Hydration of polysaccharide hyaluronan observed by IR spectrometry. I. Preliminary experiments and band assignments

Novel PVA-Hyaluronan-Siloxane Hybrid Nanofiber Mats for Bone Tissue Engineering

Hyaluronan (HA) is a natural biodegradable biopolymer; its biological functions include cell adhesion, cell proliferation, and differentiation as well as decreasing inflammation, angiogenesis, and regeneration of damaged tissue. This makes it a suitable candidate for fabricating nanomaterials with potential use in tissue engineering. However, HA nanofiber production is restricted due to the high viscosity, low evaporation rate, and high surface tension of HA solutions. Here, hybrids in the form of continuous and randomly aligned polyvinyl alcohol (PVA)-(HA)-siloxane nanofibers were obtained using an electrospinning process. PVA-HA fibers were crosslinked by a 3D siloxane organic-inorganic matrix via sol-gel that restricts natural hydrophilicity and stiffens the structure. The hybrid nanofiber mats were characterized by FT-IR, micro-Raman spectroscopy, SEM, and biological properties. The PVA/HA ratio influenced the morphology of the hybrid nanofibers. Nanofibers with high PVA content (10PVA-8 and 10PVA-10) form mats with few beaded nanofibers, while those with high HA content (5PVA-8 and 5PVA-10) exhibit mats with mound patterns formed by "ribbon-like" nanofibers. The hybrid nanofibers were used as mats to support osteoblast growth, and they showed outstanding biological properties supporting cell adhesion, cell proliferation, and cell differentiation. Importantly, the 5PVA-8 mats show 3D spherical osteoblast morphology; this suggests the formation of tissue growth. These novel HA-based nanomaterials represent a relevant advance in designing nanofibers with unique properties for potential tissue regeneration.

Hyaluronic Acid Unveiled: Exploring the Nanomechanics and Water Retention Properties at the Single-Molecule Level

Hyaluronic acid (HA), a vital glycosaminoglycan in living organisms, possesses remarkable mechanical and viscoelastic properties that have garnered significant attention in therapeutic, biomedical, and cosmetic applications. However, a comprehensive picture of the physicochemical and biocharacterization of HA at the single-molecule level remains elusive. In this work, atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) and molecular dynamics (MD) simulation were used to investigate the nanomechanics and water retention properties of HA at the single-molecule level. The present study aims to unravel the intricate details of the influence of molecular structure on HA behavior and shed light on its unique attributes. According to the force measurements, the energy used to stretch a HA chain in water is 8.45 kJ/mol, significantly surpassing that of Curdlan (3.45 kJ/mol) and chitin (2.23 kJ/mol), both of which possess molecular structures partially similar to that of HA. Intriguingly, the strength of the intrachain interaction of HA (5.54 kJ/mol) was considerably weaker compared to Curdlan (11.06 kJ/mol) and chitin (or cellulose, 10.76 kJ/mol). This result indicates that HA exhibits a preference for interacting with water rather than with itself, thereby showing enhanced water affinity. Moreover, the force measurements demonstrated that changing the glycosidic bond from β-(1-3) (Curdlan) or β-(1-4) (chitin or cellulose) to β-(1-3) + β-(1-4) (HA) resulted in polysaccharides displaying improved water affinity and more extended conformation. These conclusions were further verified by molecular dynamics (MD) simulations. Overall, our work sheds new light on the nanomechanics and water retention properties of HA at the single-molecule level, offering valuable insights for future research in this field.

Phase Inversion Gelation Process and Additive Effects on Hydrogel Film Properties of Cotton Cellulose

During the preparation of cotton cellulose hydrogels using the phase inversion gelation method of N,N-dimethylacetamide/LiCl solution under ethanol vapor, acetone (AC), methyl ethyl ketone (MEK), or diethyl ketone (DEK) were added as additives, and their gelation state and the properties of the resulting hydrogels were evaluated. Adding the ketones to the cellulose solution caused an increase in the gelation time, but the solution viscosity decreased, indicating that the cellulose tended to aggregate in the solution. Among the hydrogels prepared by adding ketones, the water content was as high as 2050%, especially for AC and MEK. In these hydrogels, cellulose formed an agglomerated fibrous network of a few micron widths, forming a tuft-like entrapment space of about 10 to 100 μm size. The structure surrounded water and held it in the hydrogels. The FTIR results showed that the water, which formed hydrogen bonds, was retained within the hydrogel network. This structural configuration was determined to be conducive to maintaining the gel state against external deformation forces, especially in the case of the addition of MEK.

Injection-on-Skin Granular Adhesive for Interactive Human-Machine Interface

Realization of interactive human-machine interfaces (iHMI) is improved with development of soft tissue-like strain sensors beyond hard robotic exosuits, potentially allowing cognitive behavior therapy and physical rehabilitation for patients with brain disorders. Here, this study reports on a strain-sensitive granular adhesive inspired by the core-shell architectures of natural basil seeds for iHMI as well as human-metaverse interfacing. The granular adhesive sensor consists of easily fragmented hydropellets as a core and tissue-adhesive catecholamine layers as a shell, satisfying great on-skin injectability, ionic-electrical conductivity, and sensitive resistance changes through reversible yet robust cohesion among the hydropellets. Particularly, it is found that the ionic-electrical self-doping of the catecholamine shell on hydrosurfaces leads to a compact ion density of the materials. Based on these physical and electrical properties of the sensor, it is demonstrated that successful iHMI integration with a robot arm in both real and virtual environments enables robotic control by finger gesture and haptic feedback. This study expresses benefits of using granular hydrogel-based strain sensors for implementing on-skin writable bioelectronics and their bridging into the metaverse world.

