Controlling promoter strength and regulation inSaccharomyces cerevisiaeusing synthetic hybrid promoters

Modular deregulation of central carbon metabolism for efficient xylose utilization in Saccharomyces cerevisiae

The tightly regulated central carbon metabolism in Saccharomyces cerevisiae, intricately linked to carbon sources utilized, poses a significant challenge to engineering efforts aimed at increasing the flux through its different pathways. Here, we present a modular deregulation strategy that enables high conversion rates of xylose through the central carbon metabolism. Specifically, employing a multifaceted approach encompassing five different engineering strategies-promoter engineering, transcription factor manipulation, biosensor construction, introduction of heterologous enzymes, and expression of mutant enzymes we engineer different modules of the central carbon metabolism at both the genetic and enzymatic levels. This leads to an enhanced conversion rate of xylose into acetyl-CoA-derived products, with 3-hydroxypropionic acid (3-HP) serving as a representative case in this study. By implementing a combination of these approaches, the developed yeast strain demonstrates a remarkable enhancement in 3-HP productivity, achieving a 4.7-fold increase when compared to our initially optimized 3-HP producing strain grown on xylose as carbon source. These results illustrate that the rational engineering of yeast central metabolism is a viable approach for boosting the metabolic flux towards acetyl-CoA-derived products on a non-glucose carbon source.

Considerations for Domestication of Novel Strains of Filamentous Fungi

Fungi, especially filamentous fungi, are a relatively understudied, biotechnologically useful resource with incredible potential for commercial applications. These multicellular eukaryotic organisms have long been exploited for their natural production of useful commodity chemicals and proteins such as enzymes used in starch processing, detergents, food and feed production, pulping and paper making and biofuels production. The ability of filamentous fungi to use a wide range of feedstocks is another key advantage. As chassis organisms, filamentous fungi can express cellular machinery, and metabolic and signal transduction pathways from both prokaryotic and eukaryotic origins. Their genomes abound with novel genetic elements and metabolic processes that can be harnessed for biotechnology applications. Synthetic biology tools are becoming inexpensive, modular, and expansive while systems biology is beginning to provide the level of understanding required to design increasingly complex synthetic systems. This review covers the challenges of working in filamentous fungi and offers a perspective on the approaches needed to exploit fungi as microbial cell factories.

Advancing cellulose utilization and engineering consolidated bioprocessing yeasts: current state and perspectives

Despite the lack of implementation of consolidated bioprocessing (CBP) at an industrial scale, this bioconversion strategy still holds significant potential as an economically viable solution for converting lignocellulosic biomass (LCB) into biofuels and green chemicals, provided an appropriate organism can be isolated or engineered. The use of Saccharomyces cerevisiae for this purpose requires, among other things, the development of a cellulase expression system within the yeast. Over the past three decades, numerous studies have reported the expression of cellulase-encoding genes, both individually and in combination, in S. cerevisiae. Various strategies have emerged to produce a core set of cellulases, with differing degrees of success. While one-step conversion of cellulosic substrates to ethanol has been reported, the resulting titers and productivities fall well below industrial requirements. In this review, we examine the strategies employed for cellulase expression in yeast, highlighting the successes in developing basic cellulolytic CBP-enabled yeasts. We also summarize recent advancements in rational strain design and engineering, exploring how these approaches can be further enhanced through modern synthetic biology tools to optimize CBP-enabled yeast strains for potential industrial applications. KEY POINTS: • S. cerevisiae's lack of cellulolytic ability warrants its engineering for industry. • Advancements in the expression of core sets of cellulases have been reported. • Rational engineering is needed to enhance cellulase secretion and strain robustness. • Insights gained from omics strategies will direct the future development of CBP strains.

Recent advances in genetic engineering and chemical production in yeast species

Yeasts have emerged as well-suited microbial cell factory for the sustainable production of biofuels, organic acids, terpenoids, and specialty chemicals. This ability is bolstered by advances in genetic engineering tools, including CRISPR-Cas systems and modular cloning in both conventional (Saccharomyces cerevisiae) and non-conventional (Yarrowia lipolytica, Rhodotorula toruloides, Candida krusei) yeasts. Additionally, genome-scale metabolic models and machine learning approaches have accelerated efforts to create a broad range of compounds that help reduce dependency on fossil fuels, mitigate climate change, and offer sustainable alternatives to petrochemical-derived counterparts. In this review, we highlight the cutting-edge genetic tools driving yeast metabolic engineering and then explore the diverse applications of yeast-based platforms for producing value-added products. Collectively, this review underscores the pivotal role of yeast biotechnology in efforts to build a sustainable bioeconomy.

Promoter engineering with programmable upstream activating sequences in Aspergillus Niger cell factory

BACKGROUND

Aspergillus niger is an important industrial filamentous fungus used to produce organic acids and enzymes. A wide dynamic range of promoters, particularly strong promoters, are required for fine-tuning the regulation of gene expression to balance metabolic flux and achieve the high yields of desired products. However, the limited understanding of promoter architectures and activities restricts the efficient transcription regulation of targets in strain engineering in A. niger.

RESULTS

In this study, we identified two functional upstream activation sequences (UAS) located upstream of the core promoters of highly expressed genes in A. niger. We constructed and characterized a synthetic promoter library by fusing the efficient UAS elements upstream of the strong constitute PgpdA promoter in A. niger. It demonstrated that the strength of synthetic promoters was fine-tuned with a wide range by tandem assembly of the UAS elements. Notably, the most potent promoter exhibited 5.4-fold higher activity than the strongest PgpdA promoter reported previously, significantly extending the range of strong promoters. Using citric acid production as a case study, we employed the synthetic promoter library to enhance citric acid efflux by regulating the cexA expression in A. niger. It showed a 1.6-2.3-fold increase in citric acid production compared to the parent strain, achieving a maximum titer of 145.3 g/L.

CONCLUSIONS

This study proved that the synthetic promoter library was a powerful toolkit for precise tuning of transcription in A. niger. It also underscores the potential of promoter engineering for gene regulation in strain improvement of fungal cell factories.

Versatile xylose and arabinose genetic switches development for yeasts

Inducible transcription systems are essential tools in genetic engineering, where tight control, strong inducibility and fast response with cost-effective inducers are highly desired. However, existing systems in yeasts are rarely used in large-scale fermentations due to either cost-prohibitive inducers or incompatible performance. Here, we developed powerful xylose and arabinose induction systems in Saccharomyces cerevisiae, utilizing eukaryotic activators XlnR and AraRA from Aspergillus species and bacterial repressors XylR and AraRR. By integrating these signals into a highly-structured synthetic promoter, we created dual-mode systems with strong outputs and minimal leakiness. These systems demonstrated over 4000- and 300-fold regulation with strong activation and rapid response. The dual-mode xylose system was fully activated by xylose-rich agricultural residues like corncob hydrolysate, outperforming existing systems in terms of leakiness, inducibility, dynamic range, induction rate, and growth impact on host. We validated their utility in metabolic engineering with high-titer linalool production and demonstrated the transferability of the XlnR-based xylose induction system to Pichia pastoris, Candida glabrata and Candida albicans. This work provides robust genetic switches for yeasts and a general strategy for integrating activation-repression signals into synthetic promoters to achieve optimal performance.

