biological tool for cell line development are demonstrated. Specifically, it is shown that ddPCR can be used to enable precise, sensitive and reproducible absolute quantification of genomically integrated transgene copies during cell line development and cell bank characterization. Additionally, an amplitude multiplexing approach is applied to simultaneously run multiple assays on different genetic targets in a single reaction and advance clonal screening by measuring gene expression profiles to predict the assembly and homogeneity of difficult-to-express (DTE) proteins. The implementation of ddPCR-based assays during cell line development allows for early screening at a transcriptional level, particularly for complex, multidomain proteins, where balanced polypeptide chain ratios are of primary importance. Moreover, it is demonstrated that ddPCR-based genomic characterization improves the robustness, efficiency and comparability of absolute transgene copy number quantification, an essential genetic parameter that must be demonstrated to regulatory authorities during clinical trial and market authorization application submissions to support genetic stability and consistency of the selected cell substrate.

Genomic features of recombinant CHO clones arising from transposon-based and randomized integration

The use of transposase in cell line development (CLD) programs has experienced increased popularity over the past decade. However, few studies have described the mechanism of action and the genomic and phenotypic characteristics of clones derived from transposase. Additionally, how these traits impact long-term bioproduction is unknown. Here, we use chromosome painting, deep sequencing, and ddPCR to characterize the unique fingerprints associated with transposase-derived clones. Transposase reduces the cellular pool of transient vector as early as three days post transfection following transfection and expedites stable pool establishment by up to two weeks. Furthermore, recombinant DNA expression is significantly improved up to ∼3 fold along with a greater balance of antibody heavy and light chain transcripts, resulting in higher titers in transposase generated pools. Transposase derived pools contained an often innumerable number of integration sites, representing a vast increase in integration site diversity over randomly generated pools, which were bottlenecked at 1-3 integration sites per pool. These transposase mediated integrations typically occurred in clean singlets, free of genomic scars such as deletions, inversions, and other modifications associated with legacy transfection methods which exhibited higher copy numbers per integration site. Relative declines in gene expression occur with copy number increase in the randomly generated, but not the transposase derived clones. Furthermore, transposase-derived clones were more likely to exhibit enhanced a long term stability profile, including product quality attributes such as mannose-5. This improved stability may result from circumventing mechanisms associated with the silencing of tandem repeats. Thus, transposase-mediated approaches can provide multifaceted molecular and phenotypic advantages in cell line development when compared to legacy random-integration methods.

Deciphering integration loci of CHO manufacturing cell lines using long read nanopore sequencing

Despite advances in genetic characterization of Chinese hamster ovary (CHO) cell lines regarding identification of integration sites using next generation sequencing, e.g. targeted locus amplification sequencing (TLA-seq), the concatemer structure of the integrated vectors remains elusive. Here, the entire integration locus of two CHO manufacturing cell lines was reconstructed combining CRISPR/Cas9 target enrichment, nanopore sequencing and the Canu de novo assembly pipeline. An IgG producing CHO cell line integrated 3 vector copies, which were near full-length and contained all relevant vector elements such as transgenes and their promoters on each of the vector copies. In contrast, a second CHO cell line producing a bivalent bispecific antibody integrated 7 highly fragmented vector copies in different orientations leading to head-to-head and tail-to-tail fusions. The size of the vector fragments ranged from 3.0 to 11.4 kbp each carrying 1-3 transgenes. The breakpoints of the genome-vector and vector-vector junctions were validated using Sanger sequencing and Southern blotting. A comparison to TLA-seq data confirmed the genomic breakpoints, but most of the breakpoints of the vector-vector fusions were missed by TLA-seq. For the first time, the complete transgene locus of CHO manufacturing cell lines could be deciphered. Strikingly, the application of the nanopore long-read sequencing technology led to novel insights into the complexity of genomic transgene integrations of CHO manufacturing cell lines generated via random integration.