Extraction and characterization of polysaccharide from fermented mycelia of Coriolus versicolor and its efficacy for treating nonalcoholic fatty liver disease

Coriolus versicolor, a popular traditional Chinese medicinal herb, is widely used in China to treat spleen and liver diseases; however, the beneficial effects of C. versicolor polysaccharides (CVPs) on nonalcoholic fatty liver disease (NAFLD) remain elusive. Herein we isolated and purified a novel CVP (molecular weight, 17,478 Da) from fermented mycelium powder. This CVP was composed of mannose, galacturonic acid, glucose, galactose, xylose, and fucose at a molar ratio of 22:1:8:15:10:3. Methylation, gas chromatography-mass spectrometry, and nuclear magnetic resonance analyses indicated that the CVP backbone consisted of →1)-β-D-Man-(6,4→1)-α-D-Gal-(3→1)-α-D-Man-(4→1)-α-D-Gal-(6→, with branches of →1)-α-D-Glc-(6→1)-α-D-Man-(4,3→1)-β-D-Xyl-(2→1)-β-D-Glc on the O-6 position of →1)-β-D-Man-(6,4→ of the main chain. The secondary branches linked to the O-4 position of →1)-α-D-Man-(4,3→ with the chain of →1)-α-D-Fuc-(4→1)-α-D-Man. Further, CVP treatment alleviated the symptoms of NAFLD in an HFD-induced mice model. CVP altered gut microbiota, predominantly suppressing microbes associated with bile acids both in the serum and cecal contents. In vitro data showed that CVP reduced HFD-induced hyperlipidemia via farnesoid X receptor. Our results improve our understanding of the mechanisms underlying the cholesterol- and lipid-lowering effects of CVP and indicate that CVP is a promising candidate for NAFLD therapy.

The detection of the captured circulating tumor cells on the core-shell nanofibrous membrane using hyaluronic acid-functionalized graphene quantum dots

In recent years, cancerous cases have increased remarkably worldwide, and metastasis is the leading cause of death. Therefore, research on the early detection of cancer and metastasis has expanded to aid successful cancer treatment. Here in this paper, at the first step, an electrospun nanofibrous membrane (NFM) with a core-shell structure was fabricated from PCL and HA to achieve cancer cell capturing (about 75% of cells). On the other hand, hyaluronic acid (HA)-functionalized graphene quantum dots (GQDs) were used to detect captured cancer cells on NFM through the changes in photoluminescence intensity. Therefore, CD44 receptor-HA interaction is the main principle used for both entrapment and detection of cancer cells. Results demonstrated the GQD-HA fluorescent intensity of solution decreased through the increase of the captured cancer cell numbers on NFM, which is related to the more adsorption of GQD nanocomposites to the CD44 receptors. In contrast, this intensity for noncancerous cells was steady with any cell concentrations. This difference shows the system's remarkable selectivity and specificity, which can be crucial in fluorescent imaging for accurate cancer diagnosis.

Novel Crosslinked HA Hydrogel Films for the Immediate Release of Active Ingredients

Novel crosslinked hyaluronic acid (HA) hydrogel films were previously invented by reacting the HA polymer with the PT (Pentaerythritol Tetra-acrylate) crosslinker over basic pH conditions in the oven. HA is considered a natural polymer present in cosmetic as well as pharmaceutical formulations. This current study aimed to highlight the effect of loading method (post-loading and in situ) of selected actives (salicylic acid and niacinamide B3) in the hydrogel films and then study their release kinetics. Differential scanning colometry (DSC) and Fourier transform infrared spectroscopy (FTIR) analysis evidenced the loading of the actives and full release from the HA hydrogel films, while the scanning electron microscopy (SEM) demonstrated the morphological changes to the films during the study by comparing the average molecular weight between crosslinks (M¯c), gel fraction, crosslinking density (Ve) and mesh size (ξ) of the films. The loading percentage of the SA and B3 showed high percentage loading of actives via both loading methods. In conclusion, the (95–100%) release of the actives achieved from the HA hydrogel films within 10 min revealed that the films are an efficient immediate release system of actives.