From natural to synthetic: Promoter engineering in yeast expression systems

Synthetic promoters are particularly relevant for application not only in yeast expression systems designed for high-level heterologous protein production but also in other applications such as metabolic engineering, cell biological research, and stage-specific gene expression control. By designing synthetic promoters, researcher can create customized expression systems tailored to specific needs, whether it is maximizing protein production or precisely controlling gene expression at different stages of a process. While recognizing the limitations of endogenous promoters, they also provide important information needed to design synthetic promoters. In this review, emphasis will be placed on some key approaches to identify endogenous, and to generate synthetic promoters in yeast expression systems. It shows the connection between endogenous and synthetic promoters, highlighting how their interplay contributes to promoter development. Furthermore, this review illustrates recent developments in biotechnological advancements and discusses how this field will evolve in order to develop custom-made promoters for diverse applications. This review offers detailed information, explores the transition from endogenous to synthetic promoters, and presents valuable perspectives on the next generation of promoter design strategies.

Advances and perspectives in genetic expression and operation for the oleaginous yeast Yarrowia lipolytica

The utilization of industrial biomanufacturing has emerged as a viable and sustainable alternative to fossil-based resources for producing functional chemicals. Moreover, advancements in synthetic biology have created new opportunities for the development of innovative cell factories. Notably, Yarrowia lipolytica, an oleaginous yeast that is generally regarded as safe, possesses several advantageous characteristics, including the ability to utilize inexpensive renewable carbon sources, well-established genetic backgrounds, and mature genetic manipulation methods. Consequently, there is increasing interest in manipulating the metabolism of this yeast to enhance its potential as a biomanufacturing platform. Here, we reviewed the latest developments in genetic expression strategies and manipulation tools related to Y. lipolytica, particularly focusing on gene expression, chromosomal operation, CRISPR-based tool, and dynamic biosensors. The purpose of this review is to serve as a valuable reference for those interested in the development of a Y. lipolytica microbial factory.

Engineering biology and automation-Replicability as a design principle

Applications in engineering biology increasingly share the need to run operations on very large numbers of biological samples. This is a direct consequence of the application of good engineering practices, the limited predictive power of current computational models and the desire to investigate very large design spaces in order to solve the hard, important problems the discipline promises to solve. Automation has been proposed as a key component for running large numbers of operations on biological samples. This is because it is strongly associated with higher throughput, and with higher replicability (thanks to the reduction of human input). The authors focus on replicability and make the point that, far from being an additional burden for automation efforts, replicability should be considered central to the design of the automated pipelines processing biological samples at scale-as trialled in biofoundries. There cannot be successful automation without effective error control. Design principles for an IT infrastructure that supports replicability are presented. Finally, the authors conclude with some perspectives regarding the evolution of automation in engineering biology. In particular, they speculate that the integration of hardware and software will show rapid progress, and offer users a degree of control and abstraction of the robotic infrastructure on a level significantly greater than experienced today.

A Chimeric ORF Fusion Phenotypic Reporter for Cryptococcus neoformans

The plethora of genome sequences produced in the postgenomic age has not resolved many of our most pressing biological questions. Correlating gene expression with an interrogatable and easily observable characteristic such as the surrogate phenotype conferred by a reporter gene is a valuable approach to gaining insight into gene function. Many reporters including lacZ, amdS, and the fluorescent proteins mRuby3 and mNeonGreen have been used across all manners of organisms. Described here is an investigation into the creation of a robust, synthetic, fusion reporter system for Cryptococcus neoformans that combines some of the most useful fluorophores available in this system with the versatility of the counter-selectable nature of amdS. The reporters generated include multiple composition and orientation variants, all of which were investigated for differences in expression. Evaluation of known promoters from the TEF1 and GAL7 genes was undertaken, elucidating novel expression tendencies of these biologically relevant C. neoformans regulators of transcription. Smaller than lacZ but providing multiple useful surrogate phenotypes for interrogation, the fusion ORF serves as a superior whole-cell assay compared to traditional systems. Ultimately, the work described here bolsters the array of relevant genetic tools that may be employed in furthering manipulation and understanding of the WHO fungal priority group pathogen C. neoformans.

Engineering artificial cross-species promoters with different transcriptional strengths

As a fundamental tool in synthetic biology, promoters are pivotal in regulating gene expression, enabling precise genetic control and spurring innovation across diverse biotechnological applications. However, most advances in engineered genetic systems rely on host-specific regulation of the genetic portion. With the burgeoning diversity of synthetic biology chassis cells, there emerges a pressing necessity to broaden the universal promoter toolkit spectrum, ensuring adaptability across various microbial chassis cells for enhanced applicability and customization in the evolving landscape of synthetic biology. In this study, we analyzed and validated the primary structures of natural endogenous promoters from Escherichia coli, Bacillus subtilis, Corynebacterium glutamicum, Saccharomyces cerevisiae, and Pichia pastoris, and through strategic integration and rational modification of promoter motifs, we developed a series of cross-species promoters (Psh) with transcriptional activity in five strains (prokaryotic and eukaryotic). This series of cross species promoters can significantly expand the synthetic biology promoter toolkit while providing a foundation and inspiration for standardized development of universal components The combinatorial use of key elements from prokaryotic and eukaryotic promoters presented in this study represents a novel strategy that may offer new insights and methods for future advancements in promoter engineering.

Whole-cell bioconversion for producing thymoquinone by engineered Saccharomyces cerevisiae

Thymoquinone, extracted from the black seeds of Nigella sativa, is a natural substance with highly beneficial effects against various human diseases. In this study, we aimed to construct a Saccharomyces cerevisiae strain that, produce thymoquinone from thymol, a relatively inexpensive substrate. To achieve this, cytochrome P450 from Origanum vulgare was expressed in S. cerevisiae for the bioconversion of thymol to thymoquinone, with the co-expression of cytochrome P450 reductase (CPR) from Arabidopsis thaliana, ATR1. Additionally, flexible linkers were used to connect these two enzymes. Furthermore, modifications were performed to expand the endoplasmic reticulum (ER) space, leading to increased thymoquinone production. After integrating the genes into the chromosome and optimizing the media components, a significant improvement in the thymol-to-thymoquinone conversion rate and yield were achieved. This study represents a possibility of the production of thymoquinone, a bioactive ingredient of a plant, using an engineered microbial cell.

Biosynthetic pathway of prescription cucurbitacin IIa and high-level production of key triterpenoid intermediates in engineered yeast and tobacco

Cucurbitacin IIa is a triterpenoid isolated exclusively from Hemsleya plants and a non-steroidal anti-inflammatory drug that functions as the main ingredient of prescription Hemslecin capsules and tablets in China. Synthetic biology provides new strategies for production of such valuable cucurbitacins at a large scale; however, the biosynthetic pathway of cucurbitacin IIa has been unknown, and the heterologous production of cucurbitacins in galactose medium has been expensive and low yielding. In this study, we characterized the functions of genes encoding two squalene epoxidases (HcSE1-2), six oxidosqualene cyclases (HcOSC1-6), two CYP450s (HcCYP87D20 and HcCYP81Q59), and an acyltransferase (HcAT1) in cucurbitacin IIa biosynthesis by heterologous expression in Saccharomyces cerevisiae and Nicotiana benthamiana. We achieved high-level production of the key cucurbitacin precursor 11-carbonyl-20β-hydroxy-Cuol from glucose in yeast via modular engineering of the mevalonate pathway and optimization of P450 expression levels. The resulting yields of 46.41 mg/l 11-carbonyl-20β-hydroxy-Cuol and 126.47 mg/l total cucurbitacin triterpenoids in shake flasks are the highest yields yet reported from engineered microbes. Subsequently, production of 11-carbonyl-20β-hydroxy-Cuol by transient gene expression in tobacco resulted in yields of 1.28 mg/g dry weight in leaves. This work reveals the key genes involved in biosynthesis of prescription cucurbitacin IIa and demonstrates that engineered yeast cultivated with glucose can produce high yields of key triterpenoid intermediates. We describe a low-cost and highly efficient platform for rapid screening of candidate genes and high-yield production of pharmacological triterpenoids.

