An Expeditious Synthesis of Near-Infrared-Absorbing Imide-Based Graphene Nanoribbons and Their Photothermal Properties

Graphene nanoribbons (GNRs) with low band gap and strong near-infrared (NIR) absorption are potential candidates for optoelectronic and biomedical applications. In this context, imide-based GNRs are promising, but there are no rational design principles that yield these robust GNRs with strong NIR absorption. Here, we demonstrate a rational synthesis route to achieve NIR-absorbing imide-based robust GNRs by exploring the bay region of polyperylene (PP). Using the oxidative Diels-Alder reaction, we have successfully introduced mono and diimide functional groups on PP. After cyclodehydrogenation, the resultant GNRs, benzoperylene imide GNR (BPI-GNR) and coronene diimide GNR (CDI-GNR), show oscillatory edge geometry with strong NIR absorption (up to 1000 nm) and optical band gap of ~1.3 eV. Computational studies also indicate that imide substituents play an important role in fine-tuning the optoelectronic properties of GNRs. Moreover, these GNRs are solution-processable and can be made into thin films via spray coating. Owing to the strong NIR absorption and imide substitutions, BPI and CDI-GNRs show good photothermal conversion with excellent cyclic stability.

Review of research of nanocomposites based on graphene quantum dots

Graphene quantum dots (GQDs) belong to the vast and versatile family of carbon nanomaterials. Their unique position amongst versatile carbon nanoparticles (NPs) originates from the properties of quantum confinement and edge effects. GQDs are similar to conventional semiconductor QDs due to their tunable band gaps and high photoluminescence activity. However, GQDs have superior characteristics due to their excellent biocompatibility, low toxicity, good water dispersibility, large optical absorptivity, high fluorescence activity and photostability. These properties have generated significant interest in GQDs applications in various fields: nanosensor fabrication, drug delivery, photocatalysis, photovoltaics, and photodynamic therapy. Numerous GQD-based nanocomposites/nanohybrides have been synthesized and/or studied computationally. This review focuses on recent computational studies of various GQD-based nanocomposites/nanohybrides and systems which can be related to them.

High-performance and wearable hazardous gases sensor based on n-n heterojunction film of NGO and tetrakis(1-pyrenyl)porphyrin

The popularity of "Internet of Things" and portable electronic devices creates unprecedented demands for wearable gas sensors with excellent performance. In this study, the flexible n-n heterojunction film is firstly produced from metalloporphyrin complex 5,10,15,20-tetrakis(1-pyrenyl) porphyrin cobalt (II) (CoTPyrP) and nitrogen-doped graphene oxide (NGO) film, using solution-processing quasi-Langmuir-Shäfer (QLS) method and employed as the electrochemical identification layer for the wearable sensor. Thanks to the attractive electron-transfer properties from porphyrin to NGO, and the local regulation of electron transport by N and C atoms with different electronegativity on NGO, the resulting sensor shows good responses to NO₂, SO₂, NH₃, H₂S gases with the low detection limit (LOD) of 6, 74, 113 and 178 ppb, respectively. The uniform and compact structure of the heterojunction films provide excellent mechanical flexibility and suppress the penetration of gases into the film to obtain fast recovery speed. In addition, a sensor array consisting of NGO/CoTPyrP heterojunction and CoTPyrP film sensor is established, achieving selective identification of four hazardous gases. The present work provides potential application for hazardous gases identification in actual systems, and proposes an effective method to develop new flexible n-n heterojunctions for wearable gas sensors.

Graphene and carbon nanotubes interfaced electrochemical nanobiosensors for the detection of SARS-CoV-2 (COVID-19) and other respiratory viral infections: A review