Gut microbiota mediated hypoglycemic effect of Astragalus membranaceus polysaccharides in db/db mice

Gut microbiota has been reported to be closely associated with Type-II diabetes. Restoration of disordered gut microbiota ecosystem has been developed into a therapeutic strategy and gradually applied on Type-II diabetes treatment with both western drugs and herbal polysaccharides. Although Astragalus membranaceus polysaccharides (AMP) have also been used to treat Type-II diabetes, no study investigated correlations between gut microbiota regulation and its hypoglycemic effect. In the present study, the role of gut microbiota on the hypoglycemic effect of AMP in db/db mice was investigated for the first time. Sixteen days treatment of AMP at the dosage of 600 mg/kg in db/db mice not only alleviated its diabetic symptoms significantly but also restored its gut microbiota community with increased production of fecal short chain fatty acids (SCFA). Our further Pearson correlation analyses revealed that the relative abundance of two intestinal bacteria, Akkermansia and Faecalibaculum, were significantly positively correlated with the hypoglycemic effect of AMP as well as fecal SCFA production. It was also noted that treatment of AMP resulted in increased secretion of glucagon-like peptide-1 (GLP-1) in serum and enhanced intestinal integrity. Further mechanistic study revealed that the increased SCFA after AMP treatment could stimulate GLP-1 secretion and improve intestinal integrity via enhancing the expression of G protein-coupled receptors 41/43 and tight junction proteins (Occudin and ZO-1), respectively, leading to the alleviation of diabetic symptoms in db/db mice.

Analysis of Chemical Structure and Antibiofilm Properties of Exopolysaccharides from Lactiplantibacillus plantarum EIR/IF-1 Postbiotics

Previous studies have indicated that the exopolysaccharides of lactic acid bacteria exhibit antibiofilm activity against non-oral bacteria by preventing their initial adhesion to surfaces and by downregulating the expression of genes responsible for their biofilm formation. The aims of this study were to (1) characterize the exopolysaccharides (EPSs) of Lactobacillus plantarum EIR/IF-1 postbiotics, (2) test their antibiofilm effect on dual biofilms, and (3) evaluate their bacterial auto-aggregation, co-aggregation, and hydrocarbon-binding inhibitory activity. The EPSs were characterized by FTIR, HPLC, and thermogravimetric analysis. Bacterial auto- and co-aggregation were tested by Kolenbrander’s method and hydrocarbon binding was tested by Rosenberg’s method. Dual biofilms were formed by culturing Fusobacterium nucleatum ATCC 25586 with one of the following bacteria: Prevotella denticola ATCC 33185, P. denticola AHN 33266, Porphyromonas gingivalis ATCC 33277, P. gingivalis AHN 24155, and Filifactor alocis ATCC 35896. The EPSs contained fractions with different molecular weights (51 and 841 kDa) and monosaccharides of glucose, galactose, and fructose. The EPSs showed antibiofilm activity in all the biofilm models tested. The EPSs may have inhibited bacterial aggregation and binding to hydrocarbons by reducing bacterial hydrophobicity. In conclusion, the EPSs of L. plantarum EIR/IF-1, which consists of two major fractions, exhibited antibiofilm activity against oral bacteria, which can be explained by the inhibitory effect of EPSs on the auto-aggregation and co-aggregation of bacteria and their binding to hydrocarbons.

Heparosan-based self-assembled nanocarrier for zinc(II) phthalocyanine for use in photodynamic cancer therapy

Zinc(II) phthalocyanine (ZnPc) is a promising photosensitizer in photodynamic therapy (PDT) for melanoma treatment. However, the poor solubility of ZnPc limits its application. To overcome this limitation, heparosan (HP)-based nanoparticles were prepared by anchoring the l-lysine-linked α-linolenic acid branch to the carboxylic acid group to produce amphiphilic conjugates named heparosan with an l-lysine-linked α-linolenic acid branch (HLA). HLA conjugates could self-assemble into spherical nanoparticles in aqueous media and encapsulate ZnPc to form HLA-ZnPc nanoparticles. The cellular uptake of ZnPc could be improved by HLA carriers. These nanoparticles presented excellent photodynamic-mediated toxicity against mouse melanoma cells (B16) by markedly upregulating the intracellular reactive oxygen species (ROS) levels while showing no cytotoxicity to either B16 or normal cells (L02 and HK-2 cells) in the dark. Furthermore, HLA-ZnPc displayed excellent stability in both powder and Roswell Park Memorial Institute (RPMI) 1640 medium, indicating its promise for application in drug delivery and PDT. These results revealed a strategy for HP-based enhancement of ZnPc in PDT efficacy.

Injectable Hydrogels Based on Inter-Polyelectrolyte Interactions between Hyaluronic Acid, Gelatin, and Cationic Cellulose Nanocrystals

The present work dealt with the development of physically cross-linked injectable hydrogels with potential applications in tissue engineering. The hydrogels were composed of a ternary mixture of a polyanion and a polyampholyte, hyaluronic acid (HA) and gelatin, respectively, bridged by cationic cellulose nanocrystals (cCNCs). A 3D network is formed by employing attractive electrostatic interactions and hydrogen bonding between these components under physiological conditions. The hydrogels demonstrated low viscosity at high stresses, enabling easy injection, structural stability at low stresses (<15 Pa), and nearly complete structure recovery within several minutes. Increasing the cCNC content (>3%) reduced hydrogel swelling and decelerated the degradation in phosphate-buffered saline as compared to that in pure HA and HA-gelatin samples. Biological evaluation of the hydrogel elutions showed excellent cell viability. The proliferation of fibroblasts exposed to elutions of hydrogels with 5% cCNCs reached ∼200% compared to that in the positive control after 11 days. Considering these results, the prepared hydrogels hold great potential in biomedical applications, such as injectable dermal fillers, 3D bioprintable inks, or 3D scaffolds to support and promote soft tissue regeneration.