Diffusion-Based Generative Network for de Novo Synthetic Promoter Design

Computer-aided promoter design is a major development trend in synthetic promoter engineering. Various deep learning models have been used to evaluate or screen synthetic promoters, but there have been few works on de novo promoter design. To explore the potential ability of generative models in promoter design, we established a diffusion-based generative model for promoter design in Escherichia coli. The model was completely driven by sequence data and could study the essential characteristics of natural promoters, thus generating synthetic promoters similar to natural promoters in structure and component. We also improved the calculation method of FID indicator, using a convolution layer to extract the feature matrix of the promoter sequence instead. As a result, we got an FID equal to 1.37, which meant synthetic promoters have a distribution similar to that of natural ones. Our work provides a fresh approach to de novo promoter design, indicating that a completely data-driven generative model is feasible for promoter design.

Fine-Tuned Gene Expression Elements from Hybrid Promoter Libraries in Pichia pastoris

As a desirable microbial cell factory, Pichia pastoris has garnered extensive utilization in metabolic engineering. Nevertheless, the lack of fine-tuned gene expression components has significantly constrained the potential scope of applications. Here, a gradient strength promoter library was constructed by random hybridization and high-throughput screening. The hybrid promoter, phy47, performed best with 2.93-fold higher GFP expression levels than GAP. The broad applicability of the novel hybrid promoter variants in biotechnological production was further validated in the biosynthesis of pinene and rHuPH20 with higher titers. The upstream regulatory sequences (UASE and URSD) were identified and applied to promoters GAP and ENO1, resulting in a 34 and 43% increase and an 18 and 37% decrease in the expression level, respectively. Yeast one-hybrid analysis showed that transcription factor HAP2 activates the hybrid promoter through a direct interaction with the crucial regulatory region UASH. Furthermore, a short segment of tunable activation sequence (20 bp) was also screened, and artificial promoters were constructed in tandem with the addition of regulatory sequence, resulting in a 61% expansion of the expression range. This study provides a molecular tool and regulatory elements for further synthetic biology research in P. pastoris.

Quantitative analysis of transcription start site selection reveals control by DNA sequence, RNA polymerase II activity and NTP levels

Transcription start site (TSS) selection is a key step in gene expression and occurs at many promoter positions over a wide range of efficiencies. Here we develop a massively parallel reporter assay to quantitatively dissect contributions of promoter sequence, nucleoside triphosphate substrate levels and RNA polymerase II (Pol II) activity to TSS selection by 'promoter scanning' in Saccharomyces cerevisiae (Pol II MAssively Systematic Transcript End Readout, 'Pol II MASTER'). Using Pol II MASTER, we measure the efficiency of Pol II initiation at 1,000,000 individual TSS sequences in a defined promoter context. Pol II MASTER confirms proposed critical qualities of S. cerevisiae TSS -8, -1 and +1 positions, quantitatively, in a controlled promoter context. Pol II MASTER extends quantitative analysis to surrounding sequences and determines that they tune initiation over a wide range of efficiencies. These results enabled the development of a predictive model for initiation efficiency based on sequence. We show that genetic perturbation of Pol II catalytic activity alters initiation efficiency mostly independently of TSS sequence, but selectively modulates preference for the initiating nucleotide. Intriguingly, we find that Pol II initiation efficiency is directly sensitive to guanosine-5'-triphosphate levels at the first five transcript positions and to cytosine-5'-triphosphate and uridine-5'-triphosphate levels at the second position genome wide. These results suggest individual nucleoside triphosphate levels can have transcript-specific effects on initiation, representing a cryptic layer of potential regulation at the level of Pol II biochemical properties. The results establish Pol II MASTER as a method for quantitative dissection of transcription initiation in eukaryotes.

Hybrid Synthetic Promoters in Saccharomyces cerevisiae Built on Foreign Promoter Sequences

Traditionally, hybrid promoters are constructed, in Saccharomyces cerevisiae, by joining the core region and the upstream activating sequences from different native promoters. Here, we describe a new design that makes use of the core promoters from foreign organisms: viruses, humans, and the yeast Schizosaccharomyces pombe. With this approach, we realized a library of 59 new constitutive promoters that span over nine folds in gene expression.

Synthetic Promoter Design and Functional Evaluation in Saccharomyces cerevisiae

Saccharomyces cerevisiae has become a key microbial cell factory for producing biofuels, recombinant proteins, and natural products. The development of efficient cell factories relies on the precise control and fine-tuning of gene expression, underscoring the pivotal role of promoters in pathway engineering. However, natural promoters often have limited transcriptional capacity and thus fall short of the metabolic engineering requirements. This chapter provides protocols and guidelines for constructing and evaluating synthetic promoters in S. cerevisiae. Moreover, these protocols are applicable for creating and testing various synthetic promoters in other host systems.

Systematic sequence engineering enhances the induction strength of the glucose-regulated GTH1 promoter of Komagataella phaffii

The promoter of the high-affinity glucose transporter Gth1 (PGTH1) is tightly repressed on glucose and glycerol surplus, and strongly induced in glucose-limitation, thus enabling regulated methanol-free production processes in the yeast production host Komagataella phaffii. To further improve this promoter, an intertwined approach of nucleotide diversification through random and rational engineering was pursued. Random mutagenesis and fluorescence activated cell sorting of PGTH1 yielded five variants with enhanced induction strength. Reverse engineering of individual point mutations found in the improved variants identified two single point mutations with synergistic action. Sequential deletions revealed the key promoter segments for induction and repression properties, respectively. Combination of the single point mutations and the amplification of key promoter segments led to a library of novel promoter variants with up to 3-fold higher activity. Unexpectedly, the effect of gaining or losing a certain transcription factor binding site (TFBS) was highly dependent on its context within the promoter. Finally, the applicability of the novel promoter variants for biotechnological production was proven for the secretion of different recombinant model proteins in fed batch cultivation, where they clearly outperformed their ancestors. In addition to advancing the toolbox for recombinant protein production and metabolic engineering of K. phaffii, we discovered single nucleotide positions and correspondingly affected TFBS that distinguish between glycerol- and glucose-mediated repression of the native promoter.

Osh-dependent and -independent Regulation of PI4P Levels During Polarized Growth of Saccharomyces cerevisiae

Polarized secretion facilitates polarized cell growth. For a secretory vesicle to dock at the plasma membrane, it must mature with a progressive association or dissociation of molecules that are, respectively, necessary for or inhibitory to vesicle docking, including an exchange of Rab GTPases. In current models, oxysterol-binding protein homologue 4 (Osh4p) establishes a phosphatidylinositol 4-phosphate (PI4P) gradient along the secretory trafficking pathway such that vesicles have higher PI4P levels after budding from the trans-Golgi relative to when vesicles arrive at the plasma membrane. In this study, using the lipid-binding domain P4M and live-cell imaging, we show that secretory vesicle-associated PI4P levels remain constant when vesicles traffic from the trans-Golgi to the plasma membrane. We also show that deletion of OSH4 does not alter vesicle-associated PI4P levels, though loss of any individual member of the OSH family or complete loss of OSH family function alters the intracellular distribution of PI4P. We propose a model in which the Rab GTPases Ypt32p and Sec4p remain associated with a secretory vesicle during trafficking, independent of PI4P levels and Osh4p. Together these data indicate the necessity of experiments revealing the location and timing of events required for vesicle maturation.