Recent COVID-19 pandemic has claimed millions of lives due to lack of a rapid diagnostic tool. Global scientific community is now making joint efforts on developing rapid and accurate diagnostic tools for early detection of viral infections to preventing future outbreaks. Conventional diagnostic methods for virus detection are expensive and time consuming. There is an immediate requirement for a sensitive, reliable, rapid and easy-to-use Point-of-Care (PoC) diagnostic technology. Electrochemical biosensors have the potential to fulfill these requirements, but they are less sensitive for sensing viruses/viral infections. However, sensitivity and performance of these electrochemical platforms can be improved by integrating carbon nanostructure, such as graphene and carbon nanotubes (CNTs). These nanostructures offer excellent electrical property, biocompatibility, chemical stability, mechanical strength and, large surface area that are most desired in developing PoC diagnostic tools for detecting viral infections with speed, sensitivity, and cost-effectiveness. This review summarizes recent advancements made toward integrating graphene/CNTs nanostructures and their surface modifications useful for developing new generation of electrochemical nanobiosensors for detecting viral infections. The review also provides prospects and considerations for extending the graphene/CNTs based electrochemical transducers into portable and wearable PoC tools that can be useful in preventing future outbreaks and pandemics.

Insights into carbon nanotube-assisted electro-oxidation of polycyclic aromatic hydrocarbons for mediated bioelectrocatalysis

A series of polycyclic aromatics, naphthalene, phenanthrene, perylene, pyrene, 1-pyrenebutyric acid N-hydroxysuccinimide ester (pyrene NHS) and coronene, were immobilized via π stacking on carbon nanotube (CNT) electrodes and electro-oxidized in aqueous solutions. The obtained quinones were characterized and evaluated for the mediated electron transfer with FAD dependent glucose dehydrogenase during catalytic glucose oxidation.

Enhanced liquid phase exfoliation of graphene in water using an insoluble bis-pyrene stabiliser

Stabilisers, such as surfactants, polymers and polyaromatic molecules, offer an effective way to produce graphene dispersions in water by Liquid Phase Exfoliation (LPE) without degrading the properties of graphene. In particular, pyrene derivatives provide better exfoliation efficiency than traditional surfactants and polymers. A stabiliser is expected to be relatively soluble in order to disperse hydrophobic graphene in water. Here, we show that exfoliation can also be achieved with insoluble pyrene stabilisers if appropriately designed. In particular, bis-pyrene stabilisers (BPSs) functionalised with pyrrolidine provide a higher exfoliation efficiency and percentage of single layers compared to traditional pyrene derivatives under the same experimental conditions. This is attributed to the enhanced interactions between BPS and graphene, provided by the presence of two pyrene binding groups. This approach is therefore attractive not only to produce highly concentrated graphene, but also to use graphene to disperse insoluble molecules in water. The enhanced adsorption of BPS on graphene, however, is reflected in higher toxicity towards human epithelial bronchial immortalized cells, limiting the use of this material for biomedical applications.

Dispersant-assisted liquid-phase exfoliation of 2D materials beyond graphene

The extensive research on liquid-phase exfoliation (LPE) performed in the last 10 years has enabled a low cost and mass scalable approach to the successful production of a range of solution-processed 2-dimensional (2D) materials suitable for many applications, from composites to energy storage and printed electronics. However, direct LPE requires the use of specific solvents, which are typically toxic and expensive. Dispersant-assisted LPE allows us to overcome this problem by enabling production of solution processed 2D materials in a wider range of solvents, including water. This approach is based on the inclusion of an additive, typically an amphiphilic molecule, designed to interact with both the nanosheet and the solvent, enabling exfoliation and stabilization at the same time. This method has been extensively used for the LPE of graphene and has been discussed in many reviews, whilst little attention has been given to dispersant-assisted LPE of 2D materials beyond graphene. Considering the increasing number of 2D materials and their potential in many applications, from nanomedicine to energy storage and catalysis, this review focuses on the dispersant-assisted LPE of transition metal dichalcogenides (TMDs), hexagonal boron nitride (h-BN) and less studied 2D materials. We first provide an introduction to the fundamentals of LPE and the type of dispersants that have been used for the production of graphene, we then discuss each class of 2D material, providing an overview on the concentration and properties of the nanosheets obtained. Finally, a perspective is given on some of the challenges that need to be addressed in this field of research.