Effect of crosslinking strategy on the biological, antibacterial and physicochemical performance of hyaluronic acid and ɛ-polylysine based hydrogels

The design of multifunctional hydrogels based on bioactive hyaluronic acid (HA) and antibacterial cationic polymer ɛ-poly-l-lysine (ε-PL) is a promising tool in tissue engineering applications. In the current study, we have designed hyaluronic acid and ɛ-polylysine composite hydrogel systems with antibacterial and cell attractive properties. Two distinct crosslinking approaches were used: the physical crosslinking based on electrostatic attractions and the chemical crosslinking of charged functional groups (-NH₂ and -COOH). The impact of the crosslinking strategy on fabricated hydrogel molecular structure, swelling behavior, gel fraction, morphology, porosity, viscoelastic properties, antibacterial activity, and in vitro biocompatibility was evaluated. Both chemically and physically crosslinked HA/ԑ-PL hydrogels demonstrated fast swelling behavior and long-term stability for at least 28 days, as well as similar order of stiffness (10-30 kPa). We demonstrated that physically crosslinked hydrogels inhibited over 99.999% of Gram-negative E. coli, while chemically crosslinking strategy led to the antibacterial efficiency decrease. However, cell viability was significantly improved, confirming the importance of the applied crosslinking approach to the antibacterial activity and in vitro biocompatibility. The distinct differences in the physicochemical and biological properties of the developed materials provide new opportunities to design next-generation functional composite hydrogel systems.

Decellularization of Wharton’s Jelly Increases Its Bioactivity and Antibacterial Properties

The field of regenerative medicine has recently seen an emerging trend toward decellularized extracellular matrix (ECM) as a biological scaffold for stem cell-delivery. Human umbilical cord represents a valuable opportunity from both technical and ethical point of view to obtain allogenic ECM. Herein, we established a protocol, allowing the full removal of cell membranes and nuclei moieties from Wharton’s jelly (WJ) tissue. No alterations in the ECM components (i.e., collagen, GAG content, and growth factors), physical (i.e., porosity and swelling) and mechanical (i.e., linear tensile modulus) properties were noticed following WJ processing. Furthermore, no effect of the tissue processing on macromolecules and growth factors retention was observed, assuring thus a suitable bioactive matrix for cell maintenance upon recellularization. Based on the in vitro and in vivo biodegradability and stromal cell homing capabilities, decellularized WJ could provide an ideal substrate for stromal cells adhesion and colonization. Interestingly, the tissue processing increased the antibacterial and antiadhesive properties of WJ against Staphylococcus aureus and Staphylococcus epidermidis pathogens. Altogether, our results indicate that decellularized WJ matrix is able to limit Staphylococcus-related infections and to promote stromal cell homing, thus offering a versatile scaffold for tissue regenerative medicine.

Preparation and characterization of 2-deacetyl-3-O-sulfo-heparosan and its antitumor effects via the fibroblast growth factor receptor pathway

Heparosan, with a linear chain of disaccharide repeating units of → 4) β-D-glucuronic acid (GlcA) (1 → 4)-α-D-N-acetylglucosamine (GlcNAc) (1→, is a potential starting chemical for heparin synthesis. However, the chemoenzymatic synthesis of single-site sulfated heparosan and its antitumor activity have not been studied. In this study, 2-deacetyl-3-O-sulfo-heparosan (DSH) was prepared successively by the N-deacetylation chemical reaction and enzymatic modification of human 3-O-sulfotransferase-1 (3-OST-1). Structural characterization of DSH was shown the success of the sulfation with the sulfation degree of 0.87. High performance gel permeation chromatography (HPGPC) analysis revealed that DSH had only one symmetrical sharp peak with a molecular weight of 9.6334 × 10⁴ Da. Biological function studies showed that DSH could inhibit tumor cell (A549, HepG2 and HCT116) viability and induce the apoptosis of A549 cells. Further in vitro mechanistic studies showed that DSH may induce apoptosis via the JNK signaling pathway, and the upstream signal of this process may be fibroblast growth factor receptors. These results indicated that DSH could be developed as one of a potential chemical for tumor treatment.

Smart pH-Sensitive Hydrogel Based on the Pineapple Peel-Oxidized Hydroxyethyl Cellulose and the Hericium erinaceus Residue Carboxymethyl Chitosan for Use in Drug Delivery

Pineapple and hericium erinaceus (HE) produce a lot of residues in the process of food processing. These processed residues are good potential derivative precursors. In this investigation, a simple and non-toxic method was developed to prepare one new composite hydrogel by the Schiff base reaction between the aldehyde group of oxidized hydroxyethyl cellulose (OHEC) from processed pineapple peel residue and the amino group of carboxymethyl chitosan (CMCS) from processed HE residue. Subsequently, a series of experiments toward these new hydrogel polymers including structure characterization and performances were applied. The resultant hydrogel polymers were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy and confirmed with thermogravimetry. It was observed that the modification of cellulose and chitin was adequate, and the synthesis of OHEC/CMCS hydrogel polymers was successful. The gelation time experiments indicated that the shortest gel time was 33 s at a mass ratio of 4:6 (OHEC-70:CMCS). The hydrogel showed good swelling properties. The maximum swelling rate reached 11.58 g/g, and the swelling rate decreased with the increase of the oxidation degree of OHEC. The drug delivery applications of the prepared hydrogel were evaluated with bovine serum albumin (BSA) as a model drug releasing in vitro. It was discovered that the BSA release from the hydrogel was pH sensitive under simulated gastrointestinal conditions. All of these attributes indicate that the novel prepared hydrogel polymers have the potential as good carriers for oral delivery of protein-type drugs.