Glucose Starvation Stimulates the Promoting Strength of a Novel Evolved Suc2 Promoter

Promoters are essential for designing Saccharomyces cerevisiae cell factories. Identifying novel promoters tuned to produce specific metabolites under increasingly diverse industrial stresses is required to improve the economic feasibility of whole fermentation processes. In this study, a positively evolved Suc2 promoter (SUC 2p) with promoter activity stronger than that of the wild-type Suc2 promoter (SUC 2wtp) was obtained. Quantitative real-time PCR, fluorescence analysis, Western blotting, and a β-galactosidase activity assay revealed that SUC 2p is a medium-strength promoter compared with eight reported promoters at a medium glucose concentration (2% (w/v)). Different glucose concentrations modulated the strength of SUC 2p. Low glucose concentrations (0.05 and 0.5% (w/v)) enhanced the promoter strength of SUC 2p dramatically, with promoter activity higher than that of reported strong promoters. Glucose starvation resulted in the formation of a new Msn2/4 binding site on SUC 2p. Our work should facilitate the development of promoters with novel fine-tuning properties and the construction of S. cerevisiae cell factories suitable for the industrial production of essential chemicals under glucose-deprived conditions.

Promoters and introns as key drivers for enhanced gene expression in Saccharomyces cerevisiae

The transcription of genes in the yeast Saccharomyces cerevisiae is governed by multiple layers of regulatory elements and proteins, cooperating to ensure optimum expression of the final protein product based on the cellular requirements. Promoters have always been regarded as the most important determinant of gene transcription, but introns also play a key role in the expression of intron-encoding genes. Some introns can enhance transcription when introduced either promoter-proximal or embedded in the open reading frame of genes. However, the outcome is seldom predictable, with some introns increasing or decreasing transcription depending on the promoter and reporter gene employed. This chapter provides an overview of the general structure and function of promoters and introns and how they may cooperate during transcription to allow intron-mediated enhancement of gene expression. Since S. cerevisiae is a suitable host for recombinant protein production on a commercial level, stronger and more controllable promoters are in high demand. Enhanced gene expression can be achieved via promoter engineering, which may include introns that increase the efficacy of recombinant expression cassettes. Different models for the role of introns in transcription are briefly discussed to show how these intervening sequences can actively interact with the transcription machinery. Furthermore, recent examples of improved protein production via the introduction of promoter-proximal introns are highlighted to showcase the potential value of intron-mediated enhancement of gene expression.

Pullulanase: unleashing the power of enzyme with a promising future in the food industry

Pullulanases are the most important industrial group of enzymes in family 13 glycosyl hydrolases. They hydrolyze either α-1,6 and α-1,4 or both glycosidic bonds in pullulan as well as other carbohydrates to produce glucose, maltose, and maltotriose syrups, which have important uses in food and other related sectors. However, very less reports are available on pullulanase production from native strains because of low yield issues. In line with the increasing demands for pullulanase, it has become important to search for novel pullulanase-producing microorganisms with high yields. Moreover, high production costs and low yield are major limitations in the industrial production of pullulanase enzymes. The production cost of pullulanase by using the solid-state fermentation (SSF) process can be minimized by selecting agro-industrial waste. This review summarizes the types, sources, production strategies, and potential applications of pullulanase in different food and other related industries. Researchers should focus on fungal strains producing pullulanase for better yield and low production costs by using agro-waste. It will prove a better enzyme in different food processing industries and will surely reduce the cost of products.

Reconstruction of engineered yeast factory for high yield production of ginsenosides Rg3 and Rd

Panax notoginseng is one of the most valuable traditional Chinese herbs. The main active ingredients, dammarane-type ginsenosides, show multiple pharmacological activities. Recently, the key UDP-dependent glycosyltransferases (UGTs) involved in the biosynthesis of common ginsenosides have been widely studied. However, only a few UGTs that catalyze ginsenoside formation have been reported. This study further investigated the new catalytic function of 10 characterized UGTs from the public database. PnUGT31(PnUGT94B2) and PnUGT53 (PnUGT71B8)exhibited promiscuous sugar-donor specificity of UDP-glucose and UDP-xylose, which could catalyze the glycosylation of C20-OH sites and elongation of the sugar chain at the C3 and/or C20 sites. We further analyzed the expression patterns in P. notoginseng and predicted the catalytic mechanisms of PnUGT31 and PnUGT53 using molecular docking simulations. Moreover, different gene modules were built to increase the yield of ginsenosides in engineered yeast. The metabolic flow of the proginsenediol (PPD) synthetic pathway was enhanced by LPPDS gene modules based on the engineered strain. The resulting yeast was constructed to produce 1.72 g/L PPD in a shaking flask, but cell growth was significantly inhibited. EGH and LKG gene modules were constructed to achieve high-level production of dammarane-type ginsenosides. The production of G-Rg3 controlled by LKG modules increased 3.84 times (254.07 mg/ L), whereas the G-Rd titer reached 56.68 mg/L after 96 h in shaking flask culture under the control of all modules, both of which yielded the highest values for known microbes.

Engineering an Efficient Expression Using Heterologous GAL Promoters and Transcriptional Activators in Saccharomyces cerevisiae

Galactose-inducible (GAL) promoters have been widely used in metabolic engineering in Saccharomyces cerevisiae for production of valuable products. Endogenous GAL promoters and GAL transcription factors have often been engineered to improve GAL promoter activities. Heterologous GAL promoters and GAL activator (Gal4p-like transcriptional activators), although existing in other yeasts or fungi, have not been well explored. In this study, we comprehensively characterized the activation effects of Gal4p activators from different yeasts or fungi on a variant of GAL promoters. Overexpressing endogenous Gal4p driven by PHHF1 increased the activities of native PGAL1 and heterologous PSkGAL2 by 131.20% and 72.45%, respectively. Furthermore, eight transcriptional activators from different organisms were characterized and most of them exhibited functions that were consistent with ScGal4p. Expression of KlLac9p from Kluyveromyces lactis further increased the activity of PScGAL1 and PSkGAL2 by 41.56% and 100.63%, respectively, compared to ScGal4p expression, and was able to evade Gal80p inhibition. This optimized GAL expression system can be used to increase the production of β-carotene by 9.02-fold in S. cerevisiae. Our study demonstrated that a combination of heterologous transcriptional activators and GAL promoters provided novel insights into the optimization of the GAL expression system.

Optimization of Constitutive Promoters Using a Promoter-Trapping Vector in Burkholderia pyrrocinia JK-SH007

Selecting suitable promoters to drive gene overexpression can provide significant insight into the development of engineered bacteria. In this study, we analyzed the transcriptome data of Burkholderia pyrrocinia JK-SH007 and identified 54 highly expressed genes. The promoter sequences were located using genome-wide data and scored using the prokaryotic promoter prediction software BPROM to further screen out 18 promoter sequences. We also developed a promoter trap system based on two reporter proteins adapted for promoter optimization in B. pyrrocinia JK-SH007: firefly luciferase encoded by the luciferase gene set (Luc) and trimethoprim (TP)-resistant dihydrofolate reductase (TP^r). Ultimately, eight constitutive promoters were successfully inserted into the probe vector and transformed into B. pyrrocinia JK-SH007. The transformants were successfully grown on Tp antibiotic plates, and firefly luciferase expression was determined by measuring the relative light unit (RLU). Five of the promoters (P4, P9, P10, P14, and P19) showed 1.01-2.51-fold higher activity than the control promoter λ phage transcriptional promoter (PRPL). The promoter activity was further validated via qPCR analysis, indicating that promoters P14 and P19 showed stable high transcription levels at all time points. Then, GFP and RFP proteins were overexpressed in JK-SH007. In addition, promoters P14 and P19 were successfully used to drive gene expression in Burkholderia multivorans WS-FJ9 and Escherichia coli S17-1. The two constitutive promoters can be used not only in B. pyrrocinia JK-SH007 itself to gene overexpression but also to expand the scope of application.