A genetic off-target event in a site-specific integration cell line expressing monoclonal antibody has no impact on commercial suitability

Site-specific integration (SSI) cell line systems are gaining popularity for biotherapeutic development and production. Despite the proven advantages for these expression hosts, the SSI system is still susceptible to rare off-target events and potential vector rearrangements. Here we describe the development process of an SSI cell line for production of an IgG1 monoclonal antibody (mAb-086). During cell line generational studies to assess suitability of clone C10 for commercial purposes, restriction fragment lengths of genomic DNA harboring the light chain (LC) were not in agreement with the predicted size. We first confirmed that the SSI landing-pad achieved occupancy of the desired expression plasmid. Additional investigation revealed that random integration had occurred, resulting in the acquisition of a partial copy of the LC and a full-length copy of the heavy chain (HC) at a different locus in the host genome. This off-target event had no impact on the genotypic consistency and phenotypic stability of the cell line, the production process, or the drug substance product quality. Given the genetic, phenotypic, and process consistency of the cell line, clone C10 was deemed suitable as a manufacturing cell line.

Monoclonal Antibody Sequence Variants Disguised as Fragments: Identification, Characterization, and Their Removal by Purification Process Optimization

During early stage development of a therapeutic IgG1 monoclonal antibody, high levels of low molecular weight (LMW) peaks were observed by high performance size-exclusion chromatography and capillary electrophoresis. Further characterization of the LMW peak enriched HPSEC fractions using reversed phase liquid chromatography coupled to mass spectrometry showed these LMW species were 47 kDa and 50 kDa in size. However, the measured masses could not be matched to any fragments resulting from peptide bond hydrolysis. To identify these unknown LMW species, molecular characterization methods were employed, including high-throughput sequencing of RNA. Transcriptomic analysis revealed the LMW species were generated by mis-splicing events in the heavy chain transcript, which produced truncated heavy chain products that assembled with the light chain to mimic the appearance of fragments identified by routine purity assays. In an effort to improve product quality, an optimized purification process was developed. Characterization of the process intermediates confirmed removal of both LMW species by the optimized process. Our study demonstrates that deep-dive analytical characterization of biotherapeutics is critical to ensure product quality and inform process development. Transcriptomic analysis tools can help identify the cause of unknown species, and plays a key role in product and process characterization.

Targeted Locus Amplification as Marker Screening Approach to Detect Immunoglobulin (IG) Translocations in B-Cell Non-Hodgkin Lymphomas

Although MRD monitoring by the classic polymerase chain reaction (PCR) approach is a powerful outcome predictor, about 20% of mantle cell lymphoma (MCL) and 50% of follicular lymphoma (FL) patients still lack a molecular marker and are thus resulting not eligible for MRD monitoring. Targeted locus amplification (TLA), a new NGS technology, has been revealed as a feasible marker screening approach able to identify uncommon B-cell leukemia/lymphoma 1 (BCL1) and B-cell leukemia/lymphoma 2 (BCL2) rearrangements in MCL and FL cases defined as having "no marker" by the classic PCR approach.

Structural analysis of random transgene integration in CHO manufacturing cell lines by targeted sequencing

Genetically modified CHO cell lines are traditionally used for the production of biopharmaceuticals. However, an in-depth molecular understanding of the mechanism and exact position of transgene integration into the genome of pharmaceutical manufacturing cell lines is still scarce. Next Generation Sequencing (NGS) holds great promise for strongly facilitating the understanding of CHO cell factories, as it has matured to a powerful and affordable technology for cellular genotype analysis. Targeted Locus Amplification (TLA) combined with NGS allows for robust detection of genomic positions of transgene integration and structural genomic changes occurring upon stable integration of expression vectors. TLA was applied to generate comparative genomic fingerprints of several CHO production cell lines expressing different monoclonal antibodies. Moreover, high producers resulting from an additional round of transfection of an existing cell line (supertransfection) were analyzed to investigate the integrity and the number of integration sites. Our analyses enabled detailed genetic characterization of the integration regions with respect to the number of integrates and structural changes of the host cell's genome. Single integration sites per clone with concatenated transgene copies could be detected and were in some cases found to be associated with genomic rearrangements, deletions or translocations. Supertransfection resulted in an increase in titer associated with an additional integration site per clone. Based on the TLA fingerprints, CHO cell lines originating from the same mother clone could clearly be distinguished. Interestingly, two CHO cell lines originating from the same mother clone were shown to differ genetically and phenotypically despite of their identical TLA fingerprints. Taken together, TLA provides an accurate genetic characterization with respect to transgene integration sites compared to conventional methods and represents a valuable tool for a comprehensive evaluation of CHO production clones early in cell line development. This article is protected by copyright. All rights reserved.