APEX Strategy Represented by Diels-Alder Cycloadditions-New Opportunities for the Syntheses of Functionalised PAHs

Diels-Alder cycloaddition of various dienophiles to the bay region of polycyclic aromatic hydrocarbons (PAHs) is a particularly effective and useful tool for the modification of the structure of PAHs and thereby their final properties. The Diels-Alder cycloaddition belongs to the single-step annulative π-extension (APEX) reactions and represents the maximum in synthetic efficiency for the constructions of π-extended PAHs including functionalised ones, nanographenes, and π-extended fused heteroarenes. Herein we report new applications of the APEX strategy for the synthesis of derivatives of 1,2-diarylbenzo[ghi]perylene, 1,2-diarylbenzo[ghi]perylenebisimide and 1,2-disubstituted-benzo[j]coronene. Namely, the so far unknown cycloaddition of 1,2-diarylacetylenes into the perylene and perylenebisimide bay regions was used. 1,2-Disubstituted-benzo[j]coronenes were obtained via cycloaddition of benzyne into 1,2-diarylbenzo[ghi]perylenes by using a new highly effective system for benzyne generation and/or high pressure conditions. Moreover, we report an unprecedented Diels-Alder cycloaddition-cycloaromatisation domino-type reaction between 1,4-(9,9-dialkylfluoren-3-yl)-1,3-butadiynes and perylene. The obtained diaryl-substituted core-extended PAHs were characterised by DFT calculation as well as electrochemical and spectroscopic measurements.

Stable, concentrated, biocompatible, and defect-free graphene dispersions with positive charge

The outstanding properties of graphene offer high potential for biomedical applications. In this framework, positively charged nanomaterials show better interactions with the biological environment, hence there is strong interest in the production of positively charged graphene nanosheets. Currently, production of cationic graphene is either time consuming or producing dispersions with poor stability, which strongly limit their use in the biomedical field. In this study, we made a family of new cationic pyrenes, and have used them to successfully produce water-based, highly concentrated, stable, and defect-free graphene dispersions with positive charge. The use of different pyrene derivatives as well as molecular dynamics simulations allowed us to get insights on the nanoscale interactions required to achieve efficient exfoliation and stabilisation. The cationic graphene dispersions show outstanding biocompatibility and cellular uptake as well as exceptional colloidal stability in the biological medium, making this material extremely attractive for biomedical applications.

A versatile route to edge-specific modifications to pristine graphene by electrophilic aromatic substitution

Electrophilic aromatic substitution produces edge-specific modifications to CVD graphene and graphene nanoplatelets that are suitable for specific attachment of biomolecules.

Exfoliation of 2D Materials for Energy and Environmental Applications

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.

Structural Optimization of Alkylbenzenes as Graphene Dispersants

Among the several methods of producing graphene, the liquid-phase exfoliation of graphite is attractive because of a simple and easy procedure, being expected for mass production. The dispersibility of graphene can be improved by adding a dispersant molecule that interacts with graphene, but the appropriate molecular design has not been proposed. In this study, we focused on aromatic compounds with alkyl chains as dispersing agents. We synthesized a series of alkyl aromatic compounds and evaluated their performance as a dispersant for graphene. The results suggest that the alkyl chain length and solubility in the solvent play a vital role in graphene dispersion.

Energy and cost-efficient nano-Ru-based perovskites/RGO composites for application in high performance supercapacitors

Nano-Ru-based perovskites RGO are prepared simultaneously in presence of various A-metal salts (A = Sr, Ba or Ca salts) using two different methods for reaction initiation. No further calcination step is needed for the formation of well-defined perovskite structure. Graphene oxide (GO) is used as a fuel to prepare various Ru-based perovskites for the first time. The resulted low-Ru content nanocomposites are used as supercapacitor electrodes in a neutral electrolyte (1.0 M NaNO₃). The results show that the specific capacitance of the resulted nanocomposites strongly depends on the method of their preparation as well as the type of A-site of the nanocomposites. Ru-based perovskites RGO nanocomposites that are prepared by combustion method show higher specific capacitance than those prepared by microwave irradiation. The maximum specific capacitance of Sr-, Ba- and Ca-RG-C composites at scan rate 2 mV s^-1 are 564 (598 mF cm^-2), 460 (487 mF cm^-2) and 316 (336 mF cm^-2) F g^-1, respectively. This value is higher than our previous work using a physical mixture between the individually prepared RGO and SrRuO₃. Lowest values for specific capacitance are obtained when using CaRuO₃/RGO prepared using microwave-assisted method (Ca-RG-M). The resulted A-RG-nanocomposites show very high cycling stability and good specific capacitance compared to other Ru-based structures previously reported in the literature. A correlation is defined between the structure and specific capacitance of the nanocomposites. It is confirmed that the nanocomposite size, morphology and distribution over the RGO matrix influence the supercapacitor characteristics.