Biosynthesis of cannabigerol and cannabigerolic acid: the gateways to further cannabinoid production

Cannabinoids are a therapeutically valuable class of secondary metabolites with a vast number of substituents. The native cannabinoid biosynthetic pathway of Cannabis sativa generates cannabigerolic acid (CBGA), the common substrate to multiple cannabinoid synthases. The bioactive decarboxylated analog of this compound, cannabigerol (CBG), represents an alternate gateway into the cannabinoid space as a substrate either to non-canonical cannabinoid synthase homologs or to synthetic chemical reactions. Herein, we describe the identification and repurposing of aromatic prenyltransferase (AtaPT), which when coupled with native enzymes of C. sativa can form an Escherichia coli production system for CBGA in cell lysates and CBG in whole cells. Engineering of AtaPT, guided by structural analysis, was performed to enhance its kinetics toward CBGA production for subsequent use in a proof-of-concept lysate system. For the first time, we show a synthetic biology platform for CBG biosynthesis in E. coli cells by employing AtaPT under an optimized microbial system. Our results have therefore set the foundation for sustainable production of well-researched and rarer cannabinoids in an E. coli chassis. Graphical Abstract.

Overexpression of genes by stress-responsive promoters increases protein secretion in Saccharomyces cerevisiae

Recombinant proteins produced by cell factories are now widely used in various fields. Many efforts have been made to improve the secretion capacity of cell factories to meet the increasing demand for recombinant proteins. Recombinant protein production usually causes cell stress in the endoplasmic reticulum (ER). The overexpression of key genes possibly removes limitations in protein secretion. However, inappropriate gene expression may have negative effects. There is a need for dynamic control of genes adapted to cellular status. In this study, we constructed and characterized synthetic promoters that were inducible under ER stress conditions in Saccharomyces cerevisiae. The unfolded protein response element UPRE2, responding to stress with a wide dynamic range, was assembled with various promoter core regions, resulting in UPR-responsive promoters. Synthetic responsive promoters regulated gene expression by responding to stress level, which reflected the cellular status. The engineered strain using synthetic responsive promoters P_{4UPRE2 - TDH3} and P_{4UPRE2 - TEF1} for co-expression of ERO1 and SLY1 had 95% higher α-amylase production compared with the strain using the native promoters P_TDH3 and P_TEF1. This work showed that UPR-responsive promoters were useful in the metabolic engineering of yeast strains for tuning genes to support efficient protein production.

Improving expression and assembly of difficult-to-express heterologous proteins in Saccharomyces cerevisiae by culturing at a sub-physiological temperature

BACKGROUND

Escherichia coli heat labile toxin B subunit (LTB) is one of the most popular oral vaccine adjuvants and intestine adsorption enhancers. It is often expressed as a fusion partner with target antigens to enhance their immunogenicity as well as gut absorbability. However, high expression levels of a fusion protein are critical to the outcome of immunization experiments and the success of subsequent vaccine development efforts. In order to improve the expression and functional assembly of LTB-fusion proteins using Saccharomyces cerevisiae, we compared their expression under culture conditions at a sub-physiological temperature 20 °C with their expression under a standard 30 °C.

RESULTS

The assembled expression of LTB-EDIII₂ (LTB fused to the envelope domain III (EDIII) of Dengue virus serotype 2), which was expressed at the level of 20 µg/L in our previous study, was higher when the expression temperature was 20 °C as opposed to 30 °C. We also tested whether the expression and functional assembly of a difficult-to-express LTB fusion protein could be increased. The assembled expression of the difficult-to-express LTB-VP1 fusion protein (LTB fused to VP1 antigen of Foot-and-Mouth Disease Virus) dramatically increased, although the total amount of expressed protein was still lower than that of LTB-EDIII₂. Slight but significant increase in the expression of well-known reporter protein eGFP, which has previously been shown to be increased by cultivation at 20 °C, was also observed in our expression system. As no significant changes in corresponding transcripts levels and cell growth were observed between 20 °C and 30 °C, we infer that translation and post-translational assembly are responsible for these enhancements.

CONCLUSIONS

The effects of lowering the expression temperature from 30 °C to 20 °C on protein expression and folding levels in S. cerevisiae, using several proteins as models, are reported. When heterologous proteins are expressed at 20 °C, a greater amount of (specially, more assembled) functional proteins accumulated than at 30 °C. Although further studies are required to understand the molecular mechanisms, our results suggest that lowering the expression temperature is a convenient strategy for improving the expression of relatively complexly structured and difficult-to-express proteins in S. cerevisiae.

Design of Four Small-Molecule-Inducible Systems in the Yeast Chromosome, Applied to Optimize Terpene Biosynthesis

The optimization of cellular functions often requires the balancing of gene expression, but the physical construction and screening of alternative designs are costly and time-consuming. Here, we construct a strain of Saccharomyces cerevisiae that contains a "sensor array" containing bacterial regulators that respond to four small-molecule inducers (vanillic acid, xylose, aTc, IPTG). Four promoters can be independently controlled with low background and a 40- to 5000-fold dynamic range. These systems can be used to study the impact of changing the level and timing of gene expression without requiring the construction of multiple strains. We apply this approach to the optimization of a four-gene heterologous pathway to the terpene linalool, which is a flavor and precursor to energetic materials. Using this approach, we identify bottlenecks in the metabolic pathway. This work can aid the rapid automated strain development of yeasts for the bio-manufacturing of diverse products, including chemicals, materials, fuels, and food ingredients.

Stepwise Optimization of Inducible Expression System for the Functional Secretion of Horseradish Peroxidase in Saccharomyces cerevisiae

Horseradish peroxidase (HRP) is a plant-derived glycoprotein that can be developed as a food additive to cross-link proteins or biopolymers. Although Saccharomyces cerevisiae has advantages in the production of food-grade HRP, the low expressional level and inefficient secretion hindered its application values. After comparing the effects of constitutive and inducible expression on cell growth, the strength of HRP expression was roughly tuned by replacing core regions of the promoter in the GAL80-knockout strain and further finely tuned by terminator screening. Additionally, the most suitable signal peptide was selected, and the pre-peptide with pro-peptides was modified to balance the transport of HRP in the endoplasmic reticulum. The extracellular HRP activity of the best strain reached 13 506 U/L at the fermenter level, 330-fold higher than the previous result of 41 U/L in S. cerevisiae. The strategy can be applied to alleviate the inhibition of cell growth caused by the expression of toxic proteins and improve their secretion.