Screening of the Chemical Composition and Identification of Hyaluronic Acid in Food Supplements by Fractionation and Fourier-Transform Infrared Spectroscopy

Hyaluronic acid, together with collagen, vitamins or plant extracts, is a part of many cosmetic and food preparations. For example, this polysaccharide is used in formulation of many food supplements due to its protective effects on human health. In this work, the screening of the chemical composition of three chosen dietary supplements (powder, tablets and capsules) containing hyaluronic acid was carried out using Fourier-transform infrared spectroscopy. Because of the low amount of analyte in all these samples, it was isolated or concentrated prior to the analysis using a suitable sequential fractionation protocol. Individual isolation procedures were established for each sample based on their declared composition. Firstly, the major components such as collagen or vitamins were removed to obtain polysaccharide fractions by the enzymatic treatment and/or washing out with the appropriate solvents. In some cases, the water insoluble part was removed from the rest dissolved in water. Then, hyaluronic acid was precipitated with copper(II) cations and thus separated from the other polysaccharides. Finally, the analyte was identified in the enriched fractions by the characteristic vibrational bands. The amount of hyaluronic acid in the purified fractions was determined in three ways: gravimetrically, spectrophotometrically, and using isotachophoresis. The combination of the appropriate preparative and analytical steps led to the successful evaluation of chemical composition, finding and quantification of hyaluronic acid in all the studied samples.

Biofabrication of a Hyaluronan/Bacterial Cellulose Composite Nanofibril by Secretion from Engineered Gluconacetobacter

Naturally occurring polysaccharides, such as cellulose, hemicellulose, and chitin, have roles in plant skeletons and/or related properties in living organisms. Their hierarchically regulated production systems show potential for designing nanocomposite fabrication using engineered microorganisms. This study has demonstrated that genetically engineered Gluconacetobacter hansenii (G. hansenii) individual cells can fabricate naturally composited nanofibrils by simultaneous production of hyaluronan (HA) and bacterial cellulose (BC). The cells were manipulated to contain hyaluronan synthase and UDP-glucose dehydrogenase genes, which are essential for HA biosynthesis. Fluorescence microscopic observations indicated the production of composited nanofibrils and suggested that HA secretion was associated with the cellulose secretory pathway in G. hansenii. The gel-like nanocomposite materials produced by the engineered G. hansenii exhibited superior properties compared with conventional in situ nanocomposites. This genetic engineering approach facilitates the use of G. hansenii for designing integrated cellulose-based nanomaterials.

Characterisation of Hyaluronic Acid Blends Modified by Poly(N-Vinylpyrrolidone)

The viscosity behaviour and physical properties of blends containing hyaluronic acid (HA) and poly(N-vinylpyrrolidone) (PVP) were studied by the viscometric technique, steady shear tests, tensile tests and infrared spectroscopy. Viscometric and rheological measurements were carried out using blends of HA/PVP with different HA weight fractions (0, 0.2, 0.5, 0.8 and 1). The polymer films and HA/PVP blend films were prepared using the solution casting method. The study of HA blends by viscometry showed that HA/PVP was miscible with the exception of the blend with high HA content. HA and its blends showed a shear-thinning flow behaviour. The non-Newtonian indices (n) of HA/PVP blends were calculated by the Ostwald-de Waele equation, indicating a shear-thinning effect in which pseudoplasticity increased with increasing HA contents. Mechanical properties, such as tensile strength and elongation at the break, were higher for HA/PVP films with w_HA = 0.5 compared to those with higher HA contents. The elongation at the break of HA/PVP blend films displayed a pronounced increase compared to HA films. Moreover, infrared analysis confirmed the existence of interactions between HA and PVP. The blending of HA with PVP generated films with elasticity and better properties than homopolymer films.

Hyaluronic acid-graphene quantum dot nanocomposite: Potential target drug delivery and cancer cell imaging

Nowadays, the use of nanoparticle-based drug delivery systems has received much more attention. In this regard, here, graphene quantum dots (GQD) were used as drug carriers as well as imaging agents for cancer cells. In order to optimize the dose of the drug and reduce its side effects for healthy cells, hyaluronic acid was decorated on the surface of GQD to target cancer cells. The morphology and size of the synthesized nanoparticles alone and conjugated with hyaluronic acid were investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM); TEM images revealed a particles size of ∼5.67 and ∼8.69 nm, respectively. In the presence of 1-ethyl-3-[3(dimethylamino)propyl]carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS), hyaluronic acid was bounded to dopamine hydrochloride and was prepared to react with GQD. After synthesis of graphene quantum dot-hyaluronic acid nanocomposite, curcumin (CUR) as a drug model was loaded on the synthesized nanocarriers, and its loading percentage was measured. The results showed that 98.02% of the drug was loaded on the nanocarriers. Also, the conjugation of each agent on the nanocarrier was approved by photoluminescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), and UV-visible absorption techniques, and the results showed that the reactions were performed correctly. The effect of GQD, graphene quantum dot-hyaluronic acid, CUR, graphene quantum dot-hyaluronic acid-CUR on the viability of HeLa and L929 cells was evaluated by the MTT test. The results showed that the synthesized nanocarrier is completely biocompatible, and the drug nanocarriers reduce HeLa cell viability significantly due to the mediation of hyaluronic acid-CD44 for drug cell uptake. Simultaneously with drug delivery, the other goal of these nanocarriers is to image cancer cells by emitting fluorescent light. Fluorescent microscopy showed that these nanocarriers were adsorbed on HeLa cells, unlike L929 cells.