Nanographene favors electronic interactions with an electron acceptor rather than an electron donor in a planar fused push-pull conjugate

A combination of a preexfoliated nanographene (NG) dispersion and fused electron donor-acceptor tetrathiafulvalene-perylenediimide (TTF-PDI) results in a noncovalent functionalization of NG. Such novel types of nanohybrids were characterized by complementary spectroscopic and microscopic techniques. The design strategy of the chromophoric and electroactive molecular conjugate renders a large and planar π-extended system with a distinct localization of electron-rich and electron-poor parts at either end of the molecular conjugate. Within the in situ formed nanohybrid, the conjugate was found to couple electronically with NG preferentially through the electron accepting PDI rather than the electron donating TTF and to form the one-electron reduced form of PDI, which corresponds to p-doping of graphene.

Nanographene and Graphene Nanoribbon Synthesis via Alkyne Benzannulations

The extension of π-conjugation of polycyclic aromatic hydrocarbons (PAHs) via alkyne benzannulation reactions has become an increasingly utilized tool over the past few years. This short review will highlight recent work of alkyne benzannulations in the context of large nanographene as well as graphene nanoribbon synthesis along with a brief discussion of the interesting physical properties these molecules display.

PAMAM Dendrimer Modified Reduced Graphene Oxide Postfunctionalized by Horseradish Peroxidase for Biosensing H2O2

In this chapter, we describe the tethering of horseradish peroxidase (HRP) to reduced graphene oxide (RGO) for sensing H₂O₂ in serum. To accomplish this, RGO was synthesized through a green route by reducing graphene oxide (GO) prepared by Hummers method with carrot extract. The RGO was then covalently functionalized by electrochemical amination using fourth generation, amine-terminated PAMAM dendrimers. Subsequently, HRP was postfunctionalized through glutaraldehyde linkage. The synthesized RGO and the functionalization steps were well characterized by spectroscopic, microscopic, and electrochemical techniques. The application of HRP tethered RGO was demonstrated for H₂O₂ sensing in blood serum. This work provides scope for extending this functionalization strategy for other carbonaceous materials as well.

Robust Nanowrapping of Reduced Graphene Oxide by Metal-Organic Network Films between Fe Ions and Tetra(Catechol-Substituted) Porphyrin

We found the utilization of porphyrin-based metal-organic network films composed of tetra(catechol-substituted)porphyrin (cPor) and Fe ions for robust wrapping materials of graphene oxide (GO), which can keep the dispersion state under the chemical reduction of GO to reduced graphene oxide (rGO) in water. The tetra(catechol-substituted)porphyrin (cPor) was designed for soft-wrapping methods because the aromatic porphyrin moieties can be strongly adsorbed onto the surface of GO or rGO via both π-π interactions and the catechol-Fe coordination network formation. The GO sheets covered with the cPor-Fe films were reduced chemically in water under retention of the wrapped nanostructure of the cPor-Fe/GO sheets. The obtained rGO composites after chemical reduction are characterized by using UV-vis absorption, Raman, and X-ray photoelectron spectroscopy (XPS) spectra, as well as thermogravimetric analysis and energy-dispersive X-ray spectroscopy (EDX). XPS and EDX spectra showed the presence of Fe species, which originates from the coordinated Fe-catechol nodes in the wrapped cPor-Fe films. The wrapped rGO sheets could be easily handled in water because of their high solubility therein and exhibits electric conductivity. In dynamic light scattering analysis, the average diameter of rGO composites before and after reduction changed slightly from 419 ± 309 to 663 ± 697 nm, indicating that the chemical reduction is not significantly influenced by the size of the rGO composite or the solubility. It is expected that the soft wrapping cPor-Fe/rGO should employ the applications to prepare functional materials such as modified electrodes, catalysts, energy-storage materials, and electronic devices.