Logic Circuits Based on 2A Peptide Sequences in the Yeast Saccharomyces cerevisiae

Gene digital circuits are the subject of many studies in Synthetic Biology due to their various applications from pollutant detection to medical diagnostics and biocomputing. Complex logic functions are calculated via small genetic components that mimic Boolean gates, i.e., they implement basic logic operations. Gates interact by exchanging proteins or noncoding RNAs. To carry out logic operations in the yeast Saccharomyces cerevisiae, we chose three bacterial repressors commonly used for proofs of concept in Synthetic Biology, namely, TetR, LexA, and LacI. We coexpressed them via synthetic polycistronic cassettes based on 2A peptide sequences. Our initial results highlighted the successful application of four 2A peptides─from Equine rhinitis B virus-1 (ERBV-1 2A), Operophtera brumata cypovirus 18 (OpbuCPV18 2A), Ljungan virus (LV2A), and Thosea asigna virus (T2A)─to the construction of single and two-input Boolean gates. In order to improve protein coexpression, we modified the original 2A peptides with the addition of the glycine-serine-glycine (GSG) prefix or by using two different 2As sequences in tandem. Remarkably, we finally realized a well-working tri-cistronic vector that carried LexA-HBD(hER), TetR, and LacI separated, in the order, by GSG-T2A and ERBV-1 2A. This plasmid led to the implementation of three-input circuits containing AND and OR gates. Taken together, polycistronic constructs simplify the cloning and coexpression of multiple proteins with a dramatic reduction in the complexity of gene digital circuits.

Bidirectional hybrid erythritol-inducible promoter for synthetic biology in Yarrowia lipolytica

BACKGROUND

The oleaginous yeast Yarrowia lipolytica is increasingly used as a chassis strain for generating bioproducts. Several hybrid promoters with different strengths have been developed by combining multiple copies of an upstream activating sequence (UAS) associated with a TATA box and a core promoter. These promoters display either constitutive, phase-dependent, or inducible strong expression. However, there remains a lack of bidirectional inducible promoters for co-expressing genes in Y. lipolytica.

RESULTS

This study built on our previous work isolating and characterizing the UAS of the erythritol-induced genes EYK1 and EYD1 (UAS-eyk1). We found an erythritol-inducible bidirectional promoter (BDP) located in the EYK1-EYL1 intergenic region. We used the BDP to co-produce YFP and RedStarII fluorescent proteins and demonstrated that the promoter's strength was 2.7 to 3.5-fold stronger in the EYL1 orientation compared to the EYK1 orientation. We developed a hybrid erythritol-inducible bidirectional promoter (HBDP) containing five copies of UAS-eyk1 in both orientations. It led to expression levels 8.6 to 19.2-fold higher than the native bidirectional promoter. While the BDP had a twofold-lower expression level than the strong constitutive TEF promoter, the HBDP had a 5.0-fold higher expression level when oriented toward EYL1 and a 2.4-fold higher expression level when oriented toward EYK1. We identified the optimal media for BDP usage by exploring yeast growth under microbioreactor conditions. Additionally, we constructed novel Golden Gate biobricks and a destination vector for general use.

CONCLUSIONS

In this research, we developed novel bidirectional and hybrid bidirectional promoters of which expression can be fine-tuned, responding to the need for versatile promoters in the yeast Y. lipolytica. This study provides effective tools that can be employed to smoothly adjust the erythritol-inducible co-expression of two target genes in biotechnology applications. BDPs developed in this study have potential applications in the fields of heterologous protein production, metabolic engineering, and synthetic biology.

Natural promoters and promoter engineering strategies for metabolic regulation in Saccharomyces cerevisiae

Sharomyces cerevisiae is currently one of the most important foreign gene expression systems. S. cerevisiae is an excellent host for high-value metabolite cell factories due to its advantages of simplicity, safety, and nontoxicity. A promoter, as one of the basic elements of gene transcription, plays an important role in regulating gene expression and optimizing metabolic pathways. Promoters control the direction and intensity of transcription, and the application of promoters with different intensities and performances will largely determine the effect of gene expression and ultimately affect the experimental results. Due to its significant role, there have been many studies on promoters for decades. While some studies have explored and analyzed new promoters with different functions, more studies have focused on artificially modifying promoters to meet their own scientific needs. Thus, this article reviews current research on promoter engineering techniques and related natural promoters in S. cerevisiae. First, we introduce the basic structure of promoters and the classification of natural promoters. Then, the classification of various promoter strategies is reviewed. Finally, by grouping related articles together using various strategies, this review anticipates the future development direction of promoter engineering.

Promoter-proximal introns impact recombinant amylase expression in Saccharomyces cerevisiae

Consolidated bioprocessing (CBP) of starch requires recombinant Saccharomyces cerevisiae strains that produce raw starch-degrading enzymes and ferment the resultant sugars to ethanol in a single step. In this study, the native S. cerevisiae COX4 and RPS25A promoter-proximal introns were evaluated for enhanced expression of amylase genes (ateA, temA or temG_Opt) under the control of an S. cerevisiae promoter (ENO1P, TEF1P, TDH3P, or HXT7P). The results showed that different promoters and promoter-intron combinations differentially affected recombinant amylase production: ENO1P-COX4i and TDH3P-RPS25Ai were the best promoters for AteA, followed closely by HXT7P. The latter was also the best promoter for TemA and TemG production, followed closely by TDH3P-RPS25Ai for both these enzymes. Introducing promoter-proximal introns increased amylase activity up to 62% in Y294[ENO-COX-AteA] and Y294[TDH3-RPS-TemA], a significant improvement relative to the intron-less promoters. Strains co-expressing both an α-amylase and glucoamylase genes yielded up to 56 g/L ethanol from 20% w/v raw starch, with a higher carbon conversion observed with strains co-expressing TDH3P-RPS25Ai-temG_Opt than HXT7P-temG_Opt. The study showed that promoter-proximal introns can enhance amylase activity in S. cerevisiae and suggest that these alternative cassettes may also be considered for expression in more efficient ethanol-producing industrial yeast strains for raw starch CBP.

Spatial-temporal regulation of fatty alcohol biosynthesis in yeast

BACKGROUND

Construction of efficient microbial cell factories is one of the core steps for establishing green bio-manufacturing processes. However, the complex metabolic regulation makes it challenging in driving the metabolic flux toward the product biosynthesis. Dynamically coupling the biosynthetic pathways with the cellular metabolism at spatial-temporal manner should be helpful for improving the production with alleviating the cellular stresses.

RESULTS

In this study, we observed the mismatch between fatty alcohol biosynthesis and cellular metabolism, which compromised the fatty alcohol production in Saccharomyces cerevisiae. To enhance the fatty alcohol production, we spatial-temporally regulated fatty alcohol biosynthetic pathway by peroxisomal compartmentalization (spatial) and dynamic regulation of gene expression (temporal). In particular, fatty acid/acyl-CoA responsive promoters were identified by comparative transcriptional analysis, which helped to dynamically regulate the expression of acyl-CoA reductase gene MaFAR1 and improved fatty alcohol biosynthesis by 1.62-fold. Furthermore, enhancing the peroxisomal supply of acyl-CoA and NADPH further improved fatty alcohol production to 282 mg/L, 2.52 times higher than the starting strain.

CONCLUSIONS

This spatial-temporal regulation strategy partially coordinated fatty alcohol biosynthesis with cellular metabolism including peroxisome biogenesis and precursor supply, which should be applied for production of other products in microbes.

Transcription regulation strategies in methylotrophs: progress and challenges

As a promising industrial microorganism, methylotroph is capable of using methane or methanol as the sole carbon source natively, which has been utilized in the biosynthesis of various bioproducts. However, the relatively low efficiency of carbon conversion has become a limiting factor throughout the development of methanotrophic cell factories due to the unclear genetic background. To better highlight their advantages in methane or methanol-based biomanufacturing, some metabolic engineering strategies, including upstream transcription regulation projects, are being popularized in methylotrophs. In this review, several strategies of transcription regulations applied in methylotrophs are summarized and their applications are discussed and prospected.