Promising tamoxifen-loaded biocompatible hybrid magnetic nanoplatforms against breast cancer cells: synthesis, characterization and biological evaluation

Improved efficacy and safety of tamoxifen-loaded hybrid nanocarriers based on Fe₃O₄ nanoparticles, l-cysteine and hyaluronic acid for breast cancer therapy.

Potential improvement of the immune response of chickens against E. coli vaccine by using two forms of chitosan nanoparticles

Colibacillosis disease has an important economic impact on poultry production worldwide. It is one of the most common causes of mortality in commercial layer and breeder chickens. Avian pathogenic Escherichia coli (APEC) is the main cause of this disease. Nanoparticles have been widely used in vaccine design as both adjuvants and antigen delivery vehicles. The present study aimed to produce an efficient vaccine from E. coli serogroups O1 and O78 to help in controlling colibacillosis in chicken using two forms of chitosan (CS) and ascorbate chitosan (AsCS) nanoparticles. Nanovaccines has been prepared through loading and encapsulation of outer membrane and flagellar antigen on CS and AsCS nanoparticles with loading efficiency 86, 63,55, 48% for CS-loaded-, Cs-capsulated-, AsCS-loaded- and AsCS-capsulated-E. coli Antigen, respectively. Two hundred specific pathogens free (SPF) 3-weeks old broiler chickens were used and divided into four groups to investigate the immune response of nanovaccines. The immune response was measured by the microagglutination, ELISA, and challenge test. From results, it could be concluded that generally adding chitosan NPs is capable of improving vaccine efficacy via the induction of strong immunity. Moreover, we recommend the production of the nanovaccine CS-capsulated -antigen from E. coli O1 and O78 serotypes to be used as a potent vaccine to aid in controlling colibacillosis. Also, the ascorbate chitosan is a great alternate for the initiation of a potent immune response in critical infection cases.

Miscibility Studies of Hyaluronic Acid and Poly(Vinyl Alcohol) Blends in Various Solvents

In this study, blends based on hyaluronic acid (HA) and poly(vinyl alcohol) (PVA) were characterized by the viscometric method, steady shear rheological tests and FTIR spectroscopy (Fourier Transform Infrared Spectroscopy). Viscometric studies showed the miscibility of HA and PVA in distilled water: 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl. The method proposed by Garcia et al. was applied to assess the miscibility of polymers, while Δ[η] and Δb were introduced to determine of miscibility from the Huggins plots. The viscometric data showed that the attractive forces of HA and PVA were dominant when dissolved in 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl, while, in distilled water, repulsive forces played the leading role. All polymer solutions were well characterized using a power law model, and exhibited non-Newtonian behavior with pseudoplasticity increasing with the increasing weight fraction of HA in 0.1 mol dm-3 NaCl and 0.1 mol dm-3 HCl. FTIR studies exhibited the formation of new intermolecular interactions between HA and PVA via hydrogen bonding.

Control of microbial biofilm formation as an approach for biomaterials synthesis

The search for new biomaterials with superior mechanical properties is the focus in the area of materials science. A promising pathway is drawing inspiration from nature to design and develop materials with enhanced properties. In this work, a novel strategy to produce functionalized supramolecular bionanomaterials from the microbial biofilm is reported. Tuneable biofilms with specific characteristics were obtained by controlling the culture condition of the microorganism. When the exopolysaccharide (EPS) production was desired the tryptone was the best nutritional component for the EPS production into the biofilm. However, for the expression of a high amount of amyloid protein the combination of peptone and glucose was the best nutritional choice. Each biofilm obtained showed its owner rheology properties. These properties were altered by the addition of extracellular DNA, which increased the viscosity of the biofilm and induced a viscoelastic hydrogel behavior. Besides, as a proof of concept of bionanomaterial, a novel supramolecular polymeric hybrid EPS-Amyloid protein (EPAP) was obtained from the biofilm and it was tested as a new natural functionalized support for enzyme immobilization. The results suggest that this technology could be used as a new concept to obtain biomaterials from biofilms by controlling the nutritional conditions of a microorganism. Understanding environmental factors affecting biofilm formation will help the development of methods for controlling biofilm production and therefore obtaining new biomaterials.