Scalable exfoliation and dispersion of two-dimensional materials - an update

The preparation of dispersions of single- and few-sheet 2D materials in various solvents, as well as the characterization methods applied to such dispersions, is critically reviewed. Motivating factors for producing single- and few-sheet dispersions of 2D materials in liquids are briefly discussed. Many practical applications are expected for such materials that do not require high purity formulations and tight control of donor and acceptor concentrations, as required in conventional Fab processing of semiconductor chips. Approaches and challenges encountered in exfoliating 2D materials in liquids are reviewed. Ultrasonication, mechanical shearing, and electrochemical processing approaches are discussed, and their respective limitations and promising features are critiqued. Supercritical and more conventional liquid and solvent processing are then discussed in detail. The effects of various types of stabilizers, including surfactants and other amphiphiles, as well as polymers, including homopolymeric electrolytes, nonionic polymers, and nanolatexes, are discussed. Consideration of apparent successes of stabilizer-free dispersions indicates that extensive exfoliation in the absence of dispersing aids results from processing-induced surface modifications that promote stabilization of 2D material/solvent interactions. Also apparent paradoxes in "pristineness" and optical extinctions in dispersions suggest that there is much we do not yet quantitatively understand about the surface chemistry of these materials. Another paradox, emanating from modeling dilute solvent-only exfoliation by sonication using polar components of solubility parameters and surface tension for pristine graphene with no polar structural component, is addressed. This apparent paradox appears to be resolved by realizing that the reactivity of graphene to addition reactions of solvent radicals produced by sonolysis is accompanied by unintended polar surface modifications that promote attractive interactions with solvent. This hypothesis serves to define important theoretical and experimental studies that are needed. We conclude that the greatest promise for high volume and high concentration processing lies in applying methods that have not yet been extensively reported, particularly wet comminution processing using small grinding media of various types.

Catalytic activity of biomimetic model of cytochrome P450 in oxidation of dopamine

The introduction of electron-withdrawing group into porphyrin molecule as cytochrome P450 model can tune the energy level and have an effect on the electronic structure. In this work, linking with the strong electron-withdrawing fluorine atoms, a starburst dendritic molecule, 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin iron (III) chloride (FeTFPP), containing a saddle-shaped porphyrin as the central core and four pentafluorophenyl rings as the peripheral functional groups was successfully synthesized. Subsequently, the macrocyclic conjugate polymer film of FeTFPP was achieved via a low-cost electrochemical method and exploited as an efficient mimetic enzyme. Furthermore, a biomimetic sensor was constructed by the poly(FeTFPP) film and graphene (rGO) sheet (rGO-poly(FeTFPP)) for selective and sensitive detection of dopamine (DA). Here, the FeTFPP polymer performs three functions: electrochemical recognition (owing to the hydrogen bonding between the strongly electronegative fluorine atoms and DA), biomimetic microenvironment (owing to interaction between porphyrin core and DA), electrocatalysis (owing to remarkable catalytic ability of iron (III) ion). Under optimum conditions, the response to DA was linear in the concentration range between 0.05 to 300μM, and the detection limit was 0.023μM. In addition, we applied the rGO-poly(FeTFPP) film to detect DA in real samples and the results implied its feasibility for practical application. As a result, it is believed that the rGO-poly(FeTFPP) film is one of the promising biomimetic catalysts for electrocatalysis and relevant fields.

Formation of toroids by self-assembly of an α-α corner mimetic: supramolecular cyclization

An α-α corner mimetic self-assembles to form a rod-like supramolecular structure which bends and closes end-to-end like a cyclization reaction to form uniform toroids. Each peptide fragment containing l-leucine, α-aminoisobutyric acid (Aib) and l-tyrosine forms rigid 3₁₀ helical structures stabilized by multiple intramolecular N-HO hydrogen bonds. Two 3₁₀ helices are connected by the spacer 3-aminomethyl-benzylamine and maintain an angular distance of 120° and therefore mimic the α-α corner motif of a protein super secondary structure. The individual α-α corner subunits are themselves regularly interlinked through multiple water mediated intermolecular hydrogen-bonding interactions to form the rod-like supramolecular structure and toroids. The formation of the supramolecular structure has been proven with X-ray crystallography and other spectroscopic techniques. The cyclization of the supramolecular structure and toroid formation were studied by optical microscope, AFM and FE-SEM experiments. Despite other assignments such as exfoliation of graphene from graphite, the compound exhibits significant memory to finally produce the toroids.