Construction and Optimization of Malonyl-CoA Sensors in Saccharomyces cerevisiae by Combining Promoter Engineering Strategies

Biosensors can be used for high-throughput screening, real-time monitoring of metabolites, and dynamic regulation of metabolic processes, which have been a popular research direction in recent years. Here, five promoters from Saccharomyces cerevisiae were selected to construct Malonyl-CoA sensors with the fapO/fapR system derived from Bacillus subtilis, and pCCW12 was finally selected for further optimization. Based on pCCW12, a series of sensors with different response sensitivities were obtained by selecting different fapO insertion sites and combining the best two or three of them. Then, through a combination of promoter hybrid, intron insertion, and transcription factor modification strategies, we obtained sensors with different effects, one of which, the H-pCCW12(TFBS)-Cti6~fapR sensor, had the lowest background noise, doubled response range and higher response sensitivity compared to the original sensor. Sensors with different characteristics constructed in this study, can be applied to Malonyl-CoA related high-throughput screening and finer regulation of metabolism. It also proves that the combined application of different promoter engineering strategies is a feasible idea for the precise construction and regulation of biosensors.

A New Expression System Based on Psychrotolerant Debaryomyces macquariensis Yeast and Its Application to the Production of Cold-Active β-d-Galactosidase from Paracoccus sp. 32d

Yeasts provide attractive host/vector systems for heterologous gene expression. The currently used yeast-based expression platforms include mesophilic and thermotolerant species. A eukaryotic expression system working at low temperatures could be particularly useful for the production of thermolabile proteins and proteins that tend to form insoluble aggregates. For this purpose, an expression system based on an Antarctic psychrotolerant yeast Debaryomyces macquariensis strain D50 that is capable of growing at temperatures ranging from 0 to 30 °C has been developed. The optimal physical culture conditions for D. macquariensis D50 in a fermenter are as follows: temperature 20 °C, pH 5.5, aeration rate of 1.5 vvm, and a stirring speed of 300 rpm. Four integrative plasmid vectors equipped with an expression cassette containing the constitutive GAP promoter and CYC1 transcriptional terminator from D. macquariensis D50 were constructed and used to clone and express a gene-encoding cold-active β-d-galactosidase of Paracoccus sp. 32d. The yield was 1150 U/L of recombinant yeast culture. Recombinant D. macquariensis D50 strains were mitotically stable under both selective and non-selective conditions. The D. macquariensis D50 host/vector system has been successfully utilized for the synthesis of heterologous thermolabile protein, and it can be an alternative to other microbial expression systems.

Applicability of the heterologous yeast promoters for recombinant protein production in Pichia pastoris

Promoter choice is an important step in recombinant protein production, which directly determines the expression manner as constitutive or inducible and the expression level of the recombinant protein. This study aims to investigate the applicability of heterologous yeast promoters (Kluyveromyces marxianus TPI, Hansenula polymorpha PMA, Candida tropicalis ICL, and Saccharomyces cerevisiae CUP) in Pichia pastoris. The regulation mode of the CtICL and ScCUP promoters in P. pastoris was found to be inducible and that of the KmTPI and HpPMA was constitutive. The carbon sources in which the promoters exhibited the highest activity were determined as glycerol for PMA and TPI, glucose for CUP, and ethanol for ICL. The DNA region showing the highest activity was determined as 1000 bp for all promoters by promoter deletion analysis. Results from the study demonstrate the potential of inducible and constitutive heterologous promoters allowing expression under different conditions in the P. pastoris expression system and offers alternatives to frequently used promoters. KEY POINTS: • Heterologous promoters exhibited similar expression pattern in P. pastoris with its native host. • HpPMA has the highest promoter activity among the heterologous promoters tested. • Reporter gene expression with ScCUP is responsive to elevating Cu²⁺in P. pastoris.

OverFlap PCR: A reliable approach for generating plasmid DNA libraries containing random sequences without a template bias

Over the decades, practical biotechnology researchers have aimed to improve naturally occurring proteins and create novel ones. It is widely recognized that coupling protein sequence randomization with various effect screening methodologies is one of the most powerful techniques for quickly, efficiently, and purposefully acquiring these desired improvements. Over the years, considerable advancements have been made in this field. However, developing PCR-based or template-guided methodologies has been hampered by resultant template sequence biases. Here, we present a novel whole plasmid amplification-based approach, which we named OverFlap PCR, for randomizing virtually any region of plasmid DNA without introducing a template sequence bias.

Metabolic Engineering of Shikimic Acid Biosynthesis Pathway for the Production of Shikimic Acid and Its Branched Products in Microorganisms: Advances and Prospects

The shikimate pathway is a necessary pathway for the synthesis of aromatic compounds. The intermediate products of the shikimate pathway and its branching pathway have promising properties in many fields, especially in the pharmaceutical industry. Many important compounds, such as shikimic acid, quinic acid, chlorogenic acid, gallic acid, pyrogallol, catechol and so on, can be synthesized by the shikimate pathway. Among them, shikimic acid is the key raw material for the synthesis of GS4104 (Tamiflu^®), an inhibitor of neuraminidase against avian influenza virus. Quininic acid is an important intermediate for synthesis of a variety of raw chemical materials and drugs. Gallic acid and catechol receive widespread attention as pharmaceutical intermediates. It is one of the hotspots to accumulate many kinds of target products by rationally modifying the shikimate pathway and its branches in recombinant strains by means of metabolic engineering. This review considers the effects of classical metabolic engineering methods, such as central carbon metabolism (CCM) pathway modification, key enzyme gene modification, blocking the downstream pathway on the shikimate pathway, as well as several expansion pathways and metabolic engineering strategies of the shikimate pathway, and expounds the synthetic biology in recent years in the application of the shikimate pathway and the future development direction.

Tuning Geraniol Biosynthesis via a Novel Decane-Responsive Promoter in Candida glycerinogenes

Geraniol is a rose-scented monoterpene with significant commercial and industrial value in medicine, condiments, cosmetics, and bioenergy. Here, we first targeted geraniol as a reporter metabolite and explored the suitability and potential of Candida glycerinogenes as a heterologous host for monoterpenoid production. Subsequently, dual-pathway engineering was employed to improve the production of geraniol with a geraniol titer of 858.4 mg/L. We then applied a synthetic hybrid promoter approach to develop a decane-responsive hybrid promoter based on the native promoter P_GAP derived from C. glycerinogenes itself. The hybrid promoter was able to be induced by n-decane with 3.6 times higher transcriptional intensity than the natural promoter P_GAP. In particular, the hybrid promoter effectively reduces the conflict between cell growth and product formation in the production of geraniol. Ultimately, 1194.6 mg/L geraniol was obtained at the shake flask level. The strong and tunable decane-responsive hybrid promoter developed in this study provides an important tool for fine regulation of toxic terpenoid production in cells.

Redesigning regulatory components of quorum-sensing system for diverse metabolic control

Quorum sensing (QS) is a ubiquitous cell–cell communication mechanism that can be employed to autonomously and dynamically control metabolic fluxes. However, since the functions of genetic components in the circuits are not fully understood, the developed QS circuits are still less sophisticated for regulating multiple sets of genes or operons in metabolic engineering applications. Here, we discover the regulatory roles of a CRP-binding site and the lux box to −10 region within luxR-luxI intergenic sequence in controlling the lux-type QS promoters. By varying the numbers of the CRP-binding site and redesigning the lux box to −10 site sequence, we create a library of QS variants that possess both high dynamic ranges and low leakiness. These circuits are successfully applied to achieve diverse metabolic control in salicylic acid and 4-hydroxycoumarin biosynthetic pathways in Escherichia coli. This work expands the toolbox for dynamic control of multiple metabolic fluxes under complex metabolic background and presents paradigms to engineer metabolic pathways for high-level synthesis of target products.