Benchmarking and optimization of a high-throughput sequencing based method for transgene sequence variant analysis in biotherapeutic cell line development

In recent years, High-Throughput Sequencing (HTS) based methods to detect mutations in biotherapeutic transgene products have become a key quality step deployed during the development of manufacturing cell line clones. Previously we reported on a higher throughput, rapid mutation detection method based on amplicon sequencing (targeting transgene RNA) and detailed its implementation to facilitate cell line clone selection. By gaining experience with our assay in a diverse set of cell line development programs, we improved the computational analysis as well as experimental protocols. Here we report on these improvements as well as on a comprehensive benchmarking of our assay. We evaluated assay performance by mixing amplicon samples of a verified mutated antibody clone with a non-mutated antibody clone to generate spike-in mutations from ∼60% down to ∼0.3% frequencies. We subsequently tested the effect of 16 different sample and HTS library preparation protocols on the assay's ability to quantify mutations and on the occurrence of false-positive background error mutations (artifacts). Our evaluation confirmed assay robustness, established a high confidence limit of detection of ∼0.6%, and identified protocols that reduce error levels thereby significantly reducing a source of false positives that bottlenecked the identification of low-level true mutations.

Multiplexed clonality verification of cell lines for protein biologic production

During the development of cell lines for therapeutic protein production, a vector harboring a product transgene is integrated into the genome. To ensure production stability and consistent product quality, single-cell cloning is then performed. Since cells derived from the same parental clone have the same transgene integration locus, the identity of the integration site can also be used to verify the clonality of a production cell line. In this study, we present a high-throughput pipeline for clonality verification through integration site analysis. Sequence capture of genomic fragments that contain both vector and host cell genome sequences was used followed by next-generation sequencing to sequence the relevant vector-genome junctions. A Python algorithm was then developed for integration site identification and validated using a cell line with known integration sites. Using this system, we identified the integration sites of the host vector for 31 clonal cell lines from five independent vector integration events while using one set of probes against common features of the host vector for transgene integration. Cell lines from the same lineage had common integration sites, and they were distinct from unrelated cell lines. The integration sites obtained for each clone as part of the analysis may also be used for clone selection, as the sites can have a profound effect on the transgene’s transcript level and the stability of the resulting cell line. This method thus provides a rapid system for integration site identification and clonality verification.

Identification and characterization of an IgG sequence variant with an 11 kDa heavy chain C-terminal extension using a combination of mass spectrometry and high-throughput sequencing analysis

Protein primary structure is a potential critical quality attribute for biotherapeutics. Identifying and characterizing any sequence variants present is essential for product development. A sequence variant ~11 kDa larger than the expected IgG mass was observed by size-exclusion chromatography and two-dimensional liquid chromatography coupled with online mass spectrometry. Further characterization indicated that the 11 kDa was added to the heavy chain (HC) Fc domain. Despite the relatively large mass addition, only one unknown peptide was detected by peptide mapping. To decipher the sequence, the transcriptome of the manufacturing cell line was characterized by Illumina RNA-seq. Transcriptome reconstruction detected an aberrant fusion transcript, where the light chain (LC) constant domain sequence was fused to the 3ʹ end of the HC transcript. Translation of this fusion transcript generated an extended peptide sequence at the HC C-terminus corresponding to the observed 11 kDa mass addition. Nanopore-based genome sequencing showed multiple copies of the plasmid had integrated in tandem with one copy missing the 5ʹ end of the plasmid, deleting the LC variable domain. The fusion transcript was due to read-through of the HC terminator sequence into the adjacent partial LC gene and an unexpected splicing event between a cryptic splice-donor site at the 3ʹ end of the HC and the splice acceptor site at the 5ʹ end of the LC constant domain. Our study demonstrates that combining protein physicochemical characterization with genomic and transcriptomic analysis of the manufacturing cell line greatly improves the identification of sequence variants and understanding of the underlying molecular mechanisms.