Influence of chitosan average molecular weight on degradation and stability of electrodeposited conduits

Tubular chitosan-based hydrogels, obtained in an electrodeposition process, are subject of degradation and stability studies. The implants are prepared from polymer with different average molecular weight. This approach allows fabricating structures that vary in mass and wall thickness. The obtained implants are incubated in phosphate buffered solution (pH 7.4) with or without lysozyme up to 56 days at 37 °C. Subsequently, chemical, physical as well as mechanical properties of implants are evaluated. Although the initial physicomechanical properties are different, they change upon incubation and remain similar over its period. Finally, in vitro biocompatibility of implants is proven after assessing their action towards mHippoE-18 embryonic hippocampal cells and THP1-XBlue™ monocytes. Since dimensions of nerves and the gap length differ across the body and injury, respectively, the possibility to control properties of chitosan applied gives a tool to prepare implants with wall thickness adjusted to the specific peripheral nerve injury case.

Polyanionic Hydrogels as Reservoirs for Polycationic Antibiotic Substitutes Providing Prolonged Antibacterial Activity

Implantation of biomedical devices is often followed by bacterial infections that may seriously affect implant functionalities and lead to their failure. In the context of bacterial resistance to antibiotics, which is a growing problem worldwide, new strategies that are able to overcome these problems are needed. In this work, we introduce a new formulation of hyaluronic acid (HA)-based antimicrobial material: HA hydrogels loaded with polyarginine (PAR), a polycationic antibiotic substitute. The loading is possible through electrostatic interactions between negatively charged HA and positively charged PAR. Such hydrogels absorb high quantities of PAR, which are then gradually released from the hydrogel. This original system provides a long-lasting antibacterial effect on an in vitro model of repetitive infection, thus demonstrating a strong potential to fight multiple rounds of infections that are resistant to antibiotic treatment. In addition, HA-PAR hydrogels could be deposited onto/into medical devices such as wound dressings and mesh prostheses used in clinical applications. Finally, we performed first in vivo tests of hydrogel-coated mesh materials to verify their biocompatibility in a rat model, which show no difference between control HA hydrogel and PAR-loaded hydrogel in terms of inflammation.

Studies on the Drug Loading and Release Profiles of Degradable Chitosan-Based Multilayer Films for Anticancer Treatment

This study demonstrates the possibility of developing a rapidly degradable chitosan-based multilayer film for controlled drug release. The chitosan (CHI)-based multilayer nanofilms were prepared with three different types of anions, hyaluronic acid (HA), alginic acid (ALG) and tannic acid (TA). Taking advantage of the Layer-by-Layer (LBL) assembly, each multilayer film has different morphology, porosity and thickness depending on their ionic density, molecular structure and the polymer functionality of the building blocks. We loaded drug models such as doxorubicin hydrochloride (DOX), fluorescein isothiocyanate (FITC) and ovalbumin (Ova) into multilayer films and analyzed the drug loading and release profiles in phosphate-buffered saline (PBS) buffer with the same osmolarity and temperature as the human body. Despite the rapid degradation of the multilayer film in a high pH and salt solution, the drug release profile can be controlled by increasing the functional group density, which results in interaction with the drug. In particular, the abundant carboxylate groups in the CHI/HA film increased the loading amount of DOX and decreased rapid drug release. The TA interaction with DOX via electrostatic interaction, hydrogen bonding and hydrophobic interaction showed a sustained drug release profile. These results serve as principles for fabricating a tailored multilayer film for drug delivery application.

Understanding hyaluronic acid induced variation of water structure by near-infrared spectroscopy

In order to understand the hydration effect of hyaluronic acid (HA) in aqueous solution, near-infrared (NIR) spectroscopy was used to investigate the HA aqueous solutions at different concentrations and temperature. As HA concentration was raised, there was a nonlinear change in absorption value in the first overtone region of OH, indicating the changes of hydration water. A reconstructed spectrum based on principal component analysis (PCA) was established and analyzed with the concept of aquaphotomics. The results showed that HA acted as a structure maker to make water molecules arranged in order. Water species with two hydrogen bonds (S2) and three hydrogen bonds (S3) showed the decrease at low concentration range of 0-40 mg/mL, but increased at higher concentration, indicating the difference in water species at different HA concentration. Meanwhile, HA had the ability to improve the thermal stability of water structure, suggesting a potential bio-protective function. This study provides a unique perspective on the molecular interactions between HA and water molecules, which is helpful for understanding the role of HA in life process and may serve as the basis for HA applications.

Elucidation of the time-dependent degradation process in insoluble hyaluronic acid formulations with a controlled degradation rate

Degradation rate of hyaluronic acid to prolong its stability in vivo would be beneficial. We investigated a potential solution for prolonging the stability of hyaluronic acid within the body. We focused on decreasing the swelling ratio to slow the degradation rate of hyaluronic acid by insolubilizing sodium hyaluronate without using potentially harmful substances such as crosslinkers or modifiers. Hyaluronic acid formulations were created with three different swelling ratios and time-dependent morphological changes in hyaluronic acid formulations and were scored based on each swelling ratio. In vivo degradation was modeled in simulated body fluid and the extent of decay of test membranes were monitored over time. Results showed that, by adjusting the swelling ratio, the degradation rate of hyaluronic acid formulation could be controlled. Our research could lead to improvements in many products, not only preventive materials for postoperative adhesions, but also pharmaceutical products such as osteoarthritis treatments and cosmetic medicines.