Existing quorum sensing (QS) circuits are less sophisticated for regulating multiple sets of genes or operons. Here, the authors redesign the luxR-luxI intergenic sequence of the lux-type QS system and apply it to achieve diverse metabolic control in salicylic acid and 4-hydroxycoumarin biosynthesis in E. coli.

PASIV: A Pooled Approach-Based Workflow to Overcome Toxicity-Induced Design of Experiments Failures and Inefficiencies

We present here a newly developed workflow—which we have called PASIV—designed to provide a solution to a practical problem with design of experiments (DoE) methodology: i.e., what can be done if the scoping phase of the DoE cycle is severely hampered by burden and toxicity issues (caused by either the metabolite or an intermediary), making it unreliable or impossible to proceed to the screening phase? PASIV—standing for pooled approach, screening, identification, and visualization—was designed so the (viable) region of interest can be made to appear through an interplay between biology and software. This was achieved by combining multiplex construction in a pooled approach (one-pot reaction) with a viability assay and with a range of bioinformatics tools (including a novel construct matching tool). PASIV was tested on the exemplar of the lycopene pathway—under stressful constitutive expression—yielding a region of interest with comparatively stronger producers.

Programmable Synthetic Upstream Activating Sequence Library for Fine-Tuning Gene Expression Levels in Saccharomyces cerevisiae

A wide dynamic range of promoters is necessary for fine-tuning transcription levels. However, weak intensity and narrow dynamic range limit transcriptional regulation via constitutive promoters. The upstream activation sequence (UAS) located upstream of the core promoter is a crucial region that could obviously enhance promoter strength. Herein, we created a random mutagenesis library consisting of 330 different variants based on the UAS of the TDH3 promoter with an ∼37-fold dynamic range by error-prone polymerase chain reaction (PCR) and obtained strong intensity mutant UAS, which was ∼12-fold greater than the wild-type UAS_TDH3. Analysis of the mutant library revealed 15 strength-enhancing sites and their corresponding bases of the UAS_TDH3 regions, which provided the impetus for a synthetic library. The resulting 32 768 mutant UAS library was constructed by permutation and combination of the bases of the 15 enhancing sites. To characterize the library, a strength prediction model was built by correlating DNA structural features and UAS strength, which provided a model between UAS sequence and intensity. Following characterization, the UAS library was applied to precisely regulate gene expression in the production of β-carotene, proving that the UAS library would be a useful tool for gene tuning in metabolic engineering. In summary, we designed, constructed, and characterized a UAS library that facilitated precise tuning of transcription levels of target proteins.

Genetic effect of an InDel in the promoter region of the NUDT15 and its effect on myoblast proliferation in chickens

Background

Molecular breeding accelerates the speed of animal breeding. Screening molecular markers that can affect economic traits through genome-wide association studies (GWAS) can provide a theoretical basis for molecular breeding. At present, a large number of molecular markers have been screened in poultry research, but few reports on how molecular markers affect economic traits exist. It is particularly important to reveal the action mechanisms of molecular markers, which can provide more accurate information for molecular breeding.

Results

The aim of this study was to investigate the relationships between two indels (NUDT15-indel-2777 and NUDT15-indel-1673) in the promoter region of NUDT15 and growth and carcass traits in chickens and to explore the regulatory mechanism of NUDT15. Significant differences were found in genotype and allele frequencies among commercial broilers, commercial laying hens and dual-purpose chickens. The results of association analyses showed that these two indel loci could significantly affect growth traits, such as body weight, and carcass traits. Tissue expression profiling at E12 showed that the expression of NUDT15 was significantly higher in skeletal muscle, and time-expression profiling of leg muscle showed that the expression of NUDT15 in myoblasts was significantly higher in the E10 and E12 proliferation stages than in other stages. Promoter activity analysis showed that pro-1673-I and pro-1673-D significantly inhibited promoter activity, and the promoter activity of pro-1673-D was significantly lower than that of pro-1673-I. In addition, when NUDT15 was overexpressed or underwent interference in chicken primary myoblasts (CPMs), NUDT15 could inhibit the proliferation of CPMs.

Conclusion

The results suggest that the studied indels in the promoter region of NUDT15 may regulate the proliferation of CPMs by affecting NUDT15 expression, ultimately affecting the growth and carcass traits of chickens. These indel polymorphisms may be used together as molecular markers for improving economic traits in chickens.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-022-08362-6.

Highly efficient rDNA ‐mediated multicopy integration based on the dynamic balance of rDNA in Saccharomyces cerevisiae

Engineered Saccharomyces cerevisiae strains are good cell factories, and developing additional genetic manipulation tools will accelerate construction of metabolically engineered strains. Highly repetitive rDNA sequence is one of two main sites typically used for multicopy integration of genes. Here, we developed a simple and high‐efficiency strategy for rDNA‐mediated multicopy gene integration based on the dynamic balance of rDNA in S. cerevisiae. rDNA copy number was decreased by pre‐treatment with hydroxyurea (HU). Then, heterologous genes were integrated into the rDNA sequence. The copy number of the integrated heterologous genes increased along with restoration of the copy number of rDNA. Our results demonstrated that HU pre‐treatment doubled the number of integrated gene copies; moreover, compared with removing HU stress during transformation, removing HU stress after selection of transformants had a higher probability of resulting in transformants with high‐copy integrated genes. Finally, we integrated 18.0 copies of the xylose isomerase gene into the S. cerevisiae genome in a single step. This novel rDNA‐mediated multicopy genome integration strategy provides a convenient and efficient tool for further metabolic engineering of S. cerevisiae.

Removing the Bottleneck: Introducing cMatch - A Lightweight Tool for Construct-Matching in Synthetic Biology

We present a software tool, called cMatch, to reconstruct and identify synthetic genetic constructs from their sequences, or a set of sub-sequences—based on two practical pieces of information: their modular structure, and libraries of components. Although developed for combinatorial pathway engineering problems and addressing their quality control (QC) bottleneck, cMatch is not restricted to these applications. QC takes place post assembly, transformation and growth. It has a simple goal, to verify that the genetic material contained in a cell matches what was intended to be built - and when it is not the case, to locate the discrepancies and estimate their severity. In terms of reproducibility/reliability, the QC step is crucial. Failure at this step requires repetition of the construction and/or sequencing steps. When performed manually or semi-manually QC is an extremely time-consuming, error prone process, which scales very poorly with the number of constructs and their complexity. To make QC frictionless and more reliable, cMatch performs an operation we have called “construct-matching” and automates it. Construct-matching is more thorough than simple sequence-matching, as it matches at the functional level-and quantifies the matching at the individual component level and across the whole construct. Two algorithms (called CM_1 and CM_2) are presented. They differ according to the nature of their inputs. CM_1 is the core algorithm for construct-matching and is to be used when input sequences are long enough to cover constructs in their entirety (e.g., obtained with methods such as next generation sequencing). CM_2 is an extension designed to deal with shorter data (e.g., obtained with Sanger sequencing), and that need recombining. Both algorithms are shown to yield accurate construct-matching in a few minutes (even on hardware with limited processing power), together with a set of metrics that can be used to improve the robustness of the decision-making process. To ensure reliability and reproducibility, cMatch builds on the highly validated pairwise-matching Smith-Waterman algorithm. All the tests presented have been conducted on synthetic data for challenging, yet realistic constructs - and on real data gathered during studies on a metabolic engineering example (lycopene production).