Chemical Functionalization of Graphene Family Members

Thanks to their outstanding physicochemical properties, graphene and its derivatives are interesting nanomaterials with a high potential in several fields. Graphene, graphene oxide, and reduced graphene oxide, however, differ partially in their characteristics due to their diverse surface composition. Those differences influence the chemical reactivity of these materials. In the following chapter the reactivity and main functionalization reactions performed on graphene, graphene oxide, and reduced graphene oxide are discussed. A part is also dedicated to the main analytical techniques used for characterization of these materials. Functionalization of graphene and its derivatives is highly important to modulate their characteristics and design graphene-based conjugates with novel properties. Functionalization can be covalent by forming strong and stable bonds with the graphene surface, or non-covalent via π–π, electrostatic, hydrophobic, and/or van der Waals interactions. Both types of functionalization are currently exploited.

Sheetlike gold nanostructures/graphene oxide composites via a one-pot green fabrication protocol and their interesting two-stage catalytic behaviors

Au nanoplate/GO composites are facilely synthesized via a one-pot green protocol. The composites display a fascinating two-stage catalytic behavior, where the catalytic reactivity of the latter stage increases substantially by a factor of 9 times.

Exfoliation and supramolecular functionalization of graphene with an electron donor perylenediimide derivative

Exfoliation of graphene with 1-N-methylpiperazine-perylenediimide (Pip-PDI) and supramolecular formation of Pip-PDI/graphene ensembles.

Graphene via Molecule-Assisted Ultrasound-Induced Liquid-Phase Exfoliation: A Supramolecular Approach

Graphene is a two-dimensional (2D) material holding unique optical, mechanical, thermal and electrical properties. The combination of these exceptional characteristics makes graphene an ideal model system for fundamental physical and chemical studies as well as technologically ground breaking material for a large range of applications. Graphene can be produced either following a bottom-up or top-down method. The former is based on the formation of covalent networks suitably engineered molecular building blocks undergoing chemical reaction. The latter takes place through the exfoliation of bulk graphite into individual graphene sheets. Among them, ultrasound-induced liquid-phase exfoliation (UILPE) is an appealing method, being very versatile and applicable to different environments and on various substrate types. In this chapter, we describe the recently reported methods to produce graphene via molecule-assisted UILPE of graphite, aiming at the generation of high-quality graphene. In particular, we will focus on the supramolecular approach, which consists in the use of suitably designed organic molecules during the UILPE of graphite. These molecules act as graphene dispersion-stabilizing agents during the exfoliation. This method relying on the joint effect of a solvent and ad hoc molecules to foster the exfoliation of graphite into graphene in liquid environment represents a promising and modular method toward the improvement of the process of UILPE in terms of the concentration and quality of the exfoliated material. Furthermore, exfoliations in aqueous and organic solutions are presented and discussed separately.

Reactions of HDDA-Derived Benzynes with Perylenes: Rapid Construction of Polycyclic Aromatic Compounds

Benzynes produced by the thermal cycloisomerization of tetrayne substrates [i.e., by the hexadehydro-Diels-Alder (HDDA) reaction] react with perylenes to produce novel naphthoperylene derivatives. Cyclic voltammetry and absorption and emission properties of these compounds are described. DFT studies shed additional light on the dearomatization that accompanies the reaction as well as some of the spectroscopic behavior.

Correlating synergistic reinforcement with chain motion in elastomer/nanocarbon hybrids composites

The strategy of using hybrid fillers with different geometric shapes and aspect ratios has been established to be an efficient way to achieve high-performance polymer composites. While, in spite of the recently renowned advances in this field, the mechanism of synergistic behavior in the system is still unclear and equivocal. In this study, we systematically investigated the mechanism for the synergistic reinforcement in an elastomer reinforced by nanocarbon hybrids consisting of 2D reduced graphene oxide (rGO) and 1D carbon nanotubes (CNTs). The improved dispersion state of hybrid filler was attested by Raman, UV-Vis spectra and morphological observations. In addition to the phenomenological evidences, we substantiated a stronger confinement effect of hybrid network on chain dynamics, for the first time, with molecular concepts by dielectric relaxation analysis. The formation of a glassy interphase with orders of magnitude slower chain dynamics than that for bulk chains has been explicitly demonstrated in the hybrid system. Besides improved dispersion upon hybridization, it is believed the formation of a glassy interphase is another crucial factor in governing the synergistic reinforcement capability of hybrid composites. We envision this new finding provides significant insight into the mechanism of synergistic behavior in hybrid-filled polymer composites with molecular concepts.