Thermal Conductivity of Protein-Based Materials: A Review

Fibrous proteins such as silks have been used as textile and biomedical materials for decades due to their natural abundance, high flexibility, biocompatibility, and excellent mechanical properties. In addition, they also can avoid many problems related to traditional materials such as toxic chemical residues or brittleness. With the fast development of cutting-edge flexible materials and bioelectronics processing technologies, the market for biocompatible materials with extremely high or low thermal conductivity is growing rapidly. The thermal conductivity of protein films, which is usually on the order of 0.1 W/m·K, can be rather tunable as the value for stretched protein fibers can be substantially larger, outperforming that of many synthetic polymer materials. These findings indicate that the thermal conductivity and the heat transfer direction of protein-based materials can be finely controlled by manipulating their nano-scale structures. This review will focus on the structure of different fibrous proteins, such as silks, collagen and keratin, summarizing factors that can influence the thermal conductivity of protein-based materials and the different experimental methods used to measure their heat transfer properties.

Practical guide to characterize biomolecule adsorption on solid surfaces (Review)

The control over the adsorption or grafting of biomolecules from a liquid to a solid interface is of fundamental importance in different fields, such as drug delivery, pharmaceutics, diagnostics, and tissue engineering. It is thus important to understand and characterize how biomolecules interact with surfaces and to quantitatively measure parameters such as adsorbed amount, kinetics of adsorption and desorption, conformation of the adsorbed biomolecules, orientation, and aggregation state. A better understanding of these interfacial phenomena will help optimize the engineering of biofunctional surfaces, preserving the activity of biomolecules and avoiding unwanted side effects. The characterization of molecular adsorption on a solid surface requires the use of analytical techniques, which are able to detect very low quantities of material in a liquid environment without modifying the adsorption process during acquisition. In general, the combination of different techniques will give a more complete characterization of the layers adsorbed onto a substrate. In this review, the authors will introduce the context, then the different factors influencing the adsorption of biomolecules, as well as relevant parameters that characterize their adsorption. They review surface-sensitive techniques which are able to describe different properties of proteins and polymeric films on solid two-dimensional materials and compare these techniques in terms of sensitivity, penetration depth, ease of use, and ability to perform "parallel measurements."

Infrared Spectroscopic Quantification of Methacrylation of Hyaluronic Acid: A Scaffold for Tissue Engineering Applications

Methacrylated hyaluronic acid (MeHA) has been used extensively in tissue engineering and drug delivery applications. The degree of methacrylation (DM) of HA impacts hydrogel crosslinking, which is of pivotal importance for cell interactions. The methacrylation reaction occurs over several hours, and DM is currently assessed post reaction and after dialysis of the solution, using nuclear magnetic resonance (1H NMR) data. Thus, there is little control over exact DM in a specific reaction. Here, infrared (IR) spectroscopy in attenuated total reflection (ATR) mode was investigated as an alternate modality for assessment of the DM of HA hydrogels, including during the reaction progression. Attenuated total reflection is a low-cost technique that is widely available in research and industry labs that can be used online during the reaction process. Strong correlations were achieved with IR-derived peak heights from dialyzed and lyophilized samples at 1708 cm-1 (from the methacrylic ester carbonyl vibration), and 1H NMR values ( R = 0.92, P = 6.56E-11). Additional IR peaks of importance were identified using principal component analysis and resulted in significant correlations with the 1H NMR DM parameter: 1454 cm-1 ( R = 0.85, P = 2.81E-8), 1300 cm-1 ( R = 0.95, P = 4.50E-14), 950 ( R = 0.85, P = 3.55E-8), 856 cm-1 ( R = 0.94, P = 1.20E-12), and 809 cm-1 ( R = 0.93, P = 3.54E-12). A multiple linear regression model to predict 1H NMR-derived DM using the 1708, 1300, and 1200 cm-1 peak heights as independent variables resulted in prediction with an error of 3.2% using dialyzed and lyophilized samples ( P < 0.001). Additionally, a multilinear regression model to predict the DM in undialyzed liquid MeHA samples obtained during the reaction process using similar peak height positions as independent variables resulted in a prediction error of 0.81% ( P < 0.05). Thus, IR spectroscopy can be utilized as an alternate modality to 1H NMR for quantification of the DM of MeHA while sampling either on-line during the methacrylation reaction as well as in post-lyophilized products. This could greatly simplify workflow for tissue engineering and other applications.

The hydration mechanism and hydrogen bonding structure of 6-carboxylate chitooligosaccharides superabsorbent material prepared by laccase/TEMPO oxidation system

6-carboxylate chitooligosaccharides (6-CCOS), as a superabsorbent material, were prepared by way of the laccase/TEMPO oxidation system. It exhibited a higher moisture-absorption ability and stronger affinity for water. To understand the real reasons for this, the hydrogen bonding structure of 6-CCOS and the hydration mechanism of the molecule were investigated using infrared (IR), differential scanning calorimetry (DSC), and nuclear magnetic resonance (NMR). It was found that the introduction of a strongly hydrophilic carboxylate ion on the C6 site of chitooligosaccharides molecule was conducive to the enhancement of the interaction between polysaccharide polymers and water molecules. The most important was the formation of hydrogen bonds connected between carboxylate ion and residual water. In addition, the hydration mechanism of 6-CCOS molecules was presumed to be that more water molecules from outside were incorporated into the already embedded water molecules within the polymer. The whole molecule was woven into a huge water-polymer network structure through intermolecular hydrated hydrogen bonds.