Supramolecular Approaches to Graphene: From Self-Assembly to Molecule-Assisted Liquid-Phase Exfoliation

Graphene, a one-atom thick two-dimensional (2D) material, is at the core of an ever-growing research effort due to its combination of unique mechanical, thermal, optical and electrical properties. Two strategies are being pursued for the graphene production: the bottom-up and the top-down. The former relies on the use of covalent chemistry approaches on properly designed molecular building blocks undergoing chemical reaction to form 2D covalent networks. The latter occurs via exfoliation of bulk graphite into individual graphene sheets. Amongst the various types of exfoliations exploited so far, ultrasound-induced liquid-phase exfoliation (UILPE) is an attractive strategy, being extremely versatile, up-scalable and applicable to a variety of environments. In this review, we highlight the recent developments that have led to successful non-covalent functionalization of graphene and how the latter can be exploited to promote the process of molecule-assisted UILPE of graphite. The functionalization of graphene with non-covalently interacting molecules, both in dispersions as well as in dry films, represents a promising and modular approach to tune various physical and chemical properties of graphene, eventually conferring to such a 2D system a multifunctional nature.

Noncovalent Interaction of Graphene with Heterocyclic Compounds: Benzene, Imidazole, Tetracene, and Imidazophenazines

Noncovalent functionalization of graphene with organic molecules offers a direct route to multifunctional modification of this nanomaterial, leading to its various possible practical applications. In this work, the structures of hybrids formed by linear heterocyclic compounds such as imidazophenazine (F1) and its derivatives (F2-F4) with graphene and the corresponding interaction energies are studied by using the DFT method. Special attention is paid to the hybrids where the attached molecule is located along the graphene zigzag (GZZ ) and armchair (GAC ) directions. The interaction energies corresponding to the graphene hybrids of the F1-F4 compounds for the two directions are found to be distinct, while tetracene (being a symmetrical molecule) shows a small difference between these binding energies. It is found that the back-side CH3 and CF3 groups have an important influence on the arrangements of F1 derivatives on graphene and on their binding energies. The contribution of the CF3 group to the total binding energy of the F3 molecule with graphene is the largest (3.4 kcal mol(-1) ) (the GZZ direction) while the CH3 group increases this energy of F2 only by 2.0 kcal mol(-1) (the GAC direction). It is shown that replacing the carbons with other atoms or adding a back-side group enables one to vary the polarizability of graphene.

Production of Two-Dimensional Nanomaterials via Liquid-Based Direct Exfoliation

Tremendous efforts have been devoted to the synthesis and application of two-dimensional (2D) nanomaterials due to their extraordinary and unique properties in electronics, photonics, catalysis, etc., upon exfoliation from their bulk counterparts. One of the greatest challenges that scientists are confronted with is how to produce large quantities of 2D nanomaterials of high quality in a commercially viable way. This review summarizes the state-of-the-art of the production of 2D nanomaterials using liquid-based direct exfoliation (LBE), a very promising and highly scalable wet approach for synthesizing high quality 2D nanomaterials in mild conditions. LBE is a collection of methods that directly exfoliates bulk layered materials into thin flakes of 2D nanomaterials in liquid media without any, or with a minimum degree of, chemical reactions, so as to maintain the high crystallinity of 2D nanomaterials. Different synthetic methods are categorized in the following, in which material characteristics including dispersion concentration, flake thickness, flake size and some applications are discussed in detail. At the end, we provide an overview of the advantages and disadvantages of such synthetic methods of LBE and propose future perspectives.

Nano-Bioelectronics

Nano-bioelectronics represents a rapidly expanding interdisciplinary field that combines nanomaterials with biology and electronics and, in so doing, offers the potential to overcome existing challenges in bioelectronics. In particular, shrinking electronic transducer dimensions to the nanoscale and making their properties appear more biological can yield significant improvements in the sensitivity and biocompatibility and thereby open up opportunities in fundamental biology and healthcare. This review emphasizes recent advances in nano-bioelectronics enabled with semiconductor nanostructures, including silicon nanowires, carbon nanotubes, and graphene. First, the synthesis and electrical properties of these nanomaterials are discussed in the context of bioelectronics. Second, affinity-based nano-bioelectronic sensors for highly sensitive analysis of biomolecules are reviewed. In these studies, semiconductor nanostructures as transistor-based biosensors are discussed from fundamental device behavior through sensing applications and future challenges. Third, the complex interface between nanoelectronics and living biological systems, from single cells to live animals, is reviewed. This discussion focuses on representative advances in electrophysiology enabled using semiconductor nanostructures and their nanoelectronic devices for cellular measurements through emerging work where arrays of nanoelectronic devices are incorporated within three-dimensional cell networks that define synthetic and natural tissues. Last, some challenges and exciting future opportunities are discussed.

Synergetic catalysis based on the proline tailed metalloporphyrin with graphene sheet as efficient mimetic enzyme for ultrasensitive electrochemical detection of dopamine

In this paper, linking with the butoxycarbonyl (BOC) protection of proline, a new tailed metalloporphyrin with many useful active functions, nickel (II) 5-[4-N-(tert-Butoxycarbonyl)-l-prolinecoxylpropyloxy]phenyl-10,15,20-triphenylporphyrin (NiTBLPyP), was designed and synthesized. And the NiTBLPyP polymer (poly(NiTBLPyP)) was successfully obtained via a low-cost electrochemical method and exploited as an efficient mimic enzyme. Subsequently, a noncovalent nanohybrid of poly(NiTBLPyP) with graphene (rGO) sheet (rGO-poly(NiTBLPyP)) was prepared through π-π stacking interaction for the ultrasensitive and selective detection of DA. The nanohybrid was characterized by UV-vis spectroscopy, Fourier transform infrared spectra, Raman spectroscopy, scanning electron microscopy and electrochemical impedance spectroscopy. Due to the excellent electrocatalytic ability of poly(NiTBLPyP) film and aromatic π-π stacking interaction between poly(NiTBLPyP and rGO sheet, the obtained rGO-poly(NiTBLPyP) film exhibited a great synergistic amplification effect toward dopamine oxidation. Under optimum experimental conditions, the logarithm of catalytic currents showed a good linear relationship with that of the dopamine concentration in the range of 0.01-200 μM with a low detection limit of 1.40 nM. With good sensitivity and selectivity, the present method was applied to the determination of DA in real sample and the results was satisfactory. Thus, the rGO-poly(NiTBLPyP) film is one of the promising mimetic enzyme for electrocatalysis and relevant fields.

Surfactant mediated liquid phase exfoliation of graphene

Commercialization of graphene based applications inevitably requires cost effective mass production. From the early days of research on graphene, direct liquid phase exfoliation (LPE) of graphite has been considered as the most promising strategy to produce high-quality mono or few-layer graphene sheets in solvent dispersion forms. Substantial success has been achieved thus far in the LPE of graphene employing numerous solvent systems and suitable surfactants. This invited review article principally showcase the recent research progress as well as shortcomings of surfactant assisted LPE of graphene. In particular, a comprehensive assessment of the quality and yield of the graphene sheets produced by different categories of the surfactants are summarized. Future direction of LPE methods is also proposed for the eventual success of commercial applications.

One-pot liquid-phase exfoliation from graphite to graphene with carbon quantum dots

Carbon quantum dots (CQDs) are novel carbon nanomaterials and are attracting increasing interest due to their good characteristics such as hydrophilicity, chemical stability, quantum yield, small particle sizes, and low cytotoxicity. Herein, we used CQDs as stabilizers and exfoliation agents to exfoliate graphite to graphene in an aqueous medium for the first time. The functions of CQDs are to reduce the surface tension of water to match that of graphite and to make weak interactions (π-π conjugation, hydrophobic force, and the Coulomb attraction) with the graphite surface. Different characterization methods were used to evaluate the presence of layers (<5 layers) of graphene sheets with fewer defects and low oxidation. In the future, CQDs can also be good candidates to exfoliate other two-dimensional materials, such as WS2, BN, MoS2, and g-C3N4, to form two-dimensional heterostructures for a range of possible